This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bitmap index is a `.bitmap` file that can be found inside
`$GIT_DIR/objects/pack/`, next to its corresponding packfile, and
contains precalculated reachability information for selected commits.
The full specification of the format for these bitmap indexes can be found
in `Documentation/technical/bitmap-format.txt`.
For a given commit SHA1, if it happens to be available in the bitmap
index, its bitmap will represent every single object that is reachable
from the commit itself. The nth bit in the bitmap is the nth object in
the packfile; if it's set to 1, the object is reachable.
By using the bitmaps available in the index, this commit implements
several new functions:
- `prepare_bitmap_git`
- `prepare_bitmap_walk`
- `traverse_bitmap_commit_list`
- `reuse_partial_packfile_from_bitmap`
The `prepare_bitmap_walk` function tries to build a bitmap of all the
objects that can be reached from the commit roots of a given `rev_info`
struct by using the following algorithm:
- If all the interesting commits for a revision walk are available in
the index, the resulting reachability bitmap is the bitwise OR of all
the individual bitmaps.
- When the full set of WANTs is not available in the index, we perform a
partial revision walk using the commits that don't have bitmaps as
roots, and limiting the revision walk as soon as we reach a commit that
has a corresponding bitmap. The earlier OR'ed bitmap with all the
indexed commits can now be completed as this walk progresses, so the end
result is the full reachability list.
- For revision walks with a HAVEs set (a set of commits that are deemed
uninteresting), first we perform the same method as for the WANTs, but
using our HAVEs as roots, in order to obtain a full reachability bitmap
of all the uninteresting commits. This bitmap then can be used to:
a) limit the subsequent walk when building the WANTs bitmap
b) finding the final set of interesting commits by performing an
AND-NOT of the WANTs and the HAVEs.
If `prepare_bitmap_walk` runs successfully, the resulting bitmap is
stored and the equivalent of a `traverse_commit_list` call can be
performed by using `traverse_bitmap_commit_list`; the bitmap version
of this call yields the objects straight from the packfile index
(without having to look them up or parse them) and hence is several
orders of magnitude faster.
As an extra optimization, when `prepare_bitmap_walk` succeeds, the
`reuse_partial_packfile_from_bitmap` call can be attempted: it will find
the amount of objects at the beginning of the on-disk packfile that can
be reused as-is, and return an offset into the packfile. The source
packfile can then be loaded and the bytes up to `offset` can be written
directly to the result without having to consider the entires inside the
packfile individually.
If the `prepare_bitmap_walk` call fails (e.g. because no bitmap files
are available), the `rev_info` struct is left untouched, and can be used
to perform a manual rev-walk using `traverse_commit_list`.
Hence, this new set of functions are a generic API that allows to
perform the equivalent of
git rev-list --objects [roots...] [^uninteresting...]
for any set of commits, even if they don't have specific bitmaps
generated for them.
In further patches, we'll use this bitmap traversal optimization to
speed up the `pack-objects` and `rev-list` commands.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
EWAH is a word-aligned compressed variant of a bitset (i.e. a data
structure that acts as a 0-indexed boolean array for many entries).
It uses a 64-bit run-length encoding (RLE) compression scheme,
trading some compression for better processing speed.
The goal of this word-aligned implementation is not to achieve
the best compression, but rather to improve query processing time.
As it stands right now, this EWAH implementation will always be more
efficient storage-wise than its uncompressed alternative.
EWAH arrays will be used as the on-disk format to store reachability
bitmaps for all objects in a repository while keeping reasonable sizes,
in the same way that JGit does.
This EWAH implementation is a mostly straightforward port of the
original `javaewah` library that JGit currently uses. The library is
self-contained and has been embedded whole (4 files) inside the `ewah`
folder to ease redistribution.
The library is re-licensed under the GPLv2 with the permission of Daniel
Lemire, the original author. The source code for the C version can
be found on GitHub:
https://github.com/vmg/libewok
The original Java implementation can also be found on GitHub:
https://github.com/lemire/javaewah
[jc: stripped debug-only code per Peff's $gmane/239768]
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the built-in "git tar-tree" command (a thin wrapper around "git
archive") was removed in 925ceccf (tar-tree: remove deprecated
command, 2013-11-10), the build continued to install a non-functioning
git-tar-tree command in gitexecdir by mistake:
$ PATH=$(git --exec-path):$PATH
$ git-tar-tree -h
fatal: cannot handle tar-tree internally
The list of links in gitexecdir is populated from BUILTIN_OBJS, which
includes builtin/tar-tree.o to implement "git get-tar-commit-id".
Rename the get-tar-commit-id source file to builtin/get-tar-commit-id.c
to reflect its purpose and fix 'make install'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms ship Perl modules used by git scripts outside the
default perl path (e.g., on Mac OS X, Subversion's perl bindings live
in a separate xcode perl path). Add an PERLLIB_EXTRA variable to hold
a colon-separated list of extra directories to add to the perl path in
git's scripts, as a convenience for packagers.
Requested-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing hashtable implementation (in hash.[ch]) uses open addressing
(i.e. resolve hash collisions by distributing entries across the table).
Thus, removal is difficult to implement with less than O(n) complexity.
Resolving collisions of entries with identical hashes (e.g. via chaining)
is left to the client code.
Add a hashtable implementation that supports O(1) removal and is slightly
easier to use due to builtin entry chaining.
Supports all basic operations init, free, get, add, remove and iteration.
Also includes ready-to-use hash functions based on the public domain FNV-1
algorithm (http://www.isthe.com/chongo/tech/comp/fnv).
The per-entry data structure (hashmap_entry) is piggybacked in front of
the client's data structure to save memory. See test-hashmap.c for usage
examples.
The hashtable is resized by a factor of four when 80% full. With these
settings, average memory consumption is about 2/3 of hash.[ch], and
insertion is about twice as fast due to less frequent resizing.
Lookups are also slightly faster, because entries are strictly confined to
their bucket (i.e. no data of other buckets needs to be traversed).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been deprecated since commit 87194d2 (Deprecate peek-remote,
2007-11-24), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git lost-found" has been deprecated since commit fc8b5f0 (Deprecate
git-lost-found, 2007-11-08), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The release notes for Git 1.5.4 say that "git repo-config" will be
removed in the next feature release. Since Git 2.0 is nearly here,
remove it.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hash table that stores the packing list for a given `pack-objects`
run was tightly coupled to the pack-objects code.
In this commit, we refactor the hash table and the underlying storage
array into a `packing_data` struct. The functionality for accessing and
adding entries to the packing list is hence accessible from other parts
of Git besides the `pack-objects` builtin.
This refactoring is a requirement for further patches in this series
that will require accessing the commit packing list from outside of
`pack-objects`.
The hash table implementation has been minimally altered: we now
use table sizes which are always a power of two, to ensure a uniform
index distribution in the array.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite "git repack" in C.
* sb/repack-in-c:
repack: improve warnings about failure of renaming and removing files
repack: retain the return value of pack-objects
repack: rewrite the shell script in C
Sparse issues an "using sizeof on a function" warning for each
call to curl_easy_setopt() which sets an option that takes a
function pointer parameter. (currently 12 such warnings over 4
files.)
The warnings relate to the use of the "typecheck-gcc.h" header
file which adds a layer of type-checking macros to the curl
function invocations (for gcc >= 4.3 and !__cplusplus). As part
of the type-checking layer, 'sizeof' is applied to the function
parameter of curl_easy_setopt(). Note that, in the context of
sizeof, the function to function pointer conversion is not
performed and that sizeof(f) != sizeof(&f).
A simple solution, therefore, would be to replace the function
name in each such call to curl_easy_setopt() with an explicit
function pointer expression (i.e. replace f with &f).
However, the "typecheck-gcc.h" header file is only conditionally
included, in addition to the gcc and C++ checks mentioned above,
depending on the CURL_DISABLE_TYPECHECK preprocessor variable.
In order to suppress the warnings, we use target-specific variable
assignments to add -DCURL_DISABLE_TYPECHECK to SPARSE_FLAGS for
each file affected (http-push.c, http.c, http-walker.c and
remote-curl.c).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
The motivation of this patch is to get closer to a goal of being
able to have a core subset of git functionality built in to git.
That would mean
* people on Windows could get a copy of at least the core parts
of Git without having to install a Unix-style shell
* people using git in on servers with chrooted environments
do not need to worry about standard tools lacking for shell
scripts.
This patch is meant to be mostly a literal translation of the
git-repack script; the intent is that later patches would start using
more library facilities, but this patch is meant to be as close to a
no-op as possible so it doesn't do that kind of thing.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove now disused remote-helpers framework for helpers written in
Python.
* jk/remove-remote-helpers-in-python:
git_remote_helpers: remove little used Python library
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
Allow section.<urlpattern>.var configuration variables to be
treated as a "virtual" section.var given a URL, and use the
mechanism to enhance http.* configuration variables.
This is a reroll of Kyle J. McKay's work.
* jc/url-match:
builtin/config.c: compilation fix
config: "git config --get-urlmatch" parses section.<url>.key
builtin/config: refactor collect_config()
config: parse http.<url>.<variable> using urlmatch
config: add generic callback wrapper to parse section.<url>.key
config: add helper to normalize and match URLs
http.c: fix parsing of http.sslCertPasswordProtected variable
When it was originally added, the git_remote_helpers library was used as
part of the tests of the remote-helper interface, but since commit
fc407f9 (Add new simplified git-remote-testgit, 2012-11-28) a simple
shell script is used for this.
A search on Ohloh [1] indicates that this library isn't used by any
external projects and even the Python remote helpers in contrib/ don't
use this library, so it is only used by its own test suite.
Since this is the only Python library in Git, removing it will make
packaging easier as the Python scripts only need to be installed for one
version of Python, whereas the library should be installed for all
available versions.
[1] http://code.ohloh.net/search?s=%22git_remote_helpers%22
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/darwin:
OS X: Fix redeclaration of die warning
Makefile: Fix APPLE_COMMON_CRYPTO with BLK_SHA1
imap-send: use Apple's Security framework for base64 encoding
This reverts commit 6c642a8786.
The previous commit introduced a size limit on IO chunks on all
platforms. The compat clipped_write() is not needed anymore.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the urlmatch_config_entry() to wrap the underlying
http_options() two-level variable parser in order to set
http.<variable> to the value with the most specific URL in the
configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be that APPLE_COMMON_CRYPTO did nothing when BLK_SHA1 was
set. But APPLE_COMMON_CRYPTO is now used for more than just SHA1 (see
3ef2bca) so make sure that the appropriate libraries are always set.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin port added a "not quite correct but a lot faster and good
enough for many lstat() calls that are only used to see if the
working tree entity matches the index entry" lstat() emulation some
time ago, and it started biting us in places. This removes it and
uses the standard lstat() that comes with Cygwin.
Recent topic that uses lstat on packed-refs file is broken when
this cheating lstat is used, and this is a simplest fix that is
also the cleanest direction to go in the long run.
* rj/cygwin-clarify-use-of-cheating-lstat:
cygwin: Remove the Win32 l/stat() implementation
Use Apple's supported functions for base64 encoding instead
of the deprecated OpenSSL functions.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new command to allow scripts to query the mailmap information.
* es/check-mailmap:
t4203: test check-mailmap command invocation
builtin: add git-check-mailmap command
Commit adbc0b6b ("cygwin: Use native Win32 API for stat", 30-09-2008)
added a Win32 specific implementation of the stat functions. In order
to handle absolute paths, cygwin mount points and symbolic links, this
implementation may fall back on the standard cygwin l/stat() functions.
Also, the choice of cygwin or Win32 functions is made lazily (by the
first call(s) to l/stat) based on the state of some config variables.
Unfortunately, this "schizophrenic stat" implementation has been the
source of many problems ever since. For example, see commits 7faee6b8,
79748439, 452993c2, 085479e7, b8a97333, 924aaf3e, 05bab3ea and 0117c2f0.
In order to avoid further problems, such as the issue raised by the new
reference handling API, remove the Win32 l/stat() implementation.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce command check-mailmap, similar to check-attr and check-ignore,
which allows direct testing of .mailmap configuration.
As plumbing accessible to scripts and other porcelain, check-mailmap
publishes the stable, well-tested .mailmap functionality employed by
built-in Git commands. Consequently, script authors need not
re-implement .mailmap functionality manually, thus avoiding potential
quirks and behavioral differences.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script was added in 36e5e70 (Start deprecating "git-command" in
favor of "git command", 2007-06-30) with the intent of aiding the
transition away from dashed forms.
It has already been used to help the transision and served its
purpose, and is no longer very useful for follow-up work, because
the majority of remaining matches it finds are false positives.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log" learned the "--author-date-order" option, with which the
output is topologically sorted and commits in parallel histories
are shown intermixed together based on the author timestamp.
* jc/topo-author-date-sort:
t6003: add --author-date-order test
topology tests: teach a helper to set author dates as well
t6003: add --date-order test
topology tests: teach a helper to take abbreviated timestamps
t/lib-t6000: style fixes
log: --author-date-order
sort-in-topological-order: use prio-queue
prio-queue: priority queue of pointers to structs
toposort: rename "lifo" field
Mac OS X does not like to write(2) more than INT_MAX number of
bytes; work it around by chopping write(2) into smaller pieces.
* fc/macos-x-clipped-write:
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Make it possible to call into copy-notes API from the sequencer code.
* jh/libify-note-handling:
Move create_notes_commit() from notes-merge.c into notes-utils.c
Move copy_note_for_rewrite + friends from builtin/notes.c to notes-utils.c
finish_copy_notes_for_rewrite(): Let caller provide commit message
Makefile simplification.
* fc/makefile:
Makefile: use $^ to avoid listing prerequisites on the command line
build: do not install git-remote-testgit
build: generate and clean test scripts
This is a pure code movement of the machinery for copying notes to
rewritten objects. This code was located in builtin/notes.c for
historical reasons. In order to make it available to builtin/commit.c
it was declared in builtin.h. This was more of an accident of history
than a concious design, and we now want to make this machinery more
widely available.
Hence, this patch moves the code into the new notes-utils.[hc] files
which are included into libgit.a. Except for adjusting #includes
accordingly, this patch merely moves the relevant functions verbatim
into the new files.
Cc: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally we used a singly linked list of commits to hold a set
of in-flight commits while traversing history. The most typical use
of the list is to add commits that are newly discovered to it, keep
the list sorted by commit timestamp, pick up the newest one from the
list, and keep digging. The cost of keeping the singly linked list
sorted is nontrivial, and this typical use pattern better matches a
priority queue.
Introduce a prio-queue structure, that can be used either as a LIFO
stack, or a priority queue. This will be used in the next patch to
hold in-flight commits during sort-in-topological-order.
Tests and the idea to make it usable for any "void *" pointers to
"things" are by Jeff King. Bugs are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update build for Cygwin 1.[57]. Torsten Bögershausen reports that
this is fine with Cygwin 1.7 ($gmane/225824) so let's try moving it
ahead.
* rj/mingw-cygwin:
cygwin: Remove the CYGWIN_V15_WIN32API build variable
mingw: rename WIN32 cpp macro to GIT_WINDOWS_NATIVE
Add the helper test-read-cache, which can be used to call read_cache and
discard_cache in a loop as well as a performance check based on it.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to list again the prerequisites.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 416fda6 (build: do not install git-remote-testpy) made it so
git-remote-testpy is not only not installed, but also not generated
by default. From a fresh checkout, "make --test=5800 test" would
have failed.
This was not found primarily because "make clean" failed to remove
git-remote-testpy, which is another bug in the same commit.
Fix the former by having 'all' target depend on $(NO_INSTALL) and
the latter by removing $(NO_INSTALL) in the 'clean' target.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/transport-helper-error-reporting-fix:
git-remote-testgit: build it to run under $SHELL_PATH
git-remote-testgit: further remove some bashisms
git-remote-testgit: avoid process substitution
t5801: "VAR=VAL shell_func args" is forbidden
transport-helper: update remote helper namespace
transport-helper: trivial code shuffle
transport-helper: warn when refspec is not used
transport-helper: clarify pushing without refspecs
transport-helper: update refspec documentation
transport-helper: clarify *:* refspec
transport-helper: improve push messages
transport-helper: mention helper name when it dies
transport-helper: report errors properly
Conflicts:
t/t5801-remote-helpers.sh
This set of patches collects a number of build fixes that have been
used on the msysgit port for a while and merging upstream should
simplify future maintenance.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQCVAwUAUbEmnGB90JXwhOSJAQKRJgP/TdWucLnedP4tRKhRrwy3AnZ2Her4Mn5n
isrNQu3eixT3PsGzdyYUvTYLP8OPNfgYYVEzqyrRtNHKKSD2qLGXt8oyOw63z10n
tiDcHHCfI1U/W7GHK1Q9abaQz/PF6yWnYenRt9lnckyqtxNoa8o+eOCfuY9lBfNJ
ccTP/dRgoL0=
=uWg2
-----END PGP SIGNATURE-----
Merge tag 'post183-for-junio' of http://github.com/msysgit/git
Collected msysgit build patches for upstream
This set of patches collects a number of build fixes that have been
used on the msysgit port for a while and merging upstream should
simplify future maintenance.
* tag 'post183-for-junio' of http://github.com/msysgit/git:
Set the default help format to html for msys builds.
Ensure the resource file is rebuilt when the version changes.
Windows resource: handle dashes in the Git version gracefully
Provide a Windows version resource for the git executables.
msysgit: Add the --large-address-aware linker directive to the makefile.
Define NO_GETTEXT for Git for Windows
Makefile: Do not use OLD_ICONV on MINGW anymore
Update Makefile to use handy automatic variables where appropriate,
and stop installing a script that is only used for testing.
* fc/makefile:
build: do not install git-remote-testpy
build: add NO_INSTALL variable
build: cleanup using $<
build: cleanup using $^
build: trivial simplification
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Embeds the git version and description into the git executable thus
implementing the request in issue #5.
Acked-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
* tr/line-log:
git-log(1): remove --full-line-diff description
line-log: fix documentation formatting
log -L: improve comments in process_all_files()
log -L: store the path instead of a diff_filespec
log -L: test merge of parallel modify/rename
t4211: pass -M to 'git log -M -L...' test
log -L: fix overlapping input ranges
log -L: check range set invariants when we look it up
Speed up log -L... -M
log -L: :pattern:file syntax to find by funcname
Implement line-history search (git log -L)
Export rewrite_parents() for 'log -L'
Refactor parse_loc
Update the test coverage support that was left to bitrot for some
time.
* tr/coverage:
coverage: build coverage-untested-functions by default
coverage: set DEFAULT_TEST_TARGET to avoid using prove
coverage: do not delete .gcno files before building
coverage: split build target into compile and test
Newer MacOS X encourages the programs to compile and link with
their CommonCrypto, not with OpenSSL.
* da/darwin:
imap-send: eliminate HMAC deprecation warnings on Mac OS X
cache.h: eliminate SHA-1 deprecation warnings on Mac OS X
Makefile: add support for Apple CommonCrypto facility
Makefile: fix default regex settings on Darwin
Mac OS X does not like to write(2) more than INT_MAX number of
bytes.
* fc/macos-x-clipped-write:
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
This makes git use wildmatch by default for all fnmatch() calls. Users
who want to use system fnmatch (or compat fnmatch) need to set
NO_WILDMATCH flag.
wildmatch is a drop-in fnmatch replacement with more features. Using
wildmatch gives us a consistent behavior across platforms. The
tentative plan is make it default with an opt-out for about 2 cycles,
then remove NO_WILDMATCH and compat/fnmatch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When TEST_OUTPUT_DIRECTORY setting is used, it was handled somewhat
inconsistently between the test framework and t/Makefile, and logic
to summarize the results looked at a wrong place.
* jk/test-output:
t/Makefile: don't define TEST_RESULTS_DIRECTORY recursively
test output: respect $TEST_OUTPUT_DIRECTORY
t/Makefile: fix result handling with TEST_OUTPUT_DIRECTORY
Update reading and updating packed-refs file, correcting corner case
bugs.
* mh/packed-refs-various: (33 commits)
refs: handle the main ref_cache specially
refs: change do_for_each_*() functions to take ref_cache arguments
pack_one_ref(): do some cheap tests before a more expensive one
pack_one_ref(): use write_packed_entry() to do the writing
pack_one_ref(): use function peel_entry()
refs: inline function do_not_prune()
pack_refs(): change to use do_for_each_entry()
refs: use same lock_file object for both ref-packing functions
pack_one_ref(): rename "path" parameter to "refname"
pack-refs: merge code from pack-refs.{c,h} into refs.{c,h}
pack-refs: rename handle_one_ref() to pack_one_ref()
refs: extract a function write_packed_entry()
repack_without_ref(): write peeled refs in the rewritten file
t3211: demonstrate loss of peeled refs if a packed ref is deleted
refs: change how packed refs are deleted
search_ref_dir(): return an index rather than a pointer
repack_without_ref(): silence errors for dangling packed refs
t3210: test for spurious error messages for dangling packed refs
refs: change the internal reference-iteration API
refs: extract a function peel_entry()
...
So that we can specify which scripts we do not want to install (they are
for testing).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to list the first prerequisite. No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to list again the prerequisites. No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SCRIPT_PYTHON_GEN is '$(patsubst %.py,%,$(SCRIPT_PYTHON))', so replace
'$(patsubst %.py,%,$(SCRIPT_PYTHON))' with it
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of Mac OS X 10.7, Apple deprecated all OpenSSL functions due to
OpenSSL ABI instability, thus leading to build diagnostics such as:
warning: 'SHA1_Init' is deprecated
(declared at /usr/include/openssl/sha.h:121)
Silence the warnings by using Apple's CommonCrypto SHA-1 replacement
functions for SHA1_Init(), SHA1_Update(), and SHA1_Final().
COMMON_DIGEST_FOR_OPENSSL is defined to instruct
<CommonCrypto/CommonDigest.h> to provide compatibility macros
associating OpenSSL SHA-1 functions with their CommonCrypto
counterparts.
[es: reworded commit message]
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of Mac OS X 10.7, Apple deprecated all OpenSSL functions due to
OpenSSL ABI instability, thus leading to build warnings. As a
replacement, Apple encourages developers to migrate to its own (stable)
CommonCrypto facility.
Introduce boilerplate which controls whether Apple's CommonCrypto
facility is employed (enabled by default). Also add a
NO_APPLE_COMMON_CRYPTO build flag with which the user can opt out to
use OpenSSL instead.
[es: extracted CommonCrypto-related Makefile boilerplate into separate
introductory patch]
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a bug in the Darwin kernel, write(2) calls have a maximum size
of INT_MAX bytes.
Introduce a new compat function, clipped_write(), that only writes
at most INT_MAX bytes and returns the number of bytes written, as
a substitute for write(2), and allow platforms that need this to
enable it from the build mechanism with NEEDS_CLIPPED_WRITE.
Set it for Mac OS X by default. It may be necessary to include this
function on Windows, too.
Signed-off-by: Filipe Cabecinhas <filcab+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the 'coverage' target to build coverage-untested-functions by
default, so as to make it more discoverable.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user sets DEFAULT_TEST_TARGET=prove in his config.mak, that
carries over into the coverage tests. Which is really bad if he also
sets GIT_PROVE_OPTS=-j<..> as that completely breaks the coverage
runs.
Instead of attempting to mess with the GIT_PROVE_OPTS, just force the
test target to 'test' so that we run under make, like we intended all
along.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The coverage-compile target depends on coverage-clean, which is
supposed to remove the earlier build products that would get in the
way of the next coverage test run.
However, removing *.gcno is actively wrong. These are the files that
contain the compile-time coverage related data. They are only rebuilt
if the source is compiled. So if one ran 'make coverage' two times in
a row, the second run would remove *.gcno, but then fail to recreate
them because neither source files nor build flags have changed. (This
remained hidden for so long most likely because any other intervening
use of 'make' will change the build flags, causing a full rebuild.)
So we make an exception for *.gcno. The *.gcda are the coverage
results, written when the gcov-instrumented program is run. We still
remove those, so as to get a one-test-run view of the data; you could
probably argue the other way too.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Confusingly, the coverage-build target in fact builds with gcov
support _and runs tests_.
Split it into two targets that actually are named after what they do.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0070-fundamental.sh fails on Mac OS X 10.8:
$ uname -a
Darwin lustrous 12.2.0 Darwin Kernel Version 12.2.0:
Sat Aug 25 00:48:52 PDT 2012;
root:xnu-2050.18.24~1/RELEASE_X86_64 x86_64
$ ./t0070-fundamental.sh -v
fatal: regex bug confirmed: re-build git with NO_REGEX=1
Fix it by using Git's regex library.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 380a4d92 ("Update cygwin.c for new mingw-64 win32 api headers",
11-11-2012) solved an header include order problem on cygwin 1.7 when
using the new mingw-64 WIN32 API headers. The solution involved using
a new build variable (V15_MINGW_HEADERS) to conditionally compile the
cygwin.c source file to use an include order appropriate for the old
and new header files. (The build variable was later renamed in commit
9fca6cff to CYGWIN_V15_WIN32API).
The include order used for cygwin 1.7 includes the "win32.h" header
before "../git-compat-util.h". This order was problematic on cygwin
1.5, since it lead to the WIN32 symbol being defined along with the
inclusion of some WIN32 API headers (e.g. <winsock2.h>) which cause
compilation errors.
The header include order problem on cygwin 1.5 has since been fixed
(see commit "mingw: rename WIN32 cpp macro to GIT_WINDOWS_NATIVE"),
so we can now remove the conditional compilation along with the
associated CYGWIN_V15_WIN32API build variable.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-refs.c doesn't contain much code, and the code it does contain is
closely related to reference handling. Moreover, there is some
duplication between pack_refs() and repack_without_ref(). Therefore,
merge pack-refs.c into refs.c and pack-refs.h into refs.h.
The code duplication will be addressed in future commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most test results go in $TEST_OUTPUT_DIRECTORY, but the output files for
tests run with --tee or --valgrind just use bare "test-results".
Changes these so that they do respect $TEST_OUTPUT_DIRECTORY.
As a result of this, the valgrind/analyze.sh script may no longer
inspect the correct files so it is also updated to respect
$TEST_OUTPUT_DIRECTORY by adding it to GIT-BUILD-OPTIONS. This may be a
regression for people who have TEST_OUTPUT_DIRECTORY in their config.mak
but want to override it in the environment, but this change merely
brings it into line with GIT_TEST_OPTS which already cannot be
overridden if it is specified in config.mak.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like all the other shell scripts, replace the shebang line to
make sure it runs under the shell the user specified.
As this no longer depends on bashisms, t5801 does not have to say
bash must be available somewhere on the system.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues many "Using plain integer as NULL pointer" warnings
while checking nedmalloc.c (at least 98 such warnings before giving
up due to "too many warnings"). In addition, sparse issues some
"non-ANSI function declaration" type warnings for the symbols
'win32_getcurrentthreadid', 'malloc_stats' and 'malloc_footprint'.
In order to suppress the NULL pointer warnings, rather than replace
all uses of '0' as a null pointer representation with NULL, we add
-Wno-non-pointer-null to SPARSE_FLAGS while checking nedmalloc.c.
In order to suppress the "non-ANSI function declaration" warnings,
we simply include the missing 'empty parameter list' prototype (void)
in the function declarations.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the three variables safer to be exported to submakes by
ensuring that they are full paths so that they can be used as
installation location.
* jk/common-make-variables-export-safety:
Makefile: make mandir, htmldir and infodir absolute
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use the same style of -L n,m argument for 'git log -L' as
for git-blame. Refactor the argument parsing of the range arguments
from builtin/blame.c to the (new) file that will hold the 'git log -L'
logic.
To accommodate different data structures in blame and log -L, the file
contents are abstracted away; parse_range_arg takes a callback that it
uses to get the contents of a line of the (notional) file.
The new test is for a case that made me pause during debugging: the
'blame -L with invalid end' test was the only one that noticed an
outright failure to parse the end *at all*. So make a more explicit
test for that.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rev-parse: clarify documentation of $name@{upstream} syntax
sha1_name: pass object name length to diagnose_invalid_sha1_path()
Makefile: keep LIB_H entries together and sorted
As a follow-up to 60d24dd25 (Makefile: fold XDIFF_H and VCSSVN_H into
LIB_H), let the unconditional additions to LIB_H form a single sorted
list. Also drop the duplicate entry for xdiff/xdiff.h, which was easy
to spot after sorting.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 78457bc0cc.
commit 28c5d9e ("vcs-svn: drop string_pool") previously removed
the only call-site for strtok_r. So let's get rid of the compat
implementation as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the use of the variables with the same names in autotools,
reducing the potential for user surprise.
Using relative paths in these variables also causes issues if they are
exported from the Makefile, as discussed in commit c09d62f (Makefile: do
not export mandir/htmldir/infodir, 2013-02-12).
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A change made on v1.8.1.x maintenance track had a nasty regression
to break the build when autoconf is used.
* jn/less-reconfigure:
Makefile: avoid infinite loop on configure.ac change
If you are using autoconf and change the configure.ac, the
Makefile will notice that config.status is older than
configure.ac, and will attempt to rebuild and re-run the
configure script to pick up your changes. The first step in
doing so is to run "make configure". Unfortunately, this
tries to include config.mak.autogen, which depends on
config.status, which depends on configure.ac; so we must
rebuild config.status. Which leads to us running "make
configure", and so on.
It's easy to demonstrate with:
make configure
./configure
touch configure.ac
make
We can break this cycle by not re-invoking make to build
"configure", and instead just putting its rules inline into
our config.status rebuild procedure. We can avoid a copy by
factoring the rules into a make variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make COMPUTE_HEADER_DEPENDENCIES=no clean" would try to run "rm
-rf $(dep_dirs)" with an empty dep_dir, but some implementations of
"rm -rf" barf on an empty argument list.
* mk/make-rm-depdirs-could-be-empty:
Makefile: don't run "rm" without any files
When COMPUTE_HEADER_DEPENDENCIES is set to "auto" and the compiler
does not support it, $(dep_dirs) becomes empty. "make clean" runs
"rm -rf $(dep_dirs)", which can fail in such a case.
Signed-off-by: Matt Kraai <matt.kraai@amo.abbott.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expat 1.1 and 1.2 provide xmlparse.h instead of expat.h. Include the
former on systems that define the EXPAT_NEEDS_XMLPARSE_H variable and
define that variable on QNX systems, which ship with expat 1.1.
Signed-off-by: Matt Kraai <matt.kraai@amo.abbott.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's Makefile provides a few nice features for script build and
installation (substitute the first line with the right path, hardcode the
path to Git library, ...).
The Makefile already knows how to process files outside the toplevel
directory with e.g.
make SCRIPT_PERL=path/to/file.perl path/to/file
but we can make it simpler for callers by exposing build, install and
clean rules as .PHONY targets.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Buggy versions of ccache broke the auto-generation of dependencies.
* jn/auto-depend-workaround-buggy-ccache:
Makefile: explicitly set target name for autogenerated dependencies
An age-old workaround to prevent buggy versions of ccache from
breaking the auto-generation of dependencies, which unfortunately
is still relevant because some people use ancient distros.
* jn/auto-depend-workaround-buggy-ccache:
Makefile: explicitly set target name for autogenerated dependencies
* jc/merge-blobs:
Makefile: Replace merge-file.h with merge-blobs.h in LIB_H
merge-tree: fix d/f conflicts
merge-tree: add comments to clarify what these functions are doing
merge-tree: lose unused "resolve_directories"
merge-tree: lose unused "flags" from merge_list
Which merge_file() function do you mean?
"gcc -MF depfile -MMD -MP -c -o path/to/file.o" produces a makefile
snippet named "depfile" describing what files are needed to build the
target given by "-o". When ccache versions before v3.0pre0~187 (Fix
handling of the -MD and -MDD options, 2009-11-01) run, they execute
gcc -MF depfile -MMD -MP -E
instead to get the final content for hashing. Notice that the "-c -o"
combination is replaced by "-E". The result is a target name without
a leading path.
Thus when building git with such versions of ccache with
COMPUTE_HEADER_DEPENDENCIES enabled, the generated makefile snippets
define dependencies for the wrong target:
$ make builtin/add.o
GIT_VERSION = 1.7.8.rc3
* new build flags or prefix
CC builtin/add.o
$ head -1 builtin/.depend/add.o.d
add.o: builtin/add.c cache.h git-compat-util.h compat/bswap.h strbuf.h \
After a change in a header file, object files in a subdirectory are
not automatically rebuilt by "make":
$ touch cache.h
$ make builtin/add.o
$
Luckily we can prevent trouble by explicitly supplying the name of the
target to ccache and gcc, using the -MQ option. Do so.
Reported-and-tested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reported-by: : 허종만 <jongman.heo@samsung.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace our use of fnmatch(3) with a more feature-rich wildmatch.
A handful patches at the bottom have been moved to nd/wildmatch to
graduate as part of that branch, before this series solidifies.
We may want to mark USE_WILDMATCH as an experimental curiosity a
bit more clearly (i.e. should not be enabled in production
environment, because it will make the behaviour between builds
unpredictable).
* nd/retire-fnmatch:
Makefile: add USE_WILDMATCH to use wildmatch as fnmatch
wildmatch: advance faster in <asterisk> + <literal> patterns
wildmatch: make a special case for "*/" with FNM_PATHNAME
test-wildmatch: add "perf" command to compare wildmatch and fnmatch
wildmatch: support "no FNM_PATHNAME" mode
wildmatch: make dowild() take arbitrary flags
wildmatch: rename constants and update prototype
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
Commit fa2364ec ("Which merge_file() function do you mean?", 06-12-2012)
renamed the files merge-file.[ch] to merge-blobs.[ch], but forgot to
rename the header file in the definition of the LIB_H macro.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the disused merge-tree proof-of-concept code.
* jc/merge-blobs:
merge-tree: fix d/f conflicts
merge-tree: add comments to clarify what these functions are doing
merge-tree: lose unused "resolve_directories"
merge-tree: lose unused "flags" from merge_list
Which merge_file() function do you mean?
When autoconf is used, any build on a different commit always ran
"config.status --recheck" even when unnecessary.
* jn/less-reconfigure:
build: do not automatically reconfigure unless configure.ac changed
When make is run, the python scripts are created from *.py files that
are changed to use the python given by PYTHON_PATH. And PYTHON_PATH
is set by default to /usr/bin/python on Linux.
However, next time make is run with a different value in PYTHON_PATH,
we failed to regenerate these scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the bits to set fallback default based on the platform from
the main Makefile to a separate file, so that it can be included in
Makefiles in subdirectories.
* jk/config-uname:
Makefile: hoist uname autodetection to config.mak.uname
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
When autoconf is used, any build on a different commit always ran
"config.status --recheck" even when unnecessary.
* jn/less-reconfigure:
build: do not automatically reconfigure unless configure.ac changed
Remove leftover bits from an earlier change to move gitk in its own
subdirectory. Reimplementing the dependency tracking rules needs
to be done in gitk history separately.
* cc/no-gitk-build-dependency:
Makefile: replace "echo 1>..." with "echo >..."
Makefile: detect when PYTHON_PATH changes
Makefile: remove tracking of TCLTK_PATH
Extract the following functions from builtin/add.c to pathspec.c, in
preparation for reuse by a new git check-ignore command:
- fill_pathspec_matches()
- find_used_pathspec()
The functions being extracted are not changed in any way, except
removal of the 'static' qualifier.
Also add comments documenting these newly public functions,
including clarifications that they operate on the index.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no documented, reliable, and future-proof method to
determine the installed w32api version on Cygwin. There are many
things that can be done that will work frequently, except when they
won't.
The only sane thing is to follow the guidance of the Cygwin
developers: the only supported configuration is that which the
current setup.exe produces, and in the case of problems, if the
installation is not up to date then updating is the first required
action.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various updates to fast-export used in the context of the remote
helper interface.
* fc/fast-export-fixes:
fast-export: make sure updated refs get updated
fast-export: don't handle uninteresting refs
fast-export: fix comparison in tests
fast-export: trivial cleanup
remote-testgit: implement the "done" feature manually
remote-testgit: report success after an import
remote-testgit: exercise more features
remote-testgit: cleanup tests
remote-testgit: remove irrelevant test
remote-testgit: remove non-local functionality
Add new simplified git-remote-testgit
Rename git-remote-testgit to git-remote-testpy
remote-helpers: fix failure message
remote-testgit: fix direction of marks
fast-export: avoid importing blob marks
Our Makefile first sets up some sane per-platform defaults
by looking at "uname", then modifies that according to the
results of autoconf (if any), then modifies that according
to the user's wishes in config.mak.
For sub-Makefiles like Documentation/Makefile, the latter
two are available, but the uname defaults are available only
to the main Makefile. This hasn't been a problem so far,
because the sub-Makefiles do not rely on any of those
automatic settings to do their work.
This patch puts the uname magic into its own file so it can
be reused in other Makefiles, opening up the possibility of
new knobs.
Note that we leave one reference to uname in the top-level
Makefile: if we are on Darwin, we must check the NO_FINK and
NO_DARWIN_PORTS settings. But because we are combining uname
settings with user-options, we must do so after all of the
config is loaded. This is acceptable, as the resulting
conditionals are about setting variables specific to the
top-level Makefile (and if that ever changes, we can hoist
them into a separate post-config include, too).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few more knobs for new platform ports can tweak.
* dm/port:
git-compat-util.h: do not #include <sys/param.h> by default
Generalize the inclusion of strings.h
Detect when the passwd struct is missing pw_gecos
Support builds when sys/param.h is missing
Starting with v1.7.12-rc0~4^2 (build: reconfigure automatically if
configure.ac changes, 2012-07-19), "config.status --recheck" is
automatically run every time the "configure" script changes. In
particular, that means the configuration procedure repeats whenever
the version number changes (since the configure script changes to
support "./configure --version" and "./configure --help"), making
bisecting painfully slow.
The intent was to make the reconfiguration process only trigger for
changes to configure.ac's logic. Tweak the Makefile rule to match
that intent by depending on configure.ac instead of configure.
Reported-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to NO_FNMATCH but it uses wildmatch instead of
compat/fnmatch. This is an intermediate step to let wildmatch be used
as fnmatch replacement for wider audience before it replaces fnmatch
completely and compat/fnmatch is removed.
fnmatch in test-wildmatch is not impacted by this and is the only
place that NO_FNMATCH or NO_FNMATCH_CASEFOLD remain active when
USE_WILDMATCH is set.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we allowed platforms that lack <sys/param.h> not to include
the header file from git-compat-util.h; we have included this header
file since the early days back when we used MAXPATHLEN (which we no
longer use) and also depended on it slurping ULONG_MAX (which we get
by including stdint.h or inttypes.h these days).
It turns out that we can compile our modern codebase just file
without including it on many platforms (so far, Fedora, Debian,
Ubuntu, MinGW, Mac OS X, Cygwin, HP-Nonstop, QNX and z/OS are
reported to be OK).
Let's stop including it by default, and on platforms that need it to
be included, leave "make NEEDS_SYS_PARAM_H=YesPlease" as an escape
hatch and ask them to report to us, so that we can find out about
the real dependency and fix it in a more platform agnostic way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When make is run, the python scripts are created from *.py files that
are changed to use the python given by PYTHON_PATH. And PYTHON_PATH
is set by default to /usr/bin/python on Linux.
This is nice except when you run make another time setting a
different PYTHON_PATH, because, as the python scripts have already
been created, make finds nothing to do.
The goal of this patch is to detect when the PYTHON_PATH changes and
to create the python scripts again when this happens. To do that we
use the same trick that is done to track other variables like prefix,
flags, tcl/tk path and shell path. We update a GIT-PYTHON-VARS file
with the PYTHON_PATH and check if it changed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like we are tracking the value of TCLTK_PATH in the main
Makefile for no good reason.
This patch removes the useless code used to do this tracking.
Maybe this code should have been moved to gitk-git/Makefile by
62ba514 (Move gitk to its own subdirectory, 2007-11-17).
A patch to do that has just been sent to Paul Mackerras, the gitk
maintainer.
While at it, this patch removes /gitk-git/gitk-wish from
.gitignore as it should be in /gitk-git/.gitignore and the patch
sent to Paul put it there.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The header strings.h was formerly only included for HP NonStop (aka
Tandem) to define strcasecmp, but another platform requiring this
inclusion has been found. The build system will now include the
file based on its presence determined by configure.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NO_GECOS_IN_PWENT was documented with other Makefile variables but was only
enforced by manually defining it to the C preprocessor. This adds support
for detecting the condition with configure and defining the make variable.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An option is added to the Makefile to skip the inclusion of sys/param.h.
The only known platform with this condition thus far is the z/OS UNIX System
Services environment.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently use a single space before and after the "=" (or ":=", "+=",
etc.) in assignments to make macros. Granted, this was not a big deal,
but I did find the needless inconsistency quite distracting.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different static functions and one global function,
all of them called "merge_file()", with different signatures and
purposes. Rename them all to reduce confusion in "git grep" output:
* Rename the static one in merge-index to "merge_one_path(const char
*path)" as that function is about asking an external command to
resolve conflicts in one path.
* Rename the global one in merge-file.c that is only used by
merge-tree to "merge_blobs()", as the function takes three blobs and
returns the merged result only in-core, without doing anything to
the filesystem.
* Rename the one in merge-recursive to "merge_one_file()", just to be
fair.
Also rename merge-file.[ch] to merge-blobs.[ch].
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script is not really exercising the remote-helper functionality,
but more the python framework for remote helpers that live in
git_remote_helpers.
It's also not a good example of how to write remote-helpers, unless you
are planning to use python, and even then you might not want to use this
framework.
So let's use a more appropriate name: git-remote-testpy.
A patch that replaces git-remote-testgit with a simpler version is on
the way.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You will get
$ make distclean 2>&1 | grep curl
/bin/sh: curl-config: not found
/bin/sh: curl-config: not found
/bin/sh: curl-config: not found
/bin/sh: curl-config: not found
/bin/sh: curl-config: not found
$
if you don't have a curl development package installed.
The intent is not to alarm the user, but just to test if there is
a new enough curl installed. However, if you look at search engine
suggested completions, the above "error" messages are confusing
people into thinking curl is a hard requirement.
Redirect this error output to /dev/null as it is not necessary to be
shown to the end users.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git compile on cygwin with newer header files.
* ml/cygwin-mingw-headers:
USE CGYWIN_V15_WIN32API as macro to select api for cygwin
Update cygwin.c for new mingw-64 win32 api headers
The previous macro was confusing to some, and did not include "cygwin" in
its name. The updated name more clearly expresses a choice of the
win32api implementation that shipped with version 1.5 of cygwin.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cygwin project recently switched to a new implementation of the
windows api, now using header files from the mingw-64 project. These
new header files are incompatible with the way cygwin.c included the
old headers: cygwin.c can be compiled using the new or the older (mingw)
headers, but different files must be included in different order for each
to work. The new headers are in use only for the current release series
(based upon the v1.7.x dll version). The previous release series using
the v1.5 dll is kept available but unmaintained for use on older versions
of Windows. So, patch cygwin.c to use the new include ordering only if
the dll version is 1.7 or higher.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This fixes the vast majority of test failures on HP NonStop.
Some test don't work with /bin/diff, some fail with /bin/tar,
so let's put /usr/local/bin in PATH first.
Some tests fail with /bin/sh (link to /bin/ksh) so use bash instead
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Jeff King <peff@peff.net>
fetch_pack() is used by transport.c, part of libgit.a while it stays
in builtin/fetch-pack.c. Move it to fetch-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
send_pack() is used by transport.c, part of libgit.a while it stays in
builtin/send-pack.c. Move it to send-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
These functions are called in sequencer.c, which is part of
libgit.a. This makes libgit.a potentially require builtin/merge.c for
external git commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
A GSoC project.
* fa/remote-svn:
Add a test script for remote-svn
remote-svn: add marks-file regeneration
Add a svnrdump-simulator replaying a dump file for testing
remote-svn: add incremental import
remote-svn: Activate import/export-marks for fast-import
Create a note for every imported commit containing svn metadata
vcs-svn: add fast_export_note to create notes
Allow reading svn dumps from files via file:// urls
remote-svn, vcs-svn: Enable fetching to private refs
When debug==1, start fast-import with "--stats" instead of "--quiet"
Add documentation for the 'bidi-import' capability of remote-helpers
Connect fast-import to the remote-helper via pipe, adding 'bidi-import' capability
Add argv_array_detach and argv_array_free_detached
Add svndump_init_fd to allow reading dumps from arbitrary FDs
Add git-remote-testsvn to Makefile
Implement a remote helper for svn in C
The malloc checks can be disabled using the TEST_NO_MALLOC_CHECK
variable, either from the environment or command line of an
'make test' invocation. In order to allow the malloc checks to be
disabled from the 'config.mak' file, we add TEST_NO_MALLOC_CHECK
to the environment using an export directive.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The link-rule is a copy of the standard git$X rule but adds VCSSVN_LIB.
Add executable to .gitignore.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/poll-emu:
make poll() work on platforms that can't recv() on a non-socket
poll() exits too early with EFAULT if 1st arg is NULL
fix some win32 specific dependencies in poll.c
make poll available for other platforms lacking it
Includes the addition of some new defines and their description for others to use.
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/string-list:
api-string-list.txt: initialize the string_list the easy way
string_list: add a function string_list_longest_prefix()
string_list: add a new function, string_list_remove_duplicates()
string_list: add a new function, filter_string_list()
string_list: add two new functions for splitting strings
string_list: add function string_list_append_nodup()
move poll.[ch] out of compat/win32/ into compat/poll/ and adjust
Makefile with the changed paths. Adding comments to Makefile about
how/when to enable it and add logic for this
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touches to recently added wrapper for mkdir() that do not
want to see trailing slashes.
* js/compat-mkdir:
Document MKDIR_WO_TRAILING_SLASH in Makefile
Add two new functions, string_list_split() and
string_list_split_in_place(). These split a string into a string_list
on a separator character. The first makes copies of the substrings
(leaving the input string untouched) and the second splits the
original string in place, overwriting the separator characters with
NULs and referring to the original string's memory.
These functions are similar to the strbuf_split_*() functions except
that they work with the more powerful string_list interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git ships with a fall-back regexp implementation for platforms with
buggy regexp library; give people a tool to see if they should be
using it on their platform.
* rj/test-regex:
test-regex: Add a test to check for a bug in the regex routines
* jk/check-docs-update:
check-docs: get documented command list from Makefile
check-docs: drop git-help special-case
check-docs: list git-gui as a command
check-docs: factor out command-list
command-list: mention git-credential-* helpers
command-list: add git-sh-i18n
check-docs: update non-command documentation list
check-docs: mention gitweb specially
The current code uses setitimer() only for reducing perceived
latency. On platforms that lack setitimer() (e.g. HP NonStop),
allow builders to say "make NO_SETITIMER=YesPlease" to use a no-op
substitute, as doing so would not affect correctness.
HP NonStop does provide struct itimerval, but other platforms may
not, so this is taken care of in this commit too, by setting
NO_STRUCT_ITIMERVAL.
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify "make check-docs" implementation and update its coverage.
* jk/check-docs-update:
check-docs: get documented command list from Makefile
check-docs: drop git-help special-case
check-docs: list git-gui as a command
check-docs: factor out command-list
command-list: mention git-credential-* helpers
command-list: add git-sh-i18n
check-docs: update non-command documentation list
check-docs: mention gitweb specially
The recent update to terminal I/O interface to get passwords &c
interactively didn't quite work on Solaris.
* bw/maint-1.7.9-solaris-getpass:
Enable HAVE_DEV_TTY for Solaris
terminal: seek when switching between reading and writing
The current code tries to get a list of documented commands
by doing "ls Documentation/git*txt" and culling a bunch of
special cases from the result. Looking for "git-*.txt" would
be more accurate, but would miss a few commands like
"gitweb" and "gitk".
Fortunately, Documentation/Makefile already knows what this
list is, so we can just ask it. Annoyingly, we still have to
post-process its output a little, since make will print
extra cruft like "GIT-VERSION-FILE is up to date" to stdout.
Now that our list is accurate, we can remove all of the ugly
special-cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check-docs target special-cases git-help to avoid
mentioning it as "documented but removed". This dates back
to the early implementation of git-help, when its code was
simply included inside git.c.
These days it is a full-fledged builtin (in builtin/help.c)
and does not need special-casing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui is already documented and mentioned in command-list,
but adding it to the Makefile makes sure it is so. We also
add its alias git-citool (which is also documented).
As a result, we can drop them from the special case
statement that avoids them being listed as "documented but
does not exist".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check-docs command list is composed from several
Makefile variables plus some special cases. Let's make the
meaning of the list more obvious and avoid repeating
ourselves by factoring it out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check-docs target looks at Documentation/git*txt and
complains if any entry does not have a matching command.
Therefore we need to explicitly ignore any entries which are
not meant to describe a command (like gitattributes.txt).
This list has grown stale over time, so let's bring it up to
date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like gitk, gitweb is not listed in the usual Makefile
variables and must be fed to check-docs specially. Otherwise
check-docs thinks it is documented but removed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git_terminal_prompt can cleanly interact with /dev/tty on
Solaris, enable HAVE_DEV_TTY so that this code path is used for
credential reading instead of relying on the crippled getpass().
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/block-sha1:
Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads
block-sha1: put expanded macro parameters in parentheses
block-sha1: avoid pointer conversion that violates alignment constraints
The Makefile already offers the variable $(FIND) and uses it except in one
place. Fix it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add i18n support for scripted Porcelains, and mark strings in
merge(-recursive), am, and rebase for i18n.
* jx/i18n-1.7.11:
i18n: merge-recursive: mark strings for translation
Remove dead code which contains bad gettext block
i18n: am: mark more strings for translation
rebase: remove obsolete and unused LONG_USAGE which breaks xgettext
i18n: Rewrite gettext messages start with dash
i18n: rebase: mark messages for translation
i18n: New keywords for xgettext extraction from sh
While Makefile.PL now finds .pm files on its own, it does not
detect new files after it generates perl/perl.mak.
[ew: commit message, minor tweaks]
ref: http://mid.gmane.org/7vlii51xz4.fsf@alter.siamese.dyndns.org
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since we have additional shell wrappers (gettextln and eval_gettextln)
for gettext, we need to take into account these wrappers when running
'make pot' to extract messages from shell scripts.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to load a word one-byte-at-a-time was optimized into a
word-wide load instruction even when the pointer was not aligned,
which caused issues on architectures that do not like unaligned
access.
* jn/block-sha1:
Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads
block-sha1: put expanded macro parameters in parentheses
block-sha1: avoid pointer conversion that violates alignment constraints
block-sha1/ is fast on most known platforms. Clarify the Makefile to
be less misleading about that.
Early versions of block-sha1/ explicitly relied on fast htonl() and
fast 32-bit loads with arbitrary alignment. Now it uses those on some
arches but the default behavior is byte-at-a-time access for the sake
of arches like ARM, Alpha, and their kin and it is still pretty fast
on these arches (fast enough to supersede the mozilla SHA1
implementation and the hand-written ARM assembler implementation that
were bundled before).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I invoke "make block-sha1/sha1.s", 'make' runs $(CC) -S without
specifying where it should put its output and the output ends up in
./sha1.s. Confusing.
Add an -o option to the .s rule to fix this. We were already doing
that for most compiler invocations but had forgotten it for the
assembler listings.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a reduced but still useful sibling of the Automake's
"automatic Makefile rebuild" feature. It's important to note that
we take care to enable the new rules only if the tree that has already
be configured with './configure', so that users relying on manual
configuration won't be negatively impacted.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Those filed hold variables, settings and information set by the
configuration process run by './configure'; in Autotools-based
build system that kind of stuff should only be removed by
"make distclean". Having it removed by "make clean" is not only
inconsistent, but causes real confusion for that part of the Git
audience that is used to the Autotools semantics; for example,
an autotools old-timer that has run:
./configure --prefix /opt/git
in the past, without running "make distclean" afterwards, would
expect a "make install" issued after a "make clean" to rebuild and
install git in '/opt/git'; but with the current behaviour, the
"make clean" invocation removes (among the other things) the file
'config.mak.autogen', so that the "make install" falls back to the
default prefix of '$HOME', thus installing git in the user's home
directory -- definitely unexpected.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tightens dependency rules to avoid unnecessary recompilation, and
cleans up our Makefile in general.
* jn/makefile-cleanup:
Makefile: document ground rules for target-specific dependencies
Makefile: move GIT-VERSION-FILE dependencies closer to use
Makefile: build instaweb similar to other scripts
Makefile: update scripts when build-time parameters change
Makefile: do not replace @@GIT_VERSION@@ in shell scripts
Makefile: split prefix flags from GIT-CFLAGS
Makefile: be silent when only GIT_USER_AGENT changes
Makefile: split GIT_USER_AGENT from GIT-CFLAGS
Makefile: do not replace @@GIT_USER_AGENT@@ in scripts
Makefile: apply dependencies consistently to sparse/asm targets
Makefile: do not have git.o depend on common-cmds.h
Makefile: fold XDIFF_H and VCSSVN_H into LIB_H
Makefile: fold MISC_H into LIB_H
Makefile: sort LIB_H list
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
Expose the credential API to scripted Porcelain writers.
* mm/credential-plumbing:
git-remote-mediawiki: update comments to reflect credential support
git-remote-mediawiki: add credential support
git credential fill: output the whole 'struct credential'
add 'git credential' plumbing command
On Cygwin, the platform pread(3) is not thread safe, just like our
own compat/ emulation, and cannot be used in the index-pack program.
* rj/platform-pread-may-be-thread-unsafe:
index-pack: Disable threading on cygwin
When a source file makes use of a makefile variable, there should be a
corresponding dependency on a file that changes when that variable
changes to ensure the build output is not left stale when the variable
changes.
Document this, even though we are not following the rule perfectly
yet. Based on an explanation from Jeff King.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a list of all of the targets which depend on
GIT-VERSION-FILE, but it can be quite far from the actual
point where the targets actually use $(GIT_VERSION). This
can make it hard to verify that each use of $(GIT_VERSION)
has a matching dependency.
This patch moves the dependency closer to the actual build
instructions, which makes verification easier. This also
fixes the generation of "configure", which did not properly
mark the dependency.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instaweb would not properly rebuild if the build-time
parameters changed. Fix this by depending on the
GIT-SCRIPT-DEFINES meta-file and using $(cmd_munge_script)
like all the other shell scripts. This requires adding a few
new parametres to cmd_munge_script, but that doesn't hurt
existing scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, running:
make SHELL_PATH=/bin/bash &&
make SHELL_PATH=/bin/sh
will not rebuild any shell scripts in the second command,
leading to incorrect results when building from an unclean
working directory.
This patch introduces a new dependency meta-file to notice
the change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No shell script actually uses the replacement (it is used in
some perl scripts, but cmd_munge_script only handles shell
scripts). We can also therefore drop the dependency on
GIT-VERSION-FILE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the build targets do not care about the setting of
$prefix (or its derivative variables), but will be rebuilt
if the prefix changes. For most setups this doesn't matter
(they set prefix once and never change it), but for a setup
which puts each branch or version in its own prefix, this
unnecessarily causes a full rebuild whenever the branc is
changed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid noise during builds, unlike the GIT-CFLAGS rule which prints
"* new build flags or prefix" so the operator knows why all files are
being rebuilt when it changes, GIT-USER-AGENT generation is silent.
If this code breaks and a target depending on GIT-USER-AGENT ends up
being rebuilt when it shouldn't be, the full dependency chain can be
retrieved with "make --debug=b".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default user-agent depends on the GIT_VERSION, which
means that anytime you switch versions, it causes a full
rebuild. Instead, let's split it out into its own file and
restrict the dependency to version.o.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No scripts actually care about this replacement. This was
erroneously added by 42dcbb7 (version: add git_user_agent function,
2012-06-02).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a C file "foo.c" depends on a generated header file, we
note the dependency for the "foo.o" target. However, we
should also note it for other targets that are built from
foo.c, like "foo.sp" and "foo.s". These tend to be missed
because the latter two are not part of the default build,
and are typically built after a regular build which will
generate the header. Let's be consistent about including
them in dependencies.
This also makes us more consistent with nearby lines which
tack on EXTRA_CPPFLAGS when building certain files. These
flags may sometimes require extra dependencies to be added
(e.g., like GIT-VERSION-FILE; this is not the case for any
of the updated lines in this patch, but it is establishing a
style that will be used in later patches). Technically the
".sp" and ".s" targets do not care about these dependencies,
because they are force-built (".sp" because it is a phony
target, and ".s" because we explicitly force a rebuild).
Since the blocks in question are about communicating "things
built from foo.c depend on these flags", it frees the reader
from having to know or care more about how those targets are
implemented, and why it is OK for only "foo.o" to depend on
GIT-VERSION-FILE while "foo.sp" and "foo.s" both are
impacted by $(GIT_VERSION). And it helps future-proof us if
those force-build details should ever change.
This patch explicitly does not update the static header
dependencies used when COMPUTED_HEADER_DEPENDENCIES is off.
They are similar to the GIT-VERSION-FILE case above, in that
technically "foo.s" would depend on its included headers,
but it is irrelevant because we force-build it anyway. So it
would be tempting to update them in the same way (for
readability and future-proofing). However, those rules are
meant as a fallback to the computed header dependencies,
which do not handle ".s" and ".sp" at all (and are a much
harder problem to solve, as gcc is the one generating those
dependency lists).
So let's leave that harder problem until (and if) somebody
wants to change the ".sp" and ".s" rules, and keep the
static header dependencies consistent with the computed
ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This dependency has been stale since 70827b1 (Split up
builtin commands into separate files from git.c, 2006-04-21).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like MISC_H (see previous commit), there is no reason to track
xdiff and vcs-svn headers separately from the rest of the headers.
The only purpose of these variables is to keep track of recompilation
dependencies.
As a pleasant side effect, folding these into LIB_H lets us stop
tracking GIT_OBJS and VCSSVN_TEST_OBJS separately from the list of all
OBJECTS.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Cygwin implementation of pread() is not thread-safe since, just
like the emulation provided by compat/pread.c, it uses a sequence of
seek-read-seek calls. In order to avoid failues due to thread-safety
issues, commit b038a61 disables threading when NO_PREAD is defined.
(ie when using the emulation code in compat/pread.c).
We introduce a new build variable, NO_THREAD_SAFE_PREAD, which allows
use to disable the threaded index-pack code on cygwin, in addition to
the above NO_PREAD case.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The credential API is in C, and not available to scripting languages.
Expose the functionalities of the API by wrapping them into a new
plumbing command "git credentials".
In other words, replace the internal "test-credential" by an official Git
command.
Most documentation writen by: Jeff King <peff@peff.net>
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr>
Signed-off-by: Kim Thuat Nguyen <Kim-Thuat.Nguyen@ensimag.imag.fr>
Signed-off-by: Javier Roucher Iglesias <Javier.Roucher-Iglesias@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We no longer use AsciiDoc7 syntax in our documentation and favor a
more modern style.
* jk/no-more-asciidoc7:
docs: drop antique comment from Makefile
docs: drop asciidoc7compatible flag
We used to always default to "man" format even on platforms where
"man" viewer is not widely available.
* vr/help-per-platform:
help: use HTML as the default help format on Windows
We keep a list of most of the header files in LIB_H, but
some are split out into MISC_H. The original point
of LIB_H was that it would force recompilation of C files
when any of the library headers changed. It was
over-encompassing, since not all C files included all of the
library headers; this made it simple to maintain, but meant
that we sometimes recompiled when it was not necessary.
Over time, some new headers were omitted from LIB_H, and
rules were added to the Makefile for a few specific targets
to explicitly depend on them. This avoided some unnecessary
recompilation at the cost of having to maintain the
dependency list of those targets manually (e.g., d349a03).
Later, we needed a complete list of headers from which we
should extract strings to localized. Thus 1b8b2e4 introduced
MISC_H to mention all header files not included in LIB_H,
and the concatenation of the two lists is fed to xgettext.
Headers mentioned as dependencies must also be manually
added to MISC_H to receive the benefits of localization.
Having to update multiple locations manually is a pain and
has led to errors. For example, see "git log -Swt-status.h
Makefile" for some back-and-forth between the two locations.
Or the fact that column.h was never added to MISC_H, and
therefore was not localized (which is fixed by this patch).
Moreover, the benefits of keeping these few headers out of
LIB_H is not that great, for two reasons:
1. The better way to do this is by auto-computing the
dependencies, which is more accurate and less work to
maintain. If your compiler supports it, we turn on
computed header dependencies by default these days. So
these manual dependencies are used only for people who
do not have gcc at all (which increases the chance of
them becoming stale, as many developers will never even
use them).
2. Even if you do not have gcc, the manual header
dependencies do not help all that much. They obviously
cannot help with an initial compilation (since their
purpose is to avoid unnecessary recompilation when a
header changes), which means they are only useful when
building a new version of git in the working tree that
held an existing build (e.g., after checkout or during a
bisection). But since a change of a header in LIB_H
will force recompilation, and given that the vast
majority of headers are in LIB_H, most version changes
will result in a full rebuild anyway.
Let's just fold MISC_H into LIB_H and get rid of these
manual rules. The worst case is some extra compilation, but
even that is unlikely to matter due to the reasons above.
The one exception is that we should keep common-cmds.h
separate. Because it is generated, the computed dependencies
do not handle it properly, and we must keep separate
individual dependencies on it. Let's therefore rename MISC_H
to GENERATED_H to make it more clear what should go in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was mostly sorted already, but put things like
"cache-tree.h" after "cache.h", even though "-" comes before
"." (at least in the C locale). This will make it easier to
keep the list sorted later by piping it through "sort".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git help $cmd' is run without a format option (e.g. -w), the
'man' format is always used. On some platforms, however, manual page
viewers are not often available.
Introduce DEFAULT_HELP_FORMAT make variable in order to allow the
default format configurable at compile time, and set it to HTML when
compiling on Windows (but not Cygwin).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This means we will respect the GIT_USER_AGENT build-time
configuration and run-time environment variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is basically a fancy way of saying "git/$GIT_VERSION",
except that it is overridable at build-time and through the
environment. Which means that people who don't want to
advertise their git version (for privacy or security
reasons) can tweak it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The global git_version_string currently lives in git.c, but
doesn't have anything to do with the git wrapper. Let's move
it into its own file, where it will be more appropriate to
build more version-related functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 20fc9bc (Set HTTP user agent to git/GIT_VERSION, 2006-04-04),
http.o started recording GIT_VERSION, but http.o wasn't added
to the list of files that depends on GIT-VERSION-FILE.
Fix this, so mofications to GIT-VERSION-FILE will result in an
updated user-agent string.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we made the switch to supporting asciidoc 8 in 4c7100a
(Documentation: adjust to AsciiDoc 8, 2007-06-14), we were
able to leave most of the documentation intact by defining
asciidoc7compatible.
Since commit 6cf378f (docs: stop using asciidoc no-inline-literal,
2012-04-26), we don't support versions of asciidoc older
than 8.4.1, which is when inline literals were introduced.
Therefore there is not much point in keeping our
documentation compatible with asciidoc 7.
So we are now free to drop the asciidoc7compatible flag and
update the documentation itself to assume asciidoc8.
Fortunately, doing the latter is very easy; we weren't using
any of the constructs impacted by asciidoc7compatible, so
there are no changes to make.
The reason is somewhat subtle. The asciidoc7compatible
affects only super/sub-scripts ("^" and "~") and index
terms. We don't use the latter at all. Nor we do we use the
former, but we did have to protect them from accidental
expansion in constructs like "rev^1". However, all of our
uses of "~" and "^" are either in code blocks (which are
rendered literally), or inside backticks. Prior to 6cf378f,
backticks were not inline literals, and needed proper
quoting. But post-6cf378f, we don't have to worry whether we
are using the old or new rules, as those characters are not
interpreted at all in either case.
I verified that the result of "make install-html
install-man" is identical before and after this patch on
asciidoc 8.6.7.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enables threading in index-pack to resolve base data in parallel.
By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1)
* nd/threaded-index-pack:
index-pack: disable threading if NO_PREAD is defined
index-pack: support multithreaded delta resolving
index-pack: restructure pack processing into three main functions
compat/win32/pthread.h: Add an pthread_key_delete() implementation
Your build platform may support hardlinks but you may prefer not to use
them, e.g. when installing to DESTDIR to make a tarball and untarring on
a filesystem that has poor support for hardlinks.
The Makefile in git-gui project may need to learn to honor the same
setting; it unconditionally creates git-citool by hardlinking git-gui.
* jc/install-no-hardlinks:
Makefile: NO_INSTALL_HARDLINKS
This puts delta resolving on each base on a separate thread, one base
cache per thread. Per-thread data is grouped in struct thread_local.
When running with nr_threads == 1, no pthreads calls are made. The
system essentially runs in non-thread mode.
An experiment on a Xeon 24 core machine with git.git shows that
performance does not increase proportional to the number of cores. So
by default, we use maximum 3 cores. Some numbers with --threads from 1
to 16:
1..4
real 0m8.003s 0m5.307s 0m4.321s 0m3.830s
user 0m7.720s 0m8.009s 0m8.133s 0m8.305s
sys 0m0.224s 0m0.372s 0m0.360s 0m0.360s
5..8
real 0m3.727s 0m3.604s 0m3.332s 0m3.369s
user 0m9.361s 0m9.817s 0m9.525s 0m9.769s
sys 0m0.584s 0m0.624s 0m0.540s 0m0.560s
9..12
real 0m3.036s 0m3.139s 0m3.177s 0m2.961s
user 0m8.977s 0m10.205s 0m9.737s 0m10.073s
sys 0m0.596s 0m0.680s 0m0.684s 0m0.680s
13..16
real 0m2.985s 0m2.894s 0m2.975s 0m2.971s
user 0m9.825s 0m10.573s 0m10.833s 0m11.361s
sys 0m0.788s 0m0.732s 0m0.904s 0m1.016s
On an Intel dual core and linux-2.6.git
1..4
real 2m37.789s 2m7.963s 2m0.920s 1m58.213s
user 2m28.415s 2m52.325s 2m50.176s 2m41.187s
sys 0m7.808s 0m11.181s 0m11.224s 0m10.731s
Thanks Ramsay Jones for troubleshooting and support on MinGW platform.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Your filesystem may support hardlinks, but you may choose not to use them
when installing git-foo builtins and favor symblic links or copies for
whatever reason.
The installation procedure of git-gui/ directory is not touched with this
patch and git-citool still ends up being a hardlink to git-gui, but it
needs to be addressed separately.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tend to keep long lists sorted (extensions are not taken into
account), which helps spot a name easily by eye. Rearrange a few
items so these lists remain sorted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
Use word-at-a-time comparison to find end of line or NUL (end of buffer),
borrowed from the linux-kernel discussion.
By Thomas Rast
* tr/xdiff-fast-hash:
xdiff: choose XDL_FAST_HASH code on sizeof(long) instead of __WORDSIZE
xdiff: load full words in the inner loop of xdl_hash_record
More message strings marked for i18n.
By Nguyễn Thái Ngọc Duy (10) and Jonathan Nieder (1)
* nd/i18n:
help: replace underlining "help -a" headers using hyphens with a blank line
i18n: bundle: mark strings for translation
i18n: index-pack: mark strings for translation
i18n: apply: update say_patch_name to give translators complete sentence
i18n: apply: mark strings for translation
i18n: remote: mark strings for translation
i18n: make warn_dangling_symref() automatically append \n
i18n: help: mark strings for translation
i18n: mark relative dates for translation
strbuf: convenience format functions with \n automatically appended
Makefile: feed all header files to xgettext
Trivially shrinks the on-disk size of the index file to save both I/O and
checksum overhead.
The topic should give a solid base to build on further updates, with the
code refactoring in its earlier parts, and the backward compatibility
mechanism in its later parts.
* jc/index-v4:
index-v4: document the entry format
unpack-trees: preserve the index file version of original
update-index: upgrade/downgrade on-disk index version
read-cache.c: write prefix-compressed names in the index
read-cache.c: read prefix-compressed names in index on-disk version v4
read-cache.c: move code to copy incore to ondisk cache to a helper function
read-cache.c: move code to copy ondisk to incore cache to a helper function
read-cache.c: report the header version we do not understand
read-cache.c: make create_from_disk() report number of bytes it consumed
read-cache.c: allow unaligned mapping of the index file
cache.h: hide on-disk index details
varint: make it available outside the context of pack
A column option string consists of many token separated by either
a space or a comma. A token belongs to one of three groups:
- enabling: always, never and auto
- layout mode: currently plain (which does not layout at all)
- other future tuning flags
git-column can be used to pipe output to from a command that wants
column layout, but not to mess with its own output code. Simpler output
code can be changed to use column layout code directly.
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also marks most common commands' synopsis for translation
so that "git help" gives a friendly listing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
Setting up a revision traversal with many starting points was inefficient
as these were placed in a date-order priority queue one-by-one.
By René Scharfe (3) and Junio C Hamano (1)
* rs/commit-list-sort-in-batch:
mergesort: rename it to llist_mergesort()
revision: insert unsorted, then sort in prepare_revision_walk()
commit: use mergesort() in commit_list_sort_by_date()
add mergesort() for linked lists
Make it easier for distros to document custom pager and editor they
used when building their binary releases in "git var" documentation.
By Jonathan Nieder
* jn/debian-customizes-default-editor:
var doc: advertise current DEFAULT_PAGER and DEFAULT_EDITOR settings
var doc: default editor and pager are configurable at build time
Translation markers may be present in header files too. Make sure we
don't miss any.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a generic bottom-up mergesort implementation for singly linked
lists. It was inspired by Simon Tatham's webpage on the topic[1], but
not so much by his implementation -- for no good reason, really, just a
case of NIH.
[1] http://www.chiark.greenend.org.uk/~sgtatham/algorithms/listsort.html
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the default pager and editor chosen at compile time in the
git-var(1) manpage so users curious about what command _this_ copy of
git will fall back to when EDITOR, VISUAL, and PAGER are unset can
find the answer quickly.
In builds leaving those settings uncustomized, this patch makes the
manpage continue to say "usually vi" and "usually less" so the
formatted documentation is usable for a wide audience including users
of custom builds that change those settings. If you would like your
copy of the docs to be less noncommittal, you will need to set
DEFAULT_PAGER=less and DEFAULT_EDITOR=vi explicitly.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redo the hashing loop in xdl_hash_record in a way that loads an entire
'long' at a time, using masking tricks to see when and where we found
the terminating '\n'.
I stole inspiration and code from the posts by Linus Torvalds around
https://lkml.org/lkml/2012/3/2/452https://lkml.org/lkml/2012/3/5/6
His method reads the buffers in sizeof(long) increments, and may thus
overrun it by at most sizeof(long)-1 bytes before it sees the final
newline (or hits the buffer length check). I considered padding out
all buffers by a suitable amount to "catch" the overrun, but
* this does not work for mmap()'d buffers: if you map 4096+8 bytes
from a 4096 byte file, accessing the last 8 bytes results in a
SIGBUS on my machine; and
* it would also be extremely ugly because it intrudes deep into the
unpacking machinery.
So I adapted it to not read beyond the buffer at all. Instead, it
reads the final partial word byte-by-byte and strings it together.
Then it can use the same logic as before to finish the hashing.
So far we enable this only on x86_64, where it provides nice speedup
for diff-related work:
Test origin/next tr/xdiff-fast-hash
-----------------------------------------------------------------------------
4000.1: log -3000 (baseline) 0.07(0.05+0.02) 0.08(0.06+0.02) +14.3%
4000.2: log --raw -3000 (tree-only) 0.37(0.33+0.04) 0.37(0.32+0.04) +0.0%
4000.3: log -p -3000 (Myers) 1.75(1.65+0.09) 1.60(1.49+0.10) -8.6%
4000.4: log -p -3000 --histogram 1.73(1.62+0.09) 1.58(1.49+0.08) -8.7%
4000.5: log -p -3000 --patience 2.11(2.00+0.10) 1.94(1.80+0.11) -8.1%
Perhaps other platforms could also benefit. However it does NOT work
on big-endian systems!
[jc: minimum style and compilation fixes]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the testing of the 1.7.10 rc series on Solaris for OpenCSW, it
was discovered that t7006-pager was failing due to finding a bad "sh"
in PATH after a call to execvp("sh", ...). This call was setup by
run_command.c:prepare_shell_cmd.
The PATH in use at the time saw /opt/csw/bin given precedence to
traditional Solaris paths such as /usr/bin and /usr/xpg4/bin. A
package named schilyutils (Joerg Schilling's utilities) was installed
on the build system and it delivered a modified version of the
traditional Solaris /usr/bin/sh as /opt/csw/bin/sh. This version of
sh suffers from many of the same problems as /usr/bin/sh.
The command-specific pager test failed due to the broken "sh" handling
^ as a pipe character. It tried to fork two processes when it
encountered "sed s/^/foo:/" as the pager command. This problem was
entirely dependent on the PATH of the user at runtime.
Possible fixes for this issue are:
1. Use the standard system() or popen() which both launch a POSIX
shell on Solaris as long as _POSIX_SOURCE is defined.
2. The git wrapper could prepend SANE_TOOL_PATH to PATH thus forcing
all unqualified commands run to use the known good tools on the
system.
3. The run_command.c:prepare_shell_command() could use the same
SHELL_PATH that is in the #! line of all all scripts and not rely
on PATH to find the sh to run.
Option 1 would preclude opening a bidirectional pipe to a filter
script and would also break git for Windows as cmd.exe is spawned from
system() (cf. v1.7.5-rc0~144^2, "alias: use run_command api to execute
aliases, 2011-01-07).
Option 2 is not friendly to users as it would negate their ability to
use tools of their choice in many cases. Alternately, injecting
SANE_TOOL_PATH such that it takes precedence over /bin and /usr/bin
(and anything with lower precedence than those paths) as
git-sh-setup.sh does would not solve the problem either as the user
environment could still allow a bad sh to be found. (Many OpenCSW
users will have /opt/csw/bin leading their PATH and some subset would
have schilyutils installed.)
Option 3 allows us to use a known good shell while still honouring the
users' PATH for the utilities being run. Thus, it solves the problem
while not negatively impacting either users or git's ability to run
external commands in convenient ways. Essentially, the shell is a
special case of tool that should not rely on SANE_TOOL_PATH and must
be called explicitly.
With this patch applied, any code path leading to
run_command.c:prepare_shell_cmd can count on using the same sane shell
that all shell scripts in the git suite use. Both the build system
and run_command.c will default this shell to /bin/sh unless
overridden.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document accumulated fixes since 1.7.9.2
Git 1.7.8.5
grep -P: Fix matching ^ and $
am: don't infloop for an empty input file
rebase -m: only call "notes copy" when rewritten exists and is non-empty
git-p4: remove bash-ism in t9800
git-p4: remove bash-ism in t9809
git-p4: fix submit regression with clientSpec and subdir clone
git-p4: set useClientSpec variable on initial clone
Makefile: add thread-utils.h to LIB_H
Conflicts:
RelNotes
t/t9809-git-p4-client-view.sh
Starting with commit v1.7.8-165-g0579f91, grep.h includes
thread-utils.h, so the latter has to be added to LIB_H.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a performance testing framework under t/perf/. It
tries to be as close to the test-lib.sh infrastructure as possible,
and thus should be easy to get used to for git developers.
The following points were considered for the implementation:
1. You usually want to compare arbitrary revisions/build trees against
each other. They may not have the performance test under
consideration, or even the perf-lib.sh infrastructure.
To cope with this, the 'run' script lets you specify arbitrary
build dirs and revisions. It even automatically builds the revisions
if it doesn't have them at hand yet.
2. Usually you would not want to run all tests. It would take too
long anyway. The 'run' script lets you specify which tests to run;
or you can also do it manually. There is a Makefile for
discoverability and 'make clean', but it is not meant for
real-world use.
3. Creating test repos from scratch in every test is extremely
time-consuming, and shipping or downloading such large/weird repos
is out of the question.
We leave this decision to the user. Two different sizes of test
repos can be configured, and the scripts just copy one or more of
those (using hardlinks for the object store). By default it tries
to use the build tree's git.git repository.
This is fairly fast and versatile. Using a copy instead of a clone
preserves many properties that the user may want to test for, such
as lots of loose objects, unpacked refs, etc.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file 'po/git.pot' is generated using the command 'make pot'
against git v1.7.9-209-gb6b3b (Update draft release notes to 1.7.10).
Since po/git.pot is tracked, remove the entry from .gitignore, and
not delete the file again when doing 'make distclean'.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Ever since the very first commit to git.git we've been setting CC to
"gcc". Presumably this is behavior that Linus copied from the Linux
Makefile.
However unlike Linux Git is written in ANSI C and supports a multitude
of compilers, including Clang, Sun Studio, xlc etc. On my Linux box
"cc" is a symlink to clang, and on a Solaris box I have access to "cc"
is Sun Studio's CC.
Both of these are perfectly capable of compiling Git, and it's
annoying to have to specify CC=cc on the command-line when compiling
Git when that's the default behavior of most other portable programs.
So change the default to "cc". Users who want to compile with GCC can
still add "CC=gcc" to the make(1) command-line, but those users who
don't have GCC as their "cc" will see expected behavior, and as a
bonus we'll be more likely to smoke out new compilation warnings from
our distributors since they'll me using a more varied set of compilers
by default.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems, the function locale_charset() may not be exported from
libiconv but is available from libcharset, and we need -lcharset when
linking.
Introduce a make variable CHARSET_LIB that can be set to -lcharsetlib
on such systems. Also autodetect this in the configure script by first
looking for the symbol in libiconv, and then libcharset.
Signed-off-by: Дилян Палаузов <dilyan.palauzov@aegee.org>
$X is appended to binary names for Windows builds (ie. git.exe).
Pollution from the environment can inadvertently trigger this behaviour,
resulting in 'git' turning into 'gitwhatever' without warning.
Signed-off-by: Michael Palimaka <kensington@astralcloak.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is necessary to write the else branch as a nested conditional. Also,
write the conditions with parentheses because we use them throughout the
Makefile.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/svn-fe: (36 commits)
vcs-svn: suppress a -Wtype-limits warning
vcs-svn: allow import of > 4GiB files
vcs-svn: rename check_overflow arguments for clarity
vcs-svn/svndiff.c: squelch false "unused" warning from gcc
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
...
There was a number of problems I ran into when trying the
profile-directed optimizations added by Andi Kleen in git commit
7ddc2710b9. (This was using gcc 4.4 found on many enterprise
distros.)
1) The -fprofile-generate and -fprofile-use commands are incompatible
with ccache; the code ends up looking in the wrong place for the gcda
files based on the ccache object names.
2) If the makefile notices that CFLAGS are different, it will rebuild
all of the binaries. Hence the recipe originally specified by the
INSTALL file ("make profile-all" followed by "make install") doesn't
work. It will appear to work, but the binaries will end up getting
built with no optimization.
This patch fixes this by using an explicit set of options passed via
the PROFILE variable then using this to directly manipulate CFLAGS and
EXTLIBS.
The developer can run "make PROFILE=BUILD all ; sudo make
PROFILE=BUILD install" automatically run a two-pass build with the
test suite run in between as the sample workload for the purpose of
recording profiling information to do the profile-directed
optimization.
Alternatively, the profiling version of binaries can be built using:
make PROFILE=GEN PROFILE_DIR=/var/cache/profile all
make PROFILE=GEN install
and then after git has been used for a while, the optimized version of
the binary can be built as follows:
make PROFILE=USE PROFILE_DIR=/var/cache/profile all
make PROFILE=USE install
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/i18n-no-gettext:
i18n: Do not force USE_GETTEXT_SCHEME=fallthrough on NO_GETTEXT
i18n: Make NO_GETTEXT imply fallthrough scheme in shell l10n
add a Makefile switch to avoid gettext translation in shell scripts
git-sh-i18n: restructure the logic to compute gettext.sh scheme
This simplifies svn-fe a great deal and fulfills a longstanding wish:
support for dumps with deltas in them, and incremental imports.
The cost is that commandline usage of the svn-fe tool becomes a little
more complicated since it no longer keeps state itself but instead reads
blobs back from fast-import in order to copy them between revisions and
apply deltas to them.
Also removes a couple of custom data structures and replaces them with
strbufs like other parts of Git.
* 'svn-fe' of git://repo.or.cz/git/jrn: (32 commits)
vcs-svn: reset first_commit_done in fast_export_init
vcs-svn: do not initialize report_buffer twice
vcs-svn: avoid hangs from corrupt deltas
vcs-svn: guard against overflow when computing preimage length
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: implement text-delta handling
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
vcs-svn: make buffer_read_binary API more convenient
vcs-svn: learn to maintain a sliding view of a file
Makefile: list one vcs-svn/xdiff object or header per line
vcs-svn: avoid using ls command twice
...
Conflicts:
Makefile
contrib/svn-fe/svn-fe.txt
It should merely be the default used when the builder does not say
anything about USE_GETTEXT_SCHEME.
Even with NO_GETTEXT, USE_GETTEXT_SCHEME=gnu may be a way to avoid
possibly slower emulation in our shell scripts.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems have gettext.sh (GNU gettext) installed, but it is either
broken or misconfigured in such a way so its output is not usable. In
case the users of these systems are unable or not interested in fixing
them, setting the new Makefile switch should help:
make USE_GETTEXT_SCHEME=fallthrough
This will replace the translation routines with fallthrough versions,
that does not use gettext from the platform.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/git-prompt:
contrib: add credential helper for OS X Keychain
Makefile: OS X has /dev/tty
Makefile: linux has /dev/tty
credential: use git_prompt instead of git_getpass
prompt: use git_terminal_prompt
add generic terminal prompt function
refactor git_getpass into generic prompt function
move git_getpass to its own source file
imap-send: don't check return value of git_getpass
imap-send: avoid buffer overflow
Conflicts:
Makefile
* tr/cache-tree:
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
* jk/credentials:
t: add test harness for external credential helpers
credentials: add "store" helper
strbuf: add strbuf_add*_urlencode
Makefile: unix sockets may not available on some platforms
credentials: add "cache" helper
docs: end-user documentation for the credential subsystem
credential: make relevance of http path configurable
credential: add credential.*.username
credential: apply helper config
http: use credential API to get passwords
credential: add function for parsing url components
introduce credentials API
t5550: fix typo
test-lib: add test_config_global variant
Conflicts:
strbuf.c
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
Therefore we can turn on our custom prompt function instead
of relying on getpass.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we need to prompt the user for input interactively, we
want to access their terminal directly. We can't rely on
stdio because it may be connected to pipes or files, rather
than the terminal. Instead, we use "getpass()", because it
abstracts the idea of prompting and reading from the
terminal. However, it has some problems:
1. It never echoes the typed characters, which makes it OK
for passwords but annoying for other input (like usernames).
2. Some implementations of getpass() have an extremely
small input buffer (e.g., Solaris 8 is reported to
support only 8 characters).
3. Some implementations of getpass() will fall back to
reading from stdin (e.g., glibc). We explicitly don't
want this, because our stdin may be connected to a pipe
speaking a particular protocol, and reading will
disrupt the protocol flow (e.g., the remote-curl
helper).
4. Some implementations of getpass() turn off signals, so
that hitting "^C" on the terminal does not break out of
the password prompt. This can be a mild annoyance.
Instead, let's provide an abstract "git_terminal_prompt"
function that addresses these concerns. This patch includes
an implementation based on /dev/tty, enabled by setting
HAVE_DEV_TTY. The fallback is to use getpass() as before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is like "cache", except that we actually put the
credentials on disk. This can be terribly insecure, of
course, but we do what we can to protect them by filesystem
permissions, and we warn the user in the documentation.
This is not unlike using .netrc to store entries, but it's a
little more user-friendly. Instead of putting credentials in
place ahead of time, we transparently store them after
prompting the user for them once.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is currently in connect.c, but really has nothing to
do with the git protocol itself. Let's make a new source
file all about prompting the user, which will make it
cleaner to refactor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a configuration option NO_UNIX_SOCKETS to exclude code that
depends on Unix sockets and use it in MSVC and MinGW builds.
Notice that unix-socket.h was missing from LIB_H before; fix that, too.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you access repositories over smart-http using http
authentication, then it can be annoying to have git ask you
for your password repeatedly. We cache credentials in
memory, of course, but git is composed of many small
programs. Having to input your password for each one can be
frustrating.
This patch introduces a credential helper that will cache
passwords in memory for a short period of time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few places in git that need to get a username
and password credential from the user; the most notable one
is HTTP authentication for smart-http pushing.
Right now the only choices for providing credentials are to
put them plaintext into your ~/.netrc, or to have git prompt
you (either on the terminal or via an askpass program). The
former is not very secure, and the latter is not very
convenient.
Unfortunately, there is no "always best" solution for
password management. The details will depend on the tradeoff
you want between security and convenience, as well as how
git can integrate with other security systems (e.g., many
operating systems provide a keychain or password wallet for
single sign-on).
This patch provides an abstract notion of credentials as a
data item, and provides three basic operations:
- fill (i.e., acquire from external storage or from the
user)
- approve (mark a credential as "working" for further
storage)
- reject (mark a credential as "not working", so it can
be removed from storage)
These operations can be backed by external helper processes
that interact with system- or user-specific secure storage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
* jc/request-pull-show-head-4:
request-pull: use the annotated tag contents
fmt-merge-msg.c: Fix an "dubious one-bit signed bitfield" sparse error
environment.c: Fix an sparse "symbol not declared" warning
builtin/log.c: Fix an "Using plain integer as NULL pointer" warning
fmt-merge-msg: use branch.$name.description
request-pull: use the branch description
request-pull: state what commit to expect
request-pull: modernize style
branch: teach --edit-description option
format-patch: use branch description in cover letter
branch: add read_branch_desc() helper function
Conflicts:
builtin/branch.c
A simple utility that invalidates all existing cache-tree data. We
need this for tests. (We don't need a tool to rebuild the cache-tree
data; git read-tree HEAD works for that.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This extends the earlier approach to stream a large file directly from the
filesystem to its own packfile, and allows "git add" to send large files
directly into a single pack. Older code used to spawn fast-import, but the
new bulk-checkin API replaces it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the COMPUTE_HEADER_DEPENDENCIES feature is turned on
automatically for compilers that support it (see v1.7.8-rc0~142^2~1,
2011-08-18), there is no easy way to force it off. For example,
setting COMPUTE_HEADER_DEPENDENCIES to the empty string in config.mak
just tells the makefile to treat it as undefined and run a test
command to see if the -MMD option is supported.
So allow setting COMPUTE_HEADER_DEPENDENCIES=no to explicitly force
the feature off. The new semantics:
- "yes" means to explicitly enable the feature
- "no" means to disable it
- "auto" means to autodetect
The default is still "auto". Any value other than these three will
cause the build to error out with a descriptive message so typos and
stale settings in config.mak don't result in mysterious behavior.
Makefile:1278: *** please set COMPUTE_HEADER_DEPENDENCIES to
yes, no, or auto (not "1"). Stop.
So now when someone using a compiler without -MMD support reports
trouble building git, you can reproduce it by running "make
COMPUTE_HEADER_DEPENDENCIES=no".
Suggested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the streaming filter API was introduced in v1.7.7-rc0~60^2~7
(2011-05-20), we forgot to add its header to LIB_H. Most translation
units depend on streaming.h via cache.h.
v1.7.5-rc0~48 (Fix sparse warnings, 2011-03-22) introduced undeclared
dependencies by url.o on url.h and thread-utils.o on thread-utils.h.
Noticed by make CHECK_HEADER_DEPENDENCIES=1.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mostly moves existing code from builtin/tag.c (for signing)
and builtin/verify-tag.c (for verifying) to a new gpg-interface.c
file to provide a more generic library interface.
- sign_buffer() takes a payload strbuf, a signature strbuf, and a signing
key, runs "gpg" to produce a detached signature for the payload, and
appends it to the signature strbuf. The contents of a signed tag that
concatenates the payload and the detached signature can be produced by
giving the same strbuf as payload and signature strbuf.
- verify_signed_buffer() takes a payload and a detached signature as
<ptr, len> pairs, and runs "gpg --verify" to see if the payload matches
the signature. It can optionally capture the output from GPG to allow
the callers to pretty-print it in a way more suitable for their
contexts.
"verify-tag" (aka "tag -v") used to save the whole tag contents as if it
is a detached signature, and fed gpg the payload part of the tag. It
relied on gpg to fail when the given tag is not signed but just is
annotated. The updated run_gpg_verify() function detects the lack of
detached signature in the input, and errors out without bothering "gpg".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since systems that omit strtoumax() will likely omit strtomax() too, and
likewise for strtoull() and strtoll(), we arrange for the make variables
NO_STRTOUMAX and NO_STRTOULL to cover both the signed and unsigned
functions, and define compatibility implementations for them.
Signed-off-by: Nick Alcock <nix@esperi.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we moved this header file in the code but forgot to
update the Makefile that refers to it.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both XSI and upstream Gnulib versions expects to find poll.h at
the root of some include path, not inside the sys-folder.
This helps us when upgrading Gnulib.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
The [ce]tags and cscope targets used to run "find" looking for any paths
that match '*.[chS]' to feed the list of source files to downstream xargs.
Use "git ls-files" if it is already available to us, and otherwise use a
tighter "find" expression that does not list directories and does not go
into our .git directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since mergetool--lib was split into multiple files in
v1.7.7-rc0~3^2~1 (2011-08-18), the Makefile takes care to reset umask
and use tar --no-owner when installing merge tool definitions to
$(gitexecdir)/mergetools/. Unfortunately it does not take into
account the possibility that the permission bits of the files being
copied might already be wrong.
Rather than fixing the "tar" incantation and making it even more
complicated, let's just use the "install" utility. This only means
losing the ability to install executables and subdirectories of
mergetools/, which wasn't used.
Noticed by installing from a copy of git checked out with umask 002.
Compare v1.6.0.3~81^2 (Fix permission bits on sources checked out with
an overtight umask, 2008-08-21).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "merge --log" and fmt-merge-msg to use branch description
information when merging a local topic branch into the mainline. The
description goes between the branch name label and the list of commit
titles.
The refactoring to share the common configuration parsing between
merge and fmt-merge-msg needs to be made into a separate patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
* jc/receive-verify:
receive-pack: check connectivity before concluding "git push"
check_everything_connected(): libify
check_everything_connected(): refactor to use an iterator
fetch: verify we have everything we need before updating our ref
Conflicts:
builtin/fetch.c
* rr/revert-cherry-pick-continue:
builtin/revert.c: make commit_list_append() static
revert: Propagate errors upwards from do_pick_commit
revert: Introduce --continue to continue the operation
revert: Don't implicitly stomp pending sequencer operation
revert: Remove sequencer state when no commits are pending
reset: Make reset remove the sequencer state
revert: Introduce --reset to remove sequencer state
revert: Make pick_commits functionally act on a commit list
revert: Save command-line options for continuing operation
revert: Save data for continuing after conflict resolution
revert: Don't create invalid replay_opts in parse_args
revert: Separate cmdline parsing from functional code
revert: Introduce struct to keep command-line options
revert: Eliminate global "commit" variable
revert: Rename no_replay to record_origin
revert: Don't check lone argument in get_encoding
revert: Simplify and inline add_message_to_msg
config: Introduce functions to write non-standard file
advice: Introduce error_resolve_conflict
The g+s bit on directories to make group ownership inherited is a
SysVism --- BSD and most of its descendants do not need it since they
do the sane thing by default without g+s. In fact, on some
filesystems (but not all --- tmpfs works this way but UFS does not),
the kernel of FreeBSD does not even allow non-root users to set setgid
bit on directories and produces errors when one tries:
$ git init --shared dir
fatal: Could not make /tmp/dir/.git/refs writable by group
Since the setgid bit would only mean "do what you were going to do
already", it's better to avoid setting it. Accordingly, ever since
v1.5.5-rc0~59^2 (Do not use GUID on dir in git init --share=all on
FreeBSD, 2008-03-05), git on true FreeBSD has done exactly that. Set
DIR_HAS_BSD_GROUP_SEMANTICS in the makefile for GNU/kFreeBSD, too, so
machines that use glibc with the kernel of FreeBSD get the same fix.
This fixes t0001-init.sh and t1301-shared-repo.sh on GNU/kFreeBSD
when running tests with --root pointing to a directory that uses
tmpfs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule code recently grew generic code to build a
dynamic argv array. Many other parts of the code can reuse
this, too, so let's make it generically available.
There are two enhancements not found in the original code:
1. We now handle the NULL-termination invariant properly,
even when no strings have been pushed (before, you
could have an empty, NULL argv). This was not a problem
for the submodule code, which always pushed at least
one argument, but was not sufficiently safe for
generic code.
2. There is a formatted variant of the "push" function.
This is a convenience function which was not needed by
the submodule code, but will make it easier to port
other users to the new code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the helper function and the type definition of the iterator
function it uses out of builtin/fetch.c into a separate source and a
header file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fk/use-kwset-pickaxe-grep-f:
obstack: Fix portability issues
Use kwset in grep
Use kwset in pickaxe
Adapt the kwset code to Git
Add string search routines from GNU grep
Add obstack.[ch] from EGLIBC 2.10
The Makefile enables CHECK_HEADER_DEPENDENCIES when the
compiler supports generating header dependencies.
Make the check use the same flags as the invocation
to avoid a false positive when user-configured compiler
flags contain incompatible options.
For example, without this patch, trying to build universal
binaries on a Mac using CFLAGS='-arch i386 -arch x86_64'
produces:
gcc-4.2: -E, -S, -save-temps and -M options are
not allowed with multiple -arch flags
While at it, remove "sh -c" in the command passed to $(shell);
at this point in the Makefile, SHELL has already been set to
a sensible shell and it is better not to override that.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/difftool-mergtool-refactor:
mergetools/meld: Use '--output' when available
mergetool--lib: Refactor tools into separate files
mergetool--lib: Make style consistent with git
difftool--helper: Make style consistent with git
Individual merge tools are now defined in a mergetools/$tool
file which is sourced at runtime.
The individual files are installed into $(git --exec-path)/mergetools/.
New tools can be added by creating a new file instead of editing the
git-mergetool--lib.sh scriptlet.
http://thread.gmane.org/gmane.comp.version-control.git/134906/focus=135006
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously you had to manually define COMPUTE_HEADER_DEPENDENCIES to
enable this feature. It seemed a bit sad that such a useful feature
had to be enabled manually.
To avoid the small overhead we don't do the auto-detection if
COMPUTE_HEADER_DEPENDENCIES is already set.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rc/histogram-diff:
xdiff/xhistogram: drop need for additional variable
xdiff/xhistogram: rely on xdl_trim_ends()
xdiff/xhistogram: rework handling of recursed results
xdiff: do away with xdl_mmfile_next()
Make test number unique
xdiff/xprepare: use a smaller sample size for histogram diff
xdiff/xprepare: skip classification
teach --histogram to diff
t4033-diff-patience: factor out tests
xdiff/xpatience: factor out fall-back-diff function
xdiff/xprepare: refactor abort cleanups
xdiff/xprepare: use memset()
Currently parse-options.o pulls quite a big bunch of dependencies.
his complicates it's usage in contrib/ because it pulls external
dependencies and it also increases executables size.
Split off less generic and more internal to git part of
parse-options.c to parse-options-cb.c.
Move prefix_filename function from setup.c to abspath.c. abspath.o
and wrapper.o pull each other, so it's unlikely to increase the
dependencies. It was a dependency of parse-options.o that pulled
many others.
Now parse-options.o pulls just abspath.o, ctype.o, strbuf.o, usage.o,
wrapper.o, libc directly and strlcpy.o indirectly.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To explicitly remove the sequencer state for a fresh cherry-pick or
revert invocation, introduce a new subcommand called "--reset" to
remove the sequencer state.
Take the opportunity to publicly expose the sequencer paths, and a
generic function called "remove_sequencer_state" that various git
programs can use to remove the sequencer state in a uniform manner;
"git reset" uses it later in this series. Introducing this public API
is also in line with our long-term goal of eventually factoring out
functions from revert.c into a generic commit sequencer.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename git-http-pull to git-http-fetch. This was passed over in 215a7ad
(Big tool rename, Wed Sep 7 17:26:23 2005 -0700).
Also, distinguish between dumb and smart in flag docs, as the "warnings"
in NO_CURL and NO_EXPACT are no longer accurate given the introduction
of smart http(s).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a $(uname_S) case for Minix with the correct options.
Minix's linker needs all libraries specified explicitly.
Add NEEDS_SSL_WITH_CURL to add -lssl when using -lcurl.
Add NEEDS_IDN_WITH_CURL to add -lidn when using -lcurl.
When NEEDS_SSL_WITH_CURL is defined and NEEDS_CRYPTO_WITH_SSL
is defined, add -lcrypt to CURL_LIBCURL.
Change OPENSSL_LINK to OPENSSL_LIBSSL in the
NEEDS_CRYPTO_WITH_SSL conditional in the libopenssl
section. Libraries go in OPENSSL_LIBSSL, OPENSSL_LINK
is for linker flags.
Signed-off-by: Thomas Cort <tcort@minix3.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/gcc46-profile-feedback:
Add explanation of the profile feedback build to the README
Add profile feedback build to git
Add option to disable NORETURN
Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show
that it is faster than its --patience cousin, as well as the default
Meyers algorithm.
The implementation has been reworked to use structs and pointers,
instead of bitmasks, thus doing away with JGit's 2^28 line limit.
We also use xdiff's default hash table implementation (xdl_hash_bits()
with XDL_HASHLONG()) for convenience.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/streaming:
sha1_file: use the correct type (ssize_t, not size_t) for read-style function
streaming: read loose objects incrementally
sha1_file.c: expose helpers to read loose objects
streaming: read non-delta incrementally from a pack
streaming_write_entry(): support files with holes
convert: CRLF_INPUT is a no-op in the output codepath
streaming_write_entry(): use streaming API in write_entry()
streaming: a new API to read from the object store
write_entry(): separate two helper functions out
unpack_object_header(): make it public
sha1_object_info_extended(): hint about objects in delta-base cache
sha1_object_info_extended(): expose a bit more info
packed_object_info_detail(): do not return a string
Some profiling tools (e.g., google-perftools and mutrace) work by
linking in a new library into the executables. When using these tools
it is convenient to only relink instead of doing a full make clean;
make cycle.
This change complements the auto-detection of changes to CFLAGS that
we already have. Tracking of more variables that affect the build can
be added when the need arise.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a gcc profile feedback build option "profile-all" to the main
Makefile. It simply runs the test suite to generate feedback data and the
recompiles the main executables with that. The basic structure is similar
to the existing gcov code.
gcc is often able to generate better code with profile feedback data. The
training load also doesn't need to be too similar to the actual load, it
still gives benefits.
The test suite run is unfortunately quite long. It would be good to find a
suitable subset that runs faster and still gives reasonable feedback.
For now the test suite runs single threaded (I had some trouble running
the test suite with -jX)
I tested it with git gc and git blame kernel/sched.c on a Linux kernel
tree. For gc I get about 2.7% improvement in wall clock time by using the
feedback build, for blame about 2.4%. That's not gigantic, but not shabby
either for a very small patch.
If anyone has any favourite CPU intensive git benchmarks feel free to try
them too.
I hope distributors will switch to use a feedback build in their packages.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a bug in gcc 4.6+ it can crash when doing profile feedback
with a noreturn function pointer
(http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49299)
This adds a Makefile variable to disable noreturns.
[Patch by Junio, description by Andi Kleen]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, on Interix, libsuacomp is required for building (see [1]).
Since suacomp provides poll() and inttypes.h for all interix versions,
remove NO_*=YesPlease that are no longer necessary.
Interix versions 3 and 5 miss struct sockaddr_storage, so make git
avoid using it.
Same for FNMATCH_CASEFOLD, which does not exist for Interix 3 and 5.
[1] http://news.gmane.org/find-root.php?message_id=%3c4DDF4440.4040405%40gentoo.org%3e
Signed-off-by: Markus Duft <mduft@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/delta-applier:
vcs-svn: cap number of bytes read from sliding view
test-svn-fe: split off "test-svn-fe -d" into a separate function
vcs-svn: let deltas use data from preimage
vcs-svn: let deltas use data from postimage
vcs-svn: verify that deltas consume all inline data
vcs-svn: implement copyfrom_data delta instruction
vcs-svn: read instructions from deltas
vcs-svn: read inline data from deltas
vcs-svn: read the preimage when applying deltas
vcs-svn: parse svndiff0 window header
vcs-svn: skeleton of an svn delta parser
vcs-svn: make buffer_read_binary API more convenient
vcs-svn: learn to maintain a sliding view of a file
Makefile: list one vcs-svn/xdiff object or header per line
Conflicts:
Makefile
vcs-svn/LICENSE
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
* jk/haves-from-alternate-odb:
receive-pack: eliminate duplicate .have refs
bisect: refactor sha1_array into a generic sha1 list
refactor refs_from_alternate_cb to allow passing extra data
* kk/maint-prefix-in-config-mak:
Honor $(prefix) set in config.mak* when defining ETC_GIT*
Revert "Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir"
Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir
* db/svn-fe-code-purge:
vcs-svn: drop obj_pool
vcs-svn: drop treap
vcs-svn: drop string_pool
vcs-svn: pass paths through to fast-import
Conflicts:
vcs-svn/fast_export.c
vcs-svn/fast_export.h
vcs-svn/repo_tree.c
vcs-svn/repo_tree.h
vcs-svn/string_pool.c
vcs-svn/svndump.c
vcs-svn/trp.txt
Given an object name, use open_istream() to get a git_istream handle
that you can read_istream() from as if you are using read(2) to read
the contents of the object, and close it with close_istream() when
you are done.
Currently, we do not do anything fancy--it just calls read_sha1_file()
and keeps the contents in memory as a whole, and carve it out as you
request with read_istream().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a generally useful abstraction, so let's let others
make use of it. The refactoring is more or less a straight
copy; however, functions and struct members have had their
names changed to match string_list, which is the most
similar data structure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We usually keep these lists in sorted order, but the last
few entries were just tacked on the end.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow NO_GECOS_IN_PWENT to be defined in the Makefile for platforms that
lack the pw_gecos field in their "struct passwd", in which case the
uppercased user name is used instead via the standard '&' replacement
mechanism.
Signed-off-by: Rafael Gieschke <rafael@gieschke.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kk/maint-prefix-in-config-mak:
Honor $(prefix) set in config.mak* when defining ETC_GIT*
Revert "Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir"
Honor $(prefix) set in config.mak* when defining ETC_GIT* and sysconfdir
Otherwise we would fail to rebuild correctly when this option was
changed between $(MAKE) invocations, and more importantly, $(MAKE) test
would not pass it down and t/test-lib.sh would not set the LIBPCRE
prerequisite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "pot" target to also extract strings from our $(SCRIPT_SH)
files with xgettext(1).
Note that due to Jonathan Nieder's trick of doing "mv $@+ $@" at the
end of the target the "pot" target will now warn:
$ make pot
XGETTEXT po/git.pot
po/git.pot+: warning: Charset "CHARSET" is not a portable encoding name.
Message conversion to user's charset might not work.
This warnings is emitted because xgettext is writing into a non-*.pot
file, it's harmless however. The content that's written out is
equivalent to what it would be if we were writing directly into an
existing POT file with --join-existing.
As part of this change I've eliminated the && chain between xgettext
calls, this is incompatible with $(QUIET_XGETTEXT), if the && is left
in it'll emit:
/bin/sh: @echo: not found
Since it's redundant (the Makefile will stop if there's an error) I've
removed it altogether.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a no-op wrapper library for Git's shell scripts. To split up the
gettext series I'm first submitting patches to gettextize the source
tree before I add any of the Makefile and Shell library changes needed
to actually use them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a git-sh-i18n--envsubst program which is a stripped-down version
of the GNU envsubst(1) program that comes with GNU gettext for use in
the eval_gettext() fallback.
We need a C helper program because implementing eval_gettext() purely
in shell turned out to be unworkable. Digging through the Git mailing
list archives will reveal two shell implementations of eval_gettext
that are almost good enough, but fail on an edge case which is tested
for in the tests which are part of this patch.
These are the modifications I made to envsubst.c as I turned it into
sh-i18n--envsubst.c:
* Added our git-compat-util.h header for xrealloc() and friends.
* Removed inclusion of gettext-specific headers.
* Removed most of main() and replaced it with my own. The modified
version only does option parsing for --variables. That's all it
needs.
* Modified error() invocations to use our error() instead of
error(3).
* Replaced the gettext XNMALLOC(n, size) macro with just
xmalloc(n). Since XNMALLOC() only allocated char's.
* Removed the string_list_destroy function. It's redundant (also in
the upstream code).
* Replaced the use of stdbool.h (a C99 header) by doing the following
replacements on the code:
* s/bool/unsigned short int/g
* s/true/1/g
* s/false/0/g
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notice that the prefix specified for the build influenced the definitions
of ETC_GITCONFIG and ETC_GITATTRIBUTES only when it was exactly '/usr'.
Kacper Kornet noticed that this was furthermore only the case when the
build was triggered using 'make prefix=/usr', i.e., the prefix was given
on the command line; it did not work when the prefix was specified in
config.mak because this file is included much later in the Makefile.
To fix this, move the conditional after the inclusion of config.mak.
Additionally, it is desirable to specify the etc directory for a build
(for example, a build with prefix /usr/local may still want to have the
system configuration in /etc/gitconfig). For this purpose, promote the
variable 'sysconfdir' from a helper variable to a configuration
variable. The prefix check that was moved must now be wrapped so that it
does not override sysconfdir setting given in config.mak.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that there is gitweb/Makefile, let's leave only "gitweb" and
"install-gitweb" targets in main Makefile. Those targets just
delegate to gitweb's Makefile.
Requested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
