Update the logic to compute alignment requirement for our mem-pool.
* jc/mem-pool-alignment:
mem-pool: don't assume uintmax_t is aligned enough for all types
Mark in various places in the code that the sparse index and the
split index features are mutually incompatible.
* js/sparse-vs-split-index:
split-index: it really is incompatible with the sparse index
t1091: disable split index
sparse-index: sparse index is disallowed when split index is active
Cloning from a repository that does not yet have any branches or
tags but has other refs resulted in a "remote transport reported
error", which has been corrected.
* jt/clone-not-quite-empty:
clone: support unusual remote ref configurations
"git sparse-checkout init" failed to write into $GIT_DIR/info
directory when the repository was created without one, which has
been corrected to auto-create it.
* jt/sparse-checkout-leading-dir-fix:
sparse-checkout: create leading directory
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
The code path that verifies signatures made with ssh were made to
work better on a system with CRLF line endings.
* fs/ssh-signing-crlf:
gpg-interface: trim CR from ssh-keygen
"git name-rev --stdin" does not behave like usual "--stdin" at
all. Start the process of renaming it to "--annotate-stdin".
* jc/name-rev-stdin:
name-rev.c: use strbuf_getline instead of limited size buffer
name-rev: deprecate --stdin in favor of --annotate-stdin
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
"git add -p" rewritten in C regressed hunk splitting in some cases,
which has been corrected.
* pw/add-p-hunk-split-fix:
builtin add -p: fix hunk splitting
t3701: clean up hunk splitting tests
We explain that revs come first before the pathspec among command
line arguments, but did not spell out that dashed options come
before other args, which has been corrected.
* tl/doc-cli-options-first:
git-cli.txt: clarify "options first and then args"
The conditional inclusion mechanism of configuration files using
"[includeIf <condition>]" learns to base its decision on the
URL of the remote repository the repository interacts with.
* jt/conditional-config-on-remote-url:
config: include file if remote URL matches a glob
config: make git_config_include() static
The merge-ort misbehaved when merge.renameLimit configuration is
set too low and failed to find all renames.
* en/merge-ort-restart-optim-fix:
merge-ort: avoid assuming all renames detected
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the __gitcomp_directories method to de-quote and handle unusual
characters in directory names. Although this initially involved an attempt
to re-use the logic in __git_index_files, this method removed
subdirectories (e.g. folder1/0/ became folder1/), so instead new custom
logic was placed directly in the __gitcomp_directories method.
Note there are two tests for this new functionality - one for spaces and
accents and one for backslashes and tabs. The backslashes and tabs test
uses FUNNYNAMES to avoid running on Windows. This is because:
1. Backslashes are explicitly not allowed in Windows file paths.
2. Although tabs appear to be allowed when creating a file in a Windows
bash shell, they actually are not renderable (and appear as empty boxes
in the shell).
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_directories method to complete directory names in cone
mode sparse-checkouts. This method addresses the caveat of poor
performance in monorepos from the previous commit (by completing only one
level of directories).
The unusual character caveat from the previous commit will be fixed by the
final commit in this series.
Co-authored-by: Elijah Newren <newren@gmail.com>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct multiple issues with tab completion of the git sparse-checkout
command. These issues were:
1. git sparse-checkout <TAB> previously resulted in an incomplete list of
subcommands (it was missing reapply and add).
2. Subcommand options were not tab-completable.
3. git sparse-checkout set <TAB> and git sparse-checkout add <TAB> showed
both file names and directory names. While this may be a less surprising
behavior for non-cone mode, cone mode sparse checkouts should complete
only directory names.
Note that while the new strategy of just using git ls-tree to complete on
directory names is simple and a step in the right direction, it does have
some caveats. These are:
1. Likelihood of poor performance in large monorepos (as a result of
recursively completing directory names).
2. Inability to handle paths containing unusual characters.
These caveats will be fixed by subsequent commits in this series.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just fixed a class of recently introduced bugs where calling, say,
`git fetch -h` outside a repository would not show the usage but instead
show an ugly `BUG` message.
Let's verify that this does not regress anymore.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught these commands about the sparse index, we did not account
for the fact that the `cmd_*()` functions _can_ be called without a
gitdir, namely when `-h` is passed to show the usage.
A plausible approach to address this is to move the
`prepare_repo_settings()` calls right after the `parse_options()` calls:
The latter will never return when it handles `-h`, and therefore it is
safe to assume that we have a `gitdir` at that point, as long as the
built-in is marked with the `RUN_SETUP` flag.
However, it is unfortunately not that simple. In `cmd_pack_objects()`,
for example, the repo settings need to be fully populated so that the
command-line options `--sparse`/`--no-sparse` can override them, not the
other way round.
Therefore, we choose to imitate the strategy taken in `cmd_diff()`,
where we simply do not bother to prepare and initialize the repo
settings unless we have a `gitdir`.
This fixes https://github.com/git-for-windows/git/issues/3688
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This method was created in f1de981e8 (config: fix leaks from
git_config_get_string_const(), 2020-08-14) but its only use was in the
repo_config_get_string_tmp() method, also declared in config.h and
implemented in config.c. Since this is otherwise unused and is a very
similar implementation to git_configset_get_value(), let's remove this
declaration.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a new worktree, it is reasonable to expect that we want to
use the current set of sparse-checkout settings for that new worktree.
This is particularly important for repositories where the worktree would
become too large to be useful. This is even more important when using
partial clone as well, since we want to avoid downloading the missing
blobs for files that should not be written to the new worktree.
The only way to create such a worktree without this intermediate step of
expanding the full worktree is to copy the sparse-checkout patterns and
config settings during 'git worktree add'. Each worktree has its own
sparse-checkout patterns, and the default behavior when the
sparse-checkout file is missing is to include all paths at HEAD. Thus,
we need to have patterns from somewhere, they might as well be the
current worktree's patterns. These are then modified independently in
the future.
In addition to the sparse-checkout file, copy the worktree config file
if worktree config is enabled and the file exists. This will copy over
any important settings to ensure the new worktree behaves the same as
the current one. The only exception we must continue to make is that
core.bare and core.worktree should become unset in the worktree's config
file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git sparse-checkout set/init` enables worktree-specific
configuration[*] by setting extensions.worktreeConfig=true, but neglects
to perform the additional necessary bookkeeping of relocating
`core.bare=true` and `core.worktree` from $GIT_COMMON_DIR/config to
$GIT_COMMON_DIR/config.worktree, as documented in git-worktree.txt. As a
result of this oversight, these settings, which are nonsensical for
secondary worktrees, can cause Git commands to incorrectly consider a
worktree bare (in the case of `core.bare`) or operate on the wrong
worktree (in the case of `core.worktree`). Fix this problem by taking
advantage of the recently-added init_worktree_config() which enables
`extensions.worktreeConfig` and takes care of necessary bookkeeping.
While at it, for backward-compatibility reasons, also stop upgrading the
repository format to "1" since doing so is (unintentionally) not
required to take advantage of `extensions.worktreeConfig`, as explained
by 11664196ac ("Revert "check_repository_format_gently(): refuse
extensions for old repositories"", 2020-07-15).
[*] The main reason to use worktree-specific config for the
sparse-checkout builtin was to avoid enabling sparse-checkout patterns
in one and causing a loss of files in another. If a worktree does not
have a sparse-checkout patterns file, then the sparse-checkout logic
will not kick in on that worktree.
Reported-by: Sean Allred <allred.sean@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some config settings, such as those for sparse-checkout, are likely
intended to only apply to one worktree at a time. To make this write
easier, add a new config API method, repo_config_set_worktree_gently().
This method will attempt to write to the worktree-specific config, but
will instead write to the common config file if worktree config is not
enabled. The next change will introduce a consumer of this method.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upgrading a repository to use extensions.worktreeConfig is non-trivial.
There are several steps involved, including moving some config settings
from the common config file to the main worktree's config.worktree file.
The previous change updated the documentation with all of these details.
Commands such as 'git sparse-checkout set' upgrade the repository to use
extensions.worktreeConfig without following these steps, causing some
user pain in some special cases.
Create a helper method, init_worktree_config(), that will be used in a
later change to fix this behavior within 'git sparse-checkout set'. The
method is carefully documented in worktree.h.
Note that we do _not_ upgrade the repository format version to 1 during
this process. The worktree config extension must be considered by Git
and third-party tools even if core.repositoryFormatVersion is 0 for
historical reasons documented in 11664196ac ("Revert
"check_repository_format_gently(): refuse extensions for old
repositories"", 2020-07-15). This is a special case for this extension,
and newer extensions (such as extensions.objectFormat) still need to
upgrade the repository format version.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extensions.worktreeConfig extension was added in 58b284a (worktree:
add per-worktree config files, 2018-10-21) and was somewhat documented
in Documentation/git-config.txt. However, the extensions.worktreeConfig
value was not specified further in the list of possible config keys. The
location of the config.worktree file is not specified, and there are
some precautions that should be mentioned clearly, but are only
mentioned in git-worktree.txt.
Expand the documentation to help users discover the complexities of
extensions.worktreeConfig by adding details and cross links in these
locations (relative to Documentation/):
- config/extensions.txt
- git-config.txt
- git-worktree.txt
The updates focus on items such as
* $GIT_DIR/config.worktree takes precedence over $GIT_COMMON_DIR/config.
* The core.worktree and core.bare=true settings are incorrect to have in
the common config file when extensions.worktreeConfig is enabled.
* The sparse-checkout settings core.sparseCheckout[Cone] are recommended
to be set in the worktree config.
As documented in 11664196ac ("Revert "check_repository_format_gently():
refuse extensions for old repositories"", 2020-07-15), this extension
must be considered regardless of the repository format version for
historical reasons.
A future change will update references to extensions.worktreeConfig
within git-sparse-checkout.txt, but a behavior change is needed before
making those updates.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in codepaths that use the "struct
transport_ls_refs_options" API. Since the introduction of the struct
in 39835409d1 (connect, transport: encapsulate arg in struct,
2021-02-05) the caller has been responsible for freeing it.
That commit in turn migrated code originally added in
402c47d939 (clone: send ref-prefixes when using protocol v2,
2018-07-20) and b4be74105f (ls-remote: pass ref prefixes when
requesting a remote's refs, 2018-03-15). Only some of those codepaths
were releasing the allocated resources of the struct, now all of them
will.
Mark the "t/t5511-refspec.sh" test as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target). Previously 24/47 tests would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that happened when the --path option was
provided. This leak has been with us ever since the option was added
in 3970243150 (add --path option to git hash-object, 2008-08-03).
We can now mark "t1007-hash-object.sh" as passing when git is compiled
with SANITIZE=leak. It'll now run in the the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index --refresh" has been taught to deal better with
racy timestamps (just like "git status" already does).
* ms/update-index-racy:
update-index: refresh should rewrite index in case of racy timestamps
t7508: add tests capturing racy timestamp handling
t7508: fix bogus mtime verification
test-lib: introduce API for verifying file mtime
Assorted updates to "git cat-file", especially "-h".
* ab/cat-file:
cat-file: s/_/-/ in typo'd usage_msg_optf() message
cat-file: don't whitespace-pad "(...)" in SYNOPSIS and usage output
cat-file: use GET_OID_ONLY_TO_DIE in --(textconv|filters)
object-name.c: don't have GET_OID_ONLY_TO_DIE imply *_QUIETLY
cat-file: correct and improve usage information
cat-file: fix remaining usage bugs
cat-file: make --batch-all-objects a CMDMODE
cat-file: move "usage" variable to cmd_cat_file()
cat-file docs: fix SYNOPSIS and "-h" output
parse-options API: add a usage_msg_optf()
cat-file tests: test messaging on bad objects/paths
cat-file tests: test bad usage
Fix a hand-rolled alloca() imitation that may have violated
alignment requirement of data being sorted in compatibility
implementation of qsort_s() and stable qsort().
* jc/qsort-s-alignment-fix:
stable-qsort: avoid using potentially unaligned access
compat/qsort_s.c: avoid using potentially unaligned access
"git apply" (ab)used the util pointer of the string-list to keep
track of how each symbolic link needs to be handled, which has been
simplified by using strset.
* rs/apply-symlinks-use-strset:
apply: use strsets to track symlinks
Code clean-up.
* rs/grep-expr-cleanup:
grep: use grep_and_expr() in compile_pattern_and()
grep: extract grep_binexp() from grep_or_expr()
grep: use grep_not_expr() in compile_pattern_not()
grep: use grep_or_expr() in compile_pattern_or()
* jh/p4-spawning-external-commands-cleanup:
git-p4: don't print shell commands as python lists
git-p4: pass command arguments as lists instead of using shell
git-p4: don't select shell mode using the type of the command argument
"git pull --rebase" ignored the rebase.autostash configuration
variable when the remote history is a descendant of our history,
which has been corrected.
* pb/pull-rebase-autostash-fix:
pull --rebase: honor rebase.autostash when fast-forwarding
* add '<>' around arguments where missing
* convert plurals into '...' forms
This applies the style guide for documentation.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same message when an invalid value is passed to a command line
option or a configuration variable.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Find more incompatible options to factorize.
When more than two options are mutually exclusive, print the ones
which are actually on the command line.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have this file added in 06ba9d03e3 (t0051: test GIT_TRACE to a
windows named pipe, 2018-09-11) use the same "skip_all" pattern as an
existing Windows-only test added in 0e218f91c2 (mingw: unset PERL5LIB
by default, 2018-10-30) uses.
This way TAP consumers like "prove" will show a nice summary when the
test is skipped. Instead of:
$ prove t0051-windows-named-pipe.sh
[...]
t0051-windows-named-pipe.sh .. ok
[...]
We will prominently show a "skipped" notice:
$ prove t0051-windows-named-pipe.sh
[...]
t0051-windows-named-pipe.sh ... skipped: skipping Windows-specific tests
[...]
This is because we are now making use of the right TAP-y way to
communicate this to the consumer. I.e. skipping the whole test file,
v.s. skipping individual tests (in this case there's only one test).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To improve the submodules UX, we would like to teach Git to handle
branches in submodules. Start this process by teaching "git branch" the
--recurse-submodules option so that "git branch --recurse-submodules
topic" will create the `topic` branch in the superproject and its
submodules.
Although this commit does not introduce breaking changes, it does not
work well with existing --recurse-submodules commands because "git
branch --recurse-submodules" writes to the submodule ref store, but most
commands only consider the superproject gitlink and ignore the submodule
ref store. For example, "git checkout --recurse-submodules" will check
out the commits in the superproject gitlinks (and put the submodules in
detached HEAD) instead of checking out the submodule branches.
Because of this, this commit introduces a new configuration value,
`submodule.propagateBranches`. The plan is for Git commands to
prioritize submodule ref store information over superproject gitlinks if
this value is true. Because "git branch --recurse-submodules" writes to
submodule ref stores, for the sake of clarity, it will not function
unless this configuration value is set.
This commit also includes changes that support working with submodules
from a superproject commit because "branch --recurse-submodules" (and
future commands) need to read .gitmodules and gitlinks from the
superproject commit, but submodules are typically read from the
filesystem's .gitmodules and the index's gitlinks. These changes are:
* add a submodules_of_tree() helper that gives the relevant
information of an in-tree submodule (e.g. path and oid) and
initializes the repository
* add is_tree_submodule_active() by adding a treeish_name parameter to
is_submodule_active()
* add the "submoduleNotUpdated" advice to advise users to update the
submodules in their trees
Incidentally, fix an incorrect usage string that combined the 'list'
usage of git branch (-l) with the 'create' usage; this string has been
incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use
parse_options., 2007-10-07).
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug that's been here since 7cc8f97108 (pack-objects: implement
bitmap writing, 2013-12-21), we did not call stop_progress() if we
reached the early exit in this function.
We could call stop_progress() before we return, but better yet is to
defer calling start_progress() until we need it. For now this only
matters in practice because we'd previously omit the "region_leave"
for the progress trace2 event.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug that's been with us ever since 98a1364740 (trace2: log
progress time and throughput, 2020-05-12), when the
stop_progress_msg() API was used we didn't log a "region_leave" for
the "region_enter" we start in "start_progress_delay()".
The only user of the "stop_progress_msg()" function is
"index-pack". Let's add a previously failing test to check that we
have the same number of "region_enter" and "region_leave" events, with
"-v" we'll log progress even in the test environment.
In addition to that we've had a submarine bug here introduced with
9d81ecb52b (progress: add sparse mode to force 100% complete message,
2019-03-21). The "start_sparse_progress()" API would only do the right
thing if the progress was ended with "stop_progress()", not
"stop_progress_msg()".
The only user of that API uses "stop_progress()", but let's still fix
that along with the trace2 issue by making "stop_progress()" a trivial
wrapper for "stop_progress_msg()".
We can also drop the "if (progress)" test from
"finish_if_sparse()". It's now a helper for the small
"stop_progress_msg()" function. We'll already have returned from it if
"progress" is "NULL".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create two new static helpers for the stop_progress() and
stop_progress_msg() functions.
As we'll see in the subsequent commit having those two split up
doesn't make much sense, and results in a bug in how we log to
trace2. This narrow preparatory change makes the diff for that
subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
