The 'contents' atom does not show any error if used with 'trailers'
atom and colon is missing before trailers arguments.
e.g %(contents:trailersonly) works, while it shouldn't.
It is definitely not an expected behavior.
Let's fix this bug.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there are different tests for testing %(trailers) and
%(contents:trailers) causing redundant copy.
Its time to get rid of duplicate code.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" and other "for-each-ref" variants accepted multiple
--sort=<key> options in the increasing order of precedence, but it
had a few breakages around "--ignore-case" handling, and tie-breaking
with the refname, which have been fixed.
* jk/for-each-ref-multi-key-sort-fix:
ref-filter: apply fallback refname sort only after all user sorts
ref-filter: apply --ignore-case to all sorting keys
Commit 9e468334b4 (ref-filter: fallback on alphabetical comparison,
2015-10-30) taught ref-filter's sort to fallback to comparing refnames.
But it did it at the wrong level, overriding the comparison result for a
single "--sort" key from the user, rather than after all sort keys have
been exhausted.
This worked correctly for a single "--sort" option, but not for multiple
ones. We'd break any ties in the first key with the refname and never
evaluate the second key at all.
To make matters even more interesting, we only applied this fallback
sometimes! For a field like "taggeremail" which requires a string
comparison, we'd truly return the result of strcmp(), even if it was 0.
But for numerical "value" fields like "taggerdate", we did apply the
fallback. And that's why our multiple-sort test missed this: it uses
taggeremail as the main comparison.
So let's start by adding a much more rigorous test. We'll have a set of
commits expressing every combination of two tagger emails, dates, and
refnames. Then we can confirm that our sort is applied with the correct
precedence, and we'll be hitting both the string and value comparators.
That does show the bug, and the fix is simple: moving the fallback to
the outer compare_refs() function, after all ref_sorting keys have been
exhausted.
Note that in the outer function we don't have an "ignore_case" flag, as
it's part of each individual ref_sorting element. It's debatable what
such a fallback should do, since we didn't use the user's keys to match.
But until now we have been trying to respect that flag, so the
least-invasive thing is to try to continue to do so. Since all callers
in the current code either set the flag for all keys or for none, we can
just pull the flag from the first key. In a hypothetical world where the
user really can flip the case-insensitivity of keys separately, we may
want to extend the code to distinguish that case from a blanket
"--ignore-case".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the ref-filter users (for-each-ref, branch, and tag) take an
--ignore-case option which makes filtering and sorting case-insensitive.
However, this option was applied only to the first element of the
ref_sorting list. So:
git for-each-ref --ignore-case --sort=refname
would do what you expect, but:
git for-each-ref --ignore-case --sort=refname --sort=taggername
would sort the primary key (taggername) case-insensitively, but sort the
refname case-sensitively. We have two options here:
- teach callers to set ignore_case on the whole list
- replace the ref_sorting list with a struct that contains both the
list of sorting keys, as well as options that apply to _all_
keys
I went with the first one here, as it gives more flexibility if we later
want to let the users set the flag per-key (presumably through some
special syntax when defining the key; for now it's all or nothing
through --ignore-case).
The new test covers this by sorting on both tagger and subject
case-insensitively, which should compare "a" and "A" identically, but
still sort them before "b" and "B". We'll break ties by sorting on the
refname to give ourselves a stable output (this is actually supposed to
be done automatically, but there's another bug which will be fixed in
the next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the git for-each-ref tests asks to sort by object ID. However,
when sorted, the order of the refs differs between SHA-1 and SHA-256.
Sort the expected output so that the test passes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"for-each-ref" and friends that shows refs did not protect themselves
against ancient tags that did not record tagger names when asked to
show "%(taggername)", which have been corrected.
* mp/for-each-ref-missing-name-or-email:
ref-filter: initialize empty name or email fields
Formatting $(taggername) on headerless tags such as v0.99 in Git
causes a SIGABRT with error "munmap_chunk(): invalid pointer",
because of an oversight in commit f0062d3b74 (ref-filter: free
item->value and item->value->s, 2018-10-19).
Signed-off-by: Mischa POSLAWSKY <git@shiar.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cfe004a5a9 (ref-filter: limit traversal to prefix, 2017-05-22),
the ref-filter code has sought to limit the traversals to a prefix of
the given patterns.
That code stopped short of handling more than one pattern, because it
means invoking 'for_each_ref_in' multiple times. If we're not careful
about which patterns overlap, we will output the same refs multiple
times.
For instance, consider the set of patterns 'refs/heads/a/*',
'refs/heads/a/b/c', and 'refs/tags/v1.0.0'. If we naïvely ran:
for_each_ref_in("refs/heads/a/*", ...);
for_each_ref_in("refs/heads/a/b/c", ...);
for_each_ref_in("refs/tags/v1.0.0", ...);
we would see 'refs/heads/a/b/c' (and everything underneath it) twice.
Instead, we want to partition the patterns into disjoint sets, where we
know that no ref will be matched by any two patterns in different sets.
In the above, these are:
- {'refs/heads/a/*', 'refs/heads/a/b/c'}, and
- {'refs/tags/v1.0.0'}
Given one of these disjoint sets, what is a suitable pattern to pass to
'for_each_ref_in'? One approach is to compute the longest common prefix
over all elements in that disjoint set, and let the caller cull out the
refs they didn't want. Computing the longest prefix means that in most
cases, we won't match too many things the caller would like to ignore.
The longest common prefixes of the above are:
- {'refs/heads/a/*', 'refs/heads/a/b/c'} -> refs/heads/a/*
- {'refs/tags/v1.0.0'} -> refs/tags/v1.0.0
We instead invoke:
for_each_ref_in("refs/heads/a/*", ...);
for_each_ref_in("refs/tags/v1.0.0", ...);
Which provides us with the refs we were looking for with a minimal
amount of extra cruft, but never a duplicate of the ref we asked for.
Implemented here is an algorithm which accomplishes the above, which
works as follows:
1. Lexicographically sort the given list of patterns.
2. Initialize 'prefix' to the empty string, where our goal is to
build each element in the above set of longest common prefixes.
3. Consider each pattern in the given set, and emit 'prefix' if it
reaches the end of a pattern, or touches a wildcard character. The
end of a string is treated as if it precedes a wildcard. (Note that
there is some room for future work to detect that, e.g., 'a?b' and
'abc' are disjoint).
4. Otherwise, recurse on step (3) with the slice of the list
corresponding to our current prefix (i.e., the subset of patterns
that have our prefix as a literal string prefix.)
This algorithm is 'O(kn + n log(n))', where 'k' is max(len(pattern)) for
each pattern in the list, and 'n' is len(patterns).
By discovering this set of interesting patterns, we reduce the runtime
of multi-pattern 'git for-each-ref' (and other ref traversals) from
O(N) to O(n log(N)), where 'N' is the total number of packed references.
Running 'git for-each-ref refs/tags/a refs/tags/b' on a repository with
10,000,000 refs in 'refs/tags/huge-N', my best-of-five times drop from:
real 0m5.805s
user 0m5.188s
sys 0m0.468s
to:
real 0m0.001s
user 0m0.000s
sys 0m0.000s
On linux.git, the times to dig out two of the latest -rc tags drops from
0.002s to 0.001s, so the change on repositories with fewer tags is much
less noticeable.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ref-filter.c, when processing the atom %(push:track), the
ahead/behind values are computed using `stat_tracking_info` which refers
to the upstream branch.
Fix that by introducing a new flag `for_push` in `stat_tracking_info`
in remote.c, which does the same thing but for the push branch.
Update the few callers of `stat_tracking_info` to handle this flag. This
ensure that whenever we use this function in the future, we are careful
to specify is this should apply to the upstream or the push branch.
This bug was not detected in t/t6300-for-each-ref.sh because in the test
for push:track, both the upstream and the push branches were behind by 1
from the local branch. Change the test so that the upstream branch is
behind by 1 while the push branch is ahead by 1. This allows us to test
that %(push:track) refers to the correct branch.
This changes the expected value of some following tests (by introducing
new references), so update them too.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
In both of these cases we know that we are feeding the
trailer-parsing code a pure commit message. We should tell
it so, which avoids false positives for a commit message
that contains a "---" line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--ignore-case" option of "git for-each-ref" (and its friends)
did not work correctly, which has been fixed.
* jk/for-each-ref-icase:
ref-filter: avoid backend filtering with --ignore-case
for-each-ref: consistently pass WM_IGNORECASE flag
t6300: add a test for --ignore-case
When for-each-ref is used with --ignore-case, we expect
match_name_as_path() to do a case-insensitive match. But
there's an extra layer of filtering that happens before we
even get there. Since commit cfe004a5a9 (ref-filter: limit
traversal to prefix, 2017-05-22), we feed the prefix to the
ref backend so that it can optimize the ref iteration.
There's no mechanism for us to tell the backend we're matching
case-insensitively. Nor is there likely to be one anytime soon,
since the packed backend relies on binary-searching the sorted list
of refs. Let's just punt on this case. The extra filtering is an
optimization that we simply can't do. We'll still give the correct
answer via the filtering in match_name_as_path().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --ignore-case option was added by 3bb16a8bf2 (tag,
branch, for-each-ref: add --ignore-case for sorting and
filtering, 2016-12-04), but it was never tested. And indeed,
it does not work due to multiple bugs (which will be fixed
in subsequent patches).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_z40/$ZERO_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git for-each-ref' should error out when invoked with more than one
quoting style options. The tests checking this have two issues:
- They run 'git for-each-ref' upstream of a pipe, hiding its exit
code, thus don't actually checking that 'git for-each-ref' exits
with error code.
- They check the error message in a rather roundabout way.
Ensure that 'git for-each-ref' exits with an error code using the
'test_must_fail' helper function, and check its error message by
grepping its saved standard error.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--format=..." option "git for-each-ref" takes learned to show
the name of the 'remote' repository and the ref at the remote side
that is affected for 'upstream' and 'push' via "%(push:remotename)"
and friends.
* js/for-each-ref-remote-name-and-ref:
for-each-ref: test :remotename and :remoteref
for-each-ref: let upstream/push report the remote ref name
for-each-ref: let upstream/push optionally report the remote name
This not only prevents regressions, but also serves as documentation
what this new feature is expected to do.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
Since 11b087adfd (ref-filter: consult want_color() before
emitting colors, 2017-07-13), we expect that setting
"color.ui" to "always" will enable color tag formats even
without a tty. As that commit was built on top of
136c8c8b8f (color: check color.ui in git_default_config(),
2017-07-13) from the same series, we didn't need to touch
tag's config parsing at all.
However, since we reverted 136c8c8b8f, we now need to
explicitly call git_color_default_config() to make this
work.
Let's do so, and also restore the test dropped in 0c88bf5050
(provide --color option for all ref-filter users,
2017-10-03). That commit swapped out our "color.ui=always"
test for "--color" in preparation for "always" going away.
But since it is here to stay, we should test both cases.
Note that for-each-ref also lost its color.ui support as
part of reverting 136c8c8b8f. But as a plumbing command, it
should _not_ respect the color.ui config. Since it also
gained a --color option in 0c88bf5050, that's the correct
way to ask it for color. We'll continue to test that, and
confirm that "color.ui" is not respected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-ref --format=..." learned a new format element,
%(trailers), to show only the commit log trailer part of the log
message.
* tb/show-trailers-in-ref-filter:
ref-filter.c: parse trailers arguments with %(contents) atom
ref-filter.c: use trailer_opts to format trailers
t6300: refactor %(trailers) tests
doc: use "`<literal>`"-style quoting for literal strings
doc: 'trailers' is the preferred way to format trailers
t4205: unfold across multiple lines
In the "--format=..." option of the "git for-each-ref" command (and
its friends, i.e. the listing mode of "git branch/tag"), "%(atom:)"
(e.g. "%(refname:)", "%(body:)" used to error out. Instead, treat
them as if the colon and an empty string that follows it were not
there.
* tb/ref-filter-empty-modifier:
ref-filter.c: pass empty-string as NULL to atom parsers
Peff points out that different atom parsers handle the empty
"sub-argument" list differently. An example of this is the format
"%(refname:)".
Since callers often use `string_list_split` (which splits the empty
string with any delimiter as a 1-ary string_list containing the empty
string), this makes handling empty sub-argument strings non-ergonomic.
Let's fix this by declaring that atom parser implementations must
not care about distinguishing between the empty string "%(refname:)"
and no sub-arguments "%(refname)". Current code aborts, either with
"unrecognised arg" (e.g. "refname:") or "does not take args"
(e.g. "body:") as an error message.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ref-filter learned about want_color() in 11b087adfd
(ref-filter: consult want_color() before emitting colors,
2017-07-13), it became useful to be able to turn colors off
and on for specific commands. For git-branch, you can do so
with --color/--no-color.
But for git-for-each-ref and git-tag, the other users of
ref-filter, you have no option except to tweak the
"color.ui" config setting. Let's give both of these commands
the usual color command-line options.
This is a bit more obvious as a method for overriding the
config. And it also prepares us for the behavior of "always"
changing (so that we are still left with a way of forcing
color when our output goes to a non-terminal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of the test-terminal script is to simulate in the
test scripts an environment where output is going to a real
terminal.
But since test-lib.sh also sets TERM=dumb, the simulation
isn't very realistic. The color code will skip auto-coloring
for TERM=dumb, leading to us liberally sprinkling
test_terminal env TERM=vt100 git ...
through the test suite to convince the tests to actually
generate colors. Let's set TERM for programs run under
test_terminal, which is one less thing for test-writers to
remember.
In most cases the callers can be simplified, but note there
is one interesting case in t4202. It uses test_terminal to
check the auto-enabling of --decorate, but the expected
output _doesn't_ contain colors (because TERM=dumb
suppresses them). Using TERM=vt100 is closer to what the
real world looks like; adjust the expected output to match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The %(contents) atom takes a contents "field" as its argument. Since
"trailers" is one of those fields, extend contents_atom_parser to parse
"trailers"'s arguments when used through "%(contents)", like:
%(contents:trailers:unfold,only)
A caveat: trailers_atom_parser expects NULL when no arguments are given
(see: `parse_ref_filter_atom`). This is because string_list_split (given
a maxsplit of -1) returns a 1-ary string_list* containing the given
string if the delimiter could not be found using `strchr`.
To simulate this behavior without teaching trailers_atom_parser to
accept strings with length zero, conditionally pass NULL to
trailers_atom_parser if the arguments portion of the argument to
%(contents) is empty.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fill trailer_opts with "unfold" and "only" to match the sub-arguments
given to the "%(trailers)" atom. Then, let's use the filled trailer_opts
instance with 'format_trailers_from_commit' in order to format trailers
in the desired manner.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have one test for %(trailers) in `git-for-each-ref(1)`,
through "%(contents:trailers)". In preparation for more, let's add a few
things:
- Move the commit creation step to its own test so that it can be
re-used.
- Add a non-trailer to the commit's trailers to test that non-trailers
aren't shown using "%(trailers:only)".
- Add a multi-line trailer to ensure that trailers are unfolded
correctly using "%(trailers:unfold)".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When color placeholders like %(color:red) are used in a
ref-filter format, we unconditionally output the colors,
even if the user has asked us for no colors. This usually
isn't a problem when the user is constructing a --format on
the command line, but it means we may do the wrong thing
when the format is fed from a script or alias. For example:
$ git config alias.b 'branch --format=%(color:green)%(refname)'
$ git b --no-color
should probably omit the green color. Likewise, running:
$ git b >branches
should probably also omit the color, just as we would for
all baked-in coloring (and as we recently started to do for
user-specified colors in --pretty formats).
This commit makes both of those cases work by teaching
the ref-filter code to consult want_color() before
outputting any color. The color flag in ref_format defaults
to "-1", which means we'll consult color.ui, which in turn
defaults to the usual isatty() check on stdout. However,
callers like git-branch which support their own color config
(and command-line options) can override that.
The new tests independently cover all three of the callers
of ref-filter (for-each-ref, tag, and branch). Even though
these seem redundant, it confirms that we've correctly
plumbed through all of the necessary config to make colors
work by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we put literal ANSI terminal codes into our test
scripts, it makes diffs on those scripts hard to read (the
colors may be indistinguishable from diff coloring, or in
the case of a reset, may not be visible at all).
Some scripts get around this by including human-readable
names and converting to literal codes with a git-config
hack. This makes the actual code diffs look OK, but test_cmp
output suffers from the same problem.
Let's use test_decode_color instead, which turns the codes
into obvious text tags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In one test, we use "git checkout --orphan HEAD" to create
an unborn branch. Confusingly, the resulting branch is named
"refs/heads/HEAD". The original probably meant something
like:
git checkout --orphan orphaned-branch HEAD
Let's just use "orphaned-branch" here to make this less
confusing. Putting HEAD in the second argument is already
implied.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot that "strip" was introduced at 0571979bd6 ("tag: do not
show ambiguous tag names as "tags/foo"", 2016-01-25) as part of Git
2.8 (and 2.7.1) when we started calling this "lstrip" to make it
easier to explain the new "rstrip" operation.
We shouldn't have renamed the existing one; "lstrip" should have
been a new synonym that means the same thing as "strip". Scripts
in the wild are surely using the original form already.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complimenting the existing 'lstrip=<N>' option, add an 'rstrip=<N>'
option which strips `<N>` slash-separated path components from the end
of the refname (e.g., `%(refname:rstrip=2)` turns `refs/tags/foo` into
`refs`).
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the 'lstrip=<N>' option only takes a positive value '<N>'
and strips '<N>' slash-separated path components from the left. Modify
the 'lstrip' option to also take a negative number '<N>' which would
strip from the left as necessary and _leave_ behind only 'N'
slash-separated path components from the right-most end.
For e.g. %(refname:lstrip=-1) would make 'foo/goo/abc' into 'abc'.
Add documentation and tests for the same.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when we use the 'lstrip=<N>' option, if 'N' is greater than
the number of components available in the refname, we abruptly end
program execution by calling die().
This behavior is undesired since a single refname with few components
could end program execution. To avoid this, return an empty string
whenever the value 'N' is greater than the number of components
available, instead of calling die().
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the upcoming patch, where we introduce the 'rstrip'
option. Rename the 'strip' option to 'lstrip' to remove ambiguity.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the recently introduced refname_atom_parser_internal() within
remote_ref_atom_parser(), this provides a common base for all the ref
printing atoms, allowing %(upstream) and %(push) to also use the
':strip' option.
The atoms '%(push)' and '%(upstream)' will retain the ':track' and
':trackshort' atom modifiers to themselves as they have no meaning in
context to the '%(refname)' and '%(symref)' atoms.
Update the documentation and tests to reflect the same.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using refname_atom_parser_internal(), introduce refname_atom_parser()
which will parse the %(symref) and %(refname) atoms. Store the parsed
information into the 'used_atom' structure based on the modifiers used
along with the atoms.
Now the '%(symref)' atom supports the ':strip' atom modifier. Update the
Documentation and tests to reflect this.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "%(symref)" atom doesn't work when used with the ':short' modifier
because we strictly match only 'symref' for setting the 'need_symref'
indicator. Fix this by comparing with the valid_atom rather than the
used_atom.
Add tests for %(symref) and %(symref:short) while we're here.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for %(upstream:track,nobracket) which will print the
tracking information without the brackets (i.e. "ahead N, behind M").
This is needed when we port branch.c to use ref-filter's printing APIs.
Add test and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrowing from branch.c's implementation print "[gone]" whenever an
unknown upstream ref is encountered instead of just ignoring it.
This makes sure that when branch.c is ported over to using ref-filter
APIs for printing, this feature is not lost.
Make changes to t/t6300-for-each-ref.sh and
Documentation/git-for-each-ref.txt to reflect this change.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by : Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for %(objectname:short=<length>) which would print the
abbreviated unique objectname of given length. When no length is
specified, the length is 'DEFAULT_ABBREV'. The minimum length is
'MINIMUM_ABBREV'. The length may be exceeded to ensure that the
provided object name is unique.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to %(subject), %(body), "log --pretty=format:..."
learned a new placeholder %(trailers).
* jk/trailers-placeholder-in-pretty:
ref-filter: add support to display trailers as part of contents
pretty: add %(trailers) format for displaying trailers of a commit message
Add %(trailers) and %(contents:trailers) to display the trailers as
interpreted by trailer_info_get. Update documentation and add a test for
the new feature.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
