Don't redundantly run "git reflog expire --all" when gc.reflogExpire
and gc.reflogExpireUnreachable are set to "never", and die immediately
if those configuration valuer are bad.
As an earlier "assert lack of early exit" change to the tests for "git
reflog expire" shows, an early check of gc.reflogExpire{Unreachable,}
isn't wanted in general for "git reflog expire", but it makes sense
for "gc" because:
1) Similarly to 8ab5aa4bd8 ("parseopt: handle malformed --expire
arguments more nicely", 2018-04-21) we'll now die early if the
config variables are set to invalid values.
We run "pack-refs" before "reflog expire", which can take a while,
only to then die on an invalid gc.reflogExpire{Unreachable,}
configuration.
2) Not invoking the command at all means it won't show up in trace
output, which makes what's going on more obvious when the two are
set to "never".
3) As a later change documents we lock the refs when looping over the
refs to expire, even in cases where we end up doing nothing due to
this config.
For the reasons noted in the earlier "assert lack of early exit"
change I don't think it's worth it to bend over backwards in "git
reflog expire" itself to carefully detect if we'll really do
nothing given the combination of all its possible options and skip
that locking, but that's easy to detect here in "gc" where we'll
only run "reflog expire" in a relatively simple mode.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an idiom we're using to ensure that gc_before_repack() only
does work once (see 62aad1849f ("gc --auto: do not lock refs in the
background", 2014-05-25)) to be more obvious.
Nothing except this function cares about the "pack_refs" and
"prune_reflogs" variables, so let's not leave the reader wondering if
they're being zero'd out for later use somewhere else.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's been a lot of changing of the hardcoded "40" values to
the_hash_algo->hexsz, but we've so far missed this one where we
hardcoded 38 for the loose object file length.
This is because a SHA-1 like abcde[...] gets turned into
objects/ab/cde[...]. There's no reason to suppose the same won't be
the case for SHA-256, and reading between the lines in
hash-function-transition.txt the format is planned to be the same.
In the future we may want to further modify this code for the hash
function transition. There's a potential pathological case here where
we'll only consider the loose objects for the currently active hash,
but objects for that hash will share a directory storage with the
other hash.
Thus we could theoretically have e.g. 1k SHA-1 loose objects, and 1
million SHA-256 objects. Then not notice that we need to pack them
because we're currently using SHA-1, even though our FS may be
straining under the stress of such humongous directories.
So assuming that "gc" eventually learns to pack up both SHA-1 and
SHA-256 objects regardless of what the current the_hash_algo is,
perhaps this check should be changed to consider all files in
objects/17/ matching [0-9a-f] 38 or 62 characters in length (i.e. both
SHA-1 and SHA-256).
But none of that is something we need to worry about now, and
supporting both 38 and 62 characters depending on "the_hash_algo"
removes another case of SHA-1 hardcoding.
As noted in [1] I'm making no effort to somehow remove the hardcoding
for "2" as in "use the first two hexdigits for the directory
name". There's no indication that that'll ever change, and somehow
generalizing it here would be a drop in the ocean, so there's no point
in doing that. It also couldn't be done without coming up with some
generalized version of the magical "objects/17" directory. See [2] for
a discussion of that directory.
1. https://public-inbox.org/git/874l84ber7.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/87k1mta9x5.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking gc_auto_threshold in too_many_loose_objects() was added in
17815501a8 ("git-gc --auto: run "repack -A -d -l" as necessary.",
2007-09-17) when need_to_gc() itself was also reliant on
gc_auto_pack_limit before its early return:
gc_auto_threshold <= 0 && gc_auto_pack_limit <= 0
When that check was simplified to just checking "gc_auto_threshold <=
0" in b14d255ba8 ("builtin-gc.c: allow disabling all auto-gc'ing by
assigning 0 to gc.auto", 2008-03-19) this unreachable code should have
been removed. We only call too_many_loose_objects() from within
need_to_gc() itself, which will return if this condition holds, and in
cmd_gc() which will return before ever getting to "auto_gc &&
too_many_loose_objects()" if "auto_gc && !need_to_gc()" is true
earlier in the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and "git repack" did not close the open packfiles that
they found unneeded before removing them, which didn't work on a
platform incapable of removing an open file. This has been
corrected.
* js/gc-repack-close-before-remove:
gc/repack: release packs when needed
On Windows, files cannot be removed nor renamed if there are still
handles held by a process. To remedy that, we introduced the
close_all_packs() function.
Earlier, we made sure that the packs are released just before `git gc`
is spawned, in case that gc wants to remove no-longer needed packs.
But this developer forgot that gc itself also needs to let go of packs,
e.g. when consolidating all packs via the --aggressive option.
Likewise, `git repack -d` wants to delete obsolete packs and therefore
needs to close all pack handles, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We indent with TABs and sometimes for fine alignment, TABs followed by
spaces, but never all spaces (unless the indentation is less than 8
columns). Indenting with spaces slips through in some places. Fix
them.
Imported code and compat/ are left alone on purpose. The former should
remain as close as upstream as possible. The latter pretty much has
separate maintainers, it's up to them to decide.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"gc --auto" ended up calling exit(-1) upon error, which has been
corrected to use exit(1). Also the error reporting behaviour when
daemonized has been updated to exit with zero status when stopping
due to a previously discovered error (which implies there is no
point running gc to improve the situation); we used to exit with
failure in such a case.
* jn/gc-auto:
gc: do not return error for prior errors in daemonized mode
Generation of (experimental) commit-graph files have so far been
fairly silent, even though it takes noticeable amount of time in a
meaningfully large repository. The users will now see progress
output.
* ab/commit-graph-progress:
gc: fix regression in 7b0f229222 impacting --quiet
commit-graph verify: add progress output
commit-graph write: add progress output
Fix a regression in my recent 7b0f229222 ("commit-graph write: add
progress output", 2018-09-17). The newly added progress output for
"commit-graph write" didn't check the --quiet option.
Do so, and add a test asserting that this works as expected. Since the
TTY prequisite isn't available everywhere let's add a version of this
that both requires and doesn't require that. This test might be overly
specific and will break if new progress output is added, but I think
it'll serve as a good reminder to test the undertested progress
mode(s).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this change the "commit-graph write" command didn't report any
progress. On my machine this command takes more than 10 seconds to
write the graph for linux.git, and around 1m30s on the
2015-04-03-1M-git.git[1] test repository (a test case for a large
monorepository).
Furthermore, since the gc.writeCommitGraph setting was added in
d5d5d7b641 ("gc: automatically write commit-graph files", 2018-06-27),
there was no indication at all from a "git gc" run that anything was
different. This why one of the progress bars being added here uses
start_progress() instead of start_delayed_progress(), so that it's
guaranteed to be seen. E.g. on my tiny 867 commit dotfiles.git
repository:
$ git -c gc.writeCommitGraph=true gc
Enumerating objects: 2821, done.
[...]
Computing commit graph generation numbers: 100% (867/867), done.
On larger repositories, such as linux.git the delayed progress bar(s)
will kick in, and we'll show what's going on instead of, as was
previously happening, printing nothing while we write the graph:
$ git -c gc.writeCommitGraph=true gc
[...]
Annotating commits in commit graph: 1565573, done.
Computing commit graph generation numbers: 100% (782484/782484), done.
Note that here we don't show "Finding commits for commit graph", this
is because under "git gc" we seed the search with the commit
references in the repository, and that set is too small to show any
progress, but would e.g. on a smaller repo such as git.git with
--stdin-commits:
$ git rev-list --all | git -c gc.writeCommitGraph=true write --stdin-commits
Finding commits for commit graph: 100% (162576/162576), done.
Computing commit graph generation numbers: 100% (162576/162576), done.
With --stdin-packs we don't show any estimation of how much is left to
do. This is because we might be processing more than one pack. We
could be less lazy here and show progress, either by detecting that
we're only processing one pack, or by first looping over the packs to
discover how many commits they have. I don't see the point in doing
that work. So instead we get (on 2015-04-03-1M-git.git):
$ echo pack-<HASH>.idx | git -c gc.writeCommitGraph=true --exec-path=$PWD commit-graph write --stdin-packs
Finding commits for commit graph: 13064614, done.
Annotating commits in commit graph: 3001341, done.
Computing commit graph generation numbers: 100% (1000447/1000447), done.
No GC mode uses --stdin-packs. It's what they use at Microsoft to
manually compute the generation numbers for their collection of large
packs which are never coalesced.
The reason we need a "report_progress" variable passed down from "git
gc" is so that we don't report this output when we're running in the
process "git gc --auto" detaches from the terminal.
Since we write the commit graph from the "git gc" process itself (as
opposed to what we do with say the "git repack" phase), we'd end up
writing the output to .git/gc.log and reporting it to the user next
time as part of the "The last gc run reported the following[...]"
error, see 329e6e8794 ("gc: save log from daemonized gc --auto and
print it next time", 2015-09-19).
So we must keep track of whether or not we're running in that
demonized mode, and if so print no progress.
See [2] and subsequent replies for a discussion of an approach not
taken in compute_generation_numbers(). I.e. we're saying "Computing
commit graph generation numbers", even though on an established
history we're mostly skipping over all the work we did in the
past. This is similar to the white lie we tell in the "Writing
objects" phase (not all are objects being written).
Always showing progress is considered more important than
accuracy. I.e. on a repository like 2015-04-03-1M-git.git we'd hang
for 6 seconds with no output on the second "git gc" if no changes were
made to any objects in the interim if we'd take the approach in [2].
1. https://github.com/avar/2015-04-03-1M-git
2. <c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com>
(https://public-inbox.org/git/c6960252-c095-fb2b-e0bc-b1e6bb261614@gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many places in the codebase that want to iterate over
all packfiles known to Git. The purposes are wide-ranging, and
those that can take advantage of the multi-pack-index already
do. So, use get_all_packs() instead of get_packed_git() to be
sure we are iterating over all packfiles.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc --auto" opens file descriptors for the packfiles before
spawning "git repack/prune", which would upset Windows that does
not want a process to work on a file that is open by another
process. The issue has been worked around.
* kg/gc-auto-windows-workaround:
gc --auto: release pack files before auto packing
Some build machines started consistently failing to fetch updated
source using "repo sync", with error
error: The last gc run reported the following. Please correct the root cause
and remove /build/.repo/projects/tools/git.git/gc.log.
Automatic cleanup will not be performed until the file is removed.
warning: There are too many unreachable loose objects; run 'git prune' to remove them.
The cause takes some time to describe.
In v2.0.0-rc0~145^2 (gc: config option for running --auto in
background, 2014-02-08), "git gc --auto" learned to run in the
background instead of blocking the invoking command. In this mode, it
closed stderr to avoid interleaving output with any subsequent
commands, causing warnings like the above to be swallowed; v2.6.3~24^2
(gc: save log from daemonized gc --auto and print it next time,
2015-09-19) addressed that by storing any diagnostic output in
.git/gc.log and allowing the next "git gc --auto" run to print it.
To avoid wasteful repeated fruitless gcs, when gc.log is present, the
subsequent "gc --auto" would die after printing its contents. Most
git commands, such as "git fetch", ignore the exit status from "git gc
--auto" so all is well at this point: the user gets to see the error
message, and the fetch succeeds, without a wasteful additional attempt
at an automatic gc.
External tools like repo[1], though, do care about the exit status
from "git gc --auto". In non-daemonized mode, the exit status is
straightforward: if there is an error, it is nonzero, but after a
warning like the above, the status is zero. The daemonized mode, as a
side effect of the other properties provided, offers a very strange
exit code convention:
- if no housekeeping was required, the exit status is 0
- the first real run, after forking into the background, returns exit
status 0 unconditionally. The parent process has no way to know
whether gc will succeed.
- if there is any diagnostic output in gc.log, subsequent runs return
a nonzero exit status to indicate that gc was not triggered.
There's nothing for the calling program to act on on the basis of that
error. Use status 0 consistently instead, to indicate that we decided
not to run a gc (just like if no housekeeping was required). This
way, repo and similar tools can get the benefit of the same behavior
as tools like "git fetch" that ignore the exit status from gc --auto.
Once the period of time described by gc.pruneExpire elapses, the
unreachable loose objects will be removed by "git gc --auto"
automatically.
[1] https://gerrit-review.googlesource.com/c/git-repo/+/10598/
Reported-by: Andrii Dehtiarov <adehtiarov@google.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A value of -1 returned from cmd_gc gets propagated to exit(),
resulting in an exit status of 255. Use die instead for a clearer
error message and a controlled exit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A collection of minor error handling fixes:
- use an error message in lower case, following the usual style
- quote filenames in error messages to make them easier to read and to
decrease translation load by matching other 'stat' error messages
- check for and report errors from 'read', too
- avoid being confused by a gc.log larger than INT_MAX bytes
Noticed by code inspection.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach gc --auto to release pack files before auto packing the repository
to prevent failures when removing them.
Also teach the test 'fetching with auto-gc does not lock up' to complain
when it is no longer triggering an auto packing of the repository.
Fixes https://github.com/git-for-windows/git/issues/500
Signed-off-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file is a very helpful feature for speeding up git
operations. In order to make it more useful, make it possible to
write the commit-graph file during standard garbage collection
operations.
Add a 'gc.commitGraph' config setting that triggers writing a
commit-graph file after any non-trivial 'git gc' command. Defaults to
false while the commit-graph feature matures. We specifically do not
want to have this on by default until the commit-graph feature is fully
integrated with history-modifying features like shallow clones.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
"git gc" in a large repository takes a lot of time as it considers
to repack all objects into one pack by default. The command has
been taught to pretend as if the largest existing packfile is
marked with ".keep" so that it is left untouched while objects in
other packs and loose ones are repacked.
* nd/repack-keep-pack:
pack-objects: show some progress when counting kept objects
gc --auto: exclude base pack if not enough mem to "repack -ad"
gc: handle a corner case in gc.bigPackThreshold
gc: add gc.bigPackThreshold config
gc: add --keep-largest-pack option
repack: add --keep-pack option
t7700: have closing quote of a test at the beginning of line
Placing `struct lock_file`s on the stack used to be a bad idea, because
the temp- and lockfile-machinery would keep a pointer into the struct.
But after 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05), we can safely have lockfiles on the stack. (This applies
even if a user returns early, leaving a locked lock behind.)
These `struct lock_file`s are local to their respective functions and we
can drop their staticness.
For good measure, I have inspected these sites and come to believe that
they always release the lock, with the possible exception of bailing out
using `die()` or `exit()` or by returning from a `cmd_foo()`.
As pointed out by Jeff King, it would be bad if someone held on to a
`struct lock_file *` for some reason. After some grepping, I agree with
his findings: no-one appears to be doing that.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc --prune=nonsense" spent long time repacking and then
silently failed when underlying "git prune --expire=nonsense"
failed to parse its command line. This has been corrected.
* jc/parseopt-expiry-errors:
parseopt: handle malformed --expire arguments more nicely
gc: do not upcase error message shown with die()
A few commands that parse --expire=<time> command line option behave
sillily when given nonsense input. For example
$ git prune --no-expire
Segmentation falut
$ git prune --expire=npw; echo $?
129
Both come from parse_opt_expiry_date_cb().
The former is because the function is not prepared to see arg==NULL
(for "--no-expire", it is a norm; "--expire" at the end of the
command line could be made to pass NULL, if it is told that the
argument is optional, but we don't so we do not have to worry about
that case).
The latter is because it does not check the value returned from the
underlying parse_expiry_date().
This seems to be a recent regression introduced while we attempted
to avoid spewing the entire usage message when given a correct
option but with an invalid value at 3bb0923f ("parse-options: do not
show usage upon invalid option value", 2018-03-22). Before that, we
didn't fail silently but showed a full usage help (which arguably is
not all that better).
Also catch this error early when "git gc --prune=<expiration>" is
misspelled by doing a dummy parsing before the main body of "gc"
that is time consuming even begins. Otherwise, we'd spend time to
pack objects and then later have "git prune" first notice the error.
Aborting "gc" in the middle that way is not harmful but is ugly and
can be avoided.
Helped-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects could be a big memory hog especially on large repos,
everybody knows that. The suggestion to stick a .keep file on the
giant base pack to avoid this problem is also known for a long time.
Recent patches add an option to do just this, but it has to be either
configured or activated manually. This patch lets `git gc --auto`
activate this mode automatically when it thinks `repack -ad` will use
a lot of memory and start affecting the system due to swapping or
flushing OS cache.
gc --auto decides to do this based on an estimation of pack-objects
memory usage, which is quite accurate at least for the heap part, and
whether that fits in half of system memory (the assumption here is for
desktop environment where there are many other applications running).
This mechanism only kicks in if gc.bigBasePackThreshold is not configured.
If it is, it is assumed that the user already knows what they want.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This config allows us to keep <N> packs back if their size is larger
than a limit. But if this N >= gc.autoPackLimit, we may have a
problem. We are supposed to reduce the number of packs after a
threshold because it affects performance.
We could tell the user that they have incompatible gc.bigPackThreshold
and gc.autoPackLimit, but it's kinda hard when 'git gc --auto' runs in
background. Instead let's fall back to the next best stategy: try to
reduce the number of packs anyway, but keep the base pack out. This
reduces the number of packs to two and hopefully won't take up too
much resources to repack (the assumption still is the base pack takes
most resources to handle).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --keep-largest-pack option is not very convenient to use because
you need to tell gc to do this explicitly (and probably on just a few
large repos).
Add a config key that enables this mode when packs larger than a limit
are found. Note that there's a slight behavior difference compared to
--keep-largest-pack: all packs larger than the threshold are kept, not
just the largest one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a new repack mode that combines everything into a secondary
pack, leaving the largest pack alone.
This could help reduce memory pressure. On linux-2.6.git, valgrind
massif reports 1.6GB heap in "pack all" case, and 535MB in "pack
all except the base pack" case. We save roughly 1GB memory by
excluding the base pack.
This should also lower I/O because we don't have to rewrite a giant
pack every time (e.g. for linux-2.6.git that's a 1.4GB pack file)..
PS. The use of string_list here seems overkill, but we'll need it in
the next patch...
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
The reason callers have to call this is to make sure either packed_git
or packed_git_mru pointers are initialized since we don't do that by
default. Sometimes it's hard to see this connection between where the
function is called and where packed_git pointer is used (sometimes in
separate functions).
Keep this dependency internal because now all access to packed_git and
packed_git_mru must go through get_xxx() wrappers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See previous patch for explanation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow prepare_packed_git callers to be
more specific about which repository to handle. See commit "sha1_file:
add repository argument to link_alt_odb_entry" for an explanation of
the #define trick.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a process with multiple repositories open, packfile accessors
should be associated to a single repository and not shared globally.
Move packed_git and packed_git_mru into the_repository and adjust
callers to reflect this.
[nd: while at there, wrap access to these two fields in get_packed_git()
and get_packed_git_mru(). This allows us to lazily initialize these
fields without caller doing that explicitly]
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach parse-options API an option to help the completion script,
and make use of the mechanism in command line completion.
* nd/parseopt-completion: (45 commits)
completion: more subcommands in _git_notes()
completion: complete --{reuse,reedit}-message= for all notes subcmds
completion: simplify _git_notes
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
completion: use __gitcomp_builtin in _git_worktree
completion: use __gitcomp_builtin in _git_tag
completion: use __gitcomp_builtin in _git_status
completion: use __gitcomp_builtin in _git_show_branch
completion: use __gitcomp_builtin in _git_rm
completion: use __gitcomp_builtin in _git_revert
completion: use __gitcomp_builtin in _git_reset
completion: use __gitcomp_builtin in _git_replace
remote: force completing --mirror= instead of --mirror
completion: use __gitcomp_builtin in _git_remote
completion: use __gitcomp_builtin in _git_push
completion: use __gitcomp_builtin in _git_pull
completion: use __gitcomp_builtin in _git_notes
completion: use __gitcomp_builtin in _git_name_rev
completion: use __gitcomp_builtin in _git_mv
completion: use __gitcomp_builtin in _git_merge_base
...
Teach gc to stop traversal at promisor objects, and to leave promisor
packfiles alone. This has the effect of only repacking non-promisor
packfiles, and preserves the distinction between promisor packfiles and
non-promisor packfiles.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" tries to avoid running two instances at the same time by
reading and writing pid/host from and to a lock file; it used to
use an incorrect fscanf() format when reading, which has been
corrected.
* aw/gc-lockfile-fscanf-fix:
gc: call fscanf() with %<len>s, not %<len>c, when reading hostname
Earlier in this codepath, we (ab)used "%<len>c" to read the hostname
recorded in the lockfile into locking_host[HOST_NAME_MAX + 1] while
substituting <len> with the actual value of HOST_NAME_MAX.
This turns out to be incorrect, as it is an instruction to read
exactly the specified number of bytes. Because we are trying to
read at most that many bytes, we should be using "%<len>s" instead.
Helped-by: A. Wilcox <awilfox@adelielinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit taught the tempfile code to give up
ownership over tempfiles that have been renamed or deleted.
That makes it possible to use a stack variable like this:
struct tempfile t;
create_tempfile(&t, ...);
...
if (!err)
rename_tempfile(&t, ...);
else
delete_tempfile(&t);
But doing it this way has a high potential for creating
memory errors. The tempfile we pass to create_tempfile()
ends up on a global linked list, and it's not safe for it to
go out of scope until we've called one of those two
deactivation functions.
Imagine that we add an early return from the function that
forgets to call delete_tempfile(). With a static or heap
tempfile variable, the worst case is that the tempfile hangs
around until the program exits (and some functions like
setup_shallow_temporary rely on this intentionally, creating
a tempfile and then leaving it for later cleanup).
But with a stack variable as above, this is a serious memory
error: the variable goes out of scope and may be filled with
garbage by the time the tempfile code looks at it. Let's
see if we can make it harder to get this wrong.
Since many callers need to allocate arbitrary numbers of
tempfiles, we can't rely on static storage as a general
solution. So we need to turn to the heap. We could just ask
all callers to pass us a heap variable, but that puts the
burden on them to call free() at the right time.
Instead, let's have the tempfile code handle the heap
allocation _and_ the deallocation (when the tempfile is
deactivated and removed from the list).
This changes the return value of all of the creation
functions. For the cleanup functions (delete and rename),
we'll add one extra bit of safety: instead of taking a
tempfile pointer, we'll take a pointer-to-pointer and set it
to NULL after freeing the object. This makes it safe to
double-call functions like delete_tempfile(), as the second
call treats the NULL input as a noop. Several callsites
follow this pattern.
The resulting patch does have a fair bit of noise, as each
caller needs to be converted to handle:
1. Storing a pointer instead of the struct itself.
2. Passing the pointer instead of taking the struct
address.
3. Handling a "struct tempfile *" return instead of a file
descriptor.
We could play games to make this less noisy. For example, by
defining the tempfile like this:
struct tempfile {
struct heap_allocated_part_of_tempfile {
int fd;
...etc
} *actual_data;
}
Callers would continue to have a "struct tempfile", and it
would be "active" only when the inner pointer was non-NULL.
But that just makes things more awkward in the long run.
There aren't that many callers, so we can simply bite
the bullet and adjust all of them. And the compiler makes it
easy for us to find them all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
We normally try to avoid having two auto-gc operations run
at the same time, because it wastes resources. This was done
long ago in 64a99eb47 (gc: reject if another gc is running,
unless --force is given, 2013-08-08).
When we do a detached auto-gc, we run the ref-related
commands _before_ detaching, to avoid confusing lock
contention. This was done by 62aad1849 (gc --auto: do not
lock refs in the background, 2014-05-25).
These two features do not interact well. The pre-detach
operations are run before we check the gc.pid lock, meaning
that on a busy repository we may run many of them
concurrently. Ideally we'd take the lock before spawning any
operations, and hold it for the duration of the program.
This is tricky, though, with the way the pid-file interacts
with the daemonize() process. Other processes will check
that the pid recorded in the pid-file still exists. But
detaching causes us to fork and continue running under a
new pid. So if we take the lock before detaching, the
pid-file will have a bogus pid in it. We'd have to go back
and update it with the new pid after detaching. We'd also
have to play some tricks with the tempfile subsystem to
tweak the "owner" field, so that the parent process does not
clean it up on exit, but the child process does.
Instead, we can do something a bit simpler: take the lock
only for the duration of the pre-detach work, then detach,
then take it again for the post-detach work. Technically,
this means that the post-detach lock could lose to another
process doing pre-detach work. But in the long run this
works out.
That second process would then follow-up by doing
post-detach work. Unless it was in turn blocked by a third
process doing pre-detach work, and so on. This could in
theory go on indefinitely, as the pre-detach work does not
repack, and so need_to_gc() will continue to trigger. But
in each round we are racing between the pre- and post-detach
locks. Eventually, one of the post-detach locks will win the
race and complete the full gc. So in the worst case, we may
racily repeat the pre-detach work, but we would never do so
simultaneously (it would happen via a sequence of serialized
race-wins).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert code that divides and rounds up to use DIV_ROUND_UP to make the
intent clearer and reduce the number of magic constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
