"git symbolic-ref -d HEAD" happily removes the symbolic ref, but
the resulting repository becomes an invalid one. Teach the command
to forbid removal of HEAD.
* jc/forbid-symbolic-ref-d-HEAD:
symbolic-ref -d: do not allow removal of HEAD
If you delete the symbolic-ref HEAD from a repository, Git no longer
considers the repository valid, and even "git symbolic-ref HEAD
refs/heads/master" would not be able to recover from that state
(although "git init" can, but that is a sure sign that you are
talking about a "broken" repository).
In the spirit similar to afe5d3d5 ("symbolic ref: refuse non-ref
targets in HEAD", 2009-01-29), forbid removal of HEAD to avoid
corrupting a repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3b75ee9 ("blame: allow to blame paths freshly added to the index",
2016-07-16) git blame also looks at the index to determine if there is a
file that was freshly added to the index.
cache_name_pos returns -pos - 1 in case there is no match is found, or
if the name matches, but the entry has a stage other than 0. As git
blame should work for unmerged files, it uses strcmp to determine
whether the name of the returned position matches, in which case the
file exists, but is merely unmerged, or if the file actually doesn't
exist in the index.
If the repository is empty, or if the file would lexicographically be
sorted as the last file in the repository, -cache_name_pos - 1 is
outside of the length of the active_cache array, causing git blame to
segfault. Guard against that, and die() normally to restore the old
behaviour.
Reported-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, help.browser configuration variable used to be ignored,
which has been corrected.
* js/no-html-bypass-on-windows:
Revert "display HTML in default browser using Windows' shell API"
"git checkout --detach <branch>" used to give the same advice
message as that is issued when "git checkout <tag>" (or anything
that is not a branch name) is given, but asking with "--detach" is
an explicit enough sign that the user knows what is going on. The
advice message has been squelched in this case.
* sb/checkout-explit-detach-no-advice:
checkout: do not mention detach advice for explicit --detach option
Since 4804aab (help (Windows): Display HTML in default browser using
Windows' shell API, 2008-07-13), Git for Windows used to call
`ShellExecute()` to launch the default Windows handler for `.html`
files.
The idea was to avoid going through a shell script, for performance
reasons.
However, this change ignores the `help.browser` config setting. Together
with browsing help not being a performance-critical operation, let's
just revert that patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user asked for a detached HEAD specifically with `--detach`,
we do not need to give advice on what a detached HEAD state entails as
we can assume they know what they're getting into as they asked for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro FLEX_ALLOC_MEM instead of open-coding it. This shortens
and simplifies the code a bit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase" tries to compare set of changes on the updated
upstream and our own branch, it computes patch-id for all of these
changes and attempts to find matches. This has been optimized by
lazily computing the full patch-id (which is expensive) to be
compared only for changes that touch the same set of paths.
* kw/patch-ids-optim:
rebase: avoid computing unnecessary patch IDs
patch-ids: add flag to create the diff patch id using header only data
patch-ids: replace the seen indicator with a commit pointer
patch-ids: stop using a hand-rolled hashmap implementation
"git mv dir non-existing-dir/" did not work in some environments
the same way as existing mainstream platforms. The code now moves
"dir" to "non-existing-dir", without relying on rename("A", "B/")
that strips the trailing slash of '/'.
* js/mv-dir-to-new-directory:
git mv: do not keep slash in `git mv dir non-existing-dir/`
Not-so-recent rewrite of "git am" that started making internal
calls into the commit machinery had an unintended regression, in
that no matter how many seconds it took to apply many patches, the
resulting committer timestamp for the resulting commits were all
the same.
* jk/reset-ident-time-per-commit:
am: reset cached ident date for each patch
The `rebase` family of Git commands avoid applying patches that were
already integrated upstream. They do that by using the revision walking
option that computes the patch IDs of the two sides of the rebase
(local-only patches vs upstream-only ones) and skipping those local
patches whose patch ID matches one of the upstream ones.
In many cases, this causes unnecessary churn, as already the set of
paths touched by a given commit would suffice to determine that an
upstream patch has no local equivalent.
This hurts performance in particular when there are a lot of upstream
patches, and/or large ones.
Therefore, let's introduce the concept of a "diff-header-only" patch ID,
compare those first, and only evaluate the "full" patch ID lazily.
Please note that in contrast to the "full" patch IDs, those
"diff-header-only" patch IDs are prone to collide with one another, as
adjacent commits frequently touch the very same files. Hence we now
have to be careful to allow multiple hash entries with the same hash.
We accomplish that by using the hashmap_add() function that does not even
test for hash collisions. This also allows us to evaluate the full patch ID
lazily, i.e. only when we found commits with matching diff-header-only
patch IDs.
We add a performance test that demonstrates ~1-6% improvement. In
practice this will depend on various factors such as how many upstream
changes and how big those changes are along with whether file system
caches are cold or warm. As Git's test suite has no way of catching
performance regressions, we also add a regression test that verifies
that the full patch ID computation is skipped when the diff-header-only
computation suffices.
Signed-off-by: Kevin Willford <kcwillford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few updates to "git submodule update".
Use of "| wc -l" break with BSD variant of 'wc'.
* sb/submodule-update-dot-branch:
t7406: fix breakage on OSX
submodule update: allow '.' for branch value
submodule--helper: add remote-branch helper
submodule-config: keep configured branch around
submodule--helper: fix usage string for relative-path
submodule update: narrow scope of local variable
submodule update: respect depth in subsequent fetches
t7406: future proof tests with hard coded depth
"git am -3" calls "git merge-recursive" when it needs to fall back
to a three-way merge; this call has been turned into an internal
subroutine call instead of spawning a separate subprocess.
* js/am-3-merge-recursive-direct:
merge-recursive: flush output buffer even when erroring out
merge_trees(): ensure that the callers release output buffer
merge-recursive: offer an option to retain the output in 'obuf'
merge-recursive: write the commit title in one go
merge-recursive: flush output buffer before printing error messages
am -3: use merge_recursive() directly again
merge-recursive: switch to returning errors instead of dying
merge-recursive: handle return values indicating errors
merge-recursive: allow write_tree_from_memory() to error out
merge-recursive: avoid returning a wholesale struct
merge_recursive: abort properly upon errors
prepare the builtins for a libified merge_recursive()
merge-recursive: clarify code in was_tracked()
die(_("BUG")): avoid translating bug messages
die("bug"): report bugs consistently
t5520: verify that `pull --rebase` shows the helpful advice when failing
"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.
* jt/format-patch-from-config:
format-patch: format.from gives the default for --from
Not-so-recent rewrite of "git am" that started making internal
calls into the commit machinery had an unintended regression, in
that no matter how many seconds it took to apply many patches, the
resulting committer timestamp for the resulting commits were all
the same.
* jk/reset-ident-time-per-commit:
am: reset cached ident date for each patch
"git commit --help" said "--no-verify" is only about skipping the
pre-commit hook, and failed to say that it also skipped the
commit-msg hook.
* os/no-verify-skips-commit-msg-too:
commit: describe that --no-verify skips the commit-msg hook in the help text
The use of strbuf in "git rm" to build filename to remove was a bit
suboptimal, which has been fixed.
* rs/rm-strbuf-optim:
rm: reuse strbuf for all remove_dir_recursively() calls
Users of the parse_options_concat() API function need to allocate
extra slots in advance and fill them with OPT_END() when they want
to decide the set of supported options dynamically, which makes the
code error-prone and hard to read. This has been corrected by tweaking
the API to allocate and return a new copy of "struct option" array.
* jk/parse-options-concat:
parse_options: allocate a new array when concatenating
When developing another patch series I had a temporary state in
which git-clone would segfault, when the call was prepared in
prepare_to_clone_next_submodule. This lead to the call failing,
i.e. in `update_clone_task_finished` the task was scheduled to be
tried again. The second call to prepare_to_clone_next_submodule
would return 0, as the segfaulted clone did create the .git file
already, such that was not considered to need to be cloned again. I
was seeing the "BUG: ce was a submodule before?\n" message, which
was the correct behavior at the time as my local code was
buggy. When trying to debug this failure, I tried to use printing
messages into the strbuf that is passed around, but these messages
were never printed as the die(..) doesn't flush the `err` strbuf.
When implementing the die() in 665b35ecc (2016-06-09, "submodule--helper:
initial clone learns retry logic"), I considered this condition to be
a severe condition, which should lead to an immediate abort as we do not
trust ourselves any more. However the queued messages in `err` are valuable
so let's not toss them out by immediately dying, but a graceful return.
Another thing to note: The error message itself was misleading. A return
value of 0 doesn't indicate the passed in `ce` is not a submodule any more,
but just that we do not consider cloning it any more.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Repeating the definition of a static variable seems to be valid in C.
Nevertheless, it is bad style because it can cause confusion, definitely
when it becomes necessary to change the type.
d64ec16 (git config: reorganize to use parseopt, 2009-02-21) added two
static variables near the top of the file config.c without removing the
definitions of the two variables that occurs later in the file.
The two variables were needed earlier in the file in the newly
introduced parseopt structure. These references were removed later in
d0e08d6 (config: fix parsing of "git config --get-color some.key -1",
2014-11-20).
Remove the redundant, younger, definitions near the top of the file and
keep the original definitions that occur later.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" has a few options that tell it not to pack
objects found in certain packfiles, which require it to scan .idx
files of all available packs. The codepaths involved in these
operations have been optimized for a common case of not having any
non-local pack and/or any .kept pack.
* jk/pack-objects-optim:
pack-objects: compute local/ignore_pack_keep early
pack-objects: break out of want_object loop early
find_pack_entry: replace last_found_pack with MRU cache
add generic most-recently-used list
sha1_file: drop free_pack_by_name
t/perf: add tests for many-pack scenarios
The reflog output format is documented better, and a new format
--date=unix to report the seconds-since-epoch (without timezone)
has been added.
* jk/reflog-date:
date: clarify --date=raw description
date: add "unix" format
date: document and test "raw-local" mode
doc/pretty-formats: explain shortening of %gd
doc/pretty-formats: describe index/time formats for %gd
doc/rev-list-options: explain "-g" output formats
doc/rev-list-options: clarify "commit@{Nth}" for "-g" option
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
"git blame file" allowed the lineage of lines in the uncommitted,
unadded contents of "file" to be inspected, but it refused when
"file" did not appear in the current commit. When "file" was
created by renaming an existing file (but the change has not been
committed), this restriction was unnecessarily tight.
* mh/blame-worktree:
t/t8003-blame-corner-cases.sh: Use here documents
blame: allow to blame paths freshly added to the index
When calling `rename("dir", "non-existing-dir/")` on Linux, it silently
succeeds, stripping the trailing slash of the second argument.
This is all good and dandy but this behavior disagrees with the specs at
http://pubs.opengroup.org/onlinepubs/9699919799/functions/rename.html
that state clearly regarding the 2nd parameter (called `new`):
If the `new` argument does not resolve to an existing directory
entry for a file of type directory and the `new` argument
contains at least one non- <slash> character and ends with one
or more trailing <slash> characters after all symbolic links
have been processed, `rename()` shall fail.
Of course, we would like `git mv dir non-existing-dir/` to succeed (and
rename the directory "dir" to "non-existing-dir"). Let's be extra
careful to remove the trailing slash in that case.
This lets t7001-mv.sh pass in Bash on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call string_list_split() for cutting a space separated list into pieces
instead of reimplementing it based on struct strategy. The attr member
of struct strategy was not used split_merge_strategies(); it was a pure
string operation. Also be nice and clean up once we're done splitting;
the old code didn't bother freeing any of the allocated memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initialize struct child_process variables already when they're defined.
That's shorter and saves a function call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_addstr() for adding a simple string to a strbuf instead of
using the heavier strbuf_addf(). This is shorter and documents the
intent more clearly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier tweak to make "submodule update" retry a failing clone
of submodules was buggy and caused segfault, which has been fixed.
* sb/submodule-clone-retry:
submodule-helper: fix indexing in clone retry error reporting path
git-submodule: forward exit code of git-submodule--helper more faithfully
Gerrit has a "superproject subscription" feature[1], that triggers a
commit in a superproject that is subscribed to its submodules.
Conceptually this Gerrit feature can be done on the client side with
Git via (except for raciness, error handling etc):
while [ true ]; do
git -C <superproject> submodule update --remote --force
git -C <superproject> commit -a -m "Update submodules"
git -C <superproject> push
done
for each branch in the superproject. To ease the configuration in Gerrit
a special value of "." has been introduced for the submodule.<name>.branch
to mean the same branch as the superproject[2], such that you can create a
new branch on both superproject and the submodule and this feature
continues to work on that new branch.
Now we find projects in the wild with such a .gitmodules file.
The .gitmodules used in these Gerrit projects do not conform
to Gits understanding of how .gitmodules should look like.
This teaches Git to deal gracefully with this syntax as well.
The redefinition of "." does no harm to existing projects unaware of
this change, as "." is an invalid branch name in Git, so we do not
expect such projects to exist.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we want to enhance the logic for the branch selection.
Rewrite the current logic to be in C, so we can directly use C when
we enhance the logic.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push" and "git clone" learned to give better progress meters
to the end user who is waiting on the terminal.
* jk/push-progress:
receive-pack: send keepalives during quiet periods
receive-pack: turn on connectivity progress
receive-pack: relay connectivity errors to sideband
receive-pack: turn on index-pack resolving progress
index-pack: add flag for showing delta-resolution progress
clone: use a real progress meter for connectivity check
check_connected: add progress flag
check_connected: relay errors to alternate descriptor
check_everything_connected: use a struct with named options
check_everything_connected: convert to argv_array
rev-list: add optional progress reporting
check_everything_connected: always pass --quiet to rev-list
Users of the parse_options_concat() API function need to allocate
extra slots in advance and fill them with OPT_END() when they want
to decide the set of supported options dynamically, which makes the
code error-prone and hard to read. This has been corrected by tweaking
the API to allocate and return a new copy of "struct option" array.
* jk/parse-options-concat:
parse_options: allocate a new array when concatenating
"git push" learned to accept and pass extra options to the
receiving end so that hooks can read and react to them.
* sb/push-options:
add a test for push options
push: accept push options
receive-pack: implement advertising and receiving push options
push options: {pre,post}-receive hook learns about push options
"git commit --help" said "--no-verify" is only about skipping the
pre-commit hook, and failed to say that it also skipped the
commit-msg hook.
* os/no-verify-skips-commit-msg-too:
commit: describe that --no-verify skips the commit-msg hook in the help text
This strdup was added as part of 58dbfa2 (blame: accept
multiple -L ranges, 2013-08-06) to be consistent with
parse_opt_string_list(), which appends to the same list.
But as of 7a7a517 (parse_opt_string_list: stop allocating
new strings, 2016-06-13), we should stop using strdup (to
match parse_opt_string_list, and for all the reasons
described in that commit; namely that it does nothing useful
and causes us to leak the memory).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>