In 41cb7488 Linus moved this function to connect.c for reuse inside
of the git-clone-pack command. That was 2005, but in 2006 Junio
retired git-clone-pack in commit efc7fa53. Since then the only
caller has been fetch-pack. Since this ACK/NAK exchange is only
used by the fetch-pack/upload-pack protocol we should move it back
to be a private detail of fetch-pack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is being offered as a refactoring to make later
commits in the smart HTTP series easier.
By changing the enabled capabilities to be formatted in a strbuf
it is easier to add a new capability to the set of supported
capabilities.
By formatting the want portion of the request into a strbuf and
writing it as a whole block we can later decide to hold onto
the req_buf (instead of releasing it) to recycle in stateless
communications.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is an error parsing the 4 byte length component we now
display it as part of the die message, this may hint as to what
data was misunderstood by the application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These routines help to work with pkt-line values inside of a strbuf,
permitting simple formatting of buffered network messages.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that http.c::finish_http_pack_request() returns 0 (for success).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some types of corruption to a pack may confuse the deflate stream
which stores an object. In Andy's reported case a 36 byte region
of the pack was overwritten, leading to what appeared to be a valid
deflate stream that was trying to produce a result larger than our
allocated output buffer could accept.
Z_BUF_ERROR is returned from inflate() if either the input buffer
needs more input bytes, or the output buffer has run out of space.
Previously we only considered the former case, as it meant we needed
to move the stream's input buffer to the next window in the pack.
We now abort the loop if inflate() returns Z_BUF_ERROR without
consuming the entire input buffer it was given, or has filled
the entire output buffer but has not yet returned Z_STREAM_END.
Either state is a clear indicator that this loop is not working
as expected, and should not continue.
This problem cannot occur with loose objects as we open the entire
loose object as a single buffer and treat Z_BUF_ERROR as an error.
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
change throughput display units with fast links
clone: Supply the right commit hash to post-checkout when -b is used
remote-curl: add missing initialization of argv0_path
Switch to MiB/s when the connection is fast enough (i.e. on a LAN).
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -b <branch>, we may checkout something else than what the
remote's HEAD references, but we still used remote_head to supply the
new ref value to the post-checkout hook, which is wrong.
So instead of using remote_head to find the value to be passed to the
post-checkout hook, we have to use our_head_points_at, which is always
correctly setup, even if -b is not used.
This also fixes a segfault when "clone -b <branch>" is used with a
remote repo that doesn't have a valid HEAD, as in such a case
remote_head is NULL, but we still tried to access it.
Reported-by: Devin Cofer <ranguvar@archlinux.us>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All programs, in particular also the stand-alone programs (non-builtins)
must call git_extract_argv0_path(argv[0]) in order to help builds that
derive the installation prefix at runtime, such as the MinGW build.
Without this call, the program segfaults (or raises an assertion
failure).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Tested-by: Michael Wookey <michaelwookey@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --graph --oneline --decorate --all' is a useful way to get a
general overview of the repository state, similar to 'gitk --all'.
Let it indicate the position of HEAD by loading that ref too, so that
the --decorate code can see it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the --, always attempt ref completion. This helps with
entering the <treeish> arguments to git-grep. As a bonus, you can
work around git-grep's current lack of --all by hitting M-*, ugly as
the resulting command line may be.
Strictly speaking, completing the regular expression argument (or
option argument) makes no sense. However, we cannot prevent _all_
completion (it will fall back to filenames), so we dispense with any
additional complication to detect whether the user still has to enter
a regular expression.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git add -p" to not skip files that are in index even if they are
excluded (by .gitignore etc.). This fixes the contradictory behavior
that "git status" and "git commit -a" listed such files as modified, but
"git add -p FILENAME" ignored them.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When saying the initial branch is equal to the currently active
remote branch, it is probably intended that the branch heads
point to the same commit. Maybe it would be more useful to a
new user to emphasize that the tree contents and history are the
same.
More important, probably, is that this new branch is set up so
that "git pull" merges changes from the corresponding remote
branch. The next paragraph addresses that directly. What the
reader needs to know to begin with is that (1) the initial branch
is your own; if you do not pull, it won't get updated, and that
(2) the initial branch starts out at the same commit as the
upstream.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases with newlines have been a problem since commit 56fc25f (Bash
completion support for remotes in .git/config., 2006-11-05). The chance
of the problem occurring has been slim at best, until commit 518ef8f
(completion: Replace config --list with --get-regexp, 2009-09-11)
removed the case statement introduced by commit 56fc25f. Before removing
the case statement, most aliases with newlines would work unless they
were specially crafted as follows
[alias]
foo = "log -1 --pretty='format:%s\nalias.error=broken'"
After removing the case statement, a more benign alias like
[alias]
whowhat = "log -1 --pretty='format:%an <%ae>\n%s'"
wont-complete = ...
would cause the completion to break badly.
For now, revert the removal of the case statement until someone comes up
with a better way to get keys from git-config.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 511a3fc (wrap git's main usage string., 2009-09-12), the
bash completion for git commands includes COMMAND and [ARGS] when it
shouldn't. Fix this by grepping more strictly for a line with git
commands. It's doubtful whether git will ever have commands starting
with anything besides numbers and letters so this should be fine. At
least by being stricter we'll know when we break the completion earlier.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an obvious syntax error that snuck in commit 7e787953:
syntax error at /home/ingmar/bin//git-import-tars line 143, near "/^$/ { "
syntax error at /home/ingmar/bin//git-import-tars line 145, near "} else"
syntax error at /home/ingmar/bin//git-import-tars line 152, near "}"
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org>
Acked-and-Tested-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Idealists may want USE_NSEC to be the default on Linux some day.
Point to a patch to better explain the requirements on
filesystem code for that to happen.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not necessarily obvious to a git novice what it means for a
filesystem tree to be equal to the HEAD. Spell it out.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation seems to assume that the starting point for a new
branch is the tip of an existing (ordinary) branch, but that is not
the most common case. More often, "git branch" is used to begin
a branch from a remote-tracking branch, a tag, or an interesting
commit (e.g. origin/pu^2). Clarify the language so it can apply
to these cases. Thanks to Sean Estabrooks for the wording.
Also add a pointer to the user's manual for the bewildered.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation for --merged and --no-merged to explain
the meaning of the optional parameter introduced in commit 049716b
(branch --merged/--no-merged: allow specifying arbitrary commit,
2008-07-08).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sounds better this way, at least to my ears. ("The syntax and
supported options of git merge" is a plural noun. "the same"
instead of "equal" sounds less technical and seems to convey
the meaning better here.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fmt-merge-message builtin can be invoked as "git fmt-merge-msg" rather
than through the hard link in GIT_EXEC_PATH. Although this is unlikely to
confuse most script writers, it should not hurt to make the documentation
a little clearer anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is excellent documentation for these options in
Documentation/Makefile, but some users may never find it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several reasons a git-pull invocation might not
have anything marked for merge:
1. We're not on a branch, so there is no branch
configuration.
2. We're on a branch, but there is no configuration for
this branch.
3. We fetched from the configured remote, but the
configured branch to merge didn't get fetched (either
it doesn't exist, or wasn't part of the fetch refspec).
4. We fetched from the non-default remote, but didn't
specify a branch to merge. We can't use the configured
one because it applies to the default remote.
5. We fetched from a specified remote, and a refspec was
given, but it ended up not fetching anything (this is
actually hard to do; if the refspec points to a remote
branch and it doesn't exist, then fetch will fail and
we never make it to this code path. But if you provide
a wildcard refspec like
refs/bogus/*:refs/remotes/origin/*
then you can see this failure).
We have handled (1) and (2) for some time. Recently, commit
a6dbf88 added code to handle case (3).
This patch handles cases (4) and (5), which previously just
fell under other cases, producing a confusing message.
While we're at it, let's rewrap the text for case (3), which
looks terribly ugly as it is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After doing a rebase, git-svn checks that the SVN URL
is what it expects. However, it does not account for
rewriteRoot, which is a legitimate way for the URL
to change. This produces a lot of spurious errors.
[ew: fixed line wrapping]
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When git is compiled with the MIPSpro 7.4.4m compiler, and NO_PTHREADS is
set, and NO_MMAP is _not_ set, then git segfaults when trying to access the
first entry in a reflog. If NO_PTHREADS is not set (which implies that the
pthread library is linked in), or NO_MMAP _is_ set, then the segfault is
not encountered. The conservative choice has been made to set NO_MMAP in
the Makefile to avoid this flaw. The GNU C compiler does not produce this
behavior.
The segfault happens in refs.c:read_ref_at(). The mmap succeeds, and the
loop is executed properly until rec is rewound into the first line (reflog
entry) of the file. The segfault is caught by test 28 of
t1400-update-ref.sh which fails when 'git rev-parse --verify "master@{May 25
2005}"' is called.
So, add a comment in the Makefile to describe why NO_MMAP is set and as a
hint to those who may be interested in unsetting it.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ls-files was called with -i but no exclude pattern, it was
calling fprintf(stderr, "...", NULL) and then exiting. On Solaris,
passing NULL into fprintf was causing a segfault. On glibc systems,
it was simply producing incorrect output (eg: "(null)": ...). The
NULL pointer was a result of argv[0] not being preserved by the option
parser. Instead of requesting that the option parser preserve
argv[0], use die() with a constant string.
A trigger for this bug was: `git ls-files -i`
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit dcda3614 removed the use of a variable length array from
builtin-pack-objects.c, it is now safe to compile with the threaded delta
search feature enabled. Formerly, the MIPSpro 7.4.4m compiler warned that
variable length arrays should not be used with pthreads.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During an MSVC build on cygwin, the make program did not notice
when the compiler or linker exited with an error. This was caused
by the scripts exiting with the value returned by system() directly.
On POSIX-like systems, such as cygwin, the return value of system()
has the exit code of the executed command encoded in the first byte
(ie the value is shifted up by 8 bits). This allows the bottom
7 bits to contain the signal number of a terminated process, while
the eighth bit indicates whether a core-dump was produced. (A value
of -1 indicates that the command failed to execute.)
The make program, however, expects the exit code to be encoded in the
bottom byte. Futhermore, it apparently masks off and ignores anything
in the upper bytes.
However, these scripts are (naturally) intended to be used on the
windows platform, where we can not assume POSIX-like semantics from
a perl implementation (eg ActiveState). So, in general, we can not
assume that shifting the return value right by eight will get us
the exit code.
In order to improve portability, we assume that a zero return from
system() indicates success, whereas anything else indicates failure.
Since we don't need to know the exact exit code from the compiler
or linker, we simply exit with 0 (success) or 1 (failure).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the MSVC section of the Makefile, BASIC_CFLAGS is set to a
value which contains the string "-DWIN32-D_CONSOLE". This results
in a (single) malformed -Define being passed to the compiler.
At least on my cygwin installation, the msvc compiler seems to
ignore this parameter, without issuing an error or warning, and
results in the WIN32 and _CONSOLE macros being undefined. This
breaks the build.
In order to fix the build, we simply insert a space between the
two -Define parameters, "-DWIN32" and "-D_CONSOLE", as originally
intended.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
