"git clone --local" stops copying from an original repository that
has symbolic links inside its $GIT_DIR; an error message when that
happens has been updated.
* gc/better-error-when-local-clone-fails-with-symlink:
clone: error specifically with --local and symlinked objects
Code clean-up to replace a hardcoded constant with a CPP macro.
* rs/get-tar-commit-id-use-defined-const:
get-tar-commit-id: use TYPEFLAG_GLOBAL_HEADER instead of magic value
Back in 5b92477f89 (builtin/gc.c: conditionally avoid pruning objects
via loose, 2022-05-20), `git gc` learned the `--cruft` option and
`gc.cruftPacks` configuration to opt-in to writing cruft packs when
collecting or pruning unreachable objects.
Cruft packs were introduced with the merge in a50036da1a (Merge branch
'tb/cruft-packs', 2022-06-03). They address the problem of "loose object
explosions", where Git will write out many individual loose objects when
there is a large number of unreachable objects that have not yet aged
past `--prune=<date>`.
Instead of keeping track of those unreachable yet recent objects via
their loose object file's mtime, cruft packs collect all unreachable
objects into a single pack with a corresponding `*.mtimes` file that
acts as a table to store the mtimes of all unreachable objects. This
prevents the need to store unreachable objects as loose as they age out
of the repository, and avoids the problem of loose object explosions.
Beyond avoiding loose object explosions, cruft packs also act as a more
efficient mechanism to store unreachable objects as they age out of a
repository. This is because pairs of similar unreachable objects serve
as delta bases for one another.
In 5b92477f89, the feature was introduced as experimental. Since then,
GitHub has been running these patches in every repository generating
hundreds of millions of cruft packs along the way. The feature is
battle-tested, and avoids many pathological cases such as above. Users
who either run `git gc` manually, or via `git maintenance` can benefit
from having cruft packs.
As such, enable cruft pack generation to take place by default (by
making `gc.cruftPacks` have the default of "true" rather than "false).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cruft packs were implemented, we never adjusted the code for `git
gc`'s `--keep-largest-pack` and `gc.bigPackThreshold` to ignore cruft
packs. This option and configuration option share a common
implementation, but including cruft packs is wrong in both cases:
- Running `git gc --keep-largest-pack` in a repository where the
largest pack is the cruft pack itself will make it impossible for
`git gc` to prune objects, since the cruft pack itself is kept.
- The same is true for `gc.bigPackThreshold`, if the size of the cruft
pack exceeds the limit set by the caller.
In the future, it is possible that `gc.bigPackThreshold` could be used
to write a separate cruft pack containing any new unreachable objects
that entered the repository since the last time a cruft pack was
written.
There are some complexities to doing so, mainly around handling
pruning objects that are in an existing cruft pack that is above the
threshold (which would either need to be rewritten, or else delay
pruning). Rewriting a substantially similar cruft pack isn't ideal, but
it is significantly better than the status-quo.
If users have large cruft packs that they don't want to rewrite, they
can mark them as `*.keep` packs. But in general, if a repository has a
cruft pack that is so large it is slowing down GC's, it should probably
be pruned anyway.
In the meantime, ignore cruft packs in the common implementation for
both of these options, and add a pair of tests to prevent any future
regressions here.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cruft packs were originally being developed, `-C` was designated as
the short-form for `--cruft` (as in `git repack -C`).
This was dropped due to confusion with Git's top-level `-C` option
before submitting to the list. But the reference to it in
`--cruft-expiration`'s help text was never updated. Fix that dangling
reference in this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean-up of the code path that deals with merge strategy option
handling in "git rebase".
* pw/rebase-cleanup-merge-strategy-option-handling:
rebase: remove a couple of redundant strategy tests
rebase -m: fix serialization of strategy options
rebase -m: cleanup --strategy-option handling
sequencer: use struct strvec to store merge strategy options
rebase: stop reading and writing unnecessary strategy state
"git branch -d origin/master" would say "no such branch", but it is
likely a missed "-r" if refs/remotes/origin/master exists. The
command has been taught to give such a hint in its error message.
* cm/branch-delete-error-message-update:
branch: improve error log on branch not found by checking remotes refs
"git mergetool" and "git difftool" learns a new configuration
guiDefault to optionally favor configured guitool over non-gui-tool
automatically when $DISPLAY is set.
* tk/mergetool-gui-default-config:
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY
While parsing a .rev file, we check the header information to be sure it
makes sense. This happens before doing any additional validation such as
a checksum or value check. In order to differentiate between a bad
header and a non-existent file, we need to update the API for loading a
reverse index.
Make load_pack_revindex_from_disk() non-static and specify that a
positive value means "the file does not exist" while other errors during
parsing are negative values. Since an invalid header prevents setting up
the structures we would use for further validations, we can stop at that
point.
The place where we can distinguish between a missing file and a corrupt
file is inside load_revindex_from_disk(), which is used both by pack
rev-indexes and multi-pack-index rev-indexes. Some tests in t5326
demonstrate that it is critical to take some conditions to allow
positive error signals.
Add tests that check the three header values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'fsck' builtin checks many of Git's on-disk data structures, but
does not currently validate the pack rev-index files (a .rev file to
pair with a .pack and .idx file).
Before doing a more-involved check process, create the scaffolding
within builtin/fsck.c to have a new error type and add that error type
when the API method verify_pack_revindex() returns an error. That method
does nothing currently, but we will add checks to it in later changes.
For now, check that 'git fsck' succeeds without any errors in the normal
case. Future checks will be paired with tests that corrupt the .rev file
appropriately.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing server capabilities, we use "int" to store lengths and
offsets. At first glance this seems like a spot where our parser may be
confused by integer overflow if somebody sent us a malicious response.
In practice these strings are all bounded by the 64k limit of a
pkt-line, so using "int" is OK. However, it makes the code simpler to
audit if they just use size_t everywhere. Note that because we take
these parameters as pointers, this also forces many callers to update
their declared types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to write a bitmap, we need to have full coverage of all objects
that are about to be packed. In the traditional non-multi-pack-index
world this meant we need to do a full repack of all objects into a
single packfile. But in the new multi-pack-index world we can get away
with writing bitmaps when we have multiple packfiles as long as the
multi-pack-index covers all objects.
This is not always the case though. When asked to perform a repack of
local objects, only, then we cannot guarantee to have full coverage of
all objects regardless of whether we do a full repack or a repack with a
multi-pack-index. The end result is that writing the bitmap will fail in
both worlds:
$ git multi-pack-index write --stdin-packs --bitmap <packfiles
warning: Failed to write bitmap index. Packfile doesn't have full closure (object 1529341d78cf45377407369acb0f4ff2b5cdae42 is missing)
error: could not write multi-pack bitmap
Now there are two different ways to fix this. The first one would be to
amend git-multi-pack-index(1) to disable writing bitmaps when we notice
that we don't have full object coverage.
- We don't have enough information in git-multi-pack-index(1) in
order to tell whether the local repository _should_ have full
coverage. Because even when connected to an alternate object
directory, it may be the case that we still have all objects
around in the main object database.
- git-multi-pack-index(1) is quite a low-level tool. Automatically
disabling functionality that it was asked to provide does not feel
like the right thing to do.
We can easily fix it at a higher level in git-repack(1) though. When
asked to only include local objects via `-l` and when connected to an
alternate object directory then we will override the user's ask and
disable writing bitmaps with a warning. This is similar to what we do in
git-pack-objects(1), where we also disable writing bitmaps in case we
omit an object from the pack.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user passes `-l` to git-repack(1), then they essentially ask us
to only repack objects part of the local object database while ignoring
any packfiles part of an alternate object database. And we in fact honor
this bit when doing a geometric repack as the resulting packfile will
only ever contain local objects.
What we're missing though is that we don't take locality of packfiles
into account when computing whether the geometric sequence is intact or
not. So even though we would only ever roll up local packfiles anyway,
we could end up trying to repack because of non-local packfiles. This
does not make much sense, and in the worst case it can cause us to try
and do the geometric repack over and over again because we're never able
to restore the geometric sequence.
Fix this bug by honoring whether the user has passed `-l`. If so, we
skip adding any non-local packfiles to the pack geometry.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing the same packfile both as included and excluded via the
`--stdin-packs` option, then we will return an error because the
excluded packfile cannot be found. This is because we will only set the
`util` pointer for the included packfile list if it was found, so that
we later die when we notice that it's in fact not set for the excluded
packfile list.
Fix this bug by always setting the `util` pointer for both the included
and excluded list entries.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passed the same packfile twice via `--stdin-packs` we return an
error that the packfile supposedly was not found. This is because when
reading packs into the list of included or excluded packfiles, we will
happily re-add packfiles even if they are part of the lists already. And
while the list can now contain duplicates, we will only set the `util`
pointer of the first list entry to the `packed_git` structure. We notice
that at a later point when checking that all list entries have their
`util` pointer set and die with an error.
While this is kind of a nonsensical request, this scenario can be hit
when doing geometric repacks. When a repository is connected to an
alternate object directory and both have the exact same packfile then
both would get added to the geometric sequence. And when we then decide
to perform the repack, we will invoke git-pack-objects(1) with the same
packfile twice.
Fix this bug by removing any duplicates from both the included and
excluded packs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing the multi-pack-index with geometric repacking we will add
all packfiles to the index that are part of the geometric sequence. This
can potentially also include packfiles borrowed from an alternate object
directory. But given that a multi-pack-index can only ever include packs
that are part of the main object database this does not make much sense
whatsoever.
In the edge case where all packfiles are contained in the alternate
object database and the local repository has none itself this bug can
cause us to invoke git-multi-pack-index(1) with only non-local packfiles
that it ultimately cannot find. This causes it to return an error and
thus causes the geometric repack to fail.
Fix the code to skip non-local packfiles.
Co-authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a geometric repack with multi-pack-indices, then we ask
git-multi-pack-index(1) to use the largest packfile as the preferred
pack. It can happen though that the largest packfile is not part of the
main object database, but instead part of an alternate object database.
The result is that git-multi-pack-index(1) will not be able to find the
preferred pack and print a warning. It then falls back to use the first
packfile that the multi-pack-index shall reference.
Fix this bug by only considering packfiles as preferred pack that are
local. This is the right thing to do given that a multi-pack-index
should never reference packfiles borrowed from an alternate.
While at it, rename the function `get_largest_active_packfile()` to
`get_preferred_pack()` to better document its intent.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the given format string expands to the empty string, a newline is
still printed. This makes using the output linewise more tedious. For
example, git update-ref --stdin does not accept empty lines.
Add options to "git branch", "git for-each-ref", and "git tag" to
not print these empty lines. The default behavior remains the same.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in e8c58f894b (t: support GIT_TEST_WRITE_REV_INDEX, 2021-01-25), we
added a test knob to conditionally enable writing a ".rev" file when
indexing a pack. At the time, this was used to ensure that the test
suite worked even when ".rev" files were written, which served as a
stress-test for the on-disk reverse index implementation.
Now that reading from on-disk ".rev" files is enabled by default, the
test knob `GIT_TEST_WRITE_REV_INDEX` no longer has any meaning.
We could get rid of the option entirely, but there would be no
convenient way to test Git when ".rev" files *aren't* in place.
Instead of getting rid of the option, invert its meaning to instead
disable writing ".rev" files, thereby running the test suite in a mode
where the reverse index is generated from scratch.
This ensures that, when GIT_TEST_NO_WRITE_REV_INDEX is set to some
spelling of "true", we are still running and exercising Git's behavior
when forced to generate reverse indexes from scratch. Do so by setting
it in the linux-TEST-vars CI run to ensure that we are maintaining good
coverage of this now-legacy code.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in e37d0b8730 (builtin/index-pack.c: write reverse indexes,
2021-01-25), Git learned how to read and write a pack's reverse index
from a file instead of in-memory.
A pack's reverse index is a mapping from pack position (that is, the
order that objects appear together in a ".pack") to their position in
lexical order (that is, the order that objects are listed in an ".idx"
file).
Reverse indexes are consulted often during pack-objects, as well as
during auxiliary operations that require mapping between pack offsets,
pack order, and index index.
They are useful in GitHub's infrastructure, where we have seen a
dramatic increase in performance when writing ".rev" files[1]. In
particular:
- an ~80% reduction in the time it takes to serve fetches on a popular
repository, Homebrew/homebrew-core.
- a ~60% reduction in the peak memory usage to serve fetches on that
same repository.
- a collective savings of ~35% in CPU time across all pack-objects
invocations serving fetches across all repositories in a single
datacenter.
Reverse indexes are also beneficial to end-users as well as forges. For
example, the time it takes to generate a pack containing the objects for
the 10 most recent commits in linux.git (representing a typical push) is
significantly faster when on-disk reverse indexes are available:
$ { git rev-parse HEAD && printf '^' && git rev-parse HEAD~10 } >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
Benchmark 1: git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 543.0 ms ± 20.3 ms [User: 616.2 ms, System: 58.8 ms]
Range (min … max): 521.0 ms … 577.9 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 245.0 ms ± 11.4 ms [User: 335.6 ms, System: 31.3 ms]
Range (min … max): 226.0 ms … 259.6 ms 13 runs
Summary
'git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null' ran
2.22 ± 0.13 times faster than 'git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
The same is true of writing a pack containing the objects for the 30
most-recent commits:
$ { git rev-parse HEAD && printf '^' && git rev-parse HEAD~30 } >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
Benchmark 1: git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 866.5 ms ± 16.2 ms [User: 1414.5 ms, System: 97.0 ms]
Range (min … max): 839.3 ms … 886.9 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 581.6 ms ± 10.2 ms [User: 1181.7 ms, System: 62.6 ms]
Range (min … max): 567.5 ms … 599.3 ms 10 runs
Summary
'git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null' ran
1.49 ± 0.04 times faster than 'git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
...and savings on trivial operations like computing the on-disk size of
a single (packed) object are even more dramatic:
$ git rev-parse HEAD >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --batch-check="%(objectsize:disk)" <in'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 305.8 ms ± 11.4 ms [User: 264.2 ms, System: 41.4 ms]
Range (min … max): 290.3 ms … 331.1 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 4.0 ms ± 0.3 ms [User: 1.7 ms, System: 2.3 ms]
Range (min … max): 1.6 ms … 4.6 ms 1155 runs
Summary
'git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in' ran
76.96 ± 6.25 times faster than 'git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in'
In the more than two years since e37d0b8730 was merged, Git's
implementation of on-disk reverse indexes has been thoroughly tested,
both from users enabling `pack.writeReverseIndexes`, and from GitHub's
deployment of the feature. The latter has been running without incident
for more than two years.
This patch changes Git's behavior to write on-disk reverse indexes by
default when indexing a pack, which should make the above operations
faster for everybody's Git installation after a repack.
(The previous commit explains some potential drawbacks of using on-disk
reverse indexes in certain limited circumstances, that essentially boil
down to a trade-off between time to generate, and time to access. For
those limited cases, the `pack.readReverseIndex` escape hatch can be
used).
[1]: https://github.blog/2021-04-29-scaling-monorepo-maintenance/#reverse-indexes
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" from an empty repository learned to propagate the
choice of the hash algorithm from the source repository to the
newly created repository.
* jc/clone-object-format-from-void:
clone: propagate object-format when cloning from void
"git sparse-checkout" command learns a debugging aid for the sparse
rule definitions.
* ws/sparse-check-rules:
builtin/sparse-checkout: add check-rules command
builtin/sparse-checkout: remove NEED_WORK_TREE flag
cache.h's nature of a dumping ground of includes prevented it from
being included in some compat/ files, forcing us into a workaround
of having a double forward declaration of the read_in_full() function
(see commit 14086b0a13 ("compat/pread.c: Add a forward declaration to
fix a warning", 2007-11-17)). Now that we have moved functions like
read_in_full() from cache.h to wrapper.h, and wrapper.h isn't littered
with unrelated and scary #defines, get rid of the extra forward
declaration and just have compat/pread.c include wrapper.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache.h and strbuf.[ch] had editor-related functions. Move these into
editor.[ch].
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move functions from cache.h for zlib.c into a new header file. Since
adding a "zlib.h" would cause issues with the real zlib, rename zlib.c
to git-zlib.c while we are at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6f054f9fb3 (builtin/clone.c: disallow --local clones with
symlinks, 2022-07-28) gives a good error message when "git clone
--local" fails when the repo to clone has symlinks in
"$GIT_DIR/objects". In bffc762f87 (dir-iterator: prevent top-level
symlinks without FOLLOW_SYMLINKS, 2023-01-24), we later extended this
restriction to the case where "$GIT_DIR/objects" is itself a symlink,
but we didn't update the error message then - bffc762f87's tests show
that we print a generic "failed to start iterator over" message.
This is exacerbated by the fact that Documentation/git-clone.txt
mentions neither restriction, so users are left wondering if this is
intentional behavior or not.
Fix this by adding a check to builtin/clone.c: when doing a local clone,
perform an extra check to see if "$GIT_DIR/objects" is a symlink, and if
so, assume that that was the reason for the failure and report the
relevant information. Ideally, dir_iterator_begin() would tell us that
the real failure reason is the presence of the symlink, but (as far as I
can tell) there isn't an appropriate errno value for that.
Also, update Documentation/git-clone.txt to reflect that this
restriction exists.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling "--strategy-option" rebase collects the commands into a
struct string_list, then concatenates them into a string, prepending "--"
to each one before splitting the string and removing the "--" prefix.
This is an artifact of the scripted rebase and the need to support
"rebase --preserve-merges". Now that "--preserve-merges" no-longer
exists we can cleanup the way the argument is handled.
The tests for a bad strategy option are adjusted now that
parse_strategy_opts() is no-longer called when starting a rebase. The
fact that it only errors out when running "git rebase --continue" is a
mixed blessing but the next commit will fix the root cause of the
parsing problem so lets not worry about that here.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer stores the merge strategy options in an array of strings
which allocated with ALLOC_GROW(). Using "struct strvec" avoids manually
managing the memory of that array and simplifies the code.
Aside from memory allocation the changes to the sequencer are largely
mechanical, changing xopts_nr to xopts.nr and xopts[i] to xopts.v[i]. A
new option parsing macro OPT_STRVEC() is also added to collect the
strategy options. Hopefully this can be used to simplify the code in
builtin/merge.c in the future.
Note that there is a change of behavior to "git cherry-pick" and "git
revert" as passing “--no-strategy-option” will now clear any previous
strategy options whereas before this change it did nothing.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The state files for "--strategy" and "--strategy-option" are written and
read twice, once by builtin/rebase.c and then by sequencer.c. This is an
artifact of the scripted rebase and the need to support "rebase
--preserve-merges". Now that "--preserve-merges" no-longer exists we
only need to read and write these files in sequencer.c. This enables us
to remove a call to free() in read_strategy_opts() that was added by
f1f4ebf432 (sequencer.c: fix "opts->strategy" leak in
read_strategy_opts(), 2022-11-08) as this commit fixes the root cause of
that leak.
There is further scope for removing duplication in the reading and
writing of state files between builtin/rebase.c and sequencer.c but that
is left for a follow up series.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same macro in the archive reader code as on the writer side in
archive-tar.c to document the connection.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --all" does not have to download and handle the same
bundleURI over and over, which has been corrected.
* ds/fetch-bundle-uri-with-all:
fetch: download bundles once, even with --all
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Assorted config API updates.
* ab/config-multi-and-nonbool:
for-each-repo: with bad config, don't conflate <path> and <cmd>
config API: add "string" version of *_value_multi(), fix segfaults
config API users: test for *_get_value_multi() segfaults
for-each-repo: error on bad --config
config API: have *_multi() return an "int" and take a "dest"
versioncmp.c: refactor config reading next commit
config API: add and use a "git_config_get()" family of functions
config tests: add "NULL" tests for *_get_value_multi()
config tests: cover blind spots in git_die_config() tests
Clean-up of the code path that reports what "git fetch" did to each
ref.
* ps/fetch-ref-update-reporting:
fetch: centralize printing of reference updates
fetch: centralize logic to print remote URL
fetch: centralize handling of per-reference format
fetch: pass the full local reference name to `format_display`
fetch: move output format into `display_state`
fetch: move reference width calculation into `display_state`
Code clean-up for "-Wunused-parameter" build.
* jk/unused-post-2.40-part2:
parse-options: drop parse_opt_unknown_cb()
t/helper: mark unused argv/argc arguments
mark "argv" as unused when we check argc
builtins: mark unused prefix parameters
builtins: annotate always-empty prefix parameters
builtins: always pass prefix to parse_options()
fast-import: fix file access when run from subdir
"git for-each-ref" learns '%(ahead-behind:<base>)' that computes the
distances from a single reference point in the history with bunch
of commits in bulk.
* ds/ahead-behind:
commit-reach: add tips_reachable_from_bases()
for-each-ref: add ahead-behind format atom
commit-reach: implement ahead_behind() logic
commit-graph: introduce `ensure_generations_valid()`
commit-graph: return generation from memory
commit-graph: simplify compute_generation_numbers()
commit-graph: refactor compute_topological_levels()
for-each-ref: explicitly test no matches
for-each-ref: add --stdin option
New git users may want to locally delete remote-tracking branches but
don't really understand how they are distinguished from branches by git.
Then one may naively try:
`git branch -d foo/bar` and get a correct error `branch foo/bar not
found` but hard to understand for a newbie, this patch aims to guide one
in such case.
when failing to delete a branch with `git branch -d <branch>` because
of branch not found, try to find a **remote refs** matching `<branch>`
and if so, add an hint:
`Did you forget --remote?` to the error message
Signed-off-by: Clement Mabileau <mabileau.clement@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no merge.tool or diff.tool is configured or manually selected, the
selection of a default tool is sensitive to the DISPLAY variable; in a
GUI session a gui-specific tool will be proposed if found, and
otherwise a terminal-based one. This "GUI-optimizing" behavior is
important because a GUI can make a huge difference to a user's ability
to understand and correctly complete a non-trivial conflicting merge.
Some time ago the merge.guitool and diff.guitool config options were
introduced to enable users to configure both a GUI tool, and a non-GUI
tool (with fallback if no GUI tool configured), in the same environment.
Unfortunately, the --gui argument introduced to support the selection of
the guitool is still explicit. When using configured tools, there is no
equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI
environment" behavior.
As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration
options, difftool.guiDefault and mergetool.guiDefault, supporting a special
value "auto" which causes the corresponding tool or guitool to be selected
depending on the presence of a non-empty DISPLAY value. Also support "true"
to say "default to the guitool (unless --no-gui is passed on the
commandline)", and "false" as the previous default behavior when these new
configuration options are not specified.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user could prepare an empty repository and set it to use SHA256 as
the object format. The new repository created by "git clone" from
such a repository however would not record that it is expecting
objects in the same SHA256 format. This works as expected if the
source repository is not empty.
Just like we started copying the name of the primary branch from the
remote repository even if it is unborn in 3d8314f8 (clone: propagate
empty remote HEAD even with other branches, 2022-07-07), lift the
code that records the object format out of the block executed only
when cloning from an instantiated repository, so that it works also
when cloning from an empty repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-redundant" gave a warning when run, as the command has
outlived its usefulness long ago and is nominated for future
removal. Now we escalate to give an error.
* jk/really-deprecate-pack-redundant:
pack-redundant: escalate deprecation warning to an error
Streamline --rebase-merges command line option handling and
introduce rebase.merges configuration variable.
* ah/rebase-merges-config:
rebase: add a config option for --rebase-merges
rebase: deprecate --rebase-merges=""
rebase: add documentation and test for --no-rebase-merges
Code clean-up.
* jk/fast-export-cleanup:
fast-export: drop unused parameter from anonymize_commit_message()
fast-export: drop data parameter from anonymous generators
fast-export: de-obfuscate --anonymize-map handling
fast-export: factor out anonymized_entry creation
fast-export: simplify initialization of anonymized hashmaps
fast-export: drop const when storing anonymized values
Update 'git write-tree' to allow using the sparse-index in memory
without expanding to a full one.
The recursive algorithm for update_one() was already updated in 2de37c5
(cache-tree: integrate with sparse directory entries, 2021-03-03) to
handle sparse directory entries in the index. Hence we can just set the
requires-full-index to false for "write-tree".
The `p2000` tests demonstrate a ~96% execution time reduction for 'git
write-tree' using a sparse index:
Test before after
-----------------------------------------------------------------
2000.78: git write-tree (full-v3) 0.34 0.33 -2.9%
2000.79: git write-tree (full-v4) 0.32 0.30 -6.3%
2000.80: git write-tree (sparse-v3) 0.47 0.02 -95.8%
2000.81: git write-tree (sparse-v4) 0.45 0.02 -95.6%
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
git describe compares the index with the working tree when (and only
when) it is run with the "--dirty" flag. This is done by the
run_diff_index() function. The function has been made aware of the
sparse-index in the series that led to 8d2c3732 (Merge branch
'ld/sparse-diff-blame', 2021-12-21). Hence we can just set the
requires-full-index to false for "describe".
Performance metrics
Test HEAD~1 HEAD
-------------------------------------------------------------------------------------------------
2000.2: git describe --dirty (full-v3) 0.08(0.09+0.01) 0.08(0.06+0.03) +0.0%
2000.3: git describe --dirty (full-v4) 0.09(0.07+0.03) 0.08(0.05+0.04) -11.1%
2000.4: git describe --dirty (sparse-v3) 0.88(0.82+0.06) 0.02(0.01+0.05) -97.7%
2000.5: git describe --dirty (sparse-v4) 0.68(0.60+0.08) 0.02(0.02+0.04) -97.1%
2000.6: echo >>new && git describe --dirty (full-v3) 0.08(0.04+0.05) 0.08(0.05+0.04) +0.0%
2000.7: echo >>new && git describe --dirty (full-v4) 0.08(0.07+0.03) 0.08(0.05+0.04) +0.0%
2000.8: echo >>new && git describe --dirty (sparse-v3) 0.75(0.69+0.07) 0.02(0.03+0.03) -97.3%
2000.9: echo >>new && git describe --dirty (sparse-v4) 0.81(0.73+0.09) 0.02(0.01+0.05) -97.5%
Signed-off-by: Raghul Nanth A <nanth.raghul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetch.bundleURI is set, 'git fetch' downloads bundles from the
given bundle URI before fetching from the specified remote. However,
when using non-file remotes, 'git fetch --all' will launch 'git fetch'
subprocesses which then read fetch.bundleURI and fetch the bundle list
again. We do not expect the bundle list to have new information during
these multiple runs, so avoid these extra calls by un-setting
fetch.bundleURI in the subprocess arguments.
Be careful to skip fetching bundles for the empty bundle string.
Fetching bundles from the empty list presents some interesting test
failures.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to include and/or uninclude parse-options.h file as
needed.
* sg/parse-options-h-users:
treewide: remove unnecessary inclusions of parse-options.h from headers
treewide: include parse-options.h in source files
A few commands don't take any options at all, and confirm this by
checking argc. After that they have no need to look at argv, but we're
still stuck with it by convention. Let's annotate these cases so that
the compiler doesn't complain with -Wunused-parameter.
Note that in scalar and get-tar-commit-id, we're forced to keep argv by
calling convention (the functions must match cmd_main() and builtin
cmd_foo() conventions, respectively). In diff, these are subcommand
modes that we call individually, so we _could_ just drop the argv
parameters entirely. But it's weird to pass argc without argv, and it
implies that the caller knows that the subcommands aren't interested in
further arguments. It's less confusing to just keep them and silence the
compiler warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All builtins receive a "prefix" parameter, but it is only useful if they
need to adjust filenames given by the user on the command line. For
builtins that do not even call parse_options(), they often don't look at
the prefix at all, and -Wunused-parameter complains.
Let's annotate those to silence the compiler warning. I gave a quick
scan of each of these cases, and it seems like they don't have anything
they _should_ be using the prefix for (i.e., there is no hidden bug that
we are missing). The only questionable cases I saw were:
- in git-unpack-file, we create a tempfile which will always be at the
root of the repository, even if the command is run from a subdir.
Arguably this should be created in the subdir from which we're run
(as we report the path only as a relative name). However, nobody has
complained, and I'm hesitant to change something that is deep
plumbing going back to April 2005 (though I think within our
scripts, the sole caller in git-merge-one-file would be OK, as it
moves to the toplevel itself).
- in fetch-pack, local-filesystem remotes are taken as relative to the
project root, not the current directory. So:
git init server.git
[...put stuff in server.git...]
git init client.git
cd client.git
mkdir subdir
cd subdir
git fetch-pack ../../server.git ...
won't work, as we quietly move to the top of the repository before
interpreting the path (so "../server.git" would work). This is
weird, but again, nobody has complained and this is how it has
always worked. And this is how "git fetch" works, too. Plus it
raises questions about how a configured remote like:
git config remote.origin.url ../server.git
should behave. I can certainly come up with a reasonable set of
behavior, but it may not be worth stirring up complications in a
plumbing tool.
So I've left the behavior untouched in both of those cases. If anybody
really wants to revisit them, it's easy enough to drop the UNUSED
marker. This commit is just about removing them as obstacles to turning
on -Wunused-parameter all the time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's usually a bad idea for a builtin's cmd_foo() to ignore the "prefix"
argument it gets, as it needs to prepend that string when accessing any
paths given by the user.
But if a builtin does not ask for the git wrapper to run repository
setup (via the RUN_SETUP or RUN_SETUP_GENTLY flags), then we know the
prefix will always be NULL (it is adjusting for the chdir() done during
repo setup, but there cannot be one if we did not set up the repo). In
those cases it's OK to ignore "prefix", but it's worth annotating for a
few reasons:
1. It serves as documentation to somebody reading the code about what
we expect.
2. If the flags in git.c ever change, the run-time assertion may help
detect the problem (though only if the command is run from a
subdirectory of the repository).
3. It notes to the compiler that we are OK ignoring "prefix". In
particular, this silences -Wunused-parameter. It _could_ also help
the compiler generate better code (because it will know the prefix
is NULL), but in practice this is quite unlikely to matter.
Note that I've only added this annotation to commands which triggered
-Wunused-parameter. It would be correct to add it to any builtin which
doesn't ask for RUN_SETUP, but most of the rest of them do the sensible
thing with "prefix" by passing it to parse_options(). So they're much
more likely to just work if they ever switched to RUN_SETUP, and aren't
worth annotating.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our builtins receive a "prefix" argument as part of their cmd_foo()
function. We should always pass this to parse_options() if we're calling
it, as it may be used for OPT_FILENAME() options.
In the cases here, there's no option that would use it, so we're not
fixing any bug. This is just future-proofing and setting a good example
(plus quelling some -Wunused-parameter warnings).
Note in the case of revert/cherry-pick, that we plumb the prefix through
to run_sequencer(), as those builtins are just thin wrappers around it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cmd_fast_import(), we ignore the "prefix" argument entirely, even
though it tells us how we may have changed directory to the root of the
repository earlier in the process. Which means that if you run it from a
subdir and point to paths in the filesystem, like:
cd subdir
git fast-import --import-marks=foo <dump
then it will look for "foo" in the root of the repository, not the
current directory ("subdir/") which the user would have expected.
We can fix this by recording the prefix and using it as appropriate
whenever we open a file for reading or writing. I found each of these by
looking for cases where we call fopen() within fast-import.c, so this
should cover all cases. The new test triggers each one, as well as
making sure we don't accidentally apply the prefix when --relative-marks
is in use (since that option interprets some paths as relative to a
specific directory).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transports that do not support protocol v2 did not correctly fall
back to protocol v0 under certain conditions, which has been
corrected.
* jk/fix-proto-downgrade-to-v0:
git_connect(): fix corner cases in downgrading v2 to v0
Fix a logic error in 4950b2a2b5 (for-each-repo: run subcommands on
configured repos, 2020-09-11). Due to assuming that elements returned
from the repo_config_get_value_multi() call wouldn't be "NULL" we'd
conflate the <path> and <command> part of the argument list when
running commands.
As noted in the preceding commit the fix is to move to a safer
"*_string_multi()" version of the *_multi() API. This change is
separated from the rest because those all segfaulted. In this change
we ended up with different behavior.
When using the "--config=<config>" form we take each element of the
list as a path to a repository. E.g. with a configuration like:
[repo] list = /some/repo
We would, with this command:
git for-each-repo --config=repo.list status builtin
Run a "git status" in /some/repo, as:
git -C /some/repo status builtin
I.e. ask "status" to report on the "builtin" directory. But since a
configuration such as this would result in a "struct string_list *"
with one element, whose "string" member is "NULL":
[repo] list
We would, when constructing our command-line in
"builtin/for-each-repo.c"...
strvec_pushl(&child.args, "-C", path, NULL);
for (i = 0; i < argc; i++)
strvec_push(&child.args, argv[i]);
...have that "path" be "NULL", and as strvec_pushl() stops when it
sees NULL we'd end with the first "argv" element as the argument to
the "-C" option, e.g.:
git -C status builtin
I.e. we'd run the command "builtin" in the "status" directory.
In another context this might be an interesting security
vulnerability, but I think that this amounts to a nothingburger on
that front.
A hypothetical attacker would need to be able to write config for the
victim to run, if they're able to do that there's more interesting
attack vectors. See the "safe.directory" facility added in
8d1a744820 (setup.c: create `safe.bareRepository`, 2022-07-14).
An even more unlikely possibility would be an attacker able to
generate the config used for "for-each-repo --config=<key>", but
nothing else (e.g. an automated system producing that list).
Even in that case the attack vector is limited to the user running
commands whose name matches a directory that's interesting to the
attacker (e.g. a "log" directory in a repository). The second
argument (if any) of the command is likely to make git die without
doing anything interesting (e.g. "-p" to "log", there being no "-p"
built-in command to run).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix numerous and mostly long-standing segfaults in consumers of
the *_config_*value_multi() API. As discussed in the preceding commit
an empty key in the config syntax yields a "NULL" string, which these
users would give to strcmp() (or similar), resulting in segfaults.
As this change shows, most users users of the *_config_*value_multi()
API didn't really want such an an unsafe and low-level API, let's give
them something with the safety of git_config_get_string() instead.
This fix is similar to what the *_string() functions and others
acquired in[1] and [2]. Namely introducing and using a safer
"*_get_string_multi()" variant of the low-level "_*value_multi()"
function.
This fixes segfaults in code introduced in:
- d811c8e17c (versionsort: support reorder prerelease suffixes, 2015-02-26)
- c026557a37 (versioncmp: generalize version sort suffix reordering, 2016-12-08)
- a086f921a7 (submodule: decouple url and submodule interest, 2017-03-17)
- a6be5e6764 (log: add log.excludeDecoration config option, 2020-04-16)
- 92156291ca (log: add default decoration filter, 2022-08-05)
- 50a044f1e4 (gc: replace config subprocesses with API calls, 2022-09-27)
There are now two users ofthe low-level API:
- One in "builtin/for-each-repo.c", which we'll convert in a
subsequent commit.
- The "t/helper/test-config.c" code added in [3].
As seen in the preceding commit we need to give the
"t/helper/test-config.c" caller these "NULL" entries.
We could also alter the underlying git_configset_get_value_multi()
function to be "string safe", but doing so would leave no room for
other variants of "*_get_value_multi()" that coerce to other types.
Such coercion can't be built on the string version, since as we've
established "NULL" is a true value in the boolean context, but if we
coerced it to "" for use in a list of strings it'll be subsequently
coerced to "false" as a boolean.
The callback pattern being used here will make it easy to introduce
e.g. a "multi" variant which coerces its values to "bool", "int",
"path" etc.
1. 40ea4ed903 (Add config_error_nonbool() helper function,
2008-02-11)
2. 6c47d0e8f3 (config.c: guard config parser from value=NULL,
2008-02-11).
3. 4c715ebb96 (test-config: add tests for the config_set API,
2014-07-28)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in 6c62f01552 (for-each-repo: do nothing on empty config,
2021-01-08) this command wants to ignore a non-existing config key,
but let's not conflate that with bad config.
Before this, all these added tests would pass with an exit code of 0.
We could preserve the comment added in 6c62f01552, but now that we're
directly using the documented repo_config_get_value_multi() value it's
just narrating something that should be obvious from the API use, so
let's drop it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the "git_configset_get_value_multi()" function and its siblings
return an "int" and populate a "**dest" parameter like every other
git_configset_get_*()" in the API.
As we'll take advantage of in subsequent commits, this fixes a blind
spot in the API where it wasn't possible to tell whether a list was
empty from whether a config key existed. For now we don't make use of
those new return values, but faithfully convert existing API users.
Most of this is straightforward, commentary on cases that stand out:
- To ensure that we'll properly use the return values of this function
in the future we're using the "RESULT_MUST_BE_USED" macro introduced
in [1].
As git_die_config() now has to handle this return value let's have
it BUG() if it can't find the config entry. As tested for in a
preceding commit we can rely on getting the config list in
git_die_config().
- The loops after getting the "list" value in "builtin/gc.c" could
also make use of "unsorted_string_list_has_string()" instead of using
that loop, but let's leave that for now.
- In "versioncmp.c" we now use the return value of the functions,
instead of checking if the lists are still non-NULL.
1. 1e8697b5c4 (submodule--helper: check repo{_submodule,}_init()
return values, 2022-09-01),
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have the basic "git_config_get_value()" function and its
"repo_*" and "configset" siblings to get a given "key" and assign the
last key found to a provided "value".
But some callers don't care about that value, but just want to use the
return value of the "get_value()" function to check whether the key
exist (or another non-zero return value).
The immediate motivation for this is that a subsequent commit will
need to change all callers of the "*_get_value_multi()" family of
functions. In two cases here we (ab)used it to check whether we had
any values for the given key, but didn't care about the return value.
The rest of the callers here used various other config API functions
to do the same, all of which resolved to the same underlying functions
to provide the answer.
Some of these were using either git_config_get_string() or
git_config_get_string_tmp(), see fe4c750fb1 (submodule--helper: fix a
configure_added_submodule() leak, 2022-09-01) for a recent example. We
can now use a helper function that doesn't require a throwaway
variable.
We could have changed git_configset_get_value_multi() (and then
git_config_get_value() etc.) to accept a "NULL" as a "dest" for all
callers, but let's avoid changing the behavior of existing API
users. Having an "unused" value that we throw away internal to
config.c is cheap.
A "NULL as optional dest" pattern is also more fragile, as the intent
of the caller might be misinterpreted if he were to accidentally pass
"NULL", e.g. when "dest" is passed in from another function.
Another name for this function could have been
"*_config_key_exists()", as suggested in [1]. That would work for all
of these callers, and would currently be equivalent to this function,
as the git_configset_get_value() API normalizes all non-zero return
values to a "1".
But adding that API would set us up to lose information, as e.g. if
git_config_parse_key() in the underlying configset_find_element()
fails we'd like to return -1, not 1.
Let's change the underlying configset_find_element() function to
support this use-case, we'll make further use of it in a subsequent
commit where the git_configset_get_value_multi() function itself will
expose this new return value.
This still leaves various inconsistencies and clobbering or ignoring
of the return value in place. E.g here we're modifying
configset_add_value(), but ever since it was added in [2] we've been
ignoring its "int" return value, but as we're changing the
configset_find_element() it uses, let's have it faithfully ferry that
"ret" along.
Let's also use the "RESULT_MUST_BE_USED" macro introduced in [3] to
assert that we're checking the return value of
configset_find_element().
We're leaving the same change to configset_add_value() for some future
series. Once we start paying attention to its return value we'd need
to ferry it up as deep as do_config_from(), and would need to make
least read_{,very_}early_config() and git_protected_config() return an
"int" instead of "void". Let's leave that for now, and focus on
the *_get_*() functions.
1. 3c8687a73e (add `config_set` API for caching config-like files, 2014-07-28)
2. https://lore.kernel.org/git/xmqqczadkq9f.fsf@gitster.g/
3. 1e8697b5c4 (submodule--helper: check repo{_submodule,}_init()
return values, 2022-09-01),
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As can easily be seen from grepping in our sources, we had these uses
of "the_repository" in various library code in cases where the
function in question was already getting a "struct repository *"
argument. Let's use that argument instead.
Out of these changes only the changes to "cache-tree.c",
"commit-reach.c", "shallow.c" and "upload-pack.c" would have cleanly
applied before the migration away from the "repo_*()" wrapper macros
in the preceding commits.
The rest aren't new, as we'd previously implicitly refer to
"the_repository", but it's now more obvious that we were doing the
wrong thing all along, and should have used the parameter instead.
The change to change "get_index_format_default(the_repository)" in
"read-cache.c" to use the "r" variable instead should arguably have
been part of [1], or in the subsequent cleanup in [2]. Let's do it
here, as can be seen from the initial code in [3] it's not important
that we use "the_repository" there, but would prefer to always use the
current repository.
This change excludes the "the_repository" use in "upload-pack.c"'s
upload_pack_advertise(), as the in-flight [4] makes that change.
1. ee1f0c242e (read-cache: add index.skipHash config option,
2023-01-06)
2. 6269f8eaad (treewide: always have a valid "index_state.repo"
member, 2023-01-17)
3. 7211b9e753 (repo-settings: consolidate some config settings,
2019-08-13)
4. <Y/hbUsGPVNAxTdmS@coredump.intra.peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preceding commits we changed many calls to macros that were
providing a "the_repository" argument to invoke corresponding repo_*()
function instead. Let's follow-up and adjust references to those in
comments, which coccinelle didn't (and inherently can't) catch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"revision.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"rerere.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"refs.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"promisor-remote.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"packfile.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"pretty.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"diff.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit-reach.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There exists no direct way to interrogate git about which paths are
matched by a given set of sparsity rules. It is possible to get this
information from git, but it includes checking out the commit that
contains the paths, applying the sparse checkout patterns and then using
something like 'git ls-files -t' to check if the skip worktree bit is
set. This works in some case, but there are cases where it is awkward or
infeasible to generate a checkout for this purpose.
Exposing the pattern matching of sparse checkout enables more tooling to
be built and avoids a situation where tools that want to reason about
sparse checkouts start containing parallel implementation of the rules.
To accommodate this, add a 'check-rules' subcommand to the
'sparse-checkout' builtin along the lines of the 'git check-ignore' and
'git check-attr' commands. The new command accepts a list of paths on
stdin and outputs just the ones the match the sparse checkout.
To allow for use in a bare repository and to allow for interrogating
about other patterns than the current ones, include a '--rules-file'
option which allows the caller to explicitly pass sparse checkout rules
in the format accepted by 'sparse-checkout set --stdin'.
To allow for reuse of the handling of input patterns for the
'--rules-file' flag, modify 'add_patterns_from_input()' to be able to
read from a 'FILE' instead of just stdin.
To allow for reuse of the logic which decides whether or not rules
should be interpreted as cone-mode patterns, split that part out of
'update_modes()' such that can be called without modifying the config.
An alternative could have been to create a new 'check-sparsity' command.
However, placing it under 'sparse-checkout' allows for a) more easily
re-using the sparse checkout pattern matching and cone/non-code mode
handling, and b) keeps the documentation for the command next to the
experimental warning and the cone-mode discussion.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding a sub-command to 'sparse-checkout' that can be
run in a bare repository, remove the 'NEED_WORK_TREE' flag from its
entry in the 'commands' array of 'git.c'.
To avoid that this changes any behaviour, add calls to
'setup_work_tree()' to all of the 'sparse-checkout' sub-commands and add
tests that verify that 'sparse-checkout <cmd>' still fail with a clear
error message telling the user that the command needs a work tree.
Signed-off-by: William Sprent <williams@unity3d.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we rename a branch ref, we need to update any worktree that have
its HEAD pointing to the branch ref being renamed, so to make it use the
new ref name.
If we know in advance that we're renaming a branch that is not currently
checked out in any worktree, we can skip this step entirely. Let's do
it so.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cfaff3aac (branch -m: allow renaming a yet-unborn branch, 2020-12-13)
we added support for renaming an orphan branch when that branch is
checked out in the current worktree.
Let's also allow renaming an orphan branch checked out in a worktree
different than the current one.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bcfc82bd48 (branch: description for non-existent branch errors,
2022-10-08) we checked the HEAD in the current worktree to detect if the
branch to operate with is an orphan branch, so as to avoid the confusing
error: "No branch named...".
If we are asked to operate with an orphan branch in a different working
tree than the current one, we need to check the HEAD in that different
working tree.
Let's extend the check we did in bcfc82bd48, to check the HEADs in all
worktrees linked to the current repository, using the helper introduced
in 31ad6b61bd (branch: add branch_checked_out() helper, 2022-06-15).
The helper, branch_checked_out(), does its work obtaining internally a
list of worktrees linked to the current repository. Obtaining that list
is not a lightweight work because it implies disk access.
In copy_or_rename_branch() we already have a list of worktrees. Let's
use that already obtained list, and avoid using here the helper.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Obtaining the list of worktrees, using get_worktrees(), is not a
lightweight operation, because it involves reading from disk.
Let's stop calling get_worktrees() in reject_rebase_or_bisect_branch()
and in replace_each_worktree_head_symref(). Make them receive the list
of worktrees from their only caller, copy_or_rename_branch().
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we introduced replace_each_worktree_head_symref() in 70999e9cec
(branch -m: update all per-worktree HEADs, 2016-03-27), we implemented a
best effort approach.
If we are asked to rename a branch that is simultaneously checked out in
multiple worktrees, we try to update all of those worktrees. If we fail
updating any of them, we die() as a signal that something has gone
wrong. However, at this point, the branch ref has already been renamed
and also updated the HEADs of the successfully updated worktrees.
Despite returning an error, we do not try to rollback those changes.
Let's add a test to notice if we change this behavior in the future.
In next commits we will change replace_each_worktree_head_symref() to
work more closely with its only caller, copy_or_rename_branch(). Let's
move the former closer to its caller, to facilitate those changes.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of the new option is to accommodate users who would like
--rebase-merges to be on by default and to facilitate turning on
--rebase-merges by default without configuration in a future version of
Git.
Name the new option rebase.rebaseMerges, even though it is a little
redundant, for consistency with the name of the command line option and
to be clear when scrolling through values in the [rebase] section of
.gitconfig.
Support setting rebase.rebaseMerges to the nonspecific value "true" for
users who don't need to or don't want to learn about the difference
between rebase-cousins and no-rebase-cousins.
Make --rebase-merges without an argument on the command line override
any value of rebase.rebaseMerges in the configuration, for consistency
with other command line flags with optional arguments that have an
associated config option.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unusual syntax --rebase-merges="" (that is, --rebase-merges with an
empty string argument) has been an undocumented synonym of
--rebase-merges without an argument. Deprecate that syntax to avoid
confusion when a rebase.rebaseMerges config option is introduced, where
rebase.rebaseMerges="" will be equivalent to --no-rebase-merges.
It is not likely that anyone is actually using this syntax, but just in
case, deprecate the empty string argument instead of dropping support
for it immediately.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c3b58472be (pack-redundant: gauge the usage before proposing its
removal, 2020-08-25), we added a big, ugly warning when pack-redundant
is run. The plan there indicated that we would ratchet that up to an
error before finally removing it. Since it has been 2.5 years (and 9
releases) since then, let's continue with the plan.
Note that we did get one bite on the warning, which was somebody asking
about alternatives:
https://lore.kernel.org/git/CAKvOHKAFXQwt4D8yUCCkf_TQL79mYaJ=KAKhtpDNTvHJFuX1NA@mail.gmail.com/
but we didn't undo the ugly warning (and the advice continues to be "use
repack -d" instead).
There was also some discussion around the time of the deprecation that
pack-redundant was invoked by the bitbake tool, and it still seems to do
so now:
https://git.openembedded.org/bitbake
That use should probably just go away in favor of an occasional repack
(which probably even happens via auto-gc after fetch these days).
But since neither of those data points caused us to cancel the
deprecation plan by dropping the warning, it seems like we should
proceed with the next step.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the comment above the function indicates, we do not bother actually
storing commit messages in our anonymization map. But we still take the
message as a parameter, and just ignore it. Let's stop doing that, which
will make -Wunused-parameter happier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The anonymization code has a specific generator callback for each type
of data (e.g., one for paths, one for oids, and so on). These all take a
"data" parameter, but none of them use it for anything. Which is not
surprising, as the point is to generate a new name independent of any
input, and each function keeps its own static counter.
We added the extra pointer in d5bf91fde4 (fast-export: add a "data"
callback parameter to anonymize_str(), 2020-06-23) to handle
--anonymize-map parsing, but that turned out to be awkward itself, and
was recently dropped.
So let's get rid of this "data" parameter that nobody is using, both
from the generators and from anonymize_str() which plumbed it through.
This simplifies the code, and makes -Wunused-parameter happier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we handle an --anonymize-map option, we parse the orig/anon pair,
and then feed the "orig" string to anonymize_str(), along with a
generator function that duplicates the "anon" string to be cached in the
map.
This works, because anonymize_str() says "ah, there is no mapping yet
for orig; I'll add one from the generator". But there are some
downsides:
1. It's a bit too clever, as it's not obvious what the code is trying
to do or why it works.
2. It requires allowing generator functions to take an extra void
pointer, which is not something any of the normal callers of
anonymize_str() want.
3. It does the wrong thing if the same token is provided twice.
When there are conflicting options, like:
git fast-export --anonymize \
--anonymize-map=foo:one \
--anonymize-map=foo:two
we usually let the second one override the first. But by using
anonymize_str(), which has first-one-wins logic, we do the
opposite.
So instead of relying on anonymize_str(), let's directly add the entry
ourselves. We can tweak the tests to show that we handle overridden
options correctly now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When anonymizing output, there's only one spot where we generate new
entries to add to our hashmap: when anonymize_str() doesn't find an
entry, we use the generate() callback to make one and add it. Let's pull
that into its own function in preparation for another caller.
Note that we'll add one extra feature. In anonymize_str(), we know that
we won't find an existing entry in the hashmap (since it will only try
to add after failing to find one). But other callers won't have the same
behavior, so we should catch this case and free the now-dangling entry.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We take pains to avoid doing a lookup on a hashmap which has not been
initialized with hashmap_init(). That was necessary back when this code
was written. But hashmap_get() became safer in b7879b0ba6 (hashmap:
allow re-use after hashmap_free(), 2020-11-02). Since then it's OK to
call functions on a zero-initialized table; it will just correctly
return NULL, since there is no match.
This simplifies the code a little, and also lets us keep the
initialization line closer to when we add an entry (which is when the
hashmap really does need to be totally initialized). That will help
later refactoring.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store anonymized values as pointers to "const char *", since they are
conceptually const to callers who use them. But they are actually
allocated strings whose memory is owned by the struct.
The ownership mismatch hasn't been a big deal since we never free() them
(they are held until the program ends), but let's switch them to "char *"
in preparation for changing that.
Since most code only accesses them via anonymize_str(), it can continue
to narrow them to "const char *" in its return value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" that responds to "git push" requests failed to
clean a stale lockfile when killed in the middle, which has been
corrected.
* ps/receive-pack-unlock-before-die:
receive-pack: fix stale packfile locks when dying
Fix for a "ls-files --format="%(path)" that produced nonsense
output, which was a bug in 2.38.
* aj/ls-files-format-fix:
ls-files: fix "--format" output of relative paths
