Doc update.
* ja/doc-cleanup:
init doc: --shared=0xxx does not give umask but perm bits
doc: git-init: clarify file modes in octal.
doc: git-http-push: describe the refs as pattern pairs
doc: uniformize <URL> placeholders' case
doc: use three dots for indicating repetition instead of star
doc: git-ls-files: express options as optional alternatives
doc: use only hyphens as word separators in placeholders
doc: express grammar placeholders between angle brackets
doc: split placeholders as individual tokens
doc: fix git credential synopsis
Code clean-up to eventually allow information on remotes defined
for an arbitrary repository to be read.
* gc/remote-with-fewer-static-global-variables:
remote: die if branch is not found in repository
remote: remove the_repository->remote_state from static methods
remote: use remote_state parameter internally
remote: move static variables into per-repository struct
t5516: add test case for pushing remote refspecs
Ensure that the sparseness of the in-core index matches the
index.sparse configuration specified by the repository immediately
after the on-disk index file is read.
* vd/sparse-sparsity-fix-on-read:
sparse-index: update do_read_index to ensure correct sparsity
sparse-index: add ensure_correct_sparsity function
sparse-index: avoid unnecessary cache tree clearing
test-read-cache.c: prepare_repo_settings after config init
The clean/smudge conversion code path has been prepared to better
work on platforms where ulong is narrower than size_t.
* mc/clean-smudge-with-llp64:
clean/smudge: allow clean filters to process extremely large files
odb: guard against data loss checking out a huge file
git-compat-util: introduce more size_t helpers
odb: teach read_blob_entry to use size_t
t1051: introduce a smudge filter test for extremely large files
test-lib: add prerequisite for 64-bit platforms
test-tool genzeros: generate large amounts of data more efficiently
test-genzeros: allow more than 2G zeros in Windows
Make a few helper functions unused and then lose them.
* ab/sh-retire-helper-functions:
git-sh-setup: remove "sane_grep", it's not needed anymore
git-sh-setup: remove unused sane_egrep() function
git-instaweb: unconditionally assume that gitweb is mod_perl capable
Makefile: remove $(NO_CURL) from $(SCRIPT_DEFINES)
Makefile: remove $(GIT_VERSION) from $(SCRIPT_DEFINES)
Makefile: move git-SCRIPT-DEFINES adjacent to $(SCRIPT_DEFINES)
The command line complation for "git send-email" options have been
tweaked to make it easier to keep it in sync with the command itself.
* tp/send-email-completion:
send-email docs: add format-patch options
send-email: programmatically generate bash completions
The compatibility implementation for unsetenv(3) were written to
mimic ancient, non-POSIX, variant seen in an old glibc; it has been
changed to return an integer to match the more modern era.
* jc/unsetenv-returns-an-int:
unsetenv(3) returns int, not void
Things like "git -c branch.sort=bogus branch new HEAD", i.e. the
operation modes of the "git branch" command that do not need the
sort key information, no longer errors out by seeing a bogus sort
key.
* jc/fix-ref-sorting-parse:
for-each-ref: delay parsing of --sort=<atom> options
"git stash" learned the "--staged" option to stash away what has
been added to the index (and nothing else).
* so/stash-staged:
stash: get rid of unused argument in stash_staged()
stash: implement '--staged' option for 'push' and 'save'
Teach and encourage first-time contributors to this project to
state the base commit when they submit their topic.
* jc/tutorial-format-patch-base:
MyFirstContribution: teach to use "format-patch --base=auto"
The "remainder" of hn/refs-errno-cleanup topic.
* ab/refs-errno-cleanup: (21 commits)
refs API: post-migration API renaming [2/2]
refs API: post-migration API renaming [1/2]
refs API: don't expose "errno" in run_transaction_hook()
refs API: make expand_ref() & repo_dwim_log() not set errno
refs API: make resolve_ref_unsafe() not set errno
refs API: make refs_ref_exists() not set errno
refs API: make refs_resolve_refdup() not set errno
refs tests: ignore ignore errno in test-ref-store helper
refs API: ignore errno in worktree.c's find_shared_symref()
refs API: ignore errno in worktree.c's add_head_info()
refs API: make files_copy_or_rename_ref() et al not set errno
refs API: make loose_fill_ref_dir() not set errno
refs API: make resolve_gitlink_ref() not set errno
refs API: remove refs_read_ref_full() wrapper
refs/files: remove "name exist?" check in lock_ref_oid_basic()
reflog tests: add --updateref tests
refs API: make refs_rename_ref_available() static
refs API: make parse_loose_ref_contents() not set errno
refs API: make refs_read_raw_ref() not set errno
refs API: add a version of refs_resolve_ref_unsafe() with "errno"
...
Allow "git status --porcelain=v2" to show the number of stash
entries with --show-stash like the normal output does.
* ow/stash-count-in-status-porcelain-output:
status: print stash info with --porcelain=v2 --show-stash
status: count stash entries in separate function
Treat "_" as any other URL-valid characters in an URL when matching
the per-URL configuration variable names.
* jk/loosen-urlmatch:
urlmatch: add underscore to URL_HOST_CHARS
Unless `command_requires_full_index` forces index expansion, ensure in-core
index sparsity matches config settings on read by calling
`ensure_correct_sparsity`. This makes the behavior of the in-core index more
consistent between different methods of updating sparsity: manually changing
the `index.sparse` config setting vs. executing
`git sparse-checkout --[no-]sparse-index init`
Although index sparsity is normally updated with `git sparse-checkout init`,
ensuring correct sparsity after a manual `index.sparse` change has some
practical benefits:
1. It allows for command-by-command sparsity toggling with
`-c index.sparse=<true|false>`, e.g. when troubleshooting issues with the
sparse index.
2. It prevents users from experiencing abnormal slowness after setting
`index.sparse` to `true` due to use of a full index in all commands until
the on-disk index is updated.
Helped-by: Junio C Hamano <gitster@pobox.com>
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `ensure_correct_sparsity` function is intended to provide a means of
aligning the in-core index with the sparsity required by the repository
settings and other properties of the index. The function first checks
whether a sparse index is allowed (per repository & sparse checkout pattern
settings). If the sparse index may be used, the index is converted to
sparse; otherwise, it is explicitly expanded with `ensure_full_index`.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When converting a full index to sparse, clear and recreate the cache tree
only if the cache tree is not fully valid. The convert_to_sparse operation
should exit silently if a cache tree update cannot be successfully completed
(e.g., due to a conflicted entry state). However, because this failure
scenario only occurs when at least a portion of the cache tree is invalid,
we can save ourselves the cost of clearing and recreating the cache tree by
skipping the check when the cache tree is fully valid.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move `prepare_repo_settings` after the git directory has been set up in
`test-read-cache.c`. The git directory settings must be initialized to
properly assign repo settings using the worktree-level git config.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with versions of PCREv2 library older
than 10.34 in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
This reverts commit f6526728f9.
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with certain versions of PCREv2
library in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
This reverts commit ae39ba431a, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit, we would like external-facing functions to be
able to accept "struct repository" and "struct branch" as a pair. This
is useful for functions like pushremote_for_branch(), which need to take
values from the remote_state and branch, even if branch == NULL.
However, a caller may supply an unrelated repository and branch, which
is not supported behavior.
To prevent misuse, add a die_on_missing_branch() helper function that
dies if a given branch is not from a given repository. Speed up the
existence check by replacing the branches list with a branches_hash
hashmap.
Like read_config(), die_on_missing_branch() is only called from
non-static functions; static functions are less prone to misuse because
they have strong conventions for keeping remote_state and branch in
sync.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace all remaining references of the_repository->remote_state in
static functions with a struct remote_state parameter.
To do so, move read_config() calls to non-static functions and create a
family of static functions, "remotes_*", that behave like "repo_*", but
accept struct remote_state instead of struct repository. In the case
where a static function calls a non-static function, replace the
non-static function with its "remotes_*" equivalent.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without changing external-facing functions, replace
the_repository->remote_state internally by adding a struct remote_state
parameter.
As a result, external-facing functions are still tied to the_repository,
but most static functions no longer reference
the_repository->remote_state. The exceptions are those that are used in
a way that depends on external-facing functions e.g. the callbacks to
remote_get_1().
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote.c does not works with non-the_repository because it stores its
state as static variables. To support non-the_repository, we can use a
per-repository struct for the remotes subsystem.
Prepare for this change by defining a struct remote_state that holds
the remotes subsystem state and move the static variables of remote.c
into the_repository->remote_state.
This introduces no behavioral or API changes.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push remote-name" (that is, with no refspec given on the command
line) should push the refspecs in remote.remote-name.push. There is no
test case that checks this behavior in detached HEAD, so add one.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The already-up-to-date pull bug was fixed for --ff-only but it did not
include the case where --ff or --ff-only are not specified. This updates
the --ff-only fix to include the case where --ff or --ff-only are not
specified in command line flags or config.
Signed-off-by: Erwin Villejo <erwin.villejo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A superfluous ']' was added to the title of the GitHub CI section in
f003a91f5c (SubmittingPatches: replace discussion of Travis with GitHub
Actions, 2021-07-22). Remove it.
While at it, format the URL for a GitHub user's workflow runs of Git
between backticks, since if not Asciidoc formats only the first part,
"https://github.com/<Your", as a link, which is not very useful.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking typos in file "po/ko.po", "git-po-helper" reports lots of
false positives because there are no spaces between ASCII and Korean
characters. After applied commit adee197 "(dict: add smudge table for
Korean language, 2021-11-11)" of "git-l10n/git-po-helper" to suppress
these false positives, some easy-to-fix typos are found and fixed.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
