Teach the recently invented "password expiry time" trait to the
wincred credential helper.
* mh/credential-password-expiry-wincred:
credential/wincred: store password_expiry_utc
The implementation of credential helpers used fgets() over fixed
size buffers to read protocol messages, causing the remainder of
the folded long line to trigger unexpected behaviour, which has
been corrected.
* tb/credential-long-lines:
contrib/credential: embiggen fixed-size buffer in wincred
contrib/credential: avoid fixed-size buffer in libsecret
contrib/credential: .gitignore libsecret build artifacts
contrib/credential: remove 'gnome-keyring' credential helper
contrib/credential: avoid fixed-size buffer in osxkeychain
t/lib-credential.sh: ensure credential helpers handle long headers
credential.c: store "wwwauth[]" values in `credential_read()`
The documentation at e75d1da38a claimed support, but it was never present
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script used to use bare "read" without the "-r"
option to read the contents of various state files, which risked
getting confused with backslashes in them. This has been
corrected.
* ek/completion-use-read-r-to-read-literally:
completion: suppress unwanted unescaping of `read`
As in previous commits, harden the wincred credential helper against the
aforementioned protocol injection attack.
Unlike the approached used for osxkeychain and libsecret, where a
fixed-size buffer was replaced with `getline()`, we must take a
different approach here. There is no `getline()` equivalent in Windows,
and the function is not available to us with ordinary compiler settings.
Instead, allocate a larger (still fixed-size) buffer in which to process
each line. The value of 100 KiB is chosen to match the maximum-length
header that curl will allow, CURL_MAX_HTTP_HEADER.
To ensure that we are reading complete lines at a time, and that we
aren't susceptible to a similar injection attack (albeit with more
padding), ensure that each read terminates at a newline (i.e., that no
line is more than 100 KiB long).
Note that it isn't sufficient to turn the old loop into something like:
while (len && strchr("\r\n", buf[len - 1])) {
buf[--len] = 0;
ends_in_newline = 1;
}
because if an attacker sends something like:
[aaaaa.....]\r
host=example.com\r\n
the credential helper would fill its buffer after reading up through the
first '\r', call fgets() again, and then see "host=example.com\r\n" on
its line.
Note that the original code was written in a way that would trim an
arbitrary number of "\r" and "\n" from the end of the string. We should
get only a single "\n" (since the point of `fgets()` is to return the
buffer to us when it sees one), and likewise would not expect to see
more than one associated "\r". The new code trims a single "\r\n", which
matches the original intent.
[1]: https://curl.se/libcurl/c/CURLOPT_HEADERFUNCTION.html
Tested-by: Matthew John Cheetham <mjcheetham@outlook.com>
Helped-by: Matthew John Cheetham <mjcheetham@outlook.com>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The libsecret credential helper reads the newline-delimited
protocol stream one line at a time by repeatedly calling fgets() into a
fixed-size buffer, and is thus affected by the vulnerability described
in the previous commit.
To mitigate this attack, avoid using a fixed-size buffer, and instead
rely on getline() to allocate a buffer as large as necessary to fit the
entire content of the line, preventing any protocol injection.
In most parts of Git we don't assume that every platform has getline().
But libsecret is primarily used on Linux, where we do already assume it
(using a knob in config.mak.uname). POSIX also added getline() in 2008,
so we'd expect other recent Unix-like operating systems to have it
(e.g., FreeBSD also does).
Note that the buffer was already allocated on the heap in this case, but
we'll swap `g_free()` for `free()`, since it will now be allocated by
the system `getline()`, rather than glib's `g_malloc()`.
Tested-by: Jeff King <peff@peff.net>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The libsecret credential helper does not mark its build artifact as
ignored, so running "make" results in a dirty working tree.
Mark the "git-credential-libsecret" binary as ignored to avoid the above.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
libgnome-keyring was deprecated in 2014 (in favor of libsecret), more
than nine years ago [1].
The credential helper implemented using libgnome-keyring has had a small
handful of commits since 2013, none of which implemented or changed any
functionality. The last commit to do substantial work in this area was
15f7221686 (contrib/git-credential-gnome-keyring.c: support really
ancient gnome-keyring, 2013-09-23), just shy of nine years ago.
This credential helper suffers from the same `fgets()`-related injection
attack (using the new "wwwauth[]" feature) as in the previous commit.
Instead of patching it, let's remove this helper as deprecated.
[1]: https://mail.gnome.org/archives/commits-list/2014-January/msg01585.html
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macOS Keychain-based credential helper reads the newline-delimited
protocol stream one line at a time by repeatedly calling fgets() into a
fixed-size buffer, and is thus affected by the vulnerability described
in the previous commit.
To mitigate this attack, avoid using a fixed-size buffer, and instead
rely on getline() to allocate a buffer as large as necessary to fit the
entire content of the line, preventing any protocol injection.
We solved a similar problem in a5bb10fd5e (config: avoid fixed-sized
buffer when renaming/deleting a section, 2023-04-06) by switching to
strbuf_getline(). We can't do that here because the contrib helpers do
not link with the rest of Git, and so can't use a strbuf. But we can use
the system getline() directly, which works similarly.
In most parts of Git we don't assume that every platform has getline().
But this helper is run only on OS X, and that platform added support in
10.7 ("Lion") which was released in 2011.
Tested-by: Taylor Blau <me@ttaylorr.com>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These practices largely reflect what we are already doing on the mailing
list, which should help new Coccinelle authors and reviewers get up to
speed.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Drop "examples" since we actually use the patches.
- Drop sentences that could be headings instead
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `__git_eread`, which reads the first line from the file,
calls the `read` builtin without passing the flag option `-r`. When
the `read` builtin is called without the flag `-r`, it processes the
backslash escaping in the text that it reads. For this reason, it is
generally considered the best practice to always use the `read`
builtin with flag `-r` unless one intensionally processes the
backslash escaping. For the present case in git-prompt.sh, in fact,
all the occurrences of the calls of `__git_eread` intend to read the
literal content of the first lines.
To make it read the first line literally, pass the flag `-r` to the
`read` builtin in the function `__git_eread`.
Signed-off-by: Edwin Kofler <edwin@kofler.dev>
Signed-off-by: Koichi Murase <myoga.murase@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'unused.cocci' was added in 4f40f6cb73 (cocci: add and apply a
rule to find "unused" strbufs, 2022-07-05) it found three unused
strbufs, and when it was generalized in the next commit it managed to
find an unused string_list as well. That's four unused variables in
over 17 years, so apparently we rarely make this mistake.
Unfortunately, applying 'unused.cocci' is quite expensive, e.g. it
increases the from-scratch runtime of 'make coccicheck' by over 5:30
minutes or over 160%:
$ make -s cocciclean
$ time make -s coccicheck
* new spatch flags
real 8m56.201s
user 0m0.420s
sys 0m0.406s
$ rm contrib/coccinelle/unused.cocci contrib/coccinelle/tests/unused.*
$ make -s cocciclean
$ time make -s coccicheck
* new spatch flags
real 3m23.893s
user 0m0.228s
sys 0m0.247s
That's a lot of runtime spent for not much in return, and arguably an
unused struct instance sneaking in is not that big of a deal to
justify the significantly increased runtime.
Remove 'unused.cocci', because we are not getting our CPU cycles'
worth.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
This attribute is important when storing OAuth credentials which may
expire after as little as one hour. d208bfdf (credential: new attribute
password_expiry_utc, 2023-02-18) added support for this attribute in
general so that individual credential backend like wincred can use it.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lift the limitation that colored prompts can only be used with
PROMPT_COMMAND mode.
* fc/completion-colors-do-not-need-prompt-command:
completion: prompt: use generic colors
Apply the part of "the_repository.pending.cocci" pertaining to
"revision.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"rerere.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"refs.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"promisor-remote.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"packfile.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"pretty.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"diff.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit-reach.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of diff.h, rerere.h and revision.h the macros were added
in [1], [2] and [3] when "the_repository.pending.cocci" didn't
exist. None of the subsequently added migration rules covered
them. Let's add those missing rules.
In the case of macros in "cache.h", "commit.h", "packfile.h",
"promisor-remote.h" and "refs.h" those aren't guarded by
"NO_THE_REPOSITORY_COMPATIBILITY_MACROS", but they're also macros that
add "the_repository" as the first argument, so we should migrate away
from them.
1. 2abf350385 (revision.c: remove implicit dependency on the_index,
2018-09-21)
2. e675765235 (diff.c: remove implicit dependency on the_index,
2018-09-21)
3. 35843b1123 (rerere.c: remove implicit dependency on the_index,
2018-09-21)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sort the "the_repository.pending.cocci" file by which header the
macros are in, and add a comment to that effect in front of the
rules. This will make subsequent commits easier to follow, as we'll be
applying these rules on a header-by-header basis.
Once we've fully applied "the_repository.pending.cocci" we'll keep
this rules around for a while in "the_repository.cocci", to help any
outstanding topics and out-of-tree code to resolve textual or semantic
conflicts with these changes, but eventually we'll remove the
"the_repository.cocci" as a follow-up.
So even if some of these functions are subsequently moved and/or split
into other or new headers there's no risk of this becoming stale, if
and when that happens the we should be removing these rules anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When these rules started being added in [1] they didn't use a ";"
after the ")", and would thus catch uses of these macros within
expressions. But as of [2] the new additions were broken in that
they'd only match a subset of the users of these macros.
Rather than narrowly fixing that, let's have these use the much less
verbose pattern introduced in my recent [3]: There's no need to
exhaustively enumerate arguments if we use the "..." syntax. This
means that we can fold all of these different rules into one.
1. afd69dcc21 (object-store: prepare read_object_file to deal with
any repo, 2018-11-13)
2. 21a9651ba3 (commit-reach: prepare get_merge_bases to handle any
repo, 2018-11-13)
3. 0e6550a2c6 (cocci: add a index-compatibility.pending.cocci,
2022-11-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "parse_commit_gently" macro went away in [1], so we don't need to
carry this for its migration.
1. ea3f7e598c (revision: use repository from rev_info when parsing
commits, 2020-06-23)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delete redundant definitions. Mingw-w64 has wincred.h since 2007 [1].
[1] 9d937a7f4f/mingw-w64-headers/include/wincred.h
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the prompt command mode was introduced in 1bfc51ac81 (Allow
__git_ps1 to be used in PROMPT_COMMAND, 2012-10-10), the assumption was
that it was necessary in order to properly add colors to PS1 in bash,
but this wasn't true.
It's true that the \[ \] markers add the information needed to properly
calculate the width of the prompt, and they have to be added directly to
PS1, a function returning them doesn't work.
But that is because bash coverts the \[ \] markers in PS1 to \001 \002,
which is what readline ultimately needs in order to calculate the width.
We don't need bash to do this conversion, we can use \001 \002
ourselves, and then the prompt command mode is not necessary to display
colors.
This is what functions returning colors are supposed to do [1].
[1] http://mywiki.wooledge.org/BashFAQ/053
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Tested-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the list of files as input was implemented in 6508eedf67
(t/aggregate-results: accomodate systems with small max argument list
length, 2010-06-01), a much simpler solution wasn't considered.
Let's just pass the directory as an argument.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the last users of "USE_THE_INDEX_COMPATIBILITY_MACROS" use the
underlying *_index() variants instead. Now all previous users of
"USE_THE_INDEX_COMPATIBILITY_MACROS" have been migrated away from the
wrapper macros, and if applicable to use the "USE_THE_INDEX_VARIABLE"
added in [1].
Let's leave the "index-compatibility.cocci" in place, even though it
won't be doing anything on "master". It will benefit any out-of-tree
code that need to use these compatibility macros. We can eventually
remove it.
1. bdafeae0b9 (cache.h & test-tool.h: add & use
"USE_THE_INDEX_VARIABLE", 2022-11-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the redundant update_main_cache_tree() function, and make its
users use cache_tree_update() instead.
The behavior of populating the "the_index.cache_tree" if it wasn't
present already was needed when this function was introduced in [1],
but it hasn't been needed since [2]; The "cache_tree_update()" will
now lazy-allocate, so there's no need for the wrapper.
1. 996277c520 (Refactor cache_tree_update idiom from commit,
2011-12-06)
2. fb0882648e (cache-tree: clean up cache_tree_update(), 2021-01-23)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a trivial rule for "write_cache_as_tree" to
"index-compatibility.cocci", and apply it. This was left out of the
rules added in 0e6550a2c6 (cocci: add a
index-compatibility.pending.cocci, 2022-11-19) because this
compatibility wrapper lived in "cache-tree.h", not "cache.h"
But it's like the other "USE_THE_INDEX_COMPATIBILITY_MACROS", so let's
migrate it too.
The replacement of "USE_THE_INDEX_COMPATIBILITY_MACROS" here with
"USE_THE_INDEX_VARIABLE" is a manual change on top, now that these
files only use "&the_index", and don't need any compatibility
macros (or functions).
The wrapping of some argument lists is likewise manual, as coccinelle
would otherwise give us overly long argument lists.
The reason for putting the "O" in the cocci rule on the "-" and "+"
lines is because I couldn't get correct whitespacing otherwise,
i.e. I'd end up with "oid,&the_index", not "oid, &the_index".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the rule added in [1] to change "cache_name_pos" to
"index_name_pos", which allows us to get rid of another
"USE_THE_INDEX_COMPATIBILITY_MACROS" macro.
The replacement of "USE_THE_INDEX_COMPATIBILITY_MACROS" here with
"USE_THE_INDEX_VARIABLE" is a manual change on top, now that these
files only use "&the_index", and don't need any compatibility
macros (or functions).
1. 0e6550a2c6 (cocci: add a index-compatibility.pending.cocci,
2022-11-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the "active_nr" part of "index-compatibility.pending.cocci",
which was left out in [1] due to an in-flight conflict. As of [2] the
topic we conflicted with has been merged to "master", so we can fully
apply this rule.
1. dc594180d9 (cocci & cache.h: apply variable section of "pending"
index-compatibility, 2022-11-19)
2. 9ea1378d04 (Merge branch 'ab/various-leak-fixes', 2022-12-14)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for replace ALLOC_ARRAY+COPY_ARRAY with DUP_ARRAY
to reduce code duplication and apply its results.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a case insensitive mode to the Bash completion helpers.
* aw/complete-case-insensitive:
completion: add case-insensitive match of pseudorefs
completion: add optional ignore-case when matching refs
"git jump" (in contrib/) learned to present the "quickfix list" to
its standard output (instead of letting it consumed by the editor
it invokes), and learned to also drive emacs/emacsclient.
* yn/git-jump-emacs:
git-jump: invoke emacs/emacsclient
git-jump: move valid-mode check earlier
git-jump: add an optional argument '--stdout'
Since [1] running "make coccicheck" has resulted in [2] being emitted
to the *.log files for the "spatch" run, and in the case of "make
coccicheck-test" we'd emit these to the user's terminal.
Nothing was broken as a result, but let's refactor the relevant rules
to eliminate the ambiguity between a possible variable and an
identifier.
1. 0e6550a2c6 (cocci: add a index-compatibility.pending.cocci,
2022-11-19)
2. warning: line 257: should active_cache be a metavariable?
warning: line 260: should active_cache_changed be a metavariable?
warning: line 263: should active_cache_tree be a metavariable?
warning: line 271: should active_nr be a metavariable?
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When GIT_COMPLETION_IGNORE_CASE is set, also allow lowercase completion
text like "head" to match uppercase HEAD and other pseudorefs.
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_COMPLETION_IGNORE_CASE is set, --ignore-case will be added to
git for-each-ref calls so that refs can be matched case insensitively,
even when running on case sensitive filesystems.
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It works with GIT_EDITOR="emacs", "emacsclient" or "emacsclient -t"
Signed-off-by: Yoichi Nakayama <yoichi.nakayama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check if the "mode" argument supplied by the user is valid by seeing
if we have a mode_$mode function defined. But we don't do that until
after creating the tempfile. This is wasteful (we create a tempfile but
never use it), and makes it harder to add new options (the recent stdout
option exits before creating the tempfile, so it misses the check and
"git jump --stdout foo" will produce "git-jump: 92: mode_foo: not found"
rather than the regular usage message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make coccicheck" is time consuming. It has been made to run more
incrementally.
* ab/coccicheck-incremental:
Makefile: don't create a ".build/.build/" for cocci, fix output
spatchcache: add a ccache-alike for "spatch"
cocci: run against a generated ALL.cocci
cocci rules: remove <id>'s from rules that don't need them
Makefile: copy contrib/coccinelle/*.cocci to build/
cocci: optimistically use COMPUTE_HEADER_DEPENDENCIES
cocci: make "coccicheck" rule incremental
cocci: split off "--all-includes" from SPATCH_FLAGS
cocci: split off include-less "tests" from SPATCH_FLAGS
Makefile: split off SPATCH_BATCH_SIZE comment from "cocci" heading
Makefile: have "coccicheck" re-run if flags change
Makefile: add ability to TAB-complete cocci *.patch rules
cocci rules: remove unused "F" metavariable from pending rule
Makefile + shared.mak: rename and indent $(QUIET_SPATCH_T)
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a coccinelle rule which covers the rest of the macros guarded by
"USE_THE_INDEX_COMPATIBILITY_MACROS" cache.h. If the result of this
were applied it can be reduced down to just:
#ifdef USE_THE_INDEX_COMPATIBILITY_MACROS
extern struct index_state the_index;
#endif
But that patch is just under 2000 lines, so let's first add this as a
"pending", and then incrementally pick changes from it in subsequent
commits. In doing that we'll migrate rules from this
"index-compatibility.pending.cocci" to the "index-compatibility.cocci"
created in a preceding commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Address the root cause of technical debt we've been carrying since
sha1collisiondetection was made the default in [1]. In a preceding
commit we narrowly fixed a bug where the "DC_SHA1" variable would be
unset (in combination with "NO_APPLE_COMMON_CRYPTO=" on OSX), even
though we had the sha1collisiondetection library enabled.
But the only reason we needed to have such a user-exposed knob went
away with [1], and it's been doing nothing useful since then. We don't
care if you define DC_SHA1=*, we only care that you don't ask for any
other SHA-1 implementation. If it turns out that you didn't, we'll use
sha1collisiondetection, whether you had "DC_SHA1" set or not.
As a result of this being confusing we had e.g. [2] for cmake and the
recent [3] for ci/lib.sh setting "DC_SHA1" explicitly, even though
this was always a NOOP.
A much simpler way to do this is to stop having the Makefile and
CMakeLists.txt set "DC_SHA1" to be picked up by the test-lib.sh, let's
instead add a trivial "test-tool sha1-is-sha1dc". It returns zero if
we're using sha1collisiondetection, non-zero otherwise.
1. e6b07da278 (Makefile: make DC_SHA1 the default, 2017-03-17)
2. c4b2f41b5f (cmake: support for testing git with ctest, 2020-06-26)
3. 1ad5c3df35 (ci: use DC_SHA1=YesPlease on osx-clang job for CI,
2022-10-20)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add a rather trivial "spatchcache", with this running e.g.:
make cocciclean
make contrib/coccinelle/free.cocci.patch \
SPATCH=contrib/coccicheck/spatchcache \
SPATCH_FLAGS=--very-quiet
Is cut down from ~20s to ~5s on my system. Much of that is either
fixable shell overhead, or the around 40 files we "CANTCACHE" (see the
implementation).
This uses "redis" as a cache by default, but it's configurable. See
the embedded documentation.
This is *not* like ccache in that we won't cache failed spatch
invocations, or those where spatch suggests changes for us. Those
cases are so rare that I didn't think it was worth the bother, by far
the most common case is that it has no suggested changes. We'll also
refuse to cache any "spatch" invocation that has output on stderr,
which means that "--very-quiet" must be added to "SPATCH_FLAGS".
Because we narrow the cache to that we don't need to save away stdout,
stderr & the exit code. We simply cache the cases where we had no
suggested changes.
Another benchmark is to compare this with the previous
SPATCH_BATCH_SIZE=N, as noted in [1]. Before this (on my 8 core system) running:
make clean; time make contrib/coccinelle/array.cocci.patch SPATCH_BATCH_SIZE=0
Would take 33s, but with the preceding changes running without this
"spatchcache" is slightly slower, or around 35s:
make clean; time make contrib/coccinelle/array.cocci.patch
Now doing the same with SPATCH=contrib/coccinelle/spatchcache will
take around 6s, but we'll need to compile the *.o files first to take
full advantage of it (which can be fast with "ccache"):
make clean; make; time make contrib/coccinelle/array.cocci.patch SPATCH=contrib/coccinelle/spatchcache
1. https://lore.kernel.org/git/YwdRqP1CyUAzCEn2@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The preceding commits to make the "coccicheck" target incremental made
it slower in some cases. As an optimization let's not have the
many=many mapping of <*.cocci>=<*.[ch]>, but instead concat the
<*.cocci> into an ALL.cocci, and then run one-to-many
ALL.cocci=<*.[ch]>.
A "make coccicheck" is now around 2x as fast as it was on "master",
and around 1.5x as fast as the preceding change to make the run
incremental:
$ git hyperfine -L rev origin/master,HEAD~,HEAD -p 'make clean' 'make coccicheck SPATCH=spatch COCCI_SOURCES="$(echo $(ls o*.c builtin/h*.c))"' -r 3
Benchmark 1: make coccicheck SPATCH=spatch COCCI_SOURCES="$(echo $(ls o*.c builtin/h*.c))"' in 'origin/master
Time (mean ± σ): 4.258 s ± 0.015 s [User: 27.432 s, System: 1.532 s]
Range (min … max): 4.241 s … 4.268 s 3 runs
Benchmark 2: make coccicheck SPATCH=spatch COCCI_SOURCES="$(echo $(ls o*.c builtin/h*.c))"' in 'HEAD~
Time (mean ± σ): 5.365 s ± 0.079 s [User: 36.899 s, System: 1.810 s]
Range (min … max): 5.281 s … 5.436 s 3 runs
Benchmark 3: make coccicheck SPATCH=spatch COCCI_SOURCES="$(echo $(ls o*.c builtin/h*.c))"' in 'HEAD
Time (mean ± σ): 2.725 s ± 0.063 s [User: 14.796 s, System: 0.233 s]
Range (min … max): 2.667 s … 2.792 s 3 runs
Summary
'make coccicheck SPATCH=spatch COCCI_SOURCES="$(echo $(ls o*.c builtin/h*.c))"' in 'HEAD' ran
1.56 ± 0.04 times faster than 'make coccicheck SPATCH=spatch COCCI_SOURCES="$(echo $(ls o*.c builtin/h*.c))"' in 'origin/master'
1.97 ± 0.05 times faster than 'make coccicheck SPATCH=spatch COCCI_SOURCES="$(echo $(ls o*.c builtin/h*.c))"' in 'HEAD~'
This can be turned off with SPATCH_CONCAT_COCCI, but as the
beneficiaries of "SPATCH_CONCAT_COCCI=" would mainly be those
developing the *.cocci rules themselves, let's leave this optimization
on by default.
For more information see my "Optimizing *.cocci rules by concat'ing
them" (<220901.8635dbjfko.gmgdl@evledraar.gmail.com>) on the
cocci@inria.fr mailing list.
This potentially changes the results of our *.cocci rules, but as
noted in that discussion it should be safe for our use. We don't name
rules, or if we do their names don't conflict across our *.cocci
files.
To the extent that we'd have any inter-dependencies between rules this
doesn't make that worse, as we'd have them now if we ran "make
coccicheck", applied the results, and would then have (due to
hypothetical interdependencies) suggested changes on the subsequent
"make coccicheck".
Our "coccicheck-test" target makes use of the ALL.cocci when running
tests, e.g. when testing unused.{c,out} we test it against ALL.cocci,
not unused.cocci. We thus assert (to the extent that we have test
coverage) that this concatenation doesn't change the expected results
of running these rules.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The <id> in the <rulename> part of the coccinelle syntax[1] is for our
purposes there to declares if we have inter-dependencies between
different rules.
But such <id>'s must be unique within a given semantic patch file. As
we'll be processing a concatenated version of our rules in the
subsequent commit let's remove these names. They weren't being used
for the semantic patches themselves, and equated to a short comment
about the rule.
Both the filename and context of the rules makes it clear what they're
doing, so we're not gaining anything from keeping these. Retaining
them goes against recommendations that "contrib/coccinelle/README"
will be making in the subsequent commit.
This leaves only one named rule in our sources, where it's needed for
a "<id> <-> <extends> <id>" relationship:
$ git -P grep '^@ ' -- contrib/coccinelle/
contrib/coccinelle/swap.cocci:@ swap @
contrib/coccinelle/swap.cocci:@ extends swap @
1. https://coccinelle.gitlabpages.inria.fr/website/docs/main_grammar.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Improve the incremental rebuilding support of "coccicheck" by
piggy-backing on the computed dependency information of the
corresponding *.o file, rather than rebuilding all <RULE>/<FILE> pairs
if either their corresponding file changes, or if any header changes.
This in effect uses the same method that the "sparse" target was made
to use in c234e8a0ec (Makefile: make the "sparse" target non-.PHONY,
2021-09-23), except that the dependency on the *.o file isn't a hard
one, we check with $(wildcard) if the *.o file exists, and if so we'll
depend on it.
This means that the common case of:
make
make coccicheck
Will benefit from incremental rebuilding, now changing e.g. a header
will only re-run "spatch" on those those *.c files that make use of
it:
By depending on the *.o we piggy-back on
COMPUTE_HEADER_DEPENDENCIES. See c234e8a0ec (Makefile: make the
"sparse" target non-.PHONY, 2021-09-23) for prior art of doing that
for the *.sp files. E.g.:
make contrib/coccinelle/free.cocci.patch
make -W column.h contrib/coccinelle/free.cocci.patch
Will take around 15 seconds for the second command on my 8 core box if
I didn't run "make" beforehand to create the *.o files. But around 2
seconds if I did and we have those "*.o" files.
Notes about the approach of piggy-backing on *.o for dependencies:
* It *is* a trade-off since we'll pay the extra cost of running the C
compiler, but we're probably doing that anyway. The compiler is much
faster than "spatch", so even though we need to re-compile the *.o to
create the dependency info for the *.c for "spatch" it's
faster (especially if using "ccache").
* There *are* use-cases where some would like to have *.o files
around, but to have the "make coccicheck" ignore them. See:
https://lore.kernel.org/git/20220826104312.GJ1735@szeder.dev/
For those users a:
make
make coccicheck SPATCH_USE_O_DEPENDENCIES=
Will avoid considering the *.o files.
* If that *.o file doesn't exist we'll depend on an intermediate file
of ours which in turn depends on $(FOUND_H_SOURCES).
This covers both an initial build, or where "coccicheck" is run
without running "all" beforehand, and because we run "coccicheck"
on e.g. files in compat/* that we don't know how to build unless
the requisite flag was provided to the Makefile.
Most of the runtime of "incremental" runs is now spent on various
compat/* files, i.e. we conditionally add files to COMPAT_OBJS, and
therefore conflate whether we *can* compile an object and generate
dependency information for it with whether we'd like to link it
into our binary.
Before this change the distinction didn't matter, but now one way
to make this even faster on incremental builds would be to peel
those concerns apart so that we can see that e.g. compat/mmap.c
doesn't depend on column.h.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Optimize the very slow "coccicheck" target to take advantage of
incremental rebuilding, and fix outstanding dependency problems with
the existing rule.
The rule is now faster both on the initial run as we can make better
use of GNU make's parallelism than the old ad-hoc combination of
make's parallelism combined with $(SPATCH_BATCH_SIZE) and/or the
"--jobs" argument to "spatch(1)".
It also makes us *much* faster when incrementally building, it's now
viable to "make coccicheck" as topic branches are merged down.
The rule didn't use FORCE (or its equivalents) before, so a:
make coccicheck
make coccicheck
Would report nothing to do on the second iteration. But all of our
patch output depended on all $(COCCI_SOURCES) files, therefore e.g.:
make -W grep.c coccicheck
Would do a full re-run, i.e. a a change in a single file would force
us to do a full re-run.
The reason for this (not the initial rationale, but my analysis) is:
* Since we create a single "*.cocci.patch+" we don't know where to
pick up where we left off, or how to incrementally merge e.g. a
"grep.c" change with an existing *.cocci.patch.
* We've been carrying forward the dependency on the *.c files since
63f0a758a0 (add coccicheck make target, 2016-09-15) the rule was
initially added as a sort of poor man's dependency discovery.
As we don't include other *.c files depending on other *.c files
has always been broken, as could be trivially demonstrated
e.g. with:
make coccicheck
make -W strbuf.h coccicheck
However, depending on the corresponding *.c files has been doing
something, namely that *if* an API change modified both *.c and *.h
files we'd catch the change to the *.h we care about via the *.c
being changed.
For API changes that happened only via *.h files we'd do the wrong
thing before this change, but e.g. for function additions (not
"static inline" ones) catch the *.h change by proxy.
Now we'll instead:
* Create a <RULE>/<FILE> pair in the .build directory, E.g. for
swap.cocci and grep.c we'll create
.build/contrib/coccinelle/swap.cocci.patch/grep.c.
That file is the diff we'll apply for that <RULE>-<FILE>
combination, if there's no changes to me made (the common case)
it'll be an empty file.
* Our generated *.patch
file (e.g. contrib/coccinelle/swap.cocci.patch) is now a simple "cat
$^" of all of all of the <RULE>/<FILE> files for a given <RULE>.
In the case discussed above of "grep.c" being changed we'll do the
full "cat" every time, so they resulting *.cocci.patch will always
be correct and up-to-date, even if it's "incrementally updated".
See 1cc0425a27 (Makefile: have "make pot" not "reset --hard",
2022-05-26) for another recent rule that used that technique.
As before we'll:
* End up generating a contrib/coccinelle/swap.cocci.patch, if we
"fail" by creating a non-empty patch we'll still exit with a zero
exit code.
Arguably we should move to a more Makefile-native way of doing
this, i.e. fail early, and if we want all of the "failed" changes
we can use "make -k", but as the current
"ci/run-static-analysis.sh" expects us to behave this way let's
keep the existing behavior of exhaustively discovering all cocci
changes, and only failing if spatch itself errors out.
Further implementation details & notes:
* Before this change running "make coccicheck" would by default end
up pegging just one CPU at the very end for a while, usually as
we'd finish whichever *.cocci rule was the most expensive.
This could be mitigated by combining "make -jN" with
SPATCH_BATCH_SIZE, see 960154b9c1 (coccicheck: optionally batch
spatch invocations, 2019-05-06).
There will be cases where getting rid of "SPATCH_BATCH_SIZE" makes
things worse, but a from-scratch "make coccicheck" with the default
of SPATCH_BATCH_SIZE=1 (and tweaking it doesn't make a difference)
is faster (~3m36s v.s. ~3m56s) with this approach, as we can feed
the CPU more work in a less staggered way.
* Getting rid of "SPATCH_BATCH_SIZE" particularly helps in cases
where the default of 1 yields parallelism under "make coccicheck",
but then running e.g.:
make -W contrib/coccinelle/swap.cocci coccicheck
I.e. before that would use only one CPU core, until the user
remembered to adjust "SPATCH_BATCH_SIZE" differently than the
setting that makes sense when doing a non-incremental run of "make
coccicheck".
* Before the "make coccicheck" rule would have to clean
"contrib/coccinelle/*.cocci.patch*", since we'd create "*+" and
"*.log" files there. Now those are created in
.build/contrib/coccinelle/, which is covered by the "cocciclean" rule
already.
Outstanding issues & future work:
* We could get rid of "--all-includes" in favor of manually
specifying a list of includes to give to "spatch(1)".
As noted upthread of [1] a naïve removal of "--all-includes" will
result in broken *.cocci patches, but if we know the exhaustive
list of includes via COMPUTE_HEADER_DEPENDENCIES we don't need to
re-scan for them, we could grab the headers to include from the
.depend.d/<file>.o.d and supply them with the "--include" option to
spatch(1).q
1. https://lore.kernel.org/git/87ft18tcog.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix an issue with a rule added in 9b45f49981 (object-store: prepare
has_{sha1, object}_file to handle any repo, 2018-11-13). We've been
spewing out this warning into our $@.log since that rule was added:
warning: rule starting on line 21: metavariable F not used in the - or context code
We should do a better job of scouring our coccinelle log files for
such issues, but for now let's fix this as a one-off.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
A bugfix to "git subtree" in its split and merge features.
* pb/subtree-split-and-merge-after-squashing-tag-fix:
subtree: fix split after annotated tag was squashed merged
subtree: fix squash merging after annotated tag was squashed merged
subtree: process 'git-subtree-split' trailer in separate function
subtree: use named variables instead of "$@" in cmd_pull
subtree: define a variable before its first use in 'find_latest_squash'
subtree: prefix die messages with 'fatal'
subtree: add 'die_incompatible_opt' function to reduce duplication
subtree: use 'git rev-parse --verify [--quiet]' for better error messages
test-lib-functions: mark 'test_commit' variables as 'local'
Update to build procedure with VS using CMake/CTest.
* js/cmake-updates:
cmake: increase time-out for a long-running test
cmake: avoid editing t/test-lib.sh
add -p: avoid ambiguous signed/unsigned comparison
cmake: copy the merge tools for testing
cmake: make it easier to diagnose regressions in CTest runs
The previous commit fixed a failure in 'git subtree merge --squash' when
the previous squash-merge merged an annotated tag of the subtree
repository which is missing locally.
The same failure happens in 'git subtree split', either directly or when
called by 'git subtree push', under the same circumstances: 'cmd_split'
invokes 'find_existing_splits', which loops through previous commits and
invokes 'git rev-parse' (via 'process_subtree_split_trailer') on the
value of any 'git subtree-split' trailer it finds. This fails if this
value is the hash of an annotated tag which is missing locally.
Add a new optional argument 'repository' to 'cmd_split' and
'find_existing_splits', and invoke 'cmd_split' with that argument from
'cmd_push'. This allows 'process_subtree_split_trailer' to try to fetch
the missing tag from the 'repository' if it's not available locally,
mirroring the new behaviour of 'git subtree pull' and 'git subtree
merge'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git subtree merge --squash $ref' is invoked, either directly or
through 'git subtree pull --squash $repo $ref', the code looks for the
latest squash merge of the subtree in order to create the new merge
commit as a child of the previous squash merge.
This search is done in function 'process_subtree_split_trailer', invoked
by 'find_latest_squash', which looks for the most recent commit with a
'git-subtree-split' trailer; that trailer's value is the object name in
the subtree repository of the ref that was last squash-merged. The
function verifies that this object is present locally with 'git
rev-parse', and aborts if it's not.
The hash referenced by the 'git-subtree-split' trailer is guaranteed to
correspond to a commit since it is the result of running 'git rev-parse
-q --verify "$1^{commit}"' on the first argument of 'cmd_merge' (this
corresponds to 'rev' in 'cmd_merge' which is passed through to
'new_squash_commit' and 'squash_msg').
But this is only the case since e4f8baa88a (subtree: parse revs in
individual cmd_ functions, 2021-04-27), which went into Git 2.32. Before
that commit, 'cmd_merge' verified the revision it was given using 'git
rev-parse --revs-only "$@"'. Such an invocation, when fed the name of an
annotated tag, would return the hash of the tag, not of the commit
referenced by the tag.
This leads to a failure in 'find_latest_squash' when squash-merging if
the most recent squash-merge merged an annotated tag of the subtree
repository, using a pre-2.32 version of 'git subtree', unless that
previous annotated tag is present locally (which is not usually the
case).
We can fix this by fetching the object directly by its hash in
'process_subtree_split_trailer' when 'git rev-parse' fails, but in order
to do so we need to know the name or URL of the subtree repository.
This is not possible in general for 'git subtree merge', but is easy
when it is invoked through 'git subtree pull' since in that case the
subtree repository is passed by the user at the command line.
Allow the 'git subtree pull' scenario to work out-of-the-box by adding
an optional 'repository' argument to functions 'cmd_merge',
'find_latest_squash' and 'process_subtree_split_trailer', and invoke
'cmd_merge' with that 'repository' argument in 'cmd_pull'.
If 'repository' is absent in 'process_subtree_split_trailer', instruct
the user to try fetching the missing object directly.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both functions 'find_latest_squash' (called by 'git subtree merge
--squash' and 'git subtree split --rejoin') and 'find_existing_splits'
(called by git 'subtree split') loop through commits that have a
'git-subtree-dir' trailer, and then process the 'git-subtree-mainline'
and 'git-subtree-split' trailers for those commits.
The processing done for the 'git-subtree-split' trailer is simple: we
check if the object exists with 'rev-parse' and set the variable
'sub' to the object name, or we die if the object does not exist.
In a future commit we will add more steps to the processing of this
trailer in order to make the code more robust.
To reduce code duplication, move the processing of the
'git-subtree-split' trailer to a dedicated function,
'process_subtree_split_trailer'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'cmd_pull' already checks that only two arguments are given,
'repository' and 'ref'. Define variables with these names instead of
using the positional parameter $2 and "$@".
This will allow a subsequent commit to pass 'repository' to 'cmd_merge'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function 'find_latest_squash' takes a single argument, 'dir', but a
debug statement uses this variable before it takes its value from $1.
This statement thus gets the value of 'dir' from the calling function,
which currently is the same as the 'dir' argument, so it works but it
is confusing.
Move the definition of 'dir' before its first use.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just as was done in 0008d12284 (submodule: prefix die messages with
'fatal', 2021-07-10) for 'git-submodule.sh', make the 'die' messages
outputed by 'git-subtree.sh' more in line with the rest of the code base
by prefixing them with "fatal: ", and do not capitalize their first
letter.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9a3e3ca2ba (subtree: be stricter about validating flags, 2021-04-27)
added validation code to check that options given to 'git subtree <cmd>'
made sense with the command being used.
Refactor these checks by adding a 'die_incompatible_opt' function to
reduce code duplication.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three occurences of 'git rev-parse <rev>' in 'git-subtree.sh'
where the command expects a revision and the script dies or exits if the
revision can't be found. In that case, the error message from 'git
rev-parse' is:
$ git rev-parse <bad rev>
<bad rev>
fatal: ambiguous argument '<bad rev>': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
This is a little confusing to the user, since this error message is
outputed by 'git subtree'.
At these points in the script, we know that we are looking for a single
revision, so be explicit by using '--verify', resulting in a little
better error message:
$ git rev-parse --verify <bad rev>
fatal: Needed a single revision
In the two occurences where we 'die' if 'git rev-parse' fails, 'git
subtree' outputs "could not rev-parse split hash $b from commit $sq", so
we actually do not need the supplementary error message from 'git
rev-parse'; add '--quiet' to silence it.
In the third occurence, we 'exit', so keep the error message from 'git
rev-parse'. Note that this messsage is still suboptimal since it can be
understood to mean that 'git rev-parse' did not receive a single
revision as argument, which is not the case here: the command did
receive a single revision, but the revision is not resolvable to an
available object.
The alternative would be to use '--' after the revision, as suggested by
the first error message, resulting in a clearer error message:
$ git rev-parse <bad rev> --
fatal: bad revision '<bad rev>'
Unfortunately we can't use that syntax because in the more common case
of the revision resolving to a known object, the command outputs the
object's hash, a newline, and the dashdash, which breaks the 'git
subtree' script.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested in
https://github.com/git-for-windows/git/issues/3966#issuecomment-1221264238,
t7112 can run for well over one hour, which seems to be the default
maximum run time at least when running CTest-based tests in Visual
Studio.
Let's increase the time-out as a stop gap to unblock developers wishing
to run Git's test suite in Visual Studio.
Note: The actual run time is highly dependent on the circumstances. For
example, in Git's CI runs, the Windows-based tests typically take a bit
over 5 minutes to run. CI runs have the added benefit that Windows
Defender (the common anti-malware scanner on Windows) is turned off,
something many developers are not at liberty to do on their work
stations. When Defender is turned on, even on this developer's high-end
Ryzen system, t7112 takes over 15 minutes to run.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7f5397a07c (cmake: support for testing git when building out of the
source tree, 2020-06-26), we implemented support for running Git's test
scripts even after building Git in a different directory than the source
directory.
The way we did this was to edit the file `t/test-lib.sh` to override
`GIT_BUILD_DIR` to point somewhere else than the parent of the `t/`
directory.
This is unideal because it always leaves a tracked file marked as
modified, and it is all too easy to commit that change by mistake.
Let's change the strategy by teaching `t/test-lib.sh` to detect the
presence of a file called `GIT-BUILD-DIR` in the source directory. If it
exists, the contents are interpreted as the location to the _actual_
build directory. We then write this file as part of the CTest
definition.
To support building Git via a regular `make` invocation after building
it using CMake, we ensure that the `GIT-BUILD-DIR` file is deleted (for
convenience, this is done as part of the Makefile rule that is already
run with every `make` invocation to ensure that `GIT-BUILD-OPTIONS` is
up to date).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when running the tests via CTest, t7609 and t7610 rely on more than
only a few mergetools to be copied to the build directory. Let's make it
so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test script fails in Git's test suite, the usual course of action
is to re-run it using options to increase the verbosity of the output,
e.g. `-v` and `-x`.
Like in Git's CI runs, when running the tests in Visual Studio via the
CTest route, it is cumbersome or at least requires a very unintuitive
approach to pass options to the test scripts: the CMakeLists.txt file
would have to be modified, passing the desired options to _all_ test
scripts, and then the CMake Cache would have to be reconfigured before
running the test in question individually. Unintuitive at best, and
opposite to the niceties IDE users expect.
So let's just pass those options by default: This will not clutter any
output window but the log that is written to a log file will have
information necessary to figure out test failures.
While at it, also imitate what the Windows jobs in Git's CI runs do to
accelerate running the test scripts: pass the `--no-bin-wrappers` and
`--no-chain-lint` options.
This makes the test runs noticeably faster because the `bin-wrappers/`
scripts as well as the `chain-lint` code make heavy use of POSIX shell
scripting, which is really, really slow on Windows due to the need to
emulate POSIX behavior via the MSYS2 runtime. In a test by Eric
Sunshine, it added two minutes (!) just to perform the chain-lint task.
The idea of adding a CMake config option (á la `GIT_TEST_OPTS`) was
considered during the development of this patch, but then dropped: such
a setting is global, across _all_ tests, where e.g. `--run=...` would
not make sense. Users wishing to override these new defaults are better
advised running the test script manually, in a Git Bash, with full
control over the command line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, use of fsmonitor on a repository on networked
filesystem is disabled. Add knobs to make it workable on macOS.
* ed/fsmonitor-on-networked-macos:
fsmonitor: fix leak of warning message
fsmonitor: add documentation for allowRemote and socketDir options
fsmonitor: check for compatability before communicating with fsmonitor
fsmonitor: deal with synthetic firmlinks on macOS
fsmonitor: avoid socket location check if using hook
fsmonitor: relocate socket file if .git directory is remote
fsmonitor: refactor filesystem checks to common interface
If the .git directory is on a remote filesystem, create the socket
file in 'fsmonitor.socketDir' if it is defined, else create it in $HOME.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a common interface for getting basic filesystem information
including filesystem type and whether the filesystem is remote.
Refactor existing code for getting basic filesystem info and detecting
remote file systems to the new interface.
Refactor filesystem checks to leverage new interface. For macOS,
error-out if the Unix Domain socket (UDS) file is on a remote
filesystem.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like in all the other credential helpers, the osxkeychain helper
ignores unknown credential lines.
Add a comment (a la the other helpers) to make it clear and explicit
that this is the desired behaviour.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Contrary to the documentation on credential helpers, as well as the help
text for git-credential-netrc itself, this helper will `die` when
presented with an unknown property/attribute/token.
Correct the behaviour here by skipping and ignoring any tokens that are
unknown. This means all helpers in the tree are consistent and ignore
any unknown credential properties/attributes.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is the expectation that credential helpers be liberal in what they
accept and conservative in what they return, to allow for future growth
and evolution of the protocol/interaction.
All of the other helpers (store, cache, osxkeychain, libsecret,
gnome-keyring) except `netrc` currently ignore any credential lines
that are not recognised, whereas the Windows helper (wincred) instead
dies.
Fix the discrepancy and ignore unknown lines in the wincred helper.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 't/test-results' directory and its contents are by-products of the
test process, so 'make clean' should remove them, but, alas, this has
been broken since fee65b194d (t/Makefile: don't remove test-results in
"clean-except-prove-cache", 2022-07-28).
The 'clean' target in 't/Makefile' was not directly responsible for
removing the 'test-results' directory, but relied on its dependency
'clean-except-prove-cache' to do that [1]. ee65b194d broke this,
because it only removed the 'rm -r test-results' command from the
'clean-except-prove-cache' target instead of moving it to the 'clean'
target, resulting in stray 't/test-results' directories.
Add that missing cleanup command to 't/Makefile', and to all
sub-Makefiles touched by that commit as well.
[1] 60f26f6348 (t/Makefile: retain cache t/.prove across prove runs,
2012-05-02)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hoist the remainder of "scalar" out of contrib/ to the main part of
the codebase.
* vd/scalar-to-main:
Documentation/technical: include Scalar technical doc
t/perf: add 'GIT_PERF_USE_SCALAR' run option
t/perf: add Scalar performance tests
scalar-clone: add test coverage
scalar: add to 'git help -a' command list
scalar: implement the `help` subcommand
git help: special-case `scalar`
scalar: include in standard Git build & installation
scalar: fix command documentation section header
Move 'scalar' out of 'contrib/' and into the root of the Git tree. The goal
of this change is to build 'scalar' as part of the standard Git build &
install processes.
This patch includes both the physical move of Scalar's files out of
'contrib/' ('scalar.c', 'scalar.txt', and 't9xxx-scalar.sh'), and the
changes to the build definitions in 'Makefile' and 'CMakelists.txt' to
accommodate the new program.
At a high level, Scalar is built so that:
- there is a 'scalar-objs' target (similar to those created in 029bac01a8
(Makefile: add {program,xdiff,test,git,fuzz}-objs & objects targets,
2021-02-23)) for debugging purposes.
- it appears in the root of the install directory (rather than the
gitexecdir).
- it is included in the 'bin-wrappers/' directory for use in tests.
- it receives a platform-specific executable suffix (e.g., '.exe'), if
applicable.
- 'scalar.txt' is installed as 'man1' documentation.
- the 'clean' target removes the 'scalar' executable.
Additionally, update the root level '.gitignore' file to ignore the Scalar
executable.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the last section header in 'contrib/scalar/scalar.txt' from "Scalar"
to "GIT". The linting rules of the 'documentation' CI build enforce the
existence of a "GIT" section in command documentation. Although 'scalar.txt'
is not yet checked, it will be in a future patch.
Here, changing the header name is more appropriate than making a
Scalar-specific exception to the linting rule. The existing "Scalar" section
contains only a link back to the main Git documentation, essentially the
same as the "GIT" section in builtin documentation. Changing the section
name further clarifies the Scalar-Git association and maintains consistency
with the rest of Git.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By automatically invoking chainlint.sed upon each test it runs,
`test_run_` in test-lib.sh ensures that broken &&-chains will be
detected early as tests are modified or new are tests created since it
is typical to run a test script manually (i.e. `./t1234-test-script.sh`)
during test development. Now that the implementation of chainlint.pl is
complete, modify test-lib.sh to invoke it automatically instead of
chainlint.sed each time a test script is run.
This change reduces the number of "linter" invocations from 26800+ (once
per test run) down to 1050+ (once per test script), however, a
subsequent change will drop the number of invocations to 1 per `make
test`, thus fully realizing the benefit of the new linter.
Note that the "magic exit code 117" &&-chain checker added by bb79af9d09
(t/test-lib: introduce --chain-lint option, 2015-03-20) which is built
into t/test-lib.sh is retained since it has near zero-cost and
(theoretically) may catch a broken &&-chain not caught by chainlint.pl.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash prompt (in contrib/) learned to optionally indicate when
the index is unmerged.
* jd/prompt-show-conflict:
git-prompt: show presence of unresolved conflicts at command prompt
"scalar" now enables built-in fsmonitor on enlisted repositories,
when able.
* vd/scalar-enables-fsmonitor:
scalar: update technical doc roadmap with FSMonitor support
scalar unregister: stop FSMonitor daemon
scalar: enable built-in FSMonitor on `register`
scalar: move config setting logic into its own function
scalar-delete: do not 'die()' in 'delete_enlistment()'
scalar-[un]register: clearly indicate source of error
scalar-unregister: handle error codes greater than 0
scalar: constrain enlistment search
The "diagnose" feature to create a zip archive for diagnostic
material has been lifted from "scalar" and made into a feature of
"git bugreport".
* vd/scalar-generalize-diagnose:
scalar: update technical doc roadmap
scalar-diagnose: use 'git diagnose --mode=all'
builtin/bugreport.c: create '--diagnose' option
builtin/diagnose.c: add '--mode' option
builtin/diagnose.c: create 'git diagnose' builtin
diagnose.c: add option to configure archive contents
scalar-diagnose: move functionality to common location
scalar-diagnose: move 'get_disk_info()' to 'compat/'
scalar-diagnose: add directory to archiver more gently
scalar-diagnose: avoid 32-bit overflow of size_t
scalar-diagnose: use "$GIT_UNZIP" in test
If GIT_PS1_SHOWCONFLICTSTATE is set to "yes", show the word "CONFLICT"
on the command prompt when there are unresolved conflicts.
Example prompt: (main|CONFLICT)
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Especially on Windows, we will need to stop that daemon, just in case
that the directory needs to be removed (the daemon would otherwise hold
a handle to that directory, preventing it from being deleted).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the built-in FSMonitor makes many common commands quite a bit
faster. So let's teach the `scalar register` command to enable the
built-in FSMonitor and kick-start the fsmonitor--daemon process (for
convenience).
For simplicity, we only support the built-in FSMonitor (and no external
file system monitor such as e.g. Watchman).
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create function 'set_scalar_config()' to contain the logic used in setting
Scalar-defined Git config settings, including how to handle reconfiguring &
overwriting existing values. This function allows future patches to set
config values in parts of 'scalar.c' other than 'set_recommended_config()'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than exiting with 'die()' when 'delete_enlistment()' encounters an
error, return an error code with the appropriate message. There's no need
for an abrupt exit with 'die()' in 'delete_enlistment()' because its only
caller ('cmd_delete()') properly cleans up allocated resources and returns
the 'delete_enlistment()' return value as its own exit code.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a step in 'register_dir()' or 'unregister_dir()' fails, indicate which
step failed with an error message, rather than silently assigning a nonzero
return code.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'scalar unregister' tries to disable maintenance and remove an
enlistment, ensure that the return value is nonzero if either operation
produces *any* nonzero return value, not just when they return a value less
than 0.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the search for repository and enlistment root in
'setup_enlistment_directory()' more constrained to simplify behavior and
adhere to 'GIT_CEILING_DIRECTORIES'.
Previously, 'setup_enlistment_directory()' would check whether the provided
path (or current working directory) '<dir>' or its subdirectory '<dir>/src'
was a repository root. If not, the process would repeat on the parent of
'<dir>' until the repository was found or it reached the root of the
filesystem. This meant that a user could specify a path *anywhere* inside an
enlistment (including paths not in the repository contained within the
enlistment) and it would be found.
The downside to this process is that the search would not account for
'GIT_CEILING_DIRECTORIES', so the upward search could result in modifying
repository contents past 'GIT_CEILING_DIRECTORIES'. Similarly, operations
like 'scalar delete' could end up unintentionally deleting the parent of a
repo if its root was named 'src'.
To make this 'setup_enlistment_directory()' both adhere to
'GIT_CEILING_DIRECTORIES' and avoid unwanted deletions, the search for an
enlistment directory is simplified to:
- if '<dir>/src' is a repository root, '<dir>' is the enlistment root
- if '<dir>' is either the repository root or contained within a repository,
the repository root is the enlistment root
Now, only 'setup_git_directory()' (called by 'setup_enlistment_directory()')
searches upwards from the 'scalar' specified path, enforcing
'GIT_CEILING_DIRECTORIES' in the process. Additionally, 'scalar delete
<dir>/src' will not delete '<dir>' (if users would like to delete it, they
can still specify the enlistment root with 'scalar delete <dir>'). This is
true of any 'scalar' operation; users can invoke 'scalar' on the enlistment
root, but paths must otherwise be inside the repository to be valid.
To help clarify the updated behavior, new tests are added to
't9099-scalar.sh'.
Finally, this change leaves 'strbuf_parent_directory()' with only a single,
WIN32-specific caller in 'delete_enlistment()'. Rather than wrap
'strbuf_parent_directory()' in '#ifdef WIN32' to avoid the "unused function"
compiler error, move the contents of 'strbuf_parent_directory()' into
'delete_enlistment()' and remove the function.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace implementation of 'scalar diagnose' with an internal invocation of
'git diagnose --mode=all'. This simplifies the implementation of
'cmd_diagnose' by making it a direct alias of 'git diagnose' and removes
some code in 'scalar.c' that is duplicated in 'builtin/diagnose.c'. The
simplicity of the alias also sets up a clean deprecation path for 'scalar
diagnose' (in favor of 'git diagnose'), if that is desired in the future.
This introduces one minor change to the output of 'scalar diagnose', which
is that the prefix of the created zip archive is changed from 'scalar_' to
'git-diagnostics-'.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 'create_diagnostics_archive()' to take an argument 'mode'. When
archiving diagnostics for a repository, 'mode' is used to selectively
include/exclude information based on its value. The initial options for
'mode' are:
* DIAGNOSE_NONE: do not collect any diagnostics or create an archive
(no-op).
* DIAGNOSE_STATS: collect basic repository metadata (Git version, repo path,
filesystem available space) as well as sizing and count statistics for the
repository's objects and packfiles.
* DIAGNOSE_ALL: collect basic repository metadata, sizing/count statistics,
and copies of the '.git', '.git/hooks', '.git/info', '.git/logs', and
'.git/objects/info' directories.
These modes are introduced to provide users the option to collect
diagnostics without the sensitive information included in copies of '.git'
dir contents. At the moment, only 'scalar diagnose' uses
'create_diagnostics_archive()' (with a hardcoded 'DIAGNOSE_ALL' mode to
match existing functionality), but more callers will be introduced in
subsequent patches.
Finally, refactor from a hardcoded set of 'add_directory_to_archiver()'
calls to iterative invocations gated by 'DIAGNOSE_ALL'. This allows for
easier future modification of the set of directories to archive and improves
error reporting when 'add_directory_to_archiver()' fails.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the core functionality of 'scalar diagnose' into a new 'diagnose.[c,h]'
library to prepare for new callers in the main Git tree generating
diagnostic archives. These callers will be introduced in subsequent patches.
While this patch appears large, it is mostly made up of moving code out of
'scalar.c' and into 'diagnose.c'. Specifically, the functions
- dir_file_stats_objects()
- dir_file_stats()
- count_files()
- loose_objs_stats()
- add_directory_to_archiver()
are all copied verbatim from 'scalar.c'. The 'create_diagnostics_archive()'
function is a mostly identical (partial) copy of 'cmd_diagnose()', with the
primary changes being that 'zip_path' is an input and "Enlistment root" is
corrected to "Repository root" in the archiver log.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move 'get_disk_info()' function into 'compat/'. Although Scalar-specific
code is generally not part of the main Git tree, 'get_disk_info()' will be
used in subsequent patches by additional callers beyond 'scalar diagnose'.
This patch prepares for that change, at which point this platform-specific
code should be part of 'compat/' as a matter of convention.
The function is copied *mostly* verbatim, with two exceptions:
* '#ifdef WIN32' is replaced with '#ifdef GIT_WINDOWS_NATIVE' to allow
'statvfs' to be used with Cygwin.
* the 'struct strbuf buf' and 'int res' (as well as their corresponding
cleanup & return) are moved outside of the '#ifdef' block.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a directory added to the 'scalar diagnose' archiver does not exist, warn
and return 0 from 'add_directory_to_archiver()' rather than failing with a
fatal error. This handles a failure edge case where the '.git/logs' has not
yet been created when running 'scalar diagnose', but extends to any
situation where a directory may be missing in the '.git' dir.
Now, when a directory is missing a warning is captured in the diagnostic
logs. This provides a user with more complete information than if 'scalar
diagnose' simply failed with an error.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid 32-bit size_t overflow when reporting the available disk space in
'get_disk_info' by casting the block size and available block count to
'off_t' before multiplying them. Without this change, 'st_mult' would
(correctly) report a size_t overflow on 32-bit systems at or exceeding 2^32
bytes of available space.
Note that 'off_t' is a 64-bit integer even on 32-bit systems due to the
inclusion of '#define _FILE_OFFSET_BITS 64' in 'git-compat-util.h' (see
b97e911643 (Support for large files on 32bit systems., 2007-02-17)).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the "$GIT_UNZIP" test variable rather than verbatim 'unzip' to unzip the
'scalar diagnose' archive. Using "$GIT_UNZIP" is needed to run the Scalar
tests on systems where 'unzip' is not in the system path.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend SANITIZE=leak checking and declare more tests "currently leak-free".
* ab/leak-check:
CI: use "GIT_TEST_SANITIZE_LEAK_LOG=true" in linux-leaks
upload-pack: fix a memory leak in create_pack_file()
leak tests: mark passing SANITIZE=leak tests as leak-free
leak tests: don't skip some tests under SANITIZE=leak
test-lib: have the "check" mode for SANITIZE=leak consider leak logs
test-lib: add a GIT_TEST_PASSING_SANITIZE_LEAK=check mode
test-lib: simplify by removing test_external
tests: move copy/pasted PERL + Test::More checks to a lib-perl.sh
t/Makefile: don't remove test-results in "clean-except-prove-cache"
test-lib: add a SANITIZE=leak logging mode
t/README: reword the "GIT_TEST_PASSING_SANITIZE_LEAK" description
test-lib: add a --invert-exit-code switch
test-lib: fix GIT_EXIT_OK logic errors, use BAIL_OUT
test-lib: don't set GIT_EXIT_OK before calling test_atexit_handler
test-lib: use $1, not $@ in test_known_broken_{ok,failure}_
"rerere-train" script (in contrib/) used to honor commit.gpgSign
while recreating the throw-away merges.
source: <PH7PR14MB5594A27B9295E95ACA4D6A69CE8F9@PH7PR14MB5594.namprd14.prod.outlook.com>
* cl/rerere-train-with-no-sign:
contrib/rerere-train: avoid useless gpg sign in training
Fix build procedure for Windows that uses CMake so that it can pick
up the shell interpreter from local installation location.
* ca/unignore-local-installation-on-windows:
cmake: support local installations of git
Workaround for a compiler warning against use of die() in
osx-keychain (in contrib/).
source: <pull.1293.git.1658251503775.gitgitgadget@gmail.com>
* ld/osx-keychain-usage-fix:
osx-keychain: fix compiler warning
"rerere-train" script (in contrib/) used to honor commit.gpgSign
while recreating the throw-away merges.
source: <PH7PR14MB5594A27B9295E95ACA4D6A69CE8F9@PH7PR14MB5594.namprd14.prod.outlook.com>
* cl/rerere-train-with-no-sign:
contrib/rerere-train: avoid useless gpg sign in training
Remove the "test_external" function added in [1]. This arguably makes
the output of t9700-perl-git.sh and friends worse. But as we'll argue
below the trade-off is worth it, since "chaining" to another TAP
emitter in test-lib.sh is more trouble than it's worth.
The new output of t9700-perl-git.sh is now:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
ok 2 - use t9700/test.pl to test Git.pm
# passed all 2 test(s)
1..2
Whereas before this change it would be:
$ ./t9700-perl-git.sh
ok 1 - set up test repository
# run 1: Perl API (perl /home/avar/g/git/t/t9700/test.pl)
ok 2 - use Git;
[... omitting tests 3..46 from t/t9700/test.pl ...]
ok 47 - unquote escape sequences
1..47
# test_external test Perl API was ok
# test_external_without_stderr test no stderr: Perl API was ok
At the time of its addition supporting "test_external" was easy, but
when test-lib.sh itself started to emit TAP in [2] we needed to make
everything surrounding the emission of the plan consider
"test_external". I added that support in [2] so that we could run:
prove ./t9700-perl-git.sh :: -v
But since then in [3] the door has been closed on combining
$HARNESS_ACTIVE and -v, we'll now just die:
$ prove ./t9700-perl-git.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
So the only use of this has been that *if* we had failure in one of
these tests we could e.g. in CI see which test failed based on the
test number. Now we'll need to look at the full verbose logs to get
that same information.
I think this trade-off is acceptable given the reduction in
complexity, and it brings these tests in line with other similar
tests, e.g. the reftable tests added in [4] will be condensed down to
just one test, which invokes the C helper:
$ ./t0032-reftable-unittest.sh
ok 1 - unittests
# passed all 1 test(s)
1..1
It would still be nice to have that ":: -v" form work again, it
never *really* worked, but even though we've had edge cases test
output screwing up the TAP it mostly worked between d998bd4ab6 and
[3], so we may have been overzealous in forbidding it outright.
I have local patches which I'm planning to submit sooner than later
that get us to that goal, and in a way that isn't buggy. In the
meantime getting rid of this special case makes hacking on this area
of test-lib.sh easier, as we'll do in subsequent commits.
The switch from "perl" to "$PERL_PATH" here is because "perl" is
defined as a shell function in the test suite, see a5bf824f3b (t:
prevent '-x' tracing from interfering with test helpers' stderr,
2018-02-25). On e.g. the OSX CI the "command perl"... will be part of
the emitted stderr.
1. fb32c41008 (t/test-lib.sh: add test_external and
test_external_without_stderr, 2008-06-19)
2. d998bd4ab6 (test-lib: Make the test_external_* functions
TAP-aware, 2010-06-24)
3. 614fe01521 (test-lib: bail out when "-v" used under
"prove", 2016-10-22)
4. ef8a6c6268 (reftable: utility functions, 2021-10-07)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the original "perl -MTest::More" prerequisite check was added in
[1] it's been copy/pasted in [2], [3] and [4]. As we'll be changing
these codepaths in a subsequent commit let's consolidate these.
While we're at it let's move these to a lazy prereq, and make them
conform to our usual coding style (e.g. "\nthen", not "; then").
1. e46f9c8161 (t9700: skip when Test::More is not available,
2008-06-29)
2. 5e9637c629 (i18n: add infrastructure for translating Git with
gettext, 2011-11-18)
3. 8d314d7afe (send-email: reduce dependencies impact on
parse_address_line, 2015-07-07)
4. f07eeed123 (git-credential-netrc: adapt to test framework for git,
2018-05-12)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "make test" is run with the default of "DEFAULT_TEST_TARGET=test"
we'll leave the "test-results" directory in-place, but don't do so for
the "prove" target.
The reason for this is that when 28d836c815 (test: allow running the
tests under "prove", 2010-10-14) allowed for running the tests under
"prove" there was no point in leaving the "test-results" in place.
The "prove" target provides its own summary, so we don't need to run
"aggregate-results", which is the reason we have "test-results" in the
first place. See 2d84e9fb6d (Modify test-lib.sh to output stats to
t/test-results/*, 2008-06-08).
But in a subsequent commit test-lib.sh will start emitting reports of
memory leaks in test-results/*, and it will be useful to analyze these
after the fact.
This wouldn't be a problem as failing tests will halt the removal of
the files (we'll never reach "clean-except-prove-cache" from the
"prove" target), but will be subsequently as we'll want to report a
successful run, but might still have e.g. logs of known memory leaks
in test-results/*.
So let's stop removing this, it's sufficient that "make clean" removes
it, and that "pre-clean" (which both "test" and "prove" depend on)
will remove it, i.e. we'll never have a stale "test-results" because
of this change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At least in systems where the user is local and not an administrator
git will install in a subdirectory of %APPDATALOCAL%, so it makes
sense to also look there for the shell needed by the cmake integration
with Visual Studio.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A coccinelle rule (in contrib/) to encourage use of COPY_ARRAY
macro has been improved.
* rs/cocci-array-copy:
cocci: avoid normalization rules for memcpy
Update git-credential-osxkeychain.c to remove 'format string is not a string
literal (potentially insecure)' compiler warning by treating the string as
an argument.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may have configured "git merge" to always require GPG
signing the resulting commits. We are not running "git merge" to
re-create merge commits, but merely to replay merge conflicts,
and we will immediately discard the resulting commits; there
is no point in signing them.
Override such configuration that forces useless signing from the
command line with the "--no-gpg-sign" option.
Signed-off-by: Celeste Liu <coelacanthus@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Coccinelle rules to detect the pattern of initializing and then
finalizing a structure without using it in between at all, which
happens after code restructuring and the compilers fail to
recognize as an unused variable.
* ab/cocci-unused:
cocci: generalize "unused" rule to cover more than "strbuf"
cocci: add and apply a rule to find "unused" strbufs
cocci: have "coccicheck{,-pending}" depend on "coccicheck-test"
cocci: add a "coccicheck-test" target and test *.cocci rules
Makefile & .gitignore: ignore & clean "git.res", not "*.res"
Makefile: remove mandatory "spatch" arguments from SPATCH_FLAGS
Adapt the content from 'contrib/scalar/README.md' into a design document in
'Documentation/technical/'. In addition to reformatting for asciidoc,
elaborate on the background, purpose, and design choices that went into
Scalar.
Most of this document will persist in the 'Documentation/technical/' after
Scalar has been moved out of 'contrib/' and into the root of Git. Until that
time, it will also contain a temporary "Roadmap" section detailing the
remaining series needed to finish the initial version of Scalar. The section
will be removed once Scalar is moved to the repo root, but in the meantime
serves as a guide for readers to keep up with progress on the feature.
Signed-off-by: Victoria Dye <vdye@github.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rephrase documentation to describe scalar as a "large repo management tool"
rather than an "opinionated management tool". The new description is
intended to more directly reflect the utility of scalar to better guide
users in preparation for scalar being built and installed as part of Git.
Signed-off-by: Victoria Dye <vdye@github.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further preparation to turn git-submodule.sh into a builtin.
* ab/submodule-cleanup:
git-sh-setup.sh: remove "say" function, change last users
git-submodule.sh: use "$quiet", not "$GIT_QUIET"
submodule--helper: eliminate internal "--update" option
submodule--helper: understand --checkout, --merge and --rebase synonyms
submodule--helper: report "submodule" as our name in some "-h" output
submodule--helper: rename "absorb-git-dirs" to "absorbgitdirs"
submodule update: remove "-v" option
submodule--helper: have --require-init imply --init
git-submodule.sh: remove unused top-level "--branch" argument
git-submodule.sh: make the "$cached" variable a boolean
git-submodule.sh: remove unused $prefix variable
git-submodule.sh: remove unused sanitize_submodule_env()
Some of the rules for using COPY_ARRAY instead of memcpy with sizeof are
intended to reduce the number of sizeof variants to deal with. They can
have unintended side effects if only they match, but not the one for the
COPY_ARRAY conversion at the end.
Avoid these side effects by instead using a self-contained rule for each
combination of array and pointer for source and destination which lists
all sizeof variants inline.
This lets "make contrib/coccinelle/array.cocci.patch" take 15% longer on
my machine, but gives peace of mind that no incomplete transformation
will be generated.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generalize the newly added "unused.cocci" rule to find more than just
"struct strbuf", let's have it find the same unused patterns for
"struct string_list", as well as other code that uses
similar-looking *_{release,clear,free}() and {release,clear,free}_*()
functions.
We're intentionally loose in accepting e.g. a "strbuf_init(&sb)"
followed by a "string_list_clear(&sb, 0)". It's assumed that the
compiler will catch any such invalid code, i.e. that our
constructors/destructors don't take a "void *".
See [1] for example of code that would be covered by the
"get_worktrees()" part of this rule. We'd still need work that the
series is based on (we were passing "worktrees" to a function), but
could now do the change in [1] automatically.
1. https://lore.kernel.org/git/Yq6eJFUPPTv%2Fzc0o@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a coccinelle rule to remove "struct strbuf" initialization
followed by calling "strbuf_release()" function, without any uses of
the strbuf in the same function.
See the tests in contrib/coccinelle/tests/unused.{c,res} for what it's
intended to find and replace.
The inclusion of "contrib/scalar/scalar.c" is because "spatch" was
manually run on it (we don't usually run spatch on contrib).
Per the "buggy code" comment we also match a strbuf_init() before the
xmalloc(), but we're not seeking to be so strict as to make checks
that the compiler will catch for us redundant. Saying we'll match
either "init" or "xmalloc" lines makes the rule simpler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "coccicheck-test" target to test our *.cocci rules, and as a
demonstration add tests for the rules added in 39ea59a257 (remove
unnecessary NULL check before free(3), 2016-10-08) and
1b83d1251e (coccinelle: add a rule to make "expression" code use
FREE_AND_NULL(), 2017-06-15).
I considered making use of the "spatch --test" option, and the choice
of a "tests" over a "t" directory is to make these tests compatible
with such a future change.
Unfortunately "spatch --test" doesn't return meaningful exit codes,
AFAICT you need to "grep" its output to see if the *.res is what you
expect. There's "--test-okfailed", but I didn't find a way to sensibly
integrate those (it relies on some in-between status files, but
doesn't help with the status codes).
Instead let's use a "--sp-file" pattern similar to the main
"coccicheck" rule, with the difference that we use and compare the
two *.res files with cmp(1).
The --very-quiet and --no-show-diff options ensure that we don't need
to pipe stdout and stderr somewhere. Unlike the "%.cocci.patch" rule
we're not using the diff.
The "cmp || git diff" is optimistically giving us better output on
failure, but even if we only have POSIX cmp and no system git
installed we'll still fail with the "cmp", just with an error message
that isn't as friendly. The "2>/dev/null" is in case we don't have a
"git" installed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "say" function, with various rewrites of the remaining
git-*.sh code to C and the preceding change to have git-submodule.sh
stop using the GIT_QUIET variable there were only four uses in
git-subtree.sh. Let's have it use an "arg_quiet" variable instead, and
move the "say" function over to it.
The only other use was a trivial message in git-instaweb.sh, since it
has never supported the --quiet option (or similar) that code added in
0b624b4cee (instaweb: restart server if already running, 2009-11-22)
can simply use "echo" instead.
The remaining in-tree hits from "say" are all for the sibling function
defined in t/test-lib.sh. It's safe to remove this function since it
has never been documented in Documentation/git-sh-setup.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The contrib/vscode/init.sh script initializes the .vscode directory with
some helpful metadata so VS Code handles Git code better.
One big issue that VS Code has is detecting the tab width based on file
type. ".txt" files were not covered by this script before, so add them
with the appropriate tab widths. This prevents inserting spaces instead
of tabs and keeps the tab width to eight instead of four or two.
While we are here, remove the "editor.wordWrap" settings. The editor's
word wrap is only cosmetic: it does not actually insert newlines when
your typing goes over the column limit. This can make it appear like you
have properly wrapped code, but it is incorrect. Further, existing code
that is over the column limit is wrapped even if your editor window is
wider than the limit. This can make reading such code more difficult.
Without these lines, VS Code renders the lines accurately, without
"ghost" newlines.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash command line prompt (in contrib/) update.
* jp/prompt-clear-before-upstream-mark:
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
Because of the wrapping of the branch name variable $b, the colour codes
in the variable don't get applied, but are instead printed directly in
the output. Move the wrapping of $b to before colour codes are inserted
to correct this. Revert move of branch name colour codes in tests, as
the branch name is now coloured after the wrapping instead of before.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8d4d86b0 (cache: remove null_sha1, 2019-08-18) removed the
is_null_sha1() function, rewrite rules to correct callers of the
function to use is_null_oid() instead has become irrelevant, as any
new callers of the function will get caught by the compiler much
more quickly without spending cycles on Coccinelle.
Remove these rules.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implementation of "scalar diagnose" subcommand.
* js/scalar-diagnose:
scalar: teach `diagnose` to gather loose objects information
scalar: teach `diagnose` to gather packfile info
scalar diagnose: include disk space information
scalar: implement `scalar diagnose`
scalar: validate the optional enlistment argument
archive --add-virtual-file: allow paths containing colons
archive: optionally add "virtual" files
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
CMake updates.
* yw/cmake-updates:
cmake: remove (_)UNICODE def on Windows in CMakeLists.txt
cmake: add pcre2 support
cmake: fix CMakeLists.txt on Linux
The short upstream state indicator inherits the colour of the last short
state indicator before it (if there is one), and the sparsity state
indicator inherits this colour as well. This behaviour was introduced by
0ec7c23cdc (git-prompt: make upstream state indicator location
consistent, 2022-02-27), while before this change the aforementioned
indicators were white/the default text colour. Some examples to
illustrate this behaviour (assuming all indicators are enabled and
colourization is on):
* If there is something in the stash, both the '$' and the short
upstream state indicator following it will be blue.
* If the local tree has new, untracked files and there is nothing in
the stash, both the '%' and the short upstream state indicator
will be red.
* If all local changes are added to the index and the stash is empty,
both the '+' and the short upstream state indicator following it will
be green.
* If the local tree is clean and there is nothing in the stash, the
short upstream state indicator will be white/${default text colour}.
This appears to be an unintended side-effect of the change, and makes
little sense semantically (e.g. why is it bad to be in sync with
upstream when you have uncommitted local changes?). The cause of the
change in colourization is that previously, the short upstream state
indicator appeared immediately after the rebase/revert/bisect/merge
state indicator (note the position of $p in $gitstring):
local f="$h$w$i$s$u"
local gitstring="$c$b${f:+$z$f}${sparse}$r$p"
Said indicator is prepended with the clear colour code, and the short
upstream state indicator is thus also uncoloured. Now, the short
upstream state indicator follows the sequence of colourized indicators,
without any clearing of colour (again note the position of $p, now in
$f):
local f="$h$w$i$s$u$p"
local gitstring="$c$b${f:+$z$f}${sparse}$r${upstream}"
If the user is in a sparse checkout, the sparsity state indicator
follows a similar pattern to the short upstream state indicator.
However, clearing colour of the colourized indicators changes how the
sparsity state indicator is colourized, as it currently inherits (and
before the change referenced also inherited) the colour of the last
short state indicator before it. Reading the commit message of the
change that introduced the sparsity state indicator, afda36dbf3
(git-prompt: include sparsity state as well, 2020-06-21), it appears
this colourization also was unintended, so clearing the colour for said
indicator further increases consistency.
Make the colourization of these state indicators consistent by making
all colourized indicators clear their own colour. Make colouring of $c
dependent on it not being empty, as it is no longer being used to colour
the branch name. Move clearing of $b's prefix to before colourization so
it gets cleared properly when colour codes are inserted into it. These
changes make changing the layout of the prompt less prone to unintended
colour changes in the future.
Change coloured Bash prompt tests to reflect the colourization changes:
* Move the colour codes to wrap the expected content of the expanded
$__git_ps1_branch_name in all tests.
* Insert a clear-colour code after the symbol for the first indicator
in "prompt - bash color pc mode - dirty status indicator - dirty
index and worktree", to reflect that all indicators should clear
their own colour.
Signed-off-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When operating at the scale that Scalar wants to support, certain data
shapes are more likely to cause undesirable performance issues, such as
large numbers of loose objects.
By including statistics about this, `scalar diagnose` now makes it
easier to identify such scenarios.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's helpful to see if there are other crud files in the pack
directory. Let's teach the `scalar diagnose` command to gather
file size information about pack files.
While at it, also enumerate the pack files in the alternate
object directories, if any are registered.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When analyzing problems with large worktrees/repositories, it is useful
to know how close to a "full disk" situation Scalar/Git operates. Let's
include this information.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the course of Scalar's development, it became obvious that there is
a need for a command that can gather all kinds of useful information
that can help identify the most typical problems with large
worktrees/repositories.
The `diagnose` command is the culmination of this hard-won knowledge: it
gathers the installed hooks, the config, a couple statistics describing
the data shape, among other pieces of information, and then wraps
everything up in a tidy, neat `.zip` archive.
Note: originally, Scalar was implemented in C# using the .NET API, where
we had the luxury of a comprehensive standard library that includes
basic functionality such as writing a `.zip` file. In the C version, we
lack such a commodity. Rather than introducing a dependency on, say,
libzip, we slightly abuse Git's `archive` machinery: we write out a
`.zip` of the empty try, augmented by a couple files that are added via
the `--add-file*` options. We are careful trying not to modify the
current repository in any way lest the very circumstances that required
`scalar diagnose` to be run are changed by the `diagnose` run itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `scalar` command needs a Scalar enlistment for many subcommands, and
looks in the current directory for such an enlistment (traversing the
parent directories until it finds one).
These is subcommands can also be called with an optional argument
specifying the enlistment. Here, too, we traverse parent directories as
needed, until we find an enlistment.
However, if the specified directory does not even exist, or is not a
directory, we should stop right there, with an error message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create another thread to watch over the daemon process and
automatically shut it down if necessary.
This commit creates the basic framework for a "health" thread
to monitor the daemon and/or the file system. Later commits
will add platform-specific code to do the actual work.
The "health" thread is intended to monitor conditions that
would be difficult to track inside the IPC thread pool and/or
the file system listener threads. For example, when there are
file system events outside of the watched worktree root or if
we want to have an idle-timeout auto-shutdown feature.
This commit creates the health thread itself, defines the thread-proc
and sets up the thread's event loop. It integrates this new thread
into the existing IPC and Listener thread models.
This commit defines the API to the platform-specific code where all of
the monitoring will actually happen.
The platform-specific code for MacOS is just stubs. Meaning that the
health thread will immediately exit on MacOS, but that is OK and
expected. Future work can define MacOS-specific monitoring.
The platform-specific code for Windows sets up enough of the
WaitForMultipleObjects() machinery to watch for system and/or custom
events. Currently, the set of wait handles only includes our custom
shutdown event (sent from our other theads). Later commits in this
series will extend the set of wait handles to monitor other
conditions.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend generic incompatibility checkout with platform-specific
mechanism. Stub in Win32 version.
In the existing fsmonitor-settings code we have a way to mark
types of repos as incompatible with fsmonitor (whether via the
hook and IPC APIs). For example, we do this for bare repos,
since there are no files to watch.
Extend this exclusion mechanism for platform-specific reasons.
This commit just creates the framework and adds a stub for Win32.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`UNICODE` and `_UNICODE` are not required when building git on Windows.
Actually, they should not be predefined at all.
There're 2 evidences that `(_)UNICODE` is supposed to be nonexist:
compat/win32/trace2_win32_process_info.c:83: It uses jw_array_string
which accepts pe32.szExeFile as const char*.
t/helper/test-drop-caches.c:16: Calling to GetCurrentDirectory with
Buffer as char*.
The autotools build system never defines `UNICODE` and `_UNICODE` and
builds on Windows well.
Signed-off-by: Yuyi Wang <Strawberry_Str@hotmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix one of the TODOs listed in the CMakeLists.txt by adding support
for building with pcre2.
As pcre2 doesn't provide cmake find module, we find it with pkgconf.
This patch also works with vcpkg on Windows, with pkgconf and pcre2
installed.
Pkgconf and pcre2 is detected automatically just like curl, expat
and iconv. The output of CMake indicates whether pcre2 is found.
Signed-off-by: Yuyi Wang <Strawberry_Str@hotmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CMakeLists.txt didn't follow the grammar of `set`, and it will fail when
setting `USE_VCPKG` off on non-Windows platforms.
When the platform is Linux, the Makefile adds `compat/linux/procinfo.o`
to `COMPAT_OBJS`, but the CMakeLists.txt didn't add
`compat/linux/procinfo.c` to `compat_SOURCES`. It would cause linkage
error.
Signed-off-by: Yuyi Wang <Strawberry_Str@hotmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
Add a coccinelle semantic patch necessary to reinforce the git coding style
guideline:
"Do not explicitly compute an integral value with constant 0 or '\ 0', or a
pointer value with constant NULL."
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
13092a91 (cocci: refactor common patterns to use xstrdup_or_null(),
2016-10-12) introduced a rule to rewrite this conditional call to
xstrdup(E) and an assignment to variable V:
- if (E)
- V = xstrdup(E);
into an unconditional call to xstrdup_or_null(E) and an assignment
to variable V:
+ V = xstrdup_or_null(E);
which is utterly bogus. The original code may already have an
acceptable value in V and the conditional assignment may be to
improve the value already in V with a copy of a better value E when
(and only when) E is not NULL.
The rewritten construct unconditionally discards the existing value
of V and replaces it with a copy of E, even when E is NULL, which
changes the meaning of the program.
By the way, if it were
-if (E && !V)
- V = xstrdup(E);
+V = xstrdup_or_null(E);
it would probably have been correct. But there is no existing code
that would have been improved by such a rule, so let's just remove
the bogus one without replacing with the more specific one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply coccinelle rules to remove "if (E)" before
"free_commit_list(E)", the function can accept NULL, and further
change cases where "E = NULL" followed to also be unconditionally.
The code changes in this commit were entirely made by the coccinelle
rule being added here, and applied with:
make contrib/coccinelle/free.cocci.patch
patch -p1 <contrib/coccinelle/free.cocci.patch
The only manual intervention here is that the the relevant code in
commit.c has been manually re-indented.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The externalConsole=true setting is broken for many users (launching the
debugger with such setting results in VS Code waiting forever without
actually starting the debugger). Also, this setting is a matter of user
preference, and is arguably better set in a "launch" section in the
user-wide settings.json than hardcoded in our script. Remove the line to
use VS Code's default, or the user's setting.
Add useful links in contrib/vscode/README.md to help the user to
configure VS Code and how to use the debugging feature.
Helped-by: Matthieu Moy <Matthieu.Moy@univ-lyon1.fr>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A micro fix to a topic earlier merged to 'master'
source: <patch-1.1-05949221e3f-20220319T002715Z-avarab@gmail.com>
* ab/make-optim-noop:
contrib/scalar: fix 'all' target in Makefile
Documentation/Makefile: fix "make info" regression in dad9cd7d51
Add extra ':' to second 'all' target definition to allow 'scalar' to build.
Without this fix, the 'all:' and 'all::' targets together cause a build
failure when 'scalar' build is enabled with 'INCLUDE_SCALAR':
Makefile:14: *** target file `all' has both : and :: entries. Stop.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
* tl/ls-tree-oid-only:
ls-tree: split up "fast path" callbacks
ls-tree: detect and error on --name-only --name-status
ls-tree: support --object-only option for "git-ls-tree"
ls-tree: introduce "--format" option
cocci: allow padding with `strbuf_addf()`
ls-tree: introduce struct "show_tree_data"
ls-tree: slightly refactor `show_tree()`
ls-tree: fix "--name-only" and "--long" combined use bug
ls-tree: simplify nesting if/else logic in "show_tree()"
ls-tree: rename "retval" to "recurse" in "show_tree()"
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
ls-tree: use "enum object_type", not {blob,tree,commit}_type
ls-tree: add missing braces to "else" arms
ls-tree: remove commented-out code
ls-tree tests: add tests for --name-status
These macros were last used in 5d3679ee02 (sha1-file: drop
has_sha1_file(), 2019-01-07), so let's remove coccinelle migration
rules added 9b45f49981 (object-store: prepare has_{sha1, object}_file
to handle any repo, 2018-11-13), along with the compatibility macros
themselves.
The "These functions.." in the diff context and the general comment
about compatibility macros still applies to
"NO_THE_REPOSITORY_COMPATIBILITY_MACROS" use just a few lines below
this, so let's keep the comment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweaks in the command line prompt (in contrib/) code around its
GIT_PS1_SHOWUPSTREAM feature.
* jd/prompt-upstream-mark:
git-prompt: put upstream comments together
git-prompt: make long upstream state indicator consistent
git-prompt: make upstream state indicator location consistent
git-prompt: rename `upstream` to `upstream_type`
"git stash" does not allow subcommands it internally runs as its
implementation detail, except for "git reset", to emit messages;
now "git reset" part has also been squelched.
* vd/stash-silence-reset:
reset: show --no-refresh in the short-help
reset: remove 'reset.refresh' config option
reset: remove 'reset.quiet' config option
reset: do not make '--quiet' disable index refresh
stash: make internal resets quiet and refresh index
reset: suppress '--no-refresh' advice if logging is silenced
reset: replace '--quiet' with '--no-refresh' in performance advice
reset: introduce --[no-]refresh option to --mixed
reset: revise index refresh advice
Replace core.fsyncObjectFiles with two new configuration variables,
core.fsync and core.fsyncMethod.
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
Stub in empty implementation of fsmonitor--daemon
backend for Darwin (aka MacOS).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stub in empty filesystem listener backend for fsmonitor--daemon on Windows.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6d158cba28 (bash completion: Support "divergence from upstream"
messages in __git_ps1, 2010-06-17) introduced support for indicating
divergence from upstream in the PS1 prompt. The comments at the top of
git-prompt.sh that were introduced with that commit are several
paragraphs long. Over the years, other comments have been inserted in
between the paragraphs relating to divergence from upstream.
This commit puts the comments relating to divergence from upstream back
together.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a pipe as a separator before long upstream state indicator. This is
consistent with long state indicators for sparse and in-progress
operations (e.g. merge).
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are long state indicators, they appear after short
state indicators if there are any, or after the branch name if there are
no short state indicators. Each long state indicator begins with a pipe
(`|`) as a separator.
Before/after examples with long upstream state indicator:
| Before | After |
| ------------------------------- | ------------------------------- |
| (main u=) | (main|u=) |
| (main u= origin/main) | (main|u= origin/main) |
| (main u+1) | (main|u+1) |
| (main u+1 origin/main) | (main|u+1 origin/main) |
| (main % u=) | (main %|u=) |
| (main % u= origin/main) | (main %|u= origin/main) |
| (main % u+1) | (main %|u+1) |
| (main % u+1 origin/main) | (main %|u+1 origin/main) |
| (main|SPARSE u=) | (main|SPARSE|u=) |
| (main|SPARSE u= origin/main) | (main|SPARSE|u= origin/main) |
| (main|SPARSE u+1) | (main|SPARSE|u+1) |
| (main|SPARSE u+1 origin/main) | (main|SPARSE|u+1 origin/main) |
| (main %|SPARSE u=) | (main %|SPARSE|u=) |
| (main %|SPARSE u= origin/main) | (main %|SPARSE|u= origin/main) |
| (main %|SPARSE u+1) | (main %|SPARSE|u+1) |
| (main %|SPARSE u+1 origin/main) | (main %|SPARSE|u+1 origin/main) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make upstream state indicator location more consistent with similar
state indicators (e.g. sparse). Group the short upstream state indicator
(`=`, `<`, `>`, or `<>`) with other short state indicators immediately
after the branch name. Previously short and long upstream state
indicators appeared after all other state indicators.
Use a separator (`SP` or `GIT_PS1_STATESEPARATOR`) between branch name
and short upstream state indicator. Previously the short upstream state
indicator would sometimes appear directly adjacent to the branch name
instead of being separated.
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are short state indicators, they appear together
after the branch name and separated from it by `SP` or
`GIT_PS1_STATESEPARATOR`.
Before/after examples with short upstream state indicator:
| Before | After |
| ---------------- | ---------------- |
| (main=) | (main =) |
| (main|SPARSE=) | (main =|SPARSE) |
| (main %|SPARSE=) | (main %=|SPARSE) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `__git_ps1_show_upstream` rename the variable `upstream` to
`upstream_type`. This allows `__git_ps1_show_upstream` to reference a
variable named `upstream` that is declared `local` in `__git_ps1`, which
calls `__git_ps1_show_upstream`.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A convenient way to pad strings is to use something like
`strbuf_addf(&buf, "%20s", "Hello, world!")`.
However, the Coccinelle rule that forbids a format `"%s"` with a
constant string argument cast too wide a net, and also forbade such
padding.
The original rule was introduced by commit:
28c23cd4c3 (strbuf.cocci: suggest strbuf_addbuf() to add one strbuf to an other, 2019-01-25)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no --args are present after 'git restore', it assumes that you
want to tab-complete one of the files with unstaged uncommitted
changes.
If a file has been staged, we don't want to list it, as restoring those
requires a slightly more complex `git restore --staged`, so we only list
those files that are --modified. While --committable also looks like
a good candidate, that includes changes that have been staged.
Signed-off-by: David Cantrell <david@cantrell.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile refactoring with a bit of suffixes rule stripping to
optimize the runtime overhead.
* ab/make-optim-noop:
Makefiles: add and use wildcard "mkdir -p" template
Makefile: add "$(QUIET)" boilerplate to shared.mak
Makefile: move $(comma), $(empty) and $(space) to shared.mak
Makefile: move ".SUFFIXES" rule to shared.mak
Makefile: define $(LIB_H) in terms of $(FIND_SOURCE_FILES)
Makefile: disable GNU make built-in wildcard rules
Makefiles: add "shared.mak", move ".DELETE_ON_ERROR" to it
scalar Makefile: use "The default target of..." pattern
This commit introduces the `core.fsyncMethod` configuration
knob, which can currently be set to `fsync` or `writeout-only`.
The new writeout-only mode attempts to tell the operating system to
flush its in-memory page cache to the storage hardware without issuing a
CACHE_FLUSH command to the storage controller.
Writeout-only fsync is significantly faster than a vanilla fsync on
common hardware, since data is written to a disk-side cache rather than
all the way to a durable medium. Later changes in this patch series will
take advantage of this primitive to implement batching of hardware
flushes.
When git_fsync is called with FSYNC_WRITEOUT_ONLY, it may fail and the
caller is expected to do an ordinary fsync as needed.
On Apple platforms, the fsync system call does not issue a CACHE_FLUSH
directive to the storage controller. This change updates fsync to do
fcntl(F_FULLFSYNC) to make fsync actually durable. We maintain parity
with existing behavior on Apple platforms by setting the default value
of the new core.fsyncMethod option.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $(QUIET) variables we define are largely duplicated between our
various Makefiles, let's define them in the new "shared.mak" instead.
Since we're not using the environment to pass these around we don't
need to export the "QUIET_GEN" and "QUIET_BUILT_IN" variables
anymore. The "QUIET_GEN" variable is used in "git-gui/Makefile" and
"gitweb/Makefile", but they've got their own definition for those. The
"QUIET_BUILT_IN" variable is only used in the top-level "Makefile". We
still need to export the "V" variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have various behavior that's shared across our Makefiles, or that
really should be (e.g. via defined templates). Let's create a
top-level "shared.mak" to house those sorts of things, and start by
adding the ".DELETE_ON_ERROR" flag to it.
See my own 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) and db10fc6c09 (doc: simplify Makefile using
.DELETE_ON_ERROR, 2021-05-21) for the addition and use of the
".DELETE_ON_ERROR" flag.
I.e. this changes the behavior of existing rules in the altered
Makefiles (except "Makefile" & "Documentation/Makefile"). I'm
confident that this is safe having read the relevant rules in those
Makfiles, and as the GNU make manual notes that it isn't the default
behavior is out of an abundance of backwards compatibility
caution. From edition 0.75 of its manual, covering GNU make 4.3:
[Enabling '.DELETE_ON_ERROR' is] almost always what you want
'make' to do, but it is not historical practice; so for
compatibility, you must explicitly request it.
This doesn't introduce a bug by e.g. having this
".DELETE_ON_ERROR" flag only apply to this new shared.mak, Makefiles
have no such scoping semantics.
It does increase the danger that any Makefile without an explicit "The
default target of this Makefile is..." snippet to define the default
target as "all" could have its default rule changed if our new
shared.mak ever defines a "real" rule. In subsequent commits we'll be
careful not to do that, and such breakage would be obvious e.g. in the
case of "make -C t".
We might want to make that less fragile still (e.g. by using
".DEFAULT_GOAL" as noted in the preceding commit), but for now let's
simply include "shared.mak" without adding that boilerplate to all the
Makefiles that don't have it already. Most of those are already
exposed to that potential caveat e.g. due to including "config.mak*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "contrib/scalar/Makefile" be stylistically consistent with
the top-level "Makefile" in first declaring "all" to be the default
rule, followed by including other Makefile snippets.
This adjusts code added in 0a43fb2202 (scalar: create a rudimentary
executable, 2021-12-03), it further ensures that when we add another
"include" file in a subsequent commit that the included file won't be
the one to define our default target.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script uses "git show -s" to display the title of the merge
commit being studied, without explicitly disabling the pager, which
is not a safe thing to do in a script.
For example, when the pager is set to "less" with "-SF" options (-S
tells the pager not to fold lines but allow horizontal scrolling to
show the overly long lines, -F tells the pager not to wait if the
output in its entirety is shown on a single page), and the title of
the merge commit is longer than the width of the terminal, the pager
will wait until the end-user tells it to quit after showing the
single line.
Explicitly disable the pager with this "git show" invocation to fix
this.
The command uses the "--pretty=format:..." format, which adds LF in
between each pair of commits it outputs, which means that the label
for the merge being learned from will be followed by the next
message on the same line. "--pretty=tformat:..." is what we should
instead, which adds LF after each commit, or a more modern way to
spell it, i.e. "--format=...". This existing breakage becomes
easier to see, now we no longer use the pager.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
When "git subtree" wants to create a merge, it used "git merge" and
let it be affected by end-user's "merge.ff" configuration, which
has been corrected.
* tk/subtree-merge-not-ff-only:
subtree: force merge commit
The command line completion (in contrib/) learns to complete
arguments to give to "git sparse-checkout" command.
* ld/sparse-index-bash-completion:
completion: handle unusual characters for sparse-checkout
completion: improve sparse-checkout cone mode directory completion
completion: address sparse-checkout issues
Pick a better random number generator and use it when we prepare
temporary filenames.
* bc/csprng-mktemps:
wrapper: use a CSPRNG to generate random file names
wrapper: add a helper to generate numbers from a CSPRNG
Update the __gitcomp_directories method to de-quote and handle unusual
characters in directory names. Although this initially involved an attempt
to re-use the logic in __git_index_files, this method removed
subdirectories (e.g. folder1/0/ became folder1/), so instead new custom
logic was placed directly in the __gitcomp_directories method.
Note there are two tests for this new functionality - one for spaces and
accents and one for backslashes and tabs. The backslashes and tabs test
uses FUNNYNAMES to avoid running on Windows. This is because:
1. Backslashes are explicitly not allowed in Windows file paths.
2. Although tabs appear to be allowed when creating a file in a Windows
bash shell, they actually are not renderable (and appear as empty boxes
in the shell).
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_directories method to complete directory names in cone
mode sparse-checkouts. This method addresses the caveat of poor
performance in monorepos from the previous commit (by completing only one
level of directories).
The unusual character caveat from the previous commit will be fixed by the
final commit in this series.
Co-authored-by: Elijah Newren <newren@gmail.com>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct multiple issues with tab completion of the git sparse-checkout
command. These issues were:
1. git sparse-checkout <TAB> previously resulted in an incomplete list of
subcommands (it was missing reapply and add).
2. Subcommand options were not tab-completable.
3. git sparse-checkout set <TAB> and git sparse-checkout add <TAB> showed
both file names and directory names. While this may be a less surprising
behavior for non-cone mode, cone mode sparse checkouts should complete
only directory names.
Note that while the new strategy of just using git ls-tree to complete on
directory names is simple and a step in the right direction, it does have
some caveats. These are:
1. Likelihood of poor performance in large monorepos (as a result of
recursively completing directory names).
2. Inability to handle paths containing unusual characters.
These caveats will be fixed by subsequent commits in this series.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a GIT_COMPLETION_SHOW_ALL_COMMANDS=1 configuration setting to go
with the existing GIT_COMPLETION_SHOW_ALL=1 added in
c099f579b9 (completion: add GIT_COMPLETION_SHOW_ALL env var,
2020-08-19).
This will include plumbing commands such as "cat-file" in "git <TAB>"
and "git c<TAB>" completion. Without/with this I have 134 and 243
completion with git <TAB>, respectively.
It was already possible to do this by tweaking
GIT_TESTING_PORCELAIN_COMMAND_LIST= from the outside, that testing
variable was added in 84a9713106 (completion: let git provide the
completable command list, 2018-05-20). Doing this before loading
git-completion.bash worked:
export GIT_TESTING_PORCELAIN_COMMAND_LIST="$(git --list-cmds=builtins,main,list-mainporcelain,others,nohelpers,alias,list-complete,config)"
But such testing variables are not meant to be used from the outside,
and we make no guarantees that those internal won't change. So let's
expose this as a dedicated configuration knob.
It would be better to teach --list-cmds=* a new category which would
include all of these groups, but that's a larger change that we can
leave for some other time.
1. https://lore.kernel.org/git/CAGP6POJ9gwp+t-eP3TPkivBLLbNb2+qj=61Mehcj=1BgrVOSLA@mail.gmail.com/
Reported-by: Hongyi Zhao <hongyi.zhao@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `merge.ff` is set to `only` in .gitconfig, `git subtree pull` will
fail with error `fatal: Not possible to fast-forward, aborting.`, but
the command does want to make merges in these places. Add `--no-ff`
argument to `git merge` to enforce this behaviour.
Signed-off-by: Thomas Koutcher <thomas.koutcher@online.fr>
Reviewed-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git` executable has these two very useful options:
-C <directory>:
switch to the specified directory before performing any actions
-c <key>=<value>:
temporarily configure this setting for the duration of the
specified scalar subcommand
With this commit, we teach the `scalar` executable the same trick.
Note: It might look like a good idea to try to reuse the
`handle_options()` function in `git.c` instead of replicating only the
`-c`/`-C` part. However, that function is not only not in `libgit.a`, it
is also intricately entangled with the rest of the code in `git.c` that
is necessary e.g. to handle `--paginate`. Besides, no other option
handled by that `handle_options()` function is relevant to Scalar,
therefore the cost of refactoring vastly would outweigh the benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many situations in which having access to a cryptographically
secure pseudorandom number generator (CSPRNG) is helpful. In the
future, we'll encounter one of these when dealing with temporary files.
To make this possible, let's add a function which reads from a system
CSPRNG and returns some bytes.
We know that all systems will have such an interface. A CSPRNG is
required for a secure TLS or SSH implementation and a Git implementation
which provided neither would be of little practical use. In addition,
POSIX is set to standardize getentropy(2) in the next version, so in the
(potentially distant) future we can rely on that.
For systems which lack one of the other interfaces, we provide the
ability to use OpenSSL's CSPRNG. OpenSSL is highly portable and
functions on practically every known OS, and we know it will have access
to some source of cryptographically secure randomness. We also provide
support for the arc4random in libbsd for folks who would prefer to use
that.
Because this is a security sensitive interface, we take some
precautions. We either succeed by filling the buffer completely as we
requested, or we fail. We don't return partial data because the caller
will almost never find that to be a useful behavior.
Specify a makefile knob which users can use to specify one or more
suitable CSPRNGs, and turn the multiple string options into a set of
defines, since we cannot match on strings in the preprocessor. We allow
multiple options to make the job of handling this in autoconf easier.
The order of options is important here. On systems with arc4random,
which is most of the BSDs, we use that, since, except on MirBSD and
macOS, it uses ChaCha20, which is extremely fast, and sits entirely in
userspace, avoiding a system call. We then prefer getrandom over
getentropy, because the former has been available longer on Linux, and
then OpenSSL. Finally, if none of those are available, we use
/dev/urandom, because most Unix-like operating systems provide that API.
We prefer options that don't involve device files when possible because
those work in some restricted environments where device files may not be
available.
Set the configuration variables appropriately for Linux and the BSDs,
including macOS, as well as Windows and NonStop. We specifically only
consider versions which receive publicly available security support
here. For the same reason, we don't specify getrandom(2) on Linux,
because CentOS 7 doesn't support it in glibc (although its kernel does)
and we don't want to resort to making syscalls.
Finally, add a test helper to allow this to be tested by hand and in
tests. We don't add any tests, since invoking the CSPRNG is not likely
to produce interesting, reproducible results.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
315a84f9aa (subtree: use commits before rejoins for splits, 2018-09-28)
changed the signature of check_parents from 'check_parents [REV...]'
to 'check_parents PARENTS_EXPR INDENT'. In other words the variable list
of parent revisions became a list embedded in a string. However it
neglected to unpack the list again before sending it to cache_miss,
leading to incorrect calls whenever more than one parent was present.
This is the case whenever a merge commit is processed, with the end
result being a loss of performance from unecessary rechecks.
The indent parameter was subsequently removed in e9525a8a02 (subtree:
have $indent actually affect indentation, 2021-04-27), but the argument
handling bug remained.
For consistency, take multiple arguments in check_parents,
and pass all of them to cache_miss separately.
Signed-off-by: James Limbouris <james@digitalmatter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
