--remerge-diff only makes sense for 'git log' and 'git show', so add it
to __git_log_show_options which is referenced in the completion for
these two commands.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flags --[no-]diff-merges only make sense for 'git log' and 'git
show', so add a new variable __git_log_show_options for options only
relevant to these two commands, and add them there. Also add
__git_diff_merges_opts and list the accepted values for --diff-merges,
and use it in _git_log and _git_show.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options --pickaxe-all and --pickaxe-regex are listed in
__git_diff_difftool_options and repeated in _git_log. Move them to
__git_diff_common_options instead, which makes them available
automatically in the completion of other commands referencing this
variable.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --ws-error-highlight= to the list in __git_diff_common_options, and
add the accepted values in a new list __git_ws_error_highlight_opts.
Use __git_ws_error_highlight_opts in _git_diff, _git_log and _git_show
to offer the accepted values.
As noted in fd0bc17557 (completion: add diff --color-moved[-ws],
2020-02-21), there is no easy way to offer completion for several
comma-separated values, so this is limited to completing a single
value.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --no-relative to __git_diff_common_options in the completion script,
and move --relative from __git_diff_difftool_options to
__git_diff_common_options since it applies to more than just diff and
difftool.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options --ita-invisible-in-index and --ita-visible-in-index are
listed in diff-options.txt and so are included in the documentation of
commands which include this file (diff, diff-*, log, show, format-patch)
but they only make sense for diffs relating to the index. As such, add
them to '__git_diff_difftool_options' instead of
'__git_diff_common_options' since it makes more sense to add them there.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add descriptive comments for '__git_diff_common_options' and
'__git_diff_difftool_options', so that it is clearer when looking at
these variables to know in which command's completion they are used.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pseudoref AUTO_MERGE is documented since the previous commit. To
make it easier to use, let __git_refs in the Bash completion code
complete it.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pseudorefs REVERT_HEAD and BISECT_HEAD are not suggested
by the __git_refs function. Add them there.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When GIT_COMPLETION_IGNORE_CASE is set, also allow lowercase completion
text like "head" to match uppercase HEAD and other pseudorefs.
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_COMPLETION_IGNORE_CASE is set, --ignore-case will be added to
git for-each-ref calls so that refs can be matched case insensitively,
even when running on case sensitive filesystems.
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no --args are present after 'git restore', it assumes that you
want to tab-complete one of the files with unstaged uncommitted
changes.
If a file has been staged, we don't want to list it, as restoring those
requires a slightly more complex `git restore --staged`, so we only list
those files that are --modified. While --committable also looks like
a good candidate, that includes changes that have been staged.
Signed-off-by: David Cantrell <david@cantrell.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
Update the __gitcomp_directories method to de-quote and handle unusual
characters in directory names. Although this initially involved an attempt
to re-use the logic in __git_index_files, this method removed
subdirectories (e.g. folder1/0/ became folder1/), so instead new custom
logic was placed directly in the __gitcomp_directories method.
Note there are two tests for this new functionality - one for spaces and
accents and one for backslashes and tabs. The backslashes and tabs test
uses FUNNYNAMES to avoid running on Windows. This is because:
1. Backslashes are explicitly not allowed in Windows file paths.
2. Although tabs appear to be allowed when creating a file in a Windows
bash shell, they actually are not renderable (and appear as empty boxes
in the shell).
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_directories method to complete directory names in cone
mode sparse-checkouts. This method addresses the caveat of poor
performance in monorepos from the previous commit (by completing only one
level of directories).
The unusual character caveat from the previous commit will be fixed by the
final commit in this series.
Co-authored-by: Elijah Newren <newren@gmail.com>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct multiple issues with tab completion of the git sparse-checkout
command. These issues were:
1. git sparse-checkout <TAB> previously resulted in an incomplete list of
subcommands (it was missing reapply and add).
2. Subcommand options were not tab-completable.
3. git sparse-checkout set <TAB> and git sparse-checkout add <TAB> showed
both file names and directory names. While this may be a less surprising
behavior for non-cone mode, cone mode sparse checkouts should complete
only directory names.
Note that while the new strategy of just using git ls-tree to complete on
directory names is simple and a step in the right direction, it does have
some caveats. These are:
1. Likelihood of poor performance in large monorepos (as a result of
recursively completing directory names).
2. Inability to handle paths containing unusual characters.
These caveats will be fixed by subsequent commits in this series.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a GIT_COMPLETION_SHOW_ALL_COMMANDS=1 configuration setting to go
with the existing GIT_COMPLETION_SHOW_ALL=1 added in
c099f579b9 (completion: add GIT_COMPLETION_SHOW_ALL env var,
2020-08-19).
This will include plumbing commands such as "cat-file" in "git <TAB>"
and "git c<TAB>" completion. Without/with this I have 134 and 243
completion with git <TAB>, respectively.
It was already possible to do this by tweaking
GIT_TESTING_PORCELAIN_COMMAND_LIST= from the outside, that testing
variable was added in 84a9713106 (completion: let git provide the
completable command list, 2018-05-20). Doing this before loading
git-completion.bash worked:
export GIT_TESTING_PORCELAIN_COMMAND_LIST="$(git --list-cmds=builtins,main,list-mainporcelain,others,nohelpers,alias,list-complete,config)"
But such testing variables are not meant to be used from the outside,
and we make no guarantees that those internal won't change. So let's
expose this as a dedicated configuration knob.
It would be better to teach --list-cmds=* a new category which would
include all of these groups, but that's a larger change that we can
leave for some other time.
1. https://lore.kernel.org/git/CAGP6POJ9gwp+t-eP3TPkivBLLbNb2+qj=61Mehcj=1BgrVOSLA@mail.gmail.com/
Reported-by: Hongyi Zhao <hongyi.zhao@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Zealous diff3" style of merge conflict presentation has been added.
* en/zdiff3:
update documentation for new zdiff3 conflictStyle
xdiff: implement a zealous diff3, or "zdiff3"
The completion script (in contrib/) learns that the "--date"
option of commands from the "git log" family takes "human" and
"auto" as valid values.
* yn/complete-date-format-options:
completion: add human and auto: date format
"zdiff3" is identical to ordinary diff3 except that it allows compaction
of common lines on the two sides of history at the beginning or end of
the conflict hunk. For example, the following diff3 conflict:
1
2
3
4
<<<<<<
A
B
C
D
E
||||||
5
6
======
A
X
C
Y
E
>>>>>>
7
8
9
has common lines 'A', 'C', and 'E' on the two sides. With zdiff3, one
would instead get the following conflict:
1
2
3
4
A
<<<<<<
B
C
D
||||||
5
6
======
X
C
Y
>>>>>>
E
7
8
9
Note that the common lines, 'A', and 'E' were moved outside the
conflict. Unlike with the two-way conflicts from the 'merge'
conflictStyle, the zdiff3 conflict is NOT split into multiple conflict
regions to allow the common 'C' lines to be shown outside a conflict,
because zdiff3 shows the base version too and the base version cannot be
reasonably split.
Note also that the removing of lines common to the two sides might make
the remaining text inside the conflict region match the base text inside
the conflict region (for example, if the diff3 conflict had '5 6 E' on
the right side of the conflict, then the common line 'E' would be moved
outside and both the base and right side's remaining conflict text would
be the lines '5' and '6'). This has the potential to surprise users and
make them think there should not have been a conflict, but there
definitely was a conflict and it should remain.
Based-on-patch-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Co-authored-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line complation for "git send-email" options have been
tweaked to make it easier to keep it in sync with the command itself.
* tp/send-email-completion:
send-email docs: add format-patch options
send-email: programmatically generate bash completions
human was introduced in acdd37769d
auto:* was introduced in 2fd7c22992
Those formats were missing when other values were added to completion
at 5a59a2301f
Signed-off-by: Yoichi Nakayama <yoichi.nakayama@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the basic `[`/`test` command, the string equality operator is a
single `=`. The `==` operator is only available in `[[`, which is a
bash-ism also supported by zsh.
This mix-up was causing the following completion error in zsh:
> __git_ls_files_helper:7: = not found
(That message refers to the extraneous symbol in `==` ← `=`).
This updates that comparison to use a single `=` inside the
basic `[ … ]` test conditional.
Although this fix is inconsistent with the other comparisons in this
file, which use `[[ … == … ]]`, and the two expressions are functionally
identical in this context, that approach was rejected due to a
preference for `[`.
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email --git-completion-helper" only prints "format-patch"
flags. Make it print "send-email" flags as well, extracting them
programmatically from its three existing "GetOptions".
Introduce a "uniq" subroutine, otherwise --cc-cover, --to-cover and
other flags would show up twice. In addition, deduplicate flags common
to both "send-email" and "format-patch", like --from.
Remove extraneous flags: --h and --git-completion-helper.
Add trailing "=" to options that expect an argument, inline with
the format-patch implementation.
Add a completion test for "send-email --validate", a send-email flag.
Signed-off-by: Thiago Perrotta <tbperrotta@gmail.com>
Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
The "help" builtin has been able to emit configuration variables since
e17ca92637 (completion: drop the hard coded list of config vars,
2018-05-26), but it hasn't produced exactly the format the completion
script wanted. Let's do that.
We got partway there in 2675ea1cc0 (completion: use 'sort -u' to
deduplicate config variable names, 2019-08-13) and
d9438873c4 (completion: deduplicate configuration sections,
2019-08-13), but after both we still needed some sorting,
de-duplicating and awk post-processing of the list.
We can instead simply do the relevant parsing ourselves (we were doing
most of it already), and call string_list_remove_duplicates() after
already sorting the list, so the caller doesn't need to invoke "sort
-u". The "--config-for-completion" output is the same as before after
being passed through "sort -u".
Then add a new "--config-sections-for-completion" option. Under that
output we'll emit config sections like "alias" (instead of "alias." in
the --config-for-completion output).
We need to be careful to leave the "--config-for-completion" option
compatible with users git, but are still running a shell with an older
git-completion.bash. If we e.g. changed the option name they'd see
messages about git-completion.bash being unable to find the
"--config-for-completion" option.
Such backwards compatibility isn't something we should bend over
backwards for, it's only helping users who:
* Upgrade git
* Are in an old shell
* The git-completion.bash in that shell hasn't cached the old
"--config-for-completion" output already.
But since it's easy in this case to retain compatibility, let's do it,
the older versions of git-completion.bash won't care that the input
they get doesn't change after a "sort -u".
While we're at it let's make "--config-for-completion" die if there's
anything left over in "argc", and do the same in the new
"--config-sections-for-completion" option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for `git-rebase--preserve-merges.sh` entering its after
life, we remove this (deprecated) option that would still rely on it.
To help users transition who still did not receive the memo about the
deprecation, we offer a helpful error message instead of throwing our
hands in the air and saying that we don't know that option, never heard
of it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
__gitcomp automatically adds a suffix, but __gitcomp_nl and others
don't, we need to specify a space by default.
Can be tested with:
git config branch.autoSetupMe<tab>
This fix only works for versions of bash greater than 4.0, before that
"local sfx" creates an empty string, therefore the unset expansion
doesn't work. The same happens in zsh.
Therefore we don't add the test for that for now.
The correct fix for all shells requires semantic changes in __gitcomp,
but that can be done later.
Cc: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise options of commands like 'for-each-ref' are not completed.
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to ignore options that don't start with -- as well.
Depending on the value of COMP_WORDBREAKS the last word could be
duplicated otherwise.
Can be tested with:
git merge -X diff-algorithm=<tab>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>