The scripted version of rebase used to run this hook on the initial
checkout. The transition to built-in introduced a regression.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'quiet' and 'interactive' may sound like antonyms, the interactive
machinery actually has logic that implements several
interactive_rebase=implied cases (--exec, --keep-empty, --rebase-merges)
which won't pop up an editor. The rewrite of interactive rebase in C
added a quiet option, though it only turns stats off. Since we want to
make the interactive machinery also take over for git-rebase--merge, it
should fully implement the --quiet option.
git-rebase--interactive was already somewhat quieter than
git-rebase--merge and git-rebase--am, possibly because cherry-pick has
just traditionally been quieter. As such, we only drop a few
informational messages -- "Rebasing (n/m)" and "Successfully rebased..."
Also, for simplicity, remove the differences in how quiet and verbose
options were recorded. Having one be signalled by the presence of a
"verbose" file in the state_dir, while the other was signalled by the
contents of a "quiet" file was just weirdly inconsistent. (This
inconsistency pre-dated the rewrite into C.) Make them consistent by
having them both key off the presence of the file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit f57696802c ("rebase: really just passthru the `git am`
options", 2018-11-14), the handling of `git am` options was simplified
dramatically (and an option parsing bug was fixed), but it introduced
a small regression in the error message shown when options only
understood by separate backends were used:
$ git rebase --keep --ignore-whitespace
fatal: cannot combine interactive options (--interactive, --exec,
--rebase-merges, --preserve-merges, --keep-empty, --root + --onto) with
am options (.git/rebase-apply/applying)
$ git rebase --merge --ignore-whitespace
fatal: cannot combine merge options (--merge, --strategy,
--strategy-option) with am options (.git/rebase-apply/applying)
Note that in both cases, the list of "am options" is
".git/rebase-apply/applying", which makes no sense. Since the lists of
backend-specific options is documented pretty thoroughly in the rebase
man page (in the "Incompatible Options" section, with multiple links
throughout the document), and since I expect this list to change over
time, just simplify the error message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion of the script version of rebase took messages that were
prefixed with "error:" and passed them along to die(), which adds a
"fatal:" prefix, thus resulting in messages of the form:
fatal: error: cannot combine...
which seems redundant. Remove the "error:" prefix from the builtin
version of rebase, and change the prefix from "error:" to "fatal:" in
the legacy script to match.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a bit cumbersome to write out the `--reschedule-failed-exec`
option before `-x <cmd>` all the time; let's introduce a convenient
option to do both at the same time: `-y <cmd>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It would be cumbersome to type out that option all the time, so let's
offer the convenience of a config setting: rebase.rescheduleFailedExec.
Besides, this opens the door to changing the default in a future version
of Git: it does make some sense to reschedule failed `exec` commands by
default (and if we could go back in time when the `exec` command was
invented, we probably would change that default right from the start).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common use case for the `--exec` option is to verify that each commit
in a topic branch compiles cleanly, via `git rebase -x make <base>`.
However, when an `exec` in such a rebase fails, it is not re-scheduled,
which in this instance is not particularly helpful.
Let's offer a flag to reschedule failed `exec` commands.
Based on an idea by Paul Morelle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --stat" to transplant a piece of history onto a totally
unrelated history were not working before and silently showed wrong
result. With the recent reimplementation in C, it started to instead
die with an error message, as the original logic was not prepared
to cope with this case. This has now been fixed.
* js/rebase-stat-unrelated-fix:
rebase --stat: fix when rebasing to an unrelated history
The whitespace breakages in these messages were introduced while
reimplementing the subcommand in C. Match these messages to those
in the original scripted version.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing to a commit history that has no common commits with the
current branch, there is no merge base. In diffstat mode, this means
that we cannot compare to the merge base, but we have to compare to the
empty tree instead.
Also, if running in verbose diffstat mode, we should not output
Changes from <merge-base> to <onto>
as that does not make sense without any merge base.
Note: neither scripted nor built-in versoin of `git rebase` were
prepared for this situation well. We use this opportunity not only to
fix the bug(s), but also to make both versions' output consistent in
this instance. And add a regression test to keep this working in all
eternity.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of "rebase" honored the `GIT_REFLOG_ACTION`,
and some automation scripts expected the reflog entries to be
prefixed with "rebase -i", not "rebase", after running "rebase -i".
This regressed in the reimplementation in C.
Fix that, and add a regression test, both with `GIT_REFLOG_ACTION`
set and unset.
Note: the reflog message for "rebase finished" did *not* honor
GIT_REFLOG_ACTION, and as we are very late in the v2.20.0-rcN phase,
we leave that bug for later (as it seems that that bug has been with
us from the very beginning).
Reported by Ian Jackson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object name of the tree reported in a recently added error
message was wrong, which has been corrected.
* js/builtin-rebase-perf-fix-err-fix:
rebase: warn about the correct tree's OID
This was a simple copy/paste error, and an obvious one at that: if we
cannot fill the tree descriptor, we should show an error message about
*that* tree, not another one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recently merged "rebase in C" has an escape hatch to use the
scripted version when necessary, but it hasn't been documented,
which has been corrected.
* ab/rebase-in-c-escape-hatch:
tests: add a special setup where rebase.useBuiltin is off
rebase doc: document rebase.useBuiltin
The way "git rebase" parses and forwards the command line options
meant for underlying "git am" has been revamped, which fixed for
options with parameters that were not passed correctly.
* js/rebase-am-options:
rebase: validate -C<n> and --whitespace=<mode> parameters early
rebase: really just passthru the `git am` options
Bugfix for the recently graduated "git rebase --rebase-merges".
* js/rebase-r-and-merge-head:
status: rebase and merge can be in progress at the same time
built-in rebase --skip/--abort: clean up stale .git/<name> files
rebase -i: include MERGE_HEAD into files to clean up
rebase -r: do not write MERGE_HEAD unless needed
rebase -r: demonstrate bug with conflicting merges
Code clean-up with correction to make the reimplemented "git
rebase" a more faithful rewrite of the original, which also regains
performance.
* js/builtin-rebase-perf-fix:
built-in rebase: reinstate `checkout -q` behavior where appropriate
rebase: prepare reset_head() for more flags
rebase: consolidate clean-up code before leaving reset_head()
"git rebase --autostash" did not correctly re-attach the HEAD at times.
* js/rebase-autostash-detach-fix:
built-in rebase --autostash: leave the current branch alone if possible
built-in rebase: demonstrate regression with --autostash
Add a GIT_TEST_REBASE_USE_BUILTIN=false test mode which is equivalent
to running with rebase.useBuiltin=false. This is needed to spot that
we're not introducing any regressions in the legacy rebase version
while we're carrying both it and the new builtin version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good idea to error out early upon seeing, say, `-Cbad`, rather
than starting the rebase only to have the `--am` backend complain later.
Let's do this.
The only options accepting parameters which we pass through to `git am`
(which may, or may not, forward them to `git apply`) are `-C` and
`--whitespace`. The other options we pass through do not accept
parameters, so we do not have to validate them here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we parse the options intended for `git am` as if we wanted to
handle them in `git rebase`, and then reconstruct them painstakingly to
define the `git_am_opt` variable.
However, there is a much better way (that I was unaware of, at the time
when I mentored Pratik to implement these options): OPT_PASSTHRU_ARGV.
It is intended for exactly this use case, where command-line options
want to be parsed into a separate `argv_array`.
Let's use this feature.
Incidentally, this also allows us to address a bug discovered by Phillip
Wood, where the built-in rebase failed to understand that the `-C`
option takes an optional argument.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we converted a `git checkout -q $onto^0` call to use
`reset_head()`, we inadvertently incurred a change from a twoway_merge
to a oneway_merge, as if we wanted a `git reset --hard` instead.
This has performance ramifications under certain, though, as the
oneway_merge needs to lstat() every single index entry whereas
twoway_merge does not.
So let's go back to the old behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we only accept the flag indicating whether the HEAD should be
detached not. In the next commit, we want to introduce another flag: to
toggle between emulating `reset --hard` vs `checkout -q`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same clean-up code is repeated quite a few times; Let's DRY up the
code some.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of the rebase used to execute `git reset --hard`
when skipping or aborting. When we ported this to C, we did update the
worktree and some reflogs, but we failed to imitate `git reset --hard`'s
behavior regarding files in .git/ such as MERGE_HEAD.
Let's address this oversight.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case is more interesting than other boring "remove the_repo"
commits because while we need access to the object database, we cannot
simply use r->index because unpack-trees.c can operate on a temporary
index, not $GIT_DIR/index. Ideally we should be able to pass an object
database to lookup_tree() but that ship has sailed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we converted a `git reset --hard` call in the original Unix shell
script to built-in code, we asked to reset the worktree and the index
and explicitly *not* to detach the HEAD. By mistake, though, we still
did. Let's fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" that has recently been rewritten in C had a few issues
in its "--autstash" feature, which have been corrected.
* js/rebase-autostash-fix:
rebase --autostash: fix issue with dirty submodules
rebase --autostash: demonstrate a problem with dirty submodules
rebase (autostash): use an explicit OID to apply the stash
rebase (autostash): store the full OID in <state-dir>/autostash
rebase (autostash): avoid duplicate call to state_dir_path()
"rebase" that has been rewritten learns the new calling convention
used by "rebase -i" that was rewritten in C, tying the loose end
between two GSoC topics that stomped on each other's toes.
* js/rebase-in-c-5.5-work-with-rebase-i-in-c:
builtin rebase: prepare for builtin rebase -i
Rewrite "git rebase" in C.
* pk/rebase-in-c-5-test:
builtin rebase: error out on incompatible option/mode combinations
builtin rebase: use no-op editor when interactive is "implied"
builtin rebase: show progress when connected to a terminal
builtin rebase: fast-forward to onto if it is a proper descendant
builtin rebase: optionally pass custom reflogs to reset_head()
builtin rebase: optionally auto-detect the upstream
Rewrite "git rebase" in C.
* pk/rebase-in-c-4-opts:
builtin rebase: support --root
builtin rebase: add support for custom merge strategies
builtin rebase: support `fork-point` option
merge-base --fork-point: extract libified function
builtin rebase: support --rebase-merges[=[no-]rebase-cousins]
builtin rebase: support `--allow-empty-message` option
builtin rebase: support `--exec`
builtin rebase: support `--autostash` option
builtin rebase: support `-C` and `--whitespace=<type>`
builtin rebase: support `--gpg-sign` option
builtin rebase: support `--autosquash`
builtin rebase: support `keep-empty` option
builtin rebase: support `ignore-date` option
builtin rebase: support `ignore-whitespace` option
builtin rebase: support --committer-date-is-author-date
builtin rebase: support --rerere-autoupdate
builtin rebase: support --signoff
builtin rebase: allow selecting the rebase "backend"
Rewrite "git rebase" in C.
* pk/rebase-in-c-3-acts:
builtin rebase: stop if `git am` is in progress
builtin rebase: actions require a rebase in progress
builtin rebase: support --edit-todo and --show-current-patch
builtin rebase: support --quit
builtin rebase: support --abort
builtin rebase: support --skip
builtin rebase: support --continue
Rewrite "git rebase" in C.
* pk/rebase-in-c-2-basic:
builtin rebase: support `git rebase <upstream> <switch-to>`
builtin rebase: only store fully-qualified refs in `options.head_name`
builtin rebase: start a new rebase only if none is in progress
builtin rebase: support --force-rebase
builtin rebase: try to fast forward when possible
builtin rebase: require a clean worktree
builtin rebase: support the `verbose` and `diffstat` options
builtin rebase: support --quiet
builtin rebase: handle the pre-rebase hook and --no-verify
builtin rebase: support `git rebase --onto A...B`
builtin rebase: support --onto
Since we cannot stash dirty submodules, there is no use in requiring
them to be clean (or stash them when they are not).
This brings the built-in rebase in line with the previous, scripted
version, which also did not care about dirty submodules (but it was
admittedly not very easy to figure that out).
This fixes https://github.com/git-for-windows/git/issues/1820
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git stash apply <argument>` sees an argument that consists only of
digits, it tries to be smart and interpret it as `stash@{<number>}`.
Unfortunately, an all-digit hash (which is unlikely but still possible)
is therefore misinterpreted as `stash@{<n>}` reflog.
To prevent that from happening, let's append `^0` after the stash hash,
to make sure that it is interpreted as an OID rather than as a number.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported by Gábor Szeder and analyzed by Alban Gruin that the
built-in rebase stores only abbreviated stash hashes in the `autostash`
file.
This is problematic e.g. in t5520-pull.sh, where the abbreviated hash is
so short that it sometimes consists only of digits, which are
subsequently mistaken ("DWIMmed") for numbers by `git stash apply`.
Let's align the behavior of the built-in rebase with the scripted rebase
and store the full stash hash instead. That makes it a lot less likely
that it consists only of digits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already called that function at this point, and stored the result in
the `path` variable. We might just as well use it ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The separator between words in a multi-word option name is a dash,
not an underscore.
Inspired by a matching change by Ralf Thielow for the scripted
version of "git rebase".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the builtin rebase is feature-complete, we should use it by
default. Let's keep the legacy scripted version around for the time
being; Once the builtin rebase is well-tested enough, we can remove
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin rebase and the builtin interactive rebase have been
developed independently, on purpose: Google Summer of Code rules
specifically state that students have to work on independent projects,
they cannot collaborate on the same project.
One fallout is that the rebase-in-c and rebase-i-in-c patches cause no
merge conflicts but a royal number of tests in the test suite to fail.
It is easy to explain why: rebase-in-c was developed under the
assumption that all rebase backends are implemented in Unix shell script
and can be sourced via `. git-rebase--<backend>`, which is no longer
true with rebase-i-in-c, where git-rebase--interactive is a hard-linked
builtin.
This patch fixes that.
Please note that we also skip the finish_rebase() call for interactive
rebases because the built-in interactive rebase already takes care of
that. This is needed to support the upcoming `break` command that wants
to interrupt the rebase with exit code 0 (and naturally wants to keep
the state directory intact when doing so).
While at it, remove the `case` arm for the interactive rebase that is
now skipped in favor of the short-cut to the built-in rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on the GSoC project to convert the rebase command to a
builtin, the rebase command learned to error out on certain command-line
option combinations that cannot work, such as --whitespace=fix with
--interactive.
This commit converts that code.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some options are only handled by the git-rebase--interactive backend,
even if run non-interactively. For this awkward situation (run
non-interactively, but use the interactive backend), the shell scripted
version of `git rebase` introduced the concept of an "implied
interactive rebase". All it does is to replace the editor by a dummy one
(`:` is the Unix command that takes arbitrary command-line parameters,
ignores them and simply exits with success).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we pass `--progress` to the `format-patch` command if
stderr is connected to an interactive terminal, unless we're in quiet
mode.
This `--progress` option will be used in `format-patch` to show progress
reports on stderr as patches are generated.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to rebase onto a direct descendant of HEAD, we can
take a shortcut and fast-forward instead. This commit makes it so.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will make use of that in the code that
fast-forwards to `onto` whenever possible.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git rebase` command, when called without the `<upstream>`
command-line argument, automatically looks for the upstream
branch configured for the current branch.
With this commit, the builtin rebase learned that trick, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows to rebase entire histories up to, and including, the
root commit.
The conversion from the shell script is straight-forward, apart from
the fact that we do not have to write an empty tree in C.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a rebase in non-am mode, it uses the recursive merge to
cherry-pick the commits, and the rebase command allows to configure
the merge strategy to be used in this operation.
This commit adds that support to the builtin rebase.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--fork-point` and `--no-fork-point`.
This is converted as-is from `git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mode to rebase non-linear branches is now supported by the builtin
rebase, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces the `--allow-empty-message` option to
`builtin/rebase.c`. The motivation behind this option is: if there are
empty messages (which is not allowed in Git by default, but can be
imported from different version control systems), the rebase will fail.
Using `--allow-empty-message` overrides that behaviour which will allow
the commits having empty messages to continue in rebase operation.
Note: a very recent change made this the default in the shell scripted
`git rebase`, therefore the builtin rebase does the same.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--exec` option which takes a shell
command-line as argument. This argument will be appended as an `exec
<cmd>` command after each line in the todo list that creates a commit in
the final history. commands.
Note: while the shell script version of `git rebase` assigned the empty
string to `cmd` by default, we *unset* it here because the code looks
nicer and it does not change the behavior.
The `--exec` option requires `--interactive` machinery.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support `--autostash` we introduce a function `apply_autostash()`
just like in `git-legacy-rebase.sh`.
Rather than refactoring and using the same function that exists in
`sequencer.c`, we go a different route here, to avoid clashes with
the sister GSoC project that turns the interactive rebase into a
builtin.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit converts more code from the shell script version to the
builtin rebase. In this instance, we just have to be careful to
keep support for passing multiple `--whitespace` options, as the
shell script version does so, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces support for `--gpg-sign` option which is used
to GPG-sign commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--autosquash` option which is used to
automatically squash the commits marked as `squash` or `fixup` in their
messages. This is converted following `git-legacy-rebase.sh` closely.
This option can also be configured via the Git config setting
rebase.autosquash. To support this, we also add a custom
rebase_config() function in this commit that will be used instead (and
falls back to) git_default_config().
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--keep-empty` option can be used to keep the commits that do not
change anything from its parents in the result.
While the scripted version uses `interactive_rebase=implied` to indicate
that the rebase needs to use the `git-rebase--interactive` backend in
non-interactive mode as fallback when figuring out which backend to use,
the C version needs to use a different route because the backend will
already be chosen during the `parse_options()` call.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--ignore-date` which is passed to `git am`
to easily change the dates of the rebased commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--ignore-whitespace` option
of the rebase command. This option is simply passed to the
`--am` backend.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is simply handed down to `git am` by way of setting the
`git_am_opt` variable that is handled by the `git-rebase--am` backend.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--rerere-autoupdate` option allows rerere to update the index with
resolved conflicts. This commit follows closely the equivalent part of
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--signoff` which is used to add a
`Signed-off-by` trailer to all the rebased commits. The actual
handling is left to the rebase backends.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this commit the builtin rebase supports selecting the "rebase
backends" (or "type") `interactive`, `preserve-merges`, and `merge`.
The `state_dir` was already handled according to the rebase type in a
previous commit.
Note that there is one quirk in the shell script: `--interactive`
followed by `--merge` won't reset the type to "merge" but keeps the type
as "interactive". And as t3418 tests this explicitly, we have to support
it in the builtin rebase, too.
Likewise, `--interactive` followed by `--preserve-merges` makes it an
"explicitly interactive" rebase, i.e. a rebase that should show the todo
list, while `--preserve-merges` alone is not interactive (and t5520
tests for this via `git pull --rebase=preserve`).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit checks for the file `applying` used by `git am` in
`rebase-apply/` and if the file is present it means `git am` is in
progress so it errors out.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit prevents actions (such as --continue, --skip) from running
when there is no rebase in progress.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While these sub-commands are very different in spirit, their
implementation is almost identical, so we convert them in one go.
And since those are the last sub-commands that needed to be converted,
now we can also turn that `default:` case into a bug (because we should
now handle all the actions).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, the builtin rebase handles the `--quit` action which
can be used to abort a rebase without rolling back any changes performed
during the rebase (this is useful when a user forgot that they were in
the middle of a rebase and continued working normally).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches the builtin rebase the "abort" action, which a user
can call to roll back a rebase that is in progress.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds the option `--skip` which is used to restart
rebase after skipping the current patch.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds the option `--continue` which is used to resume
rebase after merge conflicts. The code tries to stay as close to
the equivalent shell scripts found in `git-legacy-rebase.sh` as
possible.
When continuing a rebase, the state variables are read from state_dir.
Some of the state variables are not actually stored there, such as
`upstream`. The shell script version simply does not set them, but for
consistency, we unset them in the builtin version.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `switch-to` which is used to switch to the
target branch if needed. The equivalent codes found in shell script
`git-legacy-rebase.sh` is converted to builtin `rebase.c`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a rebase on a detached HEAD, we currently store the string
"detached HEAD" in options.head_name. That is a faithful translation of
the shell script version, and we still kind of need it for the purposes of
the scripted backends.
It is poor style for C, though, where we would really only want a valid,
fully-qualified ref name as value, and NULL for detached HEADs, using
"detached HEAD" for display only. Make it so.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To run a new rebase, there needs to be a check to assure that no other
rebase is in progress. New rebase operation cannot start until an
ongoing rebase operation completes or is terminated.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we add support to `--force-rebase` option. The
equivalent part of the shell script found in `git-legacy-rebase.sh` is
converted as faithfully as possible to C.
The --force-rebase option ensures that the rebase does not simply
fast-forward even if it could.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we add support to fast forward.
Note: we will need the merge base later, therefore the call to
can_fast_forward() really needs to be the first one when testing whether
we can skip the rebase entirely (otherwise, it would make more sense to
skip the possibly expensive operation if, say, running an interactive
rebase).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit reads the index of the repository for rebase and checks
whether the repository is ready for rebase.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces support for the `-v` and `--stat` options of
rebase.
The --stat option can also be configured via the Git config setting
rebase.stat. To support this, we also add a custom rebase_config()
function in this commit that will be used instead of (and falls back to
calling) git_default_config().
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces a rebase option `--quiet`. While `--quiet` is
commonly perceived as opposite to `--verbose`, this is not the case for
the rebase command: both `--quiet` and `--verbose` default to `false` if
neither `--quiet` nor `--verbose` is present.
Despite the default being `false` for both verbose and quiet mode,
passing the `--quiet` option will turn off verbose mode, and `--verbose`
will turn off quiet mode.
This patch introduces the `flags` bit field, with `REBASE_NO_QUIET`
as first user (with many more to come).
We do *not* use `REBASE_QUIET` here for an important reason: To keep the
implementation simple, this commit introduces `--no-quiet` instead of
`--quiet`, so that a single `OPT_NEGBIT()` can turn on quiet mode and
turn off verbose and diffstat mode at the same time. Likewise, the
companion commit which will introduce support for `--verbose` will have
a single `OPT_BIT()` that turns off quiet mode and turns on verbose and
diffstat mode at the same time.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit converts the equivalent part of the shell script
`git-legacy-rebase.sh` to run the pre-rebase hook (unless disabled), and
to interrupt the rebase with error if the hook fails.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit implements support for an --onto argument that is actually a
"symmetric range" i.e. `<rev1>...<rev2>`.
The equivalent shell script version of the code offers two different
error messages for the cases where there is no merge base vs more than
one merge base.
Though it would be nice to retain this distinction, dropping it makes it
possible to simply use the `get_oid_mb()` function. Besides, it happens
rarely in real-world scenarios.
Therefore, in the interest of keeping the code less complex, let's just
use that function, and live with an error message that does not
distinguish between those two error conditions.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--onto` option is important, as it allows to rebase a range of
commits onto a different base commit (which gave the command its odd
name: "rebase").
This commit introduces options parsing so that different options can
be added in future commits.
Note: As this commit introduces to the parse_options() call (which
"eats" argv[0]), the argc is now expected to be lower by one after this
patch, compared to before this patch: argv[0] no longer refers to the
command name, but to the first (non-option) command-line parameter.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch gives life to the skeleton added in the previous patches:
With this change, we can perform a elementary rebase (without any
options).
It can be tested thusly by:
git -c rebase.usebuiltin=true rebase HEAD~2
The rebase backends (i.e. the shell script functions defined in
`git-rebase--<backend>`) are still at work here and the "builtin
rebase"'s purpose is simply to parse the options and set
everything up so that those rebase backends can do their work.
Note: We take an alternative approach here which is *not* to set the
environment variables via `run_command_v_opt_cd_env()` because those
variables would then be visible by processes spawned from the rebase
backends. Instead, we work hard to set them in the shell script snippet.
On Windows, some of the tests fail merely due to core.fileMode not
being heeded that's why the core.*config variables is parsed here.
The `reset_head()` function is currently only used to detach the HEAD
to onto by way of starting the rebase, but it offers additional
functionality that subsequent patches will need like moving to the
original branch (possibly updating it) and also to do the equivalent of
`git reset --hard`.
The next commits will handle and support all the wonderful rebase
options.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit imitates the strategy that was used to convert the
difftool to a builtin. We start by renaming the shell script
`git-rebase.sh` to `git-legacy-rebase.sh` and introduce a
`builtin/rebase.c` that simply executes the shell script version,
unless the config setting `rebase.useBuiltin` is set to `true`.
The motivation behind this is to rewrite all the functionality of the
shell script version in the aforementioned `rebase.c`, one by one and
be able to conveniently test new features by configuring
`rebase.useBuiltin`.
In the original difftool conversion, if sane_execvp() that attempts to
run the legacy scripted version returned with non-negative status, the
command silently exited without doing anything with success, but
sane_execvp() should not return with non-negative status in the first
place, so we use die() to notice such an abnormal case.
We intentionally avoid reading the config directly to avoid
messing up the GIT_* environment variables when we need to fall back to
exec()ing the shell script. The test of builtin rebase can be done by
`git -c rebase.useBuiltin=true rebase ...`
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
