When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory leaks in various codepaths have been plugged.
* ma/leakplugs:
pack-bitmap[-write]: use `object_array_clear()`, don't leak
object_array: add and use `object_array_pop()`
object_array: use `object_array_clear()`, not `free()`
leak_pending: use `object_array_clear()`, not `free()`
commit: fix memory leak in `reduce_heads()`
builtin/commit: fix memory leak in `prepare_index()`
When a submodule diff should be displayed we currently just add the
submodule objects to the main object store and then e.g. walk the
revision graph and create a summary for that submodule.
It is possible that we are missing the submodule either completely or
partially, which we currently differentiate with different error messages
depending on whether (1) the whole submodule object store is missing or
(2) just the needed for this particular diff. (1) is reported as
"not initialized", and (2) is reported as "commits not present".
If a submodule is deinit'ed its repository data is still around inside
the superproject, such that the diff can still be produced. In that way
the error message (1) is misleading as we can have a diff despite the
submodule being not initialized.
Downgrade the error message (1) to be the same as (2) and just say
the commits are not present, as that is the true reason why the diff
cannot be shown.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Step #0 of a planned & larger series to make the in-core object
store per in-core repository object.
* jn/per-repo-object-store-fixes:
replace-objects: evaluate replacement refs without using the object store
push, fetch: error out for submodule entries not pointing to commits
pack: make packed_git_mru global a value instead of a pointer
Instead of freeing `foo.objects` for an object array `foo` (sometimes
conditionally), call `object_array_clear(&foo)`. This means we don't
poke as much into the implementation, which is already a good thing, but
also that we release the individual entries as well, thereby fixing at
least one memory-leak (in diff-lib.c).
If someone is holding on to a pointer to an element's `name` or `path`,
that is now a dangling pointer, i.e., we'd be turning an unpleasant
situation into an outright bug. To the best of my understanding no such
long-term pointers are being taken.
The way we handle `study` in builting/reflog.c still looks like it might
leak. That will be addressed in the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and friends when multiple worktrees are used off of a
single repository did not consider the index and per-worktree refs
of other worktrees as the root for reachability traversal, making
objects that are in use only in other worktrees to be subject to
garbage collection.
* nd/prune-in-worktree:
refs.c: reindent get_submodule_ref_store()
refs.c: remove fallback-to-main-store code get_submodule_ref_store()
rev-list: expose and document --single-worktree
revision.c: --reflog add HEAD reflog from all worktrees
files-backend: make reflog iterator go through per-worktree reflog
revision.c: --all adds HEAD from all worktrees
refs: remove dead for_each_*_submodule()
refs.c: move for_each_remote_ref_submodule() to submodule.c
revision.c: use refs_for_each*() instead of for_each_*_submodule()
refs: add refs_head_ref()
refs: move submodule slash stripping code to get_submodule_ref_store
refs.c: refactor get_submodule_ref_store(), share common free block
revision.c: --indexed-objects add objects from all worktrees
revision.c: refactor add_index_objects_to_pending()
refs.c: use is_dir_sep() in resolve_gitlink_ref()
revision.h: new flag in struct rev_info wrt. worktree-related refs
The check_has_commit helper uses resolves a submodule entry to a
commit, when validating its existence. As a side effect this means
tolerates a submodule entry pointing to a tag, which is not a valid
submodule entry that git commands would know how to cope with.
Tighten the check to require an actual commit, not a tag pointing to a
commit.
Also improve the error handling when a submodule entry points to
non-commit (e.g., a blob) to error out instead of warning and
pretending the pointed to object doesn't exist.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
"git diff" has been taught to optionally paint new lines that are
the same as deleted lines elsewhere differently from genuinely new
lines.
* sb/diff-color-move: (25 commits)
diff: document the new --color-moved setting
diff.c: add dimming to moved line detection
diff.c: color moved lines differently, plain mode
diff.c: color moved lines differently
diff.c: buffer all output if asked to
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_SUMMARY
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_STAT_SEP
diff.c: convert word diffing to use emit_diff_symbol
diff.c: convert show_stats to use emit_diff_symbol
diff.c: convert emit_binary_diff_body to use emit_diff_symbol
submodule.c: migrate diff output to use emit_diff_symbol
diff.c: emit_diff_symbol learns DIFF_SYMBOL_REWRITE_DIFF
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_BINARY_FILES
diff.c: emit_diff_symbol learns DIFF_SYMBOL_HEADER
diff.c: emit_diff_symbol learns DIFF_SYMBOL_FILEPAIR_{PLUS, MINUS}
diff.c: emit_diff_symbol learns DIFF_SYMBOL_CONTEXT_INCOMPLETE
diff.c: emit_diff_symbol learns DIFF_SYMBOL_WORDS[_PORCELAIN]
diff.c: migrate emit_line_checked to use emit_diff_symbol
diff.c: emit_diff_symbol learns DIFF_SYMBOL_NO_LF_EOF
diff.c: emit_diff_symbol learns DIFF_SYMBOL_CONTEXT_FRAGINFO
...
Unless single_worktree is set, --all now adds HEAD from all worktrees.
Since reachable.c code does not use setup_revisions(), we need to call
other_head_refs_submodule() explicitly there to have the same effect on
"git prune", so that we won't accidentally delete objects needed by some
other HEADs.
A new FIXME is added because we would need something like
int refs_other_head_refs(struct ref_store *, each_ref_fn, cb_data);
in addition to other_head_refs() to handle it, which might require
int get_submodule_worktrees(const char *submodule, int flags);
It could be a separate topic to reduce the scope of this one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --recurse-submodules" has been reworked to give a more
consistent output across submodule boundary (and do its thing
without having to fork a separate process).
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
Conversion from uchar[20] to struct object_id continues.
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
Now that the submodule-config subsystem can lazily read the gitmodules
file we no longer need to explicitly pre-read the gitmodules by calling
'gitmodules_config()' so let's remove it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate the functions used to initialize the submodule-config to
submodule-config.c so that the callback routine used in the
initialization process can be static and prevent it from being used
outside of initializing the submodule-config through the main API.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the last remaining caller of 'submodule_config()' as well as the
function itself.
With 'submodule_config()' being removed the submodule-config API can be
a little simpler as callers don't need to worry about whether or not
they need to overlay the repository's config on top of the
submodule-config. This also makes it more difficult to accidentally
add non-submodule specific configuration to the .gitmodules file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'submodule.update' config was historically used and respected by the
'submodule update' command because update handled a variety of different
ways it updated a submodule. As we begin teaching other commands about
submodules it makes more sense for the different settings of
'submodule.update' to be handled by the individual commands themselves
(checkout, rebase, merge, etc) so it shouldn't be respected by the
native checkout command.
Also remove the overlaying of the repository's config (via using
'submodule_config()') from the commands which use the unpack-trees
logic (checkout, read-tree, reset).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directory for
the ignore field.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
fetch_recurse field.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't rely on overlaying the repository's config on top of the
submodule-config, instead query the repository's config directly for the
url and the update strategy configuration.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function 'submodule_from_name()' is being used incorrectly here as a
submodule path is being used instead of a submodule name. Since the
correct function to use with a path to a submodule is already being used
('submodule_from_path()') let's remove the call to
'submodule_from_name()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id:
sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ
sha1_name: convert GET_SHA1* flags to GET_OID*
sha1_name: convert get_sha1* to get_oid*
Convert remaining callers of get_sha1 to get_oid.
builtin/unpack-file: convert to struct object_id
bisect: convert bisect_checkout to struct object_id
builtin/update_ref: convert to struct object_id
sequencer: convert to struct object_id
remote: convert struct push_cas to struct object_id
submodule: convert submodule config lookup to use object_id
builtin/merge-tree: convert remaining caller of get_sha1 to object_id
builtin/fsck: convert remaining caller of get_sha1 to object_id
tag: convert gpg_verify_tag to use struct object_id
commit: convert lookup_commit_graft to struct object_id
Since 69aba5329 (submodule: add repo_read_gitmodules) there have been
two ways to load a repository's .gitmodules file:
'repo_read_gitmodules()' is used if you have a repository object you are
working with or 'gitmodules_config()' if you are implicitly working with
'the_repository'. Merge the logic of these two functions to remove
duplicate code.
In addition, 'repo_read_gitmodules()' can segfault by passing in a NULL
pointer to 'git_config_from_file()' if a repository doesn't have a
worktree. Instead check for the existence of a worktree before
attempting to load the .gitmodules file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'is_gitmodules_unmerged()' function which can be used to determine
in the '.gitmodules' file is unmerged based on the passed in index
instead of relying on a global variable which is set during the
submodule-config parsing.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'is_staging_gitmodules_ok()' to be able to determine in the
'.gitmodules' file has unstaged changes based on the passed in index
instead of relying on a global variable which is set during the
submodule-config parsing.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'fetch.recursesubmodules' configuration option from the
general submodule-config parsing and instead rely on using
'config_from_gitmodules()' in order to maintain backwards compatibility
with this config being placed in the '.gitmodules' file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '.gitmodules' file should only contain information pertinent to
configuring individual submodules (name to path mapping, URL where to
obtain the submodule, etc.) while other configuration like the number of
jobs to use when fetching submodules should be a part of the
repository's config.
Remove the 'submodule.fetchjobs' configuration option from the general
submodule-config parsing and instead rely on using the
'config_from_gitmodules()' in order to maintain backwards compatibility
with this config being placed in the '.gitmodules' file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a macro to be used when specifying the '.gitmodules' file and
convert any existing hard coded '.gitmodules' file strings to use the
new macro.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is on a branch and in its superproject you run a
recursive checkout, the branch of the submodule is updated to what the
superproject checks out. This is very unexpected in the current model of
Git as e.g. 'submodule update' always detaches the submodule HEAD.
Despite having plans to have submodule HEADS not detached in the future,
the current behavior is really bad as it doesn't match user expectations
and it is not checking for loss of commits (only to be recovered via the
reflog).
Detach the HEAD unconditionally in the submodule when updating it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 06bf4ad1d (push: propagate remote and refspec with
--recurse-submodules) push was taught how to propagate a refspec down to
submodules when the '--recurse-submodules' flag is given. The only refspecs
that are allowed to be propagated are ones which name a ref which exists
in both the superproject and the submodule, with the caveat that 'HEAD'
was disallowed.
This patch teaches push-check (the submodule helper which determines if
a refspec can be propagated to a submodule) to permit propagating 'HEAD'
if and only if the superproject and the submodule both have the same
named branch checked out and the submodule is not in a detached head
state.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase --recurse-submodules" learns to rebase the
branch in the submodules to an updated base.
* sb/pull-rebase-submodule:
builtin/fetch cleanup: always set default value for submodule recursing
pull: optionally rebase submodules (remote submodule changes only)
builtin/fetch: parse recurse-submodules-default at default options parsing
builtin/fetch: factor submodule recurse parsing out to submodule config
Introduce a "repository" object to eventually make it easier to
work in multiple repositories (the primary focus is to work with
the superproject and its submodules) in a single process.
* bw/repo-object:
ls-files: use repository object
repository: enable initialization of submodules
submodule: convert is_submodule_initialized to work on a repository
submodule: add repo_read_gitmodules
submodule-config: store the_submodule_cache in the_repository
repository: add index_state to struct repo
config: read config from a repository object
path: add repo_worktree_path and strbuf_repo_worktree_path
path: add repo_git_path and strbuf_repo_git_path
path: worktree_git_path() should not use file relocation
path: convert do_git_path to take a 'struct repository'
path: convert strbuf_git_common_path to take a 'struct repository'
path: always pass in commondir to update_common_dir
path: create path.h
environment: store worktree in the_repository
environment: place key repository state in the_repository
repository: introduce the repository object
environment: remove namespace_len variable
setup: add comment indicating a hack
setup: don't perform lazy initialization of repository state
As the submodule process is no longer attached to the same file pointer
'o->file' as the superprojects process, there is a different result in
color.c::check_auto_color. That is why we need to pass coloring explicitly,
such that the submodule coloring decision will be made by the child process
processing the submodule. Only DIFF_SYMBOL_SUBMODULE_PIPETHROUGH contains
color, the other symbols are for embedding the submodule output into the
superprojects output.
Remove the colors from the function signatures, as all the coloring
decisions will be made either inside the child process or the final
emit_diff_symbol, but not in the functions driving the submodule diff.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Convert 'is_submodule_initialized()' to take a repository object and
while we're at it, lets rename the function to 'is_submodule_active()'
and remove the NEEDSWORK comment.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the repo object to be able to populate the submodule_cache by
reading the repository's gitmodules file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
Teach pull to optionally update submodules when '--recurse-submodules'
is provided. This will teach pull to run 'submodule update --rebase'
when the '--recurse-submodules' and '--rebase' flags are given under
specific circumstances.
On a rebase workflow:
=====================
1. Both sides change the submodule
------------------------------
Let's assume the following history in a submodule:
H---I---J---K---L local branch
\
M---N---O---P remote branch
and the following in the superproject (recorded submodule in parens):
A(H)---B(I)---F(K)---G(L) local branch
\
C(N)---D(N)---E(P) remote branch
In an ideal world this would rebase the submodule and rewrite
the submodule pointers that the superproject points at such that
the superproject looks like
A(H)---B(I) F(K')---G(L') rebased branch
\ /
C(N)---D(N)---E(P) remote branch
and the submodule as:
J---K---L (old dangeling tip)
/
H---I J'---K'---L' rebased branch
\ /
M---N---O---P remote branch
And if a conflict arises in the submodule the superproject rebase
would stop at that commit at which the submodule conflict occurs.
Currently a "pull --rebase" in the superproject produces
a merge conflict as the submodule pointer changes are
conflicting and cannot be resolved.
2. Local submodule changes only
-----------------------
Assuming histories as above, except that the remote branch
would not contain submodule changes, then a result as
A(H)---B(I) F(K)---G(L) rebased branch
\ /
C(I)---D(I)---E(I) remote branch
is desire-able. This is what currently happens in rebase.
If the recursive flag is given, the ideal git would
produce a superproject as:
A(H)---B(I) F(K')---G(L') rebased branch (incl. sub rebase!)
\ /
C(I)---D(I)---E(I) remote branch
and the submodule as:
J---K---L (old dangeling tip)
/
H---I J'---K'---L' locally rebased branch
\ /
M---N---O---P advanced branch
This patch doesn't address this issue, however
a test is added that this fails up front.
3. Remote submodule changes only
----------------------
Assuming histories as in (1) except that the local superproject branch
would not have touched the submodule the rebase already works out in the
superproject with no conflicts:
A(H)---B(I) F(P)---G(P) rebased branch (no sub changes)
\ /
C(N)---D(N)---E(P) remote branch
The recurse flag as presented in this patch would additionally
update the submodule as:
H---I J'---K'---L' rebased branch
\ /
M---N---O---P remote branch
As neither J, K, L nor J', K', L' are referred to from the superproject,
no rewriting of the superproject commits is required.
Conclusion for 'pull --rebase --recursive'
-----------------------------------------
If there are no local superproject changes it is sufficient to call
"submodule update --rebase" as this produces the desired results. In case
of conflicts, the behavior is the same as in 'submodule update --recursive'
which is assumed to be sane.
This patch implements (3) only.
On a merge workflow:
====================
We'll start off with the same underlying DAG as in (1) in the rebase
workflow. So in an ideal world a 'pull --merge --recursive' would
produce this:
H---I---J---K---L----X
\ /
M---N---O---P
with X as the new merge-commit in the submodule and the superproject
as:
A(H)---B(I)---F(K)---G(L)---Y(X)
\ /
C(N)---D(N)---E(P)
However modifying the submodules on the fly is not supported in git-merge
such that Y(X) is not easy to produce in a single patch. In fact git-merge
doesn't know about submodules at all.
However when at least one side does not contain commits touching the
submodule at all, then we do not need to perform the merge for the
submodule but a fast-forward can be done via checking out either L or P
in the submodule. This strategy is implemented in 68d03e4a6e (Implement
automatic fast-forward merge for submodules, 2010-07-07) already, so
to align with the rebase behavior we need to also update the worktree
of the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many commands learned to pay attention to submodule.recurse
configuration.
* sb/submodule-blanket-recursive:
builtin/fetch.c: respect 'submodule.recurse' option
builtin/push.c: respect 'submodule.recurse' option
builtin/grep.c: respect 'submodule.recurse' option
Introduce 'submodule.recurse' option for worktree manipulators
submodule loading: separate code path for .gitmodules and config overlay
reset/checkout/read-tree: unify config callback for submodule recursion
submodule test invocation: only pass additional arguments
submodule recursing: do not write a config variable twice
Any command that understands '--recurse-submodules' can have its
default changed to true, by setting the new 'submodule.recurse'
option.
This patch includes read-tree/checkout/reset for working tree
manipulating commands. Later patches will cover other commands.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .gitmodules file is not supposed to have all the options available,
that are available in the configuration so separate it out.
A configuration option such as the hypothetical submodule.color.diff
that determines in which color a submodule change is printed,
is a very user specific thing, that the .gitmodules file should
not tamper with.
The .gitmodules file should only be used for settings that required
to setup the project in which the .gitmodules file is tracked. As the
minimum this would only include the name<->path mapping of the
submodule and its URL and branch.
Any further setting (such as 'fetch.recursesubmodules' or
'submodule.<name>.{update, ignore, shallow}') is not specific
to the project setup requirements, but rather is a distribution
of suggested developer configurations. In other areas of Git
a suggested developer configuration is not transported in-tree
but via other means. In an organisation this could be done
by deploying an opinionated system wide config (/etc/gitconfig)
or by putting the settings in the users home directory when
they start at the organisation. In open source projects this
is often accomplished via extensive READMEs (cf. our
SubmittingPatches/CodingGuidlines).
As a later patch in this series wants to introduce
a generic submodule recursion option, we want to make
sure that switch is not exposed via the gitmodules file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback function is essentially duplicated 3 times. Remove all
of them and offer a new callback function, that lives in submodule.c
By putting the callback function there, we no longer need the function
'set_config_update_recurse_submodules', nor duplicate the global variable
in each builtin as well as submodule.c
In the three builtins we have different 2 ways how to load the .gitmodules
and config file, which are slightly different. git-checkout has to load
the submodule config all the time due to 23b4c7bcc5 (checkout: Use
submodule.*.ignore settings from .git/config and .gitmodules, 2010-08-28)
git-reset and git-read-tree do not respect these diff settings, so loading
the submodule configuration is optional. Also put that into submodule.c
for code deduplication.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify parse_pathspec() codepath and stop it from looking at the
default in-core index.
* bw/pathspec-sans-the-index:
pathspec: convert find_pathspecs_matching_against_index to take an index
pathspec: remove PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP
ls-files: prevent prune_cache from overeagerly pruning submodules
pathspec: remove PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE flag
submodule: add die_in_unpopulated_submodule function
pathspec: provide a more descriptive die message
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
"git checkout --recurse-submodules" did not quite work with a
submodule that itself has submodules.
* sb/checkout-recurse-submodules:
submodule: properly recurse for read-tree and checkout
submodule: avoid auto-discovery in new working tree manipulator code
submodule_move_head: reuse child_process structure for futher commands
Since (ae8d08242 pathspec: pass directory indicator to
match_pathspec_item()) the path matching logic has been able to cope
with submodules without needing to strip off a trailing slash if a path
refers to a submodule.
Since the stripping the trailing slash is no longer necessary, remove
the PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE flag. In addition, factor
out the logic which dies if a path decends into a submodule so that it
can still be used as a check after a pathspec struct has been
initialized.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git add' is the only command which dies when launched from an
unpopulated submodule (the place-holder directory for a submodule which
hasn't been checked out). This is triggered implicitly by passing the
PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE flag to 'parse_pathspec()'.
Instead make this desire more explicit by creating a function
'die_in_unpopulated_submodule()' which dies if the provided 'prefix' has
a leading path component which matches a submodule in the the index.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a small number of remaining callers of lookup_commit_reference
and lookup_commit_reference_gently that still need to be converted to
struct object_id. Convert these.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a caller of lookup_commit_reference, which we will convert
later.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fd47ae6a5b (diff: teach diff to display submodule difference with an
inline diff, 2016-08-31) was introduced, we did not think of recursing
into nested submodules.
When showing the inline diff for submodules, automatically recurse
into nested submodules as well with inline submodule diffs.
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to prepare the submodule env, which is only a problem for
nested submodules. See 2e5d6503bd (ls-files: fix recurse-submodules
with nested submodules, 2017-04-13) for further explanation.
To come up with a proper test for this, we'd need to look at nested
submodules just as in that given commit. It turns out we're lucky
and these tests already exist, but are marked as failing. We need
to pass `--recurse-submodules` to read-tree additionally to make
these tests pass. Passing that flag alone would not make the tests
pass, such that this covers testing for the bug fix of the submodule
env as well.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All commands that are run in a submodule, are run in a correct setup,
there is no need to prepare the environment without setting the GIT_DIR
variable. By setting the GIT_DIR variable we fix issues as discussed in
10f5c52656 (submodule: avoid auto-discovery in
prepare_submodule_repo_env(), 2016-09-01)
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not need to declare another struct child_process, but we can just
reuse the existing `cp` struct.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are currently two instances (fetch and push) where we want to
determine if submodules have changed given some revision specification.
These two instances don't use the same logic to generate a list of
changed submodules and as a result there is a fair amount of code
duplication.
This patch refactors these two code paths such that they both use the
same logic to generate a list of changed submodules. This also makes it
easier for future callers to be able to reuse this logic as they only
need to create an argv_array with the revision specification to be using
during the revision walk.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'submodule_has_commits()' to ensure that if a commit exists in a
submodule, that it is also reachable from a ref.
This is a preparatory step prior to merging the logic which checks for
changed submodules when fetching or pushing.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eliminate a call to 'xstrdup()' by changing the string_list
'changed_submodule_paths' to duplicated strings added to it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function 'add_oid_to_argv()' provides the same functionality as
'append_oid_to_argv()'. Remove this duplicate function and instead use
'append_oid_to_argv()' where 'add_oid_to_argv()' was previously used.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename 'free_submodules_sha1s()' to 'free_submodules_oids()' since the
function frees a 'struct string_list' which has a 'struct oid_array'
stored in the 'util' field.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename 'add_sha1_to_array()' to 'append_oid_to_array()' to more
accurately describe what the function does, since it handles
'struct object_id' and not sha1 character arrays.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "submodule" specific field in the ref_store structure is
replaced with a more generic "gitdir" that can later be used also
when dealing with ref_store that represents the set of refs visible
from the other worktrees.
* nd/files-backend-git-dir: (28 commits)
refs.h: add a note about sorting order of for_each_ref_*
t1406: new tests for submodule ref store
t1405: some basic tests on main ref store
t/helper: add test-ref-store to test ref-store functions
refs: delete pack_refs() in favor of refs_pack_refs()
files-backend: avoid ref api targeting main ref store
refs: new transaction related ref-store api
refs: add new ref-store api
refs: rename get_ref_store() to get_submodule_ref_store() and make it public
files-backend: replace submodule_allowed check in files_downcast()
refs: move submodule code out of files-backend.c
path.c: move some code out of strbuf_git_path_submodule()
refs.c: make get_main_ref_store() public and use it
refs.c: kill register_ref_store(), add register_submodule_ref_store()
refs.c: flatten get_ref_store() a bit
refs: rename lookup_ref_store() to lookup_submodule_ref_store()
refs.c: introduce get_main_ref_store()
files-backend: remove the use of git_path()
files-backend: add and use files_ref_path()
files-backend: add and use files_reflog_path()
...
"git push --recurse-submodules --push-option=<string>" learned to
propagate the push option recursively down to pushes in submodules.
* bw/push-options-recursively-to-submodules:
push: propagate remote and refspec with --recurse-submodules
submodule--helper: add push-check subcommand
remote: expose parse_push_refspec function
push: propagate push-options with --recurse-submodules
push: unmark a local variable as static
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
The output from "git status --short" has been extended to show
various kinds of dirtyness in submodules differently; instead of to
"M" for modified, 'm' and '?' can be shown to signal changes only
to the working tree of the submodule but not the commit that is
checked out.
* sb/submodule-short-status:
submodule.c: correctly handle nested submodules in is_submodule_modified
short status: improve reporting for submodule changes
submodule.c: stricter checking for submodules in is_submodule_modified
submodule.c: port is_submodule_modified to use porcelain 2
submodule.c: convert is_submodule_modified to use strbuf_getwholeline
submodule.c: factor out early loop termination in is_submodule_modified
submodule.c: use argv_array in is_submodule_modified
Early on in submodule_move_head just after the check if the submodule is
initialized, we need to check if the submodule is populated correctly.
If the submodule is initialized but doesn't look like it is populated,
this is a red flag and can indicate multiple sorts of failures:
(1) The submodule may be recorded at an object name, that is missing.
(2) The submodule '.git' file link may be broken and it is not pointing
at a repository.
In both cases we want to complain to the user in the non-forced mode,
and in the forced mode ignoring the old state and just moving the
submodule into its new state with a fixed '.git' file link.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an oversight when working on the working tree modifying commands
recursing into submodules.
To test for uninitialized submodules, introduce another submodule
"uninitialized_sub". Adding it via `submodule add` will activate the
submodule in the preparation area (in create_lib_submodule_repo we
setup all the things in submodule_update_repo), but the later tests
will use a new testing repo that clones the preparation repo
in which the new submodule is not initialized.
By adding it to the branch "add_sub1", which is the starting point of
all other branches, we have wide coverage.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --submodule=diff" learned to work better in a project
with a submodule that in turn has its own submodules.
* sb/show-diff-for-submodule-in-diff-fix:
diff: submodule inline diff to initialize env array.
Code clean-up.
* jk/snprintf-cleanups:
daemon: use an argv_array to exec children
gc: replace local buffer with git_path
transport-helper: replace checked snprintf with xsnprintf
convert unchecked snprintf into xsnprintf
combine-diff: replace malloc/snprintf with xstrfmt
replace unchecked snprintf calls with heap buffers
receive-pack: print --pack-header directly into argv array
name-rev: replace static buffer with strbuf
create_branch: use xstrfmt for reflog message
create_branch: move msg setup closer to point of use
avoid using mksnpath for refs
avoid using fixed PATH_MAX buffers for refs
fetch: use heap buffer to format reflog
tag: use strbuf to format tag header
diff: avoid fixed-size buffer for patch-ids
odb_mkstemp: use git_path_buf
odb_mkstemp: write filename into strbuf
do not check odb_mkstemp return value for errors
Teach "push --recurse-submodules" to propagate, if given a name as remote, the
provided remote and refspec recursively to the pushes performed in the
submodules. The push will therefore only succeed if all submodules have a
remote with such a name configured.
Note that "push --recurse-submodules" with a path or URL as remote will not
propagate the remote or refspec and instead use the default remote and refspec
configured in the submodule, preserving the current behavior.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach push --recurse-submodules to propagate push-options recursively to
the pushes performed in the submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David reported:
> When I try to run `git diff --submodule=diff` in a submodule which has
> it's own submodules that have changes I get the error: fatal: bad
> object.
This happens, because we do not properly initialize the environment
in which the diff is run in the submodule. That means we inherit the
environment from the main process, which sets environment variables.
(Apparently we do set environment variables which we do not set
when not in a submodules, i.e. the .git directory is linked)
This commit, just like fd47ae6a5b (diff: teach diff to display
submodule difference with an inline diff, 2016-08-31) introduces bad
test code (i.e. hard coded hash values), which will be cleanup up in
a later patch.
Reported-by: David Parrish <daveparrish@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These calls to snprintf should always succeed, because their
input is small and fixed. Let's use xsnprintf to make sure
this is the case (and to make auditing for actual truncation
easier).
These could be candidates for turning into heap buffers, but
they fall into a few broad categories that make it not worth
doing:
- formatting single numbers is simple enough that we can
see the result should fit
- the size of a sha1 is likewise well-known, and I didn't
want to cause unnecessary conflicts with the ongoing
process to convert these constants to GIT_MAX_HEXSZ
- the interface for curl_errorstr is dictated by curl
Signed-off-by: Jeff King <peff@peff.net>
"what URL do we want to update this submodule?" and "are we
interested in this submodule?" are split into two distinct
concepts, and then the way used to express the latter got extended,
paving a way to make it easier to manage a project with many
submodules and make it possible to later extend use of multiple
worktrees for a project with submodules.
* bw/submodule-is-active:
submodule add: respect submodule.active and submodule.<name>.active
submodule--helper init: set submodule.<name>.active
clone: teach --recurse-submodules to optionally take a pathspec
submodule init: initialize active submodules
submodule: decouple url and submodule interest
submodule--helper clone: check for configured submodules using helper
submodule sync: use submodule--helper is-active
submodule sync: skip work for inactive submodules
submodule status: use submodule--helper is-active
submodule--helper: add is-active subcommand
Suppose I have a superproject 'super', with two submodules 'super/sub'
and 'super/sub1'. 'super/sub' itself contains a submodule
'super/sub/subsub'. Now suppose I run, from within 'super':
echo hi >sub/subsub/stray-file
echo hi >sub1/stray-file
Currently we get would see the following output in git-status:
git status --short
m sub
? sub1
With this patch applied, the untracked file in the nested submodule is
displayed as an untracked file on the 'super' level as well.
git status --short
? sub
? sub1
This doesn't change the output of 'git status --porcelain=1' for nested
submodules, because its output is always ' M' for either untracked files
or local modifications no matter the nesting level of the submodule.
'git status --porcelain=2' is affected by this change in a nested
submodule, though. Without this patch it would report the direct submodule
as modified and having no untracked files. With this patch it would report
untracked files. Chalk this up as a bug fix.
This bug fix also affects the default output (non-short, non-porcelain)
of git-status, which is not tested here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" is taught the "--recurse-submodules" option.
* sb/checkout-recurse-submodules:
builtin/read-tree: add --recurse-submodules switch
builtin/checkout: add --recurse-submodules switch
entry.c: create submodules when interesting
unpack-trees: check if we can perform the operation for submodules
unpack-trees: pass old oid to verify_clean_submodule
update submodules: add submodule_move_head
submodule.c: get_super_prefix_or_empty
update submodules: move up prepare_submodule_repo_env
submodules: introduce check to see whether to touch a submodule
update submodules: add a config option to determine if submodules are updated
update submodules: add submodule config parsing
make is_submodule_populated gently
lib-submodule-update.sh: define tests for recursing into submodules
lib-submodule-update.sh: replace sha1 by hash
lib-submodule-update: teach test_submodule_content the -C <dir> flag
lib-submodule-update.sh: do not use ./. as submodule remote
lib-submodule-update.sh: reorder create_lib_submodule_repo
submodule--helper.c: remove duplicate code
connect_work_tree_and_git_dir: safely create leading directories
All of the callers of this function have been converted, so convert this
function and update the callers. This function also calls
sha1_array_append, which we'll convert shortly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs is learning to avoid path rewriting that is done by
strbuf_git_path_submodule(). Factor out this code so it could be reused
by refs_* functions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By having a stricter check in the superproject we catch errors earlier,
instead of spawning a child process to tell us.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate 'is_submodule_modified' to the new porcelain format of
git-status. This conversion attempts to convert faithfully, i.e.
the behavior ought to be exactly the same.
As the output in the parsing only distinguishes between untracked files
and the rest, this is easy to port to the new format, as we only
need to identify untracked files and the rest is handled in the "else"
case.
untracked files are indicated by only a single question mark instead of
two question marks, so the conversion is easy.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of implementing line reading yet again, make use of our beautiful
library function to read one line. By using strbuf_getwholeline instead
of strbuf_read, we avoid having to allocate memory for the entire child
process output at once. That is, we limit maximum memory usage.
Also we can start processing the output as it comes in, no need to
wait for all of it.
Once we know all information that we care about, we can terminate
the child early. In that case we do not care about its exit code as well.
By just closing our side of the pipe the child process will get a SIGPIPE
signal, which it will not report nor do we report it in finish_command,
ac78663b0d (run-command: don't warn on SIGPIPE deaths, 2015-12-29).
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier for a follow up patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
struct argv_array is easier to use and maintain.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the submodule.<name>.url config option is used to determine if
a given submodule is of interest to the user. This ends up being
cumbersome in a world where we want to have different submodules checked
out in different worktrees or a more generalized mechanism to select
which submodules are of interest.
In a future with worktree support for submodules, there will be multiple
working trees, each of which may only need a subset of the submodules
checked out. The URL (which is where the submodule repository can be
obtained) should not differ between different working trees.
It may also be convenient for users to more easily specify groups of
submodules they are interested in as opposed to running "git submodule
init <path>" on each submodule they want checked out in their working
tree.
To this end two config options are introduced, submodule.active and
submodule.<name>.active. The submodule.active config holds a pathspec
that specifies which submodules should exist in the working tree. The
submodule.<name>.active config is a boolean flag used to indicate if
that particular submodule should exist in the working tree.
Its important to note that submodule.active functions differently than
the other configuration options since it takes a pathspec. This allows
users to adopt at least two new workflows:
1. Submodules can be grouped with a leading directory, such that a
pathspec e.g. 'lib/' would cover all library-ish modules to allow
those who are interested in library-ish modules to set
"submodule.active = lib/" just once to say any and all modules in
'lib/' are interesting.
2. Once the pathspec-attribute feature is invented, users can label
submodules with attributes to group them, so that a broad pathspec
with attribute requirements, e.g. ':(attr:lib)', can be used to say
any and all modules with the 'lib' attribute are interesting.
Since the .gitattributes file, just like the .gitmodules file, is
tracked by the superproject, when a submodule moves in the
superproject tree, the project can adjust which path gets the
attribute in .gitattributes, just like it can adjust which path has
the submodule in .gitmodules.
Neither of these two additional configuration options solve the problem
of wanting different submodules checked out in different worktrees
because multiple worktrees share .git/config. Only once per-worktree
configurations become a reality can this be solved, but this is a
necessary preparatory step for that future.
Given these multiple ways to check if a submodule is of interest, the
more fine-grained submodule.<name>.active option has the highest order
of precedence followed by the pathspec check against submodule.active.
To ensure backwards compatibility, if neither of these options are set,
git falls back to checking the submodule.<name>.url option to determine
if a submodule is interesting.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From a working tree of a repository, a new option of "rev-parse"
lets you ask if the repository is used as a submodule of another
project, and where the root level of the working tree of that
project (i.e. your superproject) is.
* sb/rev-parse-show-superproject-root:
rev-parse: add --show-superproject-working-tree
In later patches we introduce the options and flag for commands
that modify the working directory, e.g. git-checkout.
This piece of code will be used universally for
all these working tree modifications as it
* supports dry run to answer the question:
"Is it safe to change the submodule to this new state?"
e.g. is it overwriting untracked files or are there local
changes that would be overwritten?
* supports a force flag that can be used for resetting
the tree.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we need to use the super_prefix, and
in case it is NULL we can just assume it is empty.
Create a helper function for this.
We already have some use cases for this helper function,
convert them, too.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we need to prepare the submodule environment with
another git directory, so split up the function.
Also move it up in the file such that we do not need to declare the
function later before using it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In later patches we introduce the --recurse-submodule flag for commands
that modify the working directory, e.g. git-checkout.
It is potentially expensive to check if a submodule needs an update,
because a common theme to interact with submodules is to spawn a child
process for each interaction.
So let's introduce a function that checks if a submodule needs
to be checked for an update before attempting the update.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In later patches we introduce the options and flag for commands
that modify the working directory, e.g. git-checkout.
Have a central place to store such settings whether we want to update
a submodule.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need the gentle version in a later patch. As we have just one caller,
migrate the caller.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we'll use connect_work_tree_and_git_dir when the
directory for the gitlink file doesn't exist yet. This patch makes
connect_work_tree_and_git_dir safe to use for both cases of
either the git dir or the working dir missing.
To do so, we need to call safe_create_leading_directories[_const]
on both directories. However this has to happen before we construct
the absolute paths as real_pathdup assumes the directories to
be there already.
So for both the config file in the git dir as well as the .git link
file we need to
a) construct the name
b) call SCLD
c) get the absolute path
d) once a-c is done for both we can consume the absolute path
to compute the relative path to each other and store those
relative paths.
The implementation provided here puts a) and b) for both cases first,
and then performs c and d after.
One of the two users of 'connect_work_tree_and_git_dir' already checked
for the directory being there, so we can loose that check as
connect_work_tree_and_git_dir handles this functionality now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some situations it is useful to know if the given repository
is a submodule of another repository.
Add the flag --show-superproject-working-tree to git-rev-parse
to make it easy to find out if there is a superproject. When no
superproject exists, the output will be empty.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 4ac9006f83 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider having a submodule 'sub' and a nested submodule at 'sub/nested'.
When nested is already absorbed into sub, but sub is not absorbed into
its superproject, then we need to fixup the gitfile and core.worktree
setting for 'nested' when absorbing 'sub', but we do not need to move
its git dir around.
Previously 'nested's gitfile contained "gitdir: ../.git/modules/nested";
it has to be corrected to "gitdir: ../../.git/modules/sub1/modules/nested".
An alternative I considered to do this work lazily, i.e. when resolving
"../.git/modules/nested", we would notice the ".git" being a gitfile
linking to another path. That seemed to be robuster by design, but harder
to get the implementation right. Maybe we have to do that anyway once we
try to have submodules and worktrees working nicely together, but for now
just produce 'correct' (i.e. direct) pointers.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rm" used to refuse to remove a submodule when it has its own
git repository embedded in its working tree. It learned to move
the repository away to $GIT_DIR/modules/ of the superproject
instead, and allow the submodule to be deleted (as long as there
will be no loss of local modifications, that is).
* sb/submodule-rm-absorb:
rm: absorb a submodules git dir before deletion
submodule: rename and add flags to ok_to_remove_submodule
submodule: modernize ok_to_remove_submodule to use argv_array
submodule.h: add extern keyword to functions
"git grep" has been taught to optionally recurse into submodules.
* bw/grep-recurse-submodules:
grep: search history of moved submodules
grep: enable recurse-submodules to work on <tree> objects
grep: optionally recurse into submodules
grep: add submodules as a grep source type
submodules: load gitmodules file from commit sha1
submodules: add helper to determine if a submodule is initialized
submodules: add helper to determine if a submodule is populated
real_path: canonicalize directory separators in root parts
real_path: have callers use real_pathdup and strbuf_realpath
real_path: create real_pathdup
real_path: convert real_path_internal to strbuf_realpath
real_path: resolve symlinks by hand
"git push --dry-run --recurse-submodule=on-demand" wasn't
"--dry-run" in the submodules.
* bw/push-dry-run:
push: fix --dry-run to not push submodules
push: --dry-run updates submodules when --recurse-submodules=on-demand
The code in "git push" to compute if any commit being pushed in the
superproject binds a commit in a submodule that hasn't been pushed
out was overly inefficient, making it unusable even for a small
project that does not have any submodule but have a reasonable
number of refs.
* hv/submodule-not-yet-pushed-fix:
submodule_needs_pushing(): explain the behaviour when we cannot answer
batch check whether submodule needs pushing into one call
serialize collection of refs that contain submodule changes
serialize collection of changed submodules
A new submodule helper "git submodule embedgitdirs" to make it
easier to move embedded .git/ directory for submodules in a
superproject to .git/modules/ (and point the latter with the former
that is turned into a "gitdir:" file) has been added.
* sb/submodule-embed-gitdir:
worktree: initialize return value for submodule_uses_worktrees
submodule: add absorb-git-dir function
move connect_work_tree_and_git_dir to dir.h
worktree: check if a submodule uses worktrees
test-lib-functions.sh: teach test_commit -C <dir>
submodule helper: support super prefix
submodule: use absolute path for computing relative path connecting
In C code we have the luxury of having constants for all the important
things that are hard coded. This is the only place in C that hard codes
the git directory environment variable, so fix it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In different contexts the question "Is it ok to delete a submodule?"
may be answered differently.
In 293ab15eea (submodule: teach rm to remove submodules unless they
contain a git directory, 2012-09-26) a case was made that we can safely
ignore ignored untracked files for removal as we explicitely ask for the
removal of the submodule.
In a later patch we want to remove submodules even when the user doesn't
explicitly ask for it (e.g. checking out a tree-ish in which the submodule
doesn't exist). In that case we want to be more careful when it comes
to deletion of untracked files. As of this patch it is unclear how this
will be implemented exactly, so we'll offer flags in which the caller
can specify how the different untracked files ought to be handled.
As the flags allow the function to not die on an error when spawning
a child process, we need to find an appropriate return code for the
case when the child process could not be started. As in that case we
cannot tell if the submodule is ok to remove, we'd want to return 'false'.
As only 0 is understood as false, rename the function to invert the
meaning, i.e. the return code of 0 signals the removal of the submodule
is fine, and other values can be used to return a more precise answer
what went wrong.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of constructing the NULL terminated array ourselves, we
should make use of the argv_array infrastructure.
While at it, adapt the error messages to reflect the actual invocation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
teach submodules to load a '.gitmodules' file from a commit sha1. This
enables the population of the submodule_cache to be based on the state
of the '.gitmodules' file from a particular commit.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the `is_submodule_initialized()` helper function to submodules.c.
`is_submodule_initialized()` performs a check to determine if the
submodule at the given path has been initialized.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the `is_submodule_populated()` helper function to submodules.c.
`is_submodule_populated()` performes a check to see if a submodule has
been checkout out (and has a valid .git directory/file) at the given path.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --dry-run --recurse-submodule=on-demand" wasn't
"--dry-run" in the submodules.
* bw/push-dry-run:
push: fix --dry-run to not push submodules
push: --dry-run updates submodules when --recurse-submodules=on-demand
The code in "git push" to compute if any commit being pushed in the
superproject binds a commit in a submodule that hasn't been pushed
out was overly inefficient, making it unusable even for a small
project that does not have any submodule but have a reasonable
number of refs.
* hv/submodule-not-yet-pushed-fix:
submodule_needs_pushing(): explain the behaviour when we cannot answer
batch check whether submodule needs pushing into one call
serialize collection of refs that contain submodule changes
serialize collection of changed submodules
Migrate callers of real_path() who duplicate the retern value to use
real_pathdup or strbuf_realpath.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule has its git dir inside the working dir, the submodule
support for checkout that we plan to add in a later patch will fail.
Add functionality to migrate the git directory to be absorbed
into the superprojects git directory.
The newly added code in this patch is structured such that other areas of
Git can also make use of it. The code in the submodule--helper is a mere
wrapper and option parser for the function
`absorb_git_dir_into_superproject`, that takes care of embedding the
submodules git directory into the superprojects git dir. That function
makes use of the more abstract function for this use case
`relocate_gitdir`, which can be used by e.g. the worktree code eventually
to move around a git directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That function was primarily used by submodule code, but the function
itself is not inherently about submodules. In the next patch we'll
introduce relocate_git_dir, which can be used by worktrees as well,
so find a neutral middle ground in dir.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current caller of connect_work_tree_and_git_dir passes
an absolute path for the `git_dir` parameter. In the future patch
we will also pass in relative path for `git_dir`. Extend the functionality
of connect_work_tree_and_git_dir to take relative paths for parameters.
We could work around this in the future patch by computing the absolute
path for the git_dir in the calling site, however accepting relative
paths for either parameter makes the API for this function much harder
to misuse.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach push to respect the --dry-run option when configured to
recursively push submodules 'on-demand'. This is done by passing the
--dry-run flag to the child process which performs a push for a
submodules when performing a dry-run.
In order to preserve good user experience, the additional check for
unpushed submodules is skipped during a dry-run when
--recurse-submodules=on-demand. The check is skipped because the submodule
pushes were performed as dry-runs and this check would always fail as the
submodules would still need to be pushed.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we do not have commits that are involved in the update of the
superproject in our copy of submodule, we cannot tell if the remote
end needs to acquire these commits to be able to check out the
superproject tree. Explain why we answer "no there is no need/point
in pushing from our submodule repository" in this case.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run a command for each sha1 change in a submodule. This is
unnecessary since we can simply batch all sha1's we want to check into
one command. Lets do it so we can speedup the check when many submodule
changes are in need of checking.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are iterating over each pushed ref and want to check whether it
contains changes to submodules. Instead of immediately checking each ref
lets first collect them and then do the check for all of them in one
revision walk.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To check whether a submodule needs to be pushed we need to collect all
changed submodules. Lets collect them first and then execute the
possibly expensive test whether certain revisions are already pushed
only once per submodule.
There is further potential for optimization since we can assemble one
command and only issued that instead of one call for each remote ref in
the submodule.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepaths involved in interacting alternate object store have
been cleaned up.
* jk/alt-odb-cleanup:
alternates: use fspathcmp to detect duplicates
sha1_file: always allow relative paths to alternates
count-objects: report alternates via verbose mode
fill_sha1_file: write into a strbuf
alternates: store scratch buffer as strbuf
fill_sha1_file: write "boring" characters
alternates: use a separate scratch space
alternates: encapsulate alt->base munging
alternates: provide helper for allocating alternate
alternates: provide helper for adding to alternates list
link_alt_odb_entry: refactor string handling
link_alt_odb_entry: handle normalize_path errors
t5613: clarify "too deep" recursion tests
t5613: do not chdir in main process
t5613: whitespace/style cleanups
t5613: use test_must_fail
t5613: drop test_valid_repo function
t5613: drop reachable_via function
The submodule code wants to temporarily add an alternate
object store to our in-memory alt_odb list, but does it
manually. Let's provide a helper so it can reuse the code in
link_alt_odb_entry().
While we're adding our new add_to_alternates_memory(), let's
document add_to_alternates_file(), as the two are related.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter in most cases and a bit more efficient.
The changes here are not easily handled by a semantic patch because
they involve removing temporary variables and deconstructing format
strings for strbuf_addf().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up with help from coccinelle tool continues.
* rs/cocci:
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter and a bit more efficient.
1eb47f167d already converted six cases,
this patch covers three more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This is shorter and makes the intent clearer.
bc57b9c0cc already converted three cases,
this patch covers two more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callbacks for iterating a sha1_array must have a void
return. This is unlike our usual for_each semantics, where
a callback may interrupt iteration and have its value
propagated. Let's switch it to the usual form, which will
enable its use in more places (e.g., where we are replacing
an existing iteration with a different data structure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having a submodule whose ".git" repository is somehow corrupt
caused a few commands that recurse into submodules loop forever.
* jc/submodule-anchor-git-dir:
submodule: avoid auto-discovery in prepare_submodule_repo_env()
The function is used to set up the environment variable used in a
subprocess we spawn in a submodule directory. The callers set up a
child_process structure, find the working tree path of one submodule
and set .dir field to it, and then use start_command() API to spawn
the subprocess like "status", "fetch", etc.
When this happens, we expect that the ".git" (either a directory or
a gitfile that points at the real location) in the current working
directory of the subprocess MUST be the repository for the submodule.
If this ".git" thing is a corrupt repository, however, because
prepare_submodule_repo_env() unsets GIT_DIR and GIT_WORK_TREE, the
subprocess will see ".git", thinks it is not a repository, and
attempt to find one by going up, likely to end up in finding the
repository of the superproject. In some codepaths, this will cause
a command run with the "--recurse-submodules" option to recurse
forever.
By exporting GIT_DIR=.git, disable the auto-discovery logic in the
subprocess, which would instead stop it and report an error.
The test illustrates existing problems in a few callsites of this
function. Without this fix, "git fetch --recurse-submodules", "git
status" and "git diff" keep recursing forever.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-diff and friends a new format for displaying the difference
of a submodule. The new format is an inline diff of the contents of the
submodule between the commit range of the update. This allows the user
to see the actual code change caused by a submodule update.
Add tests for the new format and option.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch is going to add a new submodule diff format which
displays an inline diff of the submodule changes. To make this easier,
and to ensure that both submodule diff formats use the same initial
header, factor out show_submodule_header() function which will print the
current submodule header line, and then leave the show_submodule_summary
function to lookup and print the submodule log format.
This does create one format change in that "(revision walker failed)"
will now be displayed on its own line rather than as part of the message
because we no longer perform this step directly in the header display
flow. However, this is a rare case as most causes of the failure will be
due to a missing commit which we already check for and avoid previously.
flow. However, this is a rare case and shouldn't impact much.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're going to be changing this function in a future patch, lets
go ahead and convert this to use object_id now.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, do_submodule_path will attempt locating the .git directory by
using read_gitfile on <path>/.git. If this fails it just assumes the
<path>/.git is actually a git directory.
This is good because it allows for handling submodules which were cloned
in a regular manner first before being added to the superproject.
Unfortunately this fails if the <path> is not actually checked out any
longer, such as by removing the directory.
Fix this by checking if the directory we found is actually a gitdir. In
the case it is not, attempt to lookup the submodule configuration and
find the name of where it is stored in the .git/modules/ directory of
the superproject.
If we can't locate the submodule configuration, this might occur because
for example a submodule gitlink was added but the corresponding
.gitmodules file was not properly updated. A die() here would not be
pleasant to the users of submodule diff formats, so instead, modify
do_submodule_path() to return an error code:
- git_pathdup_submodule() returns NULL when we fail to find a path.
- strbuf_git_path_submodule() propagates the error code to the caller.
Modify the callers of these functions to check the error code and fail
properly. This ensures we don't attempt to use a bad path that doesn't
match the corresponding submodule.
Because this change fixes add_submodule_odb() to work even if the
submodule is not checked out, update the wording of the submodule log
diff format to correctly display that the submodule is "not initialized"
instead of "not checked out"
Add tests to ensure this change works as expected.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct diff_filespec's sha1 member to use a struct object_id
called "oid" instead. The following Coccinelle semantic patch was used
to implement this, followed by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1
+ o.oid.hash
@@
struct diff_filespec *p;
@@
- p->sha1
+ p->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two types of string_lists: those that own the
string memory, and those that don't. You can tell the
difference by the strdup_strings flag, and one should use
either STRING_LIST_INIT_DUP, or STRING_LIST_INIT_NODUP as an
initializer.
Historically, the normal all-zeros initialization has
corresponded to the NODUP case. Many sites use no
initializer at all, and that works as a shorthand for that
case. But for a reader of the code, it can be hard to
remember which is which. Let's be more explicit and actually
have each site declare which type it means to use.
This is a fairly mechanical conversion; I assumed each site
was correct as-is, and just switched them all to NODUP.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier addition of "sanitize_submodule_env" with 14111fc4 (git:
submodule honor -c credential.* from command line, 2016-02-29)
turned out to be a convoluted no-op; implement what it wanted to do
correctly, and stop filtering settings given via "git -c var=val".
* jk/submodule-c-credential:
submodule: stop sanitizing config options
submodule: use prepare_submodule_repo_env consistently
submodule--helper: move config-sanitizing to submodule.c
submodule: export sanitized GIT_CONFIG_PARAMETERS
t5550: break submodule config test into multiple sub-tests
t5550: fix typo in $HTTPD_URL
The point of having a whitelist of command-line config
options to pass to submodules was two-fold:
1. It prevented obvious nonsense like using core.worktree
for multiple repos.
2. It could prevent surprise when the user did not mean
for the options to leak to the submodules (e.g.,
http.sslverify=false).
For case 1, the answer is mostly "if it hurts, don't do
that". For case 2, we can note that any such example has a
matching inverted surprise (e.g., a user who meant
http.sslverify=true to apply everywhere, but it didn't).
So this whitelist is probably not giving us any benefit, and
is already creating a hassle as people propose things to put
on it. Let's just drop it entirely.
Note that we still need to keep a special code path for
"prepare the submodule environment", because we still have
to take care to pass through $GIT_CONFIG_PARAMETERS (and
block the rest of the repo-specific environment variables).
We can do this easily from within the submodule shell
script, which lets us drop the submodule--helper option
entirely (and it's OK to do so because as a "--" program, it
is entirely a private implementation detail).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 14111fc (git: submodule honor -c credential.* from
command line, 2016-02-29), it was sufficient for code which
spawned a process in a submodule to just set the child
process's "env" field to "local_repo_env" to clear the
environment of any repo-specific variables.
That commit introduced a more complicated procedure, in
which we clear most variables but allow through sanitized
config. For C code, we used that procedure only for cloning,
but not for any of the programs spawned by submodule.c. As a
result, things like "git fetch --recurse-submodules" behave
differently than "git clone --recursive"; the former will
not pass through the sanitized config.
We can fix this by using prepare_submodule_repo_env()
everywhere in submodule.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions should be used by any code which spawns a
submodule process, which may happen in submodule.c (e.g.,
for spawning fetch). Let's move them there and make them
public so that submodule--helper can continue to use them.
Since they're now public, let's also provide a basic overview
of their intended use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By having the `submodule init` functionality in C, we can reference it
easier from other parts in the code in later patches. The code is split
up to have one function to initialize one submodule and a calling function
that takes care of the rest, such as argument handling and translating the
arguments to the paths of the submodules.
This is the first submodule subcommand that is fully converted to C
except for the usage string, so this is actually removing a call to
the `submodule--helper list` function, which is supposed to be used in
this transition. Instead we'll make a direct call to `module_list_compute`.
An explanation why we need to edit the prefixes in cmd_update in
git-submodule.sh in this patch:
By having no processing in the shell part, we need to convey the notion
of wt_prefix and prefix to the C parts, which former patches punted on
and did the processing of displaying path in the shell.
`wt_prefix` used to hold the path from the repository root to the current
directory, e.g. wt_prefix would be t/ if the user invoked the
`git submodule` command in ~/repo/t and ~repo is the GIT_DIR.
`prefix` used to hold the relative path from the repository root to the
operation, e.g. if you have recursive submodules, the shell script would
modify the `prefix` in each recursive step by adding the submodule path.
We will pass `wt_prefix` into the C helper via `git -C <dir>` as that
will setup git in the directory the user actually called git-submodule.sh
from. The `prefix` will be passed in via the `--prefix` option.
Having `prefix` and `wt_prefix` relative to the GIT_DIR of the
calling superproject is unfortunate with this patch as the C code doesn't
know about a possible recursion from a superproject via `submodule update
--init --recursive`.
To fix this, we change the meaning of `wt_prefix` to point to the current
project instead of the superproject and `prefix` to include any relative
paths issues in the superproject. That way `prefix` will become the leading
part for displaying paths and `wt_prefix` will be empty in recursive
calls for now.
The new notion of `wt_prefix` and `prefix` still allows us to reconstruct
the calling directory in the superproject by just traveling reverse of
`prefix`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
Any further comments? Otherwise will merge to 'next'.
* sb/submodule-path-misc-bugs: (600 commits)
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
Git 2.8
Documentation: fix git-p4 AsciiDoc formatting
mingw: skip some tests in t9115 due to file name issues
t1300: fix the new --show-origin tests on Windows
t1300-repo-config: make it resilient to being run via 'sh -x'
config --show-origin: report paths with forward slashes
submodule: fix regression for deinit without submodules
l10n: pt_PT: Update and add new translations
l10n: ca.po: update translation
Git 2.8-rc4
Documentation: fix broken linkgit to git-config
Documentation: use ASCII quotation marks in git-p4
Revert "config.mak.uname: use clang for Mac OS X 10.6"
git-compat-util: st_add4: work around gcc 4.2.x compiler crash
...
Simplify the two callback functions that are triggered when the
child process terminates to avoid misuse of the child-process
structure that has already been cleaned up.
* sb/submodule-parallel-fetch:
run-command: do not pass child process data into callbacks
This allows to configure fetching and updating in parallel
without having the command line option.
This moved the responsibility to determine how many parallel processes
to start from builtin/fetch to submodule.c as we need a way to communicate
"The user did not specify the number of parallel processes in the command
line options" in the builtin fetch. The submodule code takes care of
the precedence (CLI > config > default).
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently submodule.<name>.update is only handled by git-submodule.sh.
C code will start to need to make use of that value as more of the
functionality of git-submodule.sh moves into library code in C.
Add the update field to 'struct submodule' and populate it so it can
be read as sm->update or from sm->update_command.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected way to pass data into the callback is to pass them via
the customizable callback pointer. The error reporting in
default_{start_failure, task_finished} is not user friendly enough, that
we want to encourage using the child data for such purposes.
Furthermore the struct child data is cleaned by the run-command API,
before we access them in the callbacks, leading to use-after-free
situations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename git_config_set_or_die functions to git_config_set, leading
to the new default behavior of dying whenever a configuration
error occurs.
By now all callers that shall die on error have been transitioned
to the _or_die variants, thus making this patch a simple rename
of the functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The desired default behavior for `git_config_set` is to die
whenever an error occurs. Dying is the default for a lot of
internal functions when failures occur and is in this case the
right thing to do for most callers as otherwise we might run into
inconsistent repositories without noticing.
As some code may rely on the actual return values for
`git_config_set` we still require the ability to invoke these
functions without aborting. Rename the existing `git_config_set`
functions to `git_config_set_gently` to keep them available for
those callers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to connect a submodule with its corresponding
repository in '.git/modules' we try to set the core.worktree
setting in the submodule, which may fail due to an error
encountered in `git_config_set_in_file`.
The function is used in the git-mv command when trying to move a
submodule to another location. We already die when renaming a
file fails but do not pay attention to the case where updating
the connection between submodule and its repository fails. As
this leaves the repository in an inconsistent state, as well,
abort the program by dying early and presenting the failure to
the user.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we enable parallel processing of submodules, this
only adds the possibility for it. So this change should not change
any user facing behavior.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Pushing submodule <foo>" progress output correctly goes to
stderr, but "Fetching submodule <foo>" is going to stdout by
mistake. Fix it to write to stderr.
Noticed while trying to implement a parallel submodule fetch. When
this particular output line went to a different file descriptor, it
was buffered separately, resulting in wrongly interleaved output if
we copied it to the terminal naively.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
We peek objects from submodule's object store by linking it to the
list of alternate object databases, but the code to do so forgot to
correctly initialize the list.
* jk/initialization-fix-to-add-submodule-odb:
add_submodule_odb: initialize alt_odb list earlier
The add_submodule_odb function tries to add a submodule's
object store as an "alternate". It needs the existing list
to be initialized (from the objects/info/alternates file)
for two reasons:
1. We look for duplicates with the existing alternate
stores, but obviously this doesn't work if we haven't
loaded any yet.
2. We link our new entry into the list by prepending it to
alt_odb_list. But we do _not_ modify alt_odb_tail.
This variable starts as NULL, and is a signal to the
alt_odb code that the list has not yet been
initialized.
We then call read_info_alternates on the submodule (to
recursively load its alternates), which will try to
append to that tail, assuming it has been initialized.
This causes us to segfault if it is NULL.
This rarely comes up in practice, because we will have
initialized the alt_odb any time we do an object lookup. So
you can trigger this only when:
- you try to access a submodule (e.g., a diff with
diff.submodule=log)
- the access happens before any other object has been
accessed (e.g., because the diff is between the working
tree and the index)
- the submodule contains an alternates file (so we try to
add an entry to the NULL alt_odb_tail)
To fix this, we just need to call prepare_alt_odb at the
start of the function (and if we have already initialized,
it is a noop).
Note that we can remove the prepare_alt_odb call from the
end. It is guaranteed to be a noop, since we will have
called it earlier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
When we are allocating a struct with a FLEX_ARRAY member, we
generally compute the size of the array and then sprintf or
strcpy into it. Normally we could improve a dynamic allocation
like this by using xstrfmt, but it doesn't work here; we
have to account for the size of the rest of the struct.
But we can improve things a bit by storing the length that
we use for the allocation, and then feeding it to xsnprintf
or memcpy, which makes it more obvious that we are not
writing more than the allocated number of bytes.
It would be nice if we had some kind of helper for
allocating generic flex arrays, but it doesn't work that
well:
- the call signature is a little bit unwieldy:
d = flex_struct(sizeof(*d), offsetof(d, path), fmt, ...);
You need offsetof here instead of just writing to the
end of the base size, because we don't know how the
struct is packed (partially this is because FLEX_ARRAY
might not be zero, though we can account for that; but
the size of the struct may actually be rounded up for
alignment, and we can't know that).
- some sites do clever things, like over-allocating because
they know they will write larger things into the buffer
later (e.g., struct packed_git here).
So we're better off to just write out each allocation (or
add type-specific helpers, though many of these are one-off
allocations anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions which directly operate submodule's object database do not
handle the case when the submodule is linked worktree (which are
introduced in c7b3a3d2fe). Instead of fixing the path calculation use
already existing strbuf_git_path_submodule() function without changing
overall behaviour. Then it will be possible to modify only that function
whenever we need to change real location of submodule's repository
content.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent reimplementation of "git am" changed the format of state
files kept in $GIT_DIR/rebase-apply/ without meaning to do so,
primarily because write_file() API was cumbersome to use and it was
easy to mistakenly make text files with incomplete lines. Update
write_file() interface to make it harder to misuse.
* jc/am-state-fix:
write_file(): drop caller-supplied LF from calls to create a one-liner file
write_file_v(): do not leave incomplete line at the end
write_file(): drop "fatal" parameter
builtin/am: make sure state files are text
builtin/am: introduce write_state_*() helper functions
The gitmodules API accessed from the C code learned to cache stuff
lazily.
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
All of the callsites covered by this change call write_file() or
write_file_gently() to create a one-liner file. Drop the caller
supplied LF and let these callees to append it as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers except three passed 1 for the "fatal" parameter to ask
this function to die upon error, but to a casual reader of the code,
it was not all obvious what that 1 meant. Instead, split the
function into two based on a common write_file_v() that takes the
flag, introduce write_file_gently() as a new way to attempt creating
a file without dying on error, and make three callers to call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should not die when reading the submodule config cache since the
user might not be able to get out of that situation when the
configuration is part of the history.
We should handle this condition later when the value is about to be
used.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove the extracted functions and directly parse into and read out
of the cache. This allows us to have one unified way of accessing
submodule configuration values specific to single submodules. Regardless
whether we need to access a configuration from history or from the
worktree.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards using the new configuration API. We just
extract these functions to make replacing the actual code easier.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a superproject some commands need to interact with submodules. They
need to query values from the .gitmodules file either from the worktree
of from certain revisions. At the moment this is quite hard since a
caller would need to read the .gitmodules file from the history and then
parse the values. We want to provide an API for this so we have one
place to get values from .gitmodules from any revision (including the
worktree).
The API is realized as a cache which allows us to lazily read
.gitmodules configurations by commit into a runtime cache which can then
be used to easily lookup values from it. Currently only the values for
path or name are stored but it can be extended for any value needed.
It is expected that .gitmodules files do not change often between
commits. Thats why we lookup the .gitmodules sha1 from a commit and then
either lookup an already parsed configuration or parse and cache an
unknown one for each sha1. The cache is lazily build on demand for each
requested commit.
This cache can be used for all purposes which need knowledge about
submodule configurations. Example use cases are:
* Recursive submodule checkout needs to lookup a submodule name from
its path when a submodule first appears. This needs be done before
this configuration exists in the worktree.
* The implementation of submodule support for 'git archive' needs to
lookup the submodule name to generate the archive when given a
revision that is not checked out.
* 'git fetch' when given the --recurse-submodules=on-demand option (or
configuration) needs to lookup submodule names by path from the
database rather than reading from the worktree. For new submodule it
needs to lookup the name from its path to allow cloning new
submodules into the .git folder so they can be checked out without
any network interaction when the user does a checkout of that
revision.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call file_exists() instead of open-coding it. That's shorter, simpler
and the intent becomes clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
In is_submodule_commit_present, we call run_command followed
by a pipe read, which is prone to deadlock. It is unlikely
to happen in this case, as rev-list should never produce
more than a single line of output, but it does not hurt to
avoid an anti-pattern (and using the helper simplifies the
setup and cleanup).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_merge_bases*() API was easy to misuse by careless
copy&paste coders, leaving object flags tainted in the commits that
needed to be traversed.
* jc/merge-bases:
get_merge_bases(): always clean-up object flags
bisect: clean flags after checking merge bases
This fixes common problems in these code about error handling,
forgetting to close the file handle after fprintf() fails, or not
printing out the error string..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callers of get_merge_bases() can choose to leave object flags
used during the merge-base traversal by passing cleanup=0 as a
parameter, but in practice a very few callers can afford to do so
(namely, "git merge-base"), as they need to compute merge base in
preparation for other processing of their own and they need to see
the object without contaminate flags.
Change the function signature of get_merge_bases_many() and
get_merge_bases() to drop the cleanup parameter, so that the
majority of the callers do not have to say ", 1" at the end.
Give a new get_merge_bases_many_dirty() API to support only a few
callers that know they do not need to spend cycles cleaning up the
object flags.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using memset and then manually setting values of the string-list
members is not future proof as the internal representation of
string-list may change any time.
Use `string_list_init()` or STRING_LIST_INIT_* macros instead of
memset.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the ARRAY_SIZE macro to get the number
of elements in an array.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improvements to our hash table to get it to meet the needs of the
msysgit fscache project, with some nice performance improvements.
* kb/fast-hashmap:
name-hash: retire unused index_name_exists()
hashmap.h: use 'unsigned int' for hash-codes everywhere
test-hashmap.c: drop unnecessary #includes
.gitignore: test-hashmap is a generated file
read-cache.c: fix memory leaks caused by removed cache entries
builtin/update-index.c: cleanup update_one
fix 'git update-index --verbose --again' output
remove old hash.[ch] implementation
name-hash.c: remove cache entries instead of marking them CE_UNHASHED
name-hash.c: use new hash map implementation for cache entries
name-hash.c: remove unreferenced directory entries
name-hash.c: use new hash map implementation for directories
diffcore-rename.c: use new hash map implementation
diffcore-rename.c: simplify finding exact renames
diffcore-rename.c: move code around to prepare for the next patch
buitin/describe.c: use new hash map implementation
add a hashtable implementation that supports O(1) removal
submodule: don't access the .gitmodules cache entry after removing it
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5fee995244 introduced the stage_updated_gitmodules() function to
add submodule configuration updates to the index. It assumed that even
after calling remove_cache_entry_at() the same cache entry would still be
valid. This was true in the old days, as cache entries could never be
freed, but that is not so sure in the present as there is ongoing work to
free removed cache entries, which makes this code segfault.
Fix that by calling add_file_to_cache() instead of open coding it. Also
remove the "could not find .gitmodules in index" warning, as that won't
happen in regular use cases (and by then just silently adding it to the
index we do the right thing).
Thanks-to: Karsten Blees <karsten.blees@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
Git fails due to a segmentation fault if a submodule path is empty.
Here is an example .gitmodules that will cause a segmentation fault:
[submodule "foo-module"]
path
url = http://host/repo.git
$ git status
Segmentation fault (core dumped)
This is because the parsing of "submodule.*.path" is not prepared to
see a value-less "true" and assumes that the value is always
non-NULL (parsing of "ignore" has the same problem).
Fix it by checking the NULL-ness of value and complain with
config_error_nonbool().
Signed-off-by: Jharrod LaFon <jlafon@eyesopen.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule removes the submodule's work tree
from that of the superproject and the gitlink from the index. But the
submodule's section in .gitmodules is left untouched, which is a leftover
of the now removed submodule and might irritate users (as opposed to the
setting in .git/config, this must stay as a reminder that the user showed
interest in this submodule so it will be repopulated later when an older
commit is checked out).
Let "git rm" help the user by not only removing the submodule from the
work tree but by also removing the "submodule.<submodule name>" section
from the .gitmodules file and stage both. This doesn't happen when the
"--cached" option is used, as it would modify the work tree. This also
silently does nothing when no .gitmodules file is found and only issues a
warning when it doesn't have a section for this submodule. This is because
the user might just use plain gitlinks without the .gitmodules file or has
already removed the section by hand before issuing the "git rm" command
(in which case the warning reminds him that rm would have done that for
him). Only when .gitmodules is found and contains merge conflicts the rm
command will fail and tell the user to resolve the conflict before trying
again.
Also extend the man page to inform the user about this new feature. While
at it promote the submodule sub-section to a chapter as it made not much
sense under "REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM".
In t7610 three uses of "git rm submod" had to be replaced with "git rm
--cached submod" because that test expects .gitmodules and the work tree
to stay untouched. Also in t7400 the tests for the remaining settings in
the .gitmodules file had to be changed to assert that these settings are
missing.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git mv" on a submodule moves the submodule's work tree in
that of the superproject. But the submodule's path setting in .gitmodules
is left untouched, which is now inconsistent with the work tree and makes
git commands that rely on the proper path -> name mapping (like status and
diff) behave strangely.
Let "git mv" help here by not only moving the submodule's work tree but
also updating the "submodule.<submodule name>.path" setting from the
.gitmodules file and stage both. This doesn't happen when no .gitmodules
file is found and only issues a warning when it doesn't have a section for
this submodule. This is because the user might just use plain gitlinks
without the .gitmodules file or has already updated the path setting by
hand before issuing the "git mv" command (in which case the warning
reminds him that mv would have done that for him). Only when .gitmodules
is found and contains merge conflicts the mv command will fail and tell
the user to resolve the conflict before trying again.
Also extend the man page to inform the user about this new feature.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the new is_staging_gitmodules_ok() and stage_updated_gitmodules()
functions to submodule.c. The first makes it possible for call sites to
see if the .gitmodules file did contain any unstaged modifications they
would accidentally stage in addition to those they intend to stage
themselves. The second function stages all modifications to the
.gitmodules file, both will be used by subsequent patches for the mv
and rm commands.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a submodule which uses a gitfile to point to the git directory
stored in .git/modules/<name> of the superproject two changes must be made
to make the submodule work: the .git file and the core.worktree setting
must be adjusted to point from work tree to git directory and back.
Achieve that by remembering which submodule uses a gitfile by storing the
result of read_gitfile() of each submodule. If that is not NULL the new
function connect_work_tree_and_git_dir() is called after renaming the
submodule's work tree which updates the two settings to the new values.
Extend the man page to inform the user about that feature (and while at it
change the description to not talk about a script anymore, as mv is a
builtin for quite some time now).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --format=" did not honor i18n.logoutputencoding configuration
and this attempts to fix it.
* as/log-output-encoding-in-user-format:
t4205 (log-pretty-formats): avoid using `sed`
t6006 (rev-list-format): add tests for "%b" and "%s" for the case i18n.commitEncoding is not set
t4205, t6006, t7102: make functions better readable
t4205 (log-pretty-formats): revert back single quotes
t4041, t4205, t6006, t7102: use iso8859-1 rather than iso-8859-1
t4205: replace .\+ with ..* in sed commands
pretty: --format output should honor logOutputEncoding
pretty: Add failing tests: --format output should honor logOutputEncoding
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
t7102 (reset): don't hardcode SHA-1 in expected outputs
t6006 (rev-list-format): don't hardcode SHA-1 in expected outputs
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define memory ownership and lifetime rules for what for-each-ref
feeds to its callbacks (in short, "you do not own it, so make a
copy if you want to keep it").
* mh/reflife: (25 commits)
refs: document the lifetime of the args passed to each_ref_fn
register_ref(): make a copy of the bad reference SHA-1
exclude_existing(): set existing_refs.strdup_strings
string_list_add_refs_by_glob(): add a comment about memory management
string_list_add_one_ref(): rename first parameter to "refname"
show_head_ref(): rename first parameter to "refname"
show_head_ref(): do not shadow name of argument
add_existing(): do not retain a reference to sha1
do_fetch(): clean up existing_refs before exiting
do_fetch(): reduce scope of peer_item
object_array_entry: fix memory handling of the name field
find_first_merges(): remove unnecessary code
find_first_merges(): initialize merges variable using initializer
fsck: don't put a void*-shaped peg in a char*-shaped hole
object_array_remove_duplicates(): rewrite to reduce copying
revision: use object_array_filter() in implementation of gc_boundary()
object_array: add function object_array_filter()
revision: split some overly-long lines
cmd_diff(): make it obvious which cases are exclusive of each other
cmd_diff(): rename local variable "list" -> "entry"
...
read_cache already performs the same check and returns immediately if
the cache has already been loaded.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No names are ever set for the object_array_entries in merges, so there
is no need to pretend to copy them to the result array.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git log -p --submodule=log", the submodule log is not
indented by the graph output, although all other lines are. Fix this by
prepending the current line prefix to each line of the submodule log.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two uses of the "left" and "right" commit variables that
make it hard to be sure what values they have (both for the reader,
and for gcc, which wrongly complains that they might be used
uninitialized).
The function starts with a cascading if statement, checking that the
input sha1s exist, and finally working up to preparing a revision
walk. We only prepare the walk if the cascading conditional did not
find any problems, which we check by seeing whether it set the
"message" variable or not. It's simpler and more obvious to just add
a condition to the end of the cascade.
Later, we check the same "message" variable when deciding whether to
clear commit marks on the left/right commits; if it is set, we
presumably never started the walk. This is wrong, though; we might
have started the walk and munged commit flags, only to encounter an
error afterwards. We should always clear the flags on left/right if
they exist, whether the walk was successful or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We keep a strbuf for the name of the submodule, even though
we only ever add one string to it. Let's just use xmemdupz
instead, which is slightly more efficient and makes it
easier to follow what is going on.
Unfortunately, we still end up having to deal with some
memory ownership issues in some code branches, as we have to
allocate the string in order to do a string list lookup, and
then only sometimes want to hand ownership of that string
over to the string_list. Still, making that explicit in the
code (as opposed to sometimes detaching the strbuf, and then
always releasing it) makes it a little more obvious what is
going on.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the code a lot simpler to read by dropping a
whole bunch of constant offsets.
As a bonus, it means we also feed the whole config variable
name to our error functions:
[before]
$ git -c submodule.foo.fetchrecursesubmodules=bogus checkout
fatal: bad foo.fetchrecursesubmodules argument: bogus
[after]
$ git -c submodule.foo.fetchrecursesubmodules=bogus checkout
fatal: bad submodule.foo.fetchrecursesubmodules argument: bogus
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, 'git diff --submodule' displays output with a bold diff
header for non-submodules. So this part is in bold:
diff --git a/file1 b/file1
index 30b2f6c..2638038 100644
--- a/file1
+++ b/file1
For submodules, the header looks like this:
Submodule submodule1 012b072..248d0fd:
Unfortunately, it's easy to miss in the output because it's not bold.
Change this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rm submodule" cannot blindly remove a submodule directory as
its working tree may have local changes, and worse yet, it may even
have its repository embedded in it. Teach it some special cases
where it is safe to remove a submodule, specifically, when there is
no local changes in the submodule working tree, and its repository
is not embedded in its working tree but is elsewhere and uses the
gitfile mechanism to point at it.
* jl/submodule-rm:
submodule: teach rm to remove submodules unless they contain a git directory
Currently using "git rm" on a submodule - populated or not - fails with
this error:
fatal: git rm: '<submodule path>': Is a directory
This made sense in the past as there was no way to remove a submodule
without possibly removing unpushed parts of the submodule's history
contained in its .git directory too, so erroring out here protected the
user from possible loss of data.
But submodules cloned with a recent git version do not contain the .git
directory anymore, they use a gitfile to point to their git directory
which is safely stored inside the superproject's .git directory. The work
tree of these submodules can safely be removed without losing history, so
let's teach git to do so.
Using rm on an unpopulated submodule now removes the empty directory from
the work tree and the gitlink from the index. If the submodule's directory
is missing from the work tree, it will still be removed from the index.
Using rm on a populated submodule using a gitfile will apply the usual
checks for work tree modification adapted to submodules (unless forced).
For a submodule that means that the HEAD is the same as recorded in the
index, no tracked files are modified and no untracked files that aren't
ignored are present in the submodules work tree (ignored files are deemed
expendable and won't stop a submodule's work tree from being removed).
That logic has to be applied in all nested submodules too.
Using rm on a submodule which has its .git directory inside the work trees
top level directory will just error out like it did before to protect the
repository, even when forced. In the future git could either provide a
message informing the user to convert the submodule to use a gitfile or
even attempt to do the conversion itself, but that is not part of this
change.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use argv-array API in "git fetch" implementation.
* jk/argv-array:
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
Optimise the "merge-base" computation a bit, and also update its
users that do not need the full merge-base information to call a
cheaper subset.
* jc/merge-bases:
reduce_heads(): reimplement on top of remove_redundant()
merge-base: "--is-ancestor A B"
get_merge_bases_many(): walk from many tips in parallel
in_merge_bases(): use paint_down_to_common()
merge_bases_many(): split out the logic to paint history
in_merge_bases(): omit unnecessary redundant common ancestor reduction
http-push: use in_merge_bases() for fast-forward check
receive-pack: use in_merge_bases() for fast-forward check
in_merge_bases(): support only one "other" commit
fetch_populated_submodules() allocates the full argv array it uses to
recurse into the submodules from the number of given options plus the six
argv values it is going to add. It then initializes it with those values
which won't change during the iteration and copies the given options into
it. Inside the loop the two argv values different for each submodule get
replaced with those currently valid.
However, this technique is brittle and error-prone (as the comment to
explain the magic number 6 indicates), so let's replace it with an
argv_array. Instead of replacing the argv values, push them to the
argv_array just before the run_command() call (including the option
separating them) and pop them from the argv_array right after that.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In early days of its life, I planned to make it possible to compute
"is a commit contained in all of these other commits?" with this
function, but it turned out that no caller needed it.
Just make it take two commit objects and add a comment to say what
these two functions do.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_setup_done() has historically returned an error code, but lost
the last nonzero return in 943d5b7 (allow diff.renamelimit to be set
regardless of -M/-C, 2006-08-09). The callers were in a pretty
confused state: some actually checked for the return code, and some
did not.
Let it return void, and patch all callers to take this into account.
This conveniently also gets rid of a handful of different(!) error
messages that could never be triggered anyway.
Note that the function can still die().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When peeking into object stores of submodules, the code forgot that they
might borrow objects from alternate object stores on their own.
By Heiko Voigt
* hv/submodule-alt-odb:
teach add_submodule_odb() to look for alternates
Since we allow to link other object databases when loading a submodules
database we should also load possible alternates.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using this option git will search for all submodules that
have changed in the revisions to be send. It will then try to
push the currently checked out branch of each submodule.
This helps when a user has finished working on a change which
involves submodules and just wants to push everything in one go.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to tell the user which submodules have not been pushed.
Additionally this is helpful when we want to automatically try to push
submodules that have not been pushed.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use diff_tree_combined_merge() instead of open-coding it.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Maintaining an array of hashes is easier using sha1_array than
open-coding it. This patch also fixes a leak of the SHA1 array
in diff_tree_combined_merge().
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff and status run "git status --porcelain" inside each populated
submodule to see if it contains changes (unless told not to do so via
config or command line option). When that fails, e.g. due to a corrupt
submodule .git directory, it just prints "git status --porcelain failed"
or "Could not run git status --porcelain" without giving the user a clue
where that happened.
Add '"in submodule %s", path' to these error strings to tell the user
where exactly the problem occurred.
Reported-by: Seth Robertson <in-gitvger@baka.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both of these free() calls are freeing a "const unsigned char (*)[20]"
type while free() expects a "void *". This results in the following
warning under clang 2.9:
builtin/diff.c:185:7: warning: passing 'const unsigned char (*)[20]' to parameter of type 'void *' discards qualifiers
free(parent);
^~~~~~
submodule.c:394:7: warning: passing 'const unsigned char (*)[20]' to parameter of type 'void *' discards qualifiers
free(parents);
^~~~~~~
This free()-ing without a cast was added by Jim Meyering to
builtin/diff.c in v1.7.6-rc3~4 and later by Fredrik Gustafsson in
submodule.c in v1.7.7-rc1~25^2.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule merge search is not useful during virtual merges because
the results cannot be used automatically. Furthermore any suggestions
made by the search may apply to commits different than HEAD:sub and
MERGE_HEAD:sub, thus confusing the user. Skip searching for submodule
merges during a virtual merge such as that between B and C while merging
the heads of:
B---BC
/ \ /
A X
\ / \
C---CB
Run the search only when the recursion level is zero (!o->call_depth).
This fixes known breakage tested in t7405-submodule-merge.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
The submodule code recently grew generic code to build a
dynamic argv array. Many other parts of the code can reuse
this, too, so let's make it generically available.
There are two enhancements not found in the original code:
1. We now handle the NULL-termination invariant properly,
even when no strings have been pushed (before, you
could have an empty, NULL argv). This was not a problem
for the submodule code, which always pushed at least
one argument, but was not sufficiently safe for
generic code.
2. There is a formatted variant of the "push" function.
This is a convenience function which was not needed by
the submodule code, but will make it easier to port
other users to the new code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of git can be slow to fetch repositories with a
large number of refs (or when they already have a large
number of refs). For example, GitHub makes pull-requests
available as refs, which can lead to a large number of
available refs. This slowness goes away when submodule
recursion is turned off:
$ git ls-remote git://github.com/rails/rails.git | wc -l
3034
[this takes ~10 seconds of CPU time to complete]
git fetch --recurse-submodules=no \
git://github.com/rails/rails.git "refs/*:refs/*"
[this still isn't done after 10 _minutes_ of pegging the CPU]
git fetch \
git://github.com/rails/rails.git "refs/*:refs/*"
You can produce a quicker and simpler test case like this:
doit() {
head=`git rev-parse HEAD`
for i in `seq 1 $1`; do
echo $head refs/heads/ref$i
done >.git/packed-refs
echo "==> $1"
rm -rf dest
git init -q --bare dest &&
(cd dest && time git.compile fetch -q .. refs/*:refs/*)
}
rm -rf repo
git init -q repo && cd repo &&
>file && git add file && git commit -q -m one
doit 100
doit 200
doit 400
doit 800
doit 1600
doit 3200
Which yields timings like:
# refs seconds of CPU
100 0.06
200 0.24
400 0.95
800 3.39
1600 13.66
3200 54.09
Notice that although the number of refs doubles in each
trial, the CPU time spent quadruples.
The problem is that the submodule recursion code works
something like:
- for each ref we fetch
- for each commit in git rev-list $new_sha1 --not --all
- add modified submodules to list
- fetch any newly referenced submodules
But that means if we fetch N refs, we start N revision
walks. Worse, because we use "--all", the number of refs we
must process that constitute "--all" keeps growing, too. And
you end up doing O(N^2) ref resolutions.
Instead, this patch structures the code like this:
- for each sha1 we already have
- add $old_sha1 to list $old
- for each ref we fetch
- add $new_sha1 to list $new
- for each commit in git rev-list $new --not $old
- add modified submodules to list
- fetch any newly referenced submodules
This yields timings like:
# refs seconds of CPU
100 0.00
200 0.04
400 0.04
800 0.10
1600 0.21
3200 0.39
Note that the amount of effort doubles as the number of refs
doubles. Similarly, the fetch of rails.git takes about as
much time as it does with --recurse-submodules=no.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes no sense to do the - possibly very expensive - call to "rev-list
<new-ref-sha1> --not --all" in check_for_new_submodule_commits() when
there aren't any submodules configured.
Leave check_for_new_submodule_commits() early when no name <-> path
mappings for submodules are found in the configuration. To make that work
reading the configuration had to be moved further up in cmd_fetch(), as
doing that after the actual fetch of the superproject was too late.
Reported-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>