In 1a812f3a70 (hashcmp(): inline memcmp() by hand to
optimize, 2011-04-28), it was reported that an open-coded
loop outperformed memcmp() for comparing sha1s.
Discussion[1] a few years later in 2013 showed that this
depends on your libc's version of memcmp(). In particular,
glibc 2.13 optimized their memcmp around 2011. Here are
current timings with glibc 2.24 (best-of-five, on
linux.git):
[before this patch, open-coded]
$ time git rev-list --objects --all
real 0m35.357s
user 0m35.016s
sys 0m0.340s
[after this patch, memcmp]
real 0m32.930s
user 0m32.630s
sys 0m0.300s
Now that we've had 6 years for that version of glibc to
make its way onto people's machines, it's worth revisiting
our benchmarks and switching to memcmp().
It may be that there are other non-glibc systems where
memcmp() isn't as well optimized. But since our single data
point in favor of open-coding was on a now-ancient glibc, we
should probably assume the system memcmp is good unless
proven otherwise. We may end up with a SLOW_MEMCMP Makefile
knob, but we can hold off on that until we actually find
such a system in practice.
[1] https://public-inbox.org/git/20130318073229.GA5551@sigill.intra.peff.net/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert grep to use 'struct repository' which enables recursing into
submodules to be handled in-process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a macro to be used when specifying the '.gitmodules' file and
convert any existing hard coded '.gitmodules' file strings to use the
new macro.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We reject hostnames that start with a dash because they may
be confused for command-line options. Let's factor out that
notion into a helper function, as we'll use it in more
places. And while it's simple now, it's not clear if some
systems might need more complex logic to handle all cases.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
Convert the flags for get_oid_with_context and friends to use "OID"
instead of "SHA1" in their names.
This transform was made by running the following one-liner on the
affected files:
perl -pi -e 's/GET_SHA1/GET_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize "what are the object names already taken in an alternate
object database?" query that is used to derive the length of prefix
an object name is uniquely abbreviated to.
* rs/sha1-name-readdir-optim:
sha1_file: guard against invalid loose subdirectory numbers
sha1_file: let for_each_file_in_obj_subdir() handle subdir names
p4205: add perf test script for pretty log formats
sha1_name: cache readdir(3) results in find_short_object_filename()
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new flags field to emit_diff_symbol, that will be used by
context lines for:
* white space rules that are applicable (The first 12 bits)
Take a note in cahe.c as well, when this ws rules are extended we have
to fix the bits in the flags field.
* how the rules are evaluated (actually this double encodes the sign
of the line, but the code is easier to keep this way, bits 13,14,15)
* if the line a blank line at EOF (bit 16)
The check if new lines need to be marked up as extra lines at the end of
file, is now done unconditionally. That should be ok, as
'new_blank_line_at_eof' has a quick early return.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
has_sha1_file_with_flags() implements many mechanisms in common with
sha1_object_info_extended(). Make has_sha1_file_with_flags() a
convenience function for sha1_object_info_extended() instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve sha1_object_info_extended() by supporting additional
flags. This allows has_sha1_file_with_flags() to be modified to use
sha1_object_info_extended() in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
Code clean-up.
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
Loose object subdirectories have hexadecimal names based on the first
byte of the hash of contained objects, thus their numerical
representation can range from 0 (0x00) to 255 (0xff). Change the type
of the corresponding variable in for_each_file_in_obj_subdir() and
associated callback functions to unsigned int and add a range check.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move all path related declarations from cache.h to a new path.h header
file. This makes cache.h smaller and makes it easier to add new path
related functions.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate 'git_dir', 'git_common_dir', 'git_object_dir', 'git_index_file',
'git_graft_file', and 'namespace' to be stored in 'the_repository'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under some circumstances (bogus GIT_DIR value or the discovered gitdir
is '.git') 'setup_git_directory()' won't initialize key repository
state. This leads to inconsistent state after running the setup code.
To account for this inconsistent state, lazy initialization is done once
a caller asks for the repository's gitdir or some other piece of
repository state. This is confusing and can be error prone.
Instead let's tighten the expected outcome of 'setup_git_directory()'
and ensure that it initializes repository state in all cases that would
have been handled by lazy initialization.
This also lets us drop the requirement to have 'have_git_dir()' check if
the environment variable GIT_DIR was set as that will be handled by the
end of the setup code.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
Read each loose object subdirectory at most once when looking for unique
abbreviated hashes. This speeds up commands like "git log --pretty=%h"
considerably, which previously caused one readdir(3) call for each
candidate, even for subdirectories that were visited before.
The new cache is kept until the program ends and never invalidated. The
same is already true for pack indexes. The inherent racy nature of
finding unique short hashes makes it still fit for this purpose -- a
conflicting new object may be added at any time. Tasks with higher
consistency requirements should not use it, though.
The cached object names are stored in an oid_array, which is quite
compact. The bitmap for remembering which subdir was already read is
stored as a char array, with one char per directory -- that's not quite
as compact, but really simple and incurs only an overhead equivalent to
11 hashes after all.
Suggested-by: Jeff King <peff@peff.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_object() and sha1_object_info_extended() both implement mechanisms
such as object replacement, retrying the packed store after failing to
find the object in the packed store then the loose store, and being able
to mark a packed object as bad and then retrying the whole process.
Consolidating these mechanisms would be a great help to maintainability.
Therefore, consolidate them by extending sha1_object_info_extended() to
support the functionality needed, and then modifying read_object() to
use sha1_object_info_extended().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The LOOKUP_REPLACE_OBJECT flag controls whether the
lookup_replace_object() function is invoked by
sha1_object_info_extended(), read_sha1_file_extended(), and
lookup_replace_object_extended(), but it is not immediately clear which
functions accept that flag.
Therefore restrict this flag to only sha1_object_info_extended(),
renaming it appropriately to OBJECT_INFO_LOOKUP_REPLACE and adding some
documentation. Update read_sha1_file_extended() to have a boolean
parameter instead, and delete lookup_replace_object_extended().
parse_sha1_header() also passes this flag to
parse_sha1_header_extended() since commit 46f0344 ("sha1_file: support
reading from a loose object of unknown type", 2015-05-03), but that has
had no effect since that commit. Therefore this patch also removes this
flag from that invocation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The LOOKUP_UNKNOWN_OBJECT flag was introduced in commit 46f0344
("sha1_file: support reading from a loose object of unknown type",
2015-05-03) in order to support a feature in cat-file subsequently
introduced in commit 39e4ae3 ("cat-file: teach cat-file a
'--allow-unknown-type' option", 2015-05-03). Despite its name and
location in cache.h, this flag is used neither in
read_sha1_file_extended() nor in any of the lookup functions, but used
only in sha1_object_info_extended().
Therefore rename this flag to OBJECT_INFO_ALLOW_UNKNOWN_TYPE, taking the
name of the cat-file flag that invokes this feature, and move it closer
to the declaration of sha1_object_info_extended(). Also add
documentation for this flag.
OBJECT_INFO_ALLOW_UNKNOWN_TYPE is defined to 2, not 1, to avoid
conflicting with LOOKUP_REPLACE_OBJECT. Avoidance of this conflict is
necessary because sha1_object_info_extended() supports both flags.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'discover_git_directory' only looks at the gitdir to determine
if a git directory was discovered. This causes a problem in the event
that the gitdir which was discovered was in fact a per-worktree git
directory and not the common git directory. This is because the
repository config, which is checked to verify the repository's format,
is stored in the commondir and not in the per-worktree gitdir. Correct
this behavior by checking the config stored in the commondir.
It will also be of use for callers to have access to the commondir, so
lets also return that upon successfully discovering a git directory.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move all config related declarations from cache.h to a new config.h
header file. This makes cache.h smaller and allows for the opportunity
in a following patch to only include config.h when needed.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
Convert the remaining parts of grep to use struct object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git checkout", "git merge", etc. manipulates the in-core
index, various pieces of information in the index extensions are
discarded from the original state, as it is usually not the case
that they are kept up-to-date and in-sync with the operation on the
main index. The untracked cache extension is copied across these
operations now, which would speed up "git status" (as long as the
cache is properly invalidated).
* dt/unpack-save-untracked-cache-extension:
unpack-trees: preserve index extensions
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
When a sha1 lookup returns the tree path via "struct
object_context", it just copies it into a fixed-size buffer.
This means the result can be truncated, and it means our
"struct object_context" consumes a lot of stack space.
Instead, let's allocate a string on the heap. Because most
callers don't care about this information, we'll avoid doing
it by default (so they don't all have to start calling
free() on the result). There are basically two options for
the caller to signal to us that it's interested:
1. By setting a pointer to storage in the object_context.
2. By passing a flag in another parameter.
Doing (1) would match the way that sha1_object_info_extended()
works. But it would mean that every caller would have to
initialize the object_context, which they don't currently
have to do.
This patch does (2), and adds a new bit to the function's
flags field. All of the callers that look at the "path"
field are updated to pass the new flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An early version of the patch to add object_context used the
name object_resolve_context. This was later shortened to
just object_context, but the "orc" variable name stuck in a
few places. Let's use "oc", which is used elsewhere in the
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git checkout (and other unpack_tree operations) preserve the
untracked cache. This is valuable for two reasons:
1. Often, an unpack_tree operation will not touch large parts of the
working tree, and thus most of the untracked cache will continue to be
valid.
2. Even if the untracked cache were entirely invalidated by such an
operation, the user has signaled their intention to have such a cache,
and we don't want to throw it away.
[jes: backed out the watchman-specific parts]
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
Converting checkout_fast_forward is required to convert
parse_tree_indirect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" that handles a lot of paths has been optimized by
reducing the number of unnecessary checks of paths in the
has_dir_name() function.
* jh/add-index-entry-optim:
read-cache: speed up has_dir_name (part 2)
read-cache: speed up has_dir_name (part 1)
read-cache: speed up add_index_entry during checkout
p0006-read-tree-checkout: perf test to time read-tree
read-cache: add strcmp_offset function
The recently introduced conditional inclusion of configuration did
not work well when early-config mechanism was involved.
* nd/conditional-config-in-early-config:
config: correct file reading order in read_early_config()
config: handle conditional include when $GIT_DIR is not set up
config: prepare to pass more info in git_config_with_options()
The index file has a trailing SHA-1 checksum to detect file
corruption, and historically we checked it every time the index
file is used. Omit the validation during normal use, and instead
verify only in "git fsck".
* jh/verify-index-checksum-only-in-fsck:
read-cache: force_verify_index_checksum
$GIT_DIR may in some cases be normalized with all symlinks resolved
while "gitdir" path expansion in the pattern does not receive the
same treatment, leading to incorrect mismatch. This has been fixed.
* nd/conditional-config-include:
config: resolve symlinks in conditional include's patterns
path.c: and an option to call real_path() in expand_user_path()
Allow the http.postbuffer configuration variable to be set to a
size that can be expressed in size_t, which can be larger than
ulong on some platforms.
* dt/http-postbuffer-can-be-large:
http.postbuffer: allow full range of ssize_t values
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
If setup_git_directory() and friends have not been called,
get_git_dir() (because of includeIf.gitdir:XXX) would lead to
die("BUG: setup_git_env called without repository");
There are two cases when a config file could be read before $GIT_DIR
is located.
The first one is check_repository_format(), where we read just the one
file $GIT_DIR/config to check if we could understand this
repository. This case should be safe. We do not parse include
directives, which can only be triggered from git_config_with_options,
but setup code uses a lower-level function. The concerned variables
should never be hidden away behind includes anyway.
The second one is triggered in check_pager_config() when we're about
to run an external git command. We might be able to find $GIT_DIR in
this case, which is exactly what read_early_config() does (and also is
what check_pager_config() uses). Conditional includes and
get_git_dir() could be triggered by the first
git_config_with_options() call there, before discover_git_directory()
is used as a fallback $GIT_DIR detection.
Detect this special "early reading" case, pass down the $GIT_DIR,
either from previous setup or detected by discover_git_directory(),
and make conditional include use it.
Noticed-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far we can only pass one flag, respect_includes, to thie function. We
need to pass some more (non-flag even), so let's make it accept a struct
instead of an integer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/snprintf-cleanups:
daemon: use an argv_array to exec children
gc: replace local buffer with git_path
transport-helper: replace checked snprintf with xsnprintf
convert unchecked snprintf into xsnprintf
combine-diff: replace malloc/snprintf with xstrfmt
replace unchecked snprintf calls with heap buffers
receive-pack: print --pack-header directly into argv array
name-rev: replace static buffer with strbuf
create_branch: use xstrfmt for reflog message
create_branch: move msg setup closer to point of use
avoid using mksnpath for refs
avoid using fixed PATH_MAX buffers for refs
fetch: use heap buffer to format reflog
tag: use strbuf to format tag header
diff: avoid fixed-size buffer for patch-ids
odb_mkstemp: use git_path_buf
odb_mkstemp: write filename into strbuf
do not check odb_mkstemp return value for errors
Add strcmp_offset() function to also return the offset of the
first change.
Add unit test and helper to verify.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to skip verification of the SHA1-1 checksum at the end of
the index file in verify_hdr() which is called from read_index()
unless the "force_verify_index_checksum" global variable is set.
Teach fsck to force this verification.
The checksum verification is for detecting disk corruption, and for
small projects, the time it takes to compute SHA-1 is not that
significant, but for gigantic repositories this calculation adds
significant time to every command.
These effect can be seen using t/perf/p0002-read-cache.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------------
0002.1: read_cache/discard_cache 1000 times 0.66(0.44+0.20) 0.30(0.27+0.02) -54.5%
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch we need the ability to expand '~' to
real_path($HOME). But we can't do that from outside because '~' is part
of a pattern, not a true path. Add an option to expand_user_path() to do
so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, in order to push some large repos where a server does
not support chunked encoding, the http postbuffer must sometimes
exceed two gigabytes. On a 64-bit system, this is OK: we just malloc
a larger buffer.
This means that we need to use CURLOPT_POSTFIELDSIZE_LARGE to set the
buffer size.
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few commands that recently learned the "--recurse-submodule"
option misbehaved when started from a subdirectory of the
superproject.
* bw/recurse-submodules-relative-fix:
ls-files: fix bug when recursing with relative pathspec
ls-files: fix typo in variable name
grep: fix bug when recursing with relative pathspec
setup: allow for prefix to be passed to git commands
grep: fix help text typo
The odb_mkstemp() function expects the caller to provide a
fixed buffer to write the resulting tempfile name into. But
it creates the template using snprintf without checking the
return value. This means we could silently truncate the
filename.
In practice, it's unlikely that the truncation would end in
the template-pattern that mkstemp needs to open the file. So
we'd probably end up failing either way, unless the path was
specially crafted.
The simplest fix would be to notice the truncation and die.
However, we can observe that most callers immediately
xstrdup() the result anyway. So instead, let's switch to
using a strbuf, which is easier for them (and isn't a big
deal for the other 2 callers, who can just strbuf_release
when they're done with it).
Note that many of the callers used static buffers, but this
was purely to avoid putting a large buffer on the stack. We
never passed the static buffers out of the function, so
there's no complicated memory handling we need to change.
Signed-off-by: Jeff King <peff@peff.net>
The odb_mkstemp function does not return an error; it dies
on failure instead. But many of its callers compare the
resulting descriptor against -1 and die themselves.
Mostly this is just pointless, but it does raise a question
when looking at the callers: if they show the results of the
"template" buffer after a failure, what's in it? The answer
is: it doesn't matter, because it cannot happen.
So let's make that clear by removing the bogus error checks.
In bitmap_writer_finish(), we can drop the error-handling
code entirely. In the other two cases, it's shared with the
open() in another code path; we can just move the
error-check next to that open() call.
And while we're at it, let's flesh out the function's
docstring a bit to make the error behavior clear.
Signed-off-by: Jeff King <peff@peff.net>
The name-hash used for detecting paths that are different only in
cases (which matter on case insensitive filesystems) has been
optimized to take advantage of multi-threading when it makes sense.
* jh/memihash-opt:
name-hash: add test-lazy-init-name-hash to .gitignore
name-hash: add perf test for lazy_init_name_hash
name-hash: add test-lazy-init-name-hash
name-hash: perf improvement for lazy_init_name_hash
hashmap: document memihash_cont, hashmap_disallow_rehash api
hashmap: add disallow_rehash setting
hashmap: allow memihash computation to be continued
name-hash: specify initial size for istate.dir_hash table
Code clean-up.
* jk/pack-name-cleanups:
index-pack: make pointer-alias fallbacks safer
replace snprintf with odb_pack_name()
odb_pack_keep(): stop generating keepfile name
sha1_file.c: make pack-name helper globally accessible
move odb_* declarations out of git-compat-util.h
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
refs: parse_hide_refs_config to use parse_config_key
Code clean-up with minor bugfixes.
* jk/prefix-filename:
bundle: use prefix_filename with bundle path
prefix_filename: simplify windows #ifdef
prefix_filename: return newly allocated string
prefix_filename: drop length parameter
prefix_filename: move docstring to header file
hash-object: fix buffer reuse with --path in a subdirectory
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 20 bytes, use the constant
GIT_MAX_RAWSZ, which is designed to be suitable for allocations, instead
of GIT_SHA1_RAWSZ. This will ease the transition down the line by
distinguishing between places where we need to allocate memory suitable
for the largest hash from those where we need to handle the current
hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will want to transition to a new hash at some point in the
future, and that hash may be larger in size than 160 bits, introduce two
constants that can be used for allocating a sufficient amount of memory.
They can be increased to reflect the largest supported hash size.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default location "~/.git-credential-cache/socket" for the
socket used to communicate with the credential-cache daemon has
been moved to "~/.cache/git/credential/socket".
* dl/credential-cache-socket-in-xdg-cache:
credential-cache: add tests for XDG functionality
credential-cache: use XDG_CACHE_HOME for socket
path.c: add xdg_cache_home
Add t/helper/test-lazy-init-name-hash.c test code
to demonstrate performance times for lazy_init_name_hash()
using the original single-threaded and the new multi-threaded
code paths.
Includes a --dump option to dump the created hashmaps to
stdout. You can use this to run both code paths and
confirm that they generate the same hashmaps.
Includes a --analyze option to analyze performance of both
code paths over a range of index sizes to help you find a
lower bound for the LAZY_THREAD_COST in name-hash.c.
For example, passing "-a 4000" will set "istate.cache_nr"
to 4000 and then try the multi-threaded code -- probably
giving 2 threads with 2000 entries each. It will then
run both the single-threaded (1x4000) and the multi-threaded
(2x2000) and compare the times. It will then repeat the
test with 8000, 12000, and etc. so that you can see the
cross over.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/pack-name-cleanups:
index-pack: make pointer-alias fallbacks safer
replace snprintf with odb_pack_name()
odb_pack_keep(): stop generating keepfile name
sha1_file.c: make pack-name helper globally accessible
move odb_* declarations out of git-compat-util.h
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).
Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).
The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.
I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).
In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a public function, so we should make its
documentation available near the declaration.
While we're at it, we can give a few details about how it
works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The start-up sequence of "git" needs to figure out some configured
settings before it finds and set itself up in the location of the
repository and was quite messy due to its "chicken-and-egg" nature.
The code has been restructured.
* js/early-config:
setup.c: mention unresolved problems
t1309: document cases where we would want early config not to die()
setup_git_directory_gently_1(): avoid die()ing
t1309: test read_early_config()
read_early_config(): really discover .git/
read_early_config(): avoid .git/config hack when unneeded
setup: make read_early_config() reusable
setup: introduce the discover_git_directory() function
setup_git_directory_1(): avoid changing global state
setup: prepare setup_discovered_git_dir() for the root directory
setup_git_directory(): use is_dir_sep() helper
t7006: replace dubious test
Our source code has used the SHA1_HEADER cpp macro after "#include"
in the C code to switch among the SHA-1 implementations. Instead,
list the exact header file names and switch among implementations
using "#ifdef BLK_SHA1/#include "block-sha1/sha1.h"/.../#endif";
this helps some IDE tools.
* bc/sha1-header-selection-with-cpp-macros:
hash.h: move SHA-1 implementation selection into a header file
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
In a future patch child processes which act on submodules need a little
more context about the original command that was invoked. This patch
teaches git to use the prefix stored in `GIT_INTERNAL_TOPLEVEL_PREFIX`
instead of the prefix that was potentally found during the git directory
setup process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The odb_pack_keep() function generates the name of a .keep
file and opens it. This has two problems:
1. It requires a fixed-size buffer to create the filename
and doesn't notice when the result is truncated.
2. Of the two callers, one sometimes wants to open a
filename it already has, which makes things awkward (it
has to do so manually, and skips the leading-directory
creation).
Instead, let's have odb_pack_keep() just open the file.
Generating the name isn't hard, and a future patch will
switch callers over to odb_pack_name() anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We provide sha1_pack_name() and sha1_pack_index_name(), but
the more generic form (which takes its own strbuf and an
arbitrary extension) is only used to implement the other
two. Let's make it available, but clean up a few things:
1. Name it odb_pack_name(), as the original
sha1_get_pack_name() is long but not all that
descriptive.
2. Switch the strbuf argument to the beginning, so that it
matches similar path-building functions like
git_path_buf().
3. Clean up the out-dated docstring and move it to the
public declaration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions were originally conceived as wrapper
functions similar to xmkstemp(). They were later moved by
463db9b10 (wrapper: move odb_* to environment.c,
2010-11-06). The more appropriate place for a declaration is
in cache.h.
While we're at it, let's add some basic docstrings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many developers use functionality in their editors that allows for quick
syntax checks, including warning about questionable constructs. This
functionality allows rapid development with fewer errors. However, such
functionality generally does not allow the specification of
project-specific defines or command-line options.
Since the SHA1_HEADER include is not defined in such a case,
developers see spurious errors when using these tools. Furthermore,
there are known implementations of "cc" whose '#include' is unhappy
with this construct.
Instead of using SHA1_HEADER, create a hash.h header and use #if
and #elif to select the desired header. Have the Makefile pass an
appropriate option to help the header select the right implementation to
use.
[jc: make BLK_SHA1 the fallback default as discussed on list,
e.g. <20170314201424.vccij5z2ortq4a4o@sigill.intra.peff.net>; also
remove SHA1_HEADER and SHA1_HEADER_SQ that are no longer used].
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
The pager configuration needs to be read early, possibly before
discovering any .git/ directory.
Let's not hide this function in pager.c, but make it available to other
callers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We modified the setup_git_directory_gently_1() function earlier to make
it possible to discover the GIT_DIR without changing global state.
However, it is still a bit cumbersome to use if you only need to figure
out the (possibly absolute) path of the .git/ directory. Let's just
provide a convenient wrapper function with an easier signature that
*just* discovers the .git/ directory.
We will use it in a subsequent patch to fix the early config.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have xdg_config_home to format paths relative to
XDG_CONFIG_HOME. Let's provide a similar function xdg_cache_home to do
the same for paths relative to XDG_CACHE_HOME.
Signed-off-by: Devin Lehmacher <lehmacdj@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
In 4ac9006f83 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally put docstrings with function declarations,
because it's the callers who need to know how the function
works. Let's do so for interpret_branch_name().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a following commit to get the expiration
time of the shared index files from the config, and it is generic
enough to be put in "config.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a commit soon, so let's make
it available globally.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to get the
value of the "splitIndex.maxPercentChange" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to know
if we want to use the split index feature or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last caller of git_mkstemp() was removed in commit 6fec0a89
("verify_signed_buffer: use tempfile object", 16-06-2016). Since
the introduction of the 'tempfile' APIs, along with git_mkstemp_mode,
it is unlikely that new callers will materialize. Remove the dead
code.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
The parse_config_key() function was introduced to make it
easier to match "section.subsection.key" variables. It also
handles the simpler "section.key", and the caller is
responsible for distinguishing the two from its
out-parameters.
Most callers who _only_ want "section.key" would just use a
strcmp(var, "section.key"), since there is no parsing
required. However, they may still use parse_config_key() if
their "section" variable isn't a constant (an example of
this is in parse_hide_refs_config).
Using the parse_config_key is a bit clunky, though:
const char *subsection;
int subsection_len;
const char *key;
if (!parse_config_key(var, section, &subsection, &subsection_len, &key) &&
!subsection) {
/* matched! */
}
Instead, let's treat a NULL subsection as an indication that
the caller does not expect one. That lets us write:
const char *key;
if (!parse_config_key(var, section, NULL, NULL, &key)) {
/* matched! */
}
Existing callers should be unaffected, as passing a NULL
subsection would currently segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert each_loose_object_fn and each_packed_object_fn to take a pointer
to struct object_id. Update the various callbacks. Convert several
40-based constants to use GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are places in the code where we would like to provide a struct
object_id *, yet read the hash directly from the pack. Provide an
nth_packed_object_oid function that is similar to the
nth_packed_object_sha1 function.
In order to avoid a potentially invalid cast, nth_packed_object_oid
provides a variable into which to store the value, which it returns on
success; on error, it returns NULL, as nth_packed_object_sha1 does.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a function, parse_oid_hex, which parses a hexadecimal object
ID and if successful, sets a pointer to just beyond the last character.
This allows for simpler, more robust parsing without needing to
hard-code integer values throughout the codebase.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
When a submodule "A", which has another submodule "B" nested within
it, is "absorbed" into the top-level superproject, the inner
submodule "B" used to be left in a strange state. The logic to
adjust the .git pointers in these submodules has been corrected.
* sb/submodule-recursive-absorb:
submodule absorbing: fix worktree/gitdir pointers recursively for non-moves
cache.h: expose the dying procedure for reading gitlinks
setup: add gentle version of resolve_git_dir
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that returns a buffer containing the absolute path of its
argument and a semantic patch for its intended use. It avoids an extra
string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we want to react to only a subset of errors, defaulting
the rest to die as usual. Separate the block that takes care of dying
into its own function so we have easy access to it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows a93bedada (setup: add gentle version of read_gitfile,
2015-06-09), and assumes the same reasoning. resolve_git_dir is unsuited
for speculative calls, so we want to use the gentle version to find out
about potential errors.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do this by moving the existing documentation from
read-cache.c to cache.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up in the pathspec API.
* bw/pathspec-cleanup:
pathspec: rename prefix_pathspec to init_pathspec_item
pathspec: small readability changes
pathspec: create strip submodule slash helpers
pathspec: create parse_element_magic helper
pathspec: create parse_long_magic function
pathspec: create parse_short_magic function
pathspec: factor global magic into its own function
pathspec: simpler logic to prefix original pathspec elements
pathspec: always show mnemonic and name in unsupported_magic
pathspec: remove unused variable from unsupported_magic
pathspec: copy and free owned memory
pathspec: remove the deprecated get_pathspec function
ls-tree: convert show_recursive to use the pathspec struct interface
dir: convert fill_directory to use the pathspec struct interface
dir: remove struct path_simplify
mv: remove use of deprecated 'get_pathspec()'
"git grep" has been taught to optionally recurse into submodules.
* bw/grep-recurse-submodules:
grep: search history of moved submodules
grep: enable recurse-submodules to work on <tree> objects
grep: optionally recurse into submodules
grep: add submodules as a grep source type
submodules: load gitmodules file from commit sha1
submodules: add helper to determine if a submodule is initialized
submodules: add helper to determine if a submodule is populated
real_path: canonicalize directory separators in root parts
real_path: have callers use real_pathdup and strbuf_realpath
real_path: create real_pathdup
real_path: convert real_path_internal to strbuf_realpath
real_path: resolve symlinks by hand
It's surprisingly hard to ask the sha1_file code to open a
_specific_ incarnation of a loose object. Most of the
functions take a sha1, and loop over the various object
types (packed versus loose) and locations (local versus
alternates) at a low level.
However, some tools like fsck need to look at a specific
file. This patch gives them a function they can use to open
the loose object at a given path.
The implementation unfortunately ends up repeating bits of
related functions, but there's not a good way around it
without some major refactoring of the whole sha1_file stack.
We need to mmap the specific file, then partially read the
zlib stream to know whether we're streaming or not, and then
finally either stream it or copy the data to a buffer.
We can do that by assembling some of the more arcane
internal sha1_file functions, but we end up having to
essentially reimplement unpack_sha1_file(), along with the
streaming bits of check_sha1_signature().
Still, most of the ugliness is contained in the new
function, and the interface is clean enough that it may be
reusable (though it seems unlikely anything but git-fsck
would care about opening a specific file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve constness of the index_state parameter to the
'read_blob_data_from_index' function.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codeflow of setting NOATIME and CLOEXEC on file descriptors Git
opens has been simplified.
We may want to drop the tip one, but we'll see.
* jc/git-open-cloexec:
sha1_file: stop opening files with O_NOATIME
git_open_cloexec(): use fcntl(2) w/ FD_CLOEXEC fallback
git_open(): untangle possible NOATIME and CLOEXEC interactions
Now that all callers of the old 'get_pathspec' interface have been
migrated to use the new pathspec struct interface it can be removed
from the codebase.
Since there are no more users of the '_raw' field in the pathspec struct
it can also be removed. This patch also removes the old functionality
of modifying the const char **argv array that was passed into
parse_pathspec. Instead the constructed 'match' string (which is a
pathspec element with the prefix prepended) is only stored in its
corresponding pathspec_item entry.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that tries to create a file and any containing
directories in a way that is robust against races with other processes
that might be cleaning up empty directories at the same time.
The actual file creation is done by a callback function, which, if it
fails, should set errno to EISDIR or ENOENT according to the convention
of open(). raceproof_create_file() detects such failures, and
respectively either tries to delete empty directories that might be in
the way of the file or tries to create the containing directories. Then
it retries the callback function.
This function is not yet used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit path for SCLD_EXISTS wasn't setting errno, which some callers
use to generate error messages for the user. Fix the problem and
document that the function sets errno correctly to help avoid similar
regressions in the future.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
teach submodules to load a '.gitmodules' file from a commit sha1. This
enables the population of the submodule_cache to be based on the state
of the '.gitmodules' file from a particular commit.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create real_pathdup which returns a caller owned string of the resolved
realpath based on the provide path.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the name of real_path_internal to strbuf_realpath. In addition
push the static strbuf up to its callers and instead take as a
parameter a pointer to a strbuf to use for the final result.
This change makes strbuf_realpath reentrant.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three codepaths that use a variable whose name is
pack_compression_level to affect how objects and deltas sent to a
packfile is compressed. Unlike zlib_compression_level that controls
the loose object compression, however, this variable was static to
each of these codepaths. Two of them read the pack.compression
configuration variable, using core.compression as the default, and
one of them also allowed overriding it from the command line.
The other codepath in bulk-checkin did not pay any attention to the
configuration.
Unify the configuration parsing to git_default_config(), where we
implement the parsing of core.loosecompression and core.compression
and make the former override the latter, by moving code to parse
pack.compression and also allow core.compression to give default to
this variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we open object files, we try to do so with O_NOATIME.
This dates back to 144bde78e9 (Use O_NOATIME when opening
the sha1 files., 2005-04-23), which is an optimization to
avoid creating a bunch of dirty inodes when we're accessing
many objects. But a few things have changed since then:
1. In June 2005, git learned about packfiles, which means
we would do a lot fewer atime updates (rather than one
per object access, we'd generally get one per packfile).
2. In late 2006, Linux learned about "relatime", which is
generally the default on modern installs. So
performance around atimes updates is a non-issue there
these days.
All the world isn't Linux, but as it turns out, Linux
is the only platform to implement O_NOATIME in the
first place.
So it's very unlikely that this code is helping anybody
these days.
Helped-by: Jeff King <peff@peff.net>
[jc: took idea and log message from peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git generally does not explicitly close file descriptors that were
open in the parent process when spawning a child process, but most
of the time the child does not want to access them. As Windows does
not allow removing or renaming a file that has a file descriptor
open, a slow-to-exit child can even break the parent process by
holding onto them. Use O_CLOEXEC flag to open files in various
codepaths.
* ls/git-open-cloexec:
read-cache: make sure file handles are not inherited by child processes
sha1_file: open window into packfiles with O_CLOEXEC
sha1_file: rename git_open_noatime() to git_open()
When fetching from a remote that has many tags that are irrelevant
to branches we are following, we used to waste way too many cycles
when checking if the object pointed at by a tag (that we are not
going to fetch!) exists in our repository too carefully.
* jk/fetch-quick-tag-following:
fetch: use "quick" has_sha1_file for tag following
The way we structured the fallback/retry mechanism for opening with
O_NOATIME and O_CLOEXEC meant that if we failed due to lack of
support to open the file with O_NOATIME option (i.e. EINVAL), we
would still try to drop O_CLOEXEC first and retry, and then drop
O_NOATIME. A platform on which O_NOATIME is defined in the header
without support from the kernel wouldn't have a chance to open with
O_CLOEXEC option due to this code structure.
Arguably, O_CLOEXEC is more important than O_NOATIME, as the latter
is mostly about performance, while the former can affect correctness.
Instead use O_CLOEXEC to open the file, and then use fcntl(2) to set
O_NOATIME on the resulting file descriptor. open(2) itself does not
cause atime to be updated according to Linus [*1*].
The helper to do the former can be usable in the codepath in
ce_compare_data() that was recently added to open a file descriptor
with O_CLOEXEC; use it while we are at it.
*1* <CA+55aFw83E+zOd+z5h-CA-3NhrLjVr-anL6pubrSWttYx3zu8g@mail.gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "git diff --no-index" codepath not to try to peek into .git/
directory that happens to be under the current directory, when we
know we are operating outside any repository.
* jk/no-looking-at-dotgit-outside-repo:
diff: handle sha1 abbreviations outside of repository
diff_aligned_abbrev: use "struct oid"
diff_unique_abbrev: rename to diff_aligned_abbrev
find_unique_abbrev: use 4-buffer ring
test-*-cache-tree: setup git dir
read info/{attributes,exclude} only when in repository
Updates the way approximate count of total objects is computed
while attempting to come up with a unique abbreviated object name,
which in turn needs to estimate how many hexdigits are necessary to
ensure uniqueness.
* jk/abbrev-auto:
find_unique_abbrev: move logic out of get_short_sha1()
Allow the default abbreviation length, which has historically been
7, to scale as the repository grows. The logic suggests to use 12
hexdigits for the Linux kernel, and 9 to 10 for Git itself.
* lt/abbrev-auto:
abbrev: auto size the default abbreviation
abbrev: prepare for new world order
abbrev: add FALLBACK_DEFAULT_ABBREV to prepare for auto sizing
Some code paths want to format multiple abbreviated sha1s in
the same output line. Because we use a single static buffer
for our return value, they have to either break their output
into several calls or allocate their own arrays and use
find_unique_abbrev_r().
Intead, let's mimic sha1_to_hex() and use a ring of several
buffers, so that the return value stays valid through
multiple calls. This shortens some of the callers, and makes
it harder to for them to make a silly mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching from a remote that has many tags that are irrelevant
to branches we are following, we used to waste way too many cycles
when checking if the object pointed at by a tag (that we are not
going to fetch!) exists in our repository too carefully.
* jk/fetch-quick-tag-following:
fetch: use "quick" has_sha1_file for tag following
"git ls-files" learned "--recurse-submodules" option that can be
used to get a listing of tracked files across submodules (i.e. this
only works with "--cached" option, not for listing untracked or
ignored files). This would be a useful tool to sit on the upstream
side of a pipe that is read with xargs to work on all working tree
files from the top-level superproject.
* bw/ls-files-recurse-submodules:
ls-files: add pathspec matching for submodules
ls-files: pass through safe options for --recurse-submodules
ls-files: optionally recurse into submodules
git: make super-prefix option
This function is meant to be used when reading from files in the
object store, and the original objective was to avoid smudging atime
of loose object files too often, hence its name. Because we'll be
extending its role in the next commit to also arrange the file
descriptors they return auto-closed in the child processes, rename
it to lose "noatime" part that is too specific.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepaths involved in interacting alternate object store have
been cleaned up.
* jk/alt-odb-cleanup:
alternates: use fspathcmp to detect duplicates
sha1_file: always allow relative paths to alternates
count-objects: report alternates via verbose mode
fill_sha1_file: write into a strbuf
alternates: store scratch buffer as strbuf
fill_sha1_file: write "boring" characters
alternates: use a separate scratch space
alternates: encapsulate alt->base munging
alternates: provide helper for allocating alternate
alternates: provide helper for adding to alternates list
link_alt_odb_entry: refactor string handling
link_alt_odb_entry: handle normalize_path errors
t5613: clarify "too deep" recursion tests
t5613: do not chdir in main process
t5613: whitespace/style cleanups
t5613: use test_must_fail
t5613: drop test_valid_repo function
t5613: drop reachable_via function
In order for the receiving end of "git push" to inspect the
received history and decide to reject the push, the objects sent
from the sending end need to be made available to the hook and
the mechanism for the connectivity check, and this was done
traditionally by storing the objects in the receiving repository
and letting "git gc" to expire it. Instead, store the newly
received objects in a temporary area, and make them available by
reusing the alternate object store mechanism to them only while we
decide if we accept the check, and once we decide, either migrate
them to the repository or purge them immediately.
* jk/quarantine-received-objects:
tmp-objdir: do not migrate files starting with '.'
tmp-objdir: put quarantine information in the environment
receive-pack: quarantine objects until pre-receive accepts
tmp-objdir: introduce API for temporary object directories
check_connected: accept an env argument
When we auto-follow tags in a fetch, we look at all of the
tags advertised by the remote and fetch ones where we don't
already have the tag, but we do have the object it peels to.
This involves a lot of calls to has_sha1_file(), some of
which we can reasonably expect to fail. Since 45e8a74
(has_sha1_file: re-check pack directory before giving up,
2013-08-30), this may cause many calls to
reprepare_packed_git(), which is potentially expensive.
This has gone unnoticed for several years because it
requires a fairly unique setup to matter:
1. You need to have a lot of packs on the client side to
make reprepare_packed_git() expensive (the most
expensive part is finding duplicates in an unsorted
list, which is currently quadratic).
2. You need a large number of tag refs on the server side
that are candidates for auto-following (i.e., that the
client doesn't have). Each one triggers a re-read of
the pack directory.
3. Under normal circumstances, the client would
auto-follow those tags and after one large fetch, (2)
would no longer be true. But if those tags point to
history which is disconnected from what the client
otherwise fetches, then it will never auto-follow, and
those candidates will impact it on every fetch.
So when all three are true, each fetch pays an extra
O(nr_tags * nr_packs^2) cost, mostly in string comparisons
on the pack names. This was exacerbated by 47bf4b0
(prepare_packed_git_one: refactor duplicate-pack check,
2014-06-30) which uses a slightly more expensive string
check, under the assumption that the duplicate check doesn't
happen very often (and it shouldn't; the real problem here
is how often we are calling reprepare_packed_git()).
This patch teaches fetch to use HAS_SHA1_QUICK to sacrifice
accuracy for speed, in cases where we might be racy with a
simultaneous repack. This is similar to the fix in 0eeb077
(index-pack: avoid excessive re-reading of pack directory,
2015-06-09). As with that case, it's OK for has_sha1_file()
occasionally say "no I don't have it" when we do, because
the worst case is not a corruption, but simply that we may
fail to auto-follow a tag that points to it.
Here are results from the included perf script, which sets
up a situation similar to the one described above:
Test HEAD^ HEAD
----------------------------------------------------------
5550.4: fetch 11.21(10.42+0.78) 0.08(0.04+0.02) -99.3%
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
The presence of the GIT_QUARANTINE_PATH variable lets any
called programs know that they're operating in a temporary
object directory (and where that directory is).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule code wants to temporarily add an alternate
object store to our in-memory alt_odb list, but does it
manually. Let's provide a helper so it can reuse the code in
link_alt_odb_entry().
While we're adding our new add_to_alternates_memory(), let's
document add_to_alternates_file(), as the two are related.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pre-size the scratch buffer to hold a loose object
filename of the form "xx/yyyy...", which leads to allocation
code that is hard to verify. We have to use some magic
numbers during the initial allocation, and then writers must
blindly assume that the buffer is big enough. Using a strbuf
makes it more clear that we cannot overflow.
Unfortunately, we do still need some magic numbers to grow
our strbuf before calling fill_sha1_path(), but the strbuf
growth is much closer to the point of use. This makes it
easier to see that it's correct, and opens the possibility
of pushing it even further down if fill_sha1_path() learns
to work on strbufs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The alternate_object_database struct uses a single buffer
both for storing the path to the alternate, and as a scratch
buffer for forming object names. This is efficient (since
otherwise we'd end up storing the path twice), but it makes
life hard for callers who just want to know the path to the
alternate. They have to remember to stop reading after
"alt->name - alt->base" bytes, and to subtract one for the
trailing '/'.
It would be much simpler if they could simply access a
NUL-terminated path string. We could encapsulate this in a
function which puts a NUL in the scratch buffer and returns
the string, but that opens up questions about the lifetime
of the result. The first time another caller uses the
alternate, the scratch buffer may get other data tacked onto
it.
Let's instead just store the root path separately from the
scratch buffer. There aren't enough alternates being stored
for the duplicated data to matter for performance, and this
keeps things simple and safe for the callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allocating a struct alternate_object_database is tricky, as
we must over-allocate the buffer to provide scratch space,
and then put in particular '/' and NUL markers.
Let's encapsulate this in a function so that the complexity
doesn't leak into callers (and so that we can modify it
later).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a super-prefix environment variable 'GIT_INTERNAL_SUPER_PREFIX'
which can be used to specify a path from above a repository down to its
root. When such a super-prefix is specified, the paths reported by Git
are prefixed with it to make them relative to that directory "above".
The paths given by the user on the command line
(e.g. "git subcmd --output-file=path/to/a/file" and pathspecs) are taken
relative to the directory "above" to match.
The immediate use of this option is by commands which have a
--recurse-submodule option in order to give context to submodules about
how they were invoked. This option is currently only allowed for
builtins which support a super-prefix.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given an abbreviated object name that is not (or more
realistically, "no longer") unique, we gave a fatal error
"ambiguous argument". This error is now accompanied by hints that
lists the objects that begins with the given prefix. During the
course of development of this new feature, numerous minor bugs were
uncovered and corrected, the most notable one of which is that we
gave "short SHA1 xxxx is ambiguous." twice without good reason.
* jk/ambiguous-short-object-names:
get_short_sha1: make default disambiguation configurable
get_short_sha1: list ambiguous objects on error
for_each_abbrev: drop duplicate objects
sha1_array: let callbacks interrupt iteration
get_short_sha1: mark ambiguity error for translation
get_short_sha1: NUL-terminate hex prefix
get_short_sha1: refactor init of disambiguation code
get_short_sha1: parse tags when looking for treeish
get_sha1: propagate flags to child functions
get_sha1: avoid repeating ourselves via ONLY_TO_DIE
get_sha1: detect buggy calls with multiple disambiguators
The get_short_sha1() is only about reading short sha1s; we
do call it in a loop to check "is this long enough" for each
object, but otherwise it should not need to know about
things like our default_abbrev setting.
So instead of asking it to set default_automatic_abbrev as a
side-effect, let's just have find_unique_abbrev() pick the
right place to start its loop. This requires a separate
approximate_object_count() function, but that naturally
belongs with the rest of sha1_file.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init" tried to record core.worktree in the repository's
'config' file when GIT_WORK_TREE environment variable was set and
it was different from where GIT_DIR appears as ".git" at its top,
but the logic was faulty when .git is a "gitdir:" file that points
at the real place, causing trouble in working trees that are
managed by "git worktree". This has been corrected.
* nd/init-core-worktree-in-multi-worktree-world:
init: kill git_link variable
init: do not set unnecessary core.worktree
init: kill set_git_dir_init()
init: call set_git_dir_init() from within init_db()
init: correct re-initialization from a linked worktree
In fairly early days we somehow decided to abbreviate object names
down to 7-hexdigits, but as projects grow, it is becoming more and
more likely to see such a short object names made in earlier days
and recorded in the log messages no longer unique.
Currently the Linux kernel project needs 11 to 12 hexdigits, while
Git itself needs 10 hexdigits to uniquely identify the objects they
have, while many smaller projects may still be fine with the
original 7-hexdigit default. One-size does not fit all projects.
Introduce a mechanism, where we estimate the number of objects in
the repository upon the first request to abbreviate an object name
with the default setting and come up with a sane default for the
repository. Based on the expectation that we would see collision in
a repository with 2^(2N) objects when using object names shortened
to first N bits, use sufficient number of hexdigits to cover the
number of objects in the repository. Each hexdigit (4-bits) we add
to the shortened name allows us to have four times (2-bits) as many
objects in the repository.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll be introducing a new way to decide the default abbreviation
length by initialising DEFAULT_ABBREV to -1 to signal the first call
to "find unique abbreviation" codepath to compute a reasonable value
based on the number of objects we have to avoid collisions.
We have long relied on DEFAULT_ABBREV being a positive concrete
value that is used as the abbreviation length when no extra
configuration or command line option has overridden it. Some
codepaths wants to use such a positive concrete default value
even before making their first request to actually trigger the
computation for the auto sized default.
Introduce FALLBACK_DEFAULT_ABBREV and use it to the code that
attempts to align the report from "git fetch". For now, this
macro is also used to initialize the default_abbrev variable,
but the auto-sizing code will use -1 and then use the value of
FALLBACK_DEFAULT_ABBREV as the starting point of auto-sizing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
When we find ambiguous short sha1s, we may get a
disambiguation rule from our caller's context. But if we
don't, we fall back to treating all sha1s the same, even
though most projects will tend to refer only to commits by
their short sha1s.
This patch introduces a configuration option that lets the
user pick a different fallback (e.g., only commits). It's
possible that we may want to make this the default, but it's
a good idea to start as a config option for two reasons:
1. It lets people experiment with this and see if it's a
good idea (i.e., the "tend to" above is an assumption;
we don't really know if this will break some obscure
cases).
2. Even if we do flip the default, it gives people an
escape hatch if it causes problems (you can sometimes
override it by asking for "1234^{tree}", but not all
combinations are possible).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
The get_sha1() family of functions takes a flags field, but
some of the flags are mutually exclusive. In particular, we
can only handle one disambiguating function, and the flags
quietly override each other. Let's instead detect these as
programming bugs.
Technically some of the flags are supersets of the others,
so treating COMMITTISH|TREEISH as just COMMITTISH is not
wrong, but it's a good sign the caller is confused. And
certainly asking for BLOB|TREE does not work.
We can do the check easily with some bit-twiddling, and as a
bonus, the bit-mask of disambiguators will come in handy in
a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit requires that set_git_dir_init() must be called before
init_db(). Let's make sure nobody can do otherwise.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a static initializer for struct checkout and use it throughout the
code base. It's shorter, avoids a memset(3) call and makes sure the
base_dir member is initialized to a valid (empty) string.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were numerous corner cases in which the configuration files
are read and used or not read at all depending on the directory a
Git command was run, leading to inconsistent behaviour. The code
to set-up repository access at the beginning of a Git process has
been updated to fix them.
* jk/setup-sequence-update:
t1007: factor out repeated setup
init: reset cached config when entering new repo
init: expand comments explaining config trickery
config: only read .git/config from configured repos
test-config: setup git directory
t1302: use "git -C"
pager: handle early config
pager: use callbacks instead of configset
pager: make pager_program a file-local static
pager: stop loading git_default_config()
pager: remove obsolete comment
diff: always try to set up the repository
diff: handle --no-index prefixes consistently
diff: skip implicit no-index check when given --no-index
patch-id: use RUN_SETUP_GENTLY
hash-object: always try to set up the git repository
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
When the chmod option was added to git add, it was hooked up to the diff
machinery, meaning that it only works when the version in the index
differs from the version on disk.
As the option was supposed to mirror the chmod option in update-index,
which always changes the mode in the index, regardless of the status of
the file, make sure the option behaves the same way in git add.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As there are chmod options for both add and update-index, introduce a
new chmod_index_entry function to do the work. Use it in update-index,
while it will be used in add in the next patch.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we copy the templates into place, we re-read the
config in case we copied in a default config file. But since
git_config() is backed by a cache these days, it's possible
that the call will not actually touch the filesystem at all;
we need to tell it that something has changed behind the
scenes.
Note that we also need to reset the shared_repository
config. At first glance, it seems like this should probably
just be folded into git_config_clear(). But unfortunately
that is not quite right. The shared repository value may
come from config, _or_ it may have been set manually. So
only the caller who knows whether or not they set it is the
one who can clear it (and indeed, if you _do_ put it into
git_config_clear(), then many tests fail, as we have to
clear the config cache any time we set a new config
variable).
There are three tests here. The first two actually pass
already, though it's largely luck: they just don't happen to
actually read any config before we enter the new repo.
But the third one does fail without this patch; we look at
core.sharedrepository while creating the directory, but need
to make sure the value from the template config overrides
it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git_config() runs, it looks in the system, user-wide,
and repo-level config files. It gets the latter by calling
git_pathdup(), which in turn calls get_git_dir(). If we
haven't set up the git repository yet, this may simply
return ".git", and we will look at ".git/config". This
seems like it would be helpful (presumably we haven't set up
the repository yet, so it tries to find it), but it turns
out to be a bad idea for a few reasons:
- it's not sufficient, and therefore hides bugs in a
confusing way. Config will be respected if commands are
run from the top-level of the working tree, but not from
a subdirectory.
- it's not always true that we haven't set up the
repository _yet_; we may not want to do it at all. For
instance, if you run "git init /some/path" from inside
another repository, it should not load config from the
existing repository.
- there might be a path ".git/config", but it is not the
actual repository we would find via setup_git_directory().
This may happen, e.g., if you are storing a git
repository inside another git repository, but have
munged one of the files in such a way that the
inner repository is not valid (e.g., by removing HEAD).
We have at least two bugs of the second type in git-init,
introduced by ae5f677 (lazily load core.sharedrepository,
2016-03-11). It causes init to use git_configset(), which
loads all of the config, including values from the current
repo (if any). This shows up in two ways:
1. If we happen to be in an existing repository directory,
we'll read and respect core.sharedrepository from it,
even though it should have no bearing on the new
repository. A new test in t1301 covers this.
2. Similarly, if we're in an existing repo that sets
core.logallrefupdates, that will cause init to fail to
set it in a newly created repository (because it thinks
that the user's templates already did so). A new test
in t0001 covers this.
We also need to adjust an existing test in t1302, which
gives another example of why this patch is an improvement.
That test creates an embedded repository with a bogus
core.repositoryformatversion of "99". It wants to make sure
that we actually stop at the bogus repo rather than
continuing upward to find the outer repo. So it checks that
"git config core.repositoryformatversion" returns 99. But
that only works because we blindly read ".git/config", even
though we _know_ we're in a repository whose vintage we do
not understand.
After this patch, we avoid reading config from the unknown
vintage repository at all, which is a safer choice. But we
need to tweak the test, since core.repositoryformatversion
will not return 99; it will claim that it could not find the
variable at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable is only ever used by the routines in pager.c,
and other parts of the code should always use those routines
(like git_pager()) to make decisions about which pager to
use. Let's reduce its scope to prevent accidents.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git diff --submodule={short,log}" mechanism has been enhanced
to allow "--submodule=diff" to show the patch between the submodule
commits bound to the superproject.
* jk/diff-submodule-diff-inline:
diff: teach diff to display submodule difference with an inline diff
submodule: refactor show_submodule_summary with helper function
submodule: convert show_submodule_summary to use struct object_id *
allow do_submodule_path to work even if submodule isn't checked out
diff: prepare for additional submodule formats
graph: add support for --line-prefix on all graph-aware output
diff.c: remove output_prefix_length field
cache: add empty_tree_oid object and helper function
"git clone --resurse-submodules --reference $path $URL" is a way to
reduce network transfer cost by borrowing objects in an existing
$path repository when cloning the superproject from $URL; it
learned to also peek into $path for presense of corresponding
repositories of submodules and borrow objects from there when able.
* sb/submodule-clone-rr:
clone: recursive and reference option triggers submodule alternates
clone: implement optional references
clone: clarify option_reference as required
clone: factor out checking for an alternate path
submodule--helper update-clone: allow multiple references
submodule--helper module-clone: allow multiple references
t7408: merge short tests, factor out testing method
t7408: modernize style
The reflog output format is documented better, and a new format
--date=unix to report the seconds-since-epoch (without timezone)
has been added.
* jk/reflog-date:
date: clarify --date=raw description
date: add "unix" format
date: document and test "raw-local" mode
doc/pretty-formats: explain shortening of %gd
doc/pretty-formats: describe index/time formats for %gd
doc/rev-list-options: explain "-g" output formats
doc/rev-list-options: clarify "commit@{Nth}" for "-g" option
"git merge" with renormalization did not work well with
merge-recursive, due to "safer crlf" conversion kicking in when it
shouldn't.
* jc/renormalize-merge-kill-safer-crlf:
merge: avoid "safer crlf" during recording of merge results
convert: unify the "auto" handling of CRLF
All of the callers of this function use struct object_id, so rename it
to get_oid_mb and make it take struct object_id instead of
unsigned char *.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and use a helper function that decodes the char value of two
hexadecimal digits. It returns a negative number on error, avoids
running over the end of the given string and doesn't shift negative
values.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, do_submodule_path will attempt locating the .git directory by
using read_gitfile on <path>/.git. If this fails it just assumes the
<path>/.git is actually a git directory.
This is good because it allows for handling submodules which were cloned
in a regular manner first before being added to the superproject.
Unfortunately this fails if the <path> is not actually checked out any
longer, such as by removing the directory.
Fix this by checking if the directory we found is actually a gitdir. In
the case it is not, attempt to lookup the submodule configuration and
find the name of where it is stored in the .git/modules/ directory of
the superproject.
If we can't locate the submodule configuration, this might occur because
for example a submodule gitlink was added but the corresponding
.gitmodules file was not properly updated. A die() here would not be
pleasant to the users of submodule diff formats, so instead, modify
do_submodule_path() to return an error code:
- git_pathdup_submodule() returns NULL when we fail to find a path.
- strbuf_git_path_submodule() propagates the error code to the caller.
Modify the callers of these functions to check the error code and fail
properly. This ensures we don't attempt to use a bad path that doesn't
match the corresponding submodule.
Because this change fixes add_submodule_odb() to work even if the
submodule is not checked out, update the wording of the submodule log
diff format to correctly display that the submodule is "not initialized"
instead of "not checked out"
Add tests to ensure this change works as expected.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to is_null_oid(), and is_empty_blob_sha1() add an
empty_tree_oid along with helper function is_empty_tree_oid(). For
completeness, also add an "is_empty_tree_sha1()",
"is_empty_blob_sha1()", "is_empty_tree_oid()" and "is_empty_blob_oid()"
helpers.
To ensure we only get one singleton, implement EMPTY_BLOB_SHA1_BIN as
simply getting the hash of empty_blob_oid structure.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we want to determine if a path is suitable as an
alternate from other commands than builtin/clone. Move the checking
functionality of `add_one_reference` to `compute_alternate_path` that is
defined in cache.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various small fixups to the "GIT_TRACE" facility.
* jk/trace-fixup:
trace: do not fall back to stderr
write_or_die: drop write_or_whine_pipe()
trace: disable key after write error
trace: correct variable name in write() error message
trace: cosmetic fixes for error messages
trace: use warning() for printing trace errors
trace: stop using write_or_whine_pipe()
trace: handle NULL argument in trace_disable()
Not-so-recent rewrite of "git am" that started making internal
calls into the commit machinery had an unintended regression, in
that no matter how many seconds it took to apply many patches, the
resulting committer timestamp for the resulting commits were all
the same.
* jk/reset-ident-time-per-commit:
am: reset cached ident date for each patch
Some code may have a pack/offset pair for an object, but
would like to look up more information. Using
sha1_object_info() is too heavy-weight; it starts from the
sha1 and has to find the pack again (so not only does it waste
time, it might not even find the same instance).
In some cases, this problem is solved by helpers like
get_size_from_delta(), which is used by pack-objects to take
a shortcut for objects whose packed representation has
already been found. But there's no similar function for
getting the object type, for instance. Rather than introduce
one, let's just make the whole packed_object_info() available.
It is smart enough to spend effort only on the items the
caller wants.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An all-zero initializer is fine for this struct, but because
the first element is a pointer, call sites need to know to
use "NULL" instead of "0". Otherwise some static checkers
like "sparse" will complain; see d099b71 (Fix some sparse
warnings, 2013-07-18) for example. So let's provide an
initializer to make this easier to get right.
But let's also comment that memset() to zero is explicitly
OK[1]. One of the callers embeds object_info in another
struct which is initialized via memset (expand_data in
builtin/cat-file.c). Since our subset of C doesn't allow
assignment from a compound literal, handling this in any
other way is awkward, so we'd like to keep the ability to
initialize by memset(). By documenting this property, it
should make anybody who wants to change the initializer
think twice before doing so.
There's one other caller of interest. In parse_sha1_header(),
we did not initialize the struct fully in the first place.
This turned out not to be a bug because the sub-function it
calls does not look at any other fields except the ones we
did initialize. But that assumption might not hold in the
future, so it's a dangerous construct. This patch switches
it to initializing the whole struct, which protects us
against unexpected reads of the other fields.
[1] Obviously using memset() to initialize a pointer
violates the C standard, but we long ago decided that it
was an acceptable tradeoff in the real world.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not-so-recent rewrite of "git am" that started making internal
calls into the commit machinery had an unintended regression, in
that no matter how many seconds it took to apply many patches, the
resulting committer timestamp for the resulting commits were all
the same.
* jk/reset-ident-time-per-commit:
am: reset cached ident date for each patch
"git pack-objects" has a few options that tell it not to pack
objects found in certain packfiles, which require it to scan .idx
files of all available packs. The codepaths involved in these
operations have been optimized for a common case of not having any
non-local pack and/or any .kept pack.
* jk/pack-objects-optim:
pack-objects: compute local/ignore_pack_keep early
pack-objects: break out of want_object loop early
find_pack_entry: replace last_found_pack with MRU cache
add generic most-recently-used list
sha1_file: drop free_pack_by_name
t/perf: add tests for many-pack scenarios
The reflog output format is documented better, and a new format
--date=unix to report the seconds-since-epoch (without timezone)
has been added.
* jk/reflog-date:
date: clarify --date=raw description
date: add "unix" format
date: document and test "raw-local" mode
doc/pretty-formats: explain shortening of %gd
doc/pretty-formats: describe index/time formats for %gd
doc/rev-list-options: explain "-g" output formats
doc/rev-list-options: clarify "commit@{Nth}" for "-g" option
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
This function has no callers, and is not likely to gain any
because it's confusing to use.
It unconditionally complains to stderr, but _doesn't_ die.
Yet any caller which wants a "gentle" write would generally
want to suppress the error message, because presumably
they're going to write a better one, and/or try the
operation again.
And the check_pipe() call leads to confusing behaviors. It
means we die for EPIPE, but not for other errors, which is
confusing and pointless.
On top of all that, it has unusual error return semantics,
which makes it easy for callers to get it wrong.
Let's drop the function, and if somebody ever needs to
resurrect something like it, they can fix these warts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we compute the date to go in author/committer lines of
commits, or tagger lines of tags, we get the current date
once and then cache it for the rest of the program. This is
a good thing in some cases, like "git commit", because it
means we do not racily assign different times to the
author/committer fields of a single commit object.
But as more programs start to make many commits in a single
process (e.g., the recently builtin "git am"), it means that
you'll get long strings of commits with identical committer
timestamps (whereas before, we invoked "git commit" many
times and got true timestamps).
This patch addresses it by letting callers reset the cached
time, which means they'll get a fresh time on their next
call to git_committer_info() or git_author_info(). The first
caller to do so is "git am", which resets the time for each
patch it applies.
It would be nice if we could just do this automatically
before filling in the ident fields of commit and tag
objects. Unfortunately, it's hard to know where a particular
logical operation begins and ends.
For instance, if commit_tree_extended() were to call
reset_ident_date() before getting the committer/author
ident, that doesn't quite work; sometimes the author info is
passed in to us as a parameter, and it may or may not have
come from a previous call to ident_default_date(). So in
those cases, we lose the property that the committer and the
author timestamp always match.
You could similarly put a date-reset at the end of
commit_tree_extended(). That actually works in the current
code base, but it's fragile. It makes the assumption that
after commit_tree_extended() finishes, the caller has no
other operations that would logically want to fall into the
same timestamp.
So instead we provide the tool to easily do the reset, and
let the high-level callers use it to annotate their own
logical operations.
There's no automated test, because it would be inherently
racy (it depends on whether the program takes multiple
seconds to run). But you can see the effect with something
like:
# make a fake 100-patch series
top=$(git rev-parse HEAD)
bottom=$(git rev-list --first-parent -100 HEAD | tail -n 1)
git log --format=email --reverse --first-parent \
--binary -m -p $bottom..$top >patch
# now apply it; this presumably takes multiple seconds
git checkout --detach $bottom
git am <patch
# now count the number of distinct committer times;
# prior to this patch, there would only be one, but
# now we'd typically see several.
git log --format=%ct $bottom.. | sort -u
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each pack has an index for looking up entries in O(log n)
time, but if we have multiple packs, we have to scan through
them linearly. This can produce a measurable overhead for
some operations.
We dealt with this long ago in f7c22cc (always start looking
up objects in the last used pack first, 2007-05-30), which
keeps what is essentially a 1-element most-recently-used
cache. In theory, we should be able to do better by keeping
a similar but longer cache, that is the same length as the
pack-list itself.
Since we now have a convenient generic MRU structure, we can
plug it in and measure. Here are the numbers for running
p5303 against linux.git:
Test HEAD^ HEAD
------------------------------------------------------------------------
5303.3: rev-list (1) 31.56(31.28+0.27) 31.30(31.08+0.20) -0.8%
5303.4: repack (1) 40.62(39.35+2.36) 40.60(39.27+2.44) -0.0%
5303.6: rev-list (50) 31.31(31.06+0.23) 31.23(31.00+0.22) -0.3%
5303.7: repack (50) 58.65(69.12+1.94) 58.27(68.64+2.05) -0.6%
5303.9: rev-list (1000) 38.74(38.40+0.33) 31.87(31.62+0.24) -17.7%
5303.10: repack (1000) 367.20(441.80+4.62) 342.00(414.04+3.72) -6.9%
The main numbers of interest here are the rev-list ones
(since that is exercising the normal object lookup code
path). The single-pack case shouldn't improve at all; the
260ms speedup there is just part of the run-to-run noise
(but it's important to note that we didn't make anything
worse with the overhead of maintaining our cache). In the
50-pack case, we see similar results. There may be a slight
improvement, but it's mostly within the noise.
The 1000-pack case does show a big improvement, though. That
carries over to the repack case, as well. Even though we
haven't touched its pack-search loop yet, it does still do a
lot of normal object lookups (e.g., for the internal
revision walk), and so improves.
As a point of reference, I also ran the 1000-pack test
against a version of HEAD^ with the last_found_pack
optimization disabled. It takes ~60s, so that gives an
indication of how much even the single-element cache is
helping.
For comparison, here's a smaller repository, git.git:
Test HEAD^ HEAD
---------------------------------------------------------------------
5303.3: rev-list (1) 1.56(1.54+0.01) 1.54(1.51+0.02) -1.3%
5303.4: repack (1) 1.84(1.80+0.10) 1.82(1.80+0.09) -1.1%
5303.6: rev-list (50) 1.58(1.55+0.02) 1.59(1.57+0.01) +0.6%
5303.7: repack (50) 2.50(3.18+0.04) 2.50(3.14+0.04) +0.0%
5303.9: rev-list (1000) 2.76(2.71+0.04) 2.24(2.21+0.02) -18.8%
5303.10: repack (1000) 13.21(19.56+0.25) 11.66(18.01+0.21) -11.7%
You can see that the percentage improvement is similar.
That's because the lookup we are optimizing is roughly
O(nr_objects * nr_packs). Since the number of packs is
constant in both tests, we'd expect the improvement to be
linear in the number of objects. But the whole process is
also linear in the number of objects, so the improvement
is a constant factor.
The exact improvement does also depend on the contents of
the packs. In p5303, the extra packs all have 5 first-parent
commits in them, which is a reasonable simulation of a
pushed-to repository. But it also means that only 250
first-parent commits are in those packs (compared to almost
50,000 total in linux.git), and the rest are in the huge
"base" pack. So once we start looking at history in taht big
pack, that's where we'll find most everything, and even the
1-element cache gets close to 100% cache hits. You could
almost certainly show better numbers with a more
pathological case (e.g., distributing the objects more
evenly across the packs). But that's simply not that
realistic a scenario, so it makes more sense to focus on
these numbers.
The implementation itself is a straightforward application
of the MRU code. We provide an MRU-ordered list of packs
that shadows the packed_git list. This is easy to do because
we only create and revise the pack list in one place. The
"reprepare" code path actually drops the whole MRU and
replaces it for simplicity. It would be more efficient to
just add new entries, but there's not much point in
optimizing here; repreparing happens rarely, and only after
doing a lot of other expensive work. The key things to keep
optimized are traversal (which is just a normal linked list,
albeit with one extra level of indirection over the regular
packed_git list), and marking (which is a constant number of
pointer assignments, though slightly more than the old
last_found_pack was; it doesn't seem to create a measurable
slowdown, though).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of this function is to drop an entry from the
"packed_git" cache that points to a file we might be
overwriting, because our contents may not be the same (and
hence the only caller was pack-objects as it moved a
temporary packfile into place).
In older versions of git, this could happen because the
names of packfiles were derived from the set of objects they
contained, not the actual bits on disk. But since 1190a1a
(pack-objects: name pack files after trailer hash,
2013-12-05), the name reflects the actual bits on disk, and
any two packfiles with the same name can be used
interchangeably.
Dropping this function not only saves a few lines of code,
it makes the lifetime of "struct packed_git" much easier to
reason about: namely, we now do not ever free these structs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
Introduced in 473166b ("config: add 'origin_type' to config_source
struct", 2016-02-19), Git can inform the user about the origin of a
config error, but the implementation does not allow translators to
translate the keywords 'file', 'blob, 'standard input', and
'submodule-blob'. Moreover, for the second message, a reason for the
error is appended to the message, not allowing translators to translate
that reason either.
Unfold the message into several templates for each known origin_type.
That would result in better translation at the expense of code
verbosity.
Add enum config_oringin_type to ease management of the various
configuration origin types (blob, file, etc). Previously origin type
was considered from command line if cf->origin_type == NULL, i.e.,
uninitialized. Now we set origin_type to CONFIG_ORIGIN_CMDLINE in
git_config_from_parameters() and configset_add_value().
For error message in git_parse_source(), use xstrfmt() function to
prepare the message string, instead of doing something like it's done
for die_bad_number(), because intelligibility and code conciseness are
improved for that instance.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have "--date=raw", which is a Unix epoch
timestamp plus a contextual timezone (either the author's or
the local). But one may not care about the timezone and just
want the epoch timestamp by itself. It's not hard to parse
the two apart, but if you are using a pretty-print format,
you may want git to show the "finished" form that the user
will see.
We can accomodate this by adding a new date format, "unix",
which is basically "raw" without the timezone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge" with renormalization did not work well with
merge-recursive, due to "safer crlf" conversion kicking in when it
shouldn't.
* jc/renormalize-merge-kill-safer-crlf:
merge: avoid "safer crlf" during recording of merge results
convert: unify the "auto" handling of CRLF
Further preparatory work on the refs API before the pluggable
backend series can land.
* mh/split-under-lock: (33 commits)
lock_ref_sha1_basic(): only handle REF_NODEREF mode
commit_ref_update(): remove the flags parameter
lock_ref_for_update(): don't resolve symrefs
lock_ref_for_update(): don't re-read non-symbolic references
refs: resolve symbolic refs first
ref_transaction_update(): check refname_is_safe() at a minimum
unlock_ref(): move definition higher in the file
lock_ref_for_update(): new function
add_update(): initialize the whole ref_update
verify_refname_available(): adjust constness in declaration
refs: don't dereference on rename
refs: allow log-only updates
delete_branches(): use resolve_refdup()
ref_transaction_commit(): correctly report close_ref() failure
ref_transaction_create(): disallow recursive pruning
refs: make error messages more consistent
lock_ref_sha1_basic(): remove unneeded local variable
read_raw_ref(): move docstring to header file
read_raw_ref(): improve docstring
read_raw_ref(): rename symref argument to referent
...
General code clean-up around a helper function to write a
single-liner to a file.
* jk/write-file:
branch: use write_file_buf instead of write_file
use write_file_buf where applicable
write_file: add format attribute
write_file: add pointer+len variant
write_file: use xopen
write_file: drop "gently" form
branch: use non-gentle write_file for branch description
am: ignore return value of write_file()
config: fix bogus fd check when setting up default config
This field, filled by sha1_object_info() contains the on-disk size of
an object, which could go over 4GB limit of unsigned long on 32-bit
systems. Use off_t for it instead and update all callers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merge_recursive() decides what the correct blob object merge
result for a path should be, it uses update_file_flags() helper
function to write it out to a working tree file and then calls
add_cacheinfo(). The add_cacheinfo() function in turn calls
make_cache_entry() to create a new cache entry to replace the
higher-stage entries for the path that represents the conflict.
The make_cache_entry() function calls refresh_cache_entry() to fill
in the cached stat information. To mark a cache entry as
up-to-date, the data is re-read from the file in the working tree,
and goes through convert_to_git() conversion to be compared with the
blob object name the new cache entry records.
It is important to note that this happens while the higher-stage
entries, which are going to be replaced with the new entry, are
still in the index. Unfortunately, the convert_to_git() conversion
has a misguided "safer crlf" mechanism baked in, and looks at the
existing cache entry for the path to decide how to convert the
contents in the working tree file. If our side (i.e. stage#2)
records a text blob with CRLF in it, even when the system is
configured to record LF in blobs and convert them to CRLF upon
checkout (and back to LF upon checkin), the "safer crlf" mechanism
stops us doing so.
This especially poses a problem during a renormalizing merge, where
the merge result for the path is computed by first "normalizing" the
blobs involved in the merge by using convert_to_working_tree()
followed by convert_to_git() with "safer crlf" disabled. The merge
result that is computed correctly and fed to add_cacheinfo() via
update_file_flags() does _not_ match what refresh_cache_entry() sees
by converting the working tree file via convert_to_git().
We can work this around by not refreshing the new cache entry in
make_cache_entry() called by add_cacheinfo(). After add_cacheinfo()
adds the new entry, we can call refresh_cache_entry() on that,
knowing that addition of this new cache entry would have removed the
stale cache entries that had CRLF in stage #2 that were carried over
before the renormalizing merge started and will not interfere with
the correct recording of the result.
The test update was taken from a series by Torsten Bögershausen
that attempted to fix this with a different approach.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
This gives us compile-time checking of our format strings,
which is a good thing.
I had also hoped it would help with confusing write_file()
and write_file_buf(), since the former's "..." can make it
match the signature of the latter. But given that the buffer
for write_file_buf() is generally not a string literal, the
compiler won't complain unless -Wformat-nonliteral is on,
and that creates a ton of false positives elsewhere in the
code base.
While we're there, let's also give the function a docstring,
which it never had.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many callsites which could use write_file, but for
which it is a little awkward because they have a strbuf or
other pointer/len combo. Specifically:
1. write_file() takes a format string, so we have to use
"%s" or "%.*s", which are ugly.
2. Using any form of "%s" does not handle embedded NULs in
the output. That probably doesn't matter for our
call-sites, but it's nicer not to have to worry.
3. It's less efficient; we format into another strbuf
just to do the write. That's probably not measurably
slow for our uses, but it's simply inelegant.
We can fix this by providing a helper to write out the
formatted buffer, and just calling it from write_file().
Note that we don't do the usual "complete with a newline"
that write_file does. If the caller has their own buffer,
there's a reasonable chance they're doing something more
complicated than a single line, and they can call
strbuf_complete_line() themselves.
We could go even further and add strbuf_write_file(), but it
doesn't save much:
- write_file_buf(path, sb.buf, sb.len);
+ strbuf_write_file(&sb, path);
It would also be somewhat asymmetric with strbuf_read_file,
which actually returns errors rather than dying (and the
error handling is most of the benefit of write_file() in the
first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of write_file_gently(). Let's drop
it, as it doesn't seem likely for new callers to be added
(since its inception, the only callers who wanted the gentle
form generally just died immediately themselves, and have
since been converted).
While we're there, let's also drop the "int" return from
write_file, as it is never meaningful (in the non-gentle
form, we always either die or return 0).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"upload-pack" allows a custom "git pack-objects" replacement when
responding to "fetch/clone" via the uploadpack.packObjectsHook.
* jk/upload-pack-hook:
upload-pack: provide a hook for running pack-objects
t1308: do not get fooled by symbolic links to the source tree
config: add a notion of "scope"
config: return configset value for current_config_ functions
config: set up config_source for command-line config
git_config_parse_parameter: refactor cleanup code
git_config_with_options: drop "found" counting
This function works just like sha1_to_hex_r, except that it takes a
pointer to struct object_id instead of a pointer to unsigned char.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the last caller of this function is gone, and new ones are
unlikely to appear, because this function is doing very little that
a regular if() does not besides obfuscating the error message (and
if we ever did want something like it, we would probably prefer the
function to come back with more "normal" return value semantics).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The executable bit will not be detected (and therefore will not be
set) for paths in a repository with `core.filemode` set to false,
though the users may still wish to add files as executable for
compatibility with other users who _do_ have `core.filemode`
functionality. For example, Windows users adding shell scripts may
wish to add them as executable for compatibility with users on
non-Windows.
Although this can be done with a plumbing command
(`git update-index --add --chmod=+x foo`), teaching the `git-add`
command allows users to set a file executable with a command that
they're already familiar with.
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A config callback passed to git_config() doesn't know very
much about the context in which it sees a variable. It can
ask whether the variable comes from a file, and get the file
name. But without analyzing the filename (which is hard to
do accurately), it cannot tell whether it is in system-level
config, user-level config, or repo-specific config.
Generally this doesn't matter; the point of not passing this
to the callback is that it should treat the config the same
no matter where it comes from. But some programs, like
upload-pack, are a special case: we should be able to run
them in an untrusted repository, which means we cannot use
any "dangerous" config from the repository config file (but
it is OK to use it from system or user config).
This patch teaches the config code to record the "scope" of
each variable, and make it available inside config
callbacks, similar to how we give access to the filename.
The scope is the starting source for a particular parsing
operation, and remains the same even if we include other
files (so a .git/config which includes another file will
remain CONFIG_SCOPE_REPO, as it would be similarly
untrusted).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 473166b (config: add 'origin_type' to config_source
struct, 2016-02-19) added accessor functions for the origin
type and name, it taught them only to look at the "cf"
struct that is filled in while we are parsing the config.
This is sufficient to make it work with git-config, which
uses git_config_with_options() under the hood. That function
freshly parses the config files and triggers the callback
when it parses each key.
Most git programs, however, use git_config(). This interface
will populate a cache during the actual parse, and then
serve values from the cache. Calling current_config_filename()
in a callback here will find a NULL cf and produce an error.
There are no such callers right now, but let's prepare for
adding some by making this work.
We already record source information in a struct attached to
each value. We just need to make it globally available and
then consult it from the accessor functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
A new configuration variable core.hooksPath allows customizing
where the hook directory is.
* ab/hooks:
hooks: allow customizing where the hook directory is
githooks.txt: minor improvements to the grammar & phrasing
githooks.txt: amend dangerous advice about 'update' hook ACL
githooks.txt: improve the intro section
On Unix (and Linux), files and directories whose names start with a dot
are usually not shown by default. This convention is used by Git: the
.git/ directory should be left alone by regular users, and only accessed
through Git itself.
On Windows, no such convention exists. Instead, there is an explicit flag
to mark files or directories as hidden.
In the early days, Git for Windows did not mark the .git/ directory (or
for that matter, any file or directory whose name starts with a dot)
hidden. This lead to quite a bit of confusion, and even loss of data.
Consequently, Git for Windows introduced the core.hideDotFiles setting,
with three possible values: true, false, and dotGitOnly, defaulting to
marking only the .git/ directory as hidden.
The rationale: users do not need to access .git/ directly, and indeed (as
was demonstrated) should not really see that directory, either. However,
not all dot files should be hidden by default, as e.g. Eclipse does not
show them (and the user would therefore be unable to see, say, a
.gitattributes file).
In over five years since the last attempt to bring this patch into core
Git, a slightly buggy version of this patch has served Git for Windows'
users well: no single report indicated problems with the hidden .git/
directory, and the stream of problems caused by the previously non-hidden
.git/ directory simply stopped. The bugs have been fixed during the
process of getting this patch upstream.
Note that there is a funny quirk we have to pay attention to when
creating hidden files: we use Win32's _wopen() function which
transmogrifies its arguments and hands off to Win32's CreateFile()
function. That latter function errors out with ERROR_ACCESS_DENIED (the
equivalent of EACCES) when the equivalent of the O_CREAT flag was passed
and the file attributes (including the hidden flag) do not match an
existing file's. And _wopen() accepts no parameter that would be
transmogrified into said hidden flag. Therefore, we simply try again
without O_CREAT.
A slightly different method is required for our fopen()/freopen()
function as we cannot even *remove* the implicit O_CREAT flag.
Therefore, we briefly mark existing files as unhidden when opening them
via fopen()/freopen().
The ERROR_ACCESS_DENIED error can also be triggered by opening a file
that is marked as a system file (which is unlikely to be tracked in
Git), and by trying to create a file that has *just* been deleted and is
awaiting the last open handles to be released (which would be handled
better by the "Try again?" logic, a story for a different patch series,
though). In both cases, it does not matter much if we try again without
the O_CREAT flag, read: it does not hurt, either.
For details how ERROR_ACCESS_DENIED can be triggered, see
https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858
Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com>
Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move from unsigned char[20] to struct object_id continues.
* bc/object-id:
match-trees: convert several leaf functions to use struct object_id
tree-walk: convert tree_entry_extract() to use struct object_id
struct name_entry: use struct object_id instead of unsigned char sha1[20]
match-trees: convert shift_tree() and shift_tree_by() to use object_id
test-match-trees: convert to use struct object_id
sha1-name: introduce a get_oid() function
Document the difference between this function and
safe_create_leading_directories_const(), and that the former restores
path before returning.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
These are mostly convenient functions to reduce code duplication. Most
of the time, we should be able to get by with git_path() which handles
$GIT_COMMON_DIR internally. However there are a few cases where we need
to construct paths manually, for example some paths from a specific
worktree. These functions will enable that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its last call site was replaced by mks_tempfile_ts() in 284098f (diff:
use tempfile module - 2015-08-12) and there's a good chance
mks_tempfile_ts will continue to successfully handle this job. Delete
it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_oid() function is equivalent to the get_sha1() function, but
uses a struct object_id instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
Nobody reads this anymore, and they're not likely to; the
interesting thing is whether or not we passed
check_repository_format(), and possibly the individual
"extension" variables.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, check_repository_format_gently would parse
the config with a single callback, and that callback would
set up a bunch of global variables. But now that we have
separate workdirs, we have to be more careful. Commit
31e26eb (setup.c: support multi-checkout repo setup,
2014-11-30) introduced a reduced callback which omits some
values like core.worktree. In the "main" callback we call
the reduced one, and then add back in the missing variables.
Now that we have split the config-parsing from the munging
of the global variables, we can do it all with a single
callback, and keep all of the "are we in a separate workdir"
logic together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to know if we're in a git repository of
reasonable vintage, we can call check_repository_format_gently(),
which does three things:
1. Reads the config from the .git/config file.
2. Verifies that the version info we read is sane.
3. Writes some global variables based on this.
There are a few things we could improve here.
One is that steps 1 and 3 happen together. So if the
verification in step 2 fails, we still clobber the global
variables. This is especially bad if we go on to try another
repository directory; we may end up with a state of mixed
config variables.
The second is there's no way to ask about the repository
version for anything besides the main repository we're in.
git-init wants to do this, and it's possible that we would
want to start doing so for submodules (e.g., to find out
which ref backend they're using).
We can improve both by splitting the first two steps into
separate functions. Now check_repository_format_gently()
calls out to steps 1 and 2, and does 3 only if step 2
succeeds.
Note that the public interface for read_repository_format()
and what check_repository_format_gently() needs from it are
not quite the same, leading us to have an extra
read_repository_format_1() helper. The extra needs from
check_repository_format_gently() will go away in a future
patch, and we can simplify this then to just the public
interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no more callers, and it's a rather confusing
interface. This could just be folded into
git_config_with_options(), but for the sake of readability,
we'll leave it as a separate (static) helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It would be useful to control access to the global
shared_repository, so that we can lazily load its config.
The first step to doing so is to make sure all access
goes through a set of functions.
This step is purely mechanical, and should result in no
change of behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function's interface is rather enigmatic, so let's
document it further.
While we're here, let's also drop the return value. It will
always either be "0" or the function will die (consequently,
neither of its two callers bothered to check the return).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to read the pack data using the offsets stored in the pack
idx file has been made more carefully check the validity of the
data in the idx.
* jk/pack-idx-corruption-safety:
sha1_file.c: mark strings for translation
use_pack: handle signed off_t overflow
nth_packed_object_offset: bounds-check extended offset
t5313: test bounds-checks of corrupted/malicious pack/idx files
The "v(iew)" subcommand of the interactive "git am -i" command was
broken in 2.6.0 timeframe when the command was rewritten in C.
* jc/am-i-v-fix:
am -i: fix "v"iew
pager: factor out a helper to prepare a child process to run the pager
pager: lose a separate argv[]
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
Commit a60645f (setup: remember whether repository was
found, 2010-08-05) introduced the startup_info structure,
which records some parts of the setup_git_directory()
process (notably, whether we actually found a repository or
not).
One of the uses of this data is for functions to behave
appropriately based on whether we are in a repo. But the
startup_info struct is just a pointer to storage provided by
the main program, and the only program that sets it up is
the git.c wrapper. Thus builtins have access to
startup_info, but externally linked programs do not.
Worse, library code which is accessible from both has to be
careful about accessing startup_info. This can be used to
trigger a die("BUG") via get_sha1():
$ git fast-import <<-\EOF
tag foo
from HEAD:./whatever
EOF
fatal: BUG: startup_info struct is not initialized.
Obviously that's fairly nonsensical input to feed to
fast-import, but we should never hit a die("BUG"). And there
may be other ways to trigger it if other non-builtins
resolve sha1s.
So let's point the storage for startup_info to a static
variable in setup.c, making it available to all users of the
library code. We _could_ turn startup_info into a regular
extern struct, but doing so would mean tweaking all of the
existing use sites. So let's leave the pointer indirection
in place. We can, however, drop any checks for NULL, as
they will always be false (and likewise, we can drop the
test covering this case, which was a rather artificial
situation using one of the test-* programs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to read the pack data using the offsets stored in the pack
idx file has been made more carefully check the validity of the
data in the idx.
* jk/pack-idx-corruption-safety:
sha1_file.c: mark strings for translation
use_pack: handle signed off_t overflow
nth_packed_object_offset: bounds-check extended offset
t5313: test bounds-checks of corrupted/malicious pack/idx files
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
The configuration system has been taught to phrase where it found a
bad configuration variable in a better way in its error messages.
"git config" learnt a new "--show-origin" option to indicate where
the values come from.
* ls/config-origin:
config: add '--show-origin' option to print the origin of a config value
config: add 'origin_type' to config_source struct
rename git_config_from_buf to git_config_from_mem
t: do not hide Git's exit code in tests using 'nul_to_q'
If a pack .idx file has a corrupted offset for an object, we
may try to access an offset in the .idx or .pack file that
is larger than the file's size. For the .pack case, we have
use_pack() to protect us, which realizes the access is out
of bounds. But if the corrupted value asks us to look in the
.idx file's secondary 64-bit offset table, we blindly add it
to the mmap'd index data and access arbitrary memory.
We can fix this with a simple bounds-check compared to the
size we found when we opened the .idx file.
Note that there's similar code in index-pack that is
triggered only during "index-pack --verify". To support
both, we pull the bounds-check into a separate function,
which dies when it sees a corrupted file.
It would be nice if we could return an error, so that the
pack code could try to find a good copy of the object
elsewhere. Currently nth_packed_object_offset doesn't have
any way to return an error, but it could probably use "0" as
a sentinel value (since no object can start there). This is
the minimal fix, and we can improve the resilience later on
top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "v(iew)" subcommand of the interactive "git am -i" command was
broken in 2.6.0 timeframe when the command was rewritten in C.
* jc/am-i-v-fix:
am -i: fix "v"iew
pager: factor out a helper to prepare a child process to run the pager
pager: lose a separate argv[]
Paths that have been told the index about with "add -N" are not
quite yet in the index, but a few commands behaved as if they
already are in a harmful way.
* nd/ita-cleanup:
grep: make it clear i-t-a entries are ignored
add and use a convenience macro ce_intent_to_add()
blame: remove obsolete comment
Rename git_config_set_or_die functions to git_config_set, leading
to the new default behavior of dying whenever a configuration
error occurs.
By now all callers that shall die on error have been transitioned
to the _or_die variants, thus making this patch a simple rename
of the functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
