"git rebase -i" recently started misbehaving when a submodule that
is configured with 'submodule.<name>.ignore' is dirty; this has
been corrected.
* bw/rebase-i-ignored-submodule-fix:
wt-status: actually ignore submodules when requested
Since ff6f1f564 (submodule-config: lazy-load a repository's .gitmodules
file, 2017-08-03) rebase interactive fails if there are any submodules
with unstaged changes which have been configured with a value for
'submodule.<name>.ignore' in the repository's config.
This is due to how configured values of 'submodule.<name>.ignore' are
handled in addition to a change in how the submodule config is loaded.
When the diff machinery hits a submodule (gitlink as well as a
corresponding entry in the submodule subsystem) it will read the value
of 'submodule.<name>.ignore' stored in the repository's config and if
the config is present it will clear the 'IGNORE_SUBMODULES' (which is
the flag explicitly requested by rebase interactive),
'IGNORE_UNTRACKED_IN_SUBMODULES', and 'IGNORE_DIRTY_SUBMODULES' diff
flags and then set one of them based on the configured value.
Historically this wasn't a problem because the submodule subsystem
wasn't initialized because the .gitmodules file wasn't explicitly loaded
by the rebase interactive command. So when the diff machinery hit a
submodule it would skip over reading any configured values of
'submodule.<name>.ignore'.
In order to preserve the behavior of submodules being ignored by rebase
interactive, also set the 'OVERRIDE_SUBMODULE_CONFIG' diff flag when
submodules are requested to be ignored when checking for unstaged
changes.
Reported-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/resolve-ref-optional-result:
refs: pass NULL to resolve_refdup() if hash is not needed
refs: pass NULL to refs_resolve_refdup() if hash is not needed
This allows us to get rid of several write-only variables.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation of the cut-line in the commit log editor has been
slightly tweaked.
* ks/commit-do-not-touch-cut-line:
commit-template: change a message to be more intuitive
It's not good to use the phrase 'do not touch' to convey the
information that the cut-line should not be modified or removed as
it could possibly be mis-interpreted by a person who doesn't know
that the word 'touch' has the meaning of 'tamper with'. Further, it
could make translations a little difficult as it might not have the
intended meaning in a few languages when translated as such.
So, use more intuitive terms in the sentence.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If format_tracking_info() returns 0, then it didn't touch its strbuf
parameter, so it's OK to exit early in that case. Clean up sb in the
other case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Store the pointer to the string allocated by shorten_unambiguous_ref in
a dedicated variable, short_base, and keep base unchanged. A non-const
variable is more appropriate for such an object. It avoids having to
cast const away on free and stops redefining the meaning of base, making
the code slightly clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has long shown essentially the same message as "git
commit"; the message it gives while preparing for the root commit,
i.e. "Initial commit", was hard to understand for some new users.
Now it says "No commits yet" to stress more on the current status
(rather than the commit the user is preparing for, which is more in
line with the focus of "git commit").
* ks/status-initial-commit:
status: contextually notify user about an initial commit
The existing message, "Initial commit", makes sense for the commit template
notifying users that it's their initial commit, but is confusing when
merely checking the status of a fresh repository (or orphan branch)
without having any commits yet.
Change the output of "status" to say "No commits yet" when "git
status" is run on a fresh repo (or orphan branch), while retaining the
current "Initial commit" message displayed in the template that's
displayed in the editor when the initial commit is being authored.
Correspondingly change the output of "short status" to "No commits yet
on " when "git status -sb" is run on a fresh repo (or orphan branch).
A few alternatives considered were,
* Waiting for initial commit
* Your current branch does not have any commits
* Current branch waiting for initial commit
The most succint one among the alternatives was chosen.
[with help on tests from Ævar]
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce '--show-stash' and its configuration option 'status.showStash'
to allow git-status to show information about currently stashed entries.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
"git interpret-trailers", when used as GIT_EDITOR for "git commit
-v", looked for and appended to a trailer block at the very end,
i.e. at the end of the "diff" output. The command has been
corrected to pay attention to the cut-mark line "commit -v" adds to
the buffer---the real trailer block should appear just before it.
* bm/interpret-trailers-cut-line-is-eom:
interpret-trailers: honor the cut line
"git interpret-trailers", when used as GIT_EDITOR for "git commit
-v", looked for and appended to a trailer block at the very end,
i.e. at the end of the "diff" output. The command has been
corrected to pay attention to the cut-mark line "commit -v" adds to
the buffer---the real trailer block should appear just before it.
* bm/interpret-trailers-cut-line-is-eom:
interpret-trailers: honor the cut line
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
API update.
* bw/dir-c-stops-relying-on-the-index:
dir: convert fill_directory to take an index
dir: convert read_directory to take an index
dir: convert read_directory_recursive to take an index
dir: convert open_cached_dir to take an index
dir: convert is_excluded to take an index
dir: convert prep_exclude to take an index
dir: convert add_excludes to take an index
dir: convert is_excluded_from_list to take an index
dir: convert last_exclude_matching_from_list to take an index
dir: convert dir_add* to take an index
dir: convert get_dtype to take index
dir: convert directory_exists_in_index to take index
dir: convert read_skip_worktree_file_from_index to take an index
dir: stop using the index compatibility macros
When fopen() returns NULL, it could be because the given path does not
exist, but it could also be some other errors and the caller has to
check. Add a wrapper so we don't have to repeat the same error check
everywhere.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function did a whole lot of unnecessary work, such as reading in
four files just to figure out that, oh, hey, we do not need to look at
them after all because the HEAD is not detached.
Simplify the entire function to return early when possible, to read in
the files only when necessary, and to release the allocated memory
always (there was a leak, reported via Coverity, where we failed to
release the allocated strings if the HEAD is not detached).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-status shows tracking data for the current branch
in the long format, we try to end the stanza with a blank
line. When status.displayCommentPrefix is true, we call
color_fprintf_ln() to do so. But when it's false, we call
the enigmatic:
fputs("", s->fp);
which does nothing at all! This is a bug from 7d7d68022
(silence a bunch of format-zero-length warnings,
2014-05-04). Prior to that, we called fprintf_ln() with an
empty string. Switching to fputs() meant we needed to
include the "newline in the string, but we didn't.
So you see:
On branch jk/status-tracking-newline
Your branch is ahead of 'origin/master' by 1 commit.
Changes not staged for commit:
modified: foo
Untracked files:
bar
whereas there should be a blank line before the "Changes not
staged" line.
The fix itself is a one-liner. But we never noticed this
bug because t7508 doesn't exercise the ahead/behind code at
all. So let's configure an upstream during the initial
setup, which means that the code will be exercised as part
of all of the various invocations in that script. This makes
the diff rather noisy, but should give us good coverage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If I add an untracked file to a submodule or modify a tracked file,
currently "git status --short" treats the change in the same way as
changes to the current HEAD of the submodule:
$ git clone --quiet --recurse-submodules https://gerrit.googlesource.com/gerrit
$ echo hello >gerrit/plugins/replication/stray-file
$ sed -i -e 's/.*//' gerrit/plugins/replication/.mailmap
$ git -C gerrit status --short
M plugins/replication
This is by analogy with ordinary files, where "M" represents a change
that has not been added yet to the index. But this change cannot be
added to the index without entering the submodule, "git add"-ing it,
and running "git commit", so the analogy is counterproductive.
Introduce new status letters " ?" and " m" for this. These are similar
to the existing "??" and " M" but mean that the submodule (not the
parent project) has new untracked files and modified files, respectively.
The user can use "git add" and "git commit" from within the submodule to
add them.
Changes to the submodule's HEAD commit can be recorded in the index with
a plain "git add -u" and are shown with " M", like today.
To avoid excessive clutter, show at most one of " ?", " m", and " M" for
the submodule. They represent increasing levels of change --- the last
one that applies is shown (e.g., " m" if there are both modified files
and untracked files in the submodule, or " M" if the submodule's HEAD
has been modified and it has untracked files).
While making these changes, we need to make sure to not break porcelain
level 1, which shares code with "status --short". We only change
"git status --short".
Non-short "git status" and "git status --porcelain=2" already handle
these cases by showing more detail:
$ git -C gerrit status --porcelain=2
1 .M S.MU 160000 160000 160000 305c864db28eb0c77c8499bc04c87de3f849cf3c 305c864db28eb0c77c8499bc04c87de3f849cf3c plugins/replication
$ git -C gerrit status
[...]
modified: plugins/replication (modified content, untracked content)
Scripts caring about these distinctions should use --porcelain=2.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --porcelain" is supposed to give a stable output, but a
few strings were left as translatable by mistake.
* mg/status-porcelain-no-i18n:
git-status: make porcelain more robust
Improve readability by using the for_each_string_list_item helper
instead of manually iterating with an integer counter.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git status provides a porcelain mode for porcelain writers with a
supposedly stable (plumbing) interface.
7a76c28ff2 ("status: disable translation when --porcelain is used", 2014-03-20)
made sure that ahead/behind info is not translated (i.e. is stable).
Make sure that the remaining two strings (initial commit, detached head)
are stable, too.
These changes are for the v1 porcelain interface. While we do have a perfectly
stable v2 porcelain interface now, some tools (such as
powerline-gitstatus) are written against v1 and profit from fixing v1
without any changes on their side.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the remaining uses of unsigned char [20] to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make each_reflog_ent_fn take two struct object_id pointers instead of
two pointers to unsigned char. Convert the various callbacks to use
struct object_id as well. Also, rename fsck_handle_reflog_sha1 to
fsck_handle_reflog_oid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few leaf functions in various files that call
resolve_refdup. Convert these functions to use struct object_id
internally to prepare for transitioning resolve_refdup itself.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"uchar [40]" to "struct object_id" conversion continues.
* rs/object-id:
checkout: convert post_checkout_hook() to struct object_id
use oidcpy() for copying hashes between instances of struct object_id
use oid_to_hex_r() for converting struct object_id hashes to hex strings
After starting "git rebase -i", which first opens the user's editor
to edit the series of patches to apply, but before saving the
contents of that file, "git status" failed to show the current
state (i.e. you are in an interactive rebase session, but you have
applied no steps yet) correctly.
* js/status-pre-rebase-i:
status: be prepared for not-yet-started interactive rebase
Patch generated by Coccinelle and contrib/coccinelle/object_id.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some developers might want to call `git status` in a working
directory where they just started an interactive rebase, but the
edit script is still opened in the editor.
Let's show a meaningful message in such cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The require_clean_work_tree() function calls hold_locked_index()
with die_on_error=0 to signal that it is OK if it fails to obtain
the lock, but unconditionally calls update_index_if_able(), which
will try to write into fd=-1.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When new paths were added by "git add -N" to the index, it was
enough to circumvent the check by "git commit" to refrain from
making an empty commit without "--allow-empty". The same logic
prevented "git status" to show such a path as "new file" in the
"Changes not staged for commit" section.
* nd/ita-empty-commit:
commit: don't be fooled by ita entries when creating initial commit
commit: fix empty commit creation when there's no changes but ita entries
diff: add --ita-[in]visible-in-index
diff-lib: allow ita entries treated as "not yet exist in index"
The require_clean_work_tree() helper was recreated in C when "git
pull" was rewritten from shell; the helper is now made available to
other callers in preparation for upcoming "rebase -i" work.
* js/libify-require-clean-work-tree:
wt-status: begin error messages with lower-case
wt-status: teach has_{unstaged,uncommitted}_changes() about submodules
wt-status: export also the has_un{staged,committed}_changes() functions
wt-status: make the require_clean_work_tree() function reusable
pull: make code more similar to the shell script again
pull: drop confusing prefix parameter of die_on_unclean_work_tree()
When comparing the index and the working tree to show which paths are
new, and comparing the tree recorded in the HEAD and the index to see if
committing the contents recorded in the index would result in an empty
commit, we would want the former comparison to say "these are new paths"
and the latter to say "there is no change" for paths that are marked as
intent-to-add.
We made a similar attempt at d95d728a ("diff-lib.c: adjust position of
i-t-a entries in diff", 2015-03-16), which redefined the semantics of
these two comparison modes globally, which was a disaster and had to be
reverted at 78cc1a54 ("Revert "diff-lib.c: adjust position of i-t-a
entries in diff"", 2015-06-23).
To make sure we do not repeat the same mistake, introduce a new internal
diffopt option so that this different semantics can be asked for only by
callers that ask it, while making sure other unaudited callers will get
the same comparison result.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter in most cases and a bit more efficient.
The changes here are not easily handled by a semantic patch because
they involve removing temporary variables and deconstructing format
strings for strbuf_addf().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code still followed the old git-pull.sh code which did not
adhere to our new convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes we are *actually* interested in those changes... For
example when an interactive rebase wants to continue with a staged
submodule update.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They will be used in the upcoming rebase helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function used by "git pull" to stop the user when the working
tree has changes is useful in other places.
Let's move it into a more prominent (and into an actually reusable)
spot: wt-status.[ch].
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
