When "git checkout", "git merge", etc. manipulates the in-core
index, various pieces of information in the index extensions are
discarded from the original state, as it is usually not the case
that they are kept up-to-date and in-sync with the operation on the
main index. The untracked cache extension is copied across these
operations now, which would speed up "git status" (as long as the
cache is properly invalidated).
* dt/unpack-save-untracked-cache-extension:
unpack-trees: preserve index extensions
API update.
* bw/dir-c-stops-relying-on-the-index:
dir: convert fill_directory to take an index
dir: convert read_directory to take an index
dir: convert read_directory_recursive to take an index
dir: convert open_cached_dir to take an index
dir: convert is_excluded to take an index
dir: convert prep_exclude to take an index
dir: convert add_excludes to take an index
dir: convert is_excluded_from_list to take an index
dir: convert last_exclude_matching_from_list to take an index
dir: convert dir_add* to take an index
dir: convert get_dtype to take index
dir: convert directory_exists_in_index to take index
dir: convert read_skip_worktree_file_from_index to take an index
dir: stop using the index compatibility macros
Make git checkout (and other unpack_tree operations) preserve the
untracked cache. This is valuable for two reasons:
1. Often, an unpack_tree operation will not touch large parts of the
working tree, and thus most of the untracked cache will continue to be
valid.
2. Even if the untracked cache were entirely invalidated by such an
operation, the user has signaled their intention to have such a cache,
and we don't want to throw it away.
[jes: backed out the watchman-specific parts]
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a 2- and 3-way merge of trees, more than one source trees often
end up sharing an identical subtree; optimize by not reading the
same tree multiple times in such a case.
* jh/unpack-trees-micro-optim:
unpack-trees: avoid duplicate ODB lookups during checkout
In case of a non-forced worktree update, the submodule movement is tested
in a dry run first, such that it doesn't matter if the actual update is
done via the force flag. However for correctness, we want to give the
flag as specified by the user. All callers have been inspected and updated
if needed.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach traverse_trees_recursive() to not do redundant ODB
lookups when both directories refer to the same OID.
In operations such as read-tree and checkout, there will
likely be many peer directories that have the same OID when
the differences between the commits are relatively small.
In these cases we can avoid hitting the ODB multiple times
for the same OID.
This patch handles n=2 and n=3 cases and simply copies the
data rather than repeating the fill_tree_descriptor().
================
On the Windows repo (500K trees, 3.1M files, 450MB index),
this reduced the overall time by 0.75 seconds when cycling
between 2 commits with a single file difference.
(avg) before: 22.699
(avg) after: 21.955
===============
================
On Linux using p0006-read-tree-checkout.sh with linux.git:
Test HEAD^ HEAD
-------------------------------------------------------------------------------------------------------
0006.2: read-tree br_base br_ballast (57994) 0.24(0.20+0.03) 0.24(0.22+0.01) +0.0%
0006.3: switch between br_base br_ballast (57994) 10.58(6.23+2.86) 10.67(5.94+2.87) +0.9%
0006.4: switch between br_ballast br_ballast_plus_1 (57994) 0.60(0.44+0.17) 0.57(0.44+0.14) -5.0%
0006.5: switch between aliases (57994) 0.59(0.48+0.13) 0.57(0.44+0.15) -3.4%
================
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the place holder in the error message is for multiple submodules,
we don't want to encapsulate the string place holder in single quotes.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we'll support submodule entries to be
in sync with the tree in working tree changing commands,
such as checkout or read-tree.
When a new submodule entry changes in the tree, we need to
check if there are conflicts (directory/file conflicts)
for the tree. Add this check for submodules to be
performed before the working tree is touched.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check (which uses the old oid) is yet to be implemented, but this part
is just a refactor, so it can go separately first.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree" and its underlying unpack_trees() machinery learned
to report problematic paths prefixed with the --super-prefix option.
* sb/unpack-trees-super-prefix:
unpack-trees: support super-prefix option
t1001: modernize style
t1000: modernize style
read-tree: use OPT_BOOL instead of OPT_SET_INT
In the future we want to support working tree operations within submodules,
e.g. "git checkout --recurse-submodules", which will update the submodule
to the commit as recorded in its superproject. In the submodule the
unpack-tree operation is carried out as usual, but the reporting to the
user needs to prefix any path with the superproject. The mechanism for
this is the super-prefix. (see 74866d757, git: make super-prefix option)
Add support for the super-prefix option for commands that unpack trees
by wrapping any path output in unpacking trees in the newly introduced
super_prefixed function. This new function prefixes any path with the
super-prefix if there is one. Assuming the submodule case doesn't happen
in the majority of the cases, we'd want to have a fast behavior for no
super prefix, i.e. no reallocation/copying, but just returning path.
Another aspect of introducing the `super_prefixed` function is to consider
who owns the memory and if this is the right place where the path gets
modified. As the super prefix ought to change the output behavior only and
not the actual unpack tree part, it is fine to be that late in the line.
As we get passed in 'const char *path', we cannot change the path itself,
which means in case of a super prefix we have to copy over the path.
We need two static buffers in that function as the error messages
contain at most two paths.
For testing purposes enable it in read-tree, which has no output
of paths other than an unpack-trees.c. These are all converted in
this patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes check_updates shorter and easier to understand.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The continue is the last statement in the loop, so not needed.
This situation arose in 700e66d66 (2010-07-30, unpack-trees: let
read-tree -u remove index entries outside sparse area) when statements
after the continue were removed.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The checkout state was introduced via 16da134b1f
(read-trees: refactor the unpack_trees() part, 2006-07-30). An attempt to
refactor the checkout state was done in b56aa5b268 (unpack-trees: pass
checkout state explicitly to check_updates(), 2016-09-13), but we can
go even further.
The `struct checkout state` is not used in unpack_trees apart from
initializing it, so move it into the function that makes use of it,
which is `check_updates`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: David Turner <dturner@twosigma.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a static initializer for struct checkout and use it throughout the
code base. It's shorter, avoids a memset(3) call and makes sure the
base_dir member is initialized to a valid (empty) string.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
Add a parameter for the struct checkout variable to check_updates()
instead of using a static global variable. Passing it explicitly makes
object ownership and usage more easily apparent. And we get rid of a
static variable; those can be problematic in library-like code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
Mark several messages for translation.
* va/i18n-misc-updates:
i18n: unpack-trees: avoid substituting only a verb in sentences
i18n: builtin/pull.c: split strings marked for translation
i18n: builtin/pull.c: mark placeholders for translation
i18n: git-parse-remote.sh: mark strings for translation
i18n: branch: move comment for translators
i18n: branch: unmark string for translation
i18n: builtin/rm.c: remove a comma ',' from string
i18n: unpack-trees: mark strings for translation
i18n: builtin/branch.c: mark option for translation
i18n: index-pack: use plural string instead of normal one
Instead of reusing the same set of message templates for checkout
and other actions and substituting the verb with "%s", prepare
separate message templates for each known action. That would make
it easier for translation into languages where the same verb may
conjugate differently depending on the message we are giving.
See gettext documentation for details:
http://www.gnu.org/software/gettext/manual/html_node/Preparing-Strings.html
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings seen by the user inside setup_unpack_trees_porcelain() and
display_error_msgs() functions for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While unpacking trees (e.g. during git checkout), when we hit a cache
entry that's past and outside our path, we cut off iteration.
This provides about a 45% speedup on git checkout between master and
master^20000 on Twitter's monorepo. Speedup in general will depend on
repostitory structure, number of changes, and packfile packing
decisions.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In traverse_trees, we generate the complete traverse path for a
traverse_info. Later, in do_compare_entry, we used to go do a bunch
of work to compare the traverse_info to a cache_entry's name without
computing that path. But since we already have that path, we don't
need to do all that work. Instead, we can just put the generated
path into the traverse_info, and do the comparison more directly.
We copy the path because prune_traversal might mutate `base`. This
doesn't happen in any codepaths where do_compare_entry is called,
but it's better to be safe.
This makes git checkout much faster -- about 25% on Twitter's
monorepo. Deeper directory trees are likely to benefit more than
shallower ones.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common pattern to do:
foo = xmalloc(strlen(one) + strlen(two) + 1 + 1);
sprintf(foo, "%s %s", one, two);
(or possibly some variant with strcpy()s or a more
complicated length computation). We can switch these to use
xstrfmt, which is shorter, involves less error-prone manual
computation, and removes many sprintf and strcpy calls which
make it harder to audit the code for real buffer overflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack-trees wants to know whether a path will
overwrite anything in the working tree, we use lstat() to
see if there is anything there. But if we are going to write
"foo/bar", we can't just lstat("foo/bar"); we need to look
for leading prefixes (e.g., "foo"). So we use the lstat cache
to find the length of the leading prefix, and copy the
filename up to that length into a temporary buffer (since
the original name is const, we cannot just stick a NUL in
it).
The copy we make goes into a PATH_MAX-sized buffer, which
will overflow if the prefix is longer than PATH_MAX. How
this happens is a little tricky, since in theory PATH_MAX is
the biggest path we will have read from the filesystem. But
this can happen if:
- the compiled-in PATH_MAX does not accurately reflect
what the filesystem is capable of
- the leading prefix is not _quite_ what is on disk; it
contains the next element from the name we are checking.
So if we want to write "aaa/bbb/ccc/ddd" and "aaa/bbb"
exists, the prefix of interest is "aaa/bbb/ccc". If
"aaa/bbb" approaches PATH_MAX, then "ccc" can overflow
it.
So this can be triggered, but it's hard to do. In
particular, you cannot just "git clone" a bogus repo. The
verify_absent checks happen before unpack-trees writes
anything to the filesystem, so there are never any leading
prefixes during the initial checkout, and the bug doesn't
trigger. And by definition, these files are larger than
PATH_MAX, so writing them will fail, and clone will
complain (though it may write a partial path, which will
cause a subsequent "git checkout" to hit the bug).
We can fix it by creating the temporary path on the heap.
The extra malloc overhead is not important, as we are
already making at least one stat() call (and probably more
for the prefix discovery).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
"sparse checkout" misbehaved for a path that is excluded from the
checkout when switching between branches that differ at the path.
* as/sparse-checkout-removal:
unpack-trees: don't update files with CE_WT_REMOVE set
The code to perform multi-tree merges has been taught to repopulate
the cache-tree upon a successful merge into the index, so that
subsequent "diff-index --cached" (hence "status") and "write-tree"
(hence "commit") will go faster.
The same logic in "git checkout" may now be removed, but that is a
separate issue.
* dt/unpack-trees-cache-tree-revalidate:
unpack-trees: populate cache-tree on successful merge
Because git_path uses a static buffer that is shared with
calls to git_path, mkpath, etc, it can be dangerous to
assign the result to a variable or pass it to a non-trivial
function. The value may change unexpectedly due to other
calls.
None of the cases changed here has a known bug, but they're
worth converting away from git_path because:
1. It's easy to use git_pathdup in these cases.
2. They use constructs (like assignment) that make it
hard to tell whether they're safe or not.
The extra malloc overhead should be trivial, as an
allocation should be an order of magnitude cheaper than a
system call (which we are clearly about to make, since we
are constructing a filename). The real cost is that we must
remember to free the result.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"sparse checkout" misbehaved for a path that is excluded from the
checkout when switching between branches that differ at the path.
* as/sparse-checkout-removal:
unpack-trees: don't update files with CE_WT_REMOVE set
When we unpack trees into an existing index, we discard the old
index and replace it with the new, merged index. Ensure that this
index has its cache-tree populated. This will make subsequent git
status and commit commands faster.
Signed-off-by: Brian Degenhardt <bmd@bmdhacks.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't update files in the worktree from cache entries which are
flagged with CE_WT_REMOVE.
When a user does a sparse checkout, git removes files that are
marked with CE_WT_REMOVE (because they are out-of-scope for the
sparse checkout). If those files are also marked CE_UPDATE (for
instance, because they differ in the branch that is being checked
out and the outgoing branch), git would previously recreate them.
This patch prevents them from being recreated.
These erroneously-created files would also interfere with merges,
causing pre-merge revisions of out-of-scope files to appear in the
worktree.
apply_sparse_checkout() is the function where all "action"
manipulation (add, delete, update files..) for sparse checkout
occurs; it should not ask to delete and update both at the same
time.
Signed-off-by: Anatole Shaw <git-devel@omni.poc.net>
Signed-off-by: David Turner <dturner@twopensource.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally we should implement untracked_cache_remove_from_index() and
untracked_cache_add_to_index() so that they update untracked cache
right away instead of invalidating it and wait for read_directory()
next time to deal with it. But that may need some more work in
unpack-trees.c. So stay simple as the first step.
The new call in add_index_entry_with_check() may look strange because
new calls usually stay close to cache_tree_invalidate_path(). We do it
a bit later than c_t_i_p() in this function because if it's about
replacing the entry with the same name, we don't care (but cache-tree
does).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack_trees tries to write an entry to the index,
add_index_entry may report an error to stderr, but we ignore
its return value. This leads to us returning a successful
exit code for an operation that partially failed. Let's make
sure to propagate this code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the time the caller specifies to which destination variable
the resulting index_state should be assigned by passing a non-NULL
pointer in o->dst_index to receive that state, but for a caller that
gives a NULL o->dst_index, the resulting index simply leaked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/unpack-trees-checkout-m-carry-deletion:
checkout -m: attempt merge when deletion of path was staged
unpack-trees: use 'cuddled' style for if-else cascade
unpack-trees: simplify 'all other failures' case
"git checkout -m" did not switch to another branch while carrying
the local changes forward when a path was deleted from the index.
* jn/unpack-trees-checkout-m-carry-deletion:
checkout -m: attempt merge when deletion of path was staged
unpack-trees: use 'cuddled' style for if-else cascade
unpack-trees: simplify 'all other failures' case
twoway_merge() is missing an o->gently check in the case where a file
that needs to be modified is missing from the index but present in the
old and new trees. As a result, in this case 'git checkout -m' errors
out instead of trying to perform a merge.
Fix it by checking o->gently. While at it, inline the o->gently check
into reject_merge to prevent future call sites from making the same
mistake.
Noticed by code inspection. The test for the motivating case was
added by JC.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the predominant style in git by following K&R style for if/else
cascades. Documentation/CodingStyle from linux.git explains:
Note that the closing brace is empty on a line of its own, _except_ in
the cases where it is followed by a continuation of the same statement,
ie a "while" in a do-statement or an "else" in an if-statement, like
this:
if (x == y) {
..
} else if (x > y) {
...
} else {
....
}
Rationale: K&R.
Also, note that this brace-placement also minimizes the number of empty
(or almost empty) lines, without any loss of readability.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 'if (current)' block of twoway_merge, we handle the boring
errors by checking if the entry from the old tree, current index, and
new tree are present, to get a pathname for the error message from one
of them:
if (oldtree)
return o->gently ? -1 : reject_merge(oldtree, o);
if (current)
return o->gently ? -1 : reject_merge(current, o);
if (newtree)
return o->gently ? -1 : reject_merge(newtree, o);
return -1;
Since this is guarded by 'if (current)', the second test is guaranteed
to succeed. Moreover, any of the three entries, if present, would
have the same path because there is no rename detection in this code
path. Even if some day in the future the entries' paths differ, the
'current' path used in the index and worktree would presumably be the
most recognizable for the end user.
Simplify by just using 'current'.
Noticed by coverity, Id:290002
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
* jk/xstrfmt:
setup_git_env(): introduce git_path_from_env() helper
unique_path: fix unlikely heap overflow
walker_fetch: fix minor memory leak
merge: use argv_array when spawning merge strategy
sequencer: use argv_array_pushf
setup_git_env: use git_pathdup instead of xmalloc + sprintf
use xstrfmt to replace xmalloc + strcpy/strcat
use xstrfmt to replace xmalloc + sprintf
use xstrdup instead of xmalloc + strcpy
use xstrfmt in favor of manual size calculations
strbuf: add xstrfmt helper
We often represent our strings as a counted string, i.e. a pair of
the pointer to the beginning of the string and its length, and the
string may not be NUL terminated to that length.
To compare a pair of such counted strings, unpack-trees.c and
read-cache.c implement their own name_compare() functions
identically. In addition, the cache_name_compare() function in
read-cache.c is nearly identical. The only difference is when one
string is the prefix of the other string, in which case
name_compare() returns -1/+1 to show which one is longer, and
cache_name_compare() returns the difference of the lengths to show
the same information.
Unify these three functions by using the implementation from
cache_name_compare(). This does not make any difference to the
existing and future callers, as they must be paying attention only
to the sign of the returned value (and not the magnitude) because
the original implementations of these two functions return values
returned by memcmp(3) when the one string is not a prefix of the
other string, and the only thing memcmp(3) guarantees its callers is
the sign of the returned value, not the magnitude.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many parts of the code, we do an ugly and error-prone
malloc like:
const char *fmt = "something %s";
buf = xmalloc(strlen(foo) + 10 + 1);
sprintf(buf, fmt, foo);
This makes the code brittle, and if we ever get the
allocation wrong, is a potential heap overflow. Let's
instead favor xstrfmt, which handles the allocation
automatically, and makes the code shorter and more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The large part of this patch just follows CE_ENTRY_CHANGED
marks. replace_index_entry() is updated to update
split_index->base->cache[] as well so base->cache[] does not reference
to a freed entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This split-index mode is designed to keep write cost proportional to
the number of changes the user has made, not the size of the work
tree. (Read cost is another matter, to be dealt separately.)
This mode stores index info in a pair of $GIT_DIR/index and
$GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over
time while "index" is smaller and updated often. Format details are in
index-format.txt, although not everything is implemented in this
patch.
Shared indexes are not automatically removed, because it's unclear if
the shared index is needed by any (even temporary) indexes by just
looking at it. After a while you'll collect stale shared indexes. The
good news is one shared index is useable for long, until
$GIT_DIR/index becomes too big and sluggish that the new shared index
must be created.
The safest way to clean shared indexes is to turn off split index
mode, so shared files are all garbage, delete them all, then turn on
split index mode again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also update SHA-1 after writing. If we do not do that, the second
read_index() will see "initialized" variable already set and not read
.git/index again, which is fine, except istate->sha1 now has a stale
value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other fill_stat_cache_info() is on new entries, which should set
CE_ENTRY_ADDED in cache_changed, so we're safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improvements to our hash table to get it to meet the needs of the
msysgit fscache project, with some nice performance improvements.
* kb/fast-hashmap:
name-hash: retire unused index_name_exists()
hashmap.h: use 'unsigned int' for hash-codes everywhere
test-hashmap.c: drop unnecessary #includes
.gitignore: test-hashmap is a generated file
read-cache.c: fix memory leaks caused by removed cache entries
builtin/update-index.c: cleanup update_one
fix 'git update-index --verbose --again' output
remove old hash.[ch] implementation
name-hash.c: remove cache entries instead of marking them CE_UNHASHED
name-hash.c: use new hash map implementation for cache entries
name-hash.c: remove unreferenced directory entries
name-hash.c: use new hash map implementation for directories
diffcore-rename.c: use new hash map implementation
diffcore-rename.c: simplify finding exact renames
diffcore-rename.c: move code around to prepare for the next patch
buitin/describe.c: use new hash map implementation
add a hashtable implementation that supports O(1) removal
submodule: don't access the .gitmodules cache entry after removing it
"git am --abort" sometimes complained about not being able to write
a tree with an 0{40} object in it.
* jk/two-way-merge-corner-case-fix:
t1005: add test for "read-tree --reset -u A B"
t1005: reindent
unpack-trees: fix "read-tree -u --reset A B" with conflicted index
Some buffers created with PATH_MAX length are not checked when being
written, and can overflow if PATH_MAX is not big enough to hold the
path.
Replace those buffers by strbufs so that their size is automatically
grown if necessary. They are created as static local variables to avoid
reallocating memory on each call. Note that prefix_filename() returns
this static buffer so each callers should copy or use the string
immediately (this is currently true).
Reported-by: Wataru Noguchi <wnoguchi.0727@gmail.com>
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a rather longstanding corner-case bug in twoway "reset to
there" merge, which is most often seen in "git am --abort".
* jk/two-way-merge-corner-case-fix:
t1005: add test for "read-tree --reset -u A B"
t1005: reindent
unpack-trees: fix "read-tree -u --reset A B" with conflicted index
The new hashmap implementation supports remove, so really remove unused
cache entries from the name hashmap instead of just marking them.
The CE_UNHASHED flag and CE_STATE_MASK are no longer needed.
Keep the CE_HASHED flag to prevent adding entries twice.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note: the "ce->next = NULL;" in unpack-trees.c::do_add_entry can safely be
removed, as ce->next (now ce->ent.next) is always properly initialized in
name-hash.c::hash_index_entry.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call "read-tree --reset -u HEAD ORIG_HEAD", the first thing we
do with the index is to call read_cache_unmerged. Originally that
would read the index, leaving aside any unmerged entries. However, as
of d1a43f2 (reset --hard/read-tree --reset -u: remove unmerged new
paths, 2008-10-15), it actually creates a new cache entry to serve as
a placeholder, so that we later know to update the working tree.
However, we later noticed that the sha1 of that unmerged entry was
just copied from some higher stage, leaving you with random content in
the index. That was fixed by e11d7b5 ("reset --merge": fix unmerged
case, 2009-12-31), which instead puts the null sha1 into the newly
created entry, and sets a CE_CONFLICTED flag. At the same time, it
teaches the unpack-trees machinery to pay attention to this flag, so
that oneway_merge throws away the current value.
However, it did not update the code paths for twoway_merge, which is
where we end up in the two-way read-tree with --reset. We notice that
the HEAD and ORIG_HEAD versions are the same, and say "oh, we can just
reuse the current version". But that's not true. The current version
is bogus.
Notice this case and make sure we do not keep the bogus entry; either
we do not have that path in the tree we are moving to (i.e. remove
it), or we want to have the cache entry we created for the tree we are
moving to (i.e. resolve by explicitly saying the "newtree" version is
what we want).
[jc: this is from the almost year-old $gmane/212316]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each caller of index_name_exists() knows whether it is looking for a
directory or a file, and can avoid the unnecessary indirection of
index_name_exists() by instead calling index_dir_exists() or
index_file_exists() directly.
Invoking the appropriate search function explicitly will allow a
subsequent patch to relieve callers of the artificial burden of having
to add a trailing '/' to the pathname given to index_dir_exists().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before overwriting the destination index, first let's discard its
contents.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Tested-by: Лежанкин Иван <abyss.7@gmail.com> wrote:
Reviewed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If o->merge is set, the struct traverse_info member conflicts is shifted
left in unpack_callback, then passed through traverse_trees_recursive
to unpack_nondirectories, where it is shifted right before use. Stop
the shifting and just pass the conflict bit mask as is. Rename the
member to df_conflicts to prove that it isn't used anywhere else.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge functions duplicate entries as needed and they don't free
them. Release them in unpack_nondirectories, the same function
where they were allocated, after we're done.
As suggested by Felipe, use the same loop style (zero-based for loop)
for freeing as for allocating.
Improved-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the type merge_fn_t to accept the array of cache_entry pointers
as const pointers to const pointers. This documents the fact that the
merge functions don't modify the cache_entry contents or replace any of
the pointers in the array.
Only a single cast is necessary in unpack_nondirectories because adding
two const modifiers at once is not allowed in C. The cast is safe in
that it doesn't mask any modfication; call_unpack_fn only needs the
array for reading.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add const to struct cache_entry pointers throughout the tree which are
only used for reading. This allows callers to pass in const pointers.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Duplicate the merge entry right away and work with that instead of
modifying the entry we got and duplicating it only at the end of
the function. Then mark that pointer const to document that we
don't modify the referenced cache_entry.
This change is safe because all existing merge functions call
merged_entry just before returning (or not at all), i.e. they don't
care about changes to the referenced cache_entry after the call.
unpack_nondirectories and unpack_index_entry, which call the merge
functions through call_unpack_fn, aren't interested in such changes
neither.
The change complicates merged_entry a bit because we have to free the
copy if we error out, but allows callers to pass a const pointer.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we're add it, mark the struct cache_entry pointer of add_entry
const because we only read from it and this allows callers to pass in
const pointers.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
Refactor and generally clean up the directory traversal API
implementation.
* as/dir-c-cleanup:
dir.c: rename free_excludes() to clear_exclude_list()
dir.c: refactor is_path_excluded()
dir.c: refactor is_excluded()
dir.c: refactor is_excluded_from_list()
dir.c: rename excluded() to is_excluded()
dir.c: rename excluded_from_list() to is_excluded_from_list()
dir.c: rename path_excluded() to is_path_excluded()
dir.c: rename cryptic 'which' variable to more consistent name
Improve documentation and comments regarding directory traversal API
api-directory-listing.txt: update to match code
Previously each exclude_list could potentially contain patterns
from multiple sources. For example dir->exclude_list[EXC_FILE]
would typically contain patterns from .git/info/exclude and
core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain
patterns from multiple per-directory .gitignore files during
directory traversal (i.e. when dir->exclude_stack was more than
one item deep).
We split these composite exclude_lists up into three groups of
exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each
exclude_list now contains patterns from a single source. This will
allow us to cleanly track the origin of each pattern simply by adding
a src field to struct exclude_list, rather than to struct exclude,
which would make memory management of the source string tricky in the
EXC_DIRS case where its contents are dynamically generated.
Similarly, by moving the filebuf member from struct exclude_stack to
struct exclude_list, it allows us to track and subsequently free
memory buffers allocated during the parsing of all exclude files,
rather than only tracking buffers allocated for files in the EXC_DIRS
group.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is clearer to use a 'clear_' prefix for functions which empty
and deallocate the contents of a data structure without freeing
the structure itself, and a 'free_' prefix for functions which
also free the structure itself.
http://article.gmane.org/gmane.comp.version-control.git/206128
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was discussed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Also adjust their callers as necessary.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was agreed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the subject line of 613f027 (read-tree -u one-way merge fix
to check out locally modified paths., 2006-05-15) mentions "read-tree
-u", it did not seem to check whether -u was in effect. Not checking
whether -u is in effect makes e.g. "read-tree --reset" lstat() the
worktree, even though the worktree stat should not matter for that
operation.
This speeds up e.g. "git reset" a little on the linux-2.6 repo (best
of five, warm cache):
Before After
real 0m0.288s 0m0.233s
user 0m0.190s 0m0.150s
sys 0m0.090s 0m0.080s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split lower bits of ce_flags field and creates a new ce_namelen
field in the in-core index structure.
* tg/ce-namelen-field:
Strip namelen out of ce_flags into a ce_namelen field
"git ls-files --exclude=t -i" did not consider anything under t/ as
excluded, as it did not pay attention to exclusion of leading paths
while walking the index. Other two users of excluded() are also
updated.
* jc/ls-files-i-dir:
dir.c: make excluded() file scope static
unpack-trees.c: use path_excluded() in check_ok_to_remove()
builtin/add.c: use path_excluded()
path_excluded(): update API to less cache-entry centric
ls-files -i: micro-optimize path_excluded()
ls-files -i: pay attention to exclusion of leading paths
Strip the name length from the ce_flags field and move it
into its own ce_namelen field in struct cache_entry. This
will both give us a tiny bit of a performance enhancement
when working with long pathnames and is a refactoring for
more readability of the code.
It enhances readability, by making it more clear what
is a flag, and where the length is stored and make it clear
which functions use stages in comparisions and which only
use the length.
It also makes CE_NAMEMASK private, so that users don't
mistakenly write the name length in the flags.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace strlen(ce->name) with ce_namelen() in a couple
of places which gives us some additional bits of
performance.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files --exclude=t -i" did not consider anything under t/
as excluded, as it did not pay attention to exclusion of leading
paths while walking the index. Other two users of excluded() are
also updated.
* jc/ls-files-i-dir:
dir.c: make excluded() file scope static
unpack-trees.c: use path_excluded() in check_ok_to_remove()
builtin/add.c: use path_excluded()
path_excluded(): update API to less cache-entry centric
ls-files -i: micro-optimize path_excluded()
ls-files -i: pay attention to exclusion of leading paths
This function is responsible for determining if a path that is not
tracked is ignored and allow "checkout" to overwrite it as needed.
It used excluded() without checking if higher level directory in the
path is ignored; correct it to use path_excluded() for this check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
* There are uses of lower-level interface excluded_from_list() in
the codepath for narrow-checkout hack; they are supposed to be
already checking each level as they descend, and are not touched
with this patch.
By Jens Lehmann (1) and Johannes Sixt (1)
* maint:
Consistently use "superproject" instead of "supermodule"
t3404: begin "exchange commits with -p" test with correct preconditions
We fairly consistently say "superproject" and never "supermodule" these
days. But there are seven occurrences of "supermodule" left in the current
work tree. Three appear in Release Notes for 1.5.3 and 1.7.7, three in
test names and one in a C-code comment.
Replace all occurrences of "supermodule" outside of the Release Notes
(which shouldn't be changed after the fact) with "superproject" for
consistency.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many error/warning messages had extra trailing newlines that are
unnecessary.
By Pete Wyckoff
* pw/message-cleanup:
remove blank filename in error message
remove superfluous newlines in error messages
Trivially shrinks the on-disk size of the index file to save both I/O and
checksum overhead.
The topic should give a solid base to build on further updates, with the
code refactoring in its earlier parts, and the backward compatibility
mechanism in its later parts.
* jc/index-v4:
index-v4: document the entry format
unpack-trees: preserve the index file version of original
update-index: upgrade/downgrade on-disk index version
read-cache.c: write prefix-compressed names in the index
read-cache.c: read prefix-compressed names in index on-disk version v4
read-cache.c: move code to copy incore to ondisk cache to a helper function
read-cache.c: move code to copy ondisk to incore cache to a helper function
read-cache.c: report the header version we do not understand
read-cache.c: make create_from_disk() report number of bytes it consumed
read-cache.c: allow unaligned mapping of the index file
cache.h: hide on-disk index details
varint: make it available outside the context of pack
The error handling routines add a newline. Remove
the duplicate ones in error messages.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise "git checkout $other_branch" (or even "git checkout HEAD")
would end up writing the index out in the default format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The allocations made by unpack_nondirectories() using create_ce_entry()
are never freed.
In the non-merge case, we duplicate them using add_entry() and later
only look at the first allocated element (src[0]), perhaps even only
by mistake. Split out the actual addition from add_entry() into the
new helper do_add_entry() and call this non-duplicating function
instead of add_entry() to avoid the leak.
Valgrind reports this for the command "git archive v1.7.9" without
the patch:
==13372== LEAK SUMMARY:
==13372== definitely lost: 230,986 bytes in 2,325 blocks
==13372== indirectly lost: 0 bytes in 0 blocks
==13372== possibly lost: 98 bytes in 1 blocks
==13372== still reachable: 2,259,198 bytes in 3,243 blocks
==13372== suppressed: 0 bytes in 0 blocks
And with the patch applied:
==13375== LEAK SUMMARY:
==13375== definitely lost: 65 bytes in 1 blocks
==13375== indirectly lost: 0 bytes in 0 blocks
==13375== possibly lost: 0 bytes in 0 blocks
==13375== still reachable: 2,364,417 bytes in 3,245 blocks
==13375== suppressed: 0 bytes in 0 blocks
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
src[0] points to the index entry in the merge case and to the first
tree to unpack in the non-merge case. We only want to mark the index
entry, so check first if we're merging.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree_entry_len() does not simply take two random arguments and return
a tree length. The two pointers must point to a tree item structure,
or struct name_entry. Passing random pointers will return incorrect
value.
Force callers to pass struct name_entry instead of two pointers (with
hope that they don't manually construct struct name_entry themselves)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/maint-sparse-errors:
Add explanation why we do not allow to sparse checkout to empty working tree
sparse checkout: show error messages when worktree shaping fails
* mg/maint-doc-sparse-checkout:
git-read-tree.txt: correct sparse-checkout and skip-worktree description
git-read-tree.txt: language and typography fixes
unpack-trees: print "Aborting" to stderr
* jc/diff-index-unpack:
diff-index: pass pathspec down to unpack-trees machinery
unpack-trees: allow pruning with pathspec
traverse_trees(): allow pruning with pathspec
verify_* functions can queue errors up and to be printed later at
label return_failed. In case of errors, do not go to label "done"
directly because all queued messages would be dropped on the floor.
Found-by: Joshua Jensen <jjensen@workspacewhiz.com>
Tracked-down-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
display_error_msgs() prints all the errors to stderr already (if any),
followed by "Aborting" (if any) to stdout. Make the latter go to stderr
instead.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the pathspec pruning of traverse_trees() from unpack_trees(). Again,
the unpack_trees() machinery is primarily meant for merging two (or more)
trees, and because a merge is a full tree operation, it didn't support any
pruning with pathspec, and this codepath probably should not be enabled
while running a merge, but the caller in diff-lib.c::diff_cache() should
be able to take advantage of it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Break down no-lstat() condition checks in verify_uptodate()
t7400: fix bogus test failure with symlinked trash
Documentation: clarify the invalidated tree entry format
Make it easier to grok under what conditions we can skip lstat().
While at there, shorten ie_match_stat() line for the sake of my eyes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A negative return from the unpack callback function usually means unpack
failed for the entry and signals the unpack_trees() machinery to fail the
entire merge operation, immediately and there is no other way for the
callback to tell the machinery to exit early without reporting an error.
This is what we usually want to make a merge all-or-nothing operation, but
the machinery is also used for diff-index codepath by using a custom
unpack callback function. And we do sometimes want to exit early without
failing, namely when we are under --quiet and can short-cut the diff upon
finding the first difference.
Add "exiting_early" field to unpack_trees_options structure, to signal the
unpack_trees() machinery that the negative return value is not signaling
an error but an early return from the unpack_trees() machinery. As this by
definition hasn't unpacked everything, discard the resulting index just
like the failure codepath.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now there was no way to test if unpack_trees() with update=1 would
succeed without really updating the work tree. The reason for that is that
setting update to 0 does skip the tests for new files and deactivates the
sparse handling, thereby making that unsuitable as a dry run.
Add the new dry_run flag to struct unpack_trees_options unpack_trees().
Setting that together with the update flag will check if the work tree
update would be successful without doing it for real.
The only class of problems that is not detected at the moment are file
system conditions like ENOSPC or missing permissions. Also the index
entries of updated files are not as they would be after a real checkout
because lstat() isn't run as the files aren't updated for real.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse-setting code follows closely how files are excluded in
read_directory(), every entry (including directories) are fed to
excluded_from_list() to decide if the entry is suitable. Directories
are treated no different than files. If a directory is matched (or
not), the whole directory is considered matched (or not) and the
process moves on.
This generally works as long as there are no patterns to exclude parts
of the directory. In case of sparse checkout code, the following patterns
t
!t/t0000-basic.sh
will produce a worktree with full directory "t" even if t0000-basic.sh
is requested to stay out.
By the same reasoning, if a directory is to be excluded, any rules to
re-include certain files within that directory will be ignored.
Fix it by always checking files against patterns. If no pattern can be
used to decide whether an entry is in our out
(ie. excluded_from_list() returns -1), the entry will be
included/excluded the same as their parent directory.
Noticed-by: <skillzero@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When check_leading_path notices a file in the way of a new entry to be
checked out, verify_absent uses (1) the mode to determine whether it
is a directory (2) the rest of the stat information to check if this
is actually an old entry, disguised by a change in filename (e.g.,
README -> Readme) that is significant to git but insignificant to the
underlying filesystem. If lstat fails, these checks are performed
with an uninitialied stat structure, producing essentially random
results.
Better to just error out when lstat fails.
The easiest way to reproduce this is to remove a file after the
check_leading_path call and before the lstat in verify_absent. An
lstat failure other than ENOENT in check_leading_path would also
trigger the same code path.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When check_leading_path notices no file in the way of the new entry to
be checked out, verify_absent checks whether there is a directory
there or nothing at all. If that lstat call fails (for example due to
ENOMEM), it assumes ENOENT, meaning a directory with untracked files
would be clobbered in that case.
Check errno after calling lstat, and for conditions other than ENOENT,
just error out.
This is a theoretical race condition. lstat has to succeed moments
before it fails for there to be trouble.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack_trees() merges two trees (the current HEAD and the destination
commit) when switching to another branch, checking and updating the index
entry where the destination differs from the current HEAD. It merges three
trees (the common ancestor, the current HEAD and the other commit) when
performing a three-way merge, checking and updating the index entry when
the merge result differs from the current HEAD. It does so by walking the
input trees in parallel all the way down to the leaves.
One common special case is a directory is identical across the trees
involved in the merge. In such a case, we do not have to descend into the
directory at all---we know that the end result is to keep the entries in
the current index.
This optimization cannot be applied in a few special cases in
unpack_trees(), though. We need to descend into the directory and update
the index entries from the target tree in the following cases:
- When resetting (e.g. "git reset --hard"); and
- When checking out a tree for the first time into an empty working tree
(e.g. "git read-tree -m -u HEAD HEAD" with missing .git/index).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/maint-fix-add-typo-detection:
Revert "excluded_1(): support exclude files in index"
unpack-trees: fix sparse checkout's "unable to match directories"
unpack-trees: move all skip-worktree checks back to unpack_trees()
dir.c: add free_excludes()
cache.h: realign and use (1 << x) form for CE_* constants
An aborted merge prints the list of rejected paths as part of the
error message. Since commit f66caaf9 (do not overwrite files in
leading path), some of those paths do not have static buffers, so
we have to keep a copy. Use string_list's to accomplish this.
This changes the order of the list to the order in which the paths
are processed. Previously, it was reversed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the work tree contains an untracked file x, and
unpack-trees wants to checkout a path x/*, the
file x is removed unconditionally.
Instead, apply the same checks that are normally
used for untracked files, and abort if the file
cannot be removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This wraps some inline code into the function check_ok_to_remove(),
which will later be used for leading path components as well.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matching index entries against an excludes file currently has two
problems.
First, there's no function to do it. Code paths (like sparse
checkout) that wanted to try it would iterate over index entries and
for each index entry pass that path to excluded_from_list(). But that
is not how excluded_from_list() works; one is supposed to feed in each
ancester of a path before a given path to find out if it was excluded
because of some parent or grandparent matching a
bigsubdirectory/
pattern despite the path not matching any .gitignore pattern directly.
Second, it's inefficient. The excludes mechanism is supposed to let
us block off vast swaths of the filesystem as uninteresting; separately
checking every index entry doesn't fit that model.
Introduce a new function to take care of both these problems. This
traverses the index in depth-first order (well, that's what order the
index is in) to mark un-excluded entries.
Maybe some day the in-core index format will be restructured to make
this sort of operation easier. Or maybe we will want to try some
binary search based thing. The interface is simple enough to allow
all those things. Example:
clear_ce_flags(the_index.cache, the_index.cache_nr,
CE_CANDIDATE, CE_CLEARME, exclude_list);
would clear the CE_CLEARME flag on all index entries with
CE_CANDIDATE flag and not matched by exclude_list.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, the will_have_skip_worktree() checks are done in various
places, which makes it hard to traverse the index tree-alike, required
by excluded_from_list(). This patch moves all the checks into two
loops in unpack_trees().
Entries in index in this operation can be classified into two
groups: ones already in index before unpack_trees() is called and ones
added to index after traverse_trees() is called.
In both groups, before checking file status on worktree, the future
skip-worktree bit must be checked, so that if an entry will be outside
worktree, worktree should not be checked.
For the first group, the future skip-worktree bit is precomputed and
stored as CE_NEW_SKIP_WORKTREE in the first loop before
traverse_trees() is called so that *way_merge() function does not need
to compute it again.
For the second group, because we don't know what entries will be in
this group until traverse_trees() finishes, operations that need
future skip-worktree check is delayed until CE_NEW_SKIP_WORKTREE is
computed in the second loop. CE_ADDED is used to mark entries in the
second group.
CE_ADDED and CE_NEW_SKIP_WORKTREE are temporary flags used in
unpack_trees(). CE_ADDED is only used by add_to_index(), which should
not be called while unpack_trees() is running.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An aborted merge prints the list of rejected paths as part of the
error message. Since commit f66caaf9 (do not overwrite files in
leading path), some of those paths do not have static buffers, so
we have to keep a copy. Use string_list's to accomplish this.
This changes the order of the list to the order in which the paths
are processed. Previously, it was reversed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the work tree contains an untracked file x, and
unpack-trees wants to checkout a path x/*, the
file x is removed unconditionally.
Instead, apply the same checks that are normally
used for untracked files, and abort if the file
cannot be removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
This wraps some inline code into the function check_ok_to_remove(),
which will later be used for leading path components as well.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
* dg/local-mod-error-messages:
t7609-merge-co-error-msgs: test non-fast forward case too.
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
setup_unpack_trees_porcelain: take the whole options struct as parameter
Move set_porcelain_error_msgs to unpack-trees.c and rename it
Conflicts:
merge-recursive.c
Not only this makes the code clearer since setting up the porcelain error
message is meant to work with show_all_errors, but this fixes a call to
setup_unpack_trees_porcelain() in git_merge_trees() which did not set
show_all_errors.
add_rejected_path() used to double-check whether it was running in
plumbing mode. This check was ineffective since it was setting
show_all_errors too late for traverse_trees() to see it, and is made
useless by this patch. Remove it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparation patch to let setup_unpack_trees_porcelain set
show_all_errors itself.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is currently dealing only with error messages, but the
intent of calling it is really to notify the unpack-tree mechanics that
it is running in porcelain mode.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/fix-sparse-checkout:
unpack-trees: mark new entries skip-worktree appropriately
unpack-trees: do not check for conflict entries too early
unpack-trees: let read-tree -u remove index entries outside sparse area
unpack-trees: only clear CE_UPDATE|CE_REMOVE when skip-worktree is always set
t1011 (sparse checkout): style nitpicks
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Conflicts:
t/t3400-rebase.sh
When an error is encountered, it calls add_rejected_file() which either
- directly displays the error message and stops if in plumbing mode
(i.e. if show_all_errors is not initialized at 1)
- or stores it so that it will be displayed at the end with display_error_msgs(),
Storing the files by error type permits to have a list of files for
which there is the same error instead of having a serie of almost
identical errors.
As each bind_overlap error combines a file and an old file, a list cannot be
done, therefore, theses errors are not stored but directly displayed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To limit the number of possible error messages, the error messages for
the case would_lose_untracked_file and would_lose_orphaned in
unpack_trees_options.msgs were handled with a single string,
parameterized by an action string ("overwritten" or "removed").
Instead, we consider them as two different cases, with unparameterized
string. This will make it easier to make separate lists sorted by error
types later.
Only the bind_overlap case still takes two %s parameters, but that's
unavoidable.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A porcelain message was first added in checkout.c in the commit
8ccba008 (Junio C Hamano, Sat May 17 21:03:49 2008, unpack-trees:
allow Porcelain to give different error messages) to give better feedback
in the case of merge errors.
This patch adapts the porcelain messages for the case of checkout
instead. This way, when having a checkout error, "merge" no longer
appears in the error message.
While we're there, we add an advice in the case of
would_lose_untracked_file.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of error messages was introduced as a structure, but an array
indexed over an enum is more flexible, since it allows one to store a
type of error message (index in the array) in a variable.
This change needs to rename would_lose_untracked ->
would_lose_untracked_file to avoid a clash with the function
would_lose_untracked in merge-recursive.c.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying problem is that the fill_tree_descriptor()
API is easy to misuse, and this patch does not fix that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse checkout narrows worktree down based on the skip-worktree bit
before and after $GIT_DIR/info/sparse-checkout application. If it does
not have that bit before but does after, a narrow is detected and the
file will be removed from worktree.
New files added by merge, however, does not have skip-worktree bit. If
those files appear to be outside checkout area, the same rule applies:
the file gets removed from worktree even though they don't exist in
worktree.
Just pretend they have skip-worktree before in that case, so the rule
is ignored.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of sparse checkout is conflict entries should always stay
in worktree, regardless $GIT_DIR/info/sparse-checkout. Therefore,
ce_stage(ce) usually means no CE_SKIP_WORKTREE. This is true when all
entries have been merged into the index, and identical staged entries
collapsed.
However, will_have_skip_worktree() since f1f523e (unpack-trees():
ignore worktree check outside checkout area) is also used earlier in
verify_* functions, where entries have not been merged to index yet
and ce_stage() is not zero. Checking ce_stage() then may provoke
unnecessary verification on entries outside checkout area and error
out.
This fixes part of test case "read-tree adds to worktree, dirty case".
The error
error: Untracked working tree file 'sub/added' would be overwritten by merge.
is now gone and (unfortunately) replaced by another error, which will
be addressed in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid touching the worktree outside a sparse checkout,
when the update flag is enabled unpack_trees() clears the
CE_UPDATE and CE_REMOVE flags on entries that do not match the
sparse pattern before actually committing any updates to the
index file or worktree.
The effect on the index was unintentional; sparse checkout was
never meant to prevent index updates outside the area checked
out. And the result is very confusing: for example, after a
failed merge, currently "git reset --hard" does not reset the
state completely but an additional "git reset --mixed" will.
So stop clearing the CE_REMOVE flag. Instead, maintain a
CE_WT_REMOVE flag to separately track whether a particular
file removal should apply to the worktree in addition to the
index or not.
The CE_WT_REMOVE flag is used already to mark files that
should be removed because of a narrowing checkout area. That
usage will still apply; do not clear the CE_WT_REMOVE flag
in that case (detectable because the CE_REMOVE flag is not
set).
This bug masked some other bugs illustrated by the test
suite, which will be addressed by later patches.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Fixes: http://bugs.debian.org/583699
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of this clearing is, as explained in comment, because
verify_*() may set those bits before apply_sparse_checkout() is
called. By that time, it's not clear whether an entry will stay in
checkout area or out. After $GIT_DIR/info/sparse-checkout is applied,
we know what entries will be in finally. It's time to clean unwanted
bits.
That works perfectly when checkout area remains unchanged. When
checkout area changes, apply_sparse_checkout() may set CE_UPDATE
or CE_WT_REMOVE to widen/narrow checkout area. Doing the clearing
after apply_sparse_checkout() may clear those widening/narrowing
bits unexpectedly.
So, only do that on entries that are not affected by checkout area
changes (i.e. skip-worktree bit does not change after
apply_sparse_checkout).
This code does not actually fix anything though, just
future-proof. The removed code and the narrow/widen code inside
apply_sparse_checkout are currently independent (narrow code never
sets CE_REMOVE, widen code sets CE_UPDATE, but ce_skip_worktree()
would be false).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
When traversing trees with an index, the current index pointer
(o->cache_bottom) occasionally has to be temporarily advanced forwards to
match the traversal order of the tree, which is not the same as the sort
order of the index. The existing algorithm that did this (introduced in
730f72840c) would get "stuck" when the
cache_bottom was popped and then repeatedly check the same index entries
over and over. This represents a serious performance regression for
large repositories compared to the old "broken" traversal order.
This commit makes a simple change to mitigate this. Whenever
find_cache_pos sees that the current pos is also the cache_bottom, and
it has already been unpacked, it advances the cache_bottom as well as
the current pos. This prevents the above "sticking" behavior without
dramatically changing the algorithm.
In addition, this commit moves the unpacked check above the
ce_in_traverse_path() check. The simple bitmask check is cheaper, and
in the case described above will be firing quite a bit to advance the
cache_bottom after a tree pop.
This yields considerable performance improvements for large trees.
The following are the number of function calls for "git diff HEAD" on
the Linux kernel tree, with 33,307 files:
Symbol Calls Before Calls After
------------------- ------------ -----------
unpack_callback 35,332 35,332
find_cache_pos 37,357 37,357
ce_in_traverse_path 4,979,473 37,357
do_compare_entry 6,828,181 251,925
df_name_compare 6,828,181 251,925
And on a repository of 187,456 files:
Symbol Calls Before Calls After
------------------- ------------ -----------
unpack_callback 197,958 197,958
find_cache_pos 208,460 208,460
ce_in_traverse_path 37,308,336 208,460
do_compare_entry 156,950,469 2,690,626
df_name_compare 156,950,469 2,690,626
On the latter repository, user time for "git diff HEAD" was reduced from
5.58 to 0.42 seconds. This is compared to 0.30 seconds before the
traversal order fix was implemented.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, there are still plenty of production systems with
vendor compilers that choke unless all compound declarations can be
determined statically at compile time, for example hpux10.20 (I can
provide a comprehensive list of our supported platforms that exhibit
this problem if necessary).
This patch simply breaks apart any compound declarations with dynamic
initialisation expressions, and moves the initialisation until after
the last declaration in the same block, in all the places necessary to
have the offending compilers accept the code.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A merge will fail gracefully if it needs to update files marked
"assume unchanged", but other similar commands will not. In
particular, checkout and rebase will silently overwrite changes to
such files.
This is a regression introduced in commit 1dcafcc0 (verify_uptodate():
add ce_uptodate(ce) test), which avoids lstat's during a merge, if the
index entry is up-to-date. If the CE_VALID flag is set, however, we
cannot trust CE_UPTODATE.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces the remove_or_warn function which is a
generalised version of the {unlink,rmdir}_or_warn functions. It takes
an additional parameter indicating the mode of the file to be removed.
The patch also modifies certain functions to use remove_or_warn
where appropriate, and adds a test case for a bug fixed by the use
of remove_or_warn.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
* cc/reset-more:
t7111: check that reset options work as described in the tables
Documentation: reset: add some missing tables
Fix bit assignment for CE_CONFLICTED
"reset --merge": fix unmerged case
reset: use "unpack_trees()" directly instead of "git read-tree"
reset: add a few tests for "git reset --merge"
Documentation: reset: add some tables to describe the different options
reset: improve mixed reset error message when in a bare repo
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
Change the unlink_entry function to use rmdir to remove submodule
directories. Currently we try to use unlink, which will never succeed.
Of course rmdir will only succeed for empty (i.e. not checked out)
submodule directories. Behaviour if a submodule is checked out stays
essentially the same: print a warning message and keep the submodule
directory.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the traversal of index be in sync with the tree traversal.
When unpack_callback() is fed a set of tree entries from trees, it
inspects the name of the entry and checks if the an index entry with
the same name could be hiding behind the current index entry, and
(1) if the name appears in the index as a leaf node, it is also
fed to the n_way_merge() callback function;
(2) if the name is a directory in the index, i.e. there are entries in
that are underneath it, then nothing is fed to the n_way_merge()
callback function;
(3) otherwise, if the name comes before the first eligible entry in the
index, the index entry is first unpacked alone.
When traverse_trees_recursive() descends into a subdirectory, the
cache_bottom pointer is moved to walk index entries within that directory.
All of these are omitted for diff-index, which does not even want to be
fed an index entry and a tree entry with D/F conflicts.
This fixes 3-way read-tree and exposes a bug in other parts of the system
in t6035, test #5. The test prepares these three trees:
O = HEAD^
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/b/c/d
100644 blob e69de29bb2 a/x
A = HEAD
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/b/c/d
100644 blob 587be6b4c3f93f93c489c0111bba5596147a26cb a/x
B = master
120000 blob a36b77384451ea1de7bd340ffca868249626bc52 a/b
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/x
With a clean index that matches HEAD, running
git read-tree -m -u --aggressive $O $A $B
now yields
120000 a36b77384451ea1de7bd340ffca868249626bc52 3 a/b
100644 e69de29bb2 0 a/b-2/c/d
100644 e69de29bb2 1 a/b/c/d
100644 e69de29bb2 2 a/b/c/d
100644 587be6b4c3f93f93c489c0111bba5596147a26cb 0 a/x
which is correct. "master" created "a/b" symlink that did not exist,
and removed "a/b/c/d" while HEAD did not do touch either path.
Before this series, read-tree did not notice the situation and resolved
addition of "a/b" and removal of "a/b/c/d" independently. If A = HEAD had
another path "a/b/c/e" added, this merge should conflict but instead it
silently resolved "a/b" and then immediately overwrote it to add
"a/b/c/e", which was quite bogus.
Tests in t1012 start to work with this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares but does not yet implement a look-ahead in the index entries
when traverse-trees.c decides to give us tree entries in an order that
does not match what is in the index.
A case where a look-ahead in the index is necessary happens when merging
branch B into branch A while the index matches the current branch A, using
a tree O as their common ancestor, and these three trees looks like this:
O A B
t t
t-i t-i t-i
t-j t-j
t/1
t/2
The traverse_trees() function gets "t", "t-i" and "t" from trees O, A and
B first, and notices that A may have a matching "t" behind "t-i" and "t-j"
(indeed it does), and tells A to give that entry instead. After unpacking
blob "t" from tree B (as it hasn't changed since O in B and A removed it,
it will result in its removal), it descends into directory "t/".
The side that walked index in parallel to the tree traversal used to be
implemented with one pointer, o->pos, that points at the next index entry
to be processed. When this happens, the pointer o->pos still points at
"t-i" that is the first entry. We should be able to skip "t-i" and "t-j"
and locate "t/1" from the index while the recursive invocation of
traverse_trees() walks and match entries found there, and later come back
to process "t-i".
While that look-ahead is not implemented yet, this adds a flag bit,
CE_UNPACKED, to mark the entries in the index that has already been
processed. o->pos pointer has been renamed to o->cache_bottom and it
points at the first entry that may still need to be processed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the ancestor used to have a blob "P", your tree removed it, and the
tree you are merging with also removed it, the agressive three-way cleanly
merges to remove that blob. If the other tree added a new blob "P/Q"
while removing "P", it should also merge cleanly to remove "P" and create
"P/Q" (since neither the ancestor nor your tree could have had it, so it
is a typical "created in one").
The "aggressive" rule is not new anymore. Reword the stale comment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed
"git reset --merge" when there was unmerged entries. But it wished if
unmerged entries were reset as if --hard (instead of --merge) has been
used. This makes sense because all "mergy" operations makes sure that
any path involved in the merge does not have local modifications before
starting, so resetting such a path away won't lose any information.
The previous commit changed the behavior of --merge to accept resetting
unmerged entries if they are reset to a different state than HEAD, but it
did not reset the changes in the work tree, leaving the conflict markers
in the resulting file in the work tree.
Fix it by doing three things:
- Update the documentation to match the wish of original "reset --merge"
better, namely, "An unmerged entry is a sign that the path didn't have
any local modification and can be safely resetted to whatever the new
HEAD records";
- Update read_index_unmerged(), which reads the index file into the cache
while dropping any higher-stage entries down to stage #0, not to copy
the object name from the higher stage entry. The code used to take the
object name from the a stage entry ("base" if you happened to have
stage #1, or "ours" if both sides added, etc.), which essentially meant
that you are getting random results depending on what the merge did.
The _only_ reason we want to keep a previously unmerged entry in the
index at stage #0 is so that we don't forget the fact that we have
corresponding file in the work tree in order to be able to remove it
when the tree we are resetting to does not have the path. In order to
differentiate such an entry from ordinary cache entry, the cache entry
added by read_index_unmerged() is marked as CE_CONFLICTED.
- Update merged_entry() and deleted_entry() so that they pay attention to
cache entries marked as CE_CONFLICTED. They are previously unmerged
entries, and the files in the work tree that correspond to them are
resetted away by oneway_merge() to the version from the tree we are
resetting to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously CE_MATCH_IGNORE_VALID flag is used by both valid and
skip-worktree bits. While the two bits have similar behaviour, sharing
this flag means "git update-index --really-refresh" will ignore
skip-worktree while it should not. Instead another flag is
introduced to ignore skip-worktree bit, CE_MATCH_IGNORE_VALID only
applies to valid bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack_index_entry() failed, consistently call unpack_failed(),
instead of silently returning -1.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way sparse checkout works, users may empty their worktree
completely, because of non-matching sparse-checkout spec, or empty
spec. I believe this is not desired. This patch makes Git refuse to
produce such worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify_absent() and verify_uptodate() are used to ensure worktree
is safe to be updated, then CE_REMOVE or CE_UPDATE will be set.
Finally check_updates() bases on CE_REMOVE, CE_UPDATE and the
recently added CE_WT_REMOVE to update working directory accordingly.
The entries that are checked may eventually be left out of checkout
area (done later in apply_sparse_checkout()). We don't want to update
outside checkout area. This patch teaches Git to assume "good",
skip these checks when it's sure those entries will be outside checkout
area, and clear CE_REMOVE|CE_UPDATE that could be set due to this
assumption.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces core.sparseCheckout, which will control whether
sparse checkout support is enabled in unpack_trees()
It also loads sparse-checkout file that will be used in the next patch.
I split it out so the next patch will be shorter, easier to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CE_REMOVE now removes both worktree and index versions. Sparse
checkout must be able to remove worktree version while keep the
index intact when checkout area is narrowed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this code path, we would remove "old" and replace it with "merge".
"old" may have skip-worktree bit, so re-add it to "merge".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This part is mainly to remove CE_VALID shortcuts (and as a
consequence, ce_uptodate() shortcuts as it may be turned on by
CE_VALID) in writing code path if skip-worktree is used. Various tests
are added to avoid future breakages.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we switch branches with "checkout -f", unpack_trees() feeds two
cache_entries to oneway_merge() function in its src[] array argument. The
zeroth entry comes from the current index, and the first entry represents
what the merge result should be, taken from the tree recorded in the
commit we are switching to.
When we have a blob (either regular file or a symlink) in the index and in
the work tree at path "foo", and the switched-to tree has "foo/bar",
i.e. "foo" becomes a directory, src[0] is obviously that blob currently
registered at "foo". Even though we do not have anything at "foo" in the
switched-to tree, src[1] is _not_ NULL in this case.
The unpack_trees() machinery places a special marker df_conflict_entry
to signal that no blob exists at "foo", but it will become a directory
that may have somthing underneath it (namely "foo/bar"), so a usual 3-way
merge can notice the situation.
But oneway_merge() codepath failed to notice this and passed the special
marker directly to merged_entry(). This happens to remove the "foo" in
the end because the df_conflict_entry does not have any name (hence the
"error" message) and its addition in add_index_entry() is rejected, but it
is wrong.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
In our 'oneway_merge()' we always do an 'lstat()' to see if we might
need to mark the entry for updating.
But we really shouldn't need to do that when the cache entry is already
marked as being ce_uptodate(), and this makes us do unnecessary lstat()
calls if we have index preloading enabled.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The c99 MIPSpro Compiler version 7.4.4m on IRIX 6.5 does not properly
initialize run-time initialized arrays. An array which is initialized with
fewer elements than the length of the array should have the unitialized
elements initialized to zero. This compiler only initializes the remaining
elements when the last element is a static parameter. So work around it
by adding a "NULL" initialization parameter.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop the insanity with separate 'path' and 'base' arguments that must
match. We don't need that crazy interface any more, since we cleaned up
handling of 'path' in commit da4b3e8c28.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "diff-index --cached" after making a change to only a small
portion of the index, there is no point unpacking unchanged subtrees into
the index recursively, only to find that all entries match anyway. Tweak
unpack_trees() logic that is used to read in the tree object to catch the
case where the tree entry we are looking at matches the index as a whole
by looking at the cache-tree.
As an exercise, after modifying a few paths in the kernel tree, here are
a few numbers on my Athlon 64X2 3800+:
(without patch, hot cache)
$ /usr/bin/time git diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.07user 0.02system 0:00.09elapsed 102%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+9407minor)pagefaults 0swaps
(with patch, hot cache)
$ /usr/bin/time ../git.git/git-diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.02user 0.00system 0:00.02elapsed 103%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+2446minor)pagefaults 0swaps
Cold cache numbers are very impressive, but it does not matter very much
in practice:
(without patch, cold cache)
$ su root sh -c 'echo 3 >/proc/sys/vm/drop_caches'
$ /usr/bin/time git diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.06user 0.17system 0:10.26elapsed 2%CPU (0avgtext+0avgdata 0maxresident)k
247032inputs+0outputs (1172major+8237minor)pagefaults 0swaps
(with patch, cold cache)
$ su root sh -c 'echo 3 >/proc/sys/vm/drop_caches'
$ /usr/bin/time ../git.git/git-diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.02user 0.01system 0:01.01elapsed 3%CPU (0avgtext+0avgdata 0maxresident)k
18440inputs+0outputs (79major+2369minor)pagefaults 0swaps
This of course helps "git status" as well.
(without patch, hot cache)
$ /usr/bin/time ../git.git/git-status >/dev/null
0.17user 0.18system 0:00.35elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+5336outputs (0major+10970minor)pagefaults 0swaps
(with patch, hot cache)
$ /usr/bin/time ../git.git/git-status >/dev/null
0.10user 0.16system 0:00.27elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+5336outputs (0major+3921minor)pagefaults 0swaps
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/attributes-checkout:
Add a test for checking whether gitattributes is honored by checkout.
Read attributes from the index that is being checked out
Traditionally we used .gitattributes file from the work tree if exists,
and otherwise read from the index as a fallback. When switching to a
branch that has an updated .gitattributes file, and entries in it give
different attributes to other paths being checked out, we should instead
read from the .gitattributes in the index.
This breaks a use case of fixing incorrect entries in the .gitattributes
in the work tree (without adding it to the index) and checking other paths
out, though.
$ edit .gitattributes ;# mark foo.dat as binary
$ rm foo.dat
$ git checkout foo.dat
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree A B C..." without the "-m" (merge) option is a way to read
these trees on top of each other to get an overlay of them.
An ancient commit ee6566e (Rewrite read-tree, 2005-09-05) passed the
ADD_CACHE_SKIP_DFCHECK flag when calling add_index_entry() to add the
paths obtained from these trees to the index, but it is an incorrect use
of the flag. The flag is meant to be used by callers who know the
addition of the entry does not introduce a D/F conflict to the index in
order to avoid the overhead of checking.
This bug resulted in a bogus index that records both "x" and "x/z" as a
blob after reading three trees that have paths ("x"), ("x", "y"), and
("x/z", "y") respectively. 34110cd (Make 'unpack_trees()' have a separate
source and destination index, 2008-03-06) refactored the callsites of
add_index_entry() incorrectly and added more codepaths that use this flag
when it shouldn't be used.
Also, 0190457 (Move 'unpack_trees()' over to 'traverse_trees()' interface,
2008-03-05) introduced a bug to call add_index_entry() for the tree that
does not have the path in it, passing NULL as a cache entry. This caused
reading multiple trees, one of which has path "x" but another doesn't, to
segfault.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, the lack of USE_NSEC meant "do not record nor use the
nanosecond resolution part of the file timestamps". To avoid problems on
filesystems that lose the ns part when the metadata is flushed to the disk
and then later read back in, disabling USE_NSEC has been a good idea in
general.
If you are on a filesystem without such an issue, it does not hurt to read
and store them in the cached stat data in the index entries even if your
git is compiled without USE_NSEC. The index left with such a version of
git can be read by git compiled with USE_NSEC and it can make use of the
nanosecond part to optimize the check to see if the path on the filesystem
hsa been modified since we last looked at.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we inside verify_uptodate() can already tell from the ce entry that
it is already uptodate by testing it with ce_uptodate(ce), there is no
need to call lstat(2) and ie_match_stat() afterwards.
And, reading from the commit log message from:
commit eadb583134
Author: Junio C Hamano <gitster@pobox.com>
Date: Fri Jan 18 23:45:24 2008 -0800
Avoid running lstat(2) on the same cache entry.
this also seems to be correct usage of the ce_uptodate() macro
introduced by that patch.
This will avoid lots of lstat(2) calls in some cases, for example
by running the 'git checkout' command.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the filesystem ext4 is now defined as stable in Linux v2.6.28,
and ext4 supports nanonsecond resolution timestamps natively, it is
time to make USE_NSEC work as expected.
This will make racy git situations less likely to happen. For 'git
checkout' this means it will be less likely that we have to open, read
the contents of the file into RAM, and check if file is really
modified or not. The result sould be a litle less used CPU time, less
pagefaults and a litle faster program, at least for 'git checkout'.
Since the number of possible racy git situations would increase when
disks gets faster, this patch would be more and more helpfull as times
go by. For a fast Solid State Disk, this patch should be helpfull.
Note that, when file operations starts to take less than 1 nanosecond,
one would again start to get more racy git situations.
For more info on racy git, see Documentation/technical/racy-git.txt
For more info on ext4, see http://kernelnewbies.org/Ext4
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Below is oprofile output from GIT command 'git chekcout -q my-v2.6.25'
(move from tag v2.6.27 to tag v2.6.25 of the Linux kernel):
CPU: Core 2, speed 1999.95 MHz (estimated)
Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit
mask of 0x00 (Unhalted core cycles) count 20000
Counted INST_RETIRED_ANY_P events (number of instructions retired) with a
unit mask of 0x00 (No unit mask) count 20000
CPU_CLK_UNHALT...|INST_RETIRED:2...|
samples| %| samples| %|
------------------------------------
409247 100.000 342878 100.000 git
CPU_CLK_UNHALT...|INST_RETIRED:2...|
samples| %| samples| %|
------------------------------------
260476 63.6476 257843 75.1996 libz.so.1.2.3
100876 24.6492 64378 18.7758 kernel-2.6.28.4_2.vmlinux
30850 7.5382 7874 2.2964 libc-2.9.so
14775 3.6103 8390 2.4469 git
2020 0.4936 4325 1.2614 libcrypto.so.0.9.8
191 0.0467 32 0.0093 libpthread-2.9.so
58 0.0142 36 0.0105 ld-2.9.so
1 2.4e-04 0 0 libldap-2.3.so.0.2.31
Detail list of the top 20 function entries (libz counted in one blob):
CPU_CLK_UNHALTED INST_RETIRED_ANY_P
samples % samples % image name symbol name
260476 63.6862 257843 75.2725 libz.so.1.2.3 /lib/libz.so.1.2.3
16587 4.0555 3636 1.0615 libc-2.9.so memcpy
7710 1.8851 277 0.0809 libc-2.9.so memmove
3679 0.8995 1108 0.3235 kernel-2.6.28.4_2.vmlinux d_validate
3546 0.8670 2607 0.7611 kernel-2.6.28.4_2.vmlinux __getblk
3174 0.7760 1813 0.5293 libc-2.9.so _int_malloc
2396 0.5858 3681 1.0746 kernel-2.6.28.4_2.vmlinux copy_to_user
2270 0.5550 2528 0.7380 kernel-2.6.28.4_2.vmlinux __link_path_walk
2205 0.5391 1797 0.5246 kernel-2.6.28.4_2.vmlinux ext4_mark_iloc_dirty
2103 0.5142 1203 0.3512 kernel-2.6.28.4_2.vmlinux find_first_zero_bit
2077 0.5078 997 0.2911 kernel-2.6.28.4_2.vmlinux do_get_write_access
2070 0.5061 514 0.1501 git cache_name_compare
2043 0.4995 1501 0.4382 kernel-2.6.28.4_2.vmlinux rcu_irq_exit
2022 0.4944 1732 0.5056 kernel-2.6.28.4_2.vmlinux __ext4_get_inode_loc
2020 0.4939 4325 1.2626 libcrypto.so.0.9.8 /usr/lib/libcrypto.so.0.9.8
1965 0.4804 1384 0.4040 git patch_delta
1708 0.4176 984 0.2873 kernel-2.6.28.4_2.vmlinux rcu_sched_grace_period
1682 0.4112 727 0.2122 kernel-2.6.28.4_2.vmlinux sysfs_slab_alias
1659 0.4056 290 0.0847 git find_pack_entry_one
1480 0.3619 1307 0.3816 kernel-2.6.28.4_2.vmlinux ext4_writepage_trans_blocks
Notice the memmove line, where the CPU did 7710 / 277 = 27.8 cycles
per instruction, and compared to the total cycles spent inside the
source code of GIT for this command, all the memmove() calls
translates to (7710 * 100) / 14775 = 52.2% of this.
Retesting with a GIT program compiled for gcov usage, I found out that
the memmove() calls came from remove_index_entry_at() in read-cache.c,
where we have:
memmove(istate->cache + pos,
istate->cache + pos + 1,
(istate->cache_nr - pos) * sizeof(struct cache_entry *));
remove_index_entry_at() is called 4902 times from check_updates() in
unpack-trees.c, and each time called we move each cache_entry pointers
(from the removed one) one step to the left.
Since we have 28828 entries in the cache this time, and if we on
average move half of them each time, we in total move approximately
4902 * 0.5 * 28828 * 4 = 282 629 712 bytes, or twice this amount if
each pointer is 8 bytes (64 bit).
OK, is seems that the function check_updates() is called 28 times, so
the estimated guess above had been more correct if check_updates() had
been called only once, but the point is: we get lots of bytes moved.
To fix this, and use an O(N) algorithm instead, where N is the number
of cache_entries, we delete/remove all entries in one loop through all
entries.
From a retest, the new remove_marked_cache_entries() from the patch
below, ended up with the following output line from oprofile:
46 0.0105 15 0.0041 git remove_marked_cache_entries
If we can trust the numbers from oprofile in this case, we saved
approximately ((7710 - 46) * 20000) / (2 * 1000 * 1000 * 1000) = 0.077
seconds CPU time with this fix for this particular test. And notice
that now the CPU did only 46 / 15 = 3.1 cycles/instruction.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently inside unlink_entry() if we get a successful removal of one
file with unlink(), we try to remove the leading directories each and
every time. So if one directory containing 200 files is moved to an
other location we get 199 failed calls to rmdir() and 1 successful
call.
To fix this and avoid some unnecessary calls to rmdir(), we schedule
each directory for removal and wait much longer before we do the real
call to rmdir().
Since the unlink_entry() function is called with alphabetically sorted
names, this new function end up being very effective to avoid
unnecessary calls to rmdir(). In some cases over 95% of all calls to
rmdir() is removed with this patch.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameter n of unpack_callback() can have a value of up to
MAX_UNPACK_TREES. The check at the top of unpack_trees() (its only
(indirect) caller) makes sure it cannot exceed this limit.
unpack_callback() passes it and the array src to unpack_nondirectories(),
which has this loop:
for (i = 0; i < n; i++) {
/* ... */
src[i + o->merge] = o->df_conflict_entry;
o->merge can be 0 or 1, so unpack_nondirectories() potentially accesses
the array src at index MAX_UNPACK_TREES. This patch makes it big enough.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/lstat-cache:
lstat_cache(): introduce clear_lstat_cache() function
lstat_cache(): introduce invalidate_lstat_cache() function
lstat_cache(): introduce has_dirs_only_path() function
lstat_cache(): introduce has_symlink_or_noent_leading_path() function
lstat_cache(): more cache effective symlink/directory detection
In some cases, especially inside the unpack-trees.c file, and inside
the verify_absent() function, we can avoid some unnecessary calls to
lstat(), if the lstat_cache() function can also be told to keep track
of non-existing directories.
So we update the lstat_cache() function to handle this new fact,
introduce a new wrapper function, and the result is that we save lots
of lstat() calls for a removed directory which previously contained
lots of files, when we call this new wrapper of lstat_cache() instead
of the old one.
We do similar changes inside the unlink_entry() function, since if we
can already say that the leading directory component of a pathname
does not exist, it is not necessary to try to remove a pathname below
it!
Thanks to Junio C Hamano, Linus Torvalds and Rene Scharfe for valuable
comments to this patch!
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the only caller, verify_absent, relies on the fact that o->pos
points to the next index entry anyways, there is no need to recompute
its position.
Furthermore, if a nondirectory entry were found, this would return too
early, because there could still be an untracked directory in the way.
This is currently not a problem, because verify_absent is only called
if the index does not have this entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0cf73755 (unpack-trees.c: assume submodules are clean during
check-out) changed an argument to verify_absent from 'path' to 'ce',
which is however shadowed by a local variable of the same name.
The bug triggers if verify_absent is used on a tree entry, for which
the index contains one or more subsequent directories of the same
length. The affected subdirectories are removed from the index. The
testcase included in this commit bisects to 55218834 (checkout: do not
lose staged removal), which reveals the bug in this case, but is
otherwise unrelated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 203a2fe1 (Allow callers of unpack_trees() to handle failure)
changed the "die on error" behavior to "return failure code".
verify_absent did not handle errors returned by
verify_clean_subdirectory, however.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were found using gcc 4.3.2-1ubuntu11 with the warning:
warning: format not a string literal and no format arguments
Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most cache_entry structs are allocated by using the
cache_entry_size macro, which rounds the size of the struct
up to the nearest multiple of 8 bytes (presumably to avoid
memory fragmentation).
There is one exception: the special "conflict entry" is
allocated with an empty name, and so is explicitly given
just one extra byte to hold the NUL.
However, later code doesn't realize that this particular
struct has been allocated differently, and happily tries
reading and copying it based on the ce_size macro, which
assumes the 8-byte alignment.
This can lead to reading uninitalized data, though since
that data is simply padding, there shouldn't be any problem
as a result. Still, it makes sense to hold the padding
assumption so as not to surprise later maintainers.
This fixes valgrind errors in t1005, t3030, t4002, and
t4114.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to checkout a different commit implements the safety to never
lose user's local changes. For example, switching from a commit to
another commit, when you have changed a path that is different between
them, need to merge your changes to the version from the switched-to
commit, which you may not necessarily be able to resolve easily. By
default, "git checkout" refused to switch branches, to give you a chance
to stash your local changes (or use "-m" to merge, accepting the risks of
getting conflicts).
This safety, however, had one deliberate hole since early June 2005. When
your local change was to remove a path (and optionally to stage that
removal), the command checked out the path from the switched-to commit
nevertheless.
This was to allow an initial checkout to happen smoothly (e.g. an initial
checkout is done by starting with an empty index and switching from the
commit at the HEAD to the same commit). We can tighten the rule slightly
to allow this special case to pass, without losing sight of removal
explicitly done by the user, by noticing if the index is truly empty when
the operation begins.
For historical background, see:
http://thread.gmane.org/gmane.comp.version-control.git/4641/focus=4646
This case is marked as *0* in the message, which both Linus and I said "it
feels somewhat wrong but otherwise we cannot start from an empty index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack_trees() rebuilds the in-core index from scratch by allocating a new
structure and finishing it off by copying the built one to the final
index.
The resulting in-core index is Ok for most use, but read_cache() does not
recognize it as such. The function is meant to be no-op if you already
have loaded the index, until you call discard_cache().
This change the way read_cache() detects an already initialized in-core
index, by introducing an extra bit, and marks the handcrafted in-core
index as initialized, to avoid this problem.
A better fix in the longer term would be to change the read_cache() API so
that it will always discard and re-read from the on-disk index to avoid
confusion. But there are higher level API that have relied on the current
semantics, and they and their users all need to get converted, which is
outside the scope of 'maint' track.
An example of such a higher level API is write_cache_as_tree(), which is
used by git-write-tree as well as later Porcelains like git-merge, revert
and cherry-pick. In the longer term, we should remove read_cache() from
there and add one to cmd_write_tree(); other callers expect that the
in-core index they prepared is what gets written as a tree so no other
change is necessary for this particular codepath.
The original version of this patch marked the index by pointing an
otherwise wasted malloc'ed memory with o->result.alloc, but this version
uses Linus's idea to use a new "initialized" bit, which is conceptually
much cleaner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of uniformly returning -1 on any error, this teaches
unpack_trees() to return -2 when the merge itself is Ok but worktree
refuses to get updated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing output is sacred as it is an API. We _could_ change it if it
is broken in such a way that it cannot convey necessary information fully,
but we just do not _reword_ for the sake of rewording. If somebody does
not like it, s/he is complaining too late. S/he should have been here in
early May 2005 and make the language used by the API closer to what humans
read. S/he wasn't here. Too bad, and it is too late.
And people who complain should look at a bigger picture. Look at what was
suggested by one of them and think for five seconds:
$ git checkout mytopic
-fatal: Entry 'frotz' not uptodate. Cannot merge.
+fatal: Entry 'frotz' has local changes. Cannot merge.
If you do not see something wrong with this output, your brain has already
been rotten with use of git for too long a time. Nobody asked us to
"merge" but why are we talking about "Cannot merge"?
This patch introduces a mechanism to allow Porcelains to specify messages
that are different from the ones that is given by the underlying plumbing
implementation of read-tree, so that we can reword the message Porcelains give
without disrupting the output from the plumbing.
$ git-checkout pu
error: You have local changes to 'Makefile'; cannot switch branches.
There are other places that ask unpack_trees() to n-way merge, detect
issues and let it issue error message on its own, but I did this as a
demonstration and replaced only one message.
Yes I know about C99 structure initializers. I'd love to use them but we
try to be nice to compilers without it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the base for making symlink detection in the middle fo a pathname
saner and (much) more efficient.
Under various loads, we want to verify that the full path leading up to a
filename is a real directory tree, and that when we successfully do an
'lstat()' on a filename, we don't get a false positive due to a symlink in
the middle of the path that git should have seen as a symlink, not as a
normal path component.
The 'has_symlink_leading_path()' function already did this, and cached
a single level of symlink information, but didn't cache the _lack_ of a
symlink, so the normal behaviour was actually the wrong way around, and we
ended up doing an 'lstat()' on each path component to check that it was a
real directory.
This caches the last detected full directory and symlink entries, and
speeds up especially deep directory structures a lot by avoiding to
lstat() all the directories leading up to each entry in the index.
[ This can - and should - probably be extended upon so that we eventually
never do a bare 'lstat()' on any path entries at *all* when checking the
index, but always check the full path carefully. Right now we do not
generally check the whole path for all our normal quick index
revalidation.
We should also make sure that we're careful about all the invalidation,
ie when we remove a link and replace it by a directory we should
invalidate the symlink cache if it matches (and vice versa for the
directory cache).
But regardless, the basic function needs to be sane to do that. The old
'has_symlink_leading_path()' was not capable enough - or indeed the code
readable enough - to really do that sanely. So I'm pushing this as not
just an optimization, but as a base for further work. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is immaterial on sane filesystems, but if you have a broken (aka
case-insensitive) filesystem, and the objective is to remove the file
'abc' and replace it with the file 'Abc', then we must make sure to do
the removal first.
Otherwise, you'd first update the file 'Abc' - which would just
overwrite the file 'abc' due to the broken case-insensitive filesystem -
and then remove file 'abc' - which would now brokenly remove the just
updated file 'Abc' on that broken filesystem.
By doing removals first, this won't happen.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we find an unexpected file, see if that filename perhaps exists in a
case-insensitive way in the index, and whether the file matches that. If
so, ignore it as a known pre-existing file of a different name.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now nobody uses it, but "index_name_exists()" gets a flag so
you can enable it on a case-by-case basis.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows verify_absent() in unpack_trees() to use the hash chains
rather than looking it up using the binary search.
Perhaps more importantly, it's also going to be useful for the next phase,
where we actually start looking at the cache entry when we do
case-insensitive lookups and checking the result.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 34110cd4e3 ("Make 'unpack_trees()'
have a separate source and destination index") I introduced a really
stupid bug in that it would always add merged entries with the CE_UPDATE
flag set. That caused us to always re-write the file, even when it was
already up-to-date in the source index.
Not only is that really stupid from a performance angle, but more
importantly it's actively wrong: if we have dirty state in the tree when
we merge, overwriting it with the result of the merge will incorrectly
overwrite that dirty state.
This trivially fixes the problem - simply don't set the CE_UPDATE flag
when the merge result matches the old state.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Sat, 15 Mar 2008, SZEDER G?bor wrote:
>
> The testcase usually fails during the first 25 run, but sometimes it
> runs more than 100 times before failing.
Damn, this series has had more subtle issues than I ever expected.
'git stash' creates its saved working tree object with:
# state of the working tree
w_tree=$( (
rm -f "$TMP-index" &&
cp -p ${GIT_INDEX_FILE-"$GIT_DIR/index"} "$TMP-index" &&
GIT_INDEX_FILE="$TMP-index" &&
export GIT_INDEX_FILE &&
git read-tree -m $i_tree &&
git add -u &&
git write-tree &&
rm -f "$TMP-index"
) ) ||
die "Cannot save the current worktree state"
which creates a new index file with the updates, and writes the tree from
that.
We have this logic where we compare the timestamp of the index with the
timestamp of the files and we then write them out "smudged" if they are
the same, and it basically depends on the fact that the date on the index
file is compared with the date encoded in the stat information itself.
And what is going on is:
- we create a new index file with that "cp". We are careful to preserve
the timestamps by using "-p", so this one should be all ok.
- then we *update* that index by resetting it to the tree with git
read-tree, but now we do *not* preserve the timestamp on this new copy
any more, even though we copy over all the timestamps on the files that
are indexed from the stat information!
Now, we always had that problem when re-writing the index, but we had this
clever workaround in the writing part: if the source had racily clean
entries, then when we wrote those out (and thus can't depend on the index
fiel timestamp showing that they are racily clean any more!), we would
smudge them when writing.
IOW, we handle this issue by having write_index() do this:
for (i = 0; i < entries; i++) {
...
if (is_racy_timestamp(istate, ce))
ce_smudge_racily_clean_entry(ce);
..
when writing out entries. And that all took care of it, because now when
we wrote the new index, we'd change the timestamp on the index, yes, but
we'd smudge the entries we wrote out, so now the resulting index would
still show that file as not-up-to-date any more.
But with commit 34110cd4e3 ("Make
'unpack_trees()' have a separate source and destination index"), this
logic no longer triggers, because we now write out the "result" index, and
that one never got its timestamp updated from the source index, so it had
lost all that "is_racy_timestamp()" information!
This trivial patch fixes it. It looks trivial, and it's a simple fix, but
boy did it take me way too much thinking and explaining to myself to
explain why there was a problem in the first place!
The trivial fix is to just copy the index timestamp from the source index
into the result index. But we only do this if we *have* a source index, of
course, and if we will even bother to use the result.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-tree -m can read up to MAX_TREES, which was arbitrarily set to 8 since
August 2007 (4 is needed to deal with 2 merge-base case).
However, the updated unpack_trees() code had an advertised limit of 4
(which it enforced). In reality the code was prepared to take only 3
trees and giving 4 caused it to stomp on its stack. Rename the MAX_TREES
constant to MAX_UNPACK_TREES, move it to the unpack-trees.h common header
file, and use it from both places to avoid future confusion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When skip_unmerged option is not given, unpack_trees() should not just
skip unmerged cache entries but keep them in the result for the caller to
sort them out.
For callers other than diff-index, the incoming index should never be
unmerged, but diff-index is a special case caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were few places where merge errors detected deeper in the call chain
were ignored and not propagated up the callchain to the caller.
Most notably, this caused switching branches with "git checkout" to ignore
a path modified in a work tree are different between the HEAD version and
the commit being switched to, which it internally notices but ignores it,
resulting in an incorrect two-way merge and loss of the change in the work
tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a "discard_index(&o->result)" to the failure path, to reclaim
memory from an in-core index we built but ended up not using.
The *big* memory leak comes from the fact that we leak the cache_entry
things left and right. That's a very traditional and deliberate leak:
because we used to build up the cache entries by just mapping them
directly in from the index file (and we emulate that in modern times
by allocating them from one big array), we can't actually free them
one-by-one.
So doing the "discard_index()" will free the hash tables etc, which is
good, and it will free the "istate->alloc" but that is never set on the
result because we don't get the result from the index read. So we don't
actually free the individual cache entries themselves that got created
from the trees.
That's not something new, btw. We never did. But some day we should just
add a flag to the cache_entry() that it's a "free one by one" kind, and
then we could/should do it. In the meantime, this one-liner will fix
*some* of the memory leaks, but not that old traditional one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will always unpack into our own internal index, but we will take the
source from wherever specified, and we will optionally write the result
to a specified index (optionally, because not everybody even _wants_ any
result: the index diffing really wants to just walk the tree and index
in parallel).
This ends up removing a fair number more lines than it adds, for the
simple reason that we can now skip all the crud that tried to be
oh-so-careful about maintaining our position in the index as we were
traversing and modifying it. Since we don't actually modify the source
index any more, we can just update the 'o->pos' pointer without worrying
about whether an index entry got removed or replaced or added to.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just a very mechanical conversion, and makes everybody set it to
'&the_index' before calling, but at least it makes it more explicit
where we work with the index.
The next stage would be to split that index usage up into a 'source' and
a 'destination' index, so that we can unpack into a different index than
we started out from.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This not only deletes more code than it adds, it gets rid of a
singularly hard-to-understand function (unpack_trees_rec()), and
replaces it with a set of smaller and simpler functions that use the
generic tree traversal mechanism to walk over one or more git trees in
parallel.
It's still not the most wonderful interface, and by no means is the new
code easy to understand either, but it's at least a bit less opaque.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
So I find it irritating when git thinks for a long time without telling me
what's taking so long. And by "long time" I definitely mean less than two
seconds, which is already way too long for me.
This hits me when doing a large pull and the checkout takes a long time,
or when just switching to another branch that is old and again checkout
takes a while.
Now, git read-tree already had support for the "-v" flag that does nice
updates about what's going on, but it was delayed by two seconds, and if
the thing had already done more than half by then it would be quiet even
after that, so in practice it meant that we migth be quiet for up to four
seconds. Much too long.
So this patch changes the timeout to just one second, which makes it much
more palatable to me.
The other thing this patch does is that "git checkout" now doesn't disable
the "-v" flag when doing its thing, and only disables the output when
given the -q flag. When allowing "checkout -m" to fall back to a 3-way
merge, the users will see the error message from straight "checkout",
so we will tell them that we do fall back to make them look less scary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to just memcpy() the index entry when we copied the stat() and
SHA1 hash information, which worked well enough back when the index
entry was just an exact bit-for-bit representation of the information on
disk.
However, these days we actually have various management information in
the cache entry too, and we should be careful to not overwrite it when
we copy the stat information from another index entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows the caller to reset everything that isn't unmerged,
leaving the unmerged things to be resolved. If, after a merge of
"working" and "HEAD", this is used with "HEAD" (reset, !update), the
result will be that all of the changes from "local" are in the working
tree but not added to the index (either with the index clean but
unchanged, or with the index unmerged, depending on whether there are
conflicts).
This will be used in checkout -m.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Way back in read-tree.c, we used a mode 0 cache entry to indicate that
an entry had been deleted, so that the update code would remove the
working tree file, and we would just skip it when writing out the
index file afterward.
These days, unpack_trees is a library function, and it is still
leaving these entries in the active cache. Furthermore, unpack_trees
doesn't correctly ignore those entries, and who knows what other code
wouldn't expect them to be there, but just isn't yet called after a
call to unpack_trees. To avoid having other code trip over these
entries, have check_updates() remove them after it removes the working
tree files.
While we're at it, simplify the loop in check_updates(), and avoid
passing global variables as parameters to check_updates(): there is
only one call site anyway.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
(This applies only to errors where a plausible operation is impossible due
to the particular data, not to errors resulting from misuse of the merge
functions.)
This will allow builtin-checkout to suppress merge errors if it's
going to try more merging methods.
Additionally, if unpack_trees() returns with an error, but without
printing anything, it will roll back any changes to the index (by
rereading the index, currently). This obviously could be done by the
caller, but chances are that the caller would forget and debugging
this is difficult. Also, future implementations may give unpack_trees() a
more efficient way of undoing its changes than the caller could.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Return an error from unpack_trees() instead of calling die(), and exit
with an error in read-tree, builtin-commit, and diff-lib. merge-recursive
already expected an error return from unpack_trees, so it doesn't need to
be changed. The merge function can return negative to abort.
This will be used in builtin-checkout -m.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
