* ks/maint-1.6.0-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
"git read-tree A B C..." without the "-m" (merge) option is a way to read
these trees on top of each other to get an overlay of them.
An ancient commit ee6566e (Rewrite read-tree, 2005-09-05) passed the
ADD_CACHE_SKIP_DFCHECK flag when calling add_index_entry() to add the
paths obtained from these trees to the index, but it is an incorrect use
of the flag. The flag is meant to be used by callers who know the
addition of the entry does not introduce a D/F conflict to the index in
order to avoid the overhead of checking.
This bug resulted in a bogus index that records both "x" and "x/z" as a
blob after reading three trees that have paths ("x"), ("x", "y"), and
("x/z", "y") respectively. 34110cd (Make 'unpack_trees()' have a separate
source and destination index, 2008-03-06) refactored the callsites of
add_index_entry() incorrectly and added more codepaths that use this flag
when it shouldn't be used.
Also, 0190457 (Move 'unpack_trees()' over to 'traverse_trees()' interface,
2008-03-05) introduced a bug to call add_index_entry() for the tree that
does not have the path in it, passing NULL as a cache entry. This caused
reading multiple trees, one of which has path "x" but another doesn't, to
segfault.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3e0c4ff (send-email: respect in-reply-to regardless of threading,
2009-03-01) fixed the handling of the In-Reply-To header when both
--no-thread and --in-reply-to are in effect. Add a test for it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-send-email:
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* mg/maint-submodule-normalize-path:
git submodule: Fix adding of submodules at paths with ./, .. and //
git submodule: Add test cases for git submodule add
* tr/format-patch-thread:
format-patch: support deep threading
format-patch: thread as reply to cover letter even with in-reply-to
format-patch: track several references
format-patch: threading test reactivation
Conflicts:
builtin-log.c
* tr/gcov:
Test git-patch-id
Test rev-list --parents/--children
Test log --decorate
Test fsck a bit harder
Test log --graph
Test diff --dirstat functionality
Test that diff can read from stdin
Support coverage testing with GCC/gcov
LoadModule directive for log_config_module will not work if the module is
built-in.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, the rsync tests were disabled by default, as they needed a
running rsyncd daemon. This was only due to the limitation that our
rsync transport only allowed full URLs of the form
rsync://<host>/<path>
Relaxing the URLs to allow
rsync:<path>
permitted the change in the tests to run whenever rsync is available,
without requiring a fully configured and running rsyncd.
While at it, the tests were fixed so that they run in directories with a
space in their name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log_config module is needed for at least some versions of apache to
support the LogFormat directive.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The latter topic changes the definition of how refspec's src and dst side
is stored in-core; it used to be that the asterisk for pattern was
omitted, but now it is included. The former topic handcrafts an old style
refspec to feed the refspec matching machinery that lacks the asterisk and
triggers an error.
This resolves the semantic clash between the two topics early before they
need to be merged to integration branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
builtin-revert.c: release index lock when cherry-picking an empty commit
document config --bool-or-int
t1300: use test_must_fail as appropriate
cleanup: add isascii()
Documentation: fix badly indented paragraphs in "--bisect-all" description
When launching "diff --no-index" with a parameter "/dev/null", the MSys
bash converts the "/dev/null" to a "nul", which usually makes sense. But
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define GIT_TEST_CLONE_2GB=t if you want the test not to be skipped.
The test works by constructing a repository larger than 2gb, and then
cloning it.
The repository is forced larger than 2gb by setting compression and
delta depth to zero, and then adding just enough unique objects of
a given size.
The objects consist of a running decimal number in ASCII, padded by
spaces. Should that break in the future, e.g. when pack v4 becomes
default, there is a commented-out call to test-genrandom which can be
substituted, but that uses more cycles than the current method.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ce8e880 converted ls-files to use parseopt; the
--no-empty-directory option was converted as an
OPT_BIT for "empty-directory" to set the
DIR_HIDE_EMPTY_DIRECTORY flag. However, that makes it do the
opposite of what it should: --empty-directory would hide,
but --no-empty-directory would turn off hiding.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These ancient tests predate test_cmp.
While we're at it, let's switch to our usual "expected
before actual" order of arguments; this makes the diff
output "here's what is changed from expected" instead of the
reverse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick of an empty commit is done, release the lock
held on the index.
The fix is the same as was applied to similar code in 4271666046.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to keep the requirements strict, each * has to be a full path
component, and there may only be one * per side. This requirement is
enforced entirely by check_ref_format(); the matching implementation
will substitute the whatever matches the * in the lhs for the * in the
rhs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests checked the exit code manually, even going
so far as to run git outside of the test_expect harness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/pretty-format:
bash completion: add --format= and --oneline options for "git log"
Add tests for git log --pretty, --format and --oneline.
Add --oneline that is a synonym to "--pretty=oneline --abbrev-commit"
Give short-hands to --pretty=tformat:%formatstring
Add --format that is a synonym to --pretty
* js/send-email:
send-email: add --confirm option and configuration setting
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* js/branch-symref:
add basic branch display tests
branch: clean up repeated strlen
Avoid segfault with 'git branch' when the HEAD is detached
builtin-branch: improve output when displaying remote branches
Conflicts:
builtin-branch.c
* js/valgrind:
valgrind: do not require valgrind 3.4.0 or newer
test-lib: avoid assuming that templates/ are in the GIT_EXEC_PATH
Tests: let --valgrind imply --verbose and --tee
Add a script to coalesce the valgrind outputs
t/Makefile: provide a 'valgrind' target
test-lib.sh: optionally output to test-results/$TEST.out, too
Valgrind support: check for more than just programming errors
valgrind: ignore ldso and more libz errors
Add valgrind support in test scripts
When archiving a repository there is no way to specify a file as output.
This patch adds a new option "--output" that redirects the output to a
file instead of stdout.
Signed-off-by: Carlos Manuel Duclos Vergara <carlos.duclos@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-clone creates an initial branch it was not checking the
branch.autosetuprebase configuration option (which may exist in
~/.gitconfig). Refactor the code used by "git branch" to create
a new branch, and use it instead of the insufficiently duplicated code
in builtin-clone.
Changes are partly, and the test is mostly, based on the previous work by
Pat Notz.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'git submodule add' normalize the submodule path in the
same way as 'git ls-files' does, so that 'git submodule init' looks up
the information in .gitmodules with the same key under which 'git
submodule add' stores it.
This fixes 4 known breakages.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add simple test cases for adding and initialising submodules. The
init step is necessary in order to verify the added information.
The second test exposes a known breakage due to './' in the path: git
ls-files simplifies the path but git add does not, which leads to git
init looking for different lines in .gitmodules than git add adds.
The other tests add test cases for '//' and '..' in the path which
currently fail for the same reason.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When picking commits whose parents have not changed, we do not need to
rewrite the commit. We do not need to reset the working directory to
the parent's state, either.
Requested by Sverre Rabbelier.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mental model for clone is that the branch is "checked
out" (and it even says this in Documentation/git-clone.txt:
"...creates and checks out an initial branch"). Therefore it
is reasonable for users to expect that any post-checkout
hook would be run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this will break things for some extremely rare repositories
used by broken Windows clients, it's probably not worth enabling this by
default as it has negatively affected many more users than it has helped
from what we've seen so far.
The extremely rare repositories that have broken symlinks in them will be
silently corrupted in import; but users can still reenable this option and
restart the import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing output of "git remote show <remote>" with respect to push
ref specs is basically just to show the raw refspec. This patch teaches
the command to interpret the refspecs and show how each branch will be
pushed to the destination. The output gives the user an idea of what
"git push" should do if it is run w/o any arguments.
Example new output:
1a. Typical output with no push refspec (i.e. matching branches only)
$ git remote show origin
* remote origin
[...]
Local refs configured for 'git push':
master pushes to master (up to date)
next pushes to next (local out of date)
1b. Same as above, w/o querying the remote:
$ git remote show origin -n
* remote origin
[...]
Local ref configured for 'git push' (status not queried):
(matching) pushes to (matching)
2a. With a forcing refspec (+), and a new topic
(something like push = refs/heads/*:refs/heads/*):
$ git remote show origin
* remote origin
[...]
Local refs configured for 'git push':
master pushes to master (fast forwardable)
new-topic pushes to new-topic (create)
next pushes to next (local out of date)
pu forces to pu (up to date)
2b. Same as above, w/o querying the remote
$ git remote show origin -n
* remote origin
[...]
Local refs configured for 'git push' (status not queried):
master pushes to master
new-topic pushes to new-topic
next pushes to next
pu forces to pu
3. With a remote configured as a mirror:
* remote backup
[...]
Local refs will be mirrored by 'git push'
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing output of "git remote show <remote>" is too verbose for the
information it provides. This patch teaches it to provide more
information in less space.
The output for push refspecs is addressed in the next patch.
Before the patch:
$ git remote show origin
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: master
Remote branch merged with 'git pull' while on branch master
master
Remote branch merged with 'git pull' while on branch next
next
Remote branches merged with 'git pull' while on branch octopus
foo bar baz frotz
New remote branch (next fetch will store in remotes/origin)
html
Stale tracking branch (use 'git remote prune')
bogus
Tracked remote branches
maint
man
master
next
pu
todo
After this patch:
$ git remote show origin
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: master
Remote branches:
bogus stale (use 'git remote prune' to remove)
html new (next fetch will store in remotes/origin)
maint tracked
man tracked
master tracked
next tracked
pu tracked
todo tracked
Local branches configured for 'git pull':
master rebases onto remote master
next rebases onto remote next
octopus merges with remote foo
and with remote bar
and with remote baz
and with remote frotz
$ git remote show origin -n
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: (not queried)
Remote branches: (status not queried)
bogus
maint
man
master
next
pu
todo
Local branches configured for 'git pull':
master rebases onto remote master
next rebases onto remote next
octopus merges with remote foo
and with remote bar
and with remote baz
and with remote frotz
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual method for determining the ref pointed to by HEAD
is to compare HEAD's sha1 to the sha1 of all refs, trying to
find a unique match.
However, some transports actually get to look at HEAD
directly; we should make use of that information when it is
available. Currently, only http remotes support this
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a porcelain command for setting and deleting
$GIT_DIR/remotes/<remote>/HEAD.
While we're at it, document what $GIT_DIR/remotes/<remote>/HEAD is all
about.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for teaching remote how to set
refs/remotes/<remote>/HEAD to match what HEAD is set to at <remote>, but
is useful in its own right.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remote and stale branches are emitted in alphabetical order, but new and
tracked branches are not. So sort the latter to be consistent with the
former. This also lets us use more efficient string_list_has_string()
instead of unsorted_string_list_has_string().
"show <remote>" prunes symrefs, but "show <remote> -n" does not. Fix the
latter to match the former.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "bad" commit was also "skip"ped and when more than one
commit was skipped, the "filter_skipped" function would have
printed something like:
bisect_rev=<hash1>|<hash2>
(where <hash1> and <hash2> are hexadecimal sha1 hashes)
and this would have been evaled later as piping "bisect_rev=<hash1>"
into "<hash2>", which would have failed.
So this patch makes the "filter_skipped" function properly quote
what it outputs, so that it will print something like:
bisect_rev='<hash1>|<hash2>'
which will be properly evaled later. The caller was not stopping
properly because the scriptlet this function returned to be evaled
was not strung together with && and because of this, an error in
an earlier part of the output was simply ignored.
A test case is added to the test suite.
And while at it, we also initialize the VARS, FOUND and TRIED
variables, so that we protect ourselves from environment variables
the user may have with these names.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OS X's GNU grep does not support -P/--perl-regexp.
We use a basic RE instead, and simplify the pattern slightly by
replacing '+' with '*' so it can be more easily expressed using a basic
RE. The important part of pattern, checking for a SHA-1 has suffix in
the successful PUT/MOVE operations, remains the same. Also, a-z instead
of a-f was an obvious mistake in the original RE. Here are samples of
what we want to match:
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "PUT /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "MOVE /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was mostly being tested implicitly by the "http push"
tests. But making a separate test script means that:
- we will run fetch tests even when http pushing support
is not built
- when there are failures on fetching, they are easier to
see and isolate, as they are not in the middle of push
tests
This script defaults to running the webserver on port 5550,
and puts the original t5540 on port 5540, so that the two
can be run simultaneously without conflict (but both still
respect an externally set LIB_HTTPD_PORT).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some redirects and some error checking that need
to be done by the caller; let's move both into the
start_httpd function so that all callers don't have to
repeat them (there is only one caller now, but another will
follow in this series).
This doesn't violate any assumptions that aren't already
being made by lib-httpd, which is happy to say "skipping"
and call test_done for a number of other cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with
8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows the HTTP tests to run on OS X 10.5. It is not
sufficient to be able to pass in LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH alone, as the apache.conf also needs a couple
tweaks.
These changes are put into an <IfDefine> to keep them Darwin specific,
but this means lib-httpd.sh needs to be modified to pass -DDarwin to
apache when running on Darwin. As long as we're making this change to
lib-httpd.sh, we may as well set LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH to appropriate default values for the platform.
Note that we now pass HTTPD_PARA to apache at shutdown as well.
Otherwise apache will emit a harmless, but noisy warning that LogFormat
is an unknown directive.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More specifically; --pretty=format, tformat and new %foo shortcut.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Original bug report and test case by Björn Steinbrink.
Björn Steinbrink <B.Steinbrink@gmx.de> wrote:
> Hi Eric,
>
> seems that the empty symlink stuff gets confused about which revision to
> use when looking for the parent's file.
>
> r3 = f1a6fcf6b0a1c4a373d0b2b65a3d70700084f361 (tags/1.0.1)
> Found possible branch point: file:///home/doener/h/svn/tags/1.0 => file:///home/doener/h/svn/branches/1.0, 4
> Found branch parent: (1.0) 63ae640ba01014ecbb3df590999ed1fa5914545b
> Following parent with do_switch
> Successfully followed parent
> r5 = 26fcfef5bcced97ab74faf1af7341a2ae0d272aa (1.0)
> Found possible branch point: file:///home/doener/h/svn/branches/1.0 => file:///home/doener/h/svn/tags/1.0.1, 5
> Found branch parent: (tags/1.0.1) 26fcfef5bcced97ab74faf1af7341a2ae0d272aa
> Following parent with do_switch
> Scanning for empty symlinks, this may take a while if you have many empty files
> You may disable this with `git config svn.brokenSymlinkWorkaround false'.
> This may be done in a different terminal without restarting git svn
> Filesystem has no item: File not found: revision 3, path '/branches/1.0/file' at /usr/local/libexec/git-core/git-svn line 3318
>
> Note how it tries to look at revision 3 instead of revision 5 (which it
> correctly detected as the parent). The import succeeds when
> svn.brokenSymlinkWorkaround is set to false. Testcase below.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
For deep threading mode, i.e., the mode that gives a thread structured
like
+ [PATCH 0/n] Cover letter
`-+ [PATCH 1/n] First patch
`-+ [PATCH 2/n] Second patch
`-+ ...
we currently have to use 'git send-email --thread' (the default). On
the other hand, format-patch also has a --thread option which gives
shallow mode, i.e.,
+ [PATCH 0/n] Cover letter
|-+ [PATCH 1/n] First patch
|-+ [PATCH 2/n] Second patch
...
To reduce the confusion resulting from having two indentically named
features in different tools giving different results, let format-patch
take an optional argument '--thread=deep' that gives the same output
as 'send-mail --thread'. With no argument, or 'shallow', behave as
before. Also add a configuration variable format.thread with the same
semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, format-patch --thread --cover-letter --in-reply-to $parent
makes all mails, including the cover letter, a reply to $parent.
However, we would want the reader to consider the cover letter above
all the patches.
This changes the semantics so that only the cover letter is a reply to
$parent, while all the patches are formatted as replies to the cover
letter.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, git-patch-id was untested. Add some simple checks for output
format and patch (in)equality.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-fsck, of all tools, has very few tests. This adds some more:
* a corrupted object;
* a branch pointing to a non-commit;
* a tag pointing to a nonexistent object;
* and a tag pointing to an object of a type other than what the tag
itself claims.
Only the first two are caught. At least the third probably should,
too, but currently slips through.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far there were no tests checking that log --graph actually works.
Note that the tests strip trailing whitespace, as the current --graph
emits trailing whitespace on lines that do not contain anything but
graph lines.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is only a very rudimentary test, but it was untested before.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function strip_path_suffix() will try to strip a given suffix from
a given path. The suffix must start at a directory boundary (i.e. "core"
is not a path suffix of "libexec/git-core", but "git-core" is).
Arbitrary runs of directory separators ("slashes") are assumed identical.
Example:
strip_path_suffix("C:\\msysgit/\\libexec\\git-core",
"libexec///git-core", &prefix)
will set prefix to "C:\\msysgit" and return 0.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4014 tests format-patch --thread since 7d812145, but the tests were
ineffective right from the start at least for bash and dash. The
loops of the form
for ...; do something || break; done
introduced by 7d812145 and 5d02294 always exit with status 0, even if
'something' failed, because 'break' returns 0 unless there was no loop
to break.
We take a rather different approach that uses an admittedly heinous
inline Perl script to mangle all interesting information into a format
that is invariant between runs. We can then test the full patch
sequence in one go (with --stdout), doing away with the loop problem.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were not testing the output of "git branch" anywhere.
Not only does this not protect us against regressions in the
output, but we are not exercising code paths which may have
bugs (such as the one fixed by 45e2b61).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
Some shells do not like "export var=val"; the right way to write
it is to do an assignment and then export just the variable name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The improved error handling catches a bug in filter-branch when using
-d pointing to a path outside any git repository:
$ git filter-branch -d /tmp/foo master
fatal: Not a git repository (or any of the parent directories): .git
This error message comes from git for-each-ref in line 224. GIT_DIR is
set correctly by git-sh-setup (to the foo.git repository), but not
exported (yet).
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We display empty diffs for files whose timestamps have changed.
Usually, refreshing the index makes those empty diffs go away.
However, when not using the index they are not very useful and
there is no option to suppress them.
This forces on the skip_stat_unmatch option for diff --no-index,
suppressing any empty diffs. This option is also used for diffs
against the index when "diff.autorefreshindex" is set, but that
option does not apply to diff --no-index.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a feature like "blame" is permitted to be overridden in the
repository configuration but it is not actually set in the repository,
a warning is emitted due to the undefined value of the repository
configuration, even though it's a perfectly normal condition.
Emitting warning is grounds for test failure in the gitweb test
script.
This error was caused by rewrite of git_get_project_config from using
"git config [<type>] <name>" for each individual configuration
variable checked to parsing "git config --list --null" output in
commit b201927 (gitweb: Read repo config using 'git config -z -l').
Earlier version of git_get_project_config was returning empty string
if variable do not exist in config; newer version is meant to return
undef in this case, therefore change in feature_bool was needed.
Additionally config_to_* subroutines were meant to be invoked only if
configuration variable exists; therefore we added early return to
git_get_project_config: it now returns no value if variable does not
exists in config. Otherwise config_to_* subroutines (config_to_bool
in paryicular) wouldn't be able to distinguish between the case where
variable does not exist and the case where variable doesn't have value
(the "[section] noval" case, which evaluates to true for boolean).
While at it fix bug in config_to_bool, where checking if $val is
defined (if config variable has value) was done _after_ stripping
leading and trailing whitespace, which lead to 'Use of uninitialized
value' warning.
Add test case for features overridable but not overriden in repo
config, and case for no value boolean configuration variable.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CGI::url() has some issues when rebuilding the script URL if the script
is a DirectoryIndex.
One of these issue is the inability to strip PATH_INFO, which is why
we had to do it ourselves.
Another issue is that the resulting URL cannot be used for the <base>
tag: it works if we're the DirectoryIndex at the root level, but not
otherwise.
We fix this by building the proper base URL ourselves, and improve the
comment about the need to strip PATH_INFO manually while we're at it.
Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified
to set SCRIPT_NAME variable (CGI standard states that it MUST be set,
and now gitweb uses it if PATH_INFO is not empty, as is the case for
some of tests in t9500).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ms/mailmap:
Move mailmap documentation into separate file
Change current mailmap usage to do matching on both name and email of author/committer.
Add map_user() and clear_mailmap() to mailmap
Add find_insert_index, insert_at_index and clear_func functions to string_list
Add mailmap.file as configurational option for mailmap location
After 753bc91 ("Remove the requirement opaquelocktoken uri scheme"),
lock tokens are in the URI forms in which they are received from the
server, eg. 'opaquelocktoken:', 'urn:uuid:'.
However, "start_put" (and consequently "start_move"), which attempts to
create a unique temporary file using the UUID of the lock token,
inadvertently uses the lock token in its URI form. These file
operations on the server may not be successful (specifically, in
Windows), due to the colon ':' character from the URI form of the lock
token in the file path.
This patch uses a hash of the lock token instead, guaranteeing only
"safe" characters (a-f, 0-9) are used in the file path.
The token's hash is generated when the lock token is received from the
server in handle_new_lock_ctx, minimizing the number of times of
hashing.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git format-patch is given multiple --cc arguments, it generates a
Cc header that looks like:
Cc: first@example.com,
second@example.com,
third@example.com
Before this commit, send-email was unable to handle such a message as it
did not handle folded header lines, nor multiple recipients in a Cc
line.
This patch:
- Unfolds header lines by pre-processing the header before extracting
any of its fields.
- Handles Cc lines with multiple recipients.
- Adds use of Mail::Address if available for splitting Cc line and
the "Who should the emails be sent to?" prompt", with fall back to
existing split_addrs() function.
- Tests the new functionality and adds two tests for detecting whether
"From:" appears correctly in message body when patch author differs
from patch sender.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend t1500 with tests of 'git rev-parse --git-dir' when invoked from
other directories of the repository or the work tree.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 72183cb2 (Fix gitdir detection when in subdir of
gitdir, 2009-01-16) added a test to 't1501-worktree' to check the
behaviour of 'git rev-parse --git-dir' in a special case. However,
t1501 is about testing separate work tree setups, and not about basic
'rev-parse' functionality, which is tested in t1500-rev-parse.
Therefore, this patch moves that test to t1500.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, "git gc --no-prune" will not prune any loose (and
dangling) object, and "git gc --prune=5.minutes.ago" will prune
all loose objects older than 5 minutes.
This patch benefitted from suggestions by Thomas Rast and Jan Krï¿œger.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1.6.2 will have @{-1} syntax advertised as "usable anywhere you can use
a branch name". However, "git merge @{-1}" did not work.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the new "@{-1} syntax to refer to the previous branch to "git
branch". After looking at somebody's faulty patch series on a topic
branch too long, if you decide it is not worth merging, you can just say:
$ git checkout master
$ git branch -D @{-1}
to get rid of it without having to type the name of the topic you now hate
so much for wasting a lot of your time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit afe5d3d5 introduced a safety valve to symbolic-ref to
disallow installing an invalid HEAD. It was accompanied by
b229d18a, which changed validate_headref to require that
HEAD contain a pointer to refs/heads/ instead of just refs/.
Therefore, the safety valve also checked for refs/heads/.
As it turns out, topgit is using refs/top-bases/ in HEAD,
leading us to re-loosen (at least temporarily) the
validate_headref check made in b229d18a. This patch does the
corresponding loosening for the symbolic-ref safety valve,
so that the two are in agreement once more.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --abbrev-commit' added an ellipsis to all commit names that
were abbreviated. This was particularly annoying if you wanted to
cut&paste the sha1 from the terminal, since selecting by word would
pick up '...' too.
So use find_unique_abbrev() instead of diff_unique_abbrev() in all
log-related commit sha1 printing routines, and also change the
formatting of the 'Merge: parent1 parent2' line output via
pretty_print_commit().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "cloning from an empty repository", we have a configuration to
describe the remote's URL and the default ref mappings, but we lack the
branch configuration for the default branch we create on our end,
"master".
It is likely that the empty repository we cloned from will point the
default "master" branch with its HEAD, so prepare the local configuration
to match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is more than one file that are changed, running git diff with
GIT_EXTERNAL_DIFF incorrectly diagnoses an programming error and dies.
The check introduced in 479b0ae (diff: refactor tempfile cleanup handling,
2009-01-22) to detect a temporary file slot that forgot to remove its
temporary file was inconsistent with the way the codepath to remove the
temporary to mark the slot that it is done with it.
This patch fixes this problem and adds a test case for it.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"\" was treated differently in exclude rules depending on whether a
wildcard match was done. For wildcard rules, "\" was de-escaped in
fnmatch, but this was not done for other rules since they used strcmp
instead. A file named "#foo" would not be excluded by "\#foo", but would
be excluded by "\#foo*".
We now treat all rules with "\" as wildcard rules.
Another solution could be to de-escape all non-wildcard rules as we
read them, but we would have to do the de-escaping exactly as fnmatch
does it to avoid inconsistencies.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9273b56 (filter-branch: Fix fatal error on bare repositories, 2009-02-03)
fixed a missing check of return status from an underlying command in
git-filter-branch, but there still are places that do not check errors.
For example, the command does not pay attention to the exit status of the
command given by --commit-filter. It should abort in such a case.
This attempts to fix all the remaining places that fails to checks errors.
In two places, I've had to break apart pipelines in order to check the
error code for the first stage of the pipeline, as discussed here:
http://kerneltrap.org/mailarchive/git/2009/1/28/4835614
Feedback on this patch was provided by Johannes Sixt, Johannes Schindelin
and Junio C Hamano. Thomas Rast helped with pipeline error handling.
Signed-off-by: Eric Kidd <git@randomhacks.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
test case for regression caused by git-svn empty symlink fix
git-svn: fix broken symlink workaround when switching branches
git-svn: Print revision while searching for earliest use of path
git-svn: abstract out a block into new method other_gs()
git-svn: allow disabling expensive broken symlink checks
Commit dbc6c74d08 "git-svn: handle empty
files marked as symlinks in SVN" caused a regression in an unusual case
where a branch has been created in SVN, later deleted and then created
again from another branch point and the original branch point had empty
files not in the new branch. In some cases git svn fetch will then fail
while trying to fetch the empty file from the wrong SVN revision.
This adds a test case that reproduces the issue.
[ew: added additional test to ensure file was created correctly
made test file executable ]
Signed-off-by: Anton Gyllenberg <anton@iki.fi>
Acked-by: Eric Wong <normalperson@yhbt.net>
Since dbc6c74d08, git-svn has had
an expensive check for broken symlinks that exist in some
repositories. This leads to a heavy performance hit on
repositories with many empty blobs that are not supposed to be
symlinks.
The workaround is enabled by default; and may be disabled via:
git config svn.brokenSymlinkWorkaround false
Reported by Markus Heidelberg.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
cc0e6c5 (Handle return code of parse_commit in revision machinery,
2007-05-04) attempted to tighten error checking in the revision machinery,
but it wasn't enough. When get_revision_1() was asked for the next commit
to return, it tries to read and simplify the parents of the commit to be
returned, but an error while doing so was silently ignored and reported as
a truncated history to the caller instead.
This resulted in an early end of "git log" output or a pack that lacks
older commits from "git pack-objects", without any error indication in the
exit status from these commands, even though the underlying parse_commit()
issues an error message to the end user.
Note that the codepath in add_parents_list() that paints parents of an
UNINTERESTING commit UNINTERESTING silently ignores the error when
parse_commit() fails; this is deliberate and in line with aeeae1b
(revision traversal: allow UNINTERESTING objects to be missing,
2009-01-27).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a companion patch to the recent 3d95d92 (receive-pack: explain
what to do when push updates the current branch, 2009-01-31).
Deleting the current branch from a remote will result in the next clone
from it not check out anything, among other things. It also is one of the
cause that makes remotes/origin/HEAD a dangling symbolic ref. This patch
still allows the traditional behaviour but with a big warning, and promises
that the default will change to 'refuse' in a future release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one squelched the diagnositic message we used to issue every
time we enumerated the refs and noticed a dangling ref. This adds the
warning back to the place where the user actually attempts to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you prune from the remote "frotz" that deleted the ref your tracking
branch remotes/frotz/HEAD points at, the symbolic ref will become
dangling. We used to detect this as an error condition and issued a
message every time refs are enumerated.
This stops the error message, but moves the warning to "remote prune".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests checked for failure by hand without using test_must_fail (they
probably predate the shell function).
When we know the desired outcome, explicitly check for it, instead of
checking if the result does not match one possible incorrect outcome.
E.g. if you expect a push to be refused, you do not test if the result is
different from what was pushed. Instead, make sure that the ref did not
before and after the push.
The test sequence chdir'ed around and any failure at one point could have
started the next test in an unexpected directory. Fix this problem by
using subshells as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-1.6.0-path-normalize:
Remove unused normalize_absolute_path()
Test and fix normalize_path_copy()
Fix GIT_CEILING_DIRECTORIES on Windows
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
Make test-path-utils more robust against incorrect use
This allows us to augment the repo mailmap file, and to use
mailmap files elsewhere than the repository root. Meaning
that the entries in mailmap.file will override the entries
in "./.mailmap", should they match.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, when you called
git submodule some/bogus/path
Git would silently ignore the path, without warning the user about the
likely mistake. Now it does.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tab completion makes it easy to add a trailing slash to a submodule path.
As it is completely clear what the user actually wanted to say, be nice
and strip that slash at the end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the test-path-utils utility to invoke normalize_path_copy()
instead of normalize_absolute_path() because the latter is about to be
removed.
The test cases in t0060 are adjusted in two regards:
- normalize_path_copy() more often leaves a trailing slash in the result.
This has no negative side effects because the new user of this function,
longest_ancester_length(), already accounts for this behavior.
- The function can fail.
The tests uncover a flaw in normalize_path_copy(): If there are
sufficiently many '..' path components so that the root is reached, such as
in "/d1/s1/../../d2", then the leading slash was lost. This manifested
itself that (assuming there is a repository at /tmp/foo)
$ git add /d1/../tmp/foo/some-file
reported 'pathspec is outside repository'. This is now fixed.
Moreover, the test case descriptions of t0060 now include the test data and
expected outcome.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using git with GIT_CEILING_DIRECTORIES crashed on Windows due to a failed
assertion in normalize_absolute_path(): This function expects absolute
paths to start with a slash, while on Windows they can start with a drive
letter or a backslash.
This fixes it by using the alternative, normalize_path_copy() instead,
which can handle Windows-style paths just fine.
Secondly, the portability macro PATH_SEP is used instead of expecting
colons to be used as path list delimiter.
The test script t1504 is also changed to help MSYS's bash recognize some
program arguments as path list. (MSYS's bash must translate POSIX-style
path lists to Windows-style path lists, and the heuristic did not catch
some cases.)
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/filter-branch-submodule:
filter-branch: do not consider diverging submodules a 'dirty worktree'
filter-branch: Fix fatal error on bare repositories
In cd_to_toplevel, instead of 'cd $(unset PWD; /bin/pwd)/$path'
use 'cd -P $path'. The "-P" option yields a desirable similarity to
C chdir.
While the "-P" option may be slightly less commonly supported than
/bin/pwd, it is more concise, better tested, and less error prone.
I've already added the 'unset PWD' to fix the /bin/pwd solution on
BSD; there may be more edge cases out there.
This still passes all the same test cases in t5521-pull-symlink.sh and
t2300-cd-to-toplevel.sh, even before updating them to use 'pwd -P'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-remote-remove-mirror:
builtin-remote: make rm operation safer in mirrored repository
builtin-remote: make rm() use properly named variable to hold return value
* js/notes:
git-notes: fix printing of multi-line notes
notes: fix core.notesRef documentation
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
pretty.c
* cb/mergetool:
mergetool: fix running mergetool in sub-directories
mergetool: Add a test for running mergetool in a sub-directory
mergetool: respect autocrlf by using checkout-index
Valgrind 3.4.0 is pretty new, and even if --track-origins is a nice
feature, it is not the end of the world if that is not available. So
play nice and use that option only when only an older version of
valgrind is available.
In the same spirit, refrain from the use of '...' in suppression
files, which is also a feature only valgrind 3.4 and newer understand.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
urls.txt: document optional port specification in git URLS
builtin-mv.c: check for unversionned files before looking at the destination.
Add a testcase for "git mv -f" on untracked files.
Missing && in t/t7001.sh.
* maint-1.6.0:
builtin-mv.c: check for unversionned files before looking at the destination.
Add a testcase for "git mv -f" on untracked files.
Missing && in t/t7001.sh.
The previous code was failing in the case where one moves an
unversionned file to an existing destination, with mv -f: the
"existing destination" was checked first, and the error was cancelled
by the force flag.
We now check the unrecoverable error first, which fixes the bug.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, the exit status is only the one of the last line.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rm <repo>" happily removes non-remote refs and their reflogs.
This may be okay if the repository truely is a mirror, but if the user
had done "git remote add --mirror <repo>" by accident and was just
undoing their mistake, then they are left in a situation that is
difficult to recover from.
After this commit, "git remote rm" skips over non-remote refs. The user
is advised on how remove branches using "git branch -d", which itself
has nice safety checks wrt to branch removal lacking from "git remote rm".
Non-remote non-branch refs are skipped silently.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make much sense to run the (expensive) valgrind tests and
not look at the output.
To prevent output from scrolling out of reach, the parameter --tee is
implied, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running the valgrind tests with GIT_TEST_TREE=t, the test output
is in the test-results/$TEST.out files.
Call ./valgrind/analyze.sh in $GIT_ROOT/t/ to group the valgrind errors
by backtrace.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to forget running valgrinded tests without -v, and it is
also easy to forget to redirect the output to "tee" (lest the output
scroll out of the terminal's buffer). Running "make valgrind" will
take care of all that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tests are run in parallel and a few tests fail, it does not help
that the output of the terminal is totally confusing, as you rarely know
which test which line came from.
So introduce the option '--tee' which triggers that the output of the
tests will be written to t/test-results/$TEST.out in addition to the
terminal, where $TEST is the basename of the script.
Unfortunately, there seems to be no way to redirect a given file
descriptor to a specified subprocess in POSIX shell, only redirection
to a file is supported via 'exec > $FILE'.
At least with bash, one might think that 'exec >($COMMAND)' would work
as intended, but it does not.
The common way to work around the lack of proper tools support is to
work with named pipes, alas, one of our most beloved platforms does not
really support named pipes. Besides, we would need a pipe for every
script, as the whole point of this patch is to allow parallel execution.
Therefore, we handle the redirection in the following way: when '--tee'
was passed to the test script, the variable GIT_TEST_TEE_STARTED is set
(to avoid triggering that code path again) and the script is started
_again_, in a subshell, redirected to the command "tee".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes --valgrind try to override _all_ Git binaries in the
PATH, and it makes it an error to call *.sh and *.perl scripts directly.
While it is not strictly necessary to look through the whole PATH to
find git binaries to override, it is in line with running an expensive
test (which valgrind is) to make extra sure that only binaries are
tested that actually come from the git.git checkout.
In the same spirit, we can test that neither our test suite nor our
scripts try to run the *.sh or *.perl scripts directly.
It's more like a "because we can" than a "this is tightly connected
to valgrind", but in the author's opinion "because we can" is "so we
should" in this case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some Linux systems, we get a host of Cond and Addr errors
from calls to dlopen that are caused by nss modules. We
should be able to safely ignore anything happening in
ld-*.so as "not our problem."
[Johannes: I added some more... unfortunately using valgrind 3.4.0 syntax]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the ability to use valgrind's memcheck tool to
diagnose memory problems in Git while running the test scripts.
It requires valgrind 3.4.0 or newer.
It works by creating symlinks to a valgrind script, which have the same
name as our Git binaries, and then putting that directory in front of
the test script's PATH as well as set GIT_EXEC_PATH to that directory.
Git scripts are symlinked from that directory directly.
That way, Git binaries called by Git scripts are valgrinded, too.
Valgrind can be used by specifying "GIT_TEST_OPTS=--valgrind" in the
make invocation. Any invocation of git that finds any errors under
valgrind will exit with failure code 126. Any valgrind output will go
to the usual stderr channel for tests (i.e., /dev/null, unless -v has
been specified).
If you need to pass options to valgrind -- you might want to run
another tool than memcheck, for example -- you can set the environment
variable GIT_VALGRIND_OPTIONS.
A few default suppressions are included, since libz seems to trigger
quite a few false positives. We'll assume that libz works and that we
can ignore any errors which are reported there.
Note: it is safe to run the valgrind tests in parallel, as the links in
t/valgrind/bin/ are created using proper locking.
Initial patch and all the hard work by Jeff King.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git filter-branch is run on a bare repository, it prints out a fatal
error message:
$ git filter-branch branch
Rewrite 476c4839280c219c2317376b661d9d95c1727fc3 (9/9)
WARNING: Ref 'refs/heads/branch' is unchanged
fatal: This operation must be run in a work tree
Note that this fatal error message doesn't prevent git filter-branch from
exiting successfully. (Why doesn't git filter-branch actually exit with an
error when a shell command fails? I'm not sure why it was designed this
way.)
This error message is caused by the following section of code at the end of
git-filter-branch.sh:
if [ "$(is_bare_repository)" = false ]; then
unset GIT_DIR GIT_WORK_TREE GIT_INDEX_FILE
test -z "$ORIG_GIT_DIR" || {
GIT_DIR="$ORIG_GIT_DIR" && export GIT_DIR
}
... elided ...
git read-tree -u -m HEAD
fi
The problem is the call to $(is_bare_repository), which is made before
GIT_DIR and GIT_WORK_TREE are restored. This call always returns "false",
even when we're running in a bare repository. But this means that we will
attempt to call 'git read-tree' even in a bare repository, which will fail
and print an error.
This patch modifies git-filter-branch.sh to restore the original
environment variables before trying to call is_bare_repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brian Gernhardt noticed that t3411 was broken recently on case insensitive
filesystems.
0088496 (test-lib.sh: introduce test_commit() and test_merge() helpers,
2009-01-27) used a tag and a file with the same name, only different in
case, and converted many existing tests that needed only a file (or a
tag).
Some tests may want to refer to a rev or a file, but on a filesystem that
loses cases, referring to either without disambiguation mark ("--") on the
command line now triggers an error (t3411 was the only one such test).
Fix it by using a filename that is different from the tagname each step
creates.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2182896 (t3412: clean up GIT_EDITOR usage, 2009-01-30) tried to clean up
the script's use of GIT_EDITOR, but it can further be simplified, because
that is how test-lib.sh sets things up already.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes "git push" issue a more detailed instruction when a user pushes
into the current branch of a non-bare repository without having an
explicit configuration set to receive.denycurrentbranch. In such a case,
it will also tell the user that the default will change to refusal in a
future version of git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace all 'git log --graph' calls for history verification with the
combination of 'git log ...| git name-rev' first introduced by a6c7a27
(rebase -i: correctly remember --root flag across --continue,
2009-01-26). This should be less susceptible to format changes than
the --graph code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
currently for cases like
From: A U Thor <a.u.thor@example.com> (Comment)
mailinfo extracts the following 'Author:' field:
Author: A U Thor (Comment)
^^
which has two extra spaces left in there after removed email part.
I think this is wrong so here is a fix.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ks/maint-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
* jk/signal-cleanup:
t0005: use SIGTERM for sigchain test
pager: do wait_for_pager on signal death
refactor signal handling for cleanup functions
chain kill signals for cleanup functions
diff: refactor tempfile cleanup handling
Windows: Fix signal numbers
The previous fix to mergetool to use checkout-index instead of cat-file
broke running mergetool anywhere except the root of the repository.
This fixes it by using the correct relative paths for temporary files
and index paths.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a6c7a27 (rebase -i: correctly remember --root flag across --continue,
2009-01-26) introduced a more portable GIT_EDITOR usage, but left the
old tests unchanged.
Since we never use the editor (all tests run the rebase script as
proposed by rebase -i), just disable it outright, which simplifies the
tests.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find out mode changes, we should not access the symlink
targets using stat(); instead we use lstat() so that the diff does
not fail trying to find a non-existing symlink target.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" used to validate only loose objects that are local and nothing
else by default. This is not just too little when a repository is
borrowing objects from other object stores, but also caused the
connectivity check to mistakenly declare loose objects borrowed from them
to be missing.
The rationale behind the default mode that validates only loose objects is
because these objects are still young and more unlikely to have been
pushed to other repositories yet. That holds for loose objects borrowed
from alternate object stores as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default we looked at all refs but not HEAD. The only thing that made
fsck not lose sight of commits that are only reachable from a detached
HEAD was the reflog for the HEAD.
This fixes it, with a new test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The signal tests consists of checking that each of our
handlers is executed, and that the test program was killed
by the final signal. We arbitrarily used SIGINT as the kill
signal.
However, some platforms (notably Solaris) will default
SIGINT to SIG_IGN if there is no controlling terminal. In
that case, we don't end up killing the program with the
final signal and the test fails.
This is a problem since the test script should not depend
on outside factors; let's use SIGTERM instead, which should
behave consistently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git symbolic-ref" it is easy to forget that
the target must be a fully qualified ref. E.g., you might
accidentally do:
$ git symbolic-ref HEAD master
Unfortunately, this is very difficult to recover from,
because the bogus contents of HEAD make git believe we are
no longer in a git repository (as is_git_dir explicitly
checks for "^refs/heads/" in the HEAD target). So
immediately trying to fix the situation doesn't work:
$ git symbolic-ref HEAD refs/heads/master
fatal: Not a git repository
and one is left editing the .git/HEAD file manually.
Furthermore, one might be tempted to use symbolic-ref to set
up a detached HEAD:
$ git symbolic-ref HEAD `git rev-parse HEAD`
which sets up an even more bogus HEAD:
$ cat .git/HEAD
ref: 1a9ace4f2ad4176148e61b5a85cd63d5604aac6d
This patch introduces a small safety valve to prevent the
specific case of anything not starting with refs/heads/ to
go into HEAD. The scope of the safety valve is intentionally
very limited, to make sure that we are not preventing any
behavior that would otherwise be valid (like pointing a
different symref than HEAD outside of refs/heads/).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the newly introduced test_commit() and test_merge() helpers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_commit() and test_merge(). This way, it is harder to forget to
tag, or to call test_tick before committing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_commit() and test_merge(), reducing the code while making the
intent clearer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we just need to add a commit with a given (short) name, that will
be tagged with the same name. Now, relatively complicated graphs can be
constructed easily and in a clear fashion:
test_commit A &&
test_commit B &&
git checkout A &&
test_commit C &&
test_merge D B
will construct this graph:
A - B
\ \
C - D
For simplicity, files whose name is the lower case version of the commit
message (to avoid a warning about ambiguous names) will be committed, with
the corresponding commit messages as contents.
If you need to provide a different file/different contents, you can use
the more explicit form
test_commit $MESSAGE $FILENAME $CONTENTS
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easy for other authors to use rebase tests' fake-editor.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than copying and pasting, which is prone to lead to fixes
missing in one version, move the fake-editor generator to t/t3404/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After you resolve a conflicted merge to remove the path, "git add -u"
failed to record the removal. Instead it errored out by saying that the
removed path is not found in the work tree, but that is what the user
already knows, and the wanted to record the removal as the resolution,
so the error does not make sense.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also as suggested by Junio, in order to try to catch other MIME
problems, test cases from the "8. Examples" section of RFC2047 are added
to t5100 testsuite as well.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Actually, I think the issue is pretty independent of submodules; when
"git commit" gets an empty parameter, it misinterprets it as a file.
So avoid passing an empty parameter to "git commit".
Actually, this is a nice cleanup, as MSG_FILE and EDIT_COMMIT were mutually
exclusive; use one variable instead
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempting to rebase three-commit series (two regular changes, followed by
one commit that changes what commit is bound for a submodule path) to
squash the first two results in a failure; not just the first two commits
squashed, but the change to the submodule is also included in the result.
This failure causes the subsequent step to "pick" the change that actually
changes the submodule to be applied, because there is no change left to be
applied.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This functions similarly to "git branch --contains"; it will show all
tags that contain the specified commit, by sharing the same logic.
The patch also adds documentation and tests for the new option.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the existing codepaths were meant to treat missing uninteresting
objects to be a silently ignored non-error, but there were a few places
in handle_commit() and add_parents_to_list(), which are two key functions
in the revision traversal machinery, that cared:
- When a tag refers to an object that we do not have, we barfed. We
ignore such a tag if it is painted as UNINTERESTING with this change.
- When digging deeper into the ancestry chain of a commit that is already
painted as UNINTERESTING, in order to paint its parents UNINTERESTING,
we barfed if parse_parent() for a parent commit object failed. We can
ignore such a parent commit object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last test case checks whether unpacked objects receive the time stamp
of the pack file. Due to different implementations of stat(2) by MSYS and
our version in compat/mingw.c, the test fails in about half of the test
runs.
Note the following facts:
- The test uses perl's -M operator to compare the time stamps. Since we
depend on MSYS perl, the result of this operator is based on MSYS's
implementation of the stat(2) call.
- NTFS on Windows records fractional seconds.
- The MSYS implementation of stat(2) *rounds* fractional seconds to full
seconds instead of truncating them. This becomes obvious by comparing the
modification times reported by 'ls --full-time $f' and 'stat $f' for
various files $f.
- Our implementation of stat(2) in compat/mingw.c *truncates* to full
seconds.
The consequence of this is that
- add_packed_git() picks up a truncated whole second modification time
from the pack file time stamp, which is then used for the loose objects,
while the pack file retains its time stamp in fractional seconds;
- but the test case compared the pack file's rounded modification times
to the loose objects' truncated modification times.
And half of the time the rounded modification time is not the same as its
truncated modification time.
The fix is that we replace perl by 'test-chmtime -v +0', which prints the
truncated whole-second mtime without modifying it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
send-pack: do not send unknown object name from ".have" to pack-objects
test-path-utils: Fix off by one, found by valgrind
get_sha1_basic(): fix invalid memory access, found by valgrind
v1.6.1 introduced ".have" extension to the protocol to allow the receiving
side to advertise objects that are reachable from refs in the repositories
it borrows from. This was meant to be used by the sending side to avoid
sending such objects; they are already available through the alternates
mechanism.
The client side implementation in v1.6.1, which was introduced with
40c155f (push: prepare sender to receive extended ref information from the
receiver, 2008-09-09) aka v1.6.1-rc1~203^2~1, were faulty in that it did
not consider the possiblity that the repository receiver borrows from
might have objects it does not know about.
This fixes it by refraining from passing missing commits to underlying
pack-objects. Revision machinery may need to be tightened further to
treat missing uninteresting objects as non-error events, but this is an
obvious and safe fix for a maintenance release that is almost good enough.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git mergetool used cat-file which does not perform git to
worktree conversion. This changes mergetool to use git checkout-index
instead which means that the temporary files used for mergetool use the
correct line endings for the platform.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an evil merge, as a test added since 1.6.0 expects an incorrect
behaviour the merged commit fixes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A patch that changes the filetype (e.g. regular file to symlink) of a path
must be split into a deletion event followed by a creation event, which
means that we need to have two independent metainfo lines for each.
However, the code reused the single set of metainfo lines.
As the blob object names recorded on the index lines are usually not used
nor validated on the receiving end, this is not an issue with normal use
of the resulting patch. However, when accepting a binary patch to delete
a blob, git-apply verified that the postimage blob object name on the
index line is 0{40}, hence a patch that deletes a regular file blob that
records binary contents to create a blob with different filetype (e.g. a
symbolic link) failed to apply. "git am -3" also uses the blob object
names recorded on the index line, so it would also misbehave when
synthesizing a preimage tree.
This moves the code to generate metainfo lines around, so that two
independent sets of metainfo lines are used for the split halves.
Additional tests by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells have issues with a single-shot environment variable export
when invoking a shell function. This fixes the ones I found that invoke
test_must_fail that way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d911d14 (rebase -i: learn to rebase root commit, 2009-01-02) tried to
remember the --root flag across a merge conflict in a broken way.
Introduce a flag file $DOTEST/rebase-root to fix and clarify.
While at it, also make sure $UPSTREAM is always initialized to guard
against existing values in the environment.
[tr: added tests]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option tells 'git-am' to ignore the date header field
recorded in the format-patch output. The commits will have the
timestamp when they are created instead.
You can work a lot in one day to accumulate many changes, but
apply and push to the public repository only some of them at
the end of the first day. Then next day you can spend all your
working hours reading comics or chatting with your coworkers,
and apply your remaining patches from the previous day using
this option to pretend that you have been working at the end
of the day.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option tells 'git-am' to use the timestamp recorded
in the Email message as both author and committer date.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/diff-color-words:
Change the spelling of "wordregex".
color-words: Support diff.wordregex config option
color-words: make regex configurable via attributes
color-words: expand docs with precise semantics
color-words: enable REG_NEWLINE to help user
color-words: take an optional regular expression describing words
color-words: change algorithm to allow for 0-character word boundaries
color-words: refactor word splitting and use ALLOC_GROW()
Add color_fwrite_lines(), a function coloring each line individually
Added a test for this option, similar to (and based on) t9133 about
ignorance of .git directories
Signed-off-by: Vitaly "_Vi" Shukela <public_vi@tut.by>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: replaced 'echo -e' with printf so it works on POSIX shells]
[ew: added Vitaly to copyright even though it's based on my test]
Remove a call to git-log that I introduced for debugging and that
accidentally made it into d18ba22 (sha1_name: support @{-N} syntax in
get_sha1(), 2009-01-17).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
With --reject, git-am simply passes the --reject option to git-apply and thus
allows people to work with reject files if they so prefer.
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testcases for 'git log --diff-filter=[CM]' (copies and renames).
Also add a testcase for 'git log --follow'.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning an empty repository manually (that is, doing 'git init' and
then doing all configuration by hand) can be a lot of work. Save the
user this work by allowing the cloning of empty repositories.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "wordRegex" for configuration variable names. Use "word_regex" for C
language tokens.
Signed-off-by: Boyd Stephen Smith Jr. <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a piece of code wanted to do some cleanup before exiting
(e.g., cleaning up a lockfile or a tempfile), our usual
strategy was to install a signal handler that did something
like this:
do_cleanup(); /* actual work */
signal(signo, SIG_DFL); /* restore previous behavior */
raise(signo); /* deliver signal, killing ourselves */
For a single handler, this works fine. However, if we want
to clean up two _different_ things, we run into a problem.
The most recently installed handler will run, but when it
removes itself as a handler, it doesn't put back the first
handler.
This patch introduces sigchain, a tiny library for handling
a stack of signal handlers. You sigchain_push each handler,
and use sigchain_pop to restore whoever was before you in
the stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diff is invoked with --color-words (w/o =regex), use the regular
expression the user has configured as diff.wordregex.
diff drivers configured via attributes take precedence over the
diff.wordregex-words setting. If the user wants to change them, they have
their own configuration variables.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other config variables use CamelCase. This config variable should
not be an exception.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code used to misbehave when options to ignore certain whitespaces
(-w -b and --ignore-at-eol) were combined.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To do that, Git no longer looks forward for the '@{' corresponding to the
closing '}' but backward, and dwim_ref() as well as dwim_log() learnt
about the @{-<N>} notation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can have quite a many reflog entries, but you typically won't recall
which branch you were on after switching branches for more than several
times.
Instead of reading the reflog twice, this reads the branch switching event
and keeps as many entries as the user asked from the latest such entries,
which is the minimum required to be able to switch back to the branch we
were recently on.
[jc: improvements from Dscho squashed in]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some SVN repositories contain git repositories within them
(hopefully accidentally checked in). Since git refuses to track
nested ".git" repositories, this can be a problem when fetching
updates from SVN.
Thanks to Morgan Christiansson for the report and testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The get_log() function in the Perl SVN API introduced the limit
parameter in 1.2.0. However, this got discarded in our SVN::Ra
compatibility layer when used with SVN 1.1.x. We now emulate
the limit functionality in older SVN versions by preventing the
original callback from being called if the given limit has been
reached. This emulation is less bandwidth efficient, but SVN
1.1.x is becoming rarer now.
Additionally, the --limit parameter in svn(1) uses the
aforementioned get_log() functionality change in SVN 1.2.x.
t9129 no longer depends on --limit to work and instead uses
Perl to parse out the commit message.
Thanks to Tom G. Christensen for the bug report.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is a followup to 7fc35e0e94,
(workaround a for broken symlinks in SVN).
Since broken SVN clients can commit svn:special files without
the magic "link " prefix, this can affect delta application
when we update the broken svn:special file. So now we fall
back and retry the delta application on symlinks if having
a "link " prefix fails.
Our behavior differs from svn(1) (v1.5.1) slightly:
When a svn:special file is created w/o a "link " prefix, svn
will create a regular file (mode 100644 to git) with the
contents of the blob as-is.
Our behavior is to continue creating the symlink (mode 120000
to git) with the contents of the blob as-is. While this
differs from current svn(1) behavior, this is easier and more
efficient to implement (and the correctness of the svn(1) is
debatable, since it's a workaround for a bug in the first
place).
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Broken SVN clients generate empty files with the svn:special set
to '*'. This attempts to denote a symlink pointing to a file
with an empty path (""), which cannot be generated on a POSIX
system.
Thus, we mimic the behavior of svn(1) and create a zero-byte
file in our tree.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The ability to "...fatten [the] local repository by packing everything that
is needed by the local ref into a single new pack, including things that are
borrowed from alternates"[1] is supposed to be provided by the '-a' or '-A'
options to repack when '-l' is not used, but there is a flaw. For each
pack in the local repository without a .keep file, repack supplies a
--unpacked=<pack> argument to pack-objects.
The --unpacked option to pack-objects, with or without an argument, causes
pack-objects to ignore any object which is packed in a pack not mentioned
in an argument to --unpacked=. So, if there are local packs, and
'repack -a' is called, then any objects which reside in packs accessible
through alternates will _not_ be packed. If there are no local packs, then
no --unpacked argument will be supplied, and repack will behave as expected.
[1] http://mid.gmane.org/7v8wrwidi3.fsf@gitster.siamese.dyndns.org
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
* maint:
Update draft release notes for 1.6.1.1
builtin-fsck: fix off by one head count
t5540: clarify that http-push does not handle packed-refs on the remote
http-push: when making directories, have a trailing slash in the path name
http-push: fix off-by-path_len
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
"git bundle create x master master" used to create a bundle that lists
the same branch (master) twice. Cloning from such a bundle resulted in
a needless warning "warning: Duplicated ref: refs/remotes/origin/master".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When HEAD is detached, --all should list it, too, logically, as a
detached HEAD is by definition a temporary, unnamed branch.
It is especially necessary to list it when garbage collecting, as
the detached HEAD would be trashed.
Noticed by Thomas Rast.
Note that this affects creating bundles with --all; I contend that it
is a good change to add the HEAD, so that cloning from such a bundle
will give you a current branch. However, I had to fix t5701 as it
assumed that --all does not imply HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is a subdirectory of the gitdir (e.g.
<repo>/.git/refs/), then setup_git_directory_gently() will climb its
parent directories until it finds itself in a gitdir. However, no
matter how many parent directories it climbs, it sets
'GIT_DIR_ENVIRONMENT' to ".", which is obviously wrong.
This behaviour affected at least 'git rev-parse --git-dir' and hence
caused some errors in bash completion (e.g. customized command prompt
when on a detached head and completion of refs).
To fix this, we set the absolute path of the found gitdir instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have '-' mean the same as '@{-1}', i.e., the last branch we were on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let get_sha1() parse the @{-N} syntax, with docs and tests.
Note that while @{-1}^2, @{-2}~5 and such are supported, @{-1}@{1} is
currently not allowed.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Manipulating the character class table in ctype.c by hand is error prone.
To ensure that typos are found quickly, add a test program and script.
test-ctype checks the output of the character class macros isspace() et.
al. by applying them on all possible char values and consulting a list of
all characters in the particular class. It doesn't check tolower() and
toupper(); this could be added later.
The test script t0070-fundamental.sh is created because there is no good
place for the ctype test, yet -- except for t0000-basic.sh perhaps, but
it doesn't run well on Windows, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function lock_remote() sends MKCOL requests to make leading
directories; However, if it does not put a forward slash '/' at the end of
the path, the server sends a 301 redirect.
By leaving the '/' in place, we can avoid this additional step.
Incidentally, at least one version of Curl (7.16.3) does not resend
credentials when it follows a 301 redirect, so this commit also fixes
a bug.
Original patch by Tay Ray Chuan <rctay89@gmail.com>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the only colors available to --pretty=format
users are red, green, and blue. Rather than expand it with a
few new colors, this patch makes the usual config color
syntax available, including more colors, backgrounds, and
attributes.
Because colors are no longer bounded to a single word (e.g.,
%Cred), this uses a more advanced syntax that features a
beginning and end delimiter (but the old syntax still
works). So you can now do:
git log --pretty=tformat:'%C(yellow)%h%C(reset) %s'
to emulate --pretty=oneline, or even
git log --pretty=tformat:'%C(cyan magenta bold)%s%C(reset)'
if you want to relive the awesomeness of 4-color CGA.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the --color-words splitting regular expression configurable via
the diff driver's 'wordregex' attribute. The user can then set the
driver on a file in .gitattributes. If a regex is given on the
command line, it overrides the driver's setting.
We also provide built-in regexes for the languages that already had
funcname patterns, and add an appropriate diff driver entry for C/++.
(The patterns are designed to run UTF-8 sequences into a single chunk
to make sure they remain readable.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some applications, words are not delimited by white space. To
allow for that, you can specify a regular expression describing
what makes a word with
git diff --color-words='[A-Za-z0-9]+'
Note that words cannot contain newline characters.
As suggested by Thomas Rast, the words are the exact matches of the
regular expression.
Note that a regular expression beginning with a '^' will match only
a word at the beginning of the hunk, not a word at the beginning of
a line, and is probably not what you want.
This commit contains a quoting fix by Thomas Rast.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until now, the color-words code assumed that word boundaries are
identical to white space characters.
Therefore, it could get away with a very simple scheme: it copied the
hunks, substituted newlines for each white space character, called
libxdiff with the processed text, and then identified the text to
output by the offsets (which agreed since the original text had the
same length).
This code was ugly, for a number of reasons:
- it was impossible to introduce 0-character word boundaries,
- we had to print everything word by word, and
- the code needed extra special handling of newlines in the removed part.
Fix all of these issues by processing the text such that
- we build word lists, separated by newlines,
- we remember the original offsets for every word, and
- after calling libxdiff on the wordlists, we parse the hunk headers, and
find the corresponding offsets, and then
- we print the removed/added parts in one go.
The pre and post samples in the test were provided by Santi Béjar.
Note that there is some strange special handling of hunk headers where
one line range is 0 due to POSIX: in this case, the start is one too
low. In other words a hunk header '@@ -1,0 +2 @@' actually means that
the line must be added after the _second_ line of the pre text, _not_
the first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t3404: Add test case for auto-amending only edited commits after "edit"
t3404: Add test case for aborted --continue after "edit"
t3501: check that commits are actually done
* maint-1.6.0:
t3404: Add test case for auto-amending only edited commits after "edit"
t3404: Add test case for aborted --continue after "edit"
t3501: check that commits are actually done
Add a test case for the bugfix introduced by commit c14c3c82d
"git-rebase--interactive: auto amend only edited commit".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test case for the bugfix introduced by commit 8beb1f33d
"git-rebase-interactive: do not squash commits on abort".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea of t3501 is to check whether revert
and cherry-pick works on renamed files.
But as there is no pure cherry-pick/revert test, it is
good to also check if commits are actually done in that
scenario.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.6.1.1
Make t3411 executable
fix handling of multiple untracked files for git mv -k
add test cases for "git mv -k"
The line length was read from the same position every time,
causing mangled output when printing notes with multiple lines.
Also, adding new-line manually for each line ensures that we
get a new-line between commits, matching git-log for commits
without notes.
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-k" option to "git mv" should allow specifying multiple untracked
files. Currently, multiple untracked files raise an assertion if they
appear consecutively as arguments. Fix this by decrementing the loop
index after removing one entry from the array of arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases for ignoring nonexisting and untracked files using the -k
option to "git mv". There is one known breakage related to multiple
untracked files specfied as consecutive arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-merge-recursive-fix:
merge-recursive: do not clobber untracked working tree garbage
modify/delete conflict resolution overwrites untracked file
Conflicts:
builtin-merge-recursive.c
Without any explicit -o parameter, we correctly avoided putting the
resulting patch output to the toplevel. We should do the same when
the user gave a relative pathname to be consistent with this case.
Noticed by Cesar Eduardo Barros.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At present we do headers unfolding (see RFC822 3.1.1. LONG HEADER FIELDS) for
all fields except 'From' (always) and 'Subject' (when keep_subject is set)
Not unfolding 'From' is a bug -- see above-mentioned RFC link.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to a200337 (git-am: propagate -C<n>, -p<n> options as well,
2008-12-04) and commits around it, "git am" is equipped to correctly
propagate the command line flags such as -C/-p/-whitespace across a patch
failure and restart.
It is trivial to support --directory option now, resurrecting previous
attempts by Kevin and Simon.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase -i a new option --root, which instructs it to rebase
the entire history leading up to <branch>. This is mainly for
symmetry with ordinary git-rebase; it cannot be used to edit the root
commit in-place (it requires --onto <newbase>). Commits that already
exist in <newbase> are skipped.
In the normal mode of operation, this is fairly straightforward. We
run cherry-pick in a loop, and cherry-pick has supported picking the
root commit since f95ebf7 (Allow cherry-picking root commits,
2008-07-04).
In --preserve-merges mode, we track the mapping from old to rewritten
commits and use it to update the parent list of each commit. In this
case, we define 'rebase -i -p --root --onto $onto $branch' to rewrite
the parent list of all root commit(s) on $branch to contain $onto
instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase a new option --root, which instructs it to rebase the
entire history leading up to <branch>. This option must be used with
--onto <newbase>, and causes commits that already exist in <newbase>
to be skipped. (Normal operation skips commits that already exist in
<upstream> instead.)
One possible use-case is with git-svn: suppose you start hacking
(perhaps offline) on a new project, but later notice you want to
commit this work to SVN. You will have to rebase the entire history,
including the root commit, on a (possibly empty) commit coming from
git-svn, to establish a history connection. This previously had to
be done by cherry-picking the root commit manually.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-notes have the potential of being pretty expensive, so test with
a lot of commits. A lot. So to make things cheaper, you have to
opt-in explicitely, by setting the environment variable
GIT_NOTES_TIMING_TESTS.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm not sure how often this functionality is used, but in case
it's not, having an extra test here will help catch breakage
sooner.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die() message updated accordingly.
The previous behaviour was to only allow cloning when the destination
directory doesn't exist.
[jc: added trivial tests]
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When native language (RU) is in use, subject header usually contains several
parts, e.g.
Subject: [Navy-patches] [PATCH]
=?utf-8?b?0JjQt9C80LXQvdGR0L0g0YHQv9C40YHQvtC6INC/0LA=?=
=?utf-8?b?0LrQtdGC0L7QsiDQvdC10L7QsdGF0L7QtNC40LzRi9GFINC00LvRjyA=?=
=?utf-8?b?0YHQsdC+0YDQutC4?=
This exposes several bugs in builtin-mailinfo.c:
1. decode_b_segment: do not append explicit NUL -- explicit NUL was preventing
correct header construction on parts concatenation via strbuf_addbuf in
decode_header_bq. Fixes:
-Subject: Изменён список пакетов необходимых для сборки
+Subject: Изменён список па
Then
2. Do not emit '\n' between "encoded-word" where RFC2046 says that linear
white space between them are ignored when displaying. Fixes:
-Subject: Изменён список пакетов необходимых для сборки
+Subject: Изменён список па кетов необходимых для сборки
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--signoff" test case in t7500-commit.sh was setting VISUAL while
using -F -, which indeed tested that the editor is not spawned with -F.
However, having it there was confusing, since there was no obvious reason
to the casual reader for it to be there.
This commits removes the setting of VISUAL from the --signoff test, and
adds in t7501-commit.sh a dedicated test case, where the rest of tests for
-F are.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Okay-then-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_commit_non_empty_tree is added to the functions that can be run from
commit filters. Its effect is to commit only commits actually touching the
tree and that are not merge points either.
The option --prune-empty is added. It defaults the commit-filter to
'git_commit_non_empty_tree "$@"', and can be used with any other
combination of filters, except --commit-hook that must used
'git_commit_non_empty_tree "$@"' where one puts 'git commit-tree "$@"'
usually to achieve the same result.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous "parse-opt"ification broke git-apply reading from the
standard input. "git apply A - C <B" is supposed to read patches from
files A, B and C in this order.
Before "parse-opt"ification, we used be able to:
git apply --stat - --apply <A B
to read the patch from file A, showing only the diffstat, and then read the
patch from file B, showing the diffstat and actually applying it. Even
with this fix we cannot do that anymore, but that is so crazy use case I
do not think anybody sane relied on such a broken behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches Git to produce diff output using the patience diff
algorithm with the diff option '--patience'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accept -- as an "end of options" marker even when using --no-index.
Previously, the -- triggered a "normal" index/tree diff and subsequently
failed because of the unrecognized (in that mode) --no-index.
Note that the second loop can treat '--' as a normal option, because
the preceding checks ensure it is the third-to-last argument.
While at it, fix the parsing of "-q" option in --no-index mode as well.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0cf73755 (unpack-trees.c: assume submodules are clean during
check-out) changed an argument to verify_absent from 'path' to 'ce',
which is however shadowed by a local variable of the same name.
The bug triggers if verify_absent is used on a tree entry, for which
the index contains one or more subsequent directories of the same
length. The affected subdirectories are removed from the index. The
testcase included in this commit bisects to 55218834 (checkout: do not
lose staged removal), which reveals the bug in this case, but is
otherwise unrelated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 203a2fe1 (Allow callers of unpack_trees() to handle failure)
changed the "die on error" behavior to "return failure code".
verify_absent did not handle errors returned by
verify_clean_subdirectory, however.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Mac OS X and possibly BSDs, /bin/pwd reads PWD from the environment if
available and shows the logical path by default rather than the physical
one.
Unset PWD before running /bin/pwd in both cd_to_toplevel and its test.
Still use the external /bin/pwd because in my Bash on Linux, the builtin
pwd prints the same result whether or not PWD is set.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Tested-by: Wincent Colaiuta <win@wincent.com> (on Mac OS X 10.5.5)
Tested-by: Marcel Koeppen <git-dev@marzelpan.de> (on Mac OS X 10.5.6)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It comes quite as a surprise to an unsuspecting Git user that calling
"git add submodule/file" (which is a mistake, alright) _removes_
the submodule in the index, and adds the file. Instead, complain loudly.
While at it, be nice when the user said "git add submodule/" which is
most likely the consequence of tab-completion, and stage the submodule,
instead of trying to add the contents of that directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With options such as "--all --since=2.weeks.ago", annotated tags used to
be included, when they should have been excluded. The reason is that we
heavily abuse the revision walker to determine what needs to be included
or excluded. And the revision walker does not show tags at all (and
therefore never marks tags as uninteresting).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -b newbranch $commit^{tree}" mistakenly created a new branch
rooted at the current HEAD, because in that case, the two structure fields
used to see if the command was invoked without any argument (hence it
needs to default to checking out the HEAD) were populated incorrectly.
Upon seeing a command line argument that we took as a rev, we should store
that string in new.name, even if that does not name a commit. This will
correctly trigger the existing safety logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
A git patch that does not change the executable bit records the mode bits
on its "index" line. "git apply" used to interpret this mode exactly the
same way as it interprets the mode recorded on "new mode" line, as the
wish by the patch submitter to set the mode to the one recorded on the
line.
The reason the mode does not agree between the submitter and the receiver
in the first place is because there is _another_ commit that only appears
on one side but not the other since their histories diverged, and that
commit changes the mode. The patch has "index" line but not "new mode"
line because its change is about updating the contents without affecting
the mode. The application of such a patch is an explicit wish by the
submitter to only cherry-pick the commit that updates the contents without
cherry-picking the commit that modifies the mode. Viewed this way, the
current behaviour is problematic, even though the command does warn when
the mode of the path being patched does not match this mode, and a careful
user could detect this inconsistencies between the patch submitter and the
patch receiver.
This changes the semantics of the mode recorded on the "index" line;
instead of interpreting it as the submitter's wish to set the mode to the
recorded value, it merely informs what the mode submitter happened to
have, and the presense of the "index" line is taken as submitter's wish to
keep whatever the mode is on the receiving end.
This is based on the patch originally done by Alexander Potashev with a
minor fix; the tests are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* np/auto-thread:
Force t5302 to use a single thread
pack-objects: don't use too many threads with few objects
autodetect number of CPUs by default when using threads
Merge two hunks if there is only the specified number of otherwise unshown
context between them. For --inter-hunk-context=1, the resulting patch has
the same number of lines but shows uninterrupted context instead of a
context header line in between.
Patches generated with this option are easier to read but are also more
likely to conflict if the file to be patched contains other changes.
This patch keeps the default for this option at 0. It is intended to just
make the feature available in order to see its advantages and downsides.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Assume unchanged" bit means "please pretend that I have never touched
this file", so if user removes the file, we should not care.
This patch teaches "git grep" to use cache version in such
situations. External grep case has not been fixed yet. But given that
on the platform that CE_VALID bit may be used like Windows, external
grep is not available anyway, I would wait for people to raise their
hands before touching it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 212945d4 ("Teach git-describe to verify annotated tag names
before output") git-describe learned how to output a warning if
an annotated tag object was matched but its internal name doesn't
match the local ref name.
However, "git describe --all" causes the local ref name to be
prefixed with "tags/", so we need to skip over this prefix before
comparing the local ref name with the name recorded inside of the
tag object.
Patch-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file was renamed in one branch, but deleted in the other, one
should expect the index to contain an unmerged entry, namely the
target of the rename. Make it so.
Noticed by Constantine Plotnikov.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/rebase-i-p:
rebase -i -p: leave a --cc patch when a merge could not be redone
rebase -i -p: Fix --continue after a merge could not be redone
Show a failure of rebase -p if the merge had a conflict
