"git for-each-ref" learned "--include-root-refs" option to show
even the stuff outside the 'refs/' hierarchy.
* kn/for-all-refs:
for-each-ref: add new option to include root refs
ref-filter: rename 'FILTER_REFS_ALL' to 'FILTER_REFS_REGULAR'
refs: introduce `refs_for_each_include_root_refs()`
refs: extract out `loose_fill_ref_dir_regular_file()`
refs: introduce `is_pseudoref()` and `is_headref()`
The logic to access reflog entries by date and number had ugly
corner cases at the boundaries, which have been cleaned up.
* jk/reflog-special-cases-fix:
read_ref_at(): special-case ref@{0} for an empty reflog
get_oid_basic(): special-case ref@{n} for oldest reflog entry
Revert "refs: allow @{n} to work with n-sized reflog"
The previous commit special-cased get_oid_basic()'s handling of ref@{n}
for a reflog with n entries. But its special case doesn't work for
ref@{0} in an empty reflog, because read_ref_at() dies when it notices
the empty reflog!
We can make this work by special-casing this in read_ref_at(). It's
somewhat gross, for two reasons:
1. We have no reflog entry to describe in the "msg" out-parameter. So
we have to leave it uninitialized or make something up.
2. Likewise, we have no oid to put in the "oid" out-parameter. Leaving
it untouched is actually the best thing here, as all of the callers
will have initialized it with the current ref value via
repo_dwim_log(). This is rather subtle, but it is how things worked
in 6436a20284 (refs: allow @{n} to work with n-sized reflog,
2021-01-07) before we reverted it.
The key difference from 6436a20284 here is that we'll return "1" to
indicate that we _didn't_ find the requested reflog entry. Coupled with
the special-casing in get_oid_basic() in the previous commit, that's
enough to make looking up ref@{0} work, and we can flip 6436a20284's
test back to expect_success.
It also means that the call in show-branch which segfaulted with
6436a20284 (and which is now tested in t3202) remains OK. The caller
notices that we could not find any reflog entry, and so it breaks out of
its loop, showing nothing. This is different from the current behavior
of producing an error, but it's just as reasonable (and is exactly what
we'd do if you asked it to walk starting at ref@{1} but there was only 1
entry).
Thus nobody should actually look at the reflog entry info we return. But
we'll still put in some fake values just to be on the safe side, since
this is such a subtle and confusing interface. Likewise, we'll document
what's going on in a comment above the function declaration. If this
were a function with a lot of callers, the footgun would probably not be
worth it. But it has only ever had two callers in its 18-year existence,
and it seems unlikely to grow more. So let's hold our noses and let
users enjoy the convenience of a simulated ref@{0}.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of 6436a20284 (refs: allow @{n} to work with n-sized reflog,
2021-01-07) was that if we have "n" entries in a reflog, we should still
be able to resolve ref@{n} by looking at the "old" value of the oldest
entry.
Commit 6436a20284 tried to put the logic into read_ref_at() by shifting
its idea of "n" by one. But we reverted that in the previous commit,
since it led to bugs in other callers which cared about the details of
the reflog entry we found. Instead, let's put the special case into the
caller that resolves @{n}, as it cares only about the oid.
read_ref_at() is even kind enough to return the "old" value from the
final reflog; it just returns "1" to signal to us that we ran off the
end of the reflog. But we can notice in the caller that we read just
enough records for that "old" value to be the one we're looking for, and
use it.
Note that read_ref_at() could notice this case, too, and just return 0.
But we don't want to do that, because the caller must be made aware that
we only found the oid, not an actual reflog entry (and the call sites in
show-branch do care about this).
There is one complication, though. When read_ref_at() hits a truncated
reflog, it will return the "old" value of the oldest entry only if it is
not the null oid. Otherwise, it actually returns the "new" value from
that entry! This bit of fudging is due to d1a4489a56 (avoid null SHA1 in
oldest reflog, 2008-07-08), where asking for "ref@{20.years.ago}" for a
ref created recently will produce the initial value as a convenience
(even though technically it did not exist 20 years ago).
But this convenience is only useful for time-based cutoffs. For
count-based cutoffs, get_oid_basic() has always simply complained about
going too far back:
$ git rev-parse HEAD@{20}
fatal: log for 'HEAD' only has 16 entries
and we should continue to do so, rather than returning a nonsense value
(there's even a test in t1508 already which covers this). So let's have
the d1a4489a56 code kick in only when doing timestamp-based cutoffs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6436a20284.
The idea of that commit is that if read_ref_at() is counting back to the
Nth reflog but the reflog is short by one entry (e.g., because it was
pruned), we can find the oid of the missing entry by looking at the
"before" oid value of the entry that comes after it (whereas before, we
looked at the "after" value of each entry and complained that we
couldn't find the one from before the truncation).
This works fine for resolving the oid of ref@{n}, as it is used by
get_oid_basic(), which does not look at any other aspect of the reflog
we found (e.g., its timestamp or message). But there's another caller of
read_ref_at(): in show-branch we use it to walk over the reflog, and we
do care about the reflog entry. And so that commit broke "show-branch
--reflog"; it shows the reflog message for ref@{0} as ref@{1}, ref@{1}
as ref@{2}, and so on.
For example, in the new test in t3202 we produce:
! [branch@{0}] (0 seconds ago) commit: three
! [branch@{1}] (0 seconds ago) commit: three
! [branch@{2}] (60 seconds ago) commit: two
! [branch@{3}] (2 minutes ago) reset: moving to HEAD^
instead of the correct:
! [branch@{0}] (0 seconds ago) commit: three
! [branch@{1}] (60 seconds ago) commit: two
! [branch@{2}] (2 minutes ago) reset: moving to HEAD^
! [branch@{3}] (2 minutes ago) commit: one
But there's another bug, too: because it is looking at the "old" value
of the reflog after the one we're interested in, it has to special-case
ref@{0} (since there isn't anything after it). That's why it doesn't
show the offset bug in the output above. But this special-case code
fails to handle the situation where the reflog is empty or missing; it
returns success even though the reflog message out-parameter has been
left uninitialized. You can't trigger this through get_oid_basic(), but
"show-branch --reflog" will pretty reliably segfault as it tries to
access the garbage pointer.
Fixing the segfault would be pretty easy. But the off-by-one problem is
inherent in this approach. So let's start by reverting the commit to
give us a clean slate to work with.
This isn't a pure revert; all of the code changes are reverted, but for
the tests:
1. We'll flip the cases in t1508 to expect_failure; making these work
was the goal of 6436a2028, and we'll want to use them for our
replacement approach.
2. There's a test in t3202 for "show-branch --reflog", but it expects
the broken output! It was added by f2463490c4 (show-branch: show
reflog message, 2021-12-02) which was fixing another bug, and I
think the author simply didn't notice that the second line showed
the wrong reflog.
Rather than fixing that test, let's replace it with one that is
more thorough (while still covering the reflog message fix from
that commit). We'll use a longer reflog, which lets us see more
entries (thus making the "off by one" pattern much more clear). And
we'll use a more recent timestamp for "now" so that our relative
dates have more resolution. That lets us see that the reflog dates
are correct (whereas when you are 4 years away, two entries that
are 60 seconds apart will have the same "4 years ago" relative
date). Because we're adjusting the repository state, I've moved
this new test to the end of the script, leaving the other tests
undisturbed.
We'll also add a new test which covers the missing reflog case;
previously it segfaulted, but now it reports the empty reflog).
Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new ref iteration flag `DO_FOR_EACH_INCLUDE_ROOT_REFS`,
which will be used to iterate over regular refs plus pseudorefs and
HEAD.
Refs which fall outside the `refs/` and aren't either pseudorefs or HEAD
are more of a grey area. This is because we don't block the users from
creating such refs but they are not officially supported.
Introduce `refs_for_each_include_root_refs()` which calls
`do_for_each_ref()` with this newly introduced flag.
In `refs/files-backend.c`, introduce a new function
`add_pseudoref_and_head_entries()` to add pseudorefs and HEAD to the
`ref_dir`. We then finally call `add_pseudoref_and_head_entries()`
whenever the `DO_FOR_EACH_INCLUDE_ROOT_REFS` flag is set. Any new ref
backend will also have to implement similar changes on its end.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new functions `is_pseudoref()` and `is_headref()`. This
provides the necessary functionality for us to add pseudorefs and HEAD
to the loose ref cache in the files backend, allowing us to build
tooling to print these refs.
The `is_pseudoref()` function internally calls `is_pseudoref_syntax()`
but adds onto it by also checking to ensure that the pseudoref either
ends with a "_HEAD" suffix or matches a list of exceptions. After which
we also parse the contents of the pseudoref to ensure that it conforms
to the ref format.
We cannot directly add the new syntax checks to `is_pseudoref_syntax()`
because the function is also used by `is_current_worktree_ref()` and
making it stricter to match only known pseudorefs might have unintended
consequences due to files like 'BISECT_START' which isn't a pseudoref
but sometimes contains object ID.
Keeping this in mind, we leave `is_pseudoref_syntax()` as is and create
`is_pseudoref()` which is stricter. Ideally we'd want to move the new
syntax checks to `is_pseudoref_syntax()` but a prerequisite for this
would be to actually remove the exception list by converting those
pseudorefs to also contain a '_HEAD' suffix and perhaps move bisect
related files like 'BISECT_START' to a new directory similar to the
'rebase-merge' directory.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref and reflog iterators share much of the same underlying code to
iterate over the corresponding entries. This results in some weird code
because the reflog iterator also exposes an object ID as well as a flag
to the callback function. Neither of these fields do refer to the reflog
though -- they refer to the corresponding ref with the same name. This
is quite misleading. In practice at least the object ID cannot really be
implemented in any other way as a reflog does not have a specific object
ID in the first place. This is further stressed by the fact that none of
the callbacks except for our test helper make use of these fields.
Split up the infrastucture so that ref and reflog iterators use separate
callback signatures. This allows us to drop the nonsensical fields from
the reflog iterator.
Note that internally, the backends still use the same shared infra to
iterate over both types. As the backends should never end up being
called directly anyway, this is not much of a problem and thus kept
as-is for simplicity's sake.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit we have converted the reflog iterator of the
"files" backend to be ordered, which was the only remaining ref iterator
that wasn't ordered. Refactor the ref iterator infrastructure so that we
always assume iterators to be ordered, thus simplifying the code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to scalability issues, Shawn Pearce has originally proposed a new
"reftable" format more than six years ago [1]. Initially, this new
format was implemented in JGit with promising results. Around two years
ago, we have then added the "reftable" library to the Git codebase via
a4bbd13be3 (Merge branch 'hn/reftable', 2021-12-15). With this we have
landed all the low-level code to read and write reftables. Notably
missing though was the integration of this low-level code into the Git
code base in the form of a new ref backend that ties all of this
together.
This gap is now finally closed by introducing a new "reftable" backend
into the Git codebase. This new backend promises to bring some notable
improvements to Git repositories:
- It becomes possible to do truly atomic writes where either all refs
are committed to disk or none are. This was not possible with the
"files" backend because ref updates were split across multiple loose
files.
- The disk space required to store many refs is reduced, both compared
to loose refs and packed-refs. This is enabled both by the reftable
format being a binary format, which is more compact, and by prefix
compression.
- We can ignore filesystem-specific behaviour as ref names are not
encoded via paths anymore. This means there is no need to handle
case sensitivity on Windows systems or Unicode precomposition on
macOS.
- There is no need to rewrite the complete refdb anymore every time a
ref is being deleted like it was the case for packed-refs. This
means that ref deletions are now constant time instead of scaling
linearly with the number of refs.
- We can ignore file/directory conflicts so that it becomes possible
to store both "refs/heads/foo" and "refs/heads/foo/bar".
- Due to this property we can retain reflogs for deleted refs. We have
previously been deleting reflogs together with their refs to avoid
file/directory conflicts, which is not necessary anymore.
- We can properly enumerate all refs. With the "files" backend it is
not easily possible to distinguish between refs and non-refs because
they may live side by side in the gitdir.
Not all of these improvements are realized with the current "reftable"
backend implementation. At this point, the new backend is supposed to be
a drop-in replacement for the "files" backend that is used by basically
all Git repositories nowadays. It strives for 1:1 compatibility, which
means that a user can expect the same behaviour regardless of whether
they use the "reftable" backend or the "files" backend for most of the
part.
Most notably, this means we artificially limit the capabilities of the
"reftable" backend to match the limits of the "files" backend. It is not
possible to create refs that would end up with file/directory conflicts,
we do not retain reflogs, we perform stricter-than-necessary checks.
This is done intentionally due to two main reasons:
- It makes it significantly easier to land the "reftable" backend as
tests behave the same. It would be tough to argue for each and every
single test that doesn't pass with the "reftable" backend.
- It ensures compatibility between repositories that use the "files"
backend and repositories that use the "reftable" backend. Like this,
hosters can migrate their repositories to use the "reftable" backend
without causing issues for clients that use the "files" backend in
their clones.
It is expected that these artificial limitations may eventually go away
in the long term.
Performance-wise things very much depend on the actual workload. The
following benchmarks compare the "files" and "reftable" backends in the
current version:
- Creating N refs in separate transactions shows that the "files"
backend is ~50% faster. This is not surprising given that creating a
ref only requires us to create a single loose ref. The "reftable"
backend will also perform auto compaction on updates. In real-world
workloads we would likely also want to perform pack loose refs,
which would likely change the picture.
Benchmark 1: update-ref: create refs sequentially (refformat = files, refcount = 1)
Time (mean ± σ): 2.1 ms ± 0.3 ms [User: 0.6 ms, System: 1.7 ms]
Range (min … max): 1.8 ms … 4.3 ms 133 runs
Benchmark 2: update-ref: create refs sequentially (refformat = reftable, refcount = 1)
Time (mean ± σ): 2.7 ms ± 0.1 ms [User: 0.6 ms, System: 2.2 ms]
Range (min … max): 2.4 ms … 2.9 ms 132 runs
Benchmark 3: update-ref: create refs sequentially (refformat = files, refcount = 1000)
Time (mean ± σ): 1.975 s ± 0.006 s [User: 0.437 s, System: 1.535 s]
Range (min … max): 1.969 s … 1.980 s 3 runs
Benchmark 4: update-ref: create refs sequentially (refformat = reftable, refcount = 1000)
Time (mean ± σ): 2.611 s ± 0.013 s [User: 0.782 s, System: 1.825 s]
Range (min … max): 2.597 s … 2.622 s 3 runs
Benchmark 5: update-ref: create refs sequentially (refformat = files, refcount = 100000)
Time (mean ± σ): 198.442 s ± 0.241 s [User: 43.051 s, System: 155.250 s]
Range (min … max): 198.189 s … 198.670 s 3 runs
Benchmark 6: update-ref: create refs sequentially (refformat = reftable, refcount = 100000)
Time (mean ± σ): 294.509 s ± 4.269 s [User: 104.046 s, System: 190.326 s]
Range (min … max): 290.223 s … 298.761 s 3 runs
- Creating N refs in a single transaction shows that the "files"
backend is significantly slower once we start to write many refs.
The "reftable" backend only needs to update two files, whereas the
"files" backend needs to write one file per ref.
Benchmark 1: update-ref: create many refs (refformat = files, refcount = 1)
Time (mean ± σ): 1.9 ms ± 0.1 ms [User: 0.4 ms, System: 1.4 ms]
Range (min … max): 1.8 ms … 2.6 ms 151 runs
Benchmark 2: update-ref: create many refs (refformat = reftable, refcount = 1)
Time (mean ± σ): 2.5 ms ± 0.1 ms [User: 0.7 ms, System: 1.7 ms]
Range (min … max): 2.4 ms … 3.4 ms 148 runs
Benchmark 3: update-ref: create many refs (refformat = files, refcount = 1000)
Time (mean ± σ): 152.5 ms ± 5.2 ms [User: 19.1 ms, System: 133.1 ms]
Range (min … max): 148.5 ms … 167.8 ms 15 runs
Benchmark 4: update-ref: create many refs (refformat = reftable, refcount = 1000)
Time (mean ± σ): 58.0 ms ± 2.5 ms [User: 28.4 ms, System: 29.4 ms]
Range (min … max): 56.3 ms … 72.9 ms 40 runs
Benchmark 5: update-ref: create many refs (refformat = files, refcount = 1000000)
Time (mean ± σ): 152.752 s ± 0.710 s [User: 20.315 s, System: 131.310 s]
Range (min … max): 152.165 s … 153.542 s 3 runs
Benchmark 6: update-ref: create many refs (refformat = reftable, refcount = 1000000)
Time (mean ± σ): 51.912 s ± 0.127 s [User: 26.483 s, System: 25.424 s]
Range (min … max): 51.769 s … 52.012 s 3 runs
- Deleting a ref in a fully-packed repository shows that the "files"
backend scales with the number of refs. The "reftable" backend has
constant-time deletions.
Benchmark 1: update-ref: delete ref (refformat = files, refcount = 1)
Time (mean ± σ): 1.7 ms ± 0.1 ms [User: 0.4 ms, System: 1.2 ms]
Range (min … max): 1.6 ms … 2.1 ms 316 runs
Benchmark 2: update-ref: delete ref (refformat = reftable, refcount = 1)
Time (mean ± σ): 1.8 ms ± 0.1 ms [User: 0.4 ms, System: 1.3 ms]
Range (min … max): 1.7 ms … 2.1 ms 294 runs
Benchmark 3: update-ref: delete ref (refformat = files, refcount = 1000)
Time (mean ± σ): 2.0 ms ± 0.1 ms [User: 0.5 ms, System: 1.4 ms]
Range (min … max): 1.9 ms … 2.5 ms 287 runs
Benchmark 4: update-ref: delete ref (refformat = reftable, refcount = 1000)
Time (mean ± σ): 1.9 ms ± 0.1 ms [User: 0.5 ms, System: 1.3 ms]
Range (min … max): 1.8 ms … 2.1 ms 217 runs
Benchmark 5: update-ref: delete ref (refformat = files, refcount = 1000000)
Time (mean ± σ): 229.8 ms ± 7.9 ms [User: 182.6 ms, System: 46.8 ms]
Range (min … max): 224.6 ms … 245.2 ms 6 runs
Benchmark 6: update-ref: delete ref (refformat = reftable, refcount = 1000000)
Time (mean ± σ): 2.0 ms ± 0.0 ms [User: 0.6 ms, System: 1.3 ms]
Range (min … max): 2.0 ms … 2.1 ms 3 runs
- Listing all refs shows no significant advantage for either of the
backends. The "files" backend is a bit faster, but not by a
significant margin. When repositories are not packed the "reftable"
backend outperforms the "files" backend because the "reftable"
backend performs auto-compaction.
Benchmark 1: show-ref: print all refs (refformat = files, refcount = 1, packed = true)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 2.0 ms 1729 runs
Benchmark 2: show-ref: print all refs (refformat = reftable, refcount = 1, packed = true)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 1.8 ms 1816 runs
Benchmark 3: show-ref: print all refs (refformat = files, refcount = 1000, packed = true)
Time (mean ± σ): 4.3 ms ± 0.1 ms [User: 0.9 ms, System: 3.3 ms]
Range (min … max): 4.1 ms … 4.6 ms 645 runs
Benchmark 4: show-ref: print all refs (refformat = reftable, refcount = 1000, packed = true)
Time (mean ± σ): 4.5 ms ± 0.2 ms [User: 1.0 ms, System: 3.3 ms]
Range (min … max): 4.2 ms … 5.9 ms 643 runs
Benchmark 5: show-ref: print all refs (refformat = files, refcount = 1000000, packed = true)
Time (mean ± σ): 2.537 s ± 0.034 s [User: 0.488 s, System: 2.048 s]
Range (min … max): 2.511 s … 2.627 s 10 runs
Benchmark 6: show-ref: print all refs (refformat = reftable, refcount = 1000000, packed = true)
Time (mean ± σ): 2.712 s ± 0.017 s [User: 0.653 s, System: 2.059 s]
Range (min … max): 2.692 s … 2.752 s 10 runs
Benchmark 7: show-ref: print all refs (refformat = files, refcount = 1, packed = false)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 1.9 ms 1834 runs
Benchmark 8: show-ref: print all refs (refformat = reftable, refcount = 1, packed = false)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.4 ms … 2.0 ms 1840 runs
Benchmark 9: show-ref: print all refs (refformat = files, refcount = 1000, packed = false)
Time (mean ± σ): 13.8 ms ± 0.2 ms [User: 2.8 ms, System: 10.8 ms]
Range (min … max): 13.3 ms … 14.5 ms 208 runs
Benchmark 10: show-ref: print all refs (refformat = reftable, refcount = 1000, packed = false)
Time (mean ± σ): 4.5 ms ± 0.2 ms [User: 1.2 ms, System: 3.3 ms]
Range (min … max): 4.3 ms … 6.2 ms 624 runs
Benchmark 11: show-ref: print all refs (refformat = files, refcount = 1000000, packed = false)
Time (mean ± σ): 12.127 s ± 0.129 s [User: 2.675 s, System: 9.451 s]
Range (min … max): 11.965 s … 12.370 s 10 runs
Benchmark 12: show-ref: print all refs (refformat = reftable, refcount = 1000000, packed = false)
Time (mean ± σ): 2.799 s ± 0.022 s [User: 0.735 s, System: 2.063 s]
Range (min … max): 2.769 s … 2.836 s 10 runs
- Printing a single ref shows no real difference between the "files"
and "reftable" backends.
Benchmark 1: show-ref: print single ref (refformat = files, refcount = 1)
Time (mean ± σ): 1.5 ms ± 0.1 ms [User: 0.4 ms, System: 1.0 ms]
Range (min … max): 1.4 ms … 1.8 ms 1779 runs
Benchmark 2: show-ref: print single ref (refformat = reftable, refcount = 1)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.4 ms … 2.5 ms 1753 runs
Benchmark 3: show-ref: print single ref (refformat = files, refcount = 1000)
Time (mean ± σ): 1.5 ms ± 0.1 ms [User: 0.3 ms, System: 1.1 ms]
Range (min … max): 1.4 ms … 1.9 ms 1840 runs
Benchmark 4: show-ref: print single ref (refformat = reftable, refcount = 1000)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 2.0 ms 1831 runs
Benchmark 5: show-ref: print single ref (refformat = files, refcount = 1000000)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 2.1 ms 1848 runs
Benchmark 6: show-ref: print single ref (refformat = reftable, refcount = 1000000)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 2.1 ms 1762 runs
So overall, performance depends on the usecases. Except for many
sequential writes the "reftable" backend is roughly on par or
significantly faster than the "files" backend though. Given that the
"files" backend has received 18 years of optimizations by now this can
be seen as a win. Furthermore, we can expect that the "reftable" backend
will grow faster over time when attention turns more towards
optimizations.
The complete test suite passes, except for those tests explicitly marked
to require the REFFILES prerequisite. Some tests in t0610 are marked as
failing because they depend on still-in-flight bug fixes. Tests can be
run with the new backend by setting the GIT_TEST_DEFAULT_REF_FORMAT
environment variable to "reftable".
There is a single known conceptual incompatibility with the dumb HTTP
transport. As "info/refs" SHOULD NOT contain the HEAD reference, and
because the "HEAD" file is not valid anymore, it is impossible for the
remote client to figure out the default branch without changing the
protocol. This shortcoming needs to be handled in a subsequent patch
series.
As the reftable library has already been introduced a while ago, this
commit message will not go into the details of how exactly the on-disk
format works. Please refer to our preexisting technical documentation at
Documentation/technical/reftable for this.
[1]: https://public-inbox.org/git/CAJo=hJtyof=HRy=2sLP0ng0uZ4=S-DpZ5dR1aF+VHVETKG20OQ@mail.gmail.com/
Original-idea-by: Shawn Pearce <spearce@spearce.org>
Based-on-patch-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define "special ref" as a very narrow set that consists of
FETCH_HEAD and MERGE_HEAD, and clarify everything else that used to
be classified as such are actually just pseudorefs.
* ps/not-so-many-refs-are-special:
Documentation: add "special refs" to the glossary
refs: redefine special refs
refs: convert MERGE_AUTOSTASH to become a normal pseudo-ref
sequencer: introduce functions to handle autostashes via refs
refs: convert AUTO_MERGE to become a normal pseudo-ref
sequencer: delete REBASE_HEAD in correct repo when picking commits
sequencer: clean up pseudo refs with REF_NO_DEREF
Instead of manually creating refs/ hierarchy on disk upon a
creation of a secondary worktree, which is only usable via the
files backend, use the refs API to populate it.
* ps/worktree-refdb-initialization:
builtin/worktree: create refdb via ref backend
worktree: expose interface to look up worktree by name
builtin/worktree: move setup of commondir file earlier
refs/files: skip creation of "refs/{heads,tags}" for worktrees
setup: move creation of "refs/" into the files backend
refs: prepare `refs_init_db()` for initializing worktree refs
Now that our list of special refs really only contains refs which have
actually-special semantics, let's redefine what makes a special ref.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the preceding conversion of the AUTO_MERGE pseudo-ref, let's
convert the MERGE_AUTOSTASH ref to become a normal pseudo-ref as well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 70c70de616 (refs: complete list of special refs, 2023-12-14) we have
inrtoduced a new `is_special_ref()` function that classifies some refs
as being special. The rule is that special refs are exclusively read and
written via the filesystem directly, whereas normal refs exclucsively go
via the refs API.
The intent of that commit was to record the status quo so that we know
to route reads of such special refs consistently. Eventually, the list
should be reduced to its bare minimum of refs which really are special,
namely FETCH_HEAD and MERGE_HEAD.
Follow up on this promise and convert the AUTO_MERGE ref to become a
normal pseudo-ref by using the refs API to both read and write it
instead of accessing the filesystem directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new extension "refstorage" so that we can mark a
repository that uses a non-default ref backend, like reftable.
* ps/refstorage-extension:
t9500: write "extensions.refstorage" into config
builtin/clone: introduce `--ref-format=` value flag
builtin/init: introduce `--ref-format=` value flag
builtin/rev-parse: introduce `--show-ref-format` flag
t: introduce GIT_TEST_DEFAULT_REF_FORMAT envvar
setup: introduce GIT_DEFAULT_REF_FORMAT envvar
setup: introduce "extensions.refStorage" extension
setup: set repository's formats on init
setup: start tracking ref storage format
refs: refactor logic to look up storage backends
worktree: skip reading HEAD when repairing worktrees
t: introduce DEFAULT_REPO_FORMAT prereq
The purpose of `refs_init_db()` is to initialize the on-disk files of a
new ref database. The function is quite inflexible right now though, as
callers can neither specify the `struct ref_store` nor can they pass any
flags.
Refactor the interface to accept both of these. This will be required so
that we can start initializing per-worktree ref databases via the ref
backend instead of open-coding the initialization in "worktree.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assorted changes around pseudoref handling.
* ps/pseudo-refs:
bisect: consistently write BISECT_EXPECTED_REV via the refdb
refs: complete list of special refs
refs: propagate errno when reading special refs fails
wt-status: read HEAD and ORIG_HEAD via the refdb
In order to discern which ref storage format a repository is supposed to
use we need to start setting up and/or discovering the format. This
needs to happen in two separate code paths.
- The first path is when we create a repository via `init_db()`. When
we are re-initializing a preexisting repository we need to retain
the previously used ref storage format -- if the user asked for a
different format then this indicates an error and we error out.
Otherwise we either initialize the repository with the format asked
for by the user or the default format, which currently is the
"files" backend.
- The second path is when discovering repositories, where we need to
read the config of that repository. There is not yet any way to
configure something other than the "files" backend, so we can just
blindly set the ref storage format to this backend.
Wire up this logic so that we have the ref storage format always readily
available when needed. As there is only a single backend and because it
is not configurable we cannot yet verify that this tracking works as
expected via tests, but tests will be added in subsequent commits. To
countermand this ommission now though, raise a BUG() in case the ref
storage format is not set up properly in `ref_store_init()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to look up ref storage backends, we're currently using a linked
list of backends, where each backend is expected to set up its `next`
pointer to the next ref storage backend. This is kind of a weird setup
as backends need to be aware of other backends without much of a reason.
Refactor the code so that the array of backends is centrally defined in
"refs.c", where each backend is now identified by an integer constant.
Expose functions to translate from those integer constants to the name
and vice versa, which will be required by subsequent patches.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're inconsistently writing BISECT_EXPECTED_REV both via the filesystem
and via the refdb, which violates the newly established rules for how
special refs must be treated. This works alright in practice with the
reffiles reference backend, but will cause bugs once we gain additional
backends.
Fix this issue and consistently write BISECT_EXPECTED_REV via the refdb
so that it is no longer a special ref.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have some references that are more special than others. The reason
for them being special is that they either do not follow the usual
format of references, or that they are written to the filesystem
directly by the respective owning subsystem and thus circumvent the
reference backend.
This works perfectly fine right now because the reffiles backend will
know how to read those refs just fine. But with the prospect of gaining
a new reference backend implementation we need to be a lot more careful
here:
- We need to make sure that we are consistent about how those refs are
written. They must either always be written via the filesystem, or
they must always be written via the reference backend. Any mixture
will lead to inconsistent state.
- We need to make sure that such special refs are always handled
specially when reading them.
We're already mostly good with regard to the first item, except for
`BISECT_EXPECTED_REV` which will be addressed in a subsequent commit.
But the current list of special refs is missing some refs that really
should be treated specially. Right now, we only treat `FETCH_HEAD` and
`MERGE_HEAD` specially here.
Introduce a new function `is_special_ref()` that contains all current
instances of special refs to fix the reading path.
Note that this is only a temporary measure where we record and rectify
the current state. Ideally, the list of special refs should in the end
only contain `FETCH_HEAD` and `MERGE_HEAD` again because they both may
reference multiple objects and can contain annotations, so they indeed
are special.
Based-on-patch-by: Han-Wen Nienhuys <hanwenn@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some refs in Git are more special than others due to reasons explained
in the next commit. These refs are read via `refs_read_special_head()`,
but this function doesn't behave the same as when we try to read a
normal ref. Most importantly, we do not propagate `failure_errno` in the
case where the reference does not exist, which is behaviour that we rely
on in many parts of Git.
Fix this bug by propagating errno when `strbuf_read_file()` fails.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the files and the packed-refs reference backends now use the same
generic transactions-based code to delete references. Let's pull these
implementations up into `refs_delete_refs()` to deduplicate the code.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark-up unused parameters in the code so that we can eventually
enable -Wunused-parameter by default.
* jk/unused-parameter:
t/helper: mark unused callback void data parameters
tag: mark unused parameters in each_tag_name_fn callbacks
rev-parse: mark unused parameter in for_each_abbrev callback
replace: mark unused parameter in each_mergetag_fn callback
replace: mark unused parameter in ref callback
merge-tree: mark unused parameter in traverse callback
fsck: mark unused parameters in various fsck callbacks
revisions: drop unused "opt" parameter in "tweak" callbacks
count-objects: mark unused parameter in alternates callback
am: mark unused keep_cr parameters
http-push: mark unused parameter in xml callback
http: mark unused parameters in curl callbacks
do_for_each_ref_helper(): mark unused repository parameter
test-ref-store: drop unimplemented reflog-expire command
Enumerating refs in the packed-refs file, while excluding refs that
match certain patterns, has been optimized.
* tb/refs-exclusion-and-packed-refs:
ls-refs.c: avoid enumerating hidden refs where possible
upload-pack.c: avoid enumerating hidden refs where possible
builtin/receive-pack.c: avoid enumerating hidden references
refs.h: implement `hidden_refs_to_excludes()`
refs.h: let `for_each_namespaced_ref()` take excluded patterns
revision.h: store hidden refs in a `strvec`
refs/packed-backend.c: add trace2 counters for jump list
refs/packed-backend.c: implement jump lists to avoid excluded pattern(s)
refs/packed-backend.c: refactor `find_reference_location()`
refs: plumb `exclude_patterns` argument throughout
builtin/for-each-ref.c: add `--exclude` option
ref-filter.c: parameterize match functions over patterns
ref-filter: add `ref_filter_clear()`
ref-filter: clear reachable list pointers after freeing
ref-filter.h: provide `REF_FILTER_INIT`
refs.c: rename `ref_filter`
This function gets a repository parameter because it's a callback for
do_for_each_repo_ref_iterator(). But it's just a wrapper that passes
along each call to a regular each_ref_fn callback, and the latter
doesn't accept a repository argument.
Probably in the long run all of the each_ref_fn callbacks should get a
repository parameter, too. But changing that now would require updates
all over the code base. Until that happens, let's annotate this wrapper
callback to quiet the compiler's -Wunused-parameter warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In subsequent commits, we'll teach `receive-pack` and `upload-pack` to
use the new jump list feature in the packed-refs iterator by ignoring
references which are mentioned via its respective hideRefs lists.
However, the packed-ref jump lists cannot handle un-hiding rules (that
begin with '!'), or namespace comparisons (that begin with '^'). Add a
convenience function to the refs.h API to detect when either of these
conditions are met, and returns an appropriate value to pass as excluded
patterns.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future commit will want to call `for_each_namespaced_ref()` with
a list of excluded patterns.
We could introduce a variant of that function, say,
`for_each_namespaced_ref_exclude()` which takes the extra parameter, and
reimplement the original function in terms of that. But all but one
caller (in `http-backend.c`) will supply the new parameter, so add the
new parameter to `for_each_namespaced_ref()` itself instead of
introducing a new function.
For now, supply NULL for the list of excluded patterns at all callers to
avoid changing behavior, which we will do in a future change.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In subsequent commits, it will be convenient to have a 'const char **'
of hidden refs (matching `transfer.hiderefs`, `uploadpack.hideRefs`,
etc.), instead of a `string_list`.
Convert spots throughout the tree that store the list of hidden refs
from a `string_list` to a `strvec`.
Note that in `parse_hide_refs_config()` there is an ugly const-cast used
to avoid an extra copy of each value before trimming any trailing slash
characters. This could instead be written as:
ref = xstrdup(value);
len = strlen(ref);
while (len && ref[len - 1] == '/')
ref[--len] = '\0';
strvec_push(hide_refs, ref);
free(ref);
but the double-copy (once when calling `xstrdup()`, and another via
`strvec_push()`) is wasteful.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subsequent patch will want to access an optional `excluded_patterns`
array within `refs/packed-backend.c` that will cull out certain
references matching any of the given patterns on a best-effort basis.
To do so, the refs subsystem needs to be updated to pass this value
across a number of different locations.
Prepare for a future patch by introducing this plumbing now, passing
NULLs at top-level APIs in order to make that patch less noisy and more
easily readable.
Signed-off-by: Taylor Blau <me@ttaylorr.co>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refs machinery has its own implementation of a `ref_filter` (used by
`for-each-ref`), which is distinct from the `ref-filter.h` API (also
used by `for-each-ref`, among other things).
Rename the one within refs.c to more clearly indicate its purpose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The include of wildmatch.h in git-compat-util.h was added in cebcab189a
(Makefile: add USE_WILDMATCH to use wildmatch as fnmatch, 2013-01-01) as
a way to be able to compile-time force any calls to fnmatch() to instead
invoke wildmatch(). The defines and inline function were removed in
70a8fc999d (stop using fnmatch (either native or compat), 2014-02-15),
and this include in git-compat-util.h has been unnecessary ever since.
Remove the include from git-compat-util.h, but add it to the .c files
that had omitted the direct #include they needed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At GitLab, we have a system that creates ephemeral internal refs that
don't live long before getting deleted. Having an option to exclude
certain refs from a packed-refs file allows these internal references to
be deleted much more efficiently.
Add an --exclude option to the pack-refs builtin, and use the ref
exclusions API to exclude certain refs from being packed into the final
packed-refs file
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
In preceding commits we changed many calls to macros that were
providing a "the_repository" argument to invoke corresponding repo_*()
function instead. Let's follow-up and adjust references to those in
comments, which coccinelle didn't (and inherently can't) catch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since a64215b6cd ("object.h: stop depending on cache.h; make
cache.h depend on object.h", 2023-02-24), we have a few headers that
could have replaced their include of cache.h with an include of
object.h. Make that change now.
Some C files had to start including cache.h after this change (or some
smaller header it had brought in), because the C files were depending
on things from cache.h but were only formerly implicitly getting
cache.h through one of these headers being modified in this patch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
sscanf(3) used in "git symbolic-ref --short" implementation found
to be not working reliably on macOS in UTF-8 locales. Rewrite the
code to avoid sscanf() altogether to work it around.
* jk/shorten-unambiguous-ref-wo-sscanf:
shorten_unambiguous_ref(): avoid sscanf()
shorten_unambiguous_ref(): use NUM_REV_PARSE_RULES constant
shorten_unambiguous_ref(): avoid integer truncation
