Update osxkeychain backend with features required for the recent
credential subsystem.
* ba/osxkeychain-updates:
osxkeychain: store new attributes
osxkeychain: erase matching passwords only
osxkeychain: erase all matching credentials
osxkeychain: replace deprecated SecKeychain API
"git apply" has been updated to lift the hardcoded pathname length
limit, which in turn allowed a mksnpath() function that is no
longer used.
* rs/apply-lift-path-length-limit:
path: remove mksnpath()
apply: avoid fixed-size buffer in create_one_file()
Another "set -u" fix for the bash prompt (in contrib/) script.
* vs/complete-with-set-u-fix:
completion: protect prompt against unset SHOWUPSTREAM in nounset mode
completion: fix prompt with unset SHOWCONFLICTSTATE in nounset mode
d208bfdfef (credential: new attribute password_expiry_utc, 2023-02-18)
and a5c76569e7 (credential: new attribute oauth_refresh_token,
2023-04-21) introduced new credential attributes but support was missing
from git-credential-osxkeychain.
Support these attributes by appending the data to the password in the
keychain, separated by line breaks. Line breaks cannot appear in a git
credential password so it is an appropriate separator.
Fixes the remaining test failures with osxkeychain:
18 - helper (osxkeychain) gets password_expiry_utc
19 - helper (osxkeychain) overwrites when password_expiry_utc
changes
21 - helper (osxkeychain) gets oauth_refresh_token
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other credential helpers support deleting credentials that match a
specified password. See 7144dee3ec (credential/libsecret: erase matching
creds only, 2023-07-26) and cb626f8e5c (credential/wincred: erase
matching creds only, 2023-07-26).
Support this in osxkeychain too by extracting, decrypting and comparing
the stored password before deleting.
Fixes the following test failure with osxkeychain:
11 - helper (osxkeychain) does not erase a password distinct from
input
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other credential managers erased all matching credentials, as indicated
by a test case that osxkeychain failed:
15 - helper (osxkeychain) erases all matching credentials
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SecKeychain API was deprecated in macOS 10.10, nearly 10 years ago.
The replacement SecItem API however is available as far back as macOS
10.6.
While supporting older macOS was perhaps prevously a concern,
git-credential-osxkeychain already requires a minimum of macOS 10.7
since 5747c8072b (contrib/credential: avoid fixed-size buffer in
osxkeychain, 2023-05-01) so using the newer API should not regress the
range of macOS versions supported.
Adapting to use the newer SecItem API also happens to fix two test
failures in osxkeychain:
8 - helper (osxkeychain) overwrites on store
9 - helper (osxkeychain) can forget host
The new API is compatible with credentials saved with the older API.
Signed-off-by: Bo Anderson <mail@boanderson.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As it stands, the only call site of `__git_ps1_show_upstream` checks
that the `GIT_PS1_SHOWUPSTREAM` variable is set, so this is effectively
a no-op. However, that might change, and chances of noticing the
unprotected use might not be that high when it does.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`GIT_PS1_SHOWCONFLICTSTATE` is a user variable that might not be set,
causing errors when the shell is in `nounset` mode.
Take into account on access by falling back to an empty string.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove an ancient and not well maintained Hg-to-git migration
script from contrib/.
Acked-by: Stelian Pop <stelian@popies.net>
cf. <37e4cd61-b370-437e-bd42-f98f47d3ad32@popies.net>
* jk/drop-hg-to-git:
contrib: drop hg-to-git script
The hg-to-git script is full of command injection vulnerabilities
against malicious branch and tag names. It's also old and largely
unmaintained; the last commit was over 4 years ago, and the last code
change before that was from 2013. Users are better off with a modern
remote-helper tool like cinnabar or remote-hg.
So rather than spending time to fix it, let's just get rid of it.
Reported-by: Matthew Rollings <admin@stealthcopter.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge multiple sed and "grep | awk" invocations, finally use "sort -u"
instead of "sort | uniq".
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to complete the command line arguments to "git worktree"
subcommand (in contrib/) has been updated to correctly honor things
like "git -C dir" etc.
* rj/complete-worktree-paths-fix:
completion: fix __git_complete_worktree_paths
The command line completion script (in contrib/) learned to
complete "git reflog" better.
* rj/complete-reflog:
completion: reflog subcommands and options
completion: factor out __git_resolve_builtins
completion: introduce __git_find_subcommand
completion: reflog show <log-options>
completion: reflog with implicit "show"
Make generic the completion for reflog subcommands and its options.
Note that we still need to special case the options for "show".
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're going to use the result of "git xxx --git-completion-helper" not
only for feeding COMPREPLY.
Therefore, factor out the execution and the caching of its results in
__gitcomp_builtin, to a new function __git_resolve_builtins.
While we're here, move an important comment we have in the function to
its header, so it gains visibility.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's have a function to get the current subcommand when completing
commands that follow the syntax:
git <command> <subcommand>
As a convenience, let's allow an optional "default subcommand" to be
returned if none is found.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's add completion for <log-options> in "reflog show" so that the user
can easily discover uses like:
$ git reflog --since=1.day.ago
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no subcommand is specified to "reflog", we assume "show" [1]:
$ git reflog -h
usage: git reflog [show] [<log-options>] [<ref>]
...
This implicit "show" is not being completed correctly:
$ git checkout -b default
$ git reflog def<TAB><TAB>
... no completion options ...
The expected result is:
$ git reflog default
This happens because we're completing references after seeing a valid
subcommand in the command line. This prevents the implicit "show" from
working properly, but also introduces a new problem: it keeps offering
subcommand options when the subcommand is implicit:
$ git checkout -b explore
$ git reflog default ex<TAB>
...
$ git reflog default expire
The expected result is:
$ git reflog default explore
To fix this, complete references even if no subcommand is present, or in
other words when the subcommand is implicit "show".
Also, only include completion options for subcommands when completing
the right position in the command line.
1. cf39f54efc (git reflog show, 2007-02-08)
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Credential helper based on libsecret (in contrib/) has been updated
to handle an empty password correctly.
* mh/libsecret-empty-password-fix:
libsecret: retrieve empty password
Some parts of command line completion script (in contrib/) have
been micro-optimized.
* bb/completion-no-grep-into-awk:
completion: use awk for filtering the config entries
Use __git to invoke "worktree list" in __git_complete_worktree_paths, to
respect any "-C" and "--git-dir" options present on the command line.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Integrate the reftable code into the refs framework as a backend.
* ps/reftable-backend:
refs/reftable: fix leak when copying reflog fails
ci: add jobs to test with the reftable backend
refs: introduce reftable backend
Since 0ce02e2f (credential/libsecret: store new attributes, 2023-06-16)
a test that stores empty username and password fails when
t0303-credential-external.sh is run with
GIT_TEST_CREDENTIAL_HELPER=libsecret.
Retrieve empty password carefully. This fixes test:
ok 14 - helper (libsecret) can store empty username
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits 1e0ee4087e (completion: add and use
__git_compute_first_level_config_vars_for_section, 2024-02-10) and
6e32f718ff (completion: add and use
__git_compute_second_level_config_vars_for_section, 2024-02-10)
introduced new helpers for config completion.
Both helpers use a pipeline of grep and awk to filter the list of config
entries. awk is perfectly capable of filtering, so let's eliminate the
grep process and move the filtering into the awk script.
The "-E" grep option (extended syntax) was not necessary, as $section is
a single word.
While at it, wrap the over-long lines to make them more readable.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion script (in contrib/) learned to
complete configuration variable names better.
* pb/complete-config:
completion: add and use __git_compute_second_level_config_vars_for_section
completion: add and use __git_compute_first_level_config_vars_for_section
completion: complete 'submodule.*' config variables
completion: add space after config variable names also in Bash 3
Command line completion support (in contrib/) has been
updated for "git bisect".
* bk/complete-bisect:
completion: bisect: recognize but do not complete view subcommand
completion: bisect: complete log opts for visualize subcommand
completion: new function __git_complete_log_opts
completion: bisect: complete missing --first-parent and - -no-checkout options
completion: bisect: complete custom terms and related options
completion: bisect: complete bad, new, old, and help subcommands
completion: tests: always use 'master' for default initial branch name
In a previous commit we removed some hardcoded config variable names from
function __git_complete_config_variable_name in the completion script by
introducing a new function,
__git_compute_first_level_config_vars_for_section.
The remaining hardcoded config variables are "second level"
configuration variables, meaning 'branch.<name>.upstream',
'remote.<name>.url', etc. where <name> is a user-defined name.
Making use of the new existing --config flag to 'git help', add a new
function, __git_compute_second_level_config_vars_for_section. This
function takes as argument a config section name and computes the
corresponding second-level config variables, i.e. those that contain a
'<' which indicates the start of a placeholder. Note that as in
__git_compute_first_level_config_vars_for_section added previsouly, we
use indirect expansion instead of associative arrays to stay compatible
with Bash 3 on which macOS is stuck for licensing reasons.
As explained in the previous commit, we use the existing pattern in the
completion script of using global variables to cache the list of
variables for each section.
Use this new function and the variables it defines in
__git_complete_config_variable_name to remove hardcoded config
variables, and add a test to verify the new function. Use a single
'case' for all sections with second-level variables names, since the
code for each of them is now exactly the same.
Adjust the name of a test added in a previous commit to reflect that it
now tests the added function.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function __git_complete_config_variable_name in the Bash completion
script hardcodes several config variable names. These variables are
those in config sections where user-defined names can appear, such as
"branch.<name>". These sections are treated first by the case statement,
and the two last "catch all" cases are used for other sections, making
use of the __git_compute_config_vars and __git_compute_config_sections
function, which omit listing any variables containing wildcards or
placeholders. Having hardcoded config variables introduces the risk of
the completion code becoming out of sync with the actual config
variables accepted by Git.
To avoid these hardcoded config variables, introduce a new function,
__git_compute_first_level_config_vars_for_section, making use of the
existing __git_config_vars variable. This function takes as argument a
config section name and computes the matching "first level" config
variables for that section, i.e. those _not_ containing any placeholder,
like 'branch.autoSetupMerge, 'remote.pushDefault', etc. Use this
function and the variables it defines in the 'branch.*', 'remote.*' and
'submodule.*' switches of the case statement instead of hardcoding the
corresponding config variables. Note that we use indirect expansion to
create a variable for each section, instead of using a single
associative array indexed by section names, because associative arrays
are not supported in Bash 3, on which macOS is stuck for licensing
reasons.
Use the existing pattern in the completion script of using global
variables to cache the list of config variables for each section. The
rationale for such caching is explained in eaa4e6ee2a (Speed up bash
completion loading, 2009-11-17), and the current approach to using and
defining them via 'test -n' is explained in cf0ff02a38 (completion: work
around zsh option propagation bug, 2012-02-02).
Adjust the name of one of the tests added in the previous commit,
reflecting that it now also tests the new function.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the Bash completion script, function
__git_complete_config_variable_name completes config variables and has
special logic to deal with config variables involving user-defined
names, like branch.<name>.* and remote.<name>.*.
This special logic is missing for submodule-related config variables.
Add the appropriate branches to the case statement, making use of the
in-tree '.gitmodules' to list relevant submodules.
Add corresponding tests in t9902-completion.sh, making sure we complete
both first level submodule config variables as well as second level
variables involving submodule names.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In be6444d1ca (completion: bash: add correct suffix in variables,
2021-08-16), __git_complete_config_variable_name was changed to use
"${sfx- }" instead of "$sfx" as the fourth argument of _gitcomp_nl and
_gitcomp_nl_append, such that this argument evaluates to a space if sfx
is unset. This was to ensure that e.g.
git config branch.autoSetupMe[TAB]
correctly completes to 'branch.autoSetupMerge ' with the trailing space.
This commits notes that the fix only works in Bash 4 because in Bash 3
the 'local sfx' construct at the beginning of
__git_complete_config_variable_name creates an empty string.
Make the fix also work for Bash 3 by using the "unset or null' parameter
expansion syntax ("${sfx:- }"), such that the parameter is also expanded
to a space if it is set but null, as is the behaviour of 'local sfx' in
Bash 3.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for calling xstrncmpz() to compare a
NUL-terminated string with a buffer of a known length instead of using
strncmp() and checking the terminating NUL explicitly. This simplifies
callers by reducing code duplication.
I had to adjust remote.c manually because Coccinelle inexplicably
changed the indent of the else branches.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line completion script (in contrib/) learned to work better
with the reftable backend.
* sh/completion-with-reftable:
completion: support pseudoref existence checks for reftables
completion: refactor existence checks for pseudorefs
Newer versions of Getopt::Long started giving warnings against our
(ab)use of it in "git send-email". Bump the minimum version
requirement for Perl to 5.8.1 (from September 2002) to allow
simplifying our implementation.
* tz/send-email-negatable-options:
send-email: avoid duplicate specification warnings
perl: bump the required Perl version to 5.8.1 from 5.8.0
The wincred credential backend has been taught to support oauth refresh
token the same way as credential-cache and credential-libsecret backends.
* mh/credential-oauth-refresh-token-with-wincred:
credential/wincred: store oauth_refresh_token
Due to scalability issues, Shawn Pearce has originally proposed a new
"reftable" format more than six years ago [1]. Initially, this new
format was implemented in JGit with promising results. Around two years
ago, we have then added the "reftable" library to the Git codebase via
a4bbd13be3 (Merge branch 'hn/reftable', 2021-12-15). With this we have
landed all the low-level code to read and write reftables. Notably
missing though was the integration of this low-level code into the Git
code base in the form of a new ref backend that ties all of this
together.
This gap is now finally closed by introducing a new "reftable" backend
into the Git codebase. This new backend promises to bring some notable
improvements to Git repositories:
- It becomes possible to do truly atomic writes where either all refs
are committed to disk or none are. This was not possible with the
"files" backend because ref updates were split across multiple loose
files.
- The disk space required to store many refs is reduced, both compared
to loose refs and packed-refs. This is enabled both by the reftable
format being a binary format, which is more compact, and by prefix
compression.
- We can ignore filesystem-specific behaviour as ref names are not
encoded via paths anymore. This means there is no need to handle
case sensitivity on Windows systems or Unicode precomposition on
macOS.
- There is no need to rewrite the complete refdb anymore every time a
ref is being deleted like it was the case for packed-refs. This
means that ref deletions are now constant time instead of scaling
linearly with the number of refs.
- We can ignore file/directory conflicts so that it becomes possible
to store both "refs/heads/foo" and "refs/heads/foo/bar".
- Due to this property we can retain reflogs for deleted refs. We have
previously been deleting reflogs together with their refs to avoid
file/directory conflicts, which is not necessary anymore.
- We can properly enumerate all refs. With the "files" backend it is
not easily possible to distinguish between refs and non-refs because
they may live side by side in the gitdir.
Not all of these improvements are realized with the current "reftable"
backend implementation. At this point, the new backend is supposed to be
a drop-in replacement for the "files" backend that is used by basically
all Git repositories nowadays. It strives for 1:1 compatibility, which
means that a user can expect the same behaviour regardless of whether
they use the "reftable" backend or the "files" backend for most of the
part.
Most notably, this means we artificially limit the capabilities of the
"reftable" backend to match the limits of the "files" backend. It is not
possible to create refs that would end up with file/directory conflicts,
we do not retain reflogs, we perform stricter-than-necessary checks.
This is done intentionally due to two main reasons:
- It makes it significantly easier to land the "reftable" backend as
tests behave the same. It would be tough to argue for each and every
single test that doesn't pass with the "reftable" backend.
- It ensures compatibility between repositories that use the "files"
backend and repositories that use the "reftable" backend. Like this,
hosters can migrate their repositories to use the "reftable" backend
without causing issues for clients that use the "files" backend in
their clones.
It is expected that these artificial limitations may eventually go away
in the long term.
Performance-wise things very much depend on the actual workload. The
following benchmarks compare the "files" and "reftable" backends in the
current version:
- Creating N refs in separate transactions shows that the "files"
backend is ~50% faster. This is not surprising given that creating a
ref only requires us to create a single loose ref. The "reftable"
backend will also perform auto compaction on updates. In real-world
workloads we would likely also want to perform pack loose refs,
which would likely change the picture.
Benchmark 1: update-ref: create refs sequentially (refformat = files, refcount = 1)
Time (mean ± σ): 2.1 ms ± 0.3 ms [User: 0.6 ms, System: 1.7 ms]
Range (min … max): 1.8 ms … 4.3 ms 133 runs
Benchmark 2: update-ref: create refs sequentially (refformat = reftable, refcount = 1)
Time (mean ± σ): 2.7 ms ± 0.1 ms [User: 0.6 ms, System: 2.2 ms]
Range (min … max): 2.4 ms … 2.9 ms 132 runs
Benchmark 3: update-ref: create refs sequentially (refformat = files, refcount = 1000)
Time (mean ± σ): 1.975 s ± 0.006 s [User: 0.437 s, System: 1.535 s]
Range (min … max): 1.969 s … 1.980 s 3 runs
Benchmark 4: update-ref: create refs sequentially (refformat = reftable, refcount = 1000)
Time (mean ± σ): 2.611 s ± 0.013 s [User: 0.782 s, System: 1.825 s]
Range (min … max): 2.597 s … 2.622 s 3 runs
Benchmark 5: update-ref: create refs sequentially (refformat = files, refcount = 100000)
Time (mean ± σ): 198.442 s ± 0.241 s [User: 43.051 s, System: 155.250 s]
Range (min … max): 198.189 s … 198.670 s 3 runs
Benchmark 6: update-ref: create refs sequentially (refformat = reftable, refcount = 100000)
Time (mean ± σ): 294.509 s ± 4.269 s [User: 104.046 s, System: 190.326 s]
Range (min … max): 290.223 s … 298.761 s 3 runs
- Creating N refs in a single transaction shows that the "files"
backend is significantly slower once we start to write many refs.
The "reftable" backend only needs to update two files, whereas the
"files" backend needs to write one file per ref.
Benchmark 1: update-ref: create many refs (refformat = files, refcount = 1)
Time (mean ± σ): 1.9 ms ± 0.1 ms [User: 0.4 ms, System: 1.4 ms]
Range (min … max): 1.8 ms … 2.6 ms 151 runs
Benchmark 2: update-ref: create many refs (refformat = reftable, refcount = 1)
Time (mean ± σ): 2.5 ms ± 0.1 ms [User: 0.7 ms, System: 1.7 ms]
Range (min … max): 2.4 ms … 3.4 ms 148 runs
Benchmark 3: update-ref: create many refs (refformat = files, refcount = 1000)
Time (mean ± σ): 152.5 ms ± 5.2 ms [User: 19.1 ms, System: 133.1 ms]
Range (min … max): 148.5 ms … 167.8 ms 15 runs
Benchmark 4: update-ref: create many refs (refformat = reftable, refcount = 1000)
Time (mean ± σ): 58.0 ms ± 2.5 ms [User: 28.4 ms, System: 29.4 ms]
Range (min … max): 56.3 ms … 72.9 ms 40 runs
Benchmark 5: update-ref: create many refs (refformat = files, refcount = 1000000)
Time (mean ± σ): 152.752 s ± 0.710 s [User: 20.315 s, System: 131.310 s]
Range (min … max): 152.165 s … 153.542 s 3 runs
Benchmark 6: update-ref: create many refs (refformat = reftable, refcount = 1000000)
Time (mean ± σ): 51.912 s ± 0.127 s [User: 26.483 s, System: 25.424 s]
Range (min … max): 51.769 s … 52.012 s 3 runs
- Deleting a ref in a fully-packed repository shows that the "files"
backend scales with the number of refs. The "reftable" backend has
constant-time deletions.
Benchmark 1: update-ref: delete ref (refformat = files, refcount = 1)
Time (mean ± σ): 1.7 ms ± 0.1 ms [User: 0.4 ms, System: 1.2 ms]
Range (min … max): 1.6 ms … 2.1 ms 316 runs
Benchmark 2: update-ref: delete ref (refformat = reftable, refcount = 1)
Time (mean ± σ): 1.8 ms ± 0.1 ms [User: 0.4 ms, System: 1.3 ms]
Range (min … max): 1.7 ms … 2.1 ms 294 runs
Benchmark 3: update-ref: delete ref (refformat = files, refcount = 1000)
Time (mean ± σ): 2.0 ms ± 0.1 ms [User: 0.5 ms, System: 1.4 ms]
Range (min … max): 1.9 ms … 2.5 ms 287 runs
Benchmark 4: update-ref: delete ref (refformat = reftable, refcount = 1000)
Time (mean ± σ): 1.9 ms ± 0.1 ms [User: 0.5 ms, System: 1.3 ms]
Range (min … max): 1.8 ms … 2.1 ms 217 runs
Benchmark 5: update-ref: delete ref (refformat = files, refcount = 1000000)
Time (mean ± σ): 229.8 ms ± 7.9 ms [User: 182.6 ms, System: 46.8 ms]
Range (min … max): 224.6 ms … 245.2 ms 6 runs
Benchmark 6: update-ref: delete ref (refformat = reftable, refcount = 1000000)
Time (mean ± σ): 2.0 ms ± 0.0 ms [User: 0.6 ms, System: 1.3 ms]
Range (min … max): 2.0 ms … 2.1 ms 3 runs
- Listing all refs shows no significant advantage for either of the
backends. The "files" backend is a bit faster, but not by a
significant margin. When repositories are not packed the "reftable"
backend outperforms the "files" backend because the "reftable"
backend performs auto-compaction.
Benchmark 1: show-ref: print all refs (refformat = files, refcount = 1, packed = true)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 2.0 ms 1729 runs
Benchmark 2: show-ref: print all refs (refformat = reftable, refcount = 1, packed = true)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 1.8 ms 1816 runs
Benchmark 3: show-ref: print all refs (refformat = files, refcount = 1000, packed = true)
Time (mean ± σ): 4.3 ms ± 0.1 ms [User: 0.9 ms, System: 3.3 ms]
Range (min … max): 4.1 ms … 4.6 ms 645 runs
Benchmark 4: show-ref: print all refs (refformat = reftable, refcount = 1000, packed = true)
Time (mean ± σ): 4.5 ms ± 0.2 ms [User: 1.0 ms, System: 3.3 ms]
Range (min … max): 4.2 ms … 5.9 ms 643 runs
Benchmark 5: show-ref: print all refs (refformat = files, refcount = 1000000, packed = true)
Time (mean ± σ): 2.537 s ± 0.034 s [User: 0.488 s, System: 2.048 s]
Range (min … max): 2.511 s … 2.627 s 10 runs
Benchmark 6: show-ref: print all refs (refformat = reftable, refcount = 1000000, packed = true)
Time (mean ± σ): 2.712 s ± 0.017 s [User: 0.653 s, System: 2.059 s]
Range (min … max): 2.692 s … 2.752 s 10 runs
Benchmark 7: show-ref: print all refs (refformat = files, refcount = 1, packed = false)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 1.9 ms 1834 runs
Benchmark 8: show-ref: print all refs (refformat = reftable, refcount = 1, packed = false)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.4 ms … 2.0 ms 1840 runs
Benchmark 9: show-ref: print all refs (refformat = files, refcount = 1000, packed = false)
Time (mean ± σ): 13.8 ms ± 0.2 ms [User: 2.8 ms, System: 10.8 ms]
Range (min … max): 13.3 ms … 14.5 ms 208 runs
Benchmark 10: show-ref: print all refs (refformat = reftable, refcount = 1000, packed = false)
Time (mean ± σ): 4.5 ms ± 0.2 ms [User: 1.2 ms, System: 3.3 ms]
Range (min … max): 4.3 ms … 6.2 ms 624 runs
Benchmark 11: show-ref: print all refs (refformat = files, refcount = 1000000, packed = false)
Time (mean ± σ): 12.127 s ± 0.129 s [User: 2.675 s, System: 9.451 s]
Range (min … max): 11.965 s … 12.370 s 10 runs
Benchmark 12: show-ref: print all refs (refformat = reftable, refcount = 1000000, packed = false)
Time (mean ± σ): 2.799 s ± 0.022 s [User: 0.735 s, System: 2.063 s]
Range (min … max): 2.769 s … 2.836 s 10 runs
- Printing a single ref shows no real difference between the "files"
and "reftable" backends.
Benchmark 1: show-ref: print single ref (refformat = files, refcount = 1)
Time (mean ± σ): 1.5 ms ± 0.1 ms [User: 0.4 ms, System: 1.0 ms]
Range (min … max): 1.4 ms … 1.8 ms 1779 runs
Benchmark 2: show-ref: print single ref (refformat = reftable, refcount = 1)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.4 ms … 2.5 ms 1753 runs
Benchmark 3: show-ref: print single ref (refformat = files, refcount = 1000)
Time (mean ± σ): 1.5 ms ± 0.1 ms [User: 0.3 ms, System: 1.1 ms]
Range (min … max): 1.4 ms … 1.9 ms 1840 runs
Benchmark 4: show-ref: print single ref (refformat = reftable, refcount = 1000)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 2.0 ms 1831 runs
Benchmark 5: show-ref: print single ref (refformat = files, refcount = 1000000)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 2.1 ms 1848 runs
Benchmark 6: show-ref: print single ref (refformat = reftable, refcount = 1000000)
Time (mean ± σ): 1.6 ms ± 0.1 ms [User: 0.4 ms, System: 1.1 ms]
Range (min … max): 1.5 ms … 2.1 ms 1762 runs
So overall, performance depends on the usecases. Except for many
sequential writes the "reftable" backend is roughly on par or
significantly faster than the "files" backend though. Given that the
"files" backend has received 18 years of optimizations by now this can
be seen as a win. Furthermore, we can expect that the "reftable" backend
will grow faster over time when attention turns more towards
optimizations.
The complete test suite passes, except for those tests explicitly marked
to require the REFFILES prerequisite. Some tests in t0610 are marked as
failing because they depend on still-in-flight bug fixes. Tests can be
run with the new backend by setting the GIT_TEST_DEFAULT_REF_FORMAT
environment variable to "reftable".
There is a single known conceptual incompatibility with the dumb HTTP
transport. As "info/refs" SHOULD NOT contain the HEAD reference, and
because the "HEAD" file is not valid anymore, it is impossible for the
remote client to figure out the default branch without changing the
protocol. This shortcoming needs to be handled in a subsequent patch
series.
As the reftable library has already been introduced a while ago, this
commit message will not go into the details of how exactly the on-disk
format works. Please refer to our preexisting technical documentation at
Documentation/technical/reftable for this.
[1]: https://public-inbox.org/git/CAJo=hJtyof=HRy=2sLP0ng0uZ4=S-DpZ5dR1aF+VHVETKG20OQ@mail.gmail.com/
Original-idea-by: Shawn Pearce <spearce@spearce.org>
Based-on-patch-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "view" alias for the visualize subcommand is neither completed nor
recognized. It's undesirable to complete it because it's first letters
are the same as for visualize, making completion less rather than more
efficient without adding much in the way of interface discovery.
However, it needs to be recognized in order to enable log option
completion for it.
Recognize but do not complete the view command by creating and using
separate lists of completable_subcommands and all_subcommands. Add
tests.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Arguments passed to the "visualize" subcommand of git-bisect(1) get
forwarded to git-log(1). It thus supports the same options as git-log(1)
would, but our Bash completion script does not know to handle this.
Make completion of porcelain git-log options and option arguments to the
visualize subcommand work by calling __git_complete_log_opts when the
start of an option to the subcommand is seen (visualize doesn't support
any options besides the git-log options). Add test.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options accepted by git-log are also accepted by at least one other
command (git-bisect). Factor the common option completion code into a
new function and use it from _git_log. The new function leaves
COMPREPLY empty if no option candidates are found, so that callers can
safely check it to determine if completion for other arguments should be
attempted.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --first-parent and --no-checkout options to the start subcommand of
git-bisect(1) are not completed.
Enable completion of the --first-parent and --no-checkout options to the
start subcommand. Add test.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git bisect supports the use of custom terms via the --term-(new|bad) and
--term-(old|good) options, but the completion code doesn't know about
these options or the new subcommands they define.
Add support for these options and the custom subcommands by checking for
BISECT_TERMS and adding them to the list of subcommands. Add tests.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bad, new, old and help subcommands to git-bisect(1) are not
completed.
Add the bad, new, old, and help subcommands to the appropriate lists
such that the commands and their possible ref arguments are completed.
Add tests.
Signed-off-by: Britton Leo Kerin <britton.kerin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script (in contrib/) learned more options that can
be used with "git log".
* pb/complete-log-more:
completion: complete missing 'git log' options
completion: complete --encoding
completion: complete --patch-with-raw
completion: complete missing rev-list options
a5c7656 (credential: new attribute oauth_refresh_token) introduced
a new confidential credential attribute and added support to
credential-cache. Later 0ce02e2f (credential/libsecret: store new
attributes, 2023-06-16) added support in credential-libsecret.
To add support in credential-wincred, we encode the new attribute in the
CredentialBlob, separated by newline:
hunter2
oauth_refresh_token=xyzzy
This is extensible and backwards compatible. The credential protocol
already assumes that attribute values do not contain newlines.
This fixes test "helper (wincred) gets oauth_refresh_token" when
t0303-credential-external.sh is run with
GIT_TEST_CREDENTIAL_HELPER=wincred. This test was added in a5c76569e7
(credential: new attribute oauth_refresh_token, 2023-04-21).
Alternatives considered: store oauth_refresh_token in a wincred
attribute. This would be insecure because wincred assumes attribute
values to be non-confidential.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completion update to prepare for reftable
* ps/completion-with-reftable-fix:
completion: treat dangling symrefs as existing pseudorefs
completion: silence pseudoref existence check
completion: improve existence check for pseudo-refs
t9902: verify that completion does not print anything
completion: discover repo path in `__git_pseudoref_exists ()`
When there are multiple subtrees present in a repository and they are
all using 'git subtree split', the 'split' command can take a
significant (and constantly growing) amount of time to run even when
using the '--rejoin' flag. This is due to the fact that when processing
commits to determine the last known split to start from when looking
for changes, if there has been a split/merge done from another subtree
there will be 2 split commits, one mainline and one subtree, for the
second subtree that are part of the processing. The non-mainline
subtree split commit will cause the processing to always need to search
the entire history of the given subtree as part of its processing even
though those commits are totally irrelevant to the current subtree
split being run.
To see this in practice you can use the open source GitHub repo
'apollo-ios-dev' and do the following in order:
-Make a changes to a file in 'apollo-ios' and 'apollo-ios-codegen'
directories
-Create a commit containing these changes
-Do a split on apollo-ios-codegen
- Do a fetch on the subtree repo
- git fetch git@github.com:apollographql/apollo-ios-codegen.git
- git subtree split --prefix=apollo-ios-codegen --squash --rejoin
- Depending on the current state of the 'apollo-ios-dev' repo
you may see the issue at this point if the last split was on
apollo-ios
-Do a split on apollo-ios
- Do a fetch on the subtree repo
- git fetch git@github.com:apollographql/apollo-ios.git
- git subtree split --prefix=apollo-ios --squash --rejoin
-Make changes to a file in apollo-ios-codegen
-Create a commit containing the change(s)
-Do a split on apollo-ios-codegen
- git subtree split --prefix=apollo-ios-codegen --squash --rejoin
-To see that the patch fixes the issue you can use the custom subtree
script in the repo so following the same steps as above, except
instead of using 'git subtree ...' for the commands use
'git-subtree.sh ...' for the commands
You will see that the final split is looking for the last split
on apollo-ios-codegen to use as it's starting point to process
commits. Since there is a split commit from apollo-ios in between the
2 splits run on apollo-ios-codegen, the processing ends up traversing
the entire history of apollo-ios which increases the time it takes to
do a split based on how long of a history apollo-ios has, while none
of these commits are relevant to the split being done on
apollo-ios-codegen.
So this commit makes a change to the processing of commits for the
split command in order to ignore non-mainline commits from other
subtrees such as apollo-ios in the above breakdown by adding a new
function 'should_ignore_subtree_commit' which is called during
'process_split_commit'. This allows the split/rejoin processing to
still function as expected but removes all of the unnecessary
processing that takes place currently which greatly inflates the
processing time. In the above example, previously the final split
would take ~10-12 minutes, while after this fix it takes seconds.
Added a test to validate that the proposed fix
solves the issue.
The test accomplishes this by checking the output
of the split command to ensure the output from
the progress of 'process_split_commit' function
that represents the 'extracount' of commits
processed remains at 0, meaning none of the commits
from the second subtree were processed.
This was tested against the original functionality
to show the test failed, and then with this fix
to show the test passes.
This illustrated that when using multiple subtrees,
A and B, when doing a split on subtree B, the
processing does not traverse the entire history
of subtree A which is unnecessary and would cause
the 'extracount' of processed commits to climb
based on the number of commits in the history of
subtree A.
Signed-off-by: Zach FettersMoore <zach.fetters@apollographql.com>
Reviewed-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
