When the index read in 'do_read_index()' does not exist on-disk, mark the
index "sparse" if the executing command does not require a full index and
sparse index is otherwise enabled.
Some commands (such as 'git stash -u') implicitly create a new index (when
the 'GIT_INDEX_FILE' variable points to a non-existent file) and perform
some operation on it. However, when this index is created, it isn't created
with the same sparsity settings as the repo index. As a result, while these
indexes may be sparse during the operation, they are always expanded before
being written to disk. We can avoid that expansion by defaulting the index
to "sparse", in which case it will only be expanded if the full index is
needed.
Note that the function 'set_new_index_sparsity()' is created despite having
only a single caller because additional callers will be added in a
subsequent patch.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable sparse index in 'git stash' by disabling
'command_requires_full_index'.
With sparse index enabled, some subcommands of 'stash' work without
expanding the index, e.g., 'git stash', 'git stash list', 'git stash drop',
etc. Others ensure the index is expanded either directly (as in the case of
'git stash [pop|apply]', where the call to 'merge_recursive_generic()' in
'do_apply_stash()' triggers the expansion), or in a command called
internally by stash (e.g., 'git update-index' in 'git stash -u'). So, in
addition to enabling sparse index, add tests to 't1092' demonstrating which
variants of 'git stash' expand the index, and which do not.
Finally, add the option to skip writing 'untracked.txt' in
'ensure_not_expanded', and use that option to successfully apply stashed
untracked files without a conflict in 'untracked.txt'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests verifying expected 'git stash' behavior in
't1092-sparse-checkout-compatibility'. These cases establish the expected
behavior of 'git stash' in a sparse-checkout and verify consistency both
with and without a sparse index. Although no sparse index compatibility has
been integrated into 'git stash' yet, the tests are all 'expect_success' -
we don't want the cone-mode sparse-checkout behavior to change depending on
whether it is using a sparse index or not. Therefore, we expect these tests
to continue passing once sparse index is integrated with 'git stash'.
Additionally, add performance test cases for 'git stash' both with and
without untracked files. Note that, unlike the other tests in
'p2000-sparse-operations.sh', the tests added for 'stash' are combination
operations. This is done to ensure the stash/unstash is not blocked by the
modification of '$SPARSE_CONE/a' performed as part of 'test_perf_on_all'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git remote -v` (`--verbose`) lists down the names of remotes along with
their URLs. It would be beneficial for users to also specify the filter
types for promisor remotes. Something like this -
origin remote-url (fetch) [blob:none]
origin remote-url (push)
Teach `git remote -v` to also specify the filters for promisor remotes.
Closes: https://github.com/gitgitgadget/git/issues/1211
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
source: <c36896a1-6247-123b-4fa3-b7eb24af1897@web.de>
* rs/format-patch-pathspec-fix:
2.36 format-patch regression fix
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
source: <2c988c7b-0efe-4222-4a43-8124fe1a9da6@web.de>
* rs/fast-export-pathspec-fix:
2.36 fast-export regression fix
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
source: <xmqqo80j87g0.fsf_-_@gitster.g>
* jc/show-pathspec-fix:
2.36 show regression fix
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <xmqq7d7bsu2n.fsf@gitster.g>
* jc/diff-tree-stdin-fix:
2.36 gitk/diff-tree --stdin regression fix
"git submodule update" without pathspec should silently skip an
uninitialized submodule, but it started to become noisy by mistake.
This fixes a regression in 2.36 and is slate to go to 2.36.1
source: <pull.1258.v2.git.git.1650890741430.gitgitgadget@gmail.com>
* gc/submodule-update-part2:
submodule--helper: fix initialization of warn_if_uninitialized
git-p4 is designed to run correctly under python2.7 and python3, but
its functional behavior wrt importing user-entered text differs across
these environments:
Under python2, git-p4 "naively" writes the Perforce bytestream into git
metadata (and does not set an "encoding" header on the commits); this
means that any non-utf-8 byte sequences end up creating invalidly-encoded
commit metadata in git.
Under python3, git-p4 attempts to decode the Perforce bytestream as utf-8
data, and fails badly (with an unhelpful error) when non-utf-8 data is
encountered.
Perforce clients (especially p4v) encourage user entry of changelist
descriptions (and user full names) in OS-local encoding, and store the
resulting bytestream to the server unmodified - such that different
clients can end up creating mutually-unintelligible messages. The most
common inconsistency, in many Perforce environments, is likely to be utf-8
(typical in linux) vs cp-1252 (typical in windows).
Make the changelist-description- and user-fullname-handling code
python-runtime-agnostic, introducing three "strategies" selectable via
config:
- 'passthrough', behaving as previously under python2,
- 'strict', behaving as previously under python3, and
- 'fallback', favoring utf-8 but supporting a secondary encoding when
utf-8 decoding fails, and finally escaping high-range bytes if the
decoding with the secondary encoding also fails.
Keep the python2 default behavior as-is ('legacy' strategy), but switch
the python3 default strategy to 'fallback' with default fallback encoding
'cp1252'.
Also include tests exercising these encoding strategies, documentation for
the new config, and improve the user-facing error messages when decoding
does fail.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
* rs/format-patch-pathspec-fix:
2.36 format-patch regression fix
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
* rs/fast-export-pathspec-fix:
2.36 fast-export regression fix
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
* jc/show-pathspec-fix:
2.36 show regression fix
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git fast-export doesn't set no_free, so path limiting stopped working
after the first commit. Set the flag and add a basic test to make sure
only changes to the specified files are exported.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git format-patch only sets no_free when --output is given, causing it to
forget pathspecs after the first commit. Set no_free unconditionally
instead.
The existing test was unable to detect this breakage because it checks
stderr for the absence of a certain string, but format-patch writes to
stdout. Also the test was not checking the case of one commit modifying
multiple files and a pathspec limiting the diff. Replace it with a more
thorough one.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
e900d494 (diff: add an API for deferred freeing, 2021-02-11)
introduced a mechanism to delay freeing resources held in
diff_options struct that need to be kept as long as the struct will
be reused to compute diff. "git log -p" was taught to utilize the
mechanism but it was done with an incorrect assumption that the
underlying helper function, cmd_log_walk(), is called only once,
and it is OK to do the freeing at the end of it.
Alas, for "git show A B", the function is called once for each
commit given, so it is not OK to free the resources until we finish
calling it for all the commits given from the command line.
During 2.36 release cycle, we started clearing the <pathspec> as
part of this freeing, which made the bug a lot more visible.
Fix this breakage by tweaking how cmd_log_walk() frees the resources
at the end and using a variant of it that does not immediately free
the resources to show each commit object from the command line in
"git show".
Protect the fix with a few new tests.
Reported-by: Daniel Li <dan@danielyli.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some "simple" centralized workflows, users expect remote tracking
branch names to match local branch names. "git push" pushes to the
remote version/instance of the branch, and "git pull" pulls any changes
to the remote branch (changes made by the same user in another place, or
by other users).
This expectation is supported by the push.default default option "simple"
which refuses a default push for a mismatching tracking branch name, and
by the new branch.autosetupmerge option, "simple", which only sets up
remote tracking for same-name remote branches.
When a new branch has been created by the user and has not yet been
pushed (and push.default is not set to "current"), the user is prompted
with a "The current branch %s has no upstream branch" error, and
instructions on how to push and add tracking.
This error is helpful in that following the advice once per branch
"resolves" the issue for that branch forever, but inconvenient in that
for the "simple" centralized workflow, this is always the right thing to
do, so it would be better to just do it.
Support this workflow with a new config setting, push.autoSetupRemote,
which will cause a default push, when there is no remote tracking branch
configured, to push to the same-name on the remote and --set-upstream.
Also add a hint offering this new option when the "The current branch %s
has no upstream branch" error is encountered, and add corresponding tests.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "push.default=current" configured, a simple "git push" will push to
the same-name branch on the current branch's branch.<name>.pushRemote, or
remote.pushDefault, or origin. If none of these are defined, the push will
fail with error "fatal: No configured push destination".
The same "default to origin if no config" behavior applies with
"push.default=matching".
Other commands use "origin" as a default when there are multiple options,
but default to the single remote when there is only one - for example,
"git checkout <something>". This "assume the single remote if there is
only one" behavior is more friendly/useful than a defaulting behavior
that only uses the name "origin" no matter what.
Update "git push" to also default to the single remote (and finally fall
back to "origin" as default if there are several), for
"push.default=current" and for other current and future remote-defaulting
push behaviors.
This change also modifies the behavior of ls-remote in a consistent way,
so defaulting not only supplies 'origin', but any single configured remote
also.
Document the change in behavior, correct incorrect assumptions in related
tests, and add test cases reflecting this new single-remote-defaulting
behavior.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the default push.default option, "simple", beginners are
protected from accidentally pushing to the "wrong" branch in
centralized workflows: if the remote tracking branch they would push
to does not have the same name as the local branch, and they try to do
a "default push", they get an error and explanation with options.
There is a particular centralized workflow where this often happens:
a user branches to a new local topic branch from an existing
remote branch, eg with "checkout -b feature1 origin/master". With
the default branch.autosetupmerge configuration (value "true"), git
will automatically add origin/master as the upstream tracking branch.
When the user pushes with a default "git push", with the intention of
pushing their (new) topic branch to the remote, they get an error, and
(amongst other things) a suggestion to run "git push origin HEAD".
If they follow this suggestion the push succeeds, but on subsequent
default pushes they continue to get an error - so eventually they
figure out to add "-u" to change the tracking branch, or they spelunk
the push.default config doc as proposed and set it to "current", or
some GUI tooling does one or the other of these things for them.
When one of their coworkers later works on the same topic branch,
they don't get any of that "weirdness". They just "git checkout
feature1" and everything works exactly as they expect, with the shared
remote branch set up as remote tracking branch, and push and pull
working out of the box.
The "stable state" for this way of working is that local branches have
the same-name remote tracking branch (origin/feature1 in this
example), and multiple people can work on that remote feature branch
at the same time, trusting "git pull" to merge or rebase as required
for them to be able to push their interim changes to that same feature
branch on that same remote.
(merging from the upstream "master" branch, and merging back to it,
are separate more involved processes in this flow).
There is a problem in this flow/way of working, however, which is that
the first user, when they first branched from origin/master, ended up
with the "wrong" remote tracking branch (different from the stable
state). For a while, before they pushed (and maybe longer, if they
don't use -u/--set-upstream), their "git pull" wasn't getting other
users' changes to the feature branch - it was getting any changes from
the remote "master" branch instead (a completely different class of
changes!)
An experienced git user might say "well yeah, that's what it means to
have the remote tracking branch set to origin/master!" - but the
original user above didn't *ask* to have the remote master branch
added as remote tracking branch - that just happened automatically
when they branched their feature branch. They didn't necessarily even
notice or understand the meaning of the "set up to track 'origin/master'"
message when they created the branch - especially if they are using a
GUI.
Looking at how to fix this, you might think "OK, so disable auto setup
of remote tracking - set branch.autosetupmerge to false" - but that
will inconvenience the *second* user in this story - the one who just
wanted to start working on the topic branch. The first and second
users swap roles at different points in time of course - they should
both have a sane configuration that does the right thing in both
situations.
Make this "branches have the same name locally as on the remote"
workflow less painful / more obvious by introducing a new
branch.autosetupmerge option called "simple", to match the same-name
"push.default" option that makes similar assumptions.
This new option automatically sets up tracking in a *subset* of the
current default situations: when the original ref is a remote tracking
branch *and* has the same branch name on the remote (as the new local
branch name).
Update the error displayed when the 'push.default=simple' configuration
rejects a mismatching-upstream-name default push, to offer this new
branch.autosetupmerge option that will prevent this class of error.
With this new configuration, in the example situation above, the first
user does *not* get origin/master set up as the tracking branch for
the new local branch. If they "git pull" in their new local-only
branch, they get an error explaining there is no upstream branch -
which makes sense and is helpful. If they "git push", they get an
error explaining how to push *and* suggesting they specify
--set-upstream - which is exactly the right thing to do for them.
This new option is likely not appropriate for users intentionally
implementing a "triangular workflow" with a shared upstream tracking
branch, that they "git pull" in and a "private" feature branch that
they push/force-push to just for remote safe-keeping until they are
ready to push up to the shared branch explicitly/separately. Such
users are likely to prefer keeping the current default
merge.autosetupmerge=true behavior, and change their push.default to
"current".
Also extend the existing branch tests with three new cases testing
this option - the obvious matching-name and non-matching-name cases,
and also a non-matching-ref-type case. The matching-name case needs to
temporarily create an independent repo to fetch from, as the general
strategy of using the local repo as the remote in these tests
precludes locally branching with the same name as in the "remote".
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
* jc/diff-tree-stdin-fix:
2.36 gitk/diff-tree --stdin regression fix
"git submodule update" without pathspec should silently skip an
uninitialized submodule, but it started to become noisy by mistake.
* gc/submodule-update-part2:
submodule--helper: fix initialization of warn_if_uninitialized
The description of 'safe.directory' mentions that it's respected in
the system and global configs, and ignored in the repository config
and on the command line, but it doesn't mention whether it's respected
or ignored when specified via environment variables (nor does the
commit message adding 'safe.directory' [1]).
Clarify that 'safe.directory' is ignored when specified in the
environment, and add tests to make sure that it remains so.
[1] 8959555cee (setup_git_directory(): add an owner check for the
top-level directory, 2022-03-02)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the documentation 'safe.directory' "is only respected
when specified in a system or global config, not when it is specified
in a repository config or via the command line option -c
safe.directory=<path>".
Add tests to check that 'safe.directory' in the repository config or
on the command line is indeed ignored.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8959555cee (setup_git_directory(): add an owner check for the
top-level directory, 2022-03-02) when git finds itself in a repository
owned by someone else, it aborts with a "fatal: unsafe repository
(<repo path>)" error message and an advice about how to set the
'safe.directory' config variable to mark that repository as safe.
't0033-safe-directory.sh' contains tests that check that this feature
and handling said config work as intended. To ensure that git dies
for the right reason, several of those tests check that its standard
error contains the name of that config variable, but:
- it only appears in the advice part, not in the actual error
message.
- it is interpreted as a regexp by 'grep', so, because of the dot,
it matches the name of the test script and the path of the trash
directory as well. Consequently, these tests could be fooled by
any error message that would happen to include the path of the
test repository.
Tighten these checks to look for "unsafe repository" instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not obvious that the 'git rev-parse' builtin would use the sparse
index, but it is possible to parse paths out of the index using the
":<path>" syntax. The 'git rev-parse' output is only the OID of the
object found at that location, but otherwise behaves similarly to 'git
show :<path>'. This includes the failure conditions on directories and
the error messages depending on whether a path is in the worktree or
not.
The only code change required is to change the
command_requires_full_index setting in builtin/rev-parse.c, and we can
re-use many existing 'git show' tests for the rev-parse case.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git show :<path>' where '<path>' is a directory, then
there is a subtle difference between a full checkout and a sparse
checkout. The error message from diagnose_invalid_index_path() reports
whether the path is on disk or not. The full checkout will have the
directory on disk, but the path will not be in the index. The sparse
checkout could have the directory not exist, specifically when that
directory is outside of the sparse-checkout cone.
In the case of a sparse index, we have yet another state: the path can
be a sparse directory in the index. In this case, the error message from
diagnose_invalid_index_path() would erroneously say "path '<path>' is in
the index, but not at stage 0", which is false.
Add special casing around sparse directory entries so we get to the
correct error message. This requires two checks in order to get parity
with the normal sparse-checkout case.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_oid_with_context_1() method is used when parsing revision
arguments. One particular case is to take a ":<path>" string and search
the index for the given path.
In the case of a sparse index, this might find a sparse directory entry,
in which case the contained object is a tree. In the case of a full
index, this search within the index would fail.
In order to maintain identical return state as in a full index, inspect
the discovered cache entry to see if it is a sparse directory and reject
it. This requires being careful around the only_to_die option to be sure
we die only at the correct time.
This changes the behavior of 'git show :<sparse-dir>', but does not
bring it entirely into alignment with a full index case. It specifically
hits the wrong error message within diagnose_invalid_index_path(). That
error message will be corrected in a future change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git show' command can take an input to request the state of an
object in the index. This can lead to parsing the index in order to load
a specific file entry. Without the change presented here, a sparse index
would expand to a full one, taking much longer than usual to access a
simple file.
There is one behavioral change that happens here, though: we now can
find a sparse directory entry within the index! Commands that previously
failed because we could not find an entry in the worktree or index now
succeed because we _do_ find an entry in the index.
There might be more work to do to make other situations succeed when
looking for an indexed tree, perhaps by looking at or updating the
cache-tree extension as needed. These situations include having a full
index or asking for a directory that is within the sparse-checkout cone
(and hence is not a sparse directory entry in the index).
For now, we demonstrate how the sparse index integration is extremely
simple for files outside of the cone as well as directories within the
cone. A later change will resolve this behavior around sparse
directories.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .warn_if_uninitialized member was introduced by 48308681
(git submodule update: have a dedicated helper for cloning,
2016-02-29) to submodule_update_clone struct and initialized to
false. When c9911c93 (submodule--helper: teach update_data more
options, 2022-03-15) moved it to update_data struct, it started
to initialize it to true but this change was not explained in
its log message.
The member is set to true only when pathspec was given, and is
used when a submodule that matched the pathspec is found
uninitialized to give diagnostic message. "submodule update"
without pathspec is supposed to iterate over all submodules
(i.e. without pathspec limitation) and update only the
initialized submodules, and finding uninitialized submodules
during the iteration is a totally expected and normal thing that
should not be warned.
[jc: added tests]
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
The diff_free() call is to be used after we completely finished with
a diffopt structure. After "git diff A B" finishes producing
output, calling it before process exit is fine. But there are
commands that prepares diff_options struct once, compares two sets
of paths, releases resources that were used to do the comparison,
then reuses the same diff_option struct to go on to compare the next
two sets of paths, like "git log -p".
After "git log -p" finishes showing a single commit, calling it
before it goes on to the next commit is NOT fine. There is a
mechanism, the .no_free member in diff_options struct, to help "git
log" to avoid calling diff_free() after showing each commit and
instead call it just one. When the mechanism was introduced in
e900d494 (diff: add an API for deferred freeing, 2021-02-11),
however, we forgot to do the same to "diff-tree --stdin", which *is*
a moral equivalent to "git log".
During 2.36 release cycle, we started clearing the pathspec in
diff_free(), so programs like gitk that runs
git diff-tree --stdin -- <pathspec>
downstream of a pipe, processing one commit after another, started
showing irrelevant comparison outside the given <pathspec> from the
second commit. The same commit, by forgetting to teach the .no_free
mechanism, broke "diff-tree --stdin -I<regexp>" and nobody noticed
it for over a year, presumably because it is so seldom used an
option.
But <pathspec> is a different story. The breakage was very
prominently visible and was reported immediately after 2.36 was
released.
Fix this breakage by mimicking how "git log" utilizes the .no_free
member so that "diff-tree --stdin" behaves more similarly to "log".
Protect the fix with a few new tests.
Reported-by: Matthias Aßhauer <mha1993@live.de>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning directly from a local repository, we load a list of refs
based on scanning the $GIT_DIR/refs/ directory of the "server"
repository. If files exist in that directory that do not parse as
hexadecimal hashes, then the ref array used by write_remote_refs()
ends up with some entries with null OIDs. This causes us to hit a BUG()
statement in ref_transaction_create():
BUG: create called without valid new_oid
This BUG() call used to be a die() until 033abf97f (Replace all
die("BUG: ...") calls by BUG() ones, 2018-05-02). Before that, the die()
was added by f04c5b552 (ref_transaction_create(): check that new_sha1 is
valid, 2015-02-17).
The original report for this bug [1] mentioned that this problem did not
exist in Git 2.27.0. The failure bisects unsurprisingly to 968f12fda
(refs: turn on GIT_REF_PARANOIA by default, 2021-09-24). When
GIT_REF_PARANOIA is enabled, this case always fails as far back as I am
able to successfully compile and test the Git codebase.
[1] https://github.com/git-for-windows/git/issues/3781
There are two approaches to consider here. One would be to remove this
BUG() statement in favor of returning with an error. There are only two
callers to ref_transaction_create(), so this would have a limited
impact.
The other approach would be to add special casing in 'git clone' to
avoid this faulty input to the method.
While I originally started with changing 'git clone', I decided that
modifying ref_transaction_create() was a more complete solution. This
prevents failing with a BUG() statement when we already have a good way
to report an error (including a reason for that error) within the
method. Both callers properly check the return value and die() with the
error message, so this is an appropriate direction.
The added test helps check against a regression, but does check that our
intended error message is handled correctly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--since=<time>" option of "git log" limits the commits displayed by
the command by stopping the traversal once it sees a commit whose
timestamp is older than the given time and not digging further into its
parents.
This is OK in a history where a commit always has a newer timestamp than
any of its parents'. Once you see a commit older than the given <time>,
all ancestor commits of it are even older than the time anyway. It
poses, however, a problem when there is a commit with a wrong timestamp
that makes it appear older than its parents. Stopping traversal at the
"incorrectly old" commit will hide its ancestors that are newer than
that wrong commit and are newer than the cut-off time given with the
--since option. --max-age and --after being the synonyms to --since,
they share the same issue.
Add a new "--since-as-filter" option that is a variant of
"--since=<time>". Instead of stopping the traversal to hide an old
enough commit and its all ancestors, exclude commits with an old
timestamp from the output but still keep digging the history.
Without other traversal stopping options, this will force the command in
"git log" family to dig down the history to the root. It may be an
acceptable cost for a small project with short history and many commits
with screwy timestamps.
It is quite unlikely for us to add traversal stopper other than since,
so have this as a --since-as-filter option, rather than a separate
--as-filter, that would be probably more confusing.
Signed-off-by: Miklos Vajna <vmiklos@vmiklos.hu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an explicit --no-cone to several sparse-checkout invocations in
preparation for changing the default to cone mode.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--current" is given to "git show-branch" running in the
"--reflog" mode, the code tries to reference a "reflog" message
that does not even exist. This is because the --current is not
prepared to work in that mode.
The reason "--current" exists is to support this request:
I list branches on the command line. These are the branchesI
care about and I use as anchoring points. I may or may not be on
one of these main branches. Please make sure I can view the
commits on the current branch with respect to what is in these
other branches.
And to serve that request, the code checks if the current branch is
among the ones listed on the command line, and adds it only if it is
not to the end of one array, which essentially lists the objects.
The reflog mode additionally uses another array to list reflog
messages, which the "--current" code does not add to. This leaves
one uninitialized slot at the end of the array of reflog messages,
and causes the program to show garbage or segfault.
Catch the unsupported (and meaningless) combination and exit with a
usage error.
There are other combinations of options that are incompatible but
have not been tested. Add test to cover them while adding coverage
for this new combination.
Reported-by: Gregory David <gregory.david@p1sec.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--keep-base rebases onto the merge base of the given upstream and the
current HEAD regardless of whether a branch is given. This is contrary
to the documentation and to the option's intended purpose. Instead,
rebase onto the merge base of the given upstream and the given branch.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses temporary files to pass the contents of blobs to external diff
programs and textconv filters. It calls mks_tempfile_ts() to create
them, which puts them all in the same directory. This requires adding
a random name prefix.
Use mks_tempfile_dt() instead, which allows the files to have arbitrary
names, each in their own separate temporary directory. This way they
can have the same basename as the original blob, which looks nicer in
graphical diff programs.
The test in t4020 to check the prettiness of the temporary paths was
neutered by 5476bdf0e8 (diff tests: don't ignore "git diff" exit code in
"read" loop, 2022-03-07), which removed its grep check without replacing
it with an equivalent test_cmp check. Add one that only checks the
basename of the temporary file and nothing else.
And make the test more robust while at it, by using test_when_finished
to get rid of the added file even if the test fails.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call diff_free() on the "pruning" member of "struct rev_info". Doing
so makes several tests pass under SANITIZE=leak.
This was also the last missing piece that allows us to remove the
UNLEAK() in "cmd_diff" and "cmd_diff_index", which allows us to use
those commands as a canary for general leaks in the revisions API. See
[1] for further rationale, and 886e1084d7 (builtin/: add UNLEAKs,
2017-10-01) for the commit that added the UNLEAK() there.
1. https://lore.kernel.org/git/220218.861r00ib86.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing reflog_walk_info_release() to "reflog-walk.c" and use it
in release_revisions().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clear the "boundary_commits" object_array in release_revisions(). This
makes a few more tests pass under SANITIZE=leak, including
"t/t4126-apply-empty.sh" which started failed as an UNLEAK() in
cmd_format_patch() was removed in a preceding commit.
This also re-marks the various tests relying on "git format-patch" as
passing under "SANITIZE=leak", in the preceding "revisions API users:
use release_revisions() in builtin/log.c" commit those were marked as
failing as we removed the UNLEAK(rev) from cmd_format_patch() in
"builtin/log.c".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the the release_revisions() function so that it frees the
"grep_filter" in the "struct rev_info".This allows us to mark a test
as passing under "TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the the release_revisions() function so that it frees the
"filter" in the "struct rev_info". This in combination with a
preceding change to free "cmdline" means that we can mark another set
of tests as passing under "TEST_PASSES_SANITIZE_LEAK=true".
The "filter" member was added recently in ffaa137f64 (revision: put
object filter into struct rev_info, 2022-03-09), and this fixes leaks
intruded in the subsequent leak 7940941de1 (pack-objects: use
rev.filter when possible, 2022-03-09) and 105c6f14ad (bundle: parse
filter capability, 2022-03-09).
The "builtin/pack-objects.c" leak in 7940941de1 was effectively with
us already, but the variable was referred to by a "static" file-scoped
variable. The "bundle.c " leak in 105c6f14ad was newly introduced
with the new "filter" feature for bundles.
The "t5600-clone-fail-cleanup.sh" change here to add
"TEST_PASSES_SANITIZE_LEAK=true" is one of the cases where
run-command.c in not carrying the abort() exit code upwards would have
had that test passing before, but now it *actually* passes[1]. We
should fix the lack of 1=1 mapping of SANITIZE=leak testing to actual
leaks some other time, but it's an existing edge case, let's just mark
the really-passing test as passing for now.
1. https://lore.kernel.org/git/220303.86fsnz5o9w.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the the release_revisions() function so that it frees the
"cmdline" in the "struct rev_info". This in combination with a
preceding change to free "commits" and "mailmap" means that we can
whitelist another test under "TEST_PASSES_SANITIZE_LEAK=true".
There was a proposal in [1] to do away with xstrdup()-ing this
add_rev_cmdline(), perhaps that would be worthwhile, but for now let's
just free() it.
We could also make that a "char *" in "struct rev_cmdline_entry"
itself, but since we own it let's expose it as a constant to outside
callers. I proposed that in [2] but have since changed my mind. See
14d30cdfc0 (ref-filter: fix memory leak in `free_array_item()`,
2019-07-10), c514c62a4f (checkout: fix leak of non-existent branch
names, 2020-08-14) and other log history hits for "free((char *)" for
prior art.
This includes the tests we had false-positive passes on before my
6798b08e84 (perl Git.pm: don't ignore signalled failure in
_cmd_close(), 2022-02-01), now they pass for real.
Since there are 66 tests matching t/t[0-9]*git-svn*.sh it's easier to
list those that don't pass than to touch most of those 66. So let's
introduce a "TEST_FAILS_SANITIZE_LEAK=true", which if set in the tests
won't cause lib-git-svn.sh to set "TEST_PASSES_SANITIZE_LEAK=true.
This change also marks all the tests that we removed
"TEST_FAILS_SANITIZE_LEAK=true" from in an earlier commit due to
removing the UNLEAK() from cmd_format_patch(), we can now assert that
its API use doesn't leak any "struct rev_info" memory.
This change also made commit "t5503-tagfollow.sh" pass on current
master, but that would regress when combined with
ps/fetch-atomic-fixup's de004e848a (t5503: simplify setup of test
which exercises failure of backfill, 2022-03-03) (through no fault of
that topic, that change started using "git clone" in the test, which
has an outstanding leak). Let's leave that test out for now to avoid
in-flight semantic conflicts.
1. https://lore.kernel.org/git/YUj%2FgFRh6pwrZalY@carlos-mbp.lan/
2. https://lore.kernel.org/git/87o88obkb1.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the the release_revisions() function so that it frees the
"mailmap" in the "struct rev_info".
The log family of functions now calls the clear_mailmap() function
added in fa8afd18e5a (revisions API: provide and use a
release_revisions(), 2021-09-19), allowing us to whitelist some tests
with "TEST_PASSES_SANITIZE_LEAK=true".
Unfortunately having a pointer to a mailmap in "struct rev_info"
instead of an embedded member that we "own" get a bit messy, as can be
seen in the change to builtin/commit.c.
When we free() this data we won't be able to tell apart a pointer to a
"mailmap" on the heap from one on the stack. As seen in
ea57bc0d41 (log: add --use-mailmap option, 2013-01-05) the "log"
family allocates it on the heap, but in the find_author_by_nickname()
code added in ea16794e43 (commit: search author pattern against
mailmap, 2013-08-23) we allocated it on the stack instead.
Ideally we'd simply change that member to a "struct string_list
mailmap" and never free() the "mailmap" itself, but that would be a
much larger change to the revisions API.
We have code that needs to hand an existing "mailmap" to a "struct
rev_info", while we could change all of that, let's not go there
now.
The complexity isn't in the ownership of the "mailmap" per-se, but
that various things assume a "rev_info.mailmap == NULL" means "doesn't
want mailmap", if we changed that to an init'd "struct string_list
we'd need to carefully refactor things to change those assumptions.
Let's instead always free() it, and simply declare that if you add
such a "mailmap" it must be allocated on the heap. Any modern libc
will correctly panic if we free() a stack variable, so this should be
safe going forward.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for having the "log" family of functions make wider use
of release_revisions() let's have them call it just before
exiting. This changes the "log", "whatchanged", "show",
"format-patch", etc. commands, all of which live in this file.
The release_revisions() API still only frees the "pending" member, but
will learn to release more members of "struct rev_info" in subsequent
commits.
In the case of "format-patch" revert the addition of UNLEAK() in
dee839a263 (format-patch: mark rev_info with UNLEAK, 2021-12-16),
which will cause several tests that previously passed under
"TEST_PASSES_SANITIZE_LEAK=true" to start failing.
In subsequent commits we'll now be able to use those tests to check
whether that part of the API is really leaking memory, and will fix
all of those memory leaks. Removing the UNLEAK() allows us to make
incremental progress in that direction. See [1] for further details
about this approach.
Note that the release_revisions() will not be sufficient to deal with
the code in cmd_show() added in 5d7eeee2ac (git-show: grok blobs,
trees and tags, too, 2006-12-14) which clobbers the "pending" array in
the case of "OBJ_COMMIT". That will need to be dealt with by some
future follow-up work.
1. https://lore.kernel.org/git/220218.861r00ib86.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a release_revisions() to various users of "struct rev_info" which
requires a minor refactoring to a "goto cleanup" pattern to use that
function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a release_revisions() to various users of "struct rev_list" in
those straightforward cases where we only need to add the
release_revisions() call to the end of a block, and don't need to
e.g. refactor anything to use a "goto cleanup" pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been with us since f9500261e0 (fast-rebase:
write conflict state to working tree, index, and HEAD, 2021-05-20)
changed this code to move these strbuf_release() into an if/else
block.
We'll also add to "reflog_msg" in the "else" arm of the "if" block
being modified here, and we'll append to "branch_msg" in both
cases. But after f9500261e0 only the "if" block would free these two
"struct strbuf".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 2a0cafd464,
as it expects a working "a ref deletion must produce a single
transaction, not one for loose and another for packed" topic,
which we do not have.
With the addition of the safe.directory in 8959555ce
(setup_git_directory(): add an owner check for the top-level directory,
2022-03-02) released in v2.35.2, we are receiving feedback from a
variety of users about the feature.
Some users have a very large list of shared repositories and find it
cumbersome to add this config for every one of them.
In a more difficult case, certain workflows involve running Git commands
within containers. The container boundary prevents any global or system
config from communicating `safe.directory` values from the host into the
container. Further, the container almost always runs as a different user
than the owner of the directory in the host.
To simplify the reactions necessary for these users, extend the
definition of the safe.directory config value to include a possible '*'
value. This value implies that all directories are safe, providing a
single setting to opt-out of this protection.
Note that an empty assignment of safe.directory clears all previous
values, and this is already the case with the "if (!value || !*value)"
condition.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that nothing is ever checking to make sure the safe directories
in the configs actually have the key safe.directory, so some unrelated
config that has a value with a certain directory would also make it a
safe directory.
Signed-off-by: Matheus Valadares <me@m28.io>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is difficult to change the ownership on a directory in our test
suite, so insert a new GIT_TEST_ASSUME_DIFFERENT_OWNER environment
variable to trick Git into thinking we are in a differently-owned
directory. This allows us to test that the config is parsed correctly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_path_is_file() instead of 'test -f' for better debugging
information.
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the address sanitizer checks for a superset of the issues detected
by setting MALLOC_CHECK_ (which tries to detect things like double
frees and off-by-one errors) there is no need to set the latter when
compiling with -fsanitize=address.
This fixes a regression introduced by 131b94a10a ("test-lib.sh: Use
GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34", 2022-03-04)
which causes all the tests to fail with the message
ASan runtime does not come first in initial library list;
you should either link runtime to your application or
manually preload it with LD_PRELOAD.
when git is compiled with SANITIZE=address on systems with glibc >=
2.34. I have tested SANITIZE=leak and SANITIZE=undefined and they do
not suffer from this regression so the fix in this patch should be
sufficient.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if git grep works around the PCRE2 big fixed by their e0c6029
(Fix inifinite loop when a single byte newline is searched in JIT.,
2020-05-29), which affects version 10.35 and earlier.
Searching for leading whitespace also triggers the endless loop.
Set a one-second alarm to abort in case we do get hit by the bug, to
avoid having to wait forever for the test result.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "FUNNYNAMES" test prerequisite passes on Cygwin, as the Cygwin
file system interface has a workaround for the underlying operating
system's lack of support for tabs, newlines or quotes. However, it does
not add support for backslash, which is treated as a directory
separator, meaning one of the tests added by 48803821b1 ("completion:
handle unusual characters for sparse-checkout", 2022-02-07) will fail on
Cygwin.
To avoid this failure while still getting maximal test coverage, split
that test into two: test handling of paths that include tabs on anything
that has the FUNNYNAMES prerequisite, but skip testing handling of paths
that include backslashes unless both FUNNYNAMES is set and the system is
not Cygwin.
It might be nice to have more granularity than "FUNNYNAMES" and its
sibling "FUNNIERNAMES" provide, so that tests could be run based on
specific individual characters supported by the file system being
tested, but that seems like it would make the prerequisite checks in
this area much more verbose for very little gain.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning about converting line endings is extremely confusing. Its
two sentences each use the word "will" without specifying a timeframe,
which makes it sound like both sentences are referring to the same
timeframe. On top of that, it uses the term "original line endings"
without saying whether "original" means LF or CRLF.
Rephrase the warning to be clear about when the line endings will be
changed and what they will be changed to.
On a platform whose native line endings are not CRLF (e.g. Linux), the
"git add" step in the following sequence triggers the warning in
question:
$ git config core.autocrlf true
$ echo 'Hello world!' >hello.txt
$ git add hello.txt
warning: LF will be replaced by CRLF in hello.txt
The file will have its original line endings in your working directory
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that affect the repo in stateful ways are easier to write if we
can run setup steps outside of the measured portion of perf iteration.
This change adds a "--setup 'setup-script'" parameter to test_perf. To
make invocations easier to understand, I also moved the prerequisites to
a new --prereq parameter.
The setup facility will be used in the upcoming perf tests for batch
mode, but it already helps in some existing tests, like t5302 and t7820.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add basic performance tests for git commands that can add data to the
object database. We cover:
* git add
* git stash
* git update-index (via git stash)
* git unpack-objects
* git commit --all
We cover all currently available fsync methods as well.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases to exercise batch mode for:
* 'git add'
* 'git stash'
* 'git update-index'
* 'git unpack-objects'
These tests ensure that the added data winds up in the object database.
In this change we introduce a new test helper lib-unique-files.sh. The
goal of this library is to create a tree of files that have different
oids from any other files that may have been created in the current test
repo. This helps us avoid missing validation of an object being added
due to it already being in the repo.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several tests use awk to parse OIDs from the output of 'git ls-files
--stage' and 'git ls-tree'. Introduce helpers to centralize these uses
of awk.
Update t5317-pack-objects-filter-objects.sh to use the new ls-files
helper so that it has some usages to review. Other updates are left for
the future.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce has a file type "utf8" which represents a text file with
explicit BOM. utf8-encoded files *without* BOM are stored as
regular file type "text". The "utf8" file type behaves like text
in all but one important way: it is stored, internally, without
the leading 3 BOM bytes.
git-p4 has historically imported utf8-with-BOM files (files stored,
in Perforce, as type "utf8") the same way as regular text files -
losing the BOM in the process.
Under most circumstances this issue has little functional impact,
as most systems consider the BOM to be optional and redundant, but
this *is* a correctness failure, and can have lead to practical
issues for example when BOMs are explicitly included in test files,
for example in a file encoding test suite.
Fix the handling of utf8-with-BOM files when importing changes from
p4 to git, and introduce a test that checks it is working correctly.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --branch argument of the "sync" subcommand, git-p4 enables
you to import a perforce branch/path to an arbitrary git ref, using
a full ref path, or to refs/remotes/p4/* or refs/heads/p4/*,
depending on --import-local, using a short ref name.
However, when you later want to explicitly sync such a given ref to
pick up subsequent p4 changes, it only works if the ref was placed
in the p4 path *and* has only one path component (no "/").
This limitation results from a bad assumption in the
existing-branch sync logic, and also means you cannot individually
sync branches detected by --detect-branches, as these also get a
"/" in their names.
Fix "git p4 sync --branch", when called with an existing ref, so
that it works correctly regardless of whether the ref is in the p4
path or not, and (in the case of refs in the p4 path) regardless of
whether it has a "/" in its short name or not.
Also add tests to validate that these branch-specific syncs work
as expected.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test 'cherry-pick after renaming branch', stop checking for
the presence of a file (opos) because we are going to "grep" in it in
the same test and the lack of it will be noticed as a failure anyway.
In the test 'revert after renaming branch', instead of allowing any
random contents as long as a known phrase is not there in it, we can
expect the exact outcome---after the successful revert of "added", the
contents of file "spoo" should become identical to what was in file
"oops" in the "initial" commit. This test also contains 'test -f' that
verifies presence of a file, but we have a helper function to do the same
thing. Replace it with appropriate helper function 'test_path_is_file'
for better readability and better error messages.
In both tests, we will not notice when "git rev-parse" starts segfaulting
without emitting any output. The 'test' command will end up being just
"test =", which yields success. Use the 'test_cmp_rev' helper to make
sure we will notice such a breakage.
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dc6b1d92ca (wt-status: use settings from git_diff_ui_config, 2018-05-04)
disabled diffopt.break_opt for diffstats shown by git status and in
commit templates. For git status there isn't even a way to enable it.
Make the commit summary (shown after the commit) consistent by disabling
it there as well.
Reported-by: Laurent Lyaudet <laurent.lyaudet@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list --porcelain" did not c-quote pathnames and lock
reasons with unsafe bytes correctly, which is worked around by
introducing NUL terminated output format with "-z".
* pw/worktree-list-with-z:
worktree: add -z option for list subcommand
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
Give hint when branch tracking cannot be established because fetch
refspecs from multiple remote repositories overlap.
* tk/ambiguous-fetch-refspec:
tracking branches: add advice to ambiguous refspec error
"git fetch --refetch" learned to fetch everything without telling
the other side what we already have, which is useful when you
cannot trust what you have in the local object store.
* rc/fetch-refetch:
docs: mention --refetch fetch option
fetch: after refetch, encourage auto gc repacking
t5615-partial-clone: add test for fetch --refetch
fetch: add --refetch option
builtin/fetch-pack: add --refetch option
fetch-pack: add refetch
fetch-negotiator: add specific noop initializer
A handful of obvious clean-ups around a topic that is already in
'master'.
* gc/branch-recurse-submodules-fix:
branch.c: simplify advice-and-die sequence
branch: rework comments for future developers
branch: remove negative exit code
branch --set-upstream-to: be consistent when advising
branch: give submodule updating advice before exit
branch: support more tracking modes when recursing
Code clean-up.
* ds/partial-bundle-more:
pack-objects: lazily set up "struct rev_info", don't leak
bundle: output hash information in 'verify'
bundle: move capabilities to end of 'verify'
pack-objects: parse --filter directly into revs.filter
pack-objects: move revs out of get_object_list()
list-objects-filter: remove CL_ARG__FILTER
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
* tl/ls-tree-oid-only:
ls-tree: split up "fast path" callbacks
ls-tree: detect and error on --name-only --name-status
ls-tree: support --object-only option for "git-ls-tree"
ls-tree: introduce "--format" option
cocci: allow padding with `strbuf_addf()`
ls-tree: introduce struct "show_tree_data"
ls-tree: slightly refactor `show_tree()`
ls-tree: fix "--name-only" and "--long" combined use bug
ls-tree: simplify nesting if/else logic in "show_tree()"
ls-tree: rename "retval" to "recurse" in "show_tree()"
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
ls-tree: use "enum object_type", not {blob,tree,commit}_type
ls-tree: add missing braces to "else" arms
ls-tree: remove commented-out code
ls-tree tests: add tests for --name-status
"git reflog" command now uses parse-options API to parse its
command line options.
* ab/reflog-parse-options:
reflog: fix 'show' subcommand's argv
reflog [show]: display sensible -h output
reflog: convert to parse_options() API
reflog exists: use parse_options() API
git reflog [expire|delete]: make -h output consistent with SYNOPSIS
reflog: move "usage" variables and use macros
reflog tests: add missing "git reflog exists" tests
reflog: refactor cmd_reflog() to "if" branches
reflog.c: indent argument lists
* ds/partial-bundle-more:
pack-objects: lazily set up "struct rev_info", don't leak
bundle: output hash information in 'verify'
bundle: move capabilities to end of 'verify'
pack-objects: parse --filter directly into revs.filter
pack-objects: move revs out of get_object_list()
list-objects-filter: remove CL_ARG__FILTER
Untracked cache was originally designed to only work with
"--untracked-files=normal", and is bypassed when
"--untracked-files=all" is requested, but this causes performance
issues for UI tooling that wants to see "all" on a frequent basis.
On the other hand, the conditions that altogether prevented
applicability to the "all" mode no longer seem to apply, after
several major refactors in recent years; this possibility was
discussed in
81153d02-8e7a-be59-e709-e90cd5906f3a@jeffhostetler.com and
CABPp-BFiwzzUgiTj_zu+vF5x20L0=1cf25cHwk7KZQj2YkVzXw@mail.gmail.com,
and somewhat confirmed experimentally by several users using a
version of this patch to use untracked cache with -uall for about a
year.
When 'git status' runs without using the untracked cache, on a large
repo, on windows, with fsmonitor, it can run very slowly. This can
make GUIs that need to use "-uall" (and therefore currently bypass
untracked cache) unusable when fsmonitor is enabled, on such large
repos.
To partially address this, align the supported directory flags for the
stored untracked cache data with the git config. If a user specifies
an '--untracked-files=' commandline parameter that does not align with
their 'status.showuntrackedfiles' config value, then the untracked
cache will be ignored - as it is for other unsupported situations like
when a pathspec is specified.
If the previously stored flags no longer match the current
configuration, but the currently-applicable flags do match the current
configuration, then discard the previously stored untracked cache
data.
For most users there will be no change in behavior. Users who need
'--untracked-files=all' to perform well will now have the option of
setting "status.showuntrackedfiles" to "all" for better / more
consistent performance.
Users who need '--untracked-files=all' to perform well for their
tooling AND prefer to avoid the verbosity of "all" when running
git status explicitly without options... are out of luck for now (no
change).
Users who have the "status.showuntrackedfiles" config set to "all"
and yet frequently explicitly call
'git status --untracked-files=normal' (and use the untracked cache)
are the only ones who will be disadvantaged by this change. Their
"--untracked-files=normal" calls will, after this change, no longer
use the untracked cache.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Untracked cache was originally designed to only work with
'--untracked-files=normal', and it gets ignored when
'--untracked-files=all' is specified instead.
Add explicit tests for this known as-designed behavior.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error "not tracking: ambiguous information for ref" is raised
when we are evaluating what tracking information to set on a branch,
and find that the ref to be added as tracking branch is mapped
under multiple remotes' fetch refspecs.
This can easily happen when a user copy-pastes a remote definition
in their git config, and forgets to change the tracking path.
Add advice in this situation, explicitly highlighting which remotes
are involved and suggesting how to correct the situation. Also
update a test to explicitly expect that advice.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behavior of "git -v" to be synonymous with "--version" /
"version", and "git -h" to be synonymous with "--help", but not "help".
These shorthands both display the "unknown option" message. Following
this change, "-v" displays the version, and "-h" displays the help text
of the "git" command.
It should be noted that the "-v" shorthand could be misinterpreted by
the user to mean "verbose" instead of "version", since some sub-commands
make use of it in this context. The top-level "git" command does not
have a "verbose" flag, so it's safe to introduce this shorthand
unambiguously.
Signed-off-by: Garrit Franke <garrit@slashdev.space>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a -z option to be used in conjunction with --porcelain that gives
NUL-terminated output. As 'worktree list --porcelain' does not quote
worktree paths this enables it to handle worktree paths that contain
newlines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update tests around the use of hook scripts.
* ab/hook-tests-updates:
http tests: use "test_hook" for "smart" and "dumb" http tests
proc-receive hook tests: use "test_hook" instead of "write_script"
tests: extend "test_hook" for "rm" and "chmod -x", convert "$HOOK"
tests: use "test_hook" for misc "mkdir -p" and "chmod" cases
tests: change "mkdir -p && write_script" to use "test_hook"
tests: change "cat && chmod +x" to use "test_hook"
gc + p4 tests: use "test_hook", remove sub-shells
fetch+push tests: use "test_hook" and "test_when_finished" pattern
bugreport tests: tighten up "git bugreport -s hooks" test
tests: assume the hooks are disabled by default
http tests: don't rely on "hook/post-update.sample"
hook tests: turn exit code assertions into a loop
test-lib-functions: add and use a "test_hook" wrapper
"git stash" does not allow subcommands it internally runs as its
implementation detail, except for "git reset", to emit messages;
now "git reset" part has also been squelched.
* vd/stash-silence-reset:
reset: show --no-refresh in the short-help
reset: remove 'reset.refresh' config option
reset: remove 'reset.quiet' config option
reset: do not make '--quiet' disable index refresh
stash: make internal resets quiet and refresh index
reset: suppress '--no-refresh' advice if logging is silenced
reset: replace '--quiet' with '--no-refresh' in performance advice
reset: introduce --[no-]refresh option to --mixed
reset: revise index refresh advice
"git branch --recurse-submodules" does not propagate "--track=inherit"
or "--no-track" to submodules, which causes submodule branches to use
the wrong tracking mode [1]. To fix this, pass the correct options to
the "submodule--helper create-branch" child process and test for it.
While we are refactoring the same code, replace "--track" with the
synonymous, but more consistent-looking "--track=direct" option
(introduced at the same time as "--track=inherit", d3115660b4 (branch:
add flags and config to inherit tracking, 2021-12-20)).
[1] This bug is partially a timing issue: "branch --recurse-submodules"
was introduced around the same time as "--track=inherit", and even
though I rebased "branch --recurse-submodules" on top of that, I had
neglected to support the new tracking mode. Omitting "--no-track"
was just a plain old mistake, though.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new test case file for the different available merge tools.
Right now it only tests the 'mergetool.vimdiff.layout' option. Other
merge tools might be interested in adding their own tests here too.
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some global trace2 statistics for the number of fsyncs performed
during the lifetime of a Git process.
These stats are printed as part of trace2_cmd_exit_fl, which is
presumably where we might want to print any other cross-cutting
statistics.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase $base $non_branch_commit", when $base is an ancestor or
the $non_branch_commit, modified the current branch, which has been
corrected.
* jc/rebase-detach-fix:
rebase: set REF_HEAD_DETACH in checkout_up_to_date()
rebase: use test_commit helper in setup
When "shallow" information is updated, we forgot to update the
in-core equivalent, which has been corrected.
* jt/reset-grafts-when-resetting-shallow:
shallow: reset commit grafts when shallow is reset
Correct a bug in unpack-trees introduced earlier.
* vd/cache-bottom-fix:
Revert "unpack-trees: improve performance of next_cache_entry"
unpack-trees: increment cache_bottom for sparse directories
t1092: add sparse directory before cone in test repo
Update the stat info of the moved index entry in 'rename_index_entry_at()'
if the entry is up-to-date with the index. Internally, 'git mv' uses
'rename_index_entry_at()' to move the source index entry to the destination.
However, it directly copies the stat info of the original cache entry, which
will not reflect the 'ctime' of the file renaming operation that happened as
part of the move. If a file is otherwise up-to-date with the index, that
difference in 'ctime' will make the entry appear out-of-date until the next
index-refreshing operation (e.g., 'git status').
Some commands, such as 'git reset', use the cached stat information to
determine whether a file is up-to-date; if this information is incorrect,
the command will fail when it should pass. In order to ensure a moved entry
is evaluated as 'up-to-date' when appropriate, refresh the destination index
entry's stat info in 'git mv' if and only if the file is up-to-date.
Note that the test added in 't7001-mv.sh' requires a "sleep 1" to ensure the
'ctime' of the file creation will be definitively older than the 'ctime' of
the renamed file in 'git mv'.
Reported-by: Maximilian Reichel <reichemn@icloud.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After invoking `fetch --refetch`, the object db will likely contain many
duplicate objects. If auto-maintenance is enabled, invoke it with
appropriate settings to encourage repacking/consolidation.
* gc.autoPackLimit: unless this is set to 0 (disabled), override the
value to 1 to force pack consolidation.
* maintenance.incremental-repack.auto: unless this is set to 0, override
the value to -1 to force incremental repacking.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for doing a refetch to apply a changed partial clone filter
under protocol v0 and v2.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git fetch --recurse-submodules" grabbed submodule commits
that would be needed to recursively check out newly fetched commits
in the superproject, it only paid attention to submodules that are
in the current checkout of the superproject. We now do so for all
submodules that have been run "git submodule init" on.
* gc/recursive-fetch-with-unused-submodules:
submodule: fix latent check_has_commit() bug
fetch: fetch unpopulated, changed submodules
submodule: move logic into fetch_task_create()
submodule: extract get_fetch_task()
submodule: store new submodule commits oid_array in a struct
submodule: inline submodule_commits() into caller
submodule: make static functions read submodules from commits
t5526: create superproject commits with test helper
t5526: stop asserting on stderr literally
t5526: introduce test helper to assert on fetches
Create 2x2 test matrix with the untracked-cache and fsmonitor--daemon
features and a series of edits and verify that status output is
identical.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Repeat all of the fsmonitor perf tests using `git fsmonitor--daemon` and
the "Simple IPC" interface.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change p7519 to use `test_seq` and `xargs` rather than a `for` loop
to touch thousands of files. This takes minutes off of test runs
on Windows because of process creation overhead.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `test-tool.exe chmtime` to ignore errors when setting the mtime
on a directory on Windows.
NEEDSWORK: The Windows version of `utime()` (aka `mingw_utime()`) does
not properly handle directories because it uses `_wopen()`. It should
be converted to using `CreateFileW()` and backup semantics at a minimum.
Since I'm already in the middle of a large patch series, I did not want
to destabilize other callers of `utime()` right now. The problem has
only been observed in the t/perf/p7519 test when the test repo contains
an empty directory on disk.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not copy any of the various fsmonitor--daemon files from the .git
directory of the (GIT_PREF_REPO or GIT_PERF_LARGE_REPO) source repo
into the test's trash directory.
When perf tests start, they copy the contents of the source repo into
the test's trash directory. If fsmonitor is running in the source repo,
there may be control files, such as the IPC socket and/or fsmonitor
cookie files. These should not be copied into the test repo.
Unix domain sockets cannot be copied in the manner used by the test
setup, so if present, the test setup fails.
Cookie files are harmless, but we should avoid them.
The builtin fsmonitor keeps all such control files/sockets in
.git/fsmonitor--daemon*, so it is simple to exclude them.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create an IPC client to send query and flush commands to the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the "feature: fsmonitor--daemon" message to the output of
`git version --build-options`.
The builtin FSMonitor is only available on certain platforms and
even then only when certain Makefile flags are enabled, so print
a message in the verbose version output when it is available.
This can be used by test scripts for prereq testing. Granted, tests
could just try `git fsmonitor--daemon status` and look for a 128 exit
code or grep for a "not supported" message on stderr, but these
methods are rather obscure.
The main advantage is that the feature message will automatically
appear in bug reports and other support requests.
This concept was also used during the development of Scalar for
similar reasons.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move fsmonitor config settings to a new and opaque
`struct fsmonitor_settings` structure. Add a lazily-loaded pointer
to this into `struct repo_settings`
Create an `enum fsmonitor_mode` type in `struct fsmonitor_settings` to
represent the state of fsmonitor. This lets us represent which, if
any, fsmonitor provider (hook or IPC) is enabled.
Create `fsm_settings__get_*()` getters to lazily look up fsmonitor-
related config settings.
Get rid of the `core_fsmonitor` global variable. Move the code to
lookup the existing `core.fsmonitor` config value into the fsmonitor
settings.
Create a hook pathname variable in `struct fsmonitor-settings` and
only set it when in hook mode.
Extend the definition of `core.fsmonitor` to be either a boolean
or a hook pathname. When true, the builtin FSMonitor is used.
When false or unset, no FSMonitor (neither builtin nor hook) is
used.
The existing `core_fsmonitor` global variable was used to store the
pathname to the fsmonitor hook *and* it was used as a boolean to see
if fsmonitor was enabled. This dual usage and global visibility leads
to confusion when we add the IPC-based provider. So lets hide the
details in fsmonitor-settings.c and let it decide which provider to
use in the case of multiple settings. This avoids cluttering up
repo-settings.c with these private details.
A future commit in builtin-fsmonitor series will add the ability to
disqualify worktrees for various reasons, such as being mounted from a
remote volume, where fsmonitor should not be started. Having the
config settings hidden in fsmonitor-settings.c allows such worktree
restrictions to override the config values used.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of test_subcommand_inexact() was originally
introduced in e4d0c11c0 (repack: respect kept objects with '--write-midx
-b', 2021-12-20) with the intention to allow finding a subcommand based
on an initial set of arguments. The inexactness was intended as a way to
allow flexible options beyond that initial set, as opposed to
test_subcommand() which requires that the full list of options is
provided in its entirety.
The implementation began by copying test_subcommand() and replaced the
repeated argument 'printf' statement to append ".*" instead of "," to
each argument. This caused it to be more flexible than initially
intended.
The previous change deleted the only use of test_subcommand_inexact, so
instead of editing the helper, delete it.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--write-midx -b packs non-kept objects' test in t7700-repack.sh
uses test_subcommand_inexact to check that 'git repack' properly adds
the '--honor-pack-keep' flag to the 'git pack-objects' subcommand.
However, the test_subcommand_inexact helper is more flexible than
initially designed, and this instance is the only one that makes use of
it: there are additional arguments between 'git pack-objects' and the
'--honor-pack-keep' flag. In order to make test_subcommand_inexact more
strict, we need to fix this instance.
This test checks that 'git repack --write-midx -a -b -d' will create a
new pack-file that does not contain the objects within the kept pack.
This behavior is possible because of the multi-pack-index bitmap that
will bitmap objects against multiple packs. Without --write-midx, the
objects in the kept pack would be duplicated so the resulting pack is
closed under reachability and bitmaps can be created against it. This is
discussed in more detail in e4d0c11c0 (repack: respect kept objects with
'--write-midx -b', 2021-12-20) which also introduced this instance of
test_subcommand_inexact.
To better verify the intended post-conditions while also removing this
instance of test_subcommand_inexact, rewrite the test to check the list
of packed objects in the kept pack and the list of the objects in the
newly-repacked pack-file _other_ than the kept pack. These lists should
be disjoint.
Be sure to include a non-kept pack-file and loose objects to be extra
careful that this is properly behaving with kept packs and not just
avoiding repacking all pack-files.
Co-authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "--immediate" option so that it emits valid TAP on
failure. Before this it would omit the required plan at the end,
e.g. under SANITIZE=leak we'd show a "No plan found in TAP output"
error from "prove":
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Parse errors: No plan found in TAP output
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.18 cusr 0.06 csys = 0.27 CPU)
Result: FAIL
Now we'll emit output that doesn't result in TAP parsing failures:
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.19 cusr 0.05 csys = 0.26 CPU)
Result: FAIL
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.34:
Git 2.34.2
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.33:
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.32:
Git 2.32.1
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.31:
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.30:
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
When determining the length of the longest ancestor of a given path with
respect to to e.g. `GIT_CEILING_DIRECTORIES`, we special-case the root
directory by returning 0 (i.e. we pretend that the path `/` does not end
in a slash by virtually stripping it).
That is the correct behavior because when normalizing paths, the root
directory is special: all other directory paths have their trailing
slash stripped, but not the root directory's path (because it would
become the empty string, which is not a legal path).
However, this special-casing of the root directory in
`longest_ancestor_length()` completely forgets about Windows-style root
directories, e.g. `C:\`. These _also_ get normalized with a trailing
slash (because `C:` would actually refer to the current directory on
that drive, not necessarily to its root directory).
In fc56c7b34b (mingw: accomodate t0060-path-utils for MSYS2,
2016-01-27), we almost got it right. We noticed that
`longest_ancestor_length()` expects a slash _after_ the matched prefix,
and if the prefix already ends in a slash, the normalized path won't
ever match and -1 is returned.
But then that commit went astray: The correct fix is not to adjust the
_tests_ to expect an incorrect -1 when that function is fed a prefix
that ends in a slash, but instead to treat such a prefix as if the
trailing slash had been removed.
Likewise, that function needs to handle the case where it is fed a path
that ends in a slash (not only a prefix that ends in a slash): if it
matches the prefix (plus trailing slash), we still need to verify that
the path does not end there, otherwise the prefix is not actually an
ancestor of the path but identical to it (and we need to return -1 in
that case).
With these two adjustments, we no longer need to play games in t0060
where we only add `$rootoff` if the passed prefix is different from the
MSYS2 pseudo root, instead we also add it for the MSYS2 pseudo root
itself. We do have to be careful to skip that logic entirely for Windows
paths, though, because they do are not subject to that MSYS2 pseudo root
treatment.
This patch fixes the scenario where a user has set
`GIT_CEILING_DIRECTORIES=C:\`, which would be ignored otherwise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Change the "git reflog show -h" output to show the usage summary
relevant to it, rather than displaying the same output that "git log
-h" would show.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the work started in 33d7bdd645 (builtin/reflog.c: use
parse-options api for expire, delete subcommands, 2022-01-06) and
convert the cmd_reflog() function itself to use the parse_options()
API.
Let's also add a test which would fail if we forgot
PARSE_OPT_NO_INTERNAL_HELP here, as well as making sure that we'll
still pass through "--" by supplying PARSE_OPT_KEEP_DASHDASH. For that
test we need to change "test_commit()" to accept files starting with
"--".
The "git reflog -h" usage will now show the usage for all of the
sub-commands, rather than a terse summary which wasn't
correct (e.g. "git reflog exists" is not a valid command). See my
8757b35d44 (commit-graph: define common usage with a macro,
2021-08-23) for prior art.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.refresh' option, requiring that users explicitly specify
'--no-refresh' if they want to skip refreshing the index.
The 'reset.refresh' option was introduced in 101cee42dd (reset: introduce
--[no-]refresh option to --mixed, 2022-03-11) as a replacement for the
refresh-skipping behavior originally controlled by 'reset.quiet'.
Although 'reset.refresh=false' functionally served the same purpose as
'reset.quiet=true', it exposed [1] the fact that the existence of a global
"skip refresh" option could potentially cause problems for users. Allowing a
global config option to avoid refreshing the index forces scripts using 'git
reset --mixed' to defensively use '--refresh' if index refresh is expected;
if that option is missing, behavior of a script could vary from user-to-user
without explanation.
Furthermore, globally disabling index refresh in 'reset --mixed' was
initially devised as a passive performance improvement; since the
introduction of the option, other changes have been made to Git (e.g., the
sparse index) with a greater potential performance impact without
sacrificing index correctness. Therefore, we can more aggressively err on
the side of correctness and limit the cases of skipping index refresh to
only when a user specifies the '--no-refresh' option.
[1] https://lore.kernel.org/git/xmqqy2179o3c.fsf@gitster.g/
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update '--quiet' to no longer implicitly skip refreshing the index in a
mixed reset. Users now have the ability to explicitly disable refreshing the
index with the '--no-refresh' option, so they no longer need to use
'--quiet' to do so. Moreover, we explicitly remove the refresh-skipping
behavior from '--quiet' because it is completely unrelated to the stated
purpose of the option: "Be quiet, only report errors."
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize away strbuf_expand() call with a hardcoded formatting logic
specific for the default format in the --batch and --batch-check
options of "git cat-file".
* jc/cat-file-batch-default-format-optim:
cat-file: skip expanding default format
"git repack" learned a new configuration to disable triggering of
age-old "update-server-info" command, which is rarely useful these
days.
* ps/repack-with-server-info:
repack: add config to skip updating server info
repack: refactor to avoid double-negation of update-server-info
"git name-rev" learned to use the generation numbers when setting
the lower bound of searching commits used to explain the revision,
when available, instead of committer time.
* jk/name-rev-w-genno:
name-rev: use generation numbers if available
Rewrite of "git submodule update" in C (early part).
* gc/submodule-update-part1:
submodule--helper update-clone: check for --filter and --init
submodule update: add tests for --filter
submodule--helper: remove ensure-core-worktree
submodule--helper update-clone: learn --init
submodule--helper: allow setting superprefix for init_submodule()
submodule--helper: refactor get_submodule_displaypath()
submodule--helper run-update-procedure: learn --remote
submodule--helper: don't use bitfield indirection for parse_options()
submodule--helper: get remote names from any repository
submodule--helper run-update-procedure: remove --suboid
submodule--helper: reorganize code for sh to C conversion
submodule--helper: remove update-module-mode
submodule tests: test for init and update failure output
The previous change moved the 'filter' capability to the end of the 'git
bundle verify' output. Now, add the 'object-format' capability to the
output, when it exists.
This change makes 'git bundle verify' output the hash used in all cases,
even if the capability is not in the bundle. This means that v2 bundles
will always output that they use "sha1". This might look noisy to some
users, but it does simplify the implementation and the test strategy for
this feature.
Since 'verify' ends early when a prerequisite commit is missing, we need
to insert this hash message carefully into our expected test output
throughout t6020.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'filter' capability was added in 105c6f14a (bundle: parse filter
capability, 2022-03-09), but was added in a strange place in the 'git
bundle verify' output.
The tests for this show output like the following:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle records a complete history.
This looks very odd if we have a thin bundle that contains boundary
commits instead of a complete history:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle requires these 2 refs:
<COMMIT3>
<COMMIT4>
This separation between tip refs and boundary refs is unfortunate. Move
the filter capability output to the end of the output. Update the
documentation to match.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --name-only and --name-status options are synonyms, but let's
detect and error if both are provided.
In addition let's add explicit --format tests for the combination of
these various options.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'--object-only' is an alias for '--format=%(objectname)'. It cannot
be used together other format-altering options like '--name-only',
'--long' or '--format', they are mutually exclusive.
The "--name-only" option outputs <filepath> only. Likewise, <objectName>
is another high frequency used field, so implement '--object-only' option
will bring intuitive and clear semantics for this scenario. Using
'--format=%(objectname)' we can achieve a similar effect, but the former
is with a lower learning cost(without knowing the format requirement
of '--format' option).
Even so, if a user is prefer to use "--format=%(objectname)", this is entirely
welcome because they are not only equivalent in function, but also have almost
identical performance. The reason is this commit also add the specific of
"--format=%(objectname)" to the current fast-pathes (builtin formats) to
avoid running unnecessary parsing mechanisms.
The following performance benchmarks are based on torvalds/linux.git:
When hit the fast-path:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --object-only HEAD
Time (mean ± σ): 83.6 ms ± 2.0 ms [User: 59.4 ms, System: 24.1 ms]
Range (min … max): 80.4 ms … 87.2 ms 35 runs
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(objectname)' HEAD
Time (mean ± σ): 84.1 ms ± 1.8 ms [User: 61.7 ms, System: 22.3 ms]
Range (min … max): 80.9 ms … 87.5 ms 35 runs
But for a customized format, it will be slower:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='oid: %(objectname)' HEAD
Time (mean ± σ): 96.5 ms ± 2.5 ms [User: 72.9 ms, System: 23.5 ms]
Range (min … max): 93.1 ms … 104.1 ms 31 runs
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --format option to ls-tree. It has an existing default output,
and then --long and --name-only options to emit the default output
along with the objectsize and, or to only emit object paths.
Rather than add --type-only, --object-only etc. we can just support a
--format using a strbuf_expand() similar to "for-each-ref
--format". We might still add such options in the future for
convenience.
The --format implementation is slower than the existing code, but this
change does not cause any performance regressions. We'll leave the
existing show_tree() unchanged, and only run show_tree_fmt() in if
a --format different than the hardcoded built-in ones corresponding to
the existing modes is provided.
I.e. something like the "--long" output would be much slower with
this, mainly due to how we need to allocate various things to do with
quote.c instead of spewing the output directly to stdout.
The new option of '--format' comes from Ævar Arnfjörð Bjarmasonn's
idea and suggestion, this commit makes modifications in terms of the
original discussion on community [1].
In [1] there was a "GIT_TEST_LS_TREE_FORMAT_BACKEND" variable to
ensure that we had test coverage for passing tests that would
otherwise use show_tree() through show_tree_fmt(), and thus that the
formatting mechanism could handle all the same cases as the
non-formatting options.
Somewhere in subsequent re-rolls of that we seem to have drifted away
from what the goal of these tests should be. We're trying to ensure
correctness of show_tree_fmt(). We can't tell if we "hit [the]
fast-path" here, and instead of having an explicit test for that, we
can just add it to something our "test_ls_tree_format" tests for.
Here is the statistics about performance tests:
1. Default format (hitten the builtin formats):
"git ls-tree <tree-ish>" vs "--format='%(mode) %(type) %(object)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r HEAD
Time (mean ± σ): 105.2 ms ± 3.3 ms [User: 84.3 ms, System: 20.8 ms]
Range (min … max): 99.2 ms … 113.2 ms 28 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD
Time (mean ± σ): 106.4 ms ± 2.7 ms [User: 86.1 ms, System: 20.2 ms]
Range (min … max): 100.2 ms … 110.5 ms 29 runs
2. Default format includes object size (hitten the builtin formats):
"git ls-tree -l <tree-ish>" vs "--format='%(mode) %(type) %(object) %(size:padded)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r -l HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r -l HEAD
Time (mean ± σ): 335.1 ms ± 6.5 ms [User: 304.6 ms, System: 30.4 ms]
Range (min … max): 327.5 ms … 348.4 ms 10 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD
Time (mean ± σ): 337.2 ms ± 8.2 ms [User: 309.2 ms, System: 27.9 ms]
Range (min … max): 328.8 ms … 349.4 ms 10 runs
Links:
[1] https://public-inbox.org/git/RFC-patch-6.7-eac299f06ff-20211217T131635Z-avarab@gmail.com/
[2] https://lore.kernel.org/git/cb717d08be87e3239117c6c667cb32caabaad33d.1646390152.git.dyroneteng@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we execute "git ls-tree" with combined "--name-only" and "--long"
, only the pathname will be printed, the size is omitted (the original
discoverer was Peff in [1]).
This commit fix this issue by using `OPT_CMDMODE()` instead to make both
of them mutually exclusive.
[1] https://public-inbox.org/git/YZK0MKCYAJmG+pSU@coredump.intra.peff.net/
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --name-status synonym for --name-only added in
c639a5548a (ls-tree: --name-only, 2005-12-01) had no tests, let's
make sure it works the same way as its sibling.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle file format gets extended to allow a partial bundle,
filtered by similar criteria you would give when making a
partial/lazy clone.
* ds/partial-bundles:
clone: fail gracefully when cloning filtered bundle
bundle: unbundle promisor packs
bundle: create filtered bundles
rev-list: move --filter parsing into revision.c
bundle: parse filter capability
list-objects: handle NULL function pointers
MyFirstObjectWalk: update recommended usage
list-objects: consolidate traverse_commit_list[_filtered]
pack-bitmap: drop filter in prepare_bitmap_walk()
pack-objects: use rev.filter when possible
revision: put object filter into struct rev_info
list-objects-filter-options: create copy helper
index-pack: document and test the --promisor option
The method to trigger malloc check used in our tests no longer work
with newer versions of glibc.
* ep/test-malloc-check-with-glibc-2.34:
test-lib: declare local variables as local
test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34
Test fixes.
* sm/no-git-in-upstream-of-pipe-in-tests:
t0030-t0050: avoid pipes with Git on LHS
t0001-t0028: avoid pipes with Git on LHS
t0003: avoid pipes with Git on LHS
"git rebase A B" where B is not a commit should behave as if the
HEAD got detached at B and then the detached HEAD got rebased on top
of A. A bug however overwrites the current branch to point at B,
when B is a descendant of A (i.e. the rebase ends up being a
fast-forward). See [1] for the original bug report.
The callstack from checkout_up_to_date() is the following:
cmd_rebase()
-> checkout_up_to_date()
-> reset_head()
-> update_refs()
-> update_ref()
When B is not a valid branch but an oid, rebase sets the head_name
of rebase_options to NULL. This value gets passed down this call
chain through the branch member of reset_head_opts also getting set
to NULL all the way to update_refs().
Then update_refs() checks ropts.branch to decide whether or not to switch
branches. If ropts.branch is NULL, it calls update_ref() to update HEAD.
At this point however, from rebase's point of view, we want a detached
HEAD. But, since checkout_up_to_date() does not set the RESET_HEAD_DETACH
flag, the update_ref() call will deference HEAD and update the branch its
pointing to. We want the HEAD detached at B instead.
Fix this bug by adding the RESET_HEAD_DETACH flag in
checkout_up_to_date if B is not a valid branch, so that once
reset_head() calls update_refs(), it calls update_ref() with
REF_NO_DEREF which updates HEAD directly intead of deferencing it
and updating the branch that HEAD points to.
Also add a test to ensure the correct behavior.
[1] https://lore.kernel.org/git/YiokTm3GxIZQQUow@newk/
Reported-by: Michael McClimon <michael@mcclimon.org>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for the next commit that will test rebase with oids instead
of branch names, update the rebase setup test to add a couple of tags we
can use. This uses the test_commit helper so we can replace some lines
that add a commit manually.
Setting logAllRefUpdates is not necessary because it's on by default for
repositories with a working tree.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "reflog exists" command added in afcb2e7a3b (git-reflog:
add exists command, 2015-07-21) to use parse_options() instead of its
own custom command-line parser. This continues work started in
33d7bdd645 (builtin/reflog.c: use parse-options api for expire,
delete subcommands, 2022-01-06).
As a result we'll understand the --end-of-options synonym for "--", so
let's test for that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a few "git reflog exists" tests scattered over the test
suite, but let's consolidate the testing of the main functionality
into a new test file. This makes it easier to run just these tests
during development.
To do that amend and extend an existing test added in
afcb2e7a3b (git-reflog: add exists command, 2015-07-21). Let's use
"test_must_fail" instead of "!" (in case it segfaults), and test for
basic usage, an unknown option etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reset_repository_shallow() is called, Git clears its cache of
shallow information, so that if shallow information is re-requested, Git
will read fresh data from disk instead of reusing its stale cached data.
However, the cache of commit grafts is not likewise cleared, even though
there are commit grafts created from shallow information.
This means that if on-disk shallow information were to be updated and
then a commit-graft-using codepath were run (for example, a revision
walk), Git would be using stale commit graft information. This can be
seen from the test in this patch, in which Git performs a revision walk
(to check for changed submodules) after a fetch with --update-shallow.
Therefore, clear the cache of commit grafts whenever
reset_repository_shallow() is called.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the http tests to use "test_hook" insteadd of
"write_script". In both cases we can get rid of sub-shelling. For
"t/t5550-http-fetch-dumb.sh" add a trivial helper which sets up the
hook and calls "update-server-info".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the t5411/*.sh tests to use the test_hook helper instead of
"write_script". Unfortunately these tests do the setup and test across
different test_expect_success blocks, so we have to use
--clobber (implying --setup) for these.
Let's change those that can use a quoted here-doc to do so while we're
at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the "test_hook" function to take options to disable and remove
hooks. Using the wrapper instead of getting the path and running
"chmod -x" or "rm" will make it easier to eventually emulate the same
behavior with config-based hooks.
Not all of these tests need that new mode, but since the rest are
either closely related or use the same "$HOOK" pattern let's convert
them too.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct tracking of the 'cache_bottom' for cases where sparse directories
are present in the index.
BACKGROUND
----------
The 'unpack_trees_options.cache_bottom' is a variable that tracks the
in-progress "bottom" of the cache as 'unpack_trees()' iterates through the
contents of the index. Most importantly, this value informs the sequential
return values of 'next_cache_entry()' which, in the "diff cache" usage of
'unpack_callback()', are either unpacked as-is or are passed into the diff
machinery.
The 'cache_bottom' is intended to track the position of the first entry in
the index that has not yet been diffed or unpacked. It is advanced in two
main ways: either it is incremented when an index entry is marked as "used"
(in 'mark_ce_used()'), indicating that it was unpacked or diffed, or when a
directory is unpacked, in which case it is increased by an amount equaling
the number of index entries inside that tree.
In 17a1bb570b (unpack-trees: preserve cache_bottom, 2021-07-14), it was
identified that sparse directories posed a problem to the above
'cache_bottom' advancement logic - because a sparse directory was both an
index entry that could be "used" and a directory that can be unpacked, the
'cache_bottom' would be incremented too many times. To solve this problem,
the 'mark_ce_used()' advancement of 'cache_bottom' was skipped for sparse
directories.
INCORRECT CACHE_BOTTOM TRACKING
-------------------------------
Skipping the 'cache_bottom' advancement for sparse directories in
'mark_ce_used()' breaks down in two cases:
1. When the 'unpack_trees()' operation is *not* a "cache diff" (because the
directory contents-based incrementing of 'cache_bottom' does not happen).
2. When a cache diff is performed with a pathspec (because
'unpack_index_entry()' will unpack a sparse directory not matched by the
pathspec without performing the directory contents-based increment).
The former luckily does not appear to affect 'git' behavior, likely because
'cache_bottom' is largely unused (non-"cache diff" 'unpack_trees()' uses
'find_index_entry()' - rather than 'next_cache_entry()' - to find the index
entries to unpack).
The latter, however, causes 'cache_bottom' to "lag behind" its intended
position by an amount equal to the number of sparse directories unpacked so
far with 'unpack_index_entry()'. If a repository is structured such that any
sparse directories are ordered lexicographically *after* any
pathspec-matching directories, though, this issue won't present any adverse
behavior.
This was the case with the 't1092-sparse-checkout-compatibility.sh' tests
before the addition of the 'before/' sparse directory (ordered *before* the
in-cone 'deep/' directory), therefore sidestepping the issue. Once the
'before/' directory was added, though, 'cache_bottom' began to lag behind
its intended position, causing 'next_cache_entry()' to return index entries
it had already processed and, ultimately, an incorrect diff.
CORRECTING CACHE_BOTTOM
-----------------------
The problems observed in 't1092' come from 'cache_bottom' lagging behind in
cases where the cache tree-based advancement doesn't occur. To solve this,
then, the fix in 17a1bb570b is "reversed"; rather than skipping
'cache_bottom' advancement in 'mark_ce_used()', we skip the directory
contents-based advancement for sparse directories. Now, every index entry
can be accounted for in 'cache_bottom':
* if you're working with a single index entry, 'cache_bottom' is incremented
in 'mark_ce_used()'
* if you're working with a directory that contains index entries (but is not
one itself), 'cache_bottom' is incremented by the number of entries in
that directory.
Finally, change the 'test_expect_failure' tests in 't1092' failing due to
this bug back to 'test_expect_success'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a sparse directory 'before/' containing files 'a' and 'b' to the test
repo used in 't/t1092-sparse-checkout-compatibility.sh'. This is meant to
ensure that no sparse index integrations rely on the in-cone path(s) being
lexicographically first in the repo.
Unfortunately, some existing tests do not handle this repo architecture
properly:
* 'add outside sparse cone'
* 'status/add: outside sparse cone'
* 'reset with pathspecs inside sparse definition'
All three of these are due to the incorrect handling of the
'unpack_trees_options.cache_bottom' when performing a cache diff via
'unpack_trees'. This will be corrected in a future patch; in the meantime,
mark the tests with 'test_expect_failure'.
Finally, update the 'ls-files' and 'root directory cannot be sparse' tests
to include the 'before/' directory in their expected index contents.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My a18d66cefb (diff.c: free "buf" in diff_words_flush(), 2022-03-04)
has what it retrospect is a rather obvious bug (I don't know what I
was thinking, if it all): We use the "emitted_symbols" allocation in
append_emitted_diff_symbol() N times, but starting with a18d66cefb
we'd free it after its first use!
The correct way to free this data would have been to add the free() to
the existing free_diff_words_data() function, so let's do that. The
"ecbdata->diff_words->opt->emitted_symbols" might be NULL, so let's
add a trivial free_emitted_diff_symbols() helper next to the function
that appends to it.
This fixes the "no effect on show from" leak tested for in the
preceding commit. Perhaps confusingly this change will skip that test
under SANITIZE=leak, but otherwise opt-in the
"t4015-diff-whitespace.sh" test.
The reason is that a18d66cefb "fixed" the leak in the preceding "no
effect on diff" test, but for the first call to diff_words_flush() the
"wol->buf" would be NULL, so we wouldn't double-free (and
SANITIZE=address would see nothing amiss). With this change we'll
still pass that test, showing that we've also fixed leaks on this
codepath.
We then have to skip the new "no effect on show" test because it
happens to trip over an unrelated memory leak (in revision.c). The
same goes for "move detection with submodules". Both of them pass with
SANITIZE=address though, which would error on the "no effect on show"
test before this change.
Reported-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a failing test which demonstrates a regression in
a18d66cefb ("diff.c: free "buf" in diff_words_flush()", 2022-03-04),
the regression is discussed in detail in the subsequent commit. With
it running `git show --word-diff --color-moved` with SANITIZE=address
would emit:
==31191==ERROR: AddressSanitizer: attempting double-free on 0x617000021100 in thread T0:
#0 0x49f0a2 in free (git+0x49f0a2)
#1 0x9b0e4d in diff_words_flush diff.c:2153:3
#2 0x9aed5d in fn_out_consume diff.c:2354:3
#3 0xe092ab in consume_one xdiff-interface.c:43:9
#4 0xe072eb in xdiff_outf xdiff-interface.c:76:10
#5 0xec7014 in xdl_emit_diffrec xdiff/xutils.c:53:6
[...]
0x617000021100 is located 0 bytes inside of 768-byte region [0x617000021100,0x617000021400)
freed by thread T0 here:
#0 0x49f0a2 in free (git+0x49f0a2)
[...(same stacktrace)...]
previously allocated by thread T0 here:
#0 0x49f603 in __interceptor_realloc (git+0x49f603)
#1 0xde4da4 in xrealloc wrapper.c:126:8
#2 0x995dc5 in append_emitted_diff_symbol diff.c:794:2
#3 0x96c44a in emit_diff_symbol diff.c:1527:3
[...]
This was not caught by the test suite because we test `diff
--word-diff --color-moved` only so far.
Therefore, add a test for `show`, too.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of "test_hook" in various cases that didn't fit neatly into
preceding commits. Here we need to indent blocks in addition to
changing the test code, or to make other small cosmetic changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change tests that used a "mkdir -p .git/hooks && write_script" pattern
to use the new "test_hook" helper instead. The new helper does not
create the .git/hooks directory, rather we assume that the default
template will do so for us.
An upcoming series[1] will extend "test_hook" to operate in a
"--template=" mode, but for now assuming that we have a .git/hooks
already is a safe assumption. If that assumption becomes false in the
future we'll only need to change 'test_hook", instead of all of these
callsites.
1. https://lore.kernel.org/git/cover-00.13-00000000000-20211212T201308Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor various test code to use the "test_hook" helper. This change:
- Fixes the long-standing issues with those tests using "#!/bin/sh"
instead of "#!$SHELL_PATH". Using "#!/bin/sh" here happened to work
because this code was so simple that it e.g. worked on Solaris
/bin/sh.
- Removes the "mkdir .git/hooks" invocation, as explained in a
preceding commit we'll rely on the default templates to create that
directory for us.
For the test in "t5402-post-merge-hook.sh" it's easier and more
correct to unroll the for-loop into a test_expect_success, so let's do
that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the repository setup code for tests that test hooks the use
of sub-shells when setting up the test repository and hooks, and use
the "test_hook" wrapper instead of "write_scripts".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "t5516-fetch-push.sh" test code to make use of the new
"test_hook" helper, and to use "test_when_finished" to have tests
clean up their own state, instead of relying on subsequent tests to
clean the trash directory.
Before this each test would have been responsible for cleaning up
after a preceding test (which may or may not have run, e.g. if --run
or "GIT_SKIP_TESTS" was used), now each test will instead clean up
after itself.
In order to use both "test_hook" and "test_when_finished" we need to
move them out of sub-shells, which requires some refactoring.
While we're at it split up the "push with negotiation" test, now the
middle of the test doesn't need to "rm event", and since it delimited
two halves that were testing two different things the end-state is
easier to read and reason about.
While changing these lines make the minor change from "-fr" to "-rf"
as the "rm" argument, some of them used it already, it's more common
in the test suite, and it leaves the end-state of the file with more
consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a test added in 788a776069 (bugreport: collect list of
populated hooks, 2020-05-07) to "test_cmp" for the expected output,
instead of selectively using "grep" to check for specific things we
either expect or don't expect in the output.
As noted in a preceding commit our .git/hooks directory already
contains *.sample hooks, so we have no need to clobber the
prepare-commit-msg.sample hook in particular.
Instead we should assert that those *.sample hooks are not included in
the output, and for good measure let's add a new "unknown-hook", to
check that we only look through our own known hooks. See
cfe853e66b (hook-list.h: add a generated list of hooks, like
config-list.h, 2021-09-26) for how we generate that data.
We're intentionally not piping the "actual" output through "sort" or
similar, we'd also like to check that our reported hooks are sorted.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop moving the .git/hooks directory out of the way, or creating it
during test setup. Instead assume that it will contain
harmless *.sample files.
That we can assume that is discussed in point #4 of
f0d4d398e2 (test-lib: split up and deprecate test_create_repo(),
2021-05-10), those parts of this could and should have been done in
that change.
Removing the "mkdir -p" here will then validate that our templates are
being used, since we'd subsequently fail to create a hook in that
directory if it didn't exist. Subsequent commits will have those hooks
created by a "test_hook" wrapper, which will then being doing that
same validation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in a87679339c (test: rename http fetch and push
test files, 2014-02-06) to stop relying on the "exec git
update-server-info" in "templates/hooks--post-update.sample", let's
instead inline the expected hook in the test itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a test added in 96e7225b31 (hook: add 'run' subcommand,
2021-12-22) to use a for-loop instead of a copy/pasting the same test
for the four exit codes we test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "test_hook" wrapper similar to the existing "test_config"
wrapper added in d960c47a88 (test-lib: add helper functions for
config, 2011-08-17).
This wrapper:
- Will clean up the hook with "test_when_finished", unless --setup is
provided.
- Will error if we clobber a hook, unless --clobber is provided.
- Takes a name like "update" instead of ".git/hooks/update".
- Accepts -C <dir>, like "test_config" and "test_commit".
By using a wrapper we'll be able to easily change all the hook-related
code that assumes that the template-created ".git/hooks" directory is
created by "init", "clone" etc. once another topic follows-up and
changes the test suite to stop creating trash directories using those
templates.
In addition this will make it easy to have the hooks configured using
the "configuration-based hooks" topic, once we get around to
integrating that. I.e. we'll be able to run the tests in a mode where
we sometimes create a .git/hooks/<name>, and other times create a
script in another location, and point the relevant configuration
snippet to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Count string_list items in size_t, not "unsigned int".
* ab/string-list-count-in-size-t:
string-list API: change "nr" and "alloc" to "size_t"
gettext API users: don't explicitly cast ngettext()'s "n"
Teach "test-chmtime" to work on a directory and use it to avoid
having to wait for a second in a few places in tests.
* tk/t7063-chmtime-dirs-too:
t7063: mtime-mangling instead of delays in untracked cache testing
t/helper/test-chmtime: update mingw to support chmtime on directories
Fixes to the way generation number v2 in the commit-graph files are
(not) handled.
* ds/commit-graph-gen-v2-fixes:
commit-graph: declare bankruptcy on GDAT chunks
commit-graph: fix generation number v2 overflow values
commit-graph: start parsing generation v2 (again)
commit-graph: fix ordering bug in generation numbers
t5318: extract helpers to lib-commit-graph.sh
test-read-graph: include extra post-parse info
"git stash drop" is reimplemented as an internal call to
reflog_delete() function, instead of invoking "git reflog delete"
via run_command() API.
* jc/stash-drop:
stash: call reflog_delete() in reflog.c
reflog: libify delete reflog function and helpers
stash: add tests to ensure reflog --rewrite --updatref behavior
"git remote rename A B", depending on the number of remote-tracking
refs involved, takes long time renaming them. The command has been
taught to show progress bar while making the user wait.
* tb/rename-remote-progress:
builtin/remote.c: show progress when renaming remote references
builtin/remote.c: parse options in 'rename'
"git read-tree" has been made to be aware of the sparse-index
feature.
* vd/sparse-read-tree:
read-tree: make three-way merge sparse-aware
read-tree: make two-way merge sparse-aware
read-tree: narrow scope of index expansion for '--prefix'
read-tree: integrate with sparse index
read-tree: expand sparse checkout test coverage
read-tree: explicitly disallow prefixes with a leading '/'
status: fix nested sparse directory diff in sparse index
sparse-index: prevent repo root from becoming sparse
The untracked cache newly computed weren't written back to the
on-disk index file when there is no other change to the index,
which has been corrected.
* tk/empty-untracked-cache:
untracked-cache: write index when populating empty untracked cache
t7519: populate untracked cache before test
t7519: avoid file to index mtime race for untracked cache
"git fetch --recurse-submodules" only considers populated
submodules (i.e. submodules that can be found by iterating the index),
which makes "git fetch" behave differently based on which commit is
checked out. As a result, even if the user has initialized all submodules
correctly, they may not fetch the necessary submodule commits, and
commands like "git checkout --recurse-submodules" might fail.
Teach "git fetch" to fetch cloned, changed submodules regardless of
whether they are populated. This is in addition to the current behavior
of fetching populated submodules (which is always attempted regardless
of what was fetched in the superproject, or even if nothing was fetched
in the superproject).
A submodule may be encountered multiple times (via the list of
populated submodules or via the list of changed submodules). When this
happens, "git fetch" only reads the 'populated copy' and ignores the
'changed copy'. Amend the verify_fetch_result() test helper so that we
can assert on which 'copy' is being read.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gc/submodule-update-part1:
submodule--helper update-clone: check for --filter and --init
submodule update: add tests for --filter
submodule--helper: remove ensure-core-worktree
submodule--helper update-clone: learn --init
submodule--helper: allow setting superprefix for init_submodule()
submodule--helper: refactor get_submodule_displaypath()
submodule--helper run-update-procedure: learn --remote
submodule--helper: don't use bitfield indirection for parse_options()
submodule--helper: get remote names from any repository
submodule--helper run-update-procedure: remove --suboid
submodule--helper: reorganize code for sh to C conversion
submodule--helper: remove update-module-mode
submodule tests: test for init and update failure output
In a blobless-cloned repo, `git log --follow -- <path>` (`<path>` have
an exact OID rename) shouldn't download blob of the file from where the
new file is renamed.
Add a test case to verify it.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When format is passed into --batch, --batch-check, --batch-command,
the format gets expanded. When nothing is passed in, the default format
is set and the expand_format() gets called.
We can save on these cycles by hardcoding how to print the
information when nothing is passed as the format, or when the default
format is passed. There is no need for the fully expanded format with
the default. Since batch_object_write() happens on every object provided
in batch mode, we get a nice performance improvement.
git rev-list --all > /tmp/all-obj.txt
git cat-file --batch-check </tmp/all-obj.txt
with HEAD^:
Time (mean ± σ): 57.6 ms ± 1.7 ms [User: 51.5 ms, System: 6.2 ms]
Range (min … max): 54.6 ms … 64.7 ms 50 runs
with HEAD:
Time (mean ± σ): 49.8 ms ± 1.7 ms [User: 42.6 ms, System: 7.3 ms]
Range (min … max): 46.9 ms … 55.9 ms 56 runs
If nothing is provided as a format argument, or if the default format is
passed, skip expanding of the format and print the object info with a
default format.
See https://lore.kernel.org/git/87eecf8ork.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the options '-q' and '--refresh' to the 'git reset' executed in
'reset_head()', and '--refresh' to the 'git reset -q' executed in
'do_push_stash(...)'.
'stash' is implemented such that git commands invoked as part of it (e.g.,
'clean', 'read-tree', 'reset', etc.) have their informational output
silenced. However, the 'reset' in 'reset_head()' is *not* called with '-q',
leading to the potential for a misleading printout from 'git stash apply
--index' if the stash included a removed file:
Unstaged changes after reset: D <deleted file>
Not only is this confusing in its own right (since, after the reset, 'git
stash' execution would stage the deletion in the index), it would be printed
even when the stash was applied with the '-q' option. As a result, the
messaging is removed entirely by calling 'git status' with '-q'.
Additionally, because the default behavior of 'git reset -q' is to skip
refreshing the index, but later operations in 'git stash' subcommands expect
a non-stale index, enable '--refresh' as well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new --[no-]refresh option that is intended to explicitly determine
whether a mixed reset should end in an index refresh.
Starting at 9ac8125d1a (reset: don't compute unstaged changes after reset
when --quiet, 2018-10-23), using the '--quiet' option results in skipping
the call to 'refresh_index(...)' at the end of a mixed reset with the goal
of improving performance. However, by coupling behavior that modifies the
index with the option that silences logs, there is no way for users to have
one without the other (i.e., silenced logs with a refreshed index) without
incurring the overhead of a separate call to 'git update-index --refresh'.
Furthermore, there is minimal user-facing documentation indicating that
--quiet skips the index refresh, potentially leading to unexpected issues
executing commands after 'git reset --quiet' that do not themselves refresh
the index (e.g., internals of 'git stash', 'git read-tree').
To mitigate these issues, '--[no-]refresh' and 'reset.refresh' are
introduced to provide a dedicated mechanism for refreshing the index. When
either is set, '--quiet' and 'reset.quiet' revert to controlling only
whether logs are silenced and do not affect index refresh.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git-repack(1) will update server info that is required by
the dumb HTTP transport. This can be skipped by passing the `-n` flag,
but what we're noticably missing is a config option to permanently
disable updating this information.
Add a new option "repack.updateServerInfo" which can be used to disable
the logic. Most hosting providers have turned off the dumb HTTP protocol
anyway, and on the client-side it woudln't typically be useful either.
Giving a persistent way to disable this feature thus makes quite some
sense to avoid wasting compute cycles and storage.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git-repack(1) runs `update_server_info()` to generate info
required for the dumb HTTP protocol. This can be disabled via the `-n`
flag, which then sets the `no_update_server_info` flag. Further down the
code this leads to some double-negation logic, which is about to become
more confusing as we're about to add a new config which allows the user
to permanently disable generation of the info.
Refactor the code to avoid the double-negation and add some tests which
verify that the flag continues to work as expected.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newer version of GPGSM changed its output in a backward
incompatible way to break our code that parses its output. It also
added more processes our tests need to kill when cleaning up.
Adjustments have been made to accommodate these changes.
* fs/gpgsm-update:
t/lib-gpg: kill all gpg components, not just gpg-agent
t/lib-gpg: reload gpg components after updating trustlist
gpg-interface/gpgsm: fix for v2.3
Makefile refactoring with a bit of suffixes rule stripping to
optimize the runtime overhead.
* ab/make-optim-noop:
Makefiles: add and use wildcard "mkdir -p" template
Makefile: add "$(QUIET)" boilerplate to shared.mak
Makefile: move $(comma), $(empty) and $(space) to shared.mak
Makefile: move ".SUFFIXES" rule to shared.mak
Makefile: define $(LIB_H) in terms of $(FIND_SOURCE_FILES)
Makefile: disable GNU make built-in wildcard rules
Makefiles: add "shared.mak", move ".DELETE_ON_ERROR" to it
scalar Makefile: use "The default target of..." pattern
"git fetch" can make two separate fetches, but ref updates coming
from them were in two separate ref transactions under "--atomic",
which has been corrected.
* ps/fetch-atomic:
fetch: make `--atomic` flag cover pruning of refs
fetch: make `--atomic` flag cover backfilling of tags
refs: add interface to iterate over queued transactional updates
fetch: report errors when backfilling tags fails
fetch: control lifecycle of FETCH_HEAD in a single place
fetch: backfill tags before setting upstream
fetch: increase test coverage of fetches
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
shellcheck -i SC2006 -f diff ${_f} | ifne git apply -p2
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit in a sequence of linear history has a non-monotonically
increasing commit timestamp, git name-rev might not properly name the
commit.
This occurs because name-rev uses a heuristic of the commit date to
avoid searching down tags which lead to commits that are older than the
named commit. This is intended to avoid work on larger repositories.
This heuristic impacts git name-rev, and by extension git describe
--contains which is built on top of name-rev.
Further more, if --all or --annotate-stdin is used, the heuristic is not
enabled because the full history has to be analyzed anyways. This
results in some confusion if a user sees that --annotate-stdin works but
a normal name-rev does not.
If the repository has a commit graph, we can use the generation numbers
instead of using the commit dates. This is essentially the same check
except that generation numbers make it exact, where the commit date
heuristic could be incorrect due to clock errors.
Since we're extending the notion of cutoff to more than one variable,
create a series of functions for setting and checking the cutoff. This
avoids duplication and moves access of the global cutoff and
generation_cutoff to as few functions as possible.
Add several test cases including a test that covers the new commitGraph
behavior, as well as tests for --all and --annotate-stdin with and
without commitGraphs.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my daf1d8285e (reflog expire: don't use
lookup_commit_reference_gently(), 2021-12-22), in changing from
lookup_commit_reference_gently() to lookup_commit() we stopped trying
to call deref_tag() and parse_object() on the provided OID, but we
also started returning non-NULL for the null_oid().
As a result we'd emit an error() via mark_reachable() later in this
function as we tried to invoke parse_commit() on it.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The xfuncname pattern finds func/class declarations
in diffs to display as a hunk header. The word_regex
pattern finds individual tokens in Kotlin code to generate
appropriate diffs.
This patch adds xfuncname regex and word_regex for Kotlin
language.
Signed-off-by: Jaydeep P Das <jaydeepjd.8914@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pipes ignore error codes of LHS command and thus we should not use
them with Git in tests. As an alternative, use a 'tmp' file to write
the Git output so we can test the exit code.
Signed-off-by: Shubham Mishra <shivam828787@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pipes ignore error codes of LHS command and thus we should not use
them with Git in tests. As an alternative, use a 'tmp' file to write
the Git output so we can test the exit code.
Signed-off-by: Shubham Mishra <shivam828787@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
