With the --branch argument of the "sync" subcommand, git-p4 enables
you to import a perforce branch/path to an arbitrary git ref, using
a full ref path, or to refs/remotes/p4/* or refs/heads/p4/*,
depending on --import-local, using a short ref name.
However, when you later want to explicitly sync such a given ref to
pick up subsequent p4 changes, it only works if the ref was placed
in the p4 path *and* has only one path component (no "/").
This limitation results from a bad assumption in the
existing-branch sync logic, and also means you cannot individually
sync branches detected by --detect-branches, as these also get a
"/" in their names.
Fix "git p4 sync --branch", when called with an existing ref, so
that it works correctly regardless of whether the ref is in the p4
path or not, and (in the case of refs in the p4 path) regardless of
whether it has a "/" in its short name or not.
Also add tests to validate that these branch-specific syncs work
as expected.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the repository setup code for tests that test hooks the use
of sub-shells when setting up the test repository and hooks, and use
the "test_hook" wrapper instead of "write_scripts".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commits, we adjusted the test suite to use the branch
name `main` for initial branches.
The `git p4`-related tests are a bit harder to adjust because `git p4`
uses the ref `refs/heads/p4/master` to track the remote branches, and
for now, we do not want to change that (this might be the subject of a
future patch series). We only need to adjust for the actual initial
branch name to be changed to `main`.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We `cat` files, but don't inspect or grab the contents in any way.
Unlike in an earlier commit, there is no reason to suspect that these
files could be missing, so `cat`-ing them is just wasted effort.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 'test_atexit' to run cleanup commands to stop 'p4d' at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Note that one of the test scripts, 't9801-git-p4-branch.sh', stops and
then re-starts 'p4d' twice in the middle of the script; take care that
the cleanup functions to stop 'p4d' are only registered once.
Note also that 'git p4' tests invoke different functions in the trap
on EXIT ('cleanup') and in the last test before 'test_done'
('kill_p4d'). Register both of these functions with 'test_atexit' for
now, and a a later patch in this series will then clean up the
redundancy.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `p4-pre-submit` hook is executed before git-p4 submits code.
If the hook exits with non-zero value, submit process not start.
Signed-off-by: Chen Bin <chenbin.sh@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
When importing from multiple perforce paths - we may attempt to
import a changelist that contains files from two (or more) of these
depot paths. Currently, this results in multiple git commits - one
containing the changes, and the other(s) as empty commit(s). This
behavior was introduced in commit 1f90a64891 ("git-p4: reduce number
of server queries for fetches", 2015-12-19).
Reproduction Steps:
1. Have a git repo cloned from a perforce repo using multiple
depot paths (e.g. //depot/foo and //depot/bar).
2. Submit a single change to the perforce repo that makes changes
in both //depot/foo and //depot/bar.
3. Run "git p4 sync" to sync the change from #2.
Change is synced as multiple commits, one for each depot path that
was affected.
Using a set, instead of a list inside p4ChangesForPaths() ensures
that each changelist is unique to the returned list, and therefore
only a single commit is generated for each changelist.
Reported-by: James Farwell <jfarwell@vmware.com>
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 would attempt to find the git directory using
its own specific code, which did not know about git
worktrees.
Rework it to use "git rev-parse --git-dir" instead.
Add test cases for worktree usage and specifying
git directory via --git-dir and $GIT_DIR.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting, git-p4 finds the current branch in
order to know if it is allowed to submit (configuration
"git-p4.allowSubmit").
On a detached head, detecting the branch would fail, and
git-p4 would report a cryptic error.
This change teaches git-p4 to recognise a detached head and
submit successfully.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
git-p4 can't submit from a detached head. This test case
demonstrates the problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
Test that git-p4 can handle a sync with a non-numeric revision
range (e.g. a date).
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper function test_i18ngrep pretends that it found the expected
results when it is running under GETTEXT_POISON. For this reason, it must
not be used negated like so
! test_i18ngrep foo bar
because the test case would fail under GETTEXT_POISON. The function offers
a special syntax to test that a pattern is *not* found:
test_i18ngrep ! foo bar
Convert incorrect uses to this syntax.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depot paths must start with //. Exit with a better explanation
when a bad depot path is supplied.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that the standard branches are created as expected.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test passes already. Make sure p4 diagnostic errors are displayed.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error messages that arise during the "p4 print" phase of
generating commits were silently ignored. Catch them,
abort the fast-import, and exit.
Without this fix, the sync/clone appears to work, but files that
are inaccessible by the p4d server will still be imported to git,
although without the proper contents. Instead the errant files
will contain a p4 error message, such as "Librarian checkout
//depot/path failed".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be useful in future tests. Move it to
the git-p4 test library. Let it accept an optional argument
to pick a certain marshaled object out of the input stream.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct used to get the return code was flawed, in that
errors in the &&-chain before the semicolon were not caught. Use
the standard test_expect_code instead.
Set PATH in a subshell instead of relying on the bashism of
setting it just for a single command.
And fix the grep line so it doesn't worry about grep segfaults,
and doesn't fail for i18n issues.
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original t9800 test code has a mix of assorted topics, some
of which are big enough to deserve their own homes.
Interdependencies between the topics make it confusing when
trying to study one in isolation. And it takes so long to run
that debugging an individual test is difficult.
Split out three big chunks of tests into their own files:
t9812-git-p4-wildcards.sh gets the 8 p4 wildcard tests
t9813-git-p4-preserve-users.sh gets the 4 --preserve-user tests
t9814-git-p4-rename.sh gets the 2 copy and rename tests
Test 9800 execution time drops from 29 sec to 9 sec. The
sequential time to run all tests is a slower due to the three
extra p4d startup/shutdown sequences, but the overall parallel
execution time is about the same, at 52 sec.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For convenience, leave one in place at the end of each
test so that it is not necessary to build a new one. This
makes it consistent with $cli.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Msysgit testing showed that the source file found by copy
detection is indeterminate when there are multiple sources
to choose from. This appears to be valid. Adjust the test
so that it passes if it finds any of the potential copy sources.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For temporary files that are created in the top-level TRASH_DIRECTORY,
trust that the tests do not chdir except in subshells, and avoid some
quoting.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option. They
are stored in %xx notation, and when checked out, p4 converts
them back to normal.
When adding files with wildcards in git, the submit path must
be careful to use the encoded names in some places, and it
must use "-f" to add them. All other p4 commands that operate
on the client directory expect encoded filenames as arguments.
Support for wildcards in the clone/sync path was added in
084f630 (git-p4: decode p4 wildcard characters, 2011-02-19),
but that change did not handle the submit path.
There was a problem with wildcards in the sync path too. Commit
084f630 (git-p4: decode p4 wildcard characters, 2011-02-19)
handled files with p4 wildcards that were added or modified in
p4. Do this for deleted files, and also in branch detection
checks, too.
Reported-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If P4EDITOR is defined, the tests will fail when "git p4" starts an
editor.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the $GITP4 variable that was used to specify the script in
contrib/fast-import/. The command is called "git p4" now, not
"git-p4".
Note that configuration variables will remain in a section called
"git-p4".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works in both bash and dash:
$ bash -c 'VAR=1 env' | grep VAR
VAR=1
$ dash -c 'VAR=1 env' | grep VAR
VAR=1
But environment variables assigned this way are not necessarily propagated
through a function in POSIX compliant shells:
$ bash -c 'f() { "$@"
}; VAR=1 f "env"' | grep VAR
VAR=1
$ dash -c 'f() { "$@"
}; VAR=1 f "env"' | grep VAR
Fix constructs like this, in particular, setting variables through
test_must_fail.
Based-on-patch-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how git-p4 currently works when specifying multiple
depot paths:
1. No branches or directories are named.
2. Conflicting files are silently ignored---the last change
wins.
2. Option --destination is required, else the last path is construed
to be a directory.
3. Revision specifiers must be the same on all paths for them to
take effect.
Test this behavior.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use consistent naming for all tests: "t98<num>-git-p4-<topic>.sh"
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
