Amend a test added in 9c46c054ae (rev-parse: tests git rev-parse
--verify master@{n}, for various n, 2010-08-24) so that we'll stop
ignoring the exit code of "git reflog" by having it on the
left-hand-side of a pipe.
Because of this I'd marked this test as passing under SANITIZE=leak in
f442c94638 (leak tests: mark some rev-parse tests as passing with
SANITIZE=leak, 2021-10-31). As all of it except this specific test
will now pass, let's skip it under the !SANITIZE_LEAK prerequisite.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*rev-parse*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
This sequence works
$ git checkout -b newbranch
$ git commit --allow-empty -m one
$ git show -s newbranch@{1}
and shows the state that was immediately after the newbranch was
created.
But then if you do
$ git reflog expire --expire=now refs/heads/newbranch
$ git commit --allow=empty -m two
$ git show -s newbranch@{1}
you'd be scolded with
fatal: log for 'newbranch' only has 1 entries
While it is true that it has only 1 entry, we have enough
information in that single entry that records the transition between
the state in which the tip of the branch was pointing at commit
'one' to the new commit 'two' built on it, so we should be able to
answer "what object newbranch was pointing at?". But we refuse to
do so.
Make @{0} the special case where we use the new side to look up that
entry. Otherwise, look up @{n} using the old side of the (n-1)th entry
of the reflog.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We taught rev-list a new way to separate options from revisions in
19e8789b23 (revision: allow --end-of-options to end option parsing,
2019-08-06), but rev-parse uses its own parser. It should know about
--end-of-options not only for consistency, but because it may be
presented with similarly ambiguous cases. E.g., if a caller does:
git rev-parse "$rev" -- "$path"
to parse an untrusted input, then it will get confused if $rev contains
an option-like string like "--local-env-vars". Or even "--not-real",
which we'd keep as an option to pass along to rev-list.
Or even more importantly:
git rev-parse --verify "$rev"
can be confused by options, even though its purpose is safely parsing
untrusted input. On the plus side, it will always fail the --verify
part, as it will not have parsed a revision, so the caller will
generally "fail closed" rather than continue to use the untrusted
string. But it will still trigger whatever option was in "$rev"; this
should be mostly harmless, since rev-parse options are all read-only,
but I didn't carefully audit all paths.
This patch lets callers write:
git rev-parse --end-of-options "$rev" -- "$path"
and:
git rev-parse --verify --end-of-options "$rev"
which will both treat "$rev" always as a revision parameter. The latter
is a bit clunky. It would be nicer if we had defined "--verify" to
require that its next argument be the revision. But we have not
historically done so, and:
git rev-parse --verify -q "$rev"
does currently work. I added a test here to confirm that we didn't break
that.
A few implementation notes:
- We don't document --end-of-options explicitly in commands, but rather
in gitcli(7). So I didn't give it its own section in git-rev-parse(1).
But I did call it out specifically in the --verify section, and
include it in the examples, which should show best practices.
- We don't have to re-indent the main option-parsing block, because we
can combine our "did we see end of options" check with "does it start
with a dash". The exception is the pre-setup options, which need
their own block.
- We do however have to pull the "--" parsing out of the "does it start
with dash" block, because we want to parse it even if we've seen
--end-of-options.
- We'll leave "--end-of-options" in the output. This is probably not
technically necessary, as a careful caller will do:
git rev-parse --end-of-options $revs -- $paths
and anything in $revs will be resolved to an object id. However, it
does help a slightly less careful caller like:
git rev-parse --end-of-options $revs_or_paths
where a path "--foo" will remain in the output as long as it also
exists on disk. In that case, it's helpful to retain --end-of-options
to get passed along to rev-list, s it would otherwise see just
"--foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our ref resolution first runs lstat() on any path we try to
look up, because we want to treat symlinks specially (by
resolving them manually and considering them symrefs). But
if the results of `readlink` do _not_ look like a ref, we
fall through to treating it like a normal file, and just
read the contents of the linked path.
Since fcb7c76 (resolve_ref_unsafe(): close race condition
reading loose refs, 2013-06-19), that "normal file" code
path will stat() the file and if we see ENOENT, will jump
back to the lstat(), thinking we've seen inconsistent
results between the two calls. But for a symbolic ref, this
isn't a race: the lstat() found the symlink, and the stat()
is looking at the path it points to. We end up in an
infinite loop calling lstat() and stat().
We can fix this by avoiding the retry-on-inconsistent jump
when we know that we found a symlink. While we're at it,
let's add a comment explaining why the symlink case gets to
this code in the first place; without that, it is not
obvious that the correct solution isn't to avoid the stat()
code path entirely.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a reflog is deleted, e.g. when "git stash" clears its stashes,
"git rev-parse --verify --quiet" dies:
fatal: Log for refs/stash is empty.
The reason is that the get_sha1() code path does not allow us
to suppress this message.
Pass the flags bitfield through get_sha1_with_context() so that
read_ref_at() can suppress the message.
Use get_sha1_with_context1() instead of get_sha1() in rev-parse
so that the --quiet flag is honored.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `test_must_be_be_empty <file>` instead of `test -z "$(cat <file>)"`.
Suggested-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems which have dash as /bin/sh, such as Ubuntu, the final
test (master@{n} for various n) fails with a syntax error while
processing an arithmetic expansion. The syntax error is caused by
using a bare name ('N') as a variable reference in the expression.
In order to avoid the syntax error, we spell the variable reference
as '$N' rather than simply 'N'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in maint-reflog-beyond-horizon are calling test_must_fail
in such a way that the arguments to test_must_fail do, indeed, fail
but not in the manner expected by the test.
This patch removes the unnecessary and unhelpful double quotes.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces tests that verify that rev-parse
parses master@{n} correctly for various values of n less
than, equal to and greater than the number of revisions
in the reference log.
In particular, these tests check that rev-parse exits with a
non-zero status code and prints a message of the
following form to stderr.
fatal: Log for [^ ]* only has [0-9][0-9]* entries.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, when "git rev-parse --verify" was passed at least one
good rev and then anything, it would output something for the good rev
even if it would latter exit on error.
With this patch, we only output something if everything is ok.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, something like:
$ git rev-parse --verify HEAD --default master
did not work, while:
$ git rev-parse --default master --verify HEAD
worked.
This patch fixes that, so that they both work (assuming
HEAD and master can be parsed).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch documents the current behavior of "git rev-parse --verify".
This command is tested both with and without the "--quiet" and
"--default" options.
This shows some problems with the current behavior that will be fixed
in latter patches:
- in case of errors, there should be no good rev output on
stdout,
- with "--default" one test case is broken
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
