The commit-graph feature is tested in isolation by
t5318-commit-graph.sh and t6600-test-reach.sh, but there are many
more interesting scenarios involving commit walks. Many of these
scenarios are covered by the existing test suite, but we need to
maintain coverage when the optional commit-graph structure is not
present.
To allow running the full test suite with the commit-graph present,
add a new test environment variable, GIT_TEST_COMMIT_GRAPH. Similar
to GIT_TEST_SPLIT_INDEX, this variable makes every Git command try
to load the commit-graph when parsing commits, and writes the
commit-graph file after every 'git commit' command.
There are a few tests that rely on commits not existing in
pack-files to trigger important events, so manually set
GIT_TEST_COMMIT_GRAPH to false for the necessary commands.
There is one test in t6024-recursive-merge.sh that relies on the
merge-base algorithm picking one of two ambiguous merge-bases, and
the commit-graph feature changes which merge-base is picked.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an incorrect comment in the new code added in b4da37380b
(unpack-trees: optimize walking same trees with cache-tree -
2018-08-18) and document about the new test variable that is enabled
by default in test-lib.sh in 4592e6080f (cache-tree: verify valid
cache-tree in the test suite - 2018-08-18)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's start with some background about oe_delta_size() and
oe_set_delta_size(). If you already know, skip the next paragraph.
These two are added in 0aca34e826 (pack-objects: shrink delta_size
field in struct object_entry - 2018-04-14) to help reduce 'struct
object_entry' size. The delta size field in this struct is reduced to
only contain max 1MB. So if any new delta is produced and larger than
1MB, it's dropped because we can't really save such a large size
anywhere. Fallback is provided in case existing packfiles already have
large deltas, then we can retrieve it from the pack.
While this should help small machines repacking large repos without
large deltas (i.e. less memory pressure), dropping large deltas during
the delta selection process could end up with worse pack files. And if
existing packfiles already have >1MB delta and pack-objects is
instructed to not reuse deltas, all of them will be dropped on the
floor, and the resulting pack would be definitely bigger.
There is also a regression in terms of CPU/IO if we have large on-disk
deltas because fallback code needs to parse the pack every time the
delta size is needed and just access to the mmap'd pack data is enough
for extra page faults when memory is under pressure.
Both of these issues were reported on the mailing list. Here's some
numbers for comparison.
Version Pack (MB) MaxRSS(kB) Time (s)
------- --------- ---------- --------
2.17.0 5498 43513628 2494.85
2.18.0 10531 40449596 4168.94
This patch provides a better fallback that is
- cheaper in terms of cpu and io because we won't have to read
existing pack files as much
- better in terms of pack size because the pack heuristics is back to
2.17.0 time, we do not drop large deltas at all
If we encounter any delta (on-disk or created during try_delta phase)
that is larger than the 1MB limit, we stop using delta_size_ field for
this because it can't contain such size anyway. A new array of delta
size is dynamically allocated and can hold all the deltas that 2.17.0
can. This array only contains delta sizes that delta_size_ can't
contain.
With this, we do not have to drop deltas in try_delta() anymore. Of
course the downside is we use slightly more memory, even compared to
2.17.0. But since this is considered an uncommon case, a bit more
memory consumption should not be a problem.
Delta size limit is also raised from 1MB to 16MB to better cover
common case and avoid that extra memory consumption (99.999% deltas in
this reported repo are under 12MB; Jeff noted binary artifacts topped
out at about 3MB in some other private repos). Other fields are
shuffled around to keep this struct packed tight. We don't use more
memory in common case even with this limit update.
A note about thread synchronization. Since this code can be run in
parallel during delta searching phase, we need a mutex. The realloc
part in packlist_alloc() is not protected because it only happens
during the object counting phase, which is always single-threaded.
Access to e->delta_size_ (and by extension
pack->delta_size[e - pack->objects]) is unprotected as before, the
thread scheduler in pack-objects must make sure "e" is never updated
by two different threads.
The area under the new lock is as small as possible, avoiding locking
at all in common case, since lock contention with high thread count
could be expensive (most blobs are small enough that delta compute
time is short and we end up taking the lock very often). The previous
attempt to always hold a lock in oe_delta_size() and
oe_set_delta_size() increases execution time by 33% when repacking
linux.git with with 40 threads.
Reported-by: Elijah Newren <newren@gmail.com>
Helped-by: Elijah Newren <newren@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's very very rare that an uncompressed object is larger than 4GB
(partly because Git does not handle those large files very well to
begin with). Let's optimize it for the common case where object size
is smaller than this limit.
Shrink size field down to 31 bits and one overflow bit. If the size is
too large, we read it back from disk. As noted in the previous patch,
we need to return the delta size instead of canonical size when the
to-be-reused object entry type is a delta instead of a canonical one.
Add two compare helpers that can take advantage of the overflow
bit (e.g. if the file is 4GB+, chances are it's already larger than
core.bigFileThreshold and there's no point in comparing the actual
value).
Another note about oe_get_size_slow(). This function MUST be thread
safe because SIZE() macro is used inside try_delta() which may run in
parallel. Outside parallel code, no-contention locking should be dirt
cheap (or insignificant compared to i/o access anyway). To exercise
this code, it's best to run the test suite with something like
make test GIT_TEST_OE_SIZE=4
which forces this code on all objects larger than 3 bytes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using 8 bytes (on 64 bit arch) to store a pointer to a
pack. Use an index instead since the number of packs should be
relatively small.
This limits the number of packs we can handle to 1k. Since we can't be
sure people can never run into the situation where they have more than
1k pack files. Provide a fall back route for it.
If we find out they have too many packs, the new in_pack_by_idx[]
array (which has at most 1k elements) will not be used. Instead we
allocate in_pack[] array that holds nr_objects elements. This is
similar to how the optional in_pack_pos field is handled.
The new simple test is just to make sure the too-many-packs code path
is at least executed. The true test is running
make test GIT_TEST_FULL_IN_PACK_ARRAY=1
to take advantage of other special case tests.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, document about this special mode when running the test
suite.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running test scripts under -x option of the shell is often not a
useful way to debug them, because the error messages from the
commands tests try to capture and inspect are contaminated by the
tracing output by the shell. An earlier work done to make it more
pleasant to run tests under -x with recent versions of bash is
extended to cover posix shells that do not support BASH_XTRACEFD.
* sg/test-x:
travis-ci: run tests with '-x' tracing
t/README: add a note about don't saving stderr of compound commands
t1510-repo-setup: mark as untraceable with '-x'
t9903-bash-prompt: don't check the stderr of __git_ps1()
t5570-git-daemon: don't check the stderr of a subshell
t5526: use $TRASH_DIRECTORY to specify the path of GIT_TRACE log file
t5500-fetch-pack: don't check the stderr of a subshell
t3030-merge-recursive: don't check the stderr of a subshell
t1507-rev-parse-upstream: don't check the stderr of a shell function
t: add means to disable '-x' tracing for individual test scripts
t: prevent '-x' tracing from interfering with test helpers' stderr
Explain in 't/README' why it is a bad idea to redirect and verify the
stderr of compound commands, in the hope that future contributions
will follow this advice and the test suite will keep working with '-x'
tracing and /bin/sh.
While at it, since we can now run the test suite with '-x' without
needing a Bash version supporting BASH_XTRACEFD, remove the now
outdated caution note about non-Bash shells from the description of
the '-x' option.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch resolved most of the test failures caused by
running our test suite with '-x' tracing and /bin/sh, and the
following patches in this series will resolve almost all of the
remaining failures. Unfortunately, not yet all.
Add means to disable '-x' tracing for individual test scripts by
setting the $test_untraceable variable to a non-empty value in the
test script before sourcing 'test-lib.sh'. However, since '-x'
tracing is not an issue with recent Bash versions supporting
BASH_XTRACEFD, i.e. v4.1 and later, don't disable tracing when the
test script is run with such a Bash version even when
$test_untraceable is set.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'test_might_fail' is implemented as a thin wrapper around
'test_must_fail', it also accepts the same options. Mention this in
the docs as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_cmp_rev is a useful function that's used in quite a few test
scripts. It is however not documented in t/README. Document it.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally no longer include copyright notices in new test scripts.
However t/README still mentions it as something to include at the top of
every new script.
Remove that mention as it's outdated.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add LIBPCRE1 and LIBPCRE2 prerequisites which are true when git is
compiled with USE_LIBPCRE1=YesPlease or USE_LIBPCRE2=YesPlease,
respectively.
The syntax of PCRE1 and PCRE2 isn't the same in all cases (see
pcresyntax(3) and pcre2syntax(3)). If test are added that test for
those they'll need to be guarded by these new prerequisites.
The subsequent patch will make use of LIBPCRE2, so LIBPCRE1 isn't
strictly needed for now, but let's add it for consistency and so that
checking for it doesn't have to be done with the less obvious "PCRE,
!LIBPCRE2", which while semantically the same is more confusing, and
would lead to bugs if PCRE v3 is ever released as the tests would mean
v1, not any non-v2 version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a PTHREADS prerequisite which is false when git is compiled with
NO_PTHREADS=YesPlease.
There's lots of custom code that runs when threading isn't available,
but before this prerequisite there was no way to test it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the LIBPCRE prerequisite to PCRE. This is for preparation for
libpcre2 support, where having just "LIBPCRE" would be confusing as it
implies v1 of the library.
None of these tests are incompatible between versions 1 & 2 of
libpcre, it's less confusing to give them a more general name to make
it clear that they work on both library versions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the test_have_prereq documentation so that it's clear in the
reader's mind when the text says "most common use of this directly"
what the answer to "as opposed to what?" is.
Usually this function isn't used in lieu of using the prerequisite
support built into test_expect_*, mention that explicitly.
This changes documentation that I added in commit
9a897893a7 ("t/README: Document the prereq functions, and 3-arg
test_*", 2010-07-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mention of "Inside the <script> part, the standard
output..." to use the definite article, which makes more sense in this
context.
This changes documentation I originally added back in commit
20873f45e7 ("t/README: Document the do's and don'ts of tests",
2010-07-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a link to the web version of the TAP::Parser::Grammar
documentation to link to metacpan.org instead of search.cpan.org.
This is something I added back in commit 20873f45e7 ("t/README:
Document the do's and don'ts of tests", 2010-07-02), at the time
search.cpan.org was the more actively maintained CPAN web-interface,
nowadays that's metacpan.org.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Travis CI configuration we ship ran the tests with --verbose
option but this risks non-TAP output that happens to be "ok" to be
misinterpreted as TAP signalling a test that passed. This resulted
in unnecessary failure. This has been corrected by introducing a
new mode to run our tests in the test harness to send the verbose
output separately to the log file.
* jk/tap-verbose-fix:
test-lib: bail out when "-v" used under "prove"
travis: use --verbose-log test option
test-lib: add --verbose-log option
test-lib: handle TEST_OUTPUT_DIRECTORY with spaces
The "--verbose" option redirects output from arbitrary
test commands to stdout. This is useful for examining the
output manually, like:
./t5547-push-quarantine.sh -v | less
But it also means that the output is intermingled with the
TAP directives, which can confuse a TAP parser like "prove".
This has always been a potential problem, but became an
issue recently when one test happened to output the word
"ok" on a line by itself, which prove interprets as a test
success:
$ prove t5547-push-quarantine.sh :: -v
t5547-push-quarantine.sh .. 1/? To dest.git
* [new branch] HEAD -> master
To dest.git
! [remote rejected] reject -> reject (pre-receive hook declined)
error: failed to push some refs to 'dest.git'
fatal: git cat-file d08c8eba97f4e683ece08654c7c8d2ba0c03b129: bad file
t5547-push-quarantine.sh .. Failed -1/4 subtests
Test Summary Report
-------------------
t5547-push-quarantine.sh (Wstat: 0 Tests: 5 Failed: 0)
Parse errors: Tests out of sequence. Found (2) but expected (3)
Tests out of sequence. Found (3) but expected (4)
Tests out of sequence. Found (4) but expected (5)
Bad plan. You planned 4 tests but ran 5.
Files=1, Tests=5, 0 wallclock secs ( 0.01 usr + 0.01 sys = 0.02 CPU)
Result: FAIL
One answer is "if it hurts, don't do it", but that's not
quite the whole story. The Travis tests use "--verbose
--tee" so that they can get the benefit of prove's parallel
options, along with a verbose log in case there is a
failure. We just need the verbose output to go to the log,
but keep stdout clean.
Getting this right turns out to be surprisingly difficult.
Here's the progression of alternatives I considered:
1. Add an option to write verbose output to stderr. This is
hard to capture, though, because we want each test to
have its own log (because they're all run in parallel
and the jumbled output would be useless).
2. Add an option to write verbose output to a file in
test-results. This works, but the log is missing all of
the non-verbose output, which gives context.
3. Like (2), but teach say_color() to additionally output
to the log. This mostly works, but misses any output
that happens outside of the say() functions (which isn't
a lot, but is a potential maintenance headache).
4. Like (2), but make the log file the same as the "--tee"
file. That almost works, but now we have two processes
opening the same file. That gives us two separate
descriptors, each with their own idea of the current
position. They'll each start writing at offset 0, and
overwrite each other's data.
5. Like (4), but in each case open the file for appending.
That atomically positions each write at the end of the
file.
It's possible we may still get sheared writes between
the two processes, but this is already the case when
writing to stdout. It's not a problem in practice
because the test harness generally waits for snippets to
finish before writing the TAP output.
We can ignore buffering issues with tee, because POSIX
mandates that it does not buffer. Likewise, POSIX
specifies "tee -a", so it should be available
everywhere.
This patch implements option (5), which seems to work well
in practice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running tests with '-x' option to trace the individual command
executions is a useful way to debug test scripts, but some tests
that capture the standard error stream and check what the command
said can be broken with the trace output mixed in. When running
our tests under "bash", however, we can redirect the trace output
to another file descriptor to keep the standard error of programs
being tested intact.
* jk/test-send-sh-x-trace-elsewhere:
test-lib: set BASH_XTRACEFD automatically
Running tests with '-x' option to trace the individual command
executions is a useful way to debug test scripts, but some tests
that capture the standard error stream and check what the command
said can be broken with the trace output mixed in. When running
our tests under "bash", however, we can redirect the trace output
to another file descriptor to keep the standard error of programs
being tested intact.
* jk/test-send-sh-x-trace-elsewhere:
test-lib: set BASH_XTRACEFD automatically
Passing "-x" to a test script enables the shell's "set -x"
tracing, which can help with tracking down the command that
is causing a failure. Unfortunately, it can also _cause_
failures in some tests that redirect the stderr of a shell
function. Inside the function the shell continues to
respect "set -x", and the trace output is collected along
with whatever stderr is generated normally by the function.
You can see an example of this by running:
./t0040-parse-options.sh -x -i
which will fail immediately in the first test, as it
expects:
test_must_fail some-cmd 2>output.err
to leave output.err empty (but with "-x" it has our trace
output).
Unfortunately there isn't a portable or scalable solution to
this. We could teach test_must_fail to disable "set -x", but
that doesn't help any of the other functions or subshells.
However, we can work around it by pointing the "set -x"
output to our descriptor 4, which always points to the
original stderr of the test script. Unfortunately this only
works for bash, but it's better than nothing (and other
shells will just ignore the BASH_XTRACEFD variable).
The patch itself is a simple one-liner, but note the caveats
in the accompanying comments.
Automatic tests for our "-x" option may be a bit too meta
(and a pain, because they are bash-specific), but I did
confirm that it works correctly both with regular "-x" and
with "--verbose-only=1". This works because the latter flips
"set -x" off and on for particular tests (if it didn't, we
would get tracing for all tests, as going to descriptor 4
effectively circumvents the verbose flag).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When prefixing a Git call in the test suite with 'debug ', it will
now be run with GDB, allowing the developer to debug test failures
more conveniently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to miss an "&&"-chain in a test script, like:
test_expect_success 'check something important' '
cmd1 &&
cmd2
cmd3
'
The test harness will notice if cmd3 fails, but a failure of
cmd1 or cmd2 will go unnoticed, as their exit status is lost
after cmd3 runs.
The toy example above is easy to spot because the "cmds" are
all the same length, but real code is much more complicated.
It's also difficult to detect these situations by statically
analyzing the shell code with regexps (like the
check-non-portable-shell script does); there's too much
context required to know whether a &&-chain is appropriate
on a given line or not.
This patch instead lets the shell check each test by
sticking a command with a specific and unusual return code
at the top of each test, like:
(exit 117) &&
cmd1 &&
cmd2
cmd3
In a well-formed test, the non-zero exit from the first
command prevents any of the rest from being run, and the
test's exit code is 117. In a bad test (like the one above),
the 117 is lost, and cmd3 is run.
When we encounter a failure of this check, we abort the test
script entirely. For one thing, we have no clue which subset
of the commands in the test snippet were actually run.
Running further tests would be pointless, because we're now
in an unknown state. And two, this is not a "test failure"
in the traditional sense. The test script is buggy, not the
code it is testing. We should be able to fix these problems
in the script once, and not have them come back later as a
regression in git's code.
After checking a test snippet for --chain-lint, we do still
run the test itself. We could actually have a pure-lint
mode which just checks each test, but there are a few
reasons not to. One, because the tests are executing
arbitrary code, which could impact the later environment
(e.g., that could impact which set of tests we run at all).
And two, because a pure-lint mode would still be expensive
to run, because a significant amount of code runs outside of
the test_expect_* blocks. Instead, this option is designed
to be used as part of a normal test suite run, where it adds
very little overhead.
Turning on this option detects quite a few problems in
existing tests, which will be fixed in subsequent patches.
However, there are a number of places it cannot reach:
- it cannot find a failure to break out of loops on error,
like:
cmd1 &&
for i in a b c; do
cmd2 $i
done &&
cmd3
which will not notice failures of "cmd2 a" or "cmd b"
- it cannot find a missing &&-chain inside a block or
subfunction, like:
foo () {
cmd1
cmd2
}
foo &&
bar
which will not notice a failure of cmd1.
- it only checks tests that you run; every platform will
have some tests skipped due to missing prequisites,
so it's impossible to say from one run that the test
suite is free of broken &&-chains. However, all tests get
run by _somebody_, so eventually we will notice problems.
- it does not operate on test_when_finished or prerequisite
blocks. It could, but these tends to be much shorter and
less of a problem, so I punted on them in this patch.
This patch was inspired by an earlier patch by Jonathan
Nieder:
http://article.gmane.org/gmane.comp.version-control.git/235913
This implementation and all bugs are mine.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We require use of test_must_fail to check expected non-zero exit by
Git itself, but discourage test_must_fail to be used for checking
exit status of non Git commands that are supplied by the system.
The current text explains the reason for the former but not the
latter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually running a test under "-v" makes it clear which
command is failing. However, sometimes it can be useful to
also see a complete trace of the shell commands being run in
the test. You can do so without any support from the test
suite by running "sh -x tXXXX-foo.sh". However, this
produces quite a large bit of output, as we see a trace of
the entire test suite.
This patch instead introduces a "-x" option to the test
scripts (i.e., "./tXXXX-foo.sh -x"). When enabled, this
turns on "set -x" only for the tests themselves. This can
still be a bit verbose, but should keep things to a more
manageable level. You can even use "--verbose-only" to see
the trace only for a specific test.
The implementation is a little invasive. We turn on the "set
-x" inside the "eval" of the test code. This lets the eval
itself avoid being reported in the trace (which would be
long, and redundant with the verbose listing we already
showed). And then after the eval runs, we do some trickery
with stderr to avoid showing the "set +x" to the user.
We also show traces for test_cleanup functions (since they
can impact the test outcome, too). However, we do avoid
running the noop ":" cleanup (the default if the test does
not use test_cleanup at all), as it creates unnecessary
noise in the "set -x" output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow specifying only certain individual test pieces to be run
using a range notation (e.g. "t1234-test.sh --run='1-4 6 8 9-'").
* ib/test-selectively-run:
t0000-*.sh: fix the GIT_SKIP_TESTS sub-tests
test-lib: '--run' to run only specific tests
test-lib: tests skipped by GIT_SKIP_TESTS say so
test-lib: document short options in t/README
test_write_lines carefully quotes its arguments as "$@", so
test_write_lines "a b" c
writes two lines as requested, not three.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow better control of the set of tests that will be executed for a
single test suite. Mostly useful while debugging or developing as it
allows to focus on a specific test.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most arguments that could be provided to a test have short forms.
Unless documented, the only way to learn them is to read the code.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, we assumed that calling a bare "perl" in
the test scripts was OK, because we would find the perl from
the user's PATH, and we were only asking that perl to do
basic operations that work even on old versions of perl.
Later, we found that some systems really prefer to use
$PERL_PATH even for these basic cases, because the system
perl misbehaves in some way (e.g., by handling line endings
differently). We then switched "perl" invocations to
"$PERL_PATH" to respect the user's choice.
Having to use "$PERL_PATH" is ugly and cumbersome, though.
Instead, let's provide a perl() shell function that tests
can use, which will transparently do the right thing.
Unfortunately, test writers still have to use $PERL_PATH in
certain situations, so we still need to keep the advice in
the README.
Note that this may fix test failures in t5004, t5503, t6002,
t6003, t6300, t8001, and t8002, depending on your system's
perl setup. All of these can be detected by running:
ln -s /bin/false bin-wrappers/perl
make test
which fails before this patch, and passes after.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git build system supports a NO_PERL switch to avoid installing
perl bindings or other features (like "git add --patch") that rely on
perl on runtime, but even with NO_PERL it has not been possible for a
long time to run tests without perl. Helpers such as
nul_to_q () {
"$PERL_PATH" -pe 'y/\000/Q/'
}
use perl as a better tr or sed and are regularly used in tests without
worrying to add a PERL prerequisite.
Perl is portable enough that it seems fine to keep relying on it for
this kind of thing in tests (and more readable than the alternative of
trying to find POSIXy equivalents). Update the test documentation to
clarify this.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows N instances of tests run in parallel, each running 1/N parts
of the test suite under Valgrind, to speed things up.
* tr/test-v-and-v-subtest-only:
perf-lib: fix start/stop of perf tests
test-lib: support running tests under valgrind in parallel
test-lib: allow prefixing a custom string before "ok N" etc.
test-lib: valgrind for only tests matching a pattern
test-lib: verbose mode for only tests matching a pattern
test-lib: self-test that --verbose works
test-lib: rearrange start/end of test_expect_* and test_skip
test-lib: refactor $GIT_SKIP_TESTS matching
test-lib: enable MALLOC_* for the actual tests
With the new --valgrind-only=<pattern> option, one can enable
--valgrind at a per-test granularity, exactly analogous to
--verbose-only from the previous commit.
The options are wired such that --valgrind implies --verbose (as
before), but --valgrind-only=<pattern> implies
--verbose-only=<pattern> unless --verbose is also in effect.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --verbose-only=<pattern> option, one can enable --verbose
at a per-test granularity. The pattern is matched against the test
number, e.g.
./t0000-basic.sh --verbose-only='2[0-2]'
to see only the full output of test 20-22, while showing the rest in the
one-liner format.
As suggested by Jeff King, this takes care to wrap the entire
test_expect_* block, but nothing else, in the verbose toggling. We
can use the test_start/end functions from the previous commit for the
purpose.
This is arguably not *too* useful on its own, but makes the next patch
easier to follow.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests that check the behaviour of symbolic links stored in the
index or the tree objects do not have to be skipped on a filesystem
that lack symbolic link support.
* js/test-ln-s-add:
t4011: remove SYMLINKS prerequisite
t6035: use test_ln_s_add to remove SYMLINKS prerequisite
t3509, t4023, t4114: use test_ln_s_add to remove SYMLINKS prerequisite
t3100: use test_ln_s_add to remove SYMLINKS prerequisite
t3030: use test_ln_s_add to remove SYMLINKS prerequisite
t0000: use test_ln_s_add to remove SYMLINKS prerequisite
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases)
tests: introduce test_ln_s_add
t3010: modernize style
test-chmtime: Fix exit code on Windows
Add a new function that creates a symbolic link and adds it to the index
to be used in cases where a symbolic link is not required on the file
system. We will use it to remove many SYMLINKS prerequisites from test
cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test wants to make sure there is no <string> in an output
file, we should just say "! grep string output".
"test_must_fail" is there only to test Git command and catch unusual
deaths we know about (e.g. segv) as an error, not as an expected
failure. "test_must_fail grep string output" is unnecessary, as
we are not making sure the system binaries do not dump core or
anything like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Typo fix: replacing it's -> its
t: make PIPE a standard test prerequisite
archive: clarify explanation of --worktree-attributes
t/README: --immediate skips cleanup commands for failed tests
The 'PIPE' test prerequisite was already defined identically by t9010
and t9300, therefore it makes sense to make it a predefined
prerequisite.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --valgrind=memcheck-fast, the tests run under memcheck but
without the autodetected --track-origins. If you just run valgrind to
see *if* there is any memory issue with your program, the extra
information is not needed, and it comes at a roughly 30% hit in
runtime.
While it is possible to achieve the same through GIT_VALGRIND_OPTIONS,
this should be more discoverable and hopefully encourage more users to
run their tests with valgrind.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running tests under helgrind and DRD recently proved useful in
tracking down thread interaction issues. This can unfortunately not
be done through GIT_VALGRIND_OPTIONS because any tool other than
memcheck would complain about unknown options.
Let --valgrind take an optional parameter that describes the valgrind
tool to invoke. The default mode is to run memcheck as before.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was missed in 3da9365 (Tests: let --valgrind imply --verbose and
--tee, 2009-02-04).
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
UTF8 behaviour of the filesystem (conversion from nfd to nfc) plays a
role in several tests and is tested in several tests. Therefore, move
the test from t0050 into the test lib and use the prerequisite in t0050.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case insensitivity plays a role in several tests and is tested in several
tests. Therefore, move the test from t003 into the test lib and use the
prerequisite in t0003.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few more advices that we often have to give to new test
writers.
Also update an example where a double quote pair is used to enclose
a test body to use a single quote pair, which is more readable and
more importantly gives saner semantics for variable substitution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm no longer running the Git smoke testing service at
smoke.git.nix.is due to Smolder being a fragile piece of software not
having time to follow through on making it easy for third parties to
run and submit their own smoke tests.
So remove the support in Git for sending smoke tests to
smoke.git.nix.is, it's still easy to modify the test suite to submit
smokes somewhere else.
This reverts the following commits:
Revert "t/README: Add SMOKE_{COMMENT,TAGS}= to smoke_report target" -- e38efac87d
Revert "t/README: Document the Smoke testing" -- d15e9ebc5c
Revert "t/Makefile: Create test-results dir for smoke target" -- 617344d77b
Revert "tests: Infrastructure for Git smoke testing" -- b6b84d1b74
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 781f76b15 (test-lib: redirect stdin of tests) you can't simply put a
"bash &&" into a test for debugging purposes anymore. Instead you'll have
to use "bash <&6 >&3 2>&4".
As that invocation is not that easy to remember add the test_pause
convenience function. It invokes "$SHELL_PATH" to provide a sane shell
for the user.
This function also checks if the -v flag is given and will error out if
that is not the case instead of letting the test hang until ^D is pressed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
This modest patch adds simple tests for git grep -P/--perl-regexp and
its interoperation with -i and -w.
Tests are only enabled when prerequisite LIBPCRE is defined (it's
automatically set based on USE_LIBPCRE in test-lib.sh).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document all test function arguments in the same way.
While at it, tweak the description of test_path_is_* (thanks to Junio),
and correct some grammatical errors.
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
* maint:
Update draft release notes to 1.7.4.2
Work around broken ln on solaris as used in t8006
t/README: Add a note about running commands under valgrind
The test suite runs valgrind with certain options activated. Add a
note saying how to run commands under the same conditions as the test
suite does.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds just a "do it this way" instruction without a lot of explanation,
because the details are too complex to be explained at this point.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests check their output with code like the following:
test "$(git ls-files -u B | wc -l)" -eq 3 || {
echo "BAD: should have left stages for B"
return 1
}
The verbose failure condition is used because test, unlike
diff, does not print any useful information about the
nature of the failure when it fails.
Introduce a test_line_count function to help. If used like
git ls-files -u B >output &&
test_line_count -eq 3 output
it will produce output like
test_line_count: line count for output !-eq 3
100644 b023018cabc396e7692c70bbf5784a93d3f738ab 2 hi.c
100644 45b983be36b73c0788dc9cbcb76cbb80fc7bb057 3 hi.c
on failure.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can run "make DEFAULT_TEST_TARGET=prove test" to run the test under
"prove" (or $(PROVE) if set). The output is a bit easier to read when
running many tests in parallel.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Liked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change test_expect_code to be a normal test command instead of a
top-level command.
As a top-level command it would fail in cases like:
test_expect_code 1 'phoney' '
foo && bar && (exit 1)
'
Here the test might incorrectly succeed if "foo" or "bar" happened to
fail with exit status 1. Instead we now do:
test_expect_success 'phoney' '
foo && bar && test_expect_code 1 "(exit 1)"
'
Which will only succeed if "foo" and "bar" return status 0, and "(exit
1)" returns status 1. Note that test_expect_code has been made slightly
noisier, as it reports the exit code it receives even upon success.
Some test code in t0000-basic.sh relied on the old semantics of
test_expect_code to test the test_when_finished command. I've
converted that code to use an external test similar to the TODO test I
added in v1.7.3-rc0~2^2~3.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
The example I initially added to "Skipping tests" wasn't very
good. We'd rather skip tests using the three-arg prereq form to the
test_* functions, not bail out with a skip message.
Change the documentation to reflect that, but retain the bailout
example under a disclaimer which explains that it's probably not a
good idea to use it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having no coverage at all is almost always a bad sign, but trying to
attain 100% coverage everywhere is usually a waste of time. Add a
paragraph to explain this to future test writers.
Inspired-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how test writers can generate coverage reports, to ensure
that their tests are really testing the code they think they're
testing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The smoke server supports a free form text field with comments about a
report, and a comma delimited list of tags. Change the smoke_report
target to expose this functionality. Now smokers can send more data
that explains and categorizes the reports they're submitting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git now has a smoke testing service at http://smoke.git.nix.is that
anyone can send reports to. Change the t/README file to mention this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The README for the test library suggested that you grep the
test-lib.sh for test_set_prereq to see what the preset prerequisites
were.
Remove that bit, and write a section explaining all the preset
prerequisites. Most of the text was lifted from from Junio C Hamano
and Johannes Sixt, See the "Tests in Cygwin" thread in May 2009 for
the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_have_prereq function in test-lib.sh to support a
comma-separated list of prerequisites. This is useful for tests that
need e.g. both POSIXPERM and SANITY.
The implementation was stolen from Junio C Hamano and Johannes Sixt,
the tests and documentation were not. See the "Tests in Cygwin" thread
in May 2009 for the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper functions are implemented, documented, and used in a few
places to validate them, but not everywhere to avoid useless code churn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct advice should have been taken from c289c31 (t/t7006: ignore
return status of shell's unset builtin, 2010-06-02). A real-life issue
we experienced was with "unset", not with "export" (exporting an
unset variable may have similar portability issues, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some have found the wording of the description to be somewhat ambiguous
with respect to when it is desirable to use test_must_fail instead of
"! <git-command>". Tweak the wording somewhat to hopefully clarify that
it is _because_ test_must_fail can detect segmentation fault that it is
desirable to use it instead of "! <git-command>".
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no documentation in t/README for test_must_fail,
test_might_fail, test_cmp, or test_when_finished.
Reported-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "Do's, don'ts & things to keep in mind" subsection to the
"Writing Tests" documentation. Much of this is based on Junio C
Hamano's "Test your stuff" section in
<7vhbkj2kcr.fsf@alter.siamese.dyndns.org>.
I turned it into a list of do's and don'ts to make it easier to skim
it, and integrated my note that a TAP harness will get confused if you
print "ok" or "not ok" at the beginning of a line.
Thad had to be fixed in 335f87871f when
TAP support was introduced.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_expect_code (which was introduced in d3bfdb75) never had any
documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was do documentation for the test_external_without_stderr and
test_external functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no documentation for the test_set_prereq and
test_have_prereq functions, or the three-arg form of
test_expect_success and test_expect_failure.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a unique trash directory for each test, not a single directory
as the previous documentation suggested.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've had this option since f423ef5 (tests: allow user to specify
trash directory location, 2009-08-09). Make it easier to look up :-)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only put bin-wrappers in the PATH (not GIT_EXEC_PATH), to emulate the
default installed user environment, and ensure all the programs run
correctly in such an environment. This is now the default, although
it can be overridden with a --with-dashes test option when running
tests.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added without documentation in 2009-03-16 (6720721).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make much sense to run the (expensive) valgrind tests and
not look at the output.
To prevent output from scrolling out of reach, the parameter --tee is
implied, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tests are run in parallel and a few tests fail, it does not help
that the output of the terminal is totally confusing, as you rarely know
which test which line came from.
So introduce the option '--tee' which triggers that the output of the
tests will be written to t/test-results/$TEST.out in addition to the
terminal, where $TEST is the basename of the script.
Unfortunately, there seems to be no way to redirect a given file
descriptor to a specified subprocess in POSIX shell, only redirection
to a file is supported via 'exec > $FILE'.
At least with bash, one might think that 'exec >($COMMAND)' would work
as intended, but it does not.
The common way to work around the lack of proper tools support is to
work with named pipes, alas, one of our most beloved platforms does not
really support named pipes. Besides, we would need a pipe for every
script, as the whole point of this patch is to allow parallel execution.
Therefore, we handle the redirection in the following way: when '--tee'
was passed to the test script, the variable GIT_TEST_TEE_STARTED is set
(to avoid triggering that code path again) and the script is started
_again_, in a subshell, redirected to the command "tee".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the ability to use valgrind's memcheck tool to
diagnose memory problems in Git while running the test scripts.
It requires valgrind 3.4.0 or newer.
It works by creating symlinks to a valgrind script, which have the same
name as our Git binaries, and then putting that directory in front of
the test script's PATH as well as set GIT_EXEC_PATH to that directory.
Git scripts are symlinked from that directory directly.
That way, Git binaries called by Git scripts are valgrinded, too.
Valgrind can be used by specifying "GIT_TEST_OPTS=--valgrind" in the
make invocation. Any invocation of git that finds any errors under
valgrind will exit with failure code 126. Any valgrind output will go
to the usual stderr channel for tests (i.e., /dev/null, unless -v has
been specified).
If you need to pass options to valgrind -- you might want to run
another tool than memcheck, for example -- you can set the environment
variable GIT_VALGRIND_OPTIONS.
A few default suppressions are included, since libz seems to trigger
quite a few false positives. We'll assume that libz works and that we
can ignore any errors which are reported there.
Note: it is safe to run the valgrind tests in parallel, as the links in
t/valgrind/bin/ are created using proper locking.
Initial patch and all the hard work by Jeff King.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we just need to add a commit with a given (short) name, that will
be tagged with the same name. Now, relatively complicated graphs can be
constructed easily and in a clear fashion:
test_commit A &&
test_commit B &&
git checkout A &&
test_commit C &&
test_merge D B
will construct this graph:
A - B
\ \
C - D
For simplicity, files whose name is the lower case version of the commit
message (to avoid a warning about ambiguous names) will be committed, with
the corresponding commit messages as contents.
If you need to provide a different file/different contents, you can use
the more explicit form
test_commit $MESSAGE $FILENAME $CONTENTS
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add description of GIT_SKIP_TESTS variable, taken almost verbatim
(adjusting for conventions in t/README) from the commit message in
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --long-tests option to test-lib.sh, which enables tests to
selectively run more exhaustive (longer running, potentially
brute-force) tests. Such exhaustive tests would only be useful if one
works on the specific module that is being tested -- for a general "cd
t/; make" to check whether everything is OK, such exhaustive tests
shouldn't be run by default since the longer it takes to run the
tests, the less often they are actually run.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Makefile in the test suite directory considers any file
matching t[0-9][0-9][0-9][0-9]-*.sh as the top-level test script
to be executed. Unfortunately this was not documented, and the
common test library, t6000-lib.sh was named to match that
pattern. This caused t6000-lib.sh to be called from Makefile as
the top-level program, causing it to leave t/sed.script file
behind. Rename it to t6000lib.sh to prevent this, and document
the naming convention a bit more clearly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The documentation of the test harness still refer to old
numbering and also contains an obvious typo.
Also "make test" should be run after making sure we have built
all binaries, since test is designed to test the newly built
ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Petr Baudis <pasky@ucw.cz>
First digit: "family", e.g. the absolute basics and global stuff (0),
the basic db-side commands (read-tree, write-tree, commit-tree), the
basic working-tree-side commands (checkout-cache, update-cache), the
other basic commands (ls-files), the diff commands, the pull commands,
exporting commands, revision tree commands...
Second digit: the particular command we are testing
Third digit: (optionally) the particular switch or group of switches
we are testing
Freeform part: commandname-details
Described in the README.
mv t1000-checkout-cache.sh t2000-checkout-cache-clash.sh
mv t1001-checkout-cache.sh t2001-checkout-cache-clash.sh
mv t0200-update-cache.sh t2010-update-cache-badpath.sh
mv t0400-ls-files.sh t3000-ls-files-others.sh
mv t0500-ls-files.sh t3010-ls-files-killed.sh
This adds instruction for running tests, and writing new tests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Updated to the new tidied up output style.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
