If we receive a request with extended attributes after the
NUL, we try to write those attributes to the log. We do so
with a "%s" format specifier, which will only show
characters up to the first NUL.
That's enough for printing a "host=" specifier. But since
dfe422d04d (daemon: recognize hidden request arguments,
2017-10-16) we may have another NUL, followed by protocol
parameters, and those are not logged at all.
Let's cut out the attempt to show the whole string, and
instead log when we parse individual attributes. We could
leave the "extended attributes (%d bytes) exist" part of the
log, which in theory could alert us to attributes that fail
to parse. But anything we don't parse as a "host=" parameter
gets blindly added to the "protocol" attribute, so we'd see
it in that part of the log.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If receive a request like:
git-upload-pack /foo.git\0host=localhost
we mark the offset of the NUL byte as "len", and then log
the bytes after the NUL with a "%.*s" placeholder, using
"pktlen - len" as the length, and "line + len + 1" as the
start of the string.
This is off-by-one, since the start of the string skips past
the separating NUL byte, but the adjusted length includes
it. Fortunately this doesn't actually read past the end of
the buffer, since "%.*s" will stop when it hits a NUL. And
regardless of what is in the buffer, packet_read() will
always add an extra NUL terminator for safety.
As an aside, the git.git client sends an extra NUL after a
"host" field, too, so we'd generally hit that one first, not
the one added by packet_read(). You can see this in the test
output which reports 15 bytes, even though the string has
only 14 bytes of visible data. But the point is that even a
client sending unusual data could not get us to read past
the end of the buffer, so this is purely a cosmetic fix.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we start git-daemon for our tests, we send its stderr
log stream to a named pipe. We synchronously read the first
line to make sure that the daemon started, and then dump the
rest to descriptor 4. This is handy for debugging test
output with "--verbose", but the tests themselves can't
access the log data.
Let's dump the log into a file, as well, so that future
tests can check the log. There are a few subtleties worth
calling out here:
- we'll continue to send output to descriptor 4 for
viewing/debugging, which would imply swapping out "cat"
for "tee". But we want to ensure that there's no
buffering, and "tee" doesn't have a standard way to
ask for that. So we'll use a shell loop around "read"
and "printf" instead. That ensures that after a request
has been served, the matching log entries will have made
it to the file.
- the existing first-line shell loop used read/echo. We'll
switch to consistently using "read -r" and "printf" to
relay data as faithfully as possible.
- we open the logfile for append, rather than just output.
That makes it OK for tests to truncate the logfile
without restarting the daemon (the OS will atomically
seek to the end of the file when outputting each line).
That allows tests to look at the log without worrying
about pollution from earlier tests.
Helped-by: Lucas Werkmeister <mail@lucaswerkmeister.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separating out the implementation of the handshake when starting a
long-running subprocess (for example, as is done for a clean/smudge
filter) was done in commit fa64a2fdbe ("sub-process: refactor
handshake to common function", 2017-07-26), but its documentation still
resides in gitattributes. Split out the documentation as well.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually care about the clone operation here; we
just want to know if we were able to actually contact the
remote repository. Using ls-remote does that more
efficiently, and without us having to worry about managing
the tmp.git directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git push fails due to server-side WebDAV error, it's not easy to
point to the main culprit. Additional information about exact cURL
error and HTTP server response is helpful for debugging purpose.
New error log helped me pinpoint failing test t5540-http-push-webdav
to a missing Apache dependency in Fedora 27:
https://bugzilla.redhat.com/show_bug.cgi?id=1491151
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The penalty of 5 makes clang-format very eager to put even short type
declarations (e.g. "extern int") into a separate line, even when
breaking parameters list is sufficient.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 356ee4659b ("sequencer: try to commit without forking 'git
commit'", 2017-11-24) forgot to run the 'prepare-commit-msg' hook when
creating the commit. Fix this by writing the commit message to a
different file and running the hook. Using a different file means that
if the commit is cancelled the original message file is
unchanged. Also move the checks for an empty commit so the order
matches 'git commit'.
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that cherry-pick and rebase call the 'prepare-commit-msg' hook
correctly. The expected values for the hook arguments are taken to
match the current master branch. I think there is scope for improving
the arguments passed so they make a bit more sense - for instance
cherry-pick currently passes different arguments depending on whether
the commit message is being edited. Also the arguments for rebase
could be improved. Commit 7c4188360a ("rebase -i: proper
prepare-commit-msg hook argument when squashing", 2008-10-3) apparently
changed things so that when squashing rebase would pass 'squash' as
the argument to the hook but that has been lost.
I think that it would make more sense to pass 'message' for revert and
cherry-pick -x/-s (i.e. cases where there is a new message or the
current message in modified by the command), 'squash' when squashing
with a new message and 'commit HEAD/CHERRY_PICK_HEAD'
otherwise (picking and squashing without a new message).
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the indentation and style of the hook script in preparation for
further changes.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If <msg> or <patch> files can't be opened, then mailinfo() returns an
error before it even initializes mi->p_hdr_data or mi->s_hdr_data.
When cmd_mailinfo() then calls clear_mailinfo(), we dereference the
NULL pointers trying to free their contents.
Signed-off-by: Juan F. Codagnone <jcodagnone@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a0a967568e ("update-index --split-index: do not split if $GIT_DIR is
read only", 2014-06-13), we tried to make sure we can still write an
index, even if the shared index can not be written.
We did so by just calling 'do_write_locked_index()' just before
'write_shared_index()'. 'do_write_locked_index()' always at least
closes the tempfile nowadays, and used to close or commit the lockfile
if COMMIT_LOCK or CLOSE_LOCK were given at the time this feature was
introduced. COMMIT_LOCK or CLOSE_LOCK is passed in by most callers of
'write_locked_index()'.
After calling 'write_shared_index()', we call 'write_split_index()',
which calls 'do_write_locked_index()' again, which then tries to use the
closed lockfile again, but in fact fails to do so as it's already
closed. This eventually leads to a segfault.
Make sure to write the main index only once.
[nd: most of the commit message and investigation done by Thomas, I only
tweaked the solution a bit]
Helped-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the custom calls to mru.[ch] with calls to list.h. This patch is
the final step in removing the mru API completely and inlining the logic.
This patch leads to significant code reduction and the mru API hence, is
not a useful abstraction anymore.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" was taught to ignore local changes to submodules as
they do not interfere with the partial addition of regular changes
anyway.
* nd/add-i-ignore-submodules:
add--interactive: ignore submodule changes except HEAD
Instead of maintaining home-grown email address parsing code, ship
a copy of reasonably recent Mail::Address to be used as a fallback
in 'git send-email' when the platform lacks it.
* mm/send-email-fallback-to-local-mail-address:
send-email: add test for Linux's get_maintainer.pl
perl/Git: remove now useless email-address parsing code
send-email: add and use a local copy of Mail::Address
Fix for a commented-out code to adjust it to a rather old API change.
* ys/bisect-object-id-missing-conversion-fix:
bisect: debug: convert struct object to object_id
"git stash -- <pathspec>" incorrectly blew away untracked files in
the directory that matched the pathspec, which has been corrected.
* tg/stash-with-pathspec-fix:
stash: don't delete untracked files that match pathspec
When resetting the working tree files recursively, the working tree
of submodules are now also reset to match.
* sb/submodule-update-reset-fix:
submodule: submodule_move_head omits old argument in forced case
unpack-trees: oneway_merge to update submodules
t/lib-submodule-update.sh: fix test ignoring ignored files in submodules
t/lib-submodule-update.sh: clarify test
"git commit --fixup" did not allow "-m<message>" option to be used
at the same time; allow it to annotate resulting commit with more
text.
* ab/commit-m-with-fixup:
commit: add support for --fixup <commit> -m"<extra message>"
commit doc: document that -c, -C, -F and --fixup with -m error
"perf" test output can be sent to codespeed server.
* cc/codespeed:
perf/run: read GIT_PERF_REPO_NAME from perf.repoName
perf/run: learn to send output to codespeed server
perf/run: learn about perf.codespeedOutput
perf/run: add conf_opts argument to get_var_from_env_or_config()
perf/aggregate: implement codespeed JSON output
perf/aggregate: refactor printing results
perf/aggregate: fix checking ENV{GIT_PERF_SUBSECTION}
"diff" family of commands learned "--find-object=<object-id>" option
to limit the findings to changes that involve the named object.
* sb/diff-blobfind-pickaxe:
diff: use HAS_MULTI_BITS instead of counting bits manually
diff: properly error out when combining multiple pickaxe options
diffcore: add a pickaxe option to find a specific blob
diff: introduce DIFF_PICKAXE_KINDS_MASK
diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit
diff.h: make pickaxe_opts an unsigned bit field
"git clone $there $here" is allowed even when here directory exists
as long as it is an empty directory, but the command incorrectly
removed it upon a failure of the operation.
* jk/abort-clone-with-existing-dest:
clone: do not clean up directories we didn't create
clone: factor out dir_exists() helper
t5600: modernize style
t5600: fix outdated comment about unborn HEAD
"git merge -Xours/-Xtheirs" learned to use our/their version when
resolving a conflicting updates to a symbolic link.
* jc/merge-symlink-ours-theirs:
merge: teach -Xours/-Xtheirs to symbolic link merge
API clean-up around revision traversal.
* rs/lose-leak-pending:
commit: remove unused function clear_commit_marks_for_object_array()
revision: remove the unused flag leak_pending
checkout: avoid using the rev_info flag leak_pending
bundle: avoid using the rev_info flag leak_pending
bisect: avoid using the rev_info flag leak_pending
object: add clear_commit_marks_all()
ref-filter: use clear_commit_marks_many() in do_merge_filter()
commit: use clear_commit_marks_many() in remove_redundant()
commit: avoid allocation in clear_commit_marks_many()
"git svn dcommit" did not take into account the fact that a
svn+ssh:// URL with a username@ (typically used for pushing) refers
to the same SVN repository without the username@ and failed when
svn.pushmergeinfo option is set.
* jm/svn-pushmergeinfo-fix:
git-svn: fix svn.pushmergeinfo handling of svn+ssh usernames.
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
An old regression in "git describe --all $annotated_tag^0" has been
fixed.
* dk/describe-all-output-fix:
describe: prepend "tags/" when describing tags with embedded name
Use the helper macro MOVE_ARRAY to move arrays. This is shorter and
safer, as it automatically infers the size of elements.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci in
Travis CI's static analysis build job.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently introduced regression caused a segfault at clone time on
case-insensitive filesystems when filenames differing only in case are
present. This bug has already been fixed (repository: pre-initialize
hash algo pointer, 2018-01-18), but it's not the first time similar
problems have arisen. Therefore, introduce a test to catch this case and
protect against future regressions.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are various git subcommands (among them, clone) which don't set up
the repository (that is, they lack RUN_SETUP or RUN_SETUP_GENTLY) but
end up needing to have information about the hash algorithm in use.
Because the hash algorithm is part of struct repository and it's only
initialized in repository setup, we can end up dereferencing a NULL
pointer in some cases if we call one of these subcommands and look up
the empty blob or empty tree values.
A "git clone" of a project that has two paths that differ only in
case suffers from this if it is run on a case insensitive platform.
When the command attempts to check out one of these two paths after
checking out the other one, the checkout codepath needs to see if
the version that is already on the filesystem (which should not
happen if the FS were case sensitive) is dirty, and it needs to
exercise the hashing code at that point.
In the future, we can add a command line option for this or read it
from the configuration, but until we're ready to expose that
functionality to the user, simply initialize the repository
structure to use the current hash algorithm, SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running git clone --single-branch --mirror -b TAGNAME previously
triggered the following error message:
fatal: multiple updates for ref 'refs/tags/TAGNAME' not allowed.
This error condition is handled in files_initial_transaction_commit().
42c7f7ff9 ("commit_packed_refs(): remove call to `packed_refs_unlock()`", 2017-06-23)
introduced incorrect unlocking in the error path of this function,
which changes the error message to
fatal: BUG: packed_refs_unlock() called when not locked
Move the call to packed_refs_unlock() above the "cleanup:" label
since the unlocking should only be done in the last error path.
Signed-off-by: Mathias Rav <m@git.strova.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As sha1_file_name() could be performance sensitive, let's
make it faster by using strbuf_addstr() and strbuf_addc()
instead of strbuf_addf().
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_TRACE_CURL provides a way to debug what is being sent and received
over HTTP, with automatic redaction of sensitive information. But it
also logs data transmissions, which significantly increases the log file
size, sometimes unnecessarily. Add an option "GIT_TRACE_CURL_NO_DATA" to
allow the user to omit such data transmissions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using GIT_TRACE_CURL, Git already redacts the "Authorization:" and
"Proxy-Authorization:" HTTP headers. Extend this redaction to a
user-specified list of cookies, specified through the
"GIT_REDACT_COOKIES" environment variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a rule in strbuf.cocci for converting trivial uses of
strbuf_addf() to strbuf_addstr() in order to simplify the code and
improve performance a bit. Coccinelle 1.0.0~rc19.deb-3 on Travis CI
lets the "%s" in that rule match format strings like "%d" as well for
some reason, though, leading to invalid proposed patches.
Use the "format" keyword to let Coccinelle parse the format string and
match the conversion specifier with a trivial regular expression
instead. This works fine with both Coccinelle 1.0.0~rc19.deb-3 and
1.0.4.deb-3+b3 (the current version on Debian testing).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-index version 2 format uses two 4-byte integers in
network-byte order to represent one 8-byte value. The current
implementation has several code clones for stitching these integers
together.
Use get_be64() to create an 8-byte integer from two 4-byte integers
represented this way.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a command sets a new env variable GIT_DIR=.git, we need more context
to know where that '.git' is related to.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Occasionally submodule code could execute new commands with GIT_DIR set
to some submodule. GIT_TRACE prints just the command line which makes it
hard to tell that it's not really executed on this repository.
Print the env delta (compared to parent environment) in this case.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We normally print full command line, including the program and its
argument. When git_cmd is set, we have a special code path to run the
right "git" program and child_process.argv[0] will not contain the
program name anymore. As a result, we print just the command
arguments.
I thought it was a regression when the code was refactored and git_cmd
added, but apparently it's not. git_cmd mode was introduced before
tracing was added in 8852f5d704 (run_command(): respect GIT_TRACE -
2008-07-07) so it's more like an oversight in 8852f5d704.
Fix it, print the program name "git" in git_cmd mode. It's nice to have
now. But it will be more important later when we start to print env
variables too, in shell syntax. The lack of a program name would look
confusing then.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the same as the old code that uses trace_argv_printf() in
run-command.c. This function will be improved in later patches to
print more information from struct child_process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split index mode only has a few dedicated tests, but as the index is
involved in nearly every git operation, this doesn't quite cover all the
ways repositories with split index can break. To use split index mode
throughout the test suite a GIT_TEST_SPLIT_INDEX environment variable
can be set, which makes git split the index at random and thus
excercises the functionality much more thoroughly.
As this is not turned on by default, it is not executed nearly as often
as the test suite is run, so occationally breakages slip through. Try
to counteract that by running the test suite with GIT_TEST_SPLIT_INDEX
mode turned on on travis.
To avoid using too many cycles on travis only run split index mode in
the linux-gcc target only. The Linux build was chosen over the Mac OS
builds because it tends to be much faster to complete.
The linux gcc build was chosen over the linux clang build because the
linux clang build is the fastest build, so it can serve as an early
indicator if something is broken and we want to avoid spending the extra
cycles of running the test suite twice for that.
Helped-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
