"git add -p" while the index is unmerged sometimes failed to parse
the diff output it internally produces and died, which has been
corrected.
* jk/add-p-unmerged-fix:
add-patch: handle "* Unmerged path" lines
The code to parse "git rebase -X<opt>" was not prepared to see an
unparsable option string, which has been corrected.
* ab/fix-strategy-opts-parsing:
sequencer.c: fix overflow & segfault in parse_strategy_opts()
"git format-patch" learned to write a log-message only output file
for empty commits.
* jk/format-patch-change-format-for-empty-commits:
format-patch: output header for empty commits
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
A few subcommands have been taught to stop users from working on a
branch that is being used in another worktree linked to the same
repository.
* rj/avoid-switching-to-already-used-branch:
switch: reject if the branch is already checked out elsewhere (test)
rebase: refuse to switch to a branch already checked out elsewhere (test)
branch: fix die_if_checked_out() when ignore_current_worktree
worktree: introduce is_shared_symref()
Allow "git bisect reset" to check out the original branch when the
branch is already checked out in a different worktree linked to the
same repository.
* rj/bisect-already-used-branch:
bisect: fix "reset" when branch is checked out elsewhere
"git push" has been taught to allow deletion of refs with one-level
names to help repairing a repository who acquired such a ref by
mistake. In general, we don't encourage use of such a ref, and
creation or update to such a ref is rejected as before.
* zh/push-to-delete-onelevel-ref:
push: allow delete single-level ref
receive-pack: fix funny ref error messsage
"git restore" supports options like "--ours" that are only
meaningful during a conflicted merge, but these options are only
meaningful when updating the working tree files. These options are
marked to be incompatible when both "--staged" and "--worktree" are
in effect.
* ak/restore-both-incompatible-with-conflicts:
restore: fault --staged --worktree with merge opts
There's code in git_connect() that checks whether we are doing a push
with protocol_v2, and if so, drops us to protocol_v0 (since we know
how to do v2 only for fetches). But it misses some corner cases:
1. it checks the "prog" variable, which is actually the path to
receive-pack on the remote side. By default this is just
"git-receive-pack", but it could be an arbitrary string (like
"/path/to/git receive-pack", etc). We'd accidentally stay in v2
mode in this case.
2. besides "receive-pack" and "upload-pack", there's one other value
we'd expect: "upload-archive" for handling "git archive --remote".
Like receive-pack, this doesn't understand v2, and should use the
v0 protocol.
In practice, neither of these causes bugs in the real world so far. We
do send a "we understand v2" probe to the server, but since no server
implements v2 for anything but upload-pack, it's simply ignored. But
this would eventually become a problem if we do implement v2 for those
endpoints, as older clients would falsely claim to understand it,
leading to a server response they can't parse.
We can fix (1) by passing in both the program path and the "name" of the
operation. I treat the name as a string here, because that's the pattern
set in transport_connect(), which is one of our callers (we were simply
throwing away the "name" value there before).
We can fix (2) by allowing only known-v2 protocols ("upload-pack"),
rather than blocking unknown ones ("receive-pack" and "upload-archive").
That will mean whoever eventually implements v2 push will have to adjust
this list, but that's reasonable. We'll do the safe, conservative thing
(sticking to v0) by default, and anybody working on v2 will quickly
realize this spot needs to be updated.
The new tests cover the receive-pack and upload-archive cases above, and
re-confirm that we allow v2 with an arbitrary "--upload-pack" path (that
already worked before this patch, of course, but it would be an easy
thing to break if we flipped the allow/block logic without also handling
"name" separately).
Here are a few miscellaneous implementation notes, since I had to do a
little head-scratching to understand who calls what:
- transport_connect() is called only for git-upload-archive. For
non-http git remotes, that resolves to the virtual connect_git()
function (which then calls git_connect(); confused yet?). So
plumbing through "name" in connect_git() covers that.
- for regular fetches and pushes, callers use higher-level functions
like transport_fetch_refs(). For non-http git remotes, that means
calling git_connect() under the hood via connect_setup(). And that
uses the "for_push" flag to decide which name to use.
- likewise, plumbing like fetch-pack and send-pack may call
git_connect() directly; they each know which name to use.
- for remote helpers (including http), we already have separate
parameters for "name" and "exec" (another name for "prog"). In
process_connect_service(), we feed the "name" to the helper via
"connect" or "stateless-connect" directives.
There's also a "servpath" option, which can be used to tell the
helper about the "exec" path. But no helpers we implement support
it! For http it would be useless anyway (no reasonable server
implementation will allow you to send a shell command to run the
server). In theory it would be useful for more obscure helpers like
remote-ext, but even there it is not implemented.
It's tempting to get rid of it simply to reduce confusion, but we
have publicly documented it since it was added in fa8c097cc9
(Support remote helpers implementing smart transports, 2009-12-09),
so it's possible some helper in the wild is using it.
- So for v2, helpers (again, including http) are mainly used via
stateless-connect, driven by the main program. But they do still
need to decide whether to do a v2 probe. And so there's similar
logic in remote-curl.c's discover_refs() that looks for
"git-receive-pack". But it's not buggy in the same way. Since it
doesn't support servpath, it is always dealing with a "service"
string like "git-receive-pack". And since it doesn't support
straight "connect", it can't be used for "upload-archive".
So we could leave that spot alone. But I've updated it here to match
the logic we're changing in connect_git(). That seems like the least
confusing thing for somebody who has to touch both of these spots
later (say, to add v2 push support). I didn't add a new test to make
sure this doesn't break anything; we already have several tests (in
t5551 and elsewhere) that make sure we are using v2 over http.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new "fetch.hideRefs" option can be used to exclude specified refs
from "rev-list --objects --stdin --not --all" traversal for
checking object connectivity, most useful when there are many
unrelated histories in a single repository.
* ew/fetch-hiderefs:
fetch: support hideRefs to speed up connectivity checks
Allow information carried on the WWW-AUthenticate header to be
passed to the credential helpers.
* mc/credential-helper-www-authenticate:
credential: add WWW-Authenticate header to cred requests
http: read HTTP WWW-Authenticate response headers
t5563: add tests for basic and anoymous HTTP access
Instead of forcing each command to choose to honor GPG related
configuration variables, make the subsystem lazily initialize
itself.
* jc/gpg-lazy-init:
drop pure pass-through config callbacks
gpg-interface: lazily initialize and read the configuration
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
Code clean-up to clarify directory traversal API.
* en/dir-api-cleanup:
unpack-trees: add usage notices around df_conflict_entry
unpack-trees: special case read-tree debugging as internal usage
unpack-trees: rewrap a few overlong lines from previous patch
unpack-trees: mark fields only used internally as internal
unpack_trees: start splitting internal fields from public API
sparse-checkout: avoid using internal API of unpack-trees, take 2
sparse-checkout: avoid using internal API of unpack-trees
unpack-trees: clean up some flow control
dir: mark output only fields of dir_struct as such
dir: add a usage note to exclude_per_dir
dir: separate public from internal portion of dir_struct
unpack-trees: heed requests to overwrite ignored files
t2021: fix platform-specific leftover cruft
"git fsck" learned to check the index files in other worktrees,
just like "git gc" honors them as anchoring points.
* jk/fsck-indices-in-worktrees:
fsck: check even zero-entry index files
fsck: mention file path for index errors
fsck: check index files in all worktrees
fsck: factor out index fsck
When the prompt command mode was introduced in 1bfc51ac81 (Allow
__git_ps1 to be used in PROMPT_COMMAND, 2012-10-10), the assumption was
that it was necessary in order to properly add colors to PS1 in bash,
but this wasn't true.
It's true that the \[ \] markers add the information needed to properly
calculate the width of the prompt, and they have to be added directly to
PS1, a function returning them doesn't work.
But that is because bash coverts the \[ \] markers in PS1 to \001 \002,
which is what readline ultimately needs in order to calculate the width.
We don't need bash to do this conversion, we can use \001 \002
ourselves, and then the prompt command mode is not necessary to display
colors.
This is what functions returning colors are supposed to do [1].
[1] http://mywiki.wooledge.org/BashFAQ/053
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Tested-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently `git rev-parse --quiet @{u}` is not actually quiet when
upstream isn't configured:
fatal: no upstream configured for branch 'foo'
Make it so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug introduced with the "--format" option in
ce74de93 (ls-files: introduce "--format" option, 2022-07-23),
where relative paths were computed using the output buffer,
which could lead to random garbage data in the output.
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the list of files as input was implemented in 6508eedf67
(t/aggregate-results: accomodate systems with small max argument list
length, 2010-06-01), a much simpler solution wasn't considered.
Let's just pass the directory as an argument.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems a user would expect this option would work regardless
of whether it's fetching from a single remote, many remotes,
or recursing into submodules.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we generate a diff with --cached, unmerged entries have no oid for
their index entry:
$ git diff-index --abbrev --cached HEAD
:100644 000000 f719efd 0000000 U my-conflict
So when we are asked to produce a patch, since we only have one side, we
just emit a special message:
$ git diff-index --cached -p HEAD
* Unmerged path my-conflict
This confuses interactive-patch modes that look at cached diffs. For
example:
$ git reset -p
BUG: add-patch.c:498: diff starts with unexpected line:
* Unmerged path my-conflict
Making things even more confusing, you'll get that error only if the
unmerged entry is alphabetically the first changed file. Otherwise, we
simply stick the unrecognized line to the end of the previous hunk.
There it's mostly harmless, as it eventually gets fed back to "git
apply", which happily ignores it. But it's still shown to the user
attached to the hunk, which is wrong.
So let's handle these lines as a noop. There's not really anything
useful to do with a conflicted merge in this case, and that's what we do
for other cases like "add -p". There we get a "diff --cc" line, which we
accept as starting a new file, but we refuse to use any of its hunks
(their headers start with "@@@" and not "@@ ", so we silently ignore
them).
It seems like simply recognizing the line and continuing in our parsing
loop would work. But we actually need to run the rest of the loop body
to handle matching up our colored/filtered output. But that code assumes
that we have some active file_diff we're working on. So instead, we'll
just insert a dummy entry into our array. This ends up the same as if we
saw a "diff --cc" line (a file with no hunks).
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit dropped support for diff.noprefix in format-patch.
While this will do the right thing in most cases (where sending patches
without a prefix was an accidental side effect of the sender preferring
to see their local patches without prefixes), it left no good option for
a project or workflow where you really do want to send patches without
prefixes. You'd be stuck using "--no-prefix" for every invocation.
So let's add a config option specific to format-patch that enables this
behavior. That gives people who have such a workflow a way to get what
they want, but makes it hard to accidentally trigger it.
A more backwards-compatible way of doing the transition would be to have
format.noprefix default to diff.noprefix when it's not set. But that
doesn't really help the "accidental" problem; people would have to
manually set format.noprefix=false. And it's unlikely that anybody
really wants format.noprefix=true in the first place. I'm adding it here
mostly as an escape hatch, not because anybody has expressed any
interest in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of format-patch respects diff.noprefix, but this usually ends
up being a hassle for people receiving the patch, as they have to
manually specify "-p0" in order to apply it.
I don't think there was any specific intention for it to behave this
way. The noprefix option is handled by git_diff_ui_config(), and
format-patch exists in a gray area between plumbing and porcelain.
People do look at the output, and we'd expect it to colorize things,
respect their choice of algorithm, and so on. But this particular option
creates problems for the receiver (in theory so does diff.mnemonicprefix,
but since we are always formatting commits, the mnemonic prefixes will
always be "a/" and "b/").
So let's disable it. The slight downsides are:
- people who have set diff.noprefix presumably like to see their
patches without prefixes. If they use format-patch to review their
series, they'll see prefixes. On the other hand, it is probably a
good idea for them to look at what will actually get sent out.
We could try to play games here with "is stdout a tty", as we do for
color. But that's not a completely reliable signal, and it's
probably not worth the trouble. If you want to see the patch with
the usual bells and whistles, then you are better off using "git
log" or "git show".
- if a project really does have a workflow that likes prefix-less
patches, and the receiver is prepared to use "-p0", then the sender
now has to manually say "--no-prefix" for each format-patch
invocation. That doesn't seem _too_ terrible given that the receiver
has to manually say "-p0" for each git-am invocation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can change the output of prefixes with diff.noprefix and
diff.mnemonicprefix, but there's no easy way to override them from the
command-line. We do have "--no-prefix", but there's no way to get back
to the default prefix. So let's add an option to do that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't have any specific test coverage of diff's various prefix
options. We do incidentally invoke them in a few places, but it's worth
having a more thorough set of tests that covers all of the effects we
expect to see, and that the options kick in at the appropriate times.
This will be especially useful as the next patch adds more options.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The split_cmdline() function introduced in [1] returns an "int". If
it's negative it signifies an error. The option parsing in [2] didn't
account for this, and assigned the value directly to the "size_t
xopts_nr". We'd then attempt to loop over all of these elements, and
access uninitialized memory.
There's a few things that use this for option parsing, but one way to
trigger it is with a bad value to "-X <strategy-option>", e.g:
git rebase -X"bad argument\""
In another context this might be a security issue, but in this case
someone who's already able to inject arguments directly to our
commands would be past other defenses, making this potential
escalation a moot point.
As the example above & test case shows the error reporting leaves
something to be desired. The function will loop over the
whitespace-split values, but when it encounters an error we'll only
report the first element, which is OK, not the second "argument\""
whose quote is unbalanced.
This is an inherent limitation of the current API, and the issue
affects other API users. Let's not attempt to fix that now. If and
when that happens these tests will need to be adjusted to assert the
new output.
1. 2b11e3170e (If you have a config containing something like this:,
2006-06-05)
2. ca6c6b45dd (sequencer (rebase -i): respect strategy/strategy_opts
settings, 2017-01-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling OPT_FILENAME(), we have to stick the "prefix" (if any) in
front of the filename to make up for the fact that Git has chdir()'d to
the top of the repository. We can do this with prefix_filename(), but
there are a few special cases we handle ourselves.
Unfortunately the memory allocation is inconsistent here; if we do make
it to prefix_filename(), we'll allocate a string which the caller must
free to avoid a leak. But if we hit our special cases, we'll return the
string as-is, and a caller which tries to free it will crash. So there's
no way to win.
Let's consistently allocate, so that callers can do the right thing.
There are now three cases to care about in the function (and hence a
three-armed if/else):
1. we got a NULL input (and should leave it as NULL, though arguably
this is the sign of a bug; let's keep the status quo for now and we
can pick at that scab later)
2. we hit a special case that means we leave the name intact; we
should duplicate the string. This includes our special "-"
matching. Prior to this patch, it also included empty prefixes and
absolute filenames. But we can observe that prefix_filename()
already handles these, so we don't need to detect them.
3. everything else goes to prefix_filename()
I've dropped the "const" from the "char **file" parameter to indicate
that we're allocating, though in practice it's not really important.
This is all being shuffled through a void pointer via opt->value before
it hits code which ever looks at the string. And it's even a bit weird,
because we are really taking _in_ a const string and using the same
out-parameter for a non-const string. A better function signature would
be:
static char *fix_filename(const char *prefix, const char *file);
but that would mean the caller dereferences the double-pointer (and the
NULL check is currently handled inside this function). So I took the
path of least-change here.
Note that we have to fix several callers in this commit, too, or we'll
break the leak-checking tests. These are "new" leaks in the sense that
they are now triggered by the test suite, but these spots have always
been leaky when Git is run in a subdirectory of the repository. I fixed
all of the cases that trigger with GIT_TEST_PASSING_SANITIZE_LEAK. There
may be others in scripts that have other leaks, but we can fix them
later along with those other leaks (and again, you _couldn't_ fix them
before this patch, so this is the necessary first step).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user can specify a filename to a command from the command line,
either as the value given to a command line option, or a command
line argument. When it is given as a relative filename, in the
user's mind, it is relative to the directory "git" was started from,
but by the time the filename is used, "git" would almost always have
chdir()'ed up to the root level of the working tree.
The given filename, if it is relative, needs to be prefixed with the
path to the current directory, and it typically is done by calling
prefix_filename() helper function. For commands that can also take
"-" to use the standard input or the standard output, however, this
needs to be done with care.
"git bundle create" uses the next word on the command line as the
output filename, and can take "-" to mean "write to the standard
output". It blindly called prefix_filename(), so running it in a
subdirectory did not quite work as expected.
Introduce a new helper, prefix_filename_except_for_dash(), and use
it to help "git bundle create" codepath.
Reported-by: Michael Henry
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For writing, "bundle create -" indicates that the bundle should be
written to stdout. But there's no matching handling of "-" for reading
operations. This is inconsistent, and a little inflexible (though one
can always use "/dev/stdin" on systems that support it).
However, it's easy to change. Once upon a time, the bundle-reading code
required a seekable descriptor, but that was fixed long ago in
e9ee84cf28 (bundle: allowing to read from an unseekable fd,
2011-10-13). So we just need to handle "-" explicitly when opening the
file.
We _could_ do this by handling "-" in read_bundle_header(), which the
reading functions all call already. But that is probably a bad idea.
It's also used by low-level code like the transport functions, and we
may want to be more careful there. We do not know that stdin is even
available to us, and certainly we would not want to get confused by a
configured URL that happens to point to "-".
So instead, let's add a helper to builtin/bundle.c. Since both the
bundle code and some of the callers refer to the bundle by name for
error messages, let's use the string "<stdin>" to make the output a bit
nicer to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 79862b6b77 (bundle-create: progress output control, 2019-11-10),
"bundle create" learned about the --all-progress and
--all-progress-implied options, which were copied from pack-objects.
I think these were a mistake.
In pack-objects, "all-progress-implied" is about switching the behavior
between a regular on-disk "git repack" and the use of pack-objects for
push/fetch (where a fetch does not want progress from the server during
the write stage; the client will print progress as it receives the
data). But there's no such distinction for bundles. Prior to
79862b6b77, we always printed the write stage. Afterwards, a vanilla:
git bundle create foo.bundle
omits the write progress, appearing to hang (especially if your
repository is large or your disk is slow). That seems like a regression.
It's possible that the flexibility to disable the write-phase progress
_could_ be useful for bundle. E.g., if you did something like:
ssh some-host git bundle create foo.bundle |
git bundle unbundle
But if you are running both in real-time, why are you using bundles in
the first place? You're better off doing a real fetch.
But even if we did want to support that, it should be the exception, and
vanilla "bundle create" should display the full progress. So we'd want
to name the option "--no-write-progress" or something.
The "--all-progress" option itself is even worse. It exists in
pack-objects only for historical reasons. It's a mistake because it
implies "--progress", and we added "--all-progress-implied" to fix that.
There is no reason to propagate that mistake to new commands.
Likewise, the documentation for these options was pulled from
pack-objects. But it doesn't make any sense in this context. It talks
about "--stdout", but that is not even an option that git-bundle
supports.
This patch flips the default for "--all-progress-implied" back to
"true", fixing the regression in 79862b6b77. This turns that option
into a noop, and means that "--all-progress" is really the same as
"--progress". We _could_ drop them completely, but since they've been
shipped with Git since v2.25.0, it's polite to continue accepting them.
I didn't implement any sort of "--no-write-progress" here. I'm not at
all convinced it's necessary, and the discussion from the original
thread:
https://lore.kernel.org/git/20191110204126.30553-2-robbat2@gentoo.org/
shows that that the main focus was on getting --progress and --quiet
support, and not any kind of clever "real-time bundle over the network"
feature. But technically this patch is making it impossible to do
something that you _could_ do post-79862b6b77c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting an empty commit, it is surprising that a totally empty
file is generated. Set the flag to always print the header, matching
the behaviour of git-log.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We discourage the creation/update of single-level refs
because some upper-layer applications only work in specified
reference namespaces, such as "refs/heads/*" or "refs/tags/*",
these single-level refnames may not be recognized. However,
we still hope users can delete them which have been created
by mistake.
Therefore, when updating branches on the server with
"git receive-pack", by checking whether it is a branch deletion
operation, it will determine whether to allow the update of
a single-level refs. This avoids creating/updating such
single-level refs, but allows them to be deleted.
On the client side, "git push" also does not properly fill in
the old-oid of single-level refs, which causes the server-side
"git receive-pack" to think that the ref's old-oid has changed
when deleting single-level refs, this causes the push to be
rejected. So the solution is to fix the client to be able to
delete single-level refs by properly filling old-oid.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes to code that parses the todo file used in "rebase -i".
* pw/rebase-i-parse-fix:
rebase -i: fix parsing of "fixup -C<commit>"
rebase -i: match whole word in is_command()
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
Add the value of the WWW-Authenticate response header to credential
requests. Credential helpers that understand and support HTTP
authentication and authorization can use this standard header (RFC 2616
Section 14.47 [1]) to generate valid credentials.
WWW-Authenticate headers can contain information pertaining to the
authority, authentication mechanism, or extra parameters/scopes that are
required.
The current I/O format for credential helpers only allows for unique
names for properties/attributes, so in order to transmit multiple header
values (with a specific order) we introduce a new convention whereby a
C-style array syntax is used in the property name to denote multiple
ordered values for the same property.
In this case we send multiple `wwwauth[]` properties where the order
that the repeated attributes appear in the conversation reflects the
order that the WWW-Authenticate headers appeared in the HTTP response.
Add a set of tests to exercise the HTTP authentication header parsing
and the interop with credential helpers. Credential helpers will receive
WWW-Authenticate information in credential requests.
[1] https://datatracker.ietf.org/doc/html/rfc2616#section-14.47
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test showing simple anoymous HTTP access to an unprotected
repository, that results in no credential helper invocations.
Also add a test demonstrating simple basic authentication with
simple credential helper support.
Leverage a no-parsed headers (NPH) CGI script so that we can directly
control the HTTP responses to simulate a multitude of good, bad and ugly
remote server implementations around auth.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format.attach configuration variable lacked a way to override a
value defined in a lower-priority configuration file (e.g. the
system one) by redefining it in a higher-priority configuration
file. Now, setting format.attach to an empty string means show the
patch inline in the e-mail message, without using MIME attachment.
This is a backward incompatible change.
* jc/countermand-format-attach:
format.attach: allow empty value to disable multi-part messages
sscanf(3) used in "git symbolic-ref --short" implementation found
to be not working reliably on macOS in UTF-8 locales. Rewrite the
code to avoid sscanf() altogether to work it around.
* jk/shorten-unambiguous-ref-wo-sscanf:
shorten_unambiguous_ref(): avoid sscanf()
shorten_unambiguous_ref(): use NUM_REV_PARSE_RULES constant
shorten_unambiguous_ref(): avoid integer truncation
The credential subsystem learned that a password may have an
explicit expiration.
* mh/credential-password-expiry:
credential: new attribute password_expiry_utc
"git archive HEAD^{tree}" records the paths with the current
timestamp in the archive, making it harder to obtain a stable
output. The command learned the --mtime option to specify an
arbitrary timestamp (e.g. --mtime="@0 +0000" for the epoch).
* rs/archive-mtime:
archive: add --mtime
Remove leftover and unused code.
* tb/drop-dir-iterator-follow-symlink-bit:
t0066: drop setup of "dir5"
dir-iterator: drop unused `DIR_ITERATOR_FOLLOW_SYMLINKS`
The "diff" drivers specified by the "diff" attribute attached to
paths can now specify which algorithm (e.g. histogram) to use.
* jc/diff-algo-attribute:
diff: teach diff to read algorithm from diff driver
diff: consolidate diff algorithm option parsing
An invalid label or ref in the "rebase -i" todo file used to
trigger an runtime error. SUch an error is now diagnosed while the
todo file is parsed.
* pw/rebase-i-validate-labels-early:
rebase -i: check labels and refs when parsing todo list
The 'restore' command already rejects the --merge, --conflict, --ours
and --theirs options when combined with --staged, but accepts them when
--worktree is added as well.
Unfortunately that doesn't appear to do anything useful. The --ours and
--theirs options seem to be ignored when both --staged and --worktree
are given, whereas with --merge or --conflict, the command has the same
effect as if the --staged option wasn't present.
So reject those options with '--staged --worktree' as well, using
opts->accept_ref to distinguish restore from checkout.
Add test for both '--staged' and '--staged --worktree'.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
git -c fetch.hideRefs=refs \
-c fetch.hideRefs='!refs/remotes/$REMOTE/' \
fetch $REMOTE
[1] `git rev-list --objects --stdin --not --all --quiet --alternate-refs'
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a comment describing how each test file should start was added in
commit [1], it was the second comment of t/test-lib.sh. The comment
describes how variable "test_description" is supposed to be assigned at
the top of each test file and how "test-lib.sh" should be used by
sourcing it. However, even in [1], the comment was ten lines away from
the usage of the variable by test-lib.sh. Since then, the comment has
drifted away both from the top of the file and from the usage of the
variable. The comment just sits in the middle of the initialization of
the test library, surrounded by unrelated code, almost one hundred lines
away from the usage of "test_description".
Nobody has noticed this drift during evolution of test-lib.sh, which
suggests that this comment has outlived its usefulness. The assignment
of "test_description", sourcing of "test-lib.sh" by tests, and the
process of writing tests in general are described in detail in
"t/README". So drop the obsolete comment.
An alternative solution could be to move the comment either to the top
of the file, or down to the usage of variable "test_description".
[1] e1970ce43a ("[PATCH 1/2] Test framework take two.", 2005-05-13)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a directory exists but has only ignored files within it and we are
trying to switch to a branch that has a file where that directory is,
the behavior depends upon --[no]-overwrite-ignore. If the user wants to
--overwrite-ignore (the default), then we should delete the ignored file
and directory and switch to the new branch.
The code to handle this in verify_clean_subdirectory() in unpack-trees
tried to handle this via paying attention to the exclude_per_dir setting
of the internal dir field. This came from commit c81935348b ("Fix
switching to a branch with D/F when current branch has file D.",
2007-03-15), which pre-dated 039bc64e88 ("core.excludesfile clean-up",
2007-11-14), and thus did not pay attention to ignore patterns from
other relevant files. Change it to use setup_standard_excludes() so
that it is also aware of excludes specified in other locations.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2021.6 existed to test the status of a symlink that was left around by
previous tests. It tried to also clean up the symlink after it was done
so that subsequent tests wouldn't be tripped up by it. Unfortunately,
since this test had a SYMLINK prerequisite, that made the cleanup
platform dependent...and made a testcase I was trying to add to this
testsuite fail (that testcase will be included in the next patch).
Before we go and add new testcases, fix this cleanup by moving it into a
separate test.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5883034 (checkout: reject if the branch is already checked out
elsewhere) in normal use, we do not allow multiple worktrees having the
same checked out branch.
A bug has recently been fixed that caused this to not work as expected.
Let's add a test to notice if this changes in the future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b5cabb4a9 (rebase: refuse to switch to branch already checked out
elsewhere, 2020-02-23) we add a condition to prevent a rebase operation
involving a switch to a branch that is already checked out in another
worktree.
A bug has recently been fixed that caused this to not work as expected.
Let's add a test to notice if this changes in the future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The style of t9700-perl-git.sh is old. There are 3 problems:
* A title is not on the same line with test_expect_success command.
* A test body is indented by whitespaces.
* There are whitespaces after redirect operators.
Modernize test scripts by:
* Combine the title with test_expect_success command.
* Replace whitespace indents with TAB.
* Delete whitespaces after redirect operators.
Signed-off-by: Zhang Yi <18994118902@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --jobs=0" used to hit a BUG(), which has been corrected
to use the available CPUs.
* ma/fetch-parallel-use-online-cpus:
fetch: choose a sensible default with --jobs=0 again
A test helper had a single write(2) of 256kB, which was too big for
some platforms (e.g. NonStop), which has been corrected by using
xwrite() wrapper appropriately.
* jc/genzeros-avoid-raw-write:
test-genzeros: avoid raw write(2)
Error messages given upon a signature verification failure used to
discard the errors from underlying gpg program, which has been
corrected.
* js/gpg-errors:
gpg: do show gpg's error message upon failure
t7510: add a test case that does not need gpg
If we encounter an error in an index file, we may say something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo
But if you have multiple worktrees, each with its own index, it can be
very helpful to know which file had the problem. So let's pass that path
down through the various index-fsck functions and use it where
appropriate. After this patch you should get something like:
error: 1234abcd: invalid sha1 pointer in resolve-undo of .git/worktrees/wt/index
That's a bit verbose, but since the point is that you shouldn't see this
normally, we're better to err on the side of more details.
I've also added the index filename to the name used by "fsck
--name-objects", which will show up if we find the object to be missing,
etc. This is bending the rules a little there, as the option claims to
write names that can be fed to rev-parse. But there is no revision
syntax to access the index of another worktree, so the best we can do is
make up something that a human will probably understand.
I did take care to retain the existing ":file" syntax for the current
worktree. So the uglier output should kick in only when it's actually
necessary. See the included tests for examples of both forms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the index file for the main worktree, but completely ignore the
index files in other worktrees. These should be checked, too, as they
are part of the repository state (and in particular, errors in those
index files may cause repo-wide operations like "git gc" to complain).
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our parallel process API takes several callbacks via function pointers
in the run_process_paralell_opts struct. Not every callback needs every
parameter; let's mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prio_queue_compare_fn interface has a void pointer to allow callers
to pass arbitrary data, but most comparison functions don't need it.
Mark those cases to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Things should be able to depend on object.h without pulling in all of
cache.h. Move an enum to allow this.
Note that a couple files previously depended on things brought in
through cache.h indirectly (revision.h -> commit.h -> object.h ->
cache.h). As such, this change requires making existing dependencies
more explicit in half a dozen files. The inclusion of strbuf.h in
some headers if of particular note: these headers directly embedded a
strbuf in some new structs, meaning they should have been including
strbuf.h all along but were indirectly getting the necessary
definitions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These defines and enum are all oid-related and as such seem to make
more sense being included in hash.h. Further, moving them there
allows us to remove some includes of cache.h in other files.
The change to line-log.h might look unrelated, but line-log.h includes
diffcore.h, which previously included cache.h, which included the
kitchen sink. Since this patch makes diffcore.h no longer include
cache.h, the compiler complains about the 'struct string_list *'
function parameter. Add a forward declaration for struct string_list to
address this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had several C files include cache.h unnecessarily. Replace those
with an include of "git-compat-util.h" instead. Much like the previous
commit, these have all been verified via both ensuring that
gcc -E $SOURCE_FILE | grep '"cache.h"'
found no hits and that
make DEVELOPER=1 ${OBJECT_FILE_FOR_SOURCE_FILE}
successfully compiles without warnings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user omits the space between "-C" and the commit in a fixup
command then it is parsed as an ordinary fixup and the commit message is
not updated as it should be. Fix this by making the space between "-C"
and "<commit>" optional as it is for the "merge" command.
Note that set_replace_editor() is changed to set $GIT_SEQUENCE_EDITOR
instead of $EDITOR in order to be able to replace the todo list and
reword commits with $FAKE_COMMIT_MESSAGE. This is safe as all the
existing users are using set_replace_editor() to replace the todo list.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When matching an unabbreviated command is_command() only does a prefix
match which means it parses "pickled" as TODO_PICK. parse_insn_line()
does error out because is_command() only advances as far as the end of
"pick" so it looks like the command name is not followed by a space but
the error message is "missing arguments for pick" rather than telling
the user that the "pickled" is not a valid command.
Fix this by ensuring the match is follow by whitespace or the end of the
string as we already do for abbreviated commands. The (*bol = p) at the
end of the condition is a bit cute for my taste but I decided to leave
it be for now. Rather than add new tests the existing tests for bad
commands are adapted to use a bad command name that triggers the prefix
matching bug.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of t5559 is run the regular t5551 tests with HTTP/2. But it
does so with the "h2c" protocol, which uses cleartext upgrades from
HTTP/1.1 to HTTP/2 (rather than learning about HTTP/2 support during the
TLS negotiation).
This has a few problems:
- it's not very indicative of the real world. In practice, most servers
that support HTTP/2 will also support TLS.
- support for upgrading does not seem as robust. In particular, we've
run into bugs in some versions of Apache's mod_http2 that trigger
only with the upgrade mode. See:
https://lore.kernel.org/git/Y8ztIqYgVCPILJlO@coredump.intra.peff.net/
So the upside is that this change makes our HTTP/2 tests more robust and
more realistic. The downside is that if we can't set up SSL for any
reason, we'll skip the tests (even though you _might_ have been able to
run the HTTP/2 tests the old way). We could probably have a conditional
fallback, but it would be complicated for little gain, and it's not even
clear it would help (i.e., would any test environment even have HTTP/2
but not SSL support?).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test needs to be tweaked in order for t5559 to pass with SSL/TLS set
up. When we make our initial clone, we check that the curl trace of
requests is what we expected. But we need to fix two things:
- along with ignoring "data" lines from the trace, we need to ignore
"SSL data" lines
- when TLS is used, the server is able to tell the client (via ALPN)
that it supports HTTP/2 before the first HTTP request is made. So
rather than request an upgrade using an HTTP header, it can just
speak HTTP/2 immediately
With this patch, running:
LIB_HTTPD_SSL=1 ./t5559-http-fetch-smart-http2.sh
works, whereas it did not before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 73c49a4474 (t: run t5551 tests with both HTTP and HTTP/2,
2022-11-11) added Apache config to enable HTTP/2. However, it only
enabled the "h2c" protocol, which allows cleartext HTTP/2 (generally
based on an upgrade header during an HTTP/1.1 request). This is what
t5559 is generally testing, since by default we don't set up SSL/TLS.
However, it should be possible to run t5559 with LIB_HTTPD_SSL set. In
that case, Apache will advertise support for HTTP/2 via ALPN during the
TLS handshake. But we need to tell it support "h2" (the non-cleartext
version) to do so. Without that, then curl does not even try to do the
HTTP/1.1 upgrade (presumably because after seeing that we did TLS but
didn't get the ALPN indicator, it assumes it would be fruitless).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the HTTP tests are run with LIB_HTTPD_SSL in the environment, then
we access the test server as https://. This causes expect_askpass to
complain, because it tries to blindly match "http://" in the prompt
shown to the user. We can adjust this to use $HTTPD_PROTO, which is set
during the setup phase.
Note that this is enough for t5551 and t5559 to pass when run with
https, but there are similar problems in other scripts that will need to
be fixed before the whole suite can run with LIB_HTTPD_SSL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pick apart a curl trace, looking for "=> Send header:" and so on, and
matching against an expected set of requests and responses. We remove
"== Info" lines entirely. However, our parser is fooled when running the
test with LIB_HTTPD_SSL on Ubuntu 20.04 (as found in our linux-gcc CI
job), as curl hands us an "Info" buffer with a newline, and we get:
== Info: successfully set certificate verify locations:
== Info: CAfile: /etc/ssl/certs/ca-certificates.crt
CApath: /etc/ssl/certs
=> Send SSL data[...]
which results in the "CApath" line ending up in the cleaned-up output,
causing the test to fail.
Arguably the tracing code should detect this and put it on two separate
"== Info" lines. But this is actually a curl bug, fixed by their
80d73bcca (tls: provide the CApath verbose log on its own line,
2020-08-18). It's simpler to just work around it here.
Since we are using GIT_TRACE_CURL, every line should just start with one
of "<=", "==", or "=>", and we can throw away anything else. In fact, we
can just replace the pattern for deleting "*" lines. Those were from the
old GIT_CURL_VERBOSE output, but we switched over in 14e24114d9
(t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var,
2016-09-05).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making a request, we check that it stored the expected cookies.
This depends on the protocol version, because the cookies we store
depend on the exact requests we made (and for ls-remote, v2 will always
hit /git-upload-pack to get the refs, whereas v0 is happy with the
initial ref advertisement).
As a result, hardly anybody runs this test, as you'd have to manually
set GIT_TEST_PROTOCOL_VERSION=0 to do so.
Let's teach it to handle both protocol versions. One way to do this
would be to make the expectation conditional on the protocol used. But
there's a simpler solution. The reason that v0 doesn't hit
/git-upload-pack is that ls-remote doesn't fetch any objects. If we
instead do a fetch (making sure there's an actual object to grab), then
both v0 and v2 will hit the same endpoints and set the same cookies.
Note that we do have to clean up our new tag here; otherwise it confuses
the later "clone 2,000 tags" test.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making an HTTP request that should store cookies, we check that
the expected values are in the cookie file. We don't want to look at the
whole file, because it has noisy comments at the top that we shouldn't
depend on. But we strip out the interesting bits using "tail -3", which
is brittle. It requires us to put an extra blank line in our expected
output, and it would fail to notice any reordering or extra content in
the cookie file.
Instead, let's just grep for non-blank lines that are not comments,
which more directly describes what we're interested in.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We perform a clone and a fetch, and then check that we saw the expected
requests in Apache's access log. In the v2 protocol, there will be one
extra request to /git-upload-pack for each operation (since the initial
/info/refs probe is just used to upgrade the protocol).
As a result, this test is a noop unless the use of the v0 protocol is
forced. Which means that hardly anybody runs it, since you have to do so
manually.
Let's update it to handle v2 and run it always. We could do this by just
conditionally adding in the extra POST lines. But if we look at the
origin of the test in 7da4e2280c (test smart http fetch and push,
2009-10-30), the point is really just to make sure that the smart
git-upload-pack service was used at all. So rather than counting up the
individual requests, let's just make sure we saw each of the expected
types. This is a bit looser, but makes maintenance easier.
Since we're now matching with grep, we can also loosen the HTTP/1.1
match, which allows this test to pass when run with HTTP/2 via t5559.
That lets:
GIT_TEST_PROTOCOL_VERSION=0 ./t5559-http-fetch-smart-http2.sh
run to completion, which previously failed (and of course it works if
you use v2, as well).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After cloning an http repository, we check the curl trace to make sure
the expected requests were made. But since the expected trace was never
updated to handle v2, it is only run when you ask the test suite to run
in v0 mode (which hardly anybody does).
Let's update it to handle both protocols. This isn't too hard since v2
just sends an extra header and an extra request. So we can just annotate
those extra lines and strip them out for v0 (and drop the annotations
for v2). I didn't bother handling v1 here, as it's not really of
practical interest (it would drop the extra v2 request, but still have
the "git-protocol" lines).
There's a similar tweak needed at the end. Since we check the
"accept-encoding" value loosely, we grep for it rather than finding it
in the verbatim trace. This grep insists that there are exactly 2
matches, but of course in v2 with the extra request there are 3. We
could tweak the number, but it's simpler still to just check that we saw
at least one match. The verbatim check already confirmed how many
instances of the header we have; we're really just checking here that
"gzip" is in the value (it's possible, of course, that the headers could
have different values, but that seems like an unlikely bug).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "clone http repository" test, we check the curl trace to make
sure the expected requests were made. This whole script was marked to
handle only the v0 protocol in d790ee1707 (tests: fix protocol version
for overspecifications, 2019-02-25). That makes sense, since v2 requires
an extra request, so tests as specific as this would fail unless
modified.
Later, in preparation for v2 becoming the default, this was tweaked by
8a1b0978ab (test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate,
2019-12-23). There we run the trace check only if the user has
explicitly asked to test protocol version 0. But it also forced the
clone itself to run with the v0 protocol.
This makes the check for "can we expect a v0 trace" silly; it will
always be v0. But much worse, it means that the clone we are testing is
not like the one that normal users would run. They would use the
defaults, which are now v2. And since this is supposed to be a basic
check of clone-over-http, we should do the same.
Let's fix this by dropping the extra v0 override. The test still passes
because the trace checking only kicks in if we asked to use v0
explicitly (this is the same as before; even though we were running a v0
clone, unless you specifically set GIT_TEST_PROTOCOL_VERSION=0, the
trace check was always skipped).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check that the curl trace of a clone has the lines we expect, but
this won't work when we run the test under t5559, because a few details
are different under HTTP/2 (but nobody noticed because it only happens
when you manually set GIT_TEST_PROTOCOL_VERSION to "0").
We can handle both HTTP protocols with a few tweaks:
- we'll drop the HTTP "101 Switching Protocols" response, as well as
various protocol upgrade headers. These details aren't interesting
to us. We just want to make sure the correct protocol was used (and
we do in the main request/response lines).
- successful HTTP/2 responses just say "200" and not "200 OK"; we can
normalize these
- replace HTTP/1.1 with a variable in the request/response lines. We
can use the existing $HTTP_PROTO for this, as it's already set to
"HTTP/2" when appropriate. We do need to tweak the fallback value to
"HTTP/1.1" to match what curl will write (prior to this patch, the
fallback value didn't matter at all; we only checked if it was the
literal string "HTTP/2").
Note that several lines still expect HTTP/1.1 unconditionally. The first
request does so because the client requests an upgrade during the
request. The POST request and response do so because you can't do an
upgrade if there is a request body. (This will all be different if we
trigger HTTP/2 via ALPN, but the tests aren't yet capable of that).
This is enough to let:
GIT_TEST_PROTOCOL_VERSION=0 ./t5559-http-fetch-smart-http2.sh
pass the "clone http repository" test (but there are some other failures
later on).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a test in t5551 which checks the curl trace (after simplifying
it a bit). It doesn't work with HTTP/2, because in that case curl
outputs all of the headers in lower-case. Even though this test is run
with HTTP/2 by t5559, nobody has noticed because checking the trace only
happens if GIT_TEST_PROTOCOL_VERSION is manually set to "0".
Let's fix this by lower-casing all of the header names in the trace, and
then checking for those in our expected code (this is easier than making
HTTP/2 traces look like HTTP/1.1, since HTTP/1.1 uses title-casing).
Sadly, we can't quite do this in our existing sed script. This works if
you have GNU sed:
s/^\\([><]\\) \\([A-Za-z0-9-]*:\\)/\1 \L\2\E/
but \L is a GNU-ism, and I don't think there's a portable solution. We
could just "tr A-Z a-z" on the way in, of course, but that makes the
non-header parts harder to read (e.g., lowercase "post" requests). But
to paraphrase Baron Munchausen, I have learned from experience that a
modicum of Perl can be most efficacious.
Note that this doesn't quite get the test passing with t5559; there are
more fixes needed on top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b0c4adcdd7 (remote-curl: send Accept-Language header to server,
2022-07-11) added tests to make sure the header is sent via HTTP.
However, it checks in two places:
1. In the expected trace output, we check verbatim for the header and
its value.
2. Afterwards, we grep for the header again in the trace file.
This (2) is probably cargo-culted from the earlier grep for
Accept-Encoding. It is needed for the encoding because we smudge the
value of that header when doing the verbatim check; see 1a53e692af
(remote-curl: accept all encodings supported by curl, 2018-05-22).
But we don't do so for the language header, so any problem that the
"grep" would catch in (2) would already have been caught by (1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9ee6bcd398 (t5541-http-push: add test for URLs with trailing
slash, 2010-04-08) added a test that clones a URL with a trailing slash,
and confirms that we don't send a doubled slash (like "$url//info/refs")
to the server.
But this test makes no sense in t5541, which is about pushing. It should
have been added in t5551. Let's move it there.
But putting it at the end is tricky, since it checks the entire contents
of the Apache access log. We could get around this by clearing the log
before our test. But there's an even simpler solution: just make sure no
doubled slashes appear in the log (fortunately, "http://" does not
appear in the log itself).
As a bonus, this also lets us drop the check for the v0 protocol (which
is otherwise necessary since v2 makes multiple requests, and
check_access_log insists on exactly matching the number of requests,
even though we don't care about that here).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a test which checks to see if a request to git-receive-pack was
made. Originally, it was checking the entire set of requests made in the
script so far, including clones, and thus it would break when run with
the v2 protocol (since that implies an extra request for fetches).
Since the previous commit, though, we are only checking the requests
made by a single push. And since there is no v2 push protocol, the test
now passes no matter what's in GIT_TEST_PROTOCOL_VERSION. We can just
run it all the time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a test in t5541 that confirms that "git push" makes two requests
(a GET to /info/refs, and a POST to /git-receive-pack). However, it's a
noop unless GIT_TEST_PROTOCOL_VERSION is set to "0", due to 8a1b0978ab
(test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate,
2019-12-23).
This means that almost nobody runs it. And indeed, it has been broken
since b0c4adcdd7 (remote-curl: send Accept-Language header to server,
2022-07-11). But the fault is not in that commit, but in how brittle the
test is. It runs after several operations have been performed, which
means that it expects to see the complete set of requests made so far in
the script. Commit b0c4adcdd7 added a new test, which means that the
"used receive-pack service" test must be updated, too.
Let's fix this by making the test less brittle. We'll move it higher in
the script, right after the first push has completed. And we'll clear
the access log right before doing the push, so we'll see only the
requests from that command.
This is technically testing less, in that we won't check that all of
those other requests also correctly used smart http. But there's no
particular reason think that if the first one did, the others wouldn't.
After this patch, running:
GIT_TEST_PROTOCOL_VERSION=0 ./t5541-http-push-smart.sh
passes, whereas it did not before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some passwords have an expiry date known at generation. This may be
years away for a personal access token or hours for an OAuth access
token.
When multiple credential helpers are configured, `credential fill` tries
each helper in turn until it has a username and password, returning
early. If Git authentication succeeds, `credential approve`
stores the successful credential in all helpers. If authentication
fails, `credential reject` erases matching credentials in all helpers.
Helpers implement corresponding operations: get, store, erase.
The credential protocol has no expiry attribute, so helpers cannot
store expiry information. Even if a helper returned an improvised
expiry attribute, git credential discards unrecognised attributes
between operations and between helpers.
This is a particular issue when a storage helper and a
credential-generating helper are configured together:
[credential]
helper = storage # eg. cache or osxkeychain
helper = generate # eg. oauth
`credential approve` stores the generated credential in both helpers
without expiry information. Later `credential fill` may return an
expired credential from storage. There is no workaround, no matter how
clever the second helper. The user sees authentication fail (a retry
will succeed).
Introduce a password expiry attribute. In `credential fill`, ignore
expired passwords and continue to query subsequent helpers.
In the example above, `credential fill` ignores the expired password
and a fresh credential is generated. If authentication succeeds,
`credential approve` replaces the expired password in storage.
If authentication fails, the expired credential is erased by
`credential reject`. It is unnecessary but harmless for storage
helpers to self prune expired credentials.
Add support for the new attribute to credential-cache.
Eventually, I hope to see support in other popular storage helpers.
Example usage in a credential-generating helper
https://github.com/hickford/git-credential-oauth/pull/16
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Reviewed-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the run-hooks API to allow feeding data from the standard
input when running the hook script(s).
* ab/hook-api-with-stdin:
hook: support a --to-stdin=<path> option
sequencer: use the new hook API for the simpler "post-rewrite" call
hook API: support passing stdin to hooks, convert am's 'post-rewrite'
run-command: allow stdin for run_processes_parallel
run-command.c: remove dead assignment in while-loop
Leak fixes.
* ab/various-leak-fixes:
push: free_refs() the "local_refs" in set_refspecs()
push: refactor refspec_append_mapped() for subsequent leak-fix
receive-pack: release the linked "struct command *" list
grep API: plug memory leaks by freeing "header_list"
grep.c: refactor free_grep_patterns()
builtin/merge.c: free "&buf" on "Your local changes..." error
builtin/merge.c: use fixed strings, not "strbuf", fix leak
show-branch: free() allocated "head" before return
commit-graph: fix a parse_options_concat() leak
http-backend.c: fix cmd_main() memory leak, refactor reg{exec,free}()
http-backend.c: fix "dir" and "cmd_arg" leaks in cmd_main()
worktree: fix a trivial leak in prune_worktrees()
repack: fix leaks on error with "goto cleanup"
name-rev: don't xstrdup() an already dup'd string
various: add missing clear_pathspec(), fix leaks
clone: use free() instead of UNLEAK()
commit-graph: use free_commit_graph() instead of UNLEAK()
bundle.c: don't leak the "args" in the "struct child_process"
tests: mark tests as passing with SANITIZE=leak
As mentioned in 'git-range-diff.txt': "`git range-diff` also accepts the
regular diff options (see linkgit:git-diff[1])...", but '--abbrev' is not
in the "regular" scope.
In Git, the "abbrev" of an object may not be a fixed value in different
repositories, depending on the needs of the them(Linus mentioned in
e6c587c7 in 2016: "the Linux kernel project needs 11 to 12 hexdigits"
at that time ), that's why a user may want to display abbrev according
to a specified length.
Although a similar effect can be achieved through configuration (like:
git -c core.abbrev=<abbrev>), but based on ease of use (many users may not
know that the -c option can be specified) and the description in existing
document, supporting users to directly use '--abbrev', could be a good way.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prior to 51243f9 (run-command API: don't fall back on online_cpus(),
2022-10-12) `git fetch --multiple --jobs=0` would choose some default amount
of jobs, similar to `git -c fetch.parallel=0 fetch --multiple`. While our
documentation only ever promised that `fetch.parallel` would fall back to a
"sensible default", it makes sense to do the same for `--jobs`. So fall back
to online_cpus() and not BUG() out.
This fixes https://github.com/git-for-windows/git/issues/4302
Reported-by: Drew Noakes <drnoakes@microsoft.com>
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
the `cd` followed the old style which wasn't consistent with the rest of
the test suite, so this commit makes it consistent with the current
style of the test suite for `cd` in subshell.
Signed-off-by: Ashutosh Pandey <ashutosh.pandeyhlr007@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to specify diff algorithms per file type. For example,
one may want to use the minimal diff algorithm for .json files, another
for .c files, etc.
The diff machinery already checks attributes for a diff driver. Teach
the diff driver parser a new type "algorithm" to look for in the
config, which will be used if a driver has been specified through the
attributes.
Enforce precedence of the diff algorithm by favoring the command line
option, then looking at the driver attributes & config combination, then
finally the diff.algorithm config.
To enforce precedence order, use a new `ignore_driver_algorithm` member
during options parsing to indicate the diff algorithm was set via command
line args.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that the argument to the "label" and "update-ref" commands is a
valid refname when the todo list is parsed rather than waiting until the
command is executed. This means that the user can deal with any errors
at the beginning of the rebase rather than having it stop halfway
through due to a typo in a label name. The "update-ref" command is
changed to reject single level refs as it is all to easy to type
"update-ref branch" which is incorrect rather than "update-ref
refs/heads/branch"
Note that it is not straight forward to check the arguments to "reset"
and "merge" commands as they may be any revision, not just a refname and
we do not have an equivalent of check_refname_format() for revisions.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 647982bb71 (delta-islands: free island_marks and bitmaps, 2023-02-03)
we have introduced logic to free `island_marks` in order to reduce heap
memory usage in git-pack-objects(1). This commit is causing segfaults in
the case where this Git command does not load delta islands at all, e.g.
when reading object IDs from standard input. One such crash can be hit
when using repacking multi-pack-indices with delta islands enabled.
The root cause of this bug is that we unconditionally dereference the
`island_marks` variable even in the case where it is a `NULL` pointer,
which is fixed by making it conditional. Note that we still leave the
logic in place to set the pointer to `-1` to detect use-after-free bugs
even when there are no loaded island marks at all.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow users to specify the modification time of archive entries. The
new option --mtime uses approxidate() to parse a time specification and
overrides the default of using the current time for trees and the commit
time for tags and commits. It can be used to create a reproducible
archive for a tree, or to use a specific mtime without creating a commit
with GIT_COMMITTER_DATE set.
This implementation doesn't support the negated form of the new option,
i.e. --no-mtime is not accepted. It is not possible to have no mtime at
all. We could use the Unix epoch or revert to the default behavior, but
since negation is not necessary for the intended use it's left undecided
for now.
Requested-by: Raul E Rangel <rrangel@chromium.org>
Suggested-by: demerphq <demerphq@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a lower precedence configuration file (e.g. /etc/gitconfig)
defines format.attach in any way, there was no way to disable it in
a more specific configuration file (e.g. $HOME/.gitconfig).
Change the behaviour of setting it to an empty string. It used to
mean that the result is still a multipart message with only dashes
used as a multi-part separator, but now it resets the setting to
the default (which would be to give an inline patch, unless other
command line options are in effect).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The symlink setup in t0066 makes several directories with links, dir4
through dir6. But ever since dir5 was introduced in fa1da7d2ee
(dir-iterator: add flags parameter to dir_iterator_begin, 2019-07-10),
it has never actually been used. It was left over from an earlier
iteration of the patch which tried to handle recursive symlinks
specially, as seen in:
https://lore.kernel.org/git/20190502144829.4394-7-matheus.bernardino@usp.br/
It's not hurting any of the existing tests to be there, but the extra
setup is confusing to anybody trying to read and understand the tests.
Let's drop the extra directory, and we'll rename "dir6" to "dir5" so
nobody wonders whether the gap in naming is important.
Helped-by: Matheus Tavares Bernardino <matheus.tavb@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not test our http proxy functionality at all in the test suite, so
this is a pretty big blind spot. Let's at least add a basic check that
we can go through an authenticating proxy to perform a clone.
A few notes on the implementation:
- I'm using a single apache instance to proxy to itself. This seems to
work fine in practice, and we can check with a test that this rather
unusual setup is doing what we expect.
- I've put the proxy tests into their own script, and it's the only
one which loads the apache proxy config. If any platform can't
handle this (e.g., doesn't have the right modules), the start_httpd
step should fail and gracefully skip the rest of the script (but all
the other http tests in existing scripts will continue to run).
- I used a separate passwd file to make sure we don't ever get
confused between proxy and regular auth credentials. It's using the
antiquated crypt() format. This is a terrible choice security-wise
in the modern age, but it's what our existing passwd file uses, and
should be portable. It would probably be reasonable to switch both
of these to bcrypt, but we can do that in a separate patch.
- On the client side, we test two situations with credentials: when
they are present in the url, and when the username is present but we
prompt for the password. I think we should be able to handle the
case that _neither_ is present, but an HTTP 407 causes us to prompt
for them. However, this doesn't seem to work. That's either a bug,
or at the very least an opportunity for a feature, but I punted on
it for now. The point of this patch is just getting basic coverage,
and we can explore possible deficiencies later.
- this doesn't work with LIB_HTTPD_SSL. This probably would be
valuable to have, as https over an http proxy is totally different
(it uses CONNECT to tunnel the session). But adding in
mod_proxy_connect and some basic config didn't seem to work for me,
so I punted for now. Much of the rest of the test suite does not
currently work with LIB_HTTPD_SSL either, so we shouldn't be making
anything much worse here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `FOLLOW_SYMLINKS` flag was added to the dir-iterator API in
fa1da7d2ee (dir-iterator: add flags parameter to dir_iterator_begin,
2019-07-10) in order to follow symbolic links while traversing through a
directory.
`FOLLOW_SYMLINKS` gained its first caller in ff7ccc8c9a (clone: use
dir-iterator to avoid explicit dir traversal, 2019-07-10), but it was
subsequently removed in 6f054f9fb3 (builtin/clone.c: disallow `--local`
clones with symlinks, 2022-07-28).
Since then, we've held on to the code for `DIR_ITERATOR_FOLLOW_SYMLINKS`
in the name of making minimally invasive changes during a security
embargo.
In fact, we even changed the dir-iterator API in bffc762f87
(dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS,
2023-01-24) without having any non-test callers of that flag.
Now that we're past those security embargo(s), let's finalize our
cleanup of the `DIR_ITERATOR_FOLLOW_SYMLINKS` code and remove its
implementation since there are no remaining callers.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test helper feeds 256kB of data at once to a single invocation
of the write(2) system call, which may be too much for some
platforms.
Call our xwrite() wrapper that knows to honor MAX_IO_SIZE limit and
cope with short writes due to EINTR instead, and die a bit more
loudly by calling die_errno() when xwrite() indicates an error.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finally retire the scripted "git add -p/-i" implementation and have
everybody use the one reimplemented in C.
* ab/retire-scripted-add-p:
docs & comments: replace mentions of "git-add--interactive.perl"
add API: remove run_add_interactive() wrapper function
add: remove "add.interactive.useBuiltin" & Perl "git add--interactive"
Userdiff regexp update for Java language.
* ar/userdiff-java-update:
userdiff: support Java sealed classes
userdiff: support Java record types
userdiff: support Java type parameters
Plug leaks in sequencer subsystem and its users.
* ab/sequencer-unleak:
commit.c: free() revs.commit in get_fork_point()
builtin/rebase.c: free() "options.strategy_opts"
sequencer.c: always free() the "msgbuf" in do_pick_commit()
builtin/rebase.c: fix "options.onto_name" leak
builtin/revert.c: move free-ing of "revs" to replay_opts_release()
sequencer API users: fix get_replay_opts() leaks
sequencer.c: split up sequencer_remove_state()
rebase: use "cleanup" pattern in do_interactive_rebase()
The bundle-URI subsystem adds support for creation-token heuristics
to help incremental fetches.
* ds/bundle-uri-5:
bundle-uri: test missing bundles with heuristic
bundle-uri: store fetch.bundleCreationToken
fetch: fetch from an external bundle URI
bundle-uri: drop bundle.flag from design doc
clone: set fetch.bundleURI if appropriate
bundle-uri: download in creationToken order
bundle-uri: parse bundle.<id>.creationToken values
bundle-uri: parse bundle.heuristic=creationToken
t5558: add tests for creationToken heuristic
bundle: verify using check_connected()
bundle: test unbundling with incomplete history
There are few things more frustrating when signing a commit fails than
reading a terse "error: gpg failed to sign the data" message followed by
the unsurprising "fatal: failed to write commit object" message.
In many cases where signing a commit or tag fails, `gpg` actually said
something helpful, on its stderr, and Git even consumed that, but then
keeps mum about it.
Teach Git to stop withholding that rather important information.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test case not only increases test coverage in setups without
working gpg, but also prepares for verifying that the error message of
`gpg.program` is shown upon failure.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To shorten a fully qualified ref (e.g., taking "refs/heads/foo" to just
"foo"), we munge the usual lookup rules ("refs/heads/%.*s", etc) to drop
the ".*" modifier (so "refs/heads/%s"), and then use sscanf() to match
that against the refname, pulling the "%s" content into a separate
buffer.
This has a few downsides:
- sscanf("%s") reportedly misbehaves on macOS with some input and
locale combinations, returning a partial or garbled string. See
this thread:
https://lore.kernel.org/git/CAGF3oAcCi+fG12j-1U0hcrWwkF5K_9WhOi6ZPHBzUUzfkrZDxA@mail.gmail.com/
- scanf's matching of "%s" is greedy. So the "refs/remotes/%s/HEAD"
rule would never pull "origin" out of "refs/remotes/origin/HEAD".
Instead it always produced "origin/HEAD", which is redundant with
the "refs/remotes/%s" rule.
- scanf in general is an error-prone interface. For example, scanning
for "%s" will copy bytes into a destination string, which must have
been correctly sized ahead of time to avoid a buffer overflow. In
this case, the code is OK (the buffer is pessimistically sized to
match the original string, which should give us a maximum). But in
general, we do not want to encourage people to use scanf at all.
So instead, let's note that our lookup rules are not arbitrary format
strings, but all contain exactly one "%.*s" placeholder. We already rely
on this, both for lookup (we feed the lookup format along with exactly
one int/ptr combo to snprintf, etc) and for shortening (we munge "%.*s"
to "%s", and then insist that sscanf() finds exactly one result).
We can parse this manually by just matching the bytes that occur before
and after the "%.*s" placeholder. While we have a few extra lines of
parsing code, the result is arguably simpler, as can skip the
preprocessing step and its tricky memory management entirely.
The in-code comments should explain the parsing strategy, but there's
one subtle change here. The original code allocated a single buffer, and
then overwrote it in each loop iteration, since that's the only option
sscanf() gives us. But our parser can actually return a ptr/len combo
for the matched string, which is all we need (since we just feed it back
to the lookup rules with "%.*s"), and then copy it only when returning
to the caller.
There are a few new tests here, all using symbolic-ref (the code can be
triggered in many ways, but symrefs are convenient in that we don't need
to create a real ref, which avoids any complications from the filesystem
munging the name):
- the first covers the real-world case which misbehaved on macOS.
Setting LC_ALL is required to trigger the problem there (since
otherwise our tests use LC_ALL=C), and hopefully is at worst simply
ignored on other systems (and doesn't cause libc to complain, etc,
on systems without that locale).
- the second covers the "origin/HEAD" case as discussed above, which
is now fixed
- the remainder are for "weird" cases that work both before and after
this patch, but would be easy to get wrong with off-by-one problems
in the parsing (and came out of discussions and earlier iterations
of the patch that did get them wrong).
- absent here are tests of boring, expected-to-work cases like
"refs/heads/foo", etc. Those are covered all over the test suite
both explicitly (for-each-ref's refname:short) and implicitly (in
the output of git-status, etc).
Reported-by: 孟子易 <mengziyi540841@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-tree --format='%(path) %(path)' $tree $path" showed the
path three times, which has been corrected.
* rs/ls-tree-path-expansion-fix:
ls-tree: remove dead store and strbuf for quote_c_style()
ls-tree: fix expansion of repeated %(path)
The logic to see if we are using the "cone" mode by checking the
sparsity patterns has been tightened to avoid mistaking a pattern
that names a single file as specifying a cone.
* ws/single-file-cone:
dir: check for single file cone patterns
"git diff --relative" did not mix well with "git diff --ext-diff",
which has been corrected.
* jk/ext-diff-with-relative:
diff: drop "name" parameter from prepare_temp_file()
diff: clean up external-diff argv setup
diff: use filespec path to set up tempfiles for ext-diff
Fix to a small regression in 2.38 days.
* ab/bundle-wo-args:
bundle <cmd>: have usage_msg_opt() note the missing "<file>"
builtin/bundle.c: remove superfluous "newargc" variable
bundle: don't segfault on "git bundle <subcmd>"
When given a pattern that matches an empty string at the end of a
line, the code to parse the "git diff" line-ranges fell into an
infinite loop, which has been corrected.
* lk/line-range-parsing-fix:
line-range: fix infinite loop bug with '$' regex
Test the character classifiers added by 1c149ab2dd (ctype: support
iscntrl, ispunct, isxdigit and isprint, 2012-10-15) and 0fcec2ce54
(format-patch: make rfc2047 encoding more strict, 2012-10-18).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the character classifiers added by 43ccdf56ec (ctype: implement
islower/isupper macro, 2012-02-10).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the character classifier added by c2e9364a06 (cleanup: add
isascii(), 2009-03-07). It returns 1 for NUL as well, which requires
special treatment, as our string-based tester can't find it with
strcmp(3). Allow NUL to be given as the first character in a class
specification string. This has the downside of no longer supporting
the empty string, but that's OK since we are not interested in testing
character classes with no members.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of forcing the porcelain commands to always read the
configuration variables related to the signing and verifying
signatures, lazily initialize the necessary subsystem on demand upon
the first use.
This hopefully would make it more future-proof as we do not have to
think and decide whether we should call git_gpg_config() in the
git_config() callback for each command.
A few git_config() callback functions that used to be custom
callbacks are now just a thin wrapper around git_default_config().
We could further remove, git_FOO_config and replace calls to
git_config(git_FOO_config) with git_config(git_default_config), but
to make it clear which ones are affected and the effect is only the
removal of git_gpg_config(), it is vastly preferred not to do such a
change in this step (they can be done on top once the dust settled).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test update.
* jk/httpd-test-updates:
t/lib-httpd: increase ssl key size to 2048 bits
t/lib-httpd: drop SSLMutex config
t/lib-httpd: bump required apache version to 2.4
t/lib-httpd: bump required apache version to 2.2
Commit 7550424804 ("name-rev: include taggerdate in considering the best
name", 2016-04-22) introduced the idea of using taggerdate in the
criteria for selecting the best name. At the time, a certain commit in
linux.git -- namely, aed06b9cfcab -- was being named by name-rev as
v4.6-rc1~9^2~792
which, while correct, was very suboptimal. Some investigation found
that tweaking the MERGE_TRAVERSAL_WEIGHT to lower it could give
alternate answers such as
v3.13-rc7~9^2~14^2~42
or
v3.13~5^2~4^2~2^2~1^2~42
A manual solution involving looking at tagger dates came up with
v3.13-rc1~65^2^2~42
which is much nicer. That workaround was then implemented in name-rev.
Unfortunately, the taggerdate heuristic is causing bugs. I was pointed
to a case in a private repository where name-rev reports a name of the
form
v2022.10.02~86
when users expected to see one of the form
v2022.10.01~2
(I've modified the names and numbers a bit from the real testcase.) As
you can probably guess, v2022.10.01 was created after v2022.10.02 (by a
few hours), even though it pointed to an older commit. While the
condition is unusual even in the repository in question, it is not the
only problematic set of tags in that repository. The taggerdate logic
is causing problems.
Further, it turns out that this taggerdate heuristic isn't even helping
anymore. Due to the fix to naming logic in 3656f84278 ("name-rev:
prefer shorter names over following merges", 2021-12-04), we get
improved names without the taggerdate heuristic. For the original
commit of interest in linux.git, a modern git without the taggerdate
heuristic still provides the same optimal answer of interest, namely:
v3.13-rc1~65^2^2~42
So, the taggerdate is no longer providing benefit, and it is causing
problems. Simply get rid of it.
However, note that "taggerdate" as a variable is used to store things
besides a taggerdate these days. Ever since commit ef1e74065c
("name-rev: favor describing with tags and use committer date to
tiebreak", 2017-03-29), this has been used to store committer dates and
there it is used as a fallback tiebreaker (as opposed to a primary
criteria overriding effective distance calculations). We do not want to
remove that fallback tiebreaker, so not all instances of "taggerdate"
are removed in this change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new kind of class was added in Java 17 -- sealed classes.[1] This
feature includes several new keywords that may appear in a declaration
of a class. New modifiers before name of the class: "sealed" and
"non-sealed", and a clause after name of the class marked by keyword
"permits".
The current set of regular expressions in userdiff.c already allows the
modifier "sealed" and the "permits" clause, but not the modifier
"non-sealed", which is the first hyphenated keyword in Java.[2] Allow
hyphen in the words that precede the name of type to match the
"non-sealed" modifier.
In new input file "java-sealed" for the test t4018-diff-funcname.sh, use
a Java code comment for the marker "RIGHT". This workaround is needed,
because the name of the sealed class appears on the line of code that
has the "ChangeMe" marker.
[1] Detailed description in "JEP 409: Sealed Classes"
https://openjdk.org/jeps/409
[2] "JEP draft: Keyword Management for the Java Language"
https://openjdk.org/jeps/8223002
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new kind of class was added in Java 16 -- records.[1] The syntax of
records is similar to regular classes with one important distinction:
the name of the record class is followed by a mandatory list of
components. The list is enclosed in parentheses, it may be empty, and
it may immediately follow the name of the class or type parameters, if
any, with or without separating whitespace. For example:
public record Example(int i, String s) {
}
public record WithTypeParameters<A, B>(A a, B b, String s) {
}
record SpaceBeforeComponents (String comp1, int comp2) {
}
Support records in the builtin userdiff pattern for Java. Add "record"
to the alternatives of keywords for kinds of class.
Allowing matching various possibilities for the type parameters and/or
list of the components of a record has already been covered by the
preceding patch.
[1] detailed description is available in "JEP 395: Records"
https://openjdk.org/jeps/395
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A class or interface in Java can have type parameters following the name
in the declared type, surrounded by angle brackets (paired less than and
greater than signs).[2] The type parameters -- `A` and `B` in the
examples -- may follow the class name immediately:
public class ParameterizedClass<A, B> {
}
or may be separated by whitespace:
public class SpaceBeforeTypeParameters <A, B> {
}
A part of the builtin userdiff pattern for Java matches declarations of
classes, enums, and interfaces. The regular expression requires at
least one whitespace character after the name of the declared type.
This disallows matching for opening angle bracket of type parameters
immediately after the name of the type. Mandatory whitespace after the
name of the type also disallows using the pattern in repositories with a
fairly common code style that puts braces for the body of a class on
separate lines:
class WithLineBreakBeforeOpeningBrace
{
}
Support matching Java code in more diverse code styles and declarations
of classes and interfaces with type parameters immediately following the
name of the type in the builtin userdiff pattern for Java. Do so by
just matching anything until the end of the line after the keywords for
the kind of type being declared.
[1] Since Java 5 released in 2004.
[2] Detailed description is available in the Java Language
Specification, sections "Type Variables" and "Parameterized Types":
https://docs.oracle.com/javase/specs/jls/se17/html/jls-4.html#jls-4.4
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the "path_to_stdin" API added in the preceding commit in the
"git hook run" command.
For now we won't be using this command interface outside of the tests,
but exposing this functionality makes it easier to test the hook
API. The plan is to use this to extend the "sendemail-validate"
hook[1][2].
1. https://lore.kernel.org/git/ad152e25-4061-9955-d3e6-a2c8b1bd24e7@amd.com
2. https://lore.kernel.org/git/20230120012459.920932-1-michael.strawbridge@amd.com
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "scalar" to warn but continue when its periodic maintenance
feature cannot be enabled.
* ds/scalar-ignore-cron-error:
scalar: only warn when background maintenance fails
t921*: test scalar behavior starting maintenance
t: allow 'scalar' in test_must_fail
In a remote with multiple configured URLs, `git remote -v` shows the
correct url that fetch uses. However, `git config remote.<remote>.url`
returns the last defined url instead. This discrepancy can cause
confusion for users with a remote defined as such, since any url
defined after the first essentially acts as a pushurl.
Add documentation to clarify how fetch interacts with multiple urls
and how push interacts with multiple pushurls and urls.
Add test affirming interaction between fetch and multiple urls.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been with us since d96855ff51 (merge-base:
teach "--fork-point" mode, 2013-10-23).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the existing "squash_onto_name" added in [1] we need to
free() the xstrdup()'d "options.onto.name" added for "--keep-base" in
[2]..
1. 9dba809a69 (builtin rebase: support --root, 2018-09-04)
2. 414d924beb (rebase: teach rebase --keep-base, 2019-08-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the replay_opts_release() function added in the preceding commit
non-static, and use it for freeing the "struct replay_opts"
constructed for "rebase" and "revert".
To safely call our new replay_opts_release() we'll need to stop
calling it in sequencer_remove_state(), and instead call it where we
allocate the "struct replay_opts" itself.
This is because in e.g. do_interactive_rebase() we construct a "struct
replay_opts" with "get_replay_opts()", and then call
"complete_action()". If we get far enough in that function without
encountering errors we'll call "pick_commits()" which (indirectly)
calls sequencer_remove_state() at the end.
But if we encounter errors anywhere along the way we'd punt out early,
and not free() the memory we allocated. Remembering whether we
previously called sequencer_remove_state() would be a hassle.
Using a FREE_AND_NULL() pattern would also work, as it would be safe
to call replay_opts_release() repeatedly. But let's fix this properly
instead, by having the owner of the data free() it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been with us since this code was added in
ca02465b41 (push: use remote.$name.push as a refmap, 2013-12-03).
The "remote = remote_get(...)" added in the same commit would seem to
leak based only on the context here, but that function is a wrapper
for sticking the remotes we fetch into "the_repository->remote_state".
See fd3cb0501e (remote: move static variables into per-repository
struct, 2021-11-17) for the addition of code in repository.c that
free's the "remote" allocated here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been with us since this code was introduced
in [1]. Later in [2] we started using FLEX_ALLOC_MEM() to allocate the
"struct command *".
1. 575f497456 (Add first cut at "git-receive-pack", 2005-06-29)
2. eb1af2df0b (git-receive-pack: start parsing ref update commands,
2005-06-29)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up 465028e0e2 (merge: add missing strbuf_release(),
2021-10-07) and address the "msg" memory leak in this block. We could
free "&msg" before the "goto done" here, but even better is to avoid
allocating it in the first place.
By repeating the "Fast-forward" string here we can avoid using a
"struct strbuf" altogether.
Suggested-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were leaking both the "struct strbuf" in prune_worktrees(), as well
as the "path" we got from should_prune_worktree(). Since these were
the only two uses of the "struct string_list" let's change it to a
"DUP" and push these to it with "string_list_append_nodup()".
For the string_list_append_nodup() we could also string_list_append()
the main_path.buf, and then strbuf_release(&main_path) right away. But
doing it this way avoids an allocation, as we already have the "struct
strbuf" prepared for appending to "kept".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
