When GIT_COMPLETION_IGNORE_CASE is set, also allow lowercase completion
text like "head" to match uppercase HEAD and other pseudorefs.
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_COMPLETION_IGNORE_CASE is set, --ignore-case will be added to
git for-each-ref calls so that refs can be matched case insensitively,
even when running on case sensitive filesystems.
Signed-off-by: Alison Winters <alisonatwork@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
* mb/config-document-include:
config.txt: document include, includeIf
Git config's tab completion does not yet know about the "include"
and "includeIf" sections, nor the related "path" variable.
Add a description for these two sections in
'Documentation/config/includeif.txt', which points to git-config's
documentation, specifically the "Includes" and "Conditional Includes"
subsections.
As a side effect, tab completion can successfully complete the
'include', 'includeIf', and 'include.add' expressions.
This effect is tested by two new ad-hoc tests.
Variable completion only works for "include" for now.
Credit for the ideas behind this patch goes to
Ævar Arnfjörð Bjarmason.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Manuel Boni <ziosombrero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "FUNNYNAMES" test prerequisite passes on Cygwin, as the Cygwin
file system interface has a workaround for the underlying operating
system's lack of support for tabs, newlines or quotes. However, it does
not add support for backslash, which is treated as a directory
separator, meaning one of the tests added by 48803821b1 ("completion:
handle unusual characters for sparse-checkout", 2022-02-07) will fail on
Cygwin.
To avoid this failure while still getting maximal test coverage, split
that test into two: test handling of paths that include tabs on anything
that has the FUNNYNAMES prerequisite, but skip testing handling of paths
that include backslashes unless both FUNNYNAMES is set and the system is
not Cygwin.
It might be nice to have more granularity than "FUNNYNAMES" and its
sibling "FUNNIERNAMES" provide, so that tests could be run based on
specific individual characters supported by the file system being
tested, but that seems like it would make the prerequisite checks in
this area much more verbose for very little gain.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
Update the __gitcomp_directories method to de-quote and handle unusual
characters in directory names. Although this initially involved an attempt
to re-use the logic in __git_index_files, this method removed
subdirectories (e.g. folder1/0/ became folder1/), so instead new custom
logic was placed directly in the __gitcomp_directories method.
Note there are two tests for this new functionality - one for spaces and
accents and one for backslashes and tabs. The backslashes and tabs test
uses FUNNYNAMES to avoid running on Windows. This is because:
1. Backslashes are explicitly not allowed in Windows file paths.
2. Although tabs appear to be allowed when creating a file in a Windows
bash shell, they actually are not renderable (and appear as empty boxes
in the shell).
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_directories method to complete directory names in cone
mode sparse-checkouts. This method addresses the caveat of poor
performance in monorepos from the previous commit (by completing only one
level of directories).
The unusual character caveat from the previous commit will be fixed by the
final commit in this series.
Co-authored-by: Elijah Newren <newren@gmail.com>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct multiple issues with tab completion of the git sparse-checkout
command. These issues were:
1. git sparse-checkout <TAB> previously resulted in an incomplete list of
subcommands (it was missing reapply and add).
2. Subcommand options were not tab-completable.
3. git sparse-checkout set <TAB> and git sparse-checkout add <TAB> showed
both file names and directory names. While this may be a less surprising
behavior for non-cone mode, cone mode sparse checkouts should complete
only directory names.
Note that while the new strategy of just using git ls-tree to complete on
directory names is simple and a step in the right direction, it does have
some caveats. These are:
1. Likelihood of poor performance in large monorepos (as a result of
recursively completing directory names).
2. Inability to handle paths containing unusual characters.
These caveats will be fixed by subsequent commits in this series.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a GIT_COMPLETION_SHOW_ALL_COMMANDS=1 configuration setting to go
with the existing GIT_COMPLETION_SHOW_ALL=1 added in
c099f579b9 (completion: add GIT_COMPLETION_SHOW_ALL env var,
2020-08-19).
This will include plumbing commands such as "cat-file" in "git <TAB>"
and "git c<TAB>" completion. Without/with this I have 134 and 243
completion with git <TAB>, respectively.
It was already possible to do this by tweaking
GIT_TESTING_PORCELAIN_COMMAND_LIST= from the outside, that testing
variable was added in 84a9713106 (completion: let git provide the
completable command list, 2018-05-20). Doing this before loading
git-completion.bash worked:
export GIT_TESTING_PORCELAIN_COMMAND_LIST="$(git --list-cmds=builtins,main,list-mainporcelain,others,nohelpers,alias,list-complete,config)"
But such testing variables are not meant to be used from the outside,
and we make no guarantees that those internal won't change. So let's
expose this as a dedicated configuration knob.
It would be better to teach --list-cmds=* a new category which would
include all of these groups, but that's a larger change that we can
leave for some other time.
1. https://lore.kernel.org/git/CAGP6POJ9gwp+t-eP3TPkivBLLbNb2+qj=61Mehcj=1BgrVOSLA@mail.gmail.com/
Reported-by: Hongyi Zhao <hongyi.zhao@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change tests of git-completion.bash that re-source it to do so inside
a subshell. Re-sourcing it will clobber variables it sets, and in the
case of the "GIT_COMPLETION_SHOW_ALL=1" test added in
ca2d62b787 (parse-options: don't complete option aliases by default,
2021-07-16) change the behavior of the completion persistently.
Aside from the addition of "(" and ")" on new lines this is an
indentation-only change, only the "(" and ")" lines are changed under
"git diff -w".
So let's change that test, and for good measure do the same for the
three tests that precede it, which were added in
8b0eaa41f2 (completion: clear cached --options when sourcing the
completion script, 2018-03-22). The may not be wrong, but doing this
establishes a more reliable pattern for future tests, which might use
these as a template to copy.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of test scripts have actually been adapted to accommodate for a
configurable default branch name, but they still overrode it via the
`GIT_TEST_*` variable. Let's drop that override where possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email --git-completion-helper" only prints "format-patch"
flags. Make it print "send-email" flags as well, extracting them
programmatically from its three existing "GetOptions".
Introduce a "uniq" subroutine, otherwise --cc-cover, --to-cover and
other flags would show up twice. In addition, deduplicate flags common
to both "send-email" and "format-patch", like --from.
Remove extraneous flags: --h and --git-completion-helper.
Add trailing "=" to options that expect an argument, inline with
the format-patch implementation.
Add a completion test for "send-email --validate", a send-email flag.
Signed-off-by: Thiago Perrotta <tbperrotta@gmail.com>
Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
We need to ignore options that don't start with -- as well.
Depending on the value of COMP_WORDBREAKS the last word could be
duplicated otherwise.
Can be tested with:
git merge -X diff-algorithm=<tab>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'OPT_ALIAS' was created in 5c387428f1 (parse-options: don't emit
"ambiguous option" for aliases, 2019-04-29), 'git clone
--git-completion-helper', which is used by the Bash completion script to
list options accepted by clone (via '__gitcomp_builtin'), lists both
'--recurse-submodules' and its alias '--recursive', which was not the
case before since '--recursive' had the PARSE_OPT_HIDDEN flag set, and
options with this flag are skipped by 'parse-options.c::show_gitcomp',
which implements 'git <cmd> --git-completion-helper'.
This means that typing 'git clone --recurs<TAB>' will yield both
'--recurse-submodules' and '--recursive', which is not ideal since both
do the same thing, and so the completion should directly complete the
canonical option.
At the point where 'show_gitcomp' is called in 'parse_options_step',
'preprocess_options' was already called in 'parse_options', so any
aliases are now copies of the original options with a modified help text
indicating they are aliases.
Helpfully, since 64cc539fd2 (parse-options: don't leak alias help
messages, 2021-03-21) these copies have the PARSE_OPT_FROM_ALIAS flag
set, so check that flag early in 'show_gitcomp' and do not print them,
unless the user explicitely requested that *all* completion be shown (by
setting 'GIT_COMPLETION_SHOW_ALL'). After all, if we want to encourage
the use of '--recurse-submodules' over '--recursive', we'd better just
suggest the former.
The only other options alias is 'log' and friends' '--mailmap', which is
an alias for '--use-mailmap', but the Bash completion helpers for these
commands do not use '__gitcomp_builtin', and thus are unnaffected by
this change.
Test the new behaviour in t9902-completion.sh. As a side effect, this
also tests the correct behaviour of GIT_COMPLETION_SHOW_ALL, which was
not tested before. Note that since '__gitcomp_builtin' caches the
options it shows, we need to re-source the completion script to clear
that cache for the second test.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further update the command line completion (in contrib/) for "git
stash".
* dl/complete-stash-updates:
git-completion.bash: consolidate cases in _git_stash()
git-completion.bash: use $__git_cmd_idx in more places
git-completion.bash: rename to $__git_cmd_idx
git-completion.bash: separate some commands onto their own line
With the introduction of the $__git_cmd_idx variable in e94fb44042
(git-completion.bash: pass $__git_subcommand_idx from __git_main(),
2021-03-24), completion functions were able to know the index at which
the git command is listed, allowing them to skip options that are given
to the underlying git itself, not the corresponding command (e.g.
`-C asdf` in `git -C asdf branch`).
While most of the changes here are self-explanatory, some bear further
explanation.
For the __git_find_on_cmdline() and __git_find_last_on_cmdline() pair of
functions, these functions are only ever called in the context of a git
command completion function. These functions will only care about words
after the command so we can safely ignore the words before this.
For _git_worktree(), this change is technically a no-op (once the
__git_find_last_on_cmdline change is also applied). It was in poor style
to have hard-coded on the index right after `worktree`. In case
`git worktree` were to ever learn to accept options, the current
situation would be inflexible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New log.diffMerges configuration variable sets the format that
--diff-merges=on will be using. The default is "separate".
t4013: add the following tests for log.diffMerges config:
* Test that wrong values are denied.
* Test that the value of log.diffMerges properly affects both
--diff-merges=on and -m.
t9902: fix completion tests for log.d* to match log.diffMerges.
Added documentation for log.diffMerges.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
As noted in previous commits we are removing the use of
GIT_TEST_GETTEXT_POISON=false. These tests all relied on the facility
being off, it always is off after an earlier change, but we hadn't
removed the redundant assignments to "false" in the tests.
I'm preserving the deletion of "error" lines in 38b9197a76 (t5411:
add basic test cases for proc-receive hook, 2020-08-27), it turns out
that's useful even without GIT_TEST_GETTEXT_POISON=true in
play. Update a comment added in that commit to note that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When __git_complete was introduced, it was meant to be temporarily, while
a proper guideline for public shell functions was established
(tentatively _GIT_complete), but since that never happened, people
in the wild started to use __git_complete, even though it was marked as
not public.
Eight years is more than enough wait, let's mark this function as
public, and make it a bit more user-friendly.
So that instead of doing:
__git_complete gk __gitk_main
The user can do:
__git_complete gk gitk
And instead of:
__git_complete gf _git_fetch
Do:
__git_complete gf git_fetch
Backwards compatibility is maintained.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the function was marked as not public, it's already used in
the wild.
We should at least test basic functionality.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8164360fc8 (t9902: prepare a test for the upcoming default branch
name, 2020-10-23), we started adjusting this test script for the default
initial branch name changing to `main`.
However, there is no need to wait for that: let's adjust the test script
to stop relying on a specific initial branch name by setting it
explicitly. This allows us to drop the `PREPARE_FOR_MAIN_BRANCH` prereq
from one test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to have recursive aliases like:
l = log --oneline
lg = l --graph
So the completion should detect such aliases as well.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust tests so that they won't scream when the default initial
branch name is changed to 'main'.
* js/default-branch-name-part-4-minus-1:
t1400: prepare for `main` being default branch name
tests: prepare aligned mentions of the default branch name
t9902: prepare a test for the upcoming default branch name
t3200: prepare for `main` being shorter than `master`
t5703: adjust a test case for the upcoming default branch name
t6200: adjust suppression pattern to also match "main"
tests: start moving to a different default main branch name
t9801: use `--` in preparation for default branch rename
fmt-merge-msg: also suppress "into main" by default
We need to adjust a test that uses a prefix of the default branch name,
to accommodate for `main` being used soon.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behavior of git checkout/switch is that --guess is currently
enabled by default. However, some users may not wish for this to happen
automatically. Instead of forcing users to specify --no-guess manually
each time, teach these commands the checkout.guess configuration
variable that gives users the option to set a default behavior.
Teach the completion script to recognize the new config variable and
disable DWIM logic if it is set to false.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion tests used that name unnecessarily, and it is a
non-inclusive term, so let's avoid using it here.
Since three of the touched test cases make use of the fact that two of
the branch names (`master` and `maint`) start with the same letter (or
even with the same two letters), we choose to replace the use of
`master` by a name that also has that property: `main`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation and some tests have been adjusted for the recent
renaming of "pu" branch to "seen".
* js/pu-to-seen:
tests: reference `seen` wherever `pu` was referenced
docs: adjust the technical overview for the rename `pu` -> `seen`
docs: adjust for the recent rename of `pu` to `seen`
As our test suite partially reflects how we work in the Git project, it
is natural that the branch name `pu` was used in a couple places.
Since that branch was renamed to `seen`, let's use the new name
consistently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --orphan option is used to create a local branch which is detached
from the current history. In git switch, it always resets to the empty
tree, and thus the only completion we can provide is a branch name.
Follow the same rules for -c/-C (and -b/-B) when completing the argument
to --orphan.
In the case of git switch, after we complete the argument, there is
nothing more we can complete for git switch, so do not even try. Nothing
else would be valid.
In the case of git checkout, --orphan takes a start point which it uses
to determine the checked out tree, even though it created orphaned
history.
Update the previously added test cases as they are now passing.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit added several test cases highlighting the subpar
completion logic for -c/-C and -b/-B when completing git switch and git
checkout.
In order to distinguish completing the argument vs the start-point for
this option, we now use the wordlist to determine the previous full word
on the command line.
If it's -c or -C (-b/-B for checkout), then we know that we are
completing the argument for the branch name.
Given that a user who already knows the branch name they want to
complete will simply not use completion, it makes sense to complete the
small subset of local branches when completing the argument for -c/-C.
In all other cases, if -c/-C are on the command line but are not the
most recent option, then we must be completing a start-point, and should
allow completing against all references.
Update the -c/-C and -b/-B tests to indicate they now pass.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current completion for the --track option of git switch and git checkout
is sub par. In addition to the DWIM logic of a bare branch name, --track
has DWIM logic to convert specified remote/branch names into a local
branch tracking that remote. For example
$git switch --track origin/master
This will create a local branch name master, that tracks the master
branch of the origin remote.
In fact, git switch --track on its own will not accept other forms of
references. These must instead be specified manually via the -c/-C/-b/-B
options.
Introduce __git_remote_heads() and the "remote-heads" mode for
__git_complete_refs. Use this when the --track option is provided while
completing in _git_switch and _git_checkout. Just as in the --detach
case, we never enable DWIM mode for --track, because it doesn't make
sense.
It should be noted that completion support is still a bit sub par when
it comes to handling -c/-C and --orphan. This will be resolved in
a future change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like git switch, we should not complete DWIM remote branch names
if --detach has been specified. To avoid this, refactor _git_checkout in
a similar way to _git_switch.
Note that we don't simply clear dwim_opt when we find -d or --detach, as
we will be adding other modes and checks, making this flow easier to
follow.
Update the previously failing tests to show that the breakage has been
resolved.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new --mode option to __git_complete_refs, which allows changing
the behavior to call __git_heads instead of __git_refs.
By passing --mode=heads, __git_complete_refs will only output local
branches. This enables using "--mode=heads --dwim" to enable listing
local branches and the remote unique branch names for DWIM.
Refactor completion support to use the new mode option, rather than
calling __git_heads directly. This has the advantage that we can now
correctly allow local branches along with suitable DWIM refs, rather
than only allowing DWIM when we complete all references.
Choose what mode it uses when calling __git_complete_refs. If -d or
--detach have been provided, then simply complete all refs, but
*without* the DWIM option as these DWIM names won't work properly in
--detach mode.
Otherwise, call __git_complete_refs with the default dwim_opt value and
use the new "heads" mode.
In this way, the basic support for completing just "git switch <TAB>"
will result in only local branches and remote unique names for DWIM.
The basic no-options tests for git switch, as well as several of the
-c/-C tests now pass, so remove the known breakage tags.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new helper, __git_find_last_on_cmdline is introduced, similar to the
already existing __git_find_on_cmdline, but which operates in reverse,
finding the *last* matching word of the provided wordlist.
Use this in a new __git_checkout_default_dwim_mode() function that will
determine when to enable listing of DWIM remote branches.
The __git_find_last_on_cmdline() function is used to determine which
--guess or --no-guess is in effect. If either one is provided, then we
unconditionally enable or disable the DWIM mode based on the last
provided option.
If neither --guess nor --no-guess is provided, then we check for
--no-track, and finally for GIT_COMPLETION_CHECKOUT_NO_GUESS=1.
This function is then used in _git_switch and _git_checkout to improve
the handling for when we enable listing of these DWIM remote branches.
This new logic is more robust, as we will correctly identify superseded
options, and ensure that both _git_switch and _git_checkout enable DWIM
in similar ways.
We can now update a few tests to indicate they pass. A few of the tests
previously added to highlight issues with the old DWIM logic still fail.
This is because of a separate issue related to the default completion
behavior of git switch, which will be addressed in a future change.
Additionally, due to this change, a few tests for the -b/-B handling of
git checkout now fail. This is a minor regression, and will be fixed by
a following change that improves the overall handling of -b/-B. Mark
these tests as known breakages for now.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to -c/-C, --orphan takes an argument which is the branch name to
use. We ought to complete this branch name using similar rules as to how
we complete new branch names for -c/-C and -b/-B. Namely, limit the
total number of options provided by completing to the local branches.
Additionally, git switch --orphan does not take any start point and will
always create using the empty-tree. Thus, after the branch name is
completed, git switch --orphan should not complete any references.
Add test cases showing the expected behavior of --orphan, for both the
argument and starting point.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the branch creation argument for git switch or git checkout
(-c/-C or -b/-B), the commands switch to a different mode: `git switch
-c <branch> <some-referance>` means to create a branch named <branch> at
the commit referred to by <some-reference>.
When completing git switch or git checkout, it makes sense to complete
the branch name differently from the start point.
When completing a branch, one might consider that we do not have
anything worth completing. After all, a new branch must have an entirely
new name. Consider, however, that if a user names branches using some
similar scheme, they might wish to name a new branch by modifying the
name of an existing branch.
To avoid overloading completion for the argument, it seems reasonable to
complete only the local branch names and the valid "Do What I Mean"
remote branch names.
Add tests for the completion of the argument to -c/-C and -b/-B,
highlighting this preferred completion behavior.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the branch creation argument for git switch or git checkout,
-c/-C or -b/-B, the commands operate in a different mode: `git switch -c
<branch> <some-reference>` means to create a branch named <branch> at
the commit referred to by <some-reference>.
When completing the start-point, we ought to always complete all valid
references.
Add tests for the completion of the start-point to -c/-C and -b/-B.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the --track option is provided to git switch or git checkout, and
no branch is specified by -c or -b, git will interpret the tracking
branch to determine the local branch name to use. This "Do What I Mean"
logic is similar but distinct from the default DWIM logic of
interpreting a unique remote branch name as a request to create and
track that branch.
For example, `git switch --track origin/master` is interpreted as
a request to create a local branch named master that is tracking
origin/master.
The current completion for git checkout in this regard is only somewhat
poor:
$git checkout --track <TAB>
HEAD
master
matching-branch
matching-tag
other/branch-in-other
other/master-in-other
At least it still includes remote references. The clutter from including
all references isn't too bad.
However, git switch completion is terrible:
$git switch --track <TAB>
master
matching-branch
It only shows local branches, not even allowing any form of completion
of the remote references!
Add tests which highlight the expected behavior of completing --track on
its own.
Note that when -c/-C or -b/-B are provided we do expect completing more
references, but this will be discussed in a future change that addresses
these options specifically.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
