Commit graph

5 commits

Author SHA1 Message Date
Johannes Schindelin
3ac8f6301e t55[23]*: adjust the references to the default branch name "main"
Carefully excluding t5526, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t55[23]*. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -e 's/naster/nain/g' -- \
		t55[23]*.sh &&
	   git checkout HEAD -- t5526\*)

Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.

This commit allows us to define
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for that range of tests.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:18 -08:00
Johannes Schindelin
334afbc76f tests: mark tests relying on the current default for init.defaultBranch
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.

To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in

- all test scripts that contain the keyword `master`,

- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
  initialize the default branch,

- t5560 because it sources `t/t556x_common` which uses `master`,

- t8002 and t8012 because both source `t/annotate-tests.sh` which also
  uses `master`)

This trick was performed by this command:

	$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' $(git grep -l master t/t[0-9]*.sh) \
	t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh

After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:

	$ git checkout HEAD -- \
		t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
		t/t1011-read-tree-sparse-checkout.sh \
		t/t1305-config-include.sh t/t1309-early-config.sh \
		t/t1402-check-ref-format.sh t/t1450-fsck.sh \
		t/t2024-checkout-dwim.sh \
		t/t2106-update-index-assume-unchanged.sh \
		t/t3040-subprojects-basic.sh t/t3301-notes.sh \
		t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
		t/t3436-rebase-more-options.sh \
		t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
		t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
		t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
		t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
		t/t5548-push-porcelain.sh \
		t/t5552-skipping-fetch-negotiator.sh \
		t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
		t/t5614-clone-submodules-shallow.sh \
		t/t7508-status.sh t/t7606-merge-custom.sh \
		t/t9302-fast-import-unpack-limit.sh

We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:

	$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' t/t980[0167]*.sh t/t9811*.sh

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:17 -08:00
brian m. carlson
8125a58b91 t: switch $_z40 to $ZERO_OID
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes.  This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:

  sed -i 's/\$_z40/$ZERO_OID/g'

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-14 11:02:00 +09:00
Jeff King
8e9faf27c1 pkt-line: allow writing of LARGE_PACKET_MAX buffers
When we send out pkt-lines with refnames, we use a static
1000-byte buffer. This means that the maximum size of a ref
over the git protocol is around 950 bytes (the exact size
depends on the protocol line being written, but figure on a sha1
plus some boilerplate).

This is enough for any sane workflow, but occasionally odd
things happen (e.g., a bug may create a ref "foo/foo/foo/..."
accidentally).  With the current code, you cannot even use
"push" to delete such a ref from a remote.

Let's switch to using a strbuf, with a hard-limit of
LARGE_PACKET_MAX (which is specified by the protocol).  This
matches the size of the readers, as of 74543a0 (pkt-line:
provide a LARGE_PACKET_MAX static buffer, 2013-02-20).
Versions of git older than that will complain about our
large packets, but it's really no worse than the current
behavior. Right now the sender barfs with "impossibly long
line" trying to send the packet, and afterwards the reader
will barf with "protocol error: bad line length %d", which
is arguably better anyway.

Note that we're not really _solving_ the problem here, but
just bumping the limits. In theory, the length of a ref is
unbounded, and pkt-line can only represent sizes up to
65531 bytes. So we are just bumping the limit, not removing
it.  But hopefully 64K should be enough for anyone.

As a bonus, by using a strbuf for the formatting we can
eliminate an unnecessary copy in format_buf_write.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-10 13:09:21 -08:00
Jeff King
1e7ba0f9ca fetch-pack: match refs exactly
When we are determining the list of refs to fetch via
fetch-pack, we have two sets of refs to compare: those on
the remote side, and a "match" list of things we want to
fetch. We iterate through the remote refs alphabetically,
seeing if each one is wanted by the "match" list.

Since def88e9 (Commit first cut at "git-fetch-pack",
2005-07-04), we have used the "path_match" function to do a
suffix match, where a remote ref is considered wanted if
any of the "match" elements is a suffix of the remote
refname.

This enables callers of fetch-pack to specify unqualified
refs and have them matched up with remote refs (e.g., ask
for "A" and get remote's "refs/heads/A"). However, if you
provide a fully qualified ref, then there are corner cases
where we provide the wrong answer. For example, given a
remote with two refs:

   refs/foo/refs/heads/master
   refs/heads/master

asking for "refs/heads/master" will first match
"refs/foo/refs/heads/master" by the suffix rule, and we will
erroneously fetch it instead of refs/heads/master.

As it turns out, all callers of fetch_pack do provide
fully-qualified refs for the match list. There are two ways
fetch_pack can get match lists:

  1. Through the transport code (i.e., via git-fetch)

  2. On the command-line of git-fetch-pack

In the first case, we will always be providing the names of
fully-qualified refs from "struct ref" objects. We will have
pre-matched those ref objects already (since we have to
handle more advanced matching, like wildcard refspecs), and
are just providing a list of the refs whose objects we need.

In the second case, users could in theory be providing
non-qualified refs on the command-line. However, the
fetch-pack documentation claims that refs should be fully
qualified (and has always done so since it was written in
2005).

Let's change this path_match call to simply check for string
equality, matching what the callers of fetch_pack are
expecting.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-13 10:17:50 -08:00