Commit graph

16 commits

Author SHA1 Message Date
Taylor Blau
478a426f14 Sync with 2.33.5
Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-10-06 17:42:55 -04:00
Taylor Blau
122512967e Sync with 2.30.6
Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-10-06 17:39:15 -04:00
Taylor Blau
ac7e57fa28 t/t4NNN: allow local submodules
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.

Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.

Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-10-01 00:23:38 -04:00
David Turner
f1c0368da4 diff --submodule=diff: do not fail on ever-initialied deleted submodules
If you have ever initialized a submodule, open_submodule will open it.
If you then delete the submodule's worktree directory (but don't
remove it from .gitmodules), git diff --submodule=diff would error out
as it attempted to chdir into the now-deleted working tree directory.

This only matters if the submodules git dir is absorbed.  If not, then
we no longer have anywhere to run the diff.  But that case does not
trigger this error, because in that case, open_submodule fails, so we
don't resolve a left commit, so we exit early, which is the only thing
we could do.

If absorbed, then we can run the diff from the submodule's absorbed
git dir (.git/modules/sm2).  In practice, that's a bit more
complicated, because `git diff` expects to be run from inside a
working directory, not a git dir.  So it looks in the config for
core.worktree, and does chdir("../../../sm2"), which is the very dir
that we're trying to avoid visiting because it's been deleted.  We
work around this by setting GIT_WORK_TREE (and GIT_DIR) to ".".  It is
little weird to set GIT_WORK_TREE to something that is not a working
tree just to avoid an unnecessary chdir, but it works.

Signed-off-by: David Turner <dturner@twosigma.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-31 10:11:48 -07:00
David Turner
4577d26dc0 t4060: remove unused variable
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-26 15:35:54 -07:00
Sangeeta Jain
8ef9312464 diff: do not show submodule with untracked files as "-dirty"
Git diff reports a submodule directory as -dirty even when there are
only untracked files in the submodule directory. This is inconsistent
with what `git describe --dirty` says when run in the submodule
directory in that state.

Make `--ignore-submodules=untracked` the default for `git diff` when
there is no configuration variable or command line option, so that the
command would not give '-dirty' suffix to a submodule whose working
tree has untracked files, to make it consistent with `git
describe --dirty` that is run in the submodule working tree.

And also make `--ignore-submodules=none` the default for `git status`
so that the user doesn't end up deleting a submodule that has
uncommitted (untracked) files.

Signed-off-by: Sangeeta Jain <sangunb09@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-12-08 14:27:35 -08:00
brian m. carlson
417e45e5e3 t4060: make test work with SHA-256
In this test, there are two main types of object IDs we see in the
diffs: the ones for the submodules, which we care about, and the ones
for the individual files, which are unrelated to what we're testing.
Much of the test already computes the former, so extend the rest of the
test to do so as well.  Add a diff comparison function that normalizes
the differences in the latter, since they're not explicitly what we're
testing.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-07 11:07:30 -08:00
Junio C Hamano
986c518107 Merge branch 'sg/test-must-be-empty'
Test fixes.

* sg/test-must-be-empty:
  tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
  tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
  tests: use 'test_must_be_empty' instead of 'test ! -s'
  tests: use 'test_must_be_empty' instead of '! test -s'
2018-08-27 14:33:43 -07:00
SZEDER Gábor
1c5e94f459 tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
Using 'test_must_be_empty' is shorter and more idiomatic than

  >empty &&
  test_cmp empty out

as it saves the creation of an empty file.  Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).

These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.

Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:

  - Sometimes the expected output is not hard-coded in the test, but
    'test_cmp' is used to ensure that two similar git commands produce
    the same output, and that output happens to be empty, e.g. the
    test 'submodule update --merge  - ignores --merge  for new
    submodules' in 't7406-submodule-update.sh'.

  - Repetitive common tasks, including preparing the expected results
    and running 'test_cmp', are often extracted into a helper
    function, and some of this helper's callsites expect no output.

  - For the same reason as above, the whole 'test_expect_success'
    block is within a helper function, e.g. in 't3070-wildmatch.sh'.

  - Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
    (-p)' in 't9400-git-cvsserver-server.sh'.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-21 11:48:36 -07:00
SZEDER Gábor
ec10b018e7 tests: use 'test_must_be_empty' instead of '! test -s'
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent.  Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.

This patch was basically created by:

  sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh

with the following notable exceptions:

  - The '! test -s' check in '.gitmodules ignore=dirty suppresses
    submodules with untracked content' in 't7508-status.sh' is left
    as-is, because it's bogus and, therefore, it's subject of a
    dedicated patch.

  - The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
    't9135-git-svn-moved-branch-empty-file.sh' are immediately
    preceeded by a 'test -f' to ensure that the files exist in the
    first place.  'test_must_be_empty' ensures that as well, so those
    'test -f' commands are removed as well.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-21 11:48:29 -07:00
Eric Sunshine
f957f03b60 t4000-t4999: fix broken &&-chains
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16 14:38:47 -07:00
Jeff King
17f2f88c9c t: move "git add submodule" into test blocks
Some submodule tests do some setup outside of a test_expect
block. This is bad because we won't actually check the
outcome of those commands. But it's doubly so because "git
add submodule" now produces a warning to stderr, which is
not suppressed by the test scripts in non-verbose mode.

This patch does the minimal to fix the annoying warnings.
All three of these scripts could use more cleanup of related
setup.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15 09:10:47 -07:00
Junio C Hamano
a531ecf399 Merge branch 'jk/diff-submodule-diff-inline'
"git diff --submodule=diff" now recurses into nested submodules.

* jk/diff-submodule-diff-inline:
  diff: recurse into nested submodules for inline diff
2017-05-29 12:34:42 +09:00
Stefan Beller
5a5221427c diff: recurse into nested submodules for inline diff
When fd47ae6a5b (diff: teach diff to display submodule difference with an
inline diff, 2016-08-31) was introduced, we did not think of recursing
into nested submodules.

When showing the inline diff for submodules, automatically recurse
into nested submodules as well with inline submodule diffs.

Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08 09:44:54 +09:00
Stefan Beller
17b254cda6 diff: submodule inline diff to initialize env array.
David reported:
> When I try to run `git diff --submodule=diff` in a submodule which has
> it's own submodules that have changes I get the error: fatal: bad
> object.

This happens, because we do not properly initialize the environment
in which the diff is run in the submodule. That means we inherit the
environment from the main process, which sets environment variables.
(Apparently we do set environment variables which we do not set
when not in a submodules, i.e. the .git directory is linked)

This commit, just like fd47ae6a5b (diff: teach diff to display
submodule difference with an inline diff, 2016-08-31) introduces bad
test code (i.e. hard coded hash values), which will be cleanup up in
a later patch.

Reported-by: David Parrish <daveparrish@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-02 09:51:03 -07:00
Jacob Keller
fd47ae6a5b diff: teach diff to display submodule difference with an inline diff
Teach git-diff and friends a new format for displaying the difference
of a submodule. The new format is an inline diff of the contents of the
submodule between the commit range of the update. This allows the user
to see the actual code change caused by a submodule update.

Add tests for the new format and option.

Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-31 18:07:10 -07:00