Commit graph

23 commits

Author SHA1 Message Date
Ævar Arnfjörð Bjarmason
16d4bd4f14 leak tests: mark some diff tests as passing with SANITIZE=leak
Mark some tests that match "*diff*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-11-01 11:23:08 -07:00
Ævar Arnfjörð Bjarmason
47c88d16ba test-lib functions: add --printf option to test_commit
Add a --printf option to test_commit to allow writing to the file with
"printf" instead of "echo".

This is useful for writing "\n", "\0" etc., in particular in
combination with the --append option added in 3373518cc8 (test-lib
functions: add an --append option to test_commit, 2021-01-12).

I'm converting a few tests to use the new option rather than a manual
printf/add/commit combination to demonstrate its usefulness. While I'm
at it use "test_create_repo" where appropriate, and give the
first/second commit a meaningful/more conventional log message in
cases where no test cared about that message.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-05-11 12:45:18 +09:00
Ævar Arnfjörð Bjarmason
1108cea7f8 tests: remove most uses of test_i18ncmp
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.

I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-02-10 23:48:27 -08:00
Jeff King
426fd36f4a t4006: resurrect commented-out tests
This set of tests was added by 4434e6ba6c (tests: check --[short]stat
output after chmod, 2012-05-01), and is primarily about the handling of
binary versus text files.

Later, 74faaa16f0 (Fix "git diff --stat" for interesting - but empty -
file changes, 2012-10-17) changed the stat output so that the empty text
file is mentioned rather than omitted. That commit just comments out
these tests. There's no discussion in the commit message, but the
original email[1] says:

  NOTE! This does break two of our tests, so we clearly did this on
  purpose, or at least tested for it. I just uncommented the subtests
  that this makes irrelevant, and changed the output of another one.

I don't think they're irrelevant, though. We should be testing this
"mode change only" case and making sure that it has the post-74faaa16f0
behavior. So this commit brings back those tests, with the current
expected output.

[1] https://public-inbox.org/git/CA+55aFz88GPJcfMSqiyY+u0Cdm48bEyrsTGxHVJbGsYsDg=Q5w@mail.gmail.com/

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-24 11:58:38 -08:00
brian m. carlson
2ece6ad281 t: switch $_x40 to $OID_REGEX
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with
larger hashes.  This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:

  sed -i 's/\$_x40/$OID_REGEX/g'

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-14 11:02:01 +09:00
Elia Pinto
e1d6b55d5d t4006-diff-mode.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.

The backquoted form is the traditional method for command
substitution, and is supported by POSIX.  However, all but the
simplest uses become complicated quickly.  In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.

The patch was generated by:

for _f in $(find . -name "*.sh")
do
   sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done

and then carefully proof-read.

Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-30 11:08:04 -07:00
Linus Torvalds
74faaa16f0 Fix "git diff --stat" for interesting - but empty - file changes
The behavior of "git diff --stat" is rather odd for files that have
zero lines of changes: it will discount them entirely unless they were
renames.

Which means that the stat output will simply not show files that only
had "other" changes: they were created or deleted, or their mode was
changed.

Now, those changes do show up in the summary, but so do renames, so
the diffstat logic is inconsistent. Why does it show renames with zero
lines changed, but not mode changes or added files with zero lines
changed?

So change the logic to not check for "is_renamed", but for
"is_interesting" instead, where "interesting" is judged to be any
action but a pure data change (because a pure data change with zero
data changed really isn't worth showing, if we ever get one in our
diffpairs).

So if you did

   chmod +x Makefile
   git diff --stat

before, it would show empty (" 0 files changed"), with this it shows

 Makefile | 0
 1 file changed, 0 insertions(+), 0 deletions(-)

which I think is a more correct diffstat (and then with "--summary" it
shows *what* the metadata change to Makefile was - this is completely
consistent with our handling of renamed files).

Side note: the old behavior was *really* odd. With no changes at all,
"git diff --stat" output was empty. With just a chmod, it said "0
files changed". No way is our legacy behavior sane.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-17 11:50:50 -07:00
Jiang Xin
b354f11b59 Fix tests under GETTEXT_POISON on diffstat
Use the i18n-specific test functions in test scripts for diffstat.
This issue was was introduced in v1.7.9-1-g7f814:

    7f814 Use correct grammar in diffstat summary line

and been broken under GETTEXT_POISON=YesPlease since.

Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 09:26:30 -07:00
Johannes Sixt
9380aed286 t4006: Windows do not have /dev/zero
We only need to have a file with _some_ binary contents; be nice to
our Windows friends and avoid using /dev/zero

Signed-off-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-02 09:46:41 -07:00
Zbigniew Jędrzejewski-Szmek
e18872b2f0 diff --stat: report mode-only changes for binary files like text files
Mode-only changes to binary files without content change were reported as
if they were rewritten, but text files in the same situation were reported
as "unchanged". Let's treat binary files like text files here, and simply
say that they are unchanged.

Output of --shortstat is modified in the same way.

Reported-by: Martin Mareš <mj@ucw.cz>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 21:26:46 -07:00
Zbigniew Jędrzejewski-Szmek
4434e6ba6c tests: check --[short]stat output after chmod
Add a test to check 'diff --stat' output with a text file after chmod,
and the same for a binary file. This demonstrates that text and binary
files are treated differently, which can be misleading.

While at it, add tests to check --shortstat output, too.

Reported-by: Martin Mareš <mj@ucw.cz>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 11:02:12 -07:00
Zbigniew Jędrzejewski-Szmek
ec57a821a3 test: modernize style of t4006
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 11:01:47 -07:00
Junio C Hamano
cd3c095caa tests: move convenience regexp to match object names to test-lib.sh
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-03 21:17:16 -08:00
Johannes Sixt
1f553918a8 test-lib: Introduce test_chmod and use it instead of update-index --chmod
This function replaces sequences of 'chmod +x' and 'git update-index
--chmod=+x' in the test suite, whose purpose is to help filesystems
that need core.filemode=false. Two places where only 'chmod +x' was used
we also use this new function.

The function calls 'git update-index --chmod' without checking
core.filemode (unlike some of the call sites did). We do this because the
call sites *expect* that the executable bit ends up in the index (ie. it
is not the purpose of the call sites to *test* whether git treats
'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on
filesystems with core.filemode=true the 'git update-index --chmod' is a
no-op.

The function uses --add with update-index to help one call site in
t6031-merge-recursive. It makes no difference for the other callers.

Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-19 21:47:14 +01:00
Junio C Hamano
3af828634f tests: do not use implicit "git diff --no-index"
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done.  We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".

Rather use test_cmp for that purpose.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24 00:01:56 -07:00
Junio C Hamano
5be60078c9 Rewrite "git-frotz" to "git frotz"
This uses the remove-dashes target to replace "git-frotz" to "git frotz".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02 22:52:14 -07:00
Junio C Hamano
a6080a0a44 War on whitespace
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time.  There are a few files that need
to have trailing whitespaces (most notably, test vectors).  The results
still passes the test, and build result in Documentation/ area is unchanged.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07 00:04:01 -07:00
Johannes Schindelin
5bd74506cd Get rid of the dependency to GNU diff in the tests
Now that "git diff" handles stdin and relative paths outside the
working tree correctly, we can convert all instances of "diff -u"
to "git diff".

This commit is really the result of

$ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/)

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>

(cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
2007-03-04 00:24:15 -08:00
Tom Prince
e0d10e1c63 [PATCH] Rename git-repo-config to git-config.
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28 16:16:53 -08:00
Alex Riesen
b484ef28fb trivial: use git-repo-config to detect how to run tests in the test repository
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-05 17:23:46 -08:00
Junio C Hamano
215a7ad1ef Big tool rename.
As promised, this is the "big tool rename" patch.  The primary differences
since 0.99.6 are:

  (1) git-*-script are no more.  The commands installed do not
      have any such suffix so users do not have to remember if
      something is implemented as a shell script or not.

  (2) Many command names with 'cache' in them are renamed with
      'index' if that is what they mean.

There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support  is expected to be removed in the near
future.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07 17:45:20 -07:00
Junio C Hamano
2bbcddee87 Adjust diff-raw tests to the status letter change.
We use 'A' for added files instead of 'N' to make the it
visually easier to distinguish from 'M' now.

While we are at it, make the test scripts executable.  Yes, I
know it does not matter because t/Makefile runs them explicitly
with "sh tXXXX-blah.sh", but being consistent is always better.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-26 00:22:43 -07:00
Junio C Hamano
9fdade0673 [PATCH] Mode only changes from diff.
This fixes another bug.

 - Mode-only changes were pruned incorrectly from the output.
 - Added test to catch the above problem.
 - Normalize rename/copy similarity score in the diff-raw output
   to per-cent, no matter what scale we internally use.

Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-25 16:06:24 -07:00