Commit graph

5 commits

Author SHA1 Message Date
Johannes Schindelin
06d531486e t[01]*: adjust the references to the default branch name "main"
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via

	$ (cd t &&
	   sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
		-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
	   git checkout HEAD -- t1309\*)

Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.

This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.

Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:18 -08:00
Johannes Schindelin
334afbc76f tests: mark tests relying on the current default for init.defaultBranch
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.

To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in

- all test scripts that contain the keyword `master`,

- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
  initialize the default branch,

- t5560 because it sources `t/t556x_common` which uses `master`,

- t8002 and t8012 because both source `t/annotate-tests.sh` which also
  uses `master`)

This trick was performed by this command:

	$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' $(git grep -l master t/t[0-9]*.sh) \
	t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh

After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:

	$ git checkout HEAD -- \
		t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
		t/t1011-read-tree-sparse-checkout.sh \
		t/t1305-config-include.sh t/t1309-early-config.sh \
		t/t1402-check-ref-format.sh t/t1450-fsck.sh \
		t/t2024-checkout-dwim.sh \
		t/t2106-update-index-assume-unchanged.sh \
		t/t3040-subprojects-basic.sh t/t3301-notes.sh \
		t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
		t/t3436-rebase-more-options.sh \
		t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
		t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
		t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
		t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
		t/t5548-push-porcelain.sh \
		t/t5552-skipping-fetch-negotiator.sh \
		t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
		t/t5614-clone-submodules-shallow.sh \
		t/t7508-status.sh t/t7606-merge-custom.sh \
		t/t9302-fast-import-unpack-limit.sh

We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:

	$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
	GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
	export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
	' t/t980[0167]*.sh t/t9811*.sh

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19 15:44:17 -08:00
Ævar Arnfjörð Bjarmason
244ea1b5e4 rev-parse: match @{upstream}, @{u} and @{push} case-insensitively
Change the revision parsing logic to match @{upstream}, @{u} & @{push}
case-insensitively.

Before this change supplying anything except the lower-case forms
emits an "unknown revision or path not in the working tree"
error. This change makes upper-case & mixed-case versions equivalent
to the lower-case versions.

The use-case for this is being able to hold the shift key down while
typing @{u} on certain keyboard layouts, which makes the sequence
easier to type, and reduces cases where git throws an error at the
user where it could do what he means instead.

These suffixes now join various other suffixes & special syntax
documented in gitrevisions(7) that matches case-insensitively. A table
showing the status of the various forms documented there before &
after this patch is shown below. The key for the table is:

 - CI  = Case Insensitive
 - CIP = Case Insensitive Possible (without ambiguities)
 - AG  = Accepts Garbage (.e.g. @{./.4.minutes./.})

Before this change:

    |----------------+-----+------+-----|
    | What?          | CI? | CIP? | AG? |
    |----------------+-----+------+-----|
    | @{<date>}      | Y   | Y    | Y   |
    | @{upstream}    | N   | Y    | N   |
    | @{push}        | N   | Y    | N   |
    |----------------+-----+------+-----|

After it:

    |----------------+-----+------+-----|
    | What?          | CI? | CIP? | AG? |
    |----------------+-----+------+-----|
    | @{<date>}      | Y   | Y    | Y   |
    | @{upstream}    | Y   | Y    | N   |
    | @{push}        | Y   | Y    | N   |
    |----------------+-----+------+-----|

The ^{<type>} suffix is not made case-insensitive, because other
places that take <type> like "cat-file -t <type>" do want them case
sensitively (after all we never declared that type names are case
insensitive). Allowing case-insensitive typename only with this syntax
will make the resulting Git as a whole inconsistent.

This change was independently authored to scratch a longtime itch, but
when I was about to submit it I discovered that a similar patch had
been submitted unsuccessfully before by Conrad Irwin in August 2011 as
"rev-parse: Allow @{U} as a synonym for
@{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>).

The tests for this patch are more exhaustive than in the 2011
submission. The starting point for them was to first change the code
to only support upper-case versions of the existing words, seeing what
broke, and amending the breaking tests to check upper case & mixed
case as appropriate, and where not redundant to other similar
tests. The implementation itself is equivalent.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-27 10:45:44 -07:00
Kyle Meyer
b10731f43d branch_get_push: do not segfault when HEAD is detached
Move the detached HEAD check from branch_get_push_1() to
branch_get_push() to avoid setting branch->push_tracking_ref when
branch is NULL.

Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-07 19:20:07 -08:00
Jeff King
adfe5d0434 sha1_name: implement @{push} shorthand
In a triangular workflow, each branch may have two distinct
points of interest: the @{upstream} that you normally pull
from, and the destination that you normally push to. There
isn't a shorthand for the latter, but it's useful to have.

For instance, you may want to know which commits you haven't
pushed yet:

  git log @{push}..

Or as a more complicated example, imagine that you normally
pull changes from origin/master (which you set as your
@{upstream}), and push changes to your own personal fork
(e.g., as myfork/topic). You may push to your fork from
multiple machines, requiring you to integrate the changes
from the push destination, rather than upstream. With this
patch, you can just do:

  git rebase @{push}

rather than typing out the full name.

The heavy lifting is all done by branch_get_push; here we
just wire it up to the "@{push}" syntax.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-22 09:33:08 -07:00