Commit graph

10 commits

Author SHA1 Message Date
Elijah Newren
b338e9f668 ls-files: error out on -i unless -o or -c are specified
ls-files --ignored can be used together with either --others or
--cached.  After being perplexed for a bit and digging in to the code, I
assumed that ls-files -i was just broken and not printing anything and
I had a nice patch ready to submit when I finally realized that -i can be
used with --cached to find tracked ignores.

While that was a mistake on my part, and a careful reading of the
documentation could have made this more clear, I suspect this is an
error others are likely to make as well.  In fact, of two uses in our
testsuite, I believe one of the two did make this error.  In t1306.13,
there are NO tracked files, and all the excludes built up and used in
that test and in previous tests thus have to be about untracked files.
However, since they were looking for an empty result, the mistake went
unnoticed as their erroneous command also just happened to give an empty
answer.

-i will most the time be used with -o, which would suggest we could just
make -i imply -o in the absence of either a -o or -c, but that would be
a backward incompatible break.  Instead, let's just flag -i without
either a -o or -c as an error, and update the two relevant testcases to
specify their intent.

Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-05-13 08:45:03 +09:00
Denton Liu
3595d10c26 t1306: convert test_might_fail rm to rm -f
The test_must_fail() family of functions (including test_might_fail())
should only be used on git commands. Replace `test_might_fail rm` with
`rm -f` so that we don't use `test_might_fail` on a non-git command.

Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-20 11:30:44 -08:00
Ævar Arnfjörð Bjarmason
d3c6751b18 tests: make use of the test_must_be_empty function
Change various tests that use an idiom of the form:

    >expect &&
    test_cmp expect actual

To instead use:

    test_must_be_empty actual

The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:

    git grep '^\s+>.*expect.* &&$' t

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30 11:18:41 -07:00
Jeff King
22ae029a1e t1306: check that XDG_CONFIG_HOME works
This should override $HOME/.config, but we never actually tested it.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-24 08:59:07 -07:00
Matthieu Moy
6283a376c4 ignore: make sure we have an xdg path before using it
Commit e3ebc35 (config: fix several access(NULL) calls, 2012-07-12) was
fixing access(NULL) calls when trying to access $HOME/.config/git/config,
but missed the ones when trying to access $HOME/.config/git/ignore. Fix
and test this.

Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-24 08:59:07 -07:00
Jeff King
f0c1c15c41 attr: make sure we have an xdg path before using it
If we don't have a core.attributesfile configured, we fall
back to checking XDG config, which is usually
$HOME/.config/git/attributes.

However, if $HOME is unset, then home_config_paths will return
NULL, and we end up calling fopen(NULL).

Depending on your system, this may or may not cause the
accompanying test to fail (e.g., on Linux and glibc, the
address will go straight to open, which will return EFAULT).
However, valgrind will reliably notice the error.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-24 08:59:07 -07:00
Huynh Khoi Nguyen Nguyen
0e8593dc5b config: write to $XDG_CONFIG_HOME/git/config file when appropriate
Teach git to write to $XDG_CONFIG_HOME/git/config if

 - it already exists,
 - $HOME/.gitconfig file doesn't, and
 - The --global option is used.

Otherwise, write to $HOME/.gitconfig when the --global option is
given, as before.

If the user doesn't create $XDG_CONFIG_HOME/git/config, there is
absolutely no change. Users can use this new file only if they want.

If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used.

Advice for users who often come back to an old version of Git: you
shouldn't create this file.

Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-25 09:06:15 -07:00
Huynh Khoi Nguyen Nguyen
684e40f657 Let core.attributesfile default to $XDG_CONFIG_HOME/git/attributes
This gives the default value for the core.attributesfile variable
following the exact same logic of the previous change for the
core.excludesfile setting.

Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-25 09:06:15 -07:00
Huynh Khoi Nguyen Nguyen
dc79687e0b Let core.excludesfile default to $XDG_CONFIG_HOME/git/ignore
To use the feature of core.excludesfile, the user needs:

 1. to create such a file,

 2. and add configuration variable to point at it.

Instead, we can make this a one-step process by choosing a default value
which points to a filename in the user's $HOME, that is unlikely to
already exist on the system, and only use the presence of the file as a
cue that the user wants to use that feature.

And we use "${XDG_CONFIG_HOME:-$HOME/.config/git}/ignore" as such a
file, in the same directory as the newly added configuration file
("${XDG_CONFIG_HOME:-$HOME/.config/git}/config).  The use of this
directory is in line with XDG specification as a location to store
such application specific files.

Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-25 09:06:15 -07:00
Huynh Khoi Nguyen Nguyen
21cf322791 config: read (but not write) from $XDG_CONFIG_HOME/git/config file
Teach git to read the "gitconfig" information from a new location,
$XDG_CONFIG_HOME/git/config; this allows the user to avoid
cluttering $HOME with many per-application configuration files.

In the order of reading, this file comes between the global
configuration file (typically $HOME/.gitconfig) and the system wide
configuration file (typically /etc/gitconfig).

We do not write to this new location (yet).

If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used. This is in line with XDG specification.

If the new file does not exist, the behavior is unchanged.

Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-25 09:05:55 -07:00