In pathinfo mode, we use <base href> that refers to the base location
of gitweb in order for various external media links to work well.
However, this means that for the page to refer to itself, it must
regenerate full link, and this is exactly what the blob view page
did not do for line numbers.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The custom CGI escaping done in esc_param failed to escape UTF-8
properly. Fix by using CGI::escape on each sequence of matched
characters instead of sprintf()ing a custom escaping for each byte.
Additionally, the space -> + escape was being escaped due to greedy
matching on the first substitution. Fix by adding space to the
list of characters not handled on the first substitution.
Finally, remove an unnecessary escaping of the + sign.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'patch' view is about generating text/plain patch that can be
given to "git am", and "git am" doesn't understand merges anyway.
Therefore link to 'patch' view should not be shown for merge commits.
Also call to git-format-patch inside the 'patch' action would fail
when 'patch' action is called for a merge commit, with "Reading
git-format-patch failed" text as 'patch' view body.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mr/gitweb-snapshot:
gitweb: add t9501 tests for checking HTTP status codes
gitweb: split test suite into library and tests
gitweb: improve snapshot error handling
* maint:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.3:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.2:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
Conflicts:
Documentation/git-archive.txt
The last check in the second block of checks in the &git_snapshot routine
is never executed because the second to last check is a superset of the
last check.
Switch the order of the last two checks. It has the advantage of giving
clients a more specific reason why they cannot get a snapshot format if
the format they have chosen is disabled.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mr/gitweb-xz:
gitweb: add support for XZ compressed snapshots
gitweb: update INSTALL regarding specific snapshot settings
gitweb: support to globally disable a snapshot format
Since 4afbaef (gitweb: ref markers link to named shortlogs, 2008-09-02),
ref markers that accompany the subject in views such as shortlog and
history point to something different from the subject itself. Therefore,
they should not be included in the same <a> element.
Benefits of the change are:
* better compliance to the XHTML standards, that forbid links within
links even though the restriction cannot be imposed via DTD; this also
benefits visualization in some older browsers;
* when hovering the subject, only the subject itself is underlined; when
hovering the ref markers, only the text in the hovered ref marker is
underlined; previously, hovering any written part of the subject column
led to complete underlying of everything at the same time, with
unpleasing effects.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce size of git-favicon.png using a combination of optipng and
pngout. From 164 bytes to 115 bytes (30% reduction). Also reduce
git-logo.png's size by one byte using advcomp.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jn/gitweb-blame' (early part):
gitweb: Use light/dark for class names also in 'blame' view
gitweb: Add author initials in 'blame' view, a la "git gui blame"
gitweb: Mark commits with no "previous" in 'blame' view
gitweb: Use "previous" header of git-blame -p in 'blame' view
gitweb: Mark boundary commits in 'blame' view
gitweb: Make .error style generic
The XZ compression format uses the LZMA2 compression algorithm, which
often yields higher compression ratios than both GZip and BZip2 at the
cost of using more CPU time and RAM. XZ is the slowest for compression,
but still much faster than BZip2 for decompression, almost comparable
to GZip (see benchmarks below).
Some simple benchmarks show the pros and cons of using XZ compression;
starting with an already tarball'd archive of the repos listed below.
Memory usage seemed to be consistent for any given algorithm at their
respective default compression levels.
CPU: AMD Sempron 3400+ (1 core @ 1.8GHz with 256K L2 cache)
Virtual Memory Usage
GZip: 4152K BZip2: 13352K XZ: 102M
Linux 2.6 series (f5886c7f96f2542382d3a983c5f13e03d7fc5259) 349M
gzip 23.70s user 0.47s system 99% cpu 24.227 total 76M
gunzip 3.74s user 0.74s system 94% cpu 4.741 total
bzip2 130.96s user 0.53s system 99% cpu 2:11.97 total 59M
bunzip2 31.05s user 1.02s system 99% cpu 32.355 total
xz 448.78s user 0.91s system 99% cpu 7:31.28 total 51M
unxz 7.67s user 0.80s system 98% cpu 8.607 total
Git (0a53e9ddea) 11M
gzip 0.77s user 0.03s system 99% cpu 0.792 total 2.5M
gunzip 0.12s user 0.02s system 98% cpu 0.142 total
bzip2 3.42s user 0.02s system 99% cpu 3.454 total 2.1M
bunzip2 0.95s user 0.03s system 99% cpu 0.984 total
xz 12.88s user 0.14s system 98% cpu 13.239 total 1.9M
unxz 0.27s user 0.03s system 99% cpu 0.298 total
XZ (669413bb2db954bbfde3c4542fddbbab53891eb4) 1.8M
gzip 0.12s user 0.00s system 95% cpu 0.132 total 442K
gunzip 0.02s user 0.00s system 97% cpu 0.027 total
bzip2 1.28s user 0.01s system 99% cpu 1.298 total 363K
bunzip2 0.15s user 0.01s system 100% cpu 0.157 total
xz 1.62s user 0.03s system 99% cpu 1.652 total 347K
unxz 0.05s user 0.00s system 99% cpu 0.058 total
From a time and memory perspective, nothing compares to GZip, but if
given an average upload speed of 20KB/s, it would take ~400 seconds
longer to transfer the BZip2'd kernel snapshot than the XZ snapshot;
the transfer time difference is even greater between GZip and XZ. The
real time savings are relatively the same for all test cases, but less
dramatic for smaller repositories.
XZ decompresses ~1.8-2 times slower than GZip, and ~2.7-3.75 times
faster than BZip2; XZ gets relatively faster as snapshots get larger.
However, XZ takes relatively longer to compress as snapshots get larger.
The downside for XZ'd snapshots is the large CPU and memory load put on
the server to generate the compressed snapshot, though XZ will
eventually
have threading support, and the real clock time for making XZ'd
snapshots
would decrease if the server had a beefy multi-core CPU.
XZ compression is disabled by default to allow upgrades to take place
without any surprises, as the CPU and memory requirements will be an
issue for high load or lightweight servers. Also, the XZ format is still
new (format declared stable ~6 months ago), and there have been no
"stable" releases of the utils yet.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes instructions on how to disable a snapshot format and how
to add options to a snapshot format (e.g. setting the compression
level).
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow Gitweb administrators to set a 'disabled' key in the
%known_snapshot_formats hash to disable a specific snapshot format.
All formats are enabled by default to maintain backwards compatibility.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call to_utf8 when parsing author and committer names, otherwise they will appear
with bad encoding if they written by using chop_and_escape_str.
Signed-off-by: Zoltán Füzesi <zfuzesi@eaglet.hu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Equality between file_parent and file_name was being checked without a
preliminary check for existence of the parameters.
Fix by wrapping the equality check in appropriate if (defined ...),
rearranging the lines to prevent excessive length.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using "light2" and "dark2" for class names in 'blame' view
(in place of "light" and "dark" classes in other places) to avoid
changing style on hover in 'blame' view while doing it for other views
(like 'shortlog'), use more advanced CSS, relying on the fact that
more specific selector wins.
While at it add a few comments to gitweb CSS file, and consolidate
some repeated info.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example for "Junio C Hamano" initials would be "JH". Of course
initials are added (below shortened SHA-1 of blamed commit) only if
group of lines that blame the same commit has 2 or more lines in it.
Initials are extracted using i18n /\b([[:upper:]])\B/g regexp.
Additionally initials help to distinguish boundary commits, as they
use bold weight font too (in addition to shortened SHA-1 of commit).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "no-previous" class to mark blamed commits which do not have
"previous" header. Those are commits in which blamed file was created
(added); this includes boundary commits. This means that 'linenr'
link leads to blamed commit, not (one of) parent of blamed commit.
Therefore currently line number for such commit uses bold weight font
to denote this situation; the effect is subtle.
Use "multiple-previous" class in the opposite situation, where blamed
commit has multiple "previous" headers (is an evil merge). Currently
this class is not used for styling. In this situation 'linenr' link
leads to first of "previous" commits (first parent).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luben Tuikov changed 'lineno' link (line number link) from pointing to
'blame' view at given line at blamed commit, to the one at parent of
blamed commit in
244a70e (Blame "linenr" link jumps to previous state at
"orig_lineno", 2007-01-04).
This made it possible to do data mining using 'blame' view, by going
through history of a line using mentioned line number link.
Original implementation called "git rev-parse <commit>^" to find SHA-1
of a parent of a given commit once per each blamed line. In
39c19ce (gitweb: cache $parent_commit info in git_blame(),
2008-12-11)
this was improved so rev-parse was called once per each unique commit
in git-blame output. Alternate solution would be to relax validation
for 'hb' parameter by allowing extended SHA-1 syntax of the form
<rev>^ (perhaps redirecting to gitweb URL with <rev>^ resolved, in
practice moving call to rev-parse to 'the other side of link').
This solution had a bug that it didn't work for boundary commits.
Boundary commits don't have parents, so "git rev-parse <commit>^"
returned literal "<commit>^" (which didn't exists). Gitweb didn't
detect this situation and passed this result literally as 'hb'
parameter in 'linenr' link. Following such link currently gives
400 - Invalid hash base parameter
error; 'hb' parameter is restricted via validate_refname to correct
refnames and doesn't allow for extended SHA-1 syntax. This bug could
have been fixed alternatively by checking if commit is boundary commit,
or check if rev-parse result is unchanged (still ends in '^' prefix).
The solution employing rev-parse to find parent of commit had inherent
problem if blamed commit renamed file; then name of file would be
different in its parent. Solving this outside git-blame would be
difficult and costly (at least cost of additional fork for extra git
command).
Currently gitweb uses information in "previous" header, which was
introduced by Junio C Hamano in
96e1170 (blame: show "previous" information in
--porcelain/--incremental format, 2008-06-04)
This (currently undocumented) header has the following format:
"previous <sha1 of parent commit> <filename at parent>"
Using "previous" header solves both problem of performance and the
problem that blamed commit could have renaming blamed file.
Because "previous" header can be repeated for the same commit when
blamed commit is merge (has more than one parent), and we are
interested usually in _first_ parent, currently we store only first
value if blame header repeats. Using first parent (first "previous"
line) was what gitweb did before; without this change gitweb would use
last parent instead.
If there is no previous commit 'linenr' link points to blamed commit
and blamed filename, making it work correctly for boundary commits.
Acked-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "boundary" class to mark boundary commits, which currently results
in using bold weight font for SHA-1 of a commit (to be more exact for
all text in the first cell in row, that contains SHA-1 of a commit).
Detecting boundary commits is done by watching for "boundary" header
in "git blame -p" output. Because this header doesn't carry
additional data the regular expression for blame header fields
had to be slightly adjusted.
With current gitweb API only root (parentless) commits can be boundary
commits.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Style for td.error was introduced in 1f1ab5f (gitweb: style done with
stylesheet, 2006-06-20) to replace inline style for errors in old
multi-column "git annotate" based 'blame' view. This view was then
since removed (replaced by "git-blame" based 'blame' view, with fewer
colums), making this style unused.
Make this style more generic by replacing td.error with .error to make
it apply to any element. It will be used in 'blame_incremental' view
to show error messages.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-scm.com is now the "official" Git project page, having taken over
from git.or.cz, so update the default link accordingly. This saves a
redirect when people hit git.or.cz.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/gitweb-avatar:
gitweb: add empty alt text to avatar img
gitweb: picon avatar provider
gitweb: gravatar url cache
gitweb: (gr)avatar support
gitweb: use git_print_authorship_rows in 'tag' view too
gitweb: uniform author info for commit and commitdiff
gitweb: refactor author name insertion
The empty alt text optimizes screen estate in text-only browsers.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simple implementation of picon that only relies on the indiana.edu
database.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Views which contain many occurrences of the same email address (e.g.
shortlog view) benefit from not having to recalculate the MD5 of the
email address every time.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce avatar support: the feature adds the appropriate img tag next
to author and committer in commit(diff), history, shortlog, log and tag
views. Multiple avatar providers are possible, but only gravatar is
implemented at the moment.
Gravatar support depends on Digest::MD5, which is a core package since
Perl 5.8. If gravatars are activated but Digest::MD5 cannot be found,
the feature will be automatically disabled.
No avatar provider is selected by default, except in the t9500 test.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_tag must be adapted to use the hash keys expected by
git_print_authorship_rows. This is not a problem since git_tag is the
only user of this sub.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from 'log'-like layout
A U Thor <email@example.com> [date time]
to 'commit'-like layout
author A U Thor <email@example.com>
date time
committer C O Mitter <other.email@example.com>
committer date time
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Collect all author display code in appropriate functions, making it
easier to extend these functions on the CGI side.
We also move some of the presentation code from hard-coded HTML to CSS,
for easier customization.
A side effect of the refactoring is that now localtime is always
displayed with the 'at night' warning.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When combining "dumb client" and human-friendly access by using the
'.git' extension to switch between the two, make sure the AliasMatch
covers the entire request. Without a full match, a request for
http://git.example.com/project/shortlog/branch..gitsomething
would result in a 404 because the server would try to access the
the project 'project/shortlog/branch.'
The solution is still not bulletproof, so document the possible failing
case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-cleanup:
gitweb: Remove unused $hash_base parameter from normalize_link_target
gitweb: Simplify snapshot format detection logic in evaluate_path_info
gitweb: Use capturing parentheses only when you intend to capture
gitweb: Replace wrongly added tabs with spaces
gitweb: Use block form of map/grep in a few cases more
gitweb: Always use three argument form of open
gitweb: Always use three argument form of open
gitweb: Do not use bareword filehandles
Replace control characters with question mark '?' (like in
chop_and_esc_str).
A little background: some web browsers turn on strict (and
unforgiving) XML validating mode for XHTML documents served using
application/xhtml+xml content type. This means among others that
control characters are forbidden to appear in gitweb output.
CGI.pm does by default slight escaping (using simple_escape subroutine
from CGI::Util) of all _attribute_ values (depending on the value of
autoEscape, by default on). This escaping, at least in CGI.pm version
3.10 (most current version at CPAN is 3.43), is minimal: only '"',
'&', '<' and '>' are escaped using named HTML entity references
(", &, < and > respectively). But simple_escape does
not do escaping of control characters such as ^X which are invalid in
XHTML (in strict mode).
If by some accident commit message do contain some control character
in first 50 characters (more or less) of first line of commit message,
and this line is longer than 50 characters (so gitweb shortens it for
display), then gitweb would put this control character in title
attribute (and CGI.pm would not remove them). The tag _contents_ is
safe because it is escaped using esc_html() explicitly, and it
replaces control characters by their printable representation.
While at it: chop_and_escape_str doesn't need capturing group.
Noticed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...since it was decided for normalize_link_target to only mangle
pathname, and do not try to check if target is present in $hash_base
tree, for performance reasons.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This issue was caught by perlcritic in harsh severity level noticing
that catch variable was used outside conditional thanks to the
Perl::Critic::Policy::RegularExpressions::ProhibitCaptureWithoutTest
policy. See "Perl Best Practices", chapter 12. Regular Expressions,
section 12.15. Captured Values:
Pattern matches that fail never assign anything to $1, $2, etc.,
nor do they leave those variables undefined. After an unsuccessful
pattern match, the numeric capture variables remain exactly as they
were before the match was attempted.
New version is in my opinion much easier to understand; previous
version worked correctly due to the fact that we returned from loop
on first found match.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-capturing groups are useful because they have better runtime
performance and do not copy strings to the magic global capture
variables.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In two places there was hard tab character instead of space.
Fix this.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use block form of 'grep' i.e. 'grep {BLOCK} LIST' rather than
'grep(EXPR, LIST)' in filter_snapshot_fmts subroutine. This makes
code more readable, as expression is rather long, and statement above
there is 'map' with very similar expression also in the block form.
Remove unnecessary and misleading parentheses around block form 'map'
arguments in quote_command subroutine.
The inner "map" in format_snapshot_links was left alone, as it is not
clear whether adding parentheses or changing it into block form would
improve readibility and clarity of this code.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From 94638fb6edf3ea693228c680a6a30271ccd77522 Mon Sep 17 00:00:00 2001
From: Jakub Narebski <jnareb@gmail.com>
Date: Mon, 11 May 2009 03:25:55 +0200
Subject: [PATCH] gitweb: Localize magic variable $/
Instead of undefining and then restoring magic variable $/ (input
record separator) for 'slurp mode', localize it.
While at it, state explicitely that "local $/;" makes it undefined, by
using explicit "local $/ = undef;".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases (except insert_file() subroutine) we used old two argument
form of 'open' to open files for reading. This can cause subtle bugs when
$projectroot or $projects_list file starts with mode characters ('>', '<',
'+<', '|', etc.) or with leading whitespace; and also when $projects_list
file or $mimetypes_file or ctags files end with trailing whitespace or '|'.
Additionally it is also more clear to explicitly state that we open those
files for reading.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
