Change the output of the likes of "git branch -l --sort=-objectsize"
to show the "(HEAD detached at <hash>)" message at the start of the
output. Before the compare_detached_head() function added in a
preceding commit we'd emit this output as an emergent effect.
It doesn't make any sense to consider the objectsize, type or other
non-attribute of the "(HEAD detached at <hash>)" message for the
purposes of sorting. Let's always emit it at the top instead. The only
reason it was sorted in the first place is because we're injecting it
into the ref-filter machinery so builtin/branch.c doesn't need to do
its own "am I detached?" detection.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in
28438e84e0 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288 (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
1. https://en.wikipedia.org/wiki/Chinese_punctuation#Marks_similar_to_European_punctuation
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the reverse/ignore_case/version sort flags in the ref_sorting
struct into a bitfield. Having three of them was already a bit
unwieldy, but it would be even more so if another flag needed a
function like ref_sorting_icase_all() introduced in
76f9e569ad (ref-filter: apply --ignore-case to all sorting keys,
2020-05-03).
A follow-up change will introduce such a flag, so let's move this over
to a bitfield. Instead of using the usual '#define' pattern I'm using
the "enum" pattern from builtin/rebase.c's b4c8eb024a (builtin
rebase: support --quiet, 2018-09-04).
Perhaps there's a more idiomatic way of doing the "for each in list
amend mask" pattern than this "mask/on" variable combo. This function
doesn't allow us to e.g. do any arbitrary changes to the bitfield for
multiple flags, but I think in this case that's fine. The common case
is that we're calling this with a list of one.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further amend code changed in 7c5045fc18 (ref-filter: apply fallback
refname sort only after all user sorts, 2020-05-03) to move an
assignment only used in the "else if" arm to happen there. Before that
commit the cmp_fn would be used outside of it.
We could also just skip the "cmp_fn" assignment and use
strcasecmp/strcmp directly in a ternary statement here, but this is
probably more readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per the CodingGuidelines add braces to an if/else if/else chain where
only the "else" had braces. This is in preparation for a subsequent
change where the "else if" will have lines added to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref-filter code does not correctly handle commit or tag messages
that use CRLF as the line terminator. Such messages can be created with
the `--cleanup=verbatim` option of `git commit` and `git tag`, or by
using `git commit-tree` directly.
The function `find_subpos` in ref-filter.c looks for two consecutive
LFs to find the end of the subject line, a sequence which is absent in
messages using CRLF. This results in the whole message being parsed as
the subject line (`%(contents:subject)`), and the body of the message
(`%(contents:body)`) being empty.
Moreover, in `copy_subject`, which wants to return the subject as a
single line, '\n' is replaced by space, but '\r' is
untouched.
This impacts the output of `git branch`, `git tag` and `git
for-each-ref`.
This behaviour is a regression for `git branch --verbose`, which
bisects down to 949af0684c (branch: use ref-filter printing APIs,
2017-01-10).
Adjust the ref-filter code to be more lenient by hardening the logic in
`copy_subject` and `find_subpos` to correctly parse messages containing
CRLF.
Add a new test script, 't3920-crlf-messages.sh', to test the behaviour
of commands using either the ref-filter or the pretty APIs with messages
using CRLF line endings. The function `test_crlf_subject_body_and_contents`
can be used to test that the `--format` option of `branch`, `tag`,
`for-each-ref`, `log` and `show` correctly displays the subject, body
and raw content of commit and tag messages using CRLF. Test the
output of `branch`, `tag` and `for-each-ref` with such commits.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ma/worktree-cleanups:
worktree: use skip_prefix to parse target
worktree: rename copy-pasted variable
worktree: update renamed variable in comment
worktree: inline `worktree_ref()` into its only caller
wt-status: introduce wt_status_state_free_buffers()
wt-status: print to s->fp, not stdout
wt-status: replace sha1 mentions with oid
When we have a `struct wt_status_state`, we manually free its `branch`,
`onto` and `detached_from`, or sometimes just one or two of them.
Provide a function `wt_status_state_free_buffers()` which does the
freeing.
The callers are still aware of these fields, e.g., they check whether
`branch` was populated or not. But this way, they don't need to know
about *all* of them, and if `struct wt_status_state` gets more fields,
they will not need to learn to free them.
Users of `struct wt_status` (which contains a `wt_status_state`) already
have `wt_status_collect_free_buffers()` (corresponding to
`wt_status_collect()`) which we can also teach to use this new helper.
Finally, note that we're currently leaving dangling pointers behind.
Some callers work on a stack-allocated struct, where this is obviously
ok. But for the users of `run_status()` in builtin/commit.c, there are
ample opportunities for someone to mistakenly use those dangling
pointers. We seem to be ok for now, but it's a use-after-free waiting to
happen. Let's leave NULL-pointers behind instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
21bf933928 (ref-filter: allow merged and no-merged filters, 2020-09-15)
added an early return to reach_filter(). Avoid leaking the memory of a
then unused array by postponing its allocation until we know we need it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal reachable-filter API is a bit loose and imprecise; it
also bleeds unnecessarily into the public header. Tighten the API
by:
* renaming do_merge_filter() to reach_filter()
* separating parameters to explicitly identify what data is used
by the function instead of passing an entire ref_filter_cbdata
struct
* renaming and moving internal constants from header to source
file
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable ref-filter to process multiple merged and no-merged filters, and
extend functionality to git branch, git tag and git for-each-ref. This
provides an easy way to check for branches that are "graduation
candidates:"
$ git branch --no-merged master --merged next
If passed more than one merged (or more than one no-merged) filter, refs
must be reachable from any one of the merged commits, and reachable from
none of the no-merged commits.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--format=" option to the "for-each-ref" command and friends
learned a few more tricks, e.g. the ":short" suffix that applies to
"objectname" now also can be used for "parent", "tree", etc.
* hv/ref-filter-misc:
ref-filter: add `sanitize` option for 'subject' atom
pretty: refactor `format_sanitized_subject()`
ref-filter: add `short` modifier to 'parent' atom
ref-filter: add `short` modifier to 'tree' atom
ref-filter: rename `objectname` related functions and fields
ref-filter: modify error messages in `grab_objectname()`
ref-filter: refactor `grab_objectname()`
ref-filter: support different email formats
The parser for "git for-each-ref --format=..." was too loose when
parsing the "%(trailers...)" atom, and forgot that "trailers" and
"trailers:<modifiers>" are the only two allowed forms, which has
been corrected.
* hv/ref-filter-trailers-atom-parsing-fix:
ref-filter: 'contents:trailers' show error if `:` is missing
t6300: unify %(trailers) and %(contents:trailers) tests
Currently, subject does not take any arguments. This commit introduce
`sanitize` formatting option to 'subject' atom.
`subject:sanitize` - print sanitized subject line, suitable for a filename.
e.g.
%(subject): "the subject line"
%(subject:sanitize): "the-subject-line"
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes while using 'parent' atom, user might want to see abbrev hash
instead of full 40 character hash.
Just like 'objectname', it might be convenient for users to have the
`:short` and `:short=<length>` option for printing 'parent' hash.
Let's introduce `short` option to 'parent' atom.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes while using 'tree' atom, user might want to see abbrev hash
instead of full 40 character hash.
Just like 'objectname', it might be convenient for users to have the
`:short` and `:short=<length>` option for printing 'tree' hash.
Let's introduce `short` option to 'tree' atom.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous commits, we prepared some `objectname` related functions
for more generic usage, so that these functions can be used for `tree`
and `parent` atom.
But the name of some functions and fields may mislead someone.
For ex: function `objectname_atom_parser()` implies that it is
for atom `objectname`.
Let's rename all such functions and fields.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we plan to use `grab_objectname()` for `tree` and `parent` atom,
it's better to parameterize the error messages in the function
`grab_objectname()` where "objectname" is hard coded.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepares `grab_objectname()` for more generic usage.
This change will allow us to reuse `grab_objectname()` for
the `tree` and `parent` atoms in a following commit.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, ref-filter only supports printing email with angle brackets.
Let's add support for two more email options.
- trim : for email without angle brackets.
- localpart : for the part before the @ sign out of trimmed email
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'contents' atom does not show any error if used with 'trailers'
atom and colon is missing before trailers arguments.
e.g %(contents:trailersonly) works, while it shouldn't.
It is definitely not an expected behavior.
Let's fix this bug.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit fixes a couple of minor spelling mistakes inside
comments.
Signed-off-by: Steve Kemp <steve@steve.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's useful and efficient to be able to get the size of the
contents directly without having to pipe through `wc -c`.
Also the result of the following:
`git for-each-ref --format='%(contents)' refs/heads/my-branch | wc -c`
is off by one as `git for-each-ref` appends a newline character
after the contents, which can be seen by comparing its output
with the output from `git cat-file`.
As with %(contents), %(contents:size) is silently ignored, if a
ref points to something other than a commit or a tag:
```
$ git update-ref refs/mytrees/first HEAD^{tree}
$ git for-each-ref --format='%(contents)' refs/mytrees/first
$ git for-each-ref --format='%(contents:size)' refs/mytrees/first
```
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
get_worktrees() accepts a 'flags' argument, however, there are no
existing flags (the lone flag GWT_SORT_LINKED was recently retired) and
no behavior which can be tweaked. Therefore, drop the 'flags' argument.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" and other "for-each-ref" variants accepted multiple
--sort=<key> options in the increasing order of precedence, but it
had a few breakages around "--ignore-case" handling, and tie-breaking
with the refname, which have been fixed.
* jk/for-each-ref-multi-key-sort-fix:
ref-filter: apply fallback refname sort only after all user sorts
ref-filter: apply --ignore-case to all sorting keys
Commit 9e468334b4 (ref-filter: fallback on alphabetical comparison,
2015-10-30) taught ref-filter's sort to fallback to comparing refnames.
But it did it at the wrong level, overriding the comparison result for a
single "--sort" key from the user, rather than after all sort keys have
been exhausted.
This worked correctly for a single "--sort" option, but not for multiple
ones. We'd break any ties in the first key with the refname and never
evaluate the second key at all.
To make matters even more interesting, we only applied this fallback
sometimes! For a field like "taggeremail" which requires a string
comparison, we'd truly return the result of strcmp(), even if it was 0.
But for numerical "value" fields like "taggerdate", we did apply the
fallback. And that's why our multiple-sort test missed this: it uses
taggeremail as the main comparison.
So let's start by adding a much more rigorous test. We'll have a set of
commits expressing every combination of two tagger emails, dates, and
refnames. Then we can confirm that our sort is applied with the correct
precedence, and we'll be hitting both the string and value comparators.
That does show the bug, and the fix is simple: moving the fallback to
the outer compare_refs() function, after all ref_sorting keys have been
exhausted.
Note that in the outer function we don't have an "ignore_case" flag, as
it's part of each individual ref_sorting element. It's debatable what
such a fallback should do, since we didn't use the user's keys to match.
But until now we have been trying to respect that flag, so the
least-invasive thing is to try to continue to do so. Since all callers
in the current code either set the flag for all keys or for none, we can
just pull the flag from the first key. In a hypothetical world where the
user really can flip the case-insensitivity of keys separately, we may
want to extend the code to distinguish that case from a blanket
"--ignore-case".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the ref-filter users (for-each-ref, branch, and tag) take an
--ignore-case option which makes filtering and sorting case-insensitive.
However, this option was applied only to the first element of the
ref_sorting list. So:
git for-each-ref --ignore-case --sort=refname
would do what you expect, but:
git for-each-ref --ignore-case --sort=refname --sort=taggername
would sort the primary key (taggername) case-insensitively, but sort the
refname case-sensitively. We have two options here:
- teach callers to set ignore_case on the whole list
- replace the ref_sorting list with a struct that contains both the
list of sorting keys, as well as options that apply to _all_
keys
I went with the first one here, as it gives more flexibility if we later
want to let the users set the flag per-key (presumably through some
special syntax when defining the key; for now it's all or nothing
through --ignore-case).
The new test covers this by sorting on both tagger and subject
case-insensitively, which should compare "a" and "A" identically, but
still sort them before "b" and "B". We'll break ties by sorting on the
refname to give ourselves a stable output (this is actually supposed to
be done automatically, but there's another bug which will be fixed in
the next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A comment refers to the "sha1s in the given sha1 array". But this became
an oid_array along with everywhere else in 910650d2f8 (Rename sha1_array
to oid_array, 2017-03-31). Plus there's an extra line of leftover
editing cruft we can drop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9700fae5ee (for-each-ref: let upstream/push report the remote
ref name, 2017-11-07) added a remote_ref_for_branch() helper, which
is modeled after remote_for_branch(). This includes providing an
"explicit" out-parameter that tells the caller whether the remote
was configured by the user, or whether we picked a default name like
"origin".
But unlike remote names, there is no default name when the user
didn't configure one. The only way the "explicit" parameter is used
by the caller is to use the value returned from the helper when it
is set, and use an empty string otherwise, ignoring the returned
value from the helper.
Let's drop the "explicit" out-parameter, and return NULL when the
returned value from the helper should be ignored, to simplify the
function interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a caller sets the object_info.delta_base_sha1 to a non-NULL pointer,
we'll write the oid of the object's delta base to it. But we can
increase our type safety by switching this to a real object_id struct.
All of our callers are just pointing into the hash member of an
object_id anyway, so there's no inconvenience.
Note that we do still keep it as a pointer-to-struct, because the NULL
sentinel value tells us whether the caller is even interested in the
information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comments stating that "struct hashmap_entry" must be the first
member in a struct are no longer valid.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"for-each-ref" and friends that shows refs did not protect themselves
against ancient tags that did not record tagger names when asked to
show "%(taggername)", which have been corrected.
* mp/for-each-ref-missing-name-or-email:
ref-filter: initialize empty name or email fields
Avoid derefencing ->tagged without checking for NULL by using the
convenience wrapper for getting the ID of the tagged object. It die()s
when encountering a broken tag instead of segfaulting.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formatting $(taggername) on headerless tags such as v0.99 in Git
causes a SIGABRT with error "munmap_chunk(): invalid pointer",
because of an oversight in commit f0062d3b74 (ref-filter: free
item->value and item->value->s, 2018-10-19).
Signed-off-by: Mischa POSLAWSKY <git@shiar.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
