Clarify how "checkout -b/-B" and "git branch [-f]" are similar but
different in the documentation.
* jc/doc-checkout-b:
checkout: document -b/-B to highlight the differences from "git branch"
Document that "branch -f <branch>" disables only the safety to
avoid recreating an existing branch.
* jc/doc-branch-update-checked-out-branch:
branch: document `-f` and linked worktree behaviour
"git check-attr" learned to take an optional tree-ish to read the
.gitattributes file from.
* kn/attr-from-tree:
attr: add flag `--source` to work with tree-ish
t0003: move setup for `--all` into new block
Document ORIG_HEAD a bit more.
* pb/doc-orig-head:
git-rebase.txt: add a note about 'ORIG_HEAD' being overwritten
revisions.txt: be explicit about commands writing 'ORIG_HEAD'
git-merge.txt: mention 'ORIG_HEAD' in the Description
git-reset.txt: mention 'ORIG_HEAD' in the Description
git-cherry-pick.txt: do not use 'ORIG_HEAD' in example
The cURL one hasn't cooked for a week in 'next', but let's fast
track it so that linux-musl CI job would be happy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text read as if "git checkout -b/-B name" were
equivalent to "git branch [-f] name", which clearly was not
what we wanted to say.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -f name start" forces to recreate the named branch, but
the forcing does not defeat the "do not touch a branch that is
checked out elsewhere" safety valve.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With Asciidoctor, all of the '+' introduced in a797c0ea04 ("cat-file:
add mailmap support to --batch-check option", 2022-12-20) render
literally rather than functioning as list continuations. With asciidoc,
this renders just fine. It's not too surprising that there is room for
ambiguity and surprises here, since we have lists within lists.
Simply replacing all of these '+' with empty lines makes this render
fine using both tools. Except, in the third hunk, where after this inner
'*' list ends, we want to continue with more contents of the outer list
item (`--batch-command=<format>`). We can solve any ambiguity here and
make this clear to both tools by wrapping the inner list in an open
block (using "--").
For consistency, let's wrap all three of these inner lists from
a797c0ea04 in open blocks. This also future-proofs us a little -- if we
ever gain more contents after any of those first two lists, as we did
already in a797c0ea04 for the third list, we're prepared and should
render fine with both asciidoc and Asciidoctor from the start.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce an optional configuration to allow the trailing hash that
protects the index file from bit flipping.
* ds/omit-trailing-hash-in-index:
features: feature.manyFiles implies fast index writes
test-lib-functions: add helper for trailing hash
read-cache: add index.skipHash config option
hashfile: allow skipping the hash function
Conditionally skip the pre-applypatch and applypatch-msg hooks when
applying patches with 'git am'.
* tr/am--no-verify:
am: allow passing --no-verify flag
The contents of the .gitattributes files may evolve over time, but "git
check-attr" always checks attributes against them in the working tree
and/or in the index. It may be beneficial to optionally allow the users
to check attributes taken from a commit other than HEAD against paths.
Add a new flag `--source` which will allow users to check the
attributes against a commit (actually any tree-ish would do). When the
user uses this flag, we go through the stack of .gitattributes files but
instead of checking the current working tree and/or in the index, we
check the blobs from the provided tree-ish object. This allows the
command to also be used in bare repositories.
Since we use a tree-ish object, the user can pass "--source
HEAD:subdirectory" and all the attributes will be looked up as if
subdirectory was the root directory of the repository.
We cannot simply use the `<rev>:<path>` syntax without the `--source`
flag, similar to how it is used in `git show` because any non-flag
parameter before `--` is treated as an attribute and any parameter after
`--` is treated as a pathname.
The change involves creating a new function `read_attr_from_blob`, which
given the path reads the blob for the path against the provided source and
parses the attributes line by line. This function is plugged into
`read_attr()` function wherein we go through the stack of attributes
files.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Co-authored-by: toon@iotcl.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace non-existent `branch.<name>.fetch` to `remote.<repository>.fetch`, in
the first example in `git-fetch` doc, which was introduced in
d504f6975d (modernize fetch/merge/pull examples, 2009-10-21).
Rename placeholder `<name>` to `<repository>`, to be consistent with all other
uses in git docs, except that `git-config.txt` uses `remote.<name>.fetch` in
its "Variables" section.
Also add missing monospace markups.
Signed-off-by: Yukai Chou <muzimuzhi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, in the git-log documentation, the reference to generating
patches does not match the section title. This can make the section
"Generating patch text with -p" hard to find, since typically readers of
the documentation will copy and paste to search the page.
Let's make this more convenient for readers by linking it directly to
the section.
Since git-log pulls in diff-generate-patch.txt, we can provide a direct
link to the section. Otherwise, change the verbiage to match exactly
what the section title is, to at least make searching for it an easier
task.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d656218a83 (docs/bisect-lk2009: update nist report link,
2017-04-20) replaced a dead link to news release on nist.gov. However,
this might be confusing to the reader (like myself) because the article
git-bisect-lk2009.txt quotes from the news release but the exact quote
cannot be found in the full report. In addition to that, the link added
in 2017 is also dead in 2023.
Replace the reference to nist.gov with an version of the original NIST
news release archived to the Wayback Machine. Include also an updated
link to a live version of the full report.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A reference to Java Code Conventions in git-bisect-lk2009.txt uses an
outdated URL that redirects to table of contents for the conventions.
The actual claim about "80%" that this reference backs up is on the
first page of the conventions:
https://www.oracle.com/java/technologies/javase/codeconventions-introduction.html
Use this newer URL and its title in the reference.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "DETACHED HEAD" section in the git-checkout doc, it suggests
using "git checkout -b <branch-name>" to create a new branch on the
detached head.
On the other hand, when you checkout a commit that is not at the tip of
any named branch (e.g., when you checkout a tag), git suggests using
"git switch -c <branch-name>".
Add "git switch -c" as another option and mitigate this inconsistency.
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'ORIG_HEAD' is written at the start of the rebase, but is not guaranteed
to still point to the original branch tip at the end of the rebase.
Indeed, using other commands that write 'ORIG_HEAD' during the rebase,
like splitting a commit using 'git reset HEAD^', will lead to 'ORIG_HEAD'
being overwritten. This causes confusion for some users [1].
Add a note about that in the 'Description' section, and mention the more
robust alternative of using the branch's reflog.
[1] https://lore.kernel.org/git/28ebf03b-e8bb-3769-556b-c9db17e43dbb@gmail.com/T/#m827179c5adcfb504d67f76d03c8e6942b55e5ed0
Reported-by: Erik Cervin Edin <erik@cervined.in>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When mentioning 'ORIG_HEAD', be explicit about which command write that
pseudo-ref, namely 'git am', 'git merge', 'git rebase' and 'git reset'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that 'git merge' writes 'ORIG_HEAD' before performing the merge
is missing from the documentation of the command.
Mention it in the 'Description' section.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that 'git reset' writes 'ORIG_HEAD' before changing HEAD is
mentioned in an example, but is missing from the 'Description' section.
Mention it in the discussion of the "'git reset' [<mode>] [<commit>]"
form of the command.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 67ac1e1d57 (cherry-pick/revert: add support for
-X/--strategy-option, 2010-12-10) added an example to the documentation
of 'git cherry-pick'. This example mentions how to abort a failed
cherry-pick and retry with an additional merge strategy option.
The command used in the example to abort the cherry-pick is 'git reset
--merge ORIG_HEAD', but cherry-pick does not write 'ORIG_HEAD' before
starting its operation. So this command would checkout a commit
unrelated to what was at HEAD when the user invoked cherry-pick.
Use 'git cherry-pick --abort' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in code comments which repeat various words. Most of the
cases are simple in that they repeat a word that usually cannot be
repeated in a grammatically correct sentence. Just remove the
incorrectly duplicated word in these cases and rewrap text, if needed.
A tricky case is usage of "that that", which is sometimes grammatically
correct. However, an instance of this in "t7527-builtin-fsmonitor.sh"
doesn't need two words "that", because there is only one daemon being
discussed, so replace the second "that" with "the".
Reword code comment "entries exist on on-disk index" in function
update_one in file cache-tree.c, by replacing incorrect preposition "on"
with "in".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent addition of the index.skipHash config option allows index
writes to speed up by skipping the hash computation for the trailing
checksum. This is particularly critical for repositories with many files
at HEAD, so add this config option to two cases where users in that
scenario may opt-in to such behavior:
1. The feature.manyFiles config option enables some options that are
helpful for repositories with many files at HEAD.
2. 'scalar register' and 'scalar reconfigure' set config options that
optimize for large repositories.
In both of these cases, set index.skipHash=true to gain this
speedup. Add tests that demonstrate the proper way that
index.skipHash=true can override feature.manyFiles=true.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change allowed skipping the hashing portion of the
hashwrite API, using it instead as a buffered write API. Disabling the
hashwrite can be particularly helpful when the write operation is in a
critical path.
One such critical path is the writing of the index. This operation is so
critical that the sparse index was created specifically to reduce the
size of the index to make these writes (and reads) faster.
This trade-off between file stability at rest and write-time performance
is not easy to balance. The index is an interesting case for a couple
reasons:
1. Writes block users. Writing the index takes place in many user-
blocking foreground operations. The speed improvement directly
impacts their use. Other file formats are typically written in the
background (commit-graph, multi-pack-index) or are super-critical to
correctness (pack-files).
2. Index files are short lived. It is rare that a user leaves an index
for a long time with many staged changes. Outside of staged changes,
the index can be completely destroyed and rewritten with minimal
impact to the user.
Following a similar approach to one used in the microsoft/git fork [1],
add a new config option (index.skipHash) that allows disabling this
hashing during the index write. The cost is that we can no longer
validate the contents for corruption-at-rest using the trailing hash.
[1] 21fed2d914
We load this config from the repository config given by istate->repo,
with a fallback to the_repository if it is not set.
While older Git versions will not recognize the null hash as a special
case, the file format itself is still being met in terms of its
structure. Using this null hash will still allow Git operations to
function across older versions.
The one exception is 'git fsck' which checks the hash of the index file.
This used to be a check on every index read, but was split out to just
the index in a33fc72fe9 (read-cache: force_verify_index_checksum,
2017-04-14) and released first in Git 2.13.0. Document the versions that
relaxed these restrictions, with the optimistic expectation that this
change will be included in Git 2.40.0.
Here, we disable this check if the trailing hash is all zeroes. We add a
warning to the config option that this may cause undesirable behavior
with older Git versions.
As a quick comparison, I tested 'git update-index --force-write' with
and without index.skipHash=true on a copy of the Linux kernel
repository.
Benchmark 1: with hash
Time (mean ± σ): 46.3 ms ± 13.8 ms [User: 34.3 ms, System: 11.9 ms]
Range (min … max): 34.3 ms … 79.1 ms 82 runs
Benchmark 2: without hash
Time (mean ± σ): 26.0 ms ± 7.9 ms [User: 11.8 ms, System: 14.2 ms]
Range (min … max): 16.3 ms … 42.0 ms 69 runs
Summary
'without hash' ran
1.78 ± 0.76 times faster than 'with hash'
These performance benefits are substantial enough to allow users the
ability to opt-in to this feature, even with the potential confusion
with older 'git fsck' versions.
Test this new config option, both at a command-line level and within a
submodule. The confirmation is currently limited to confirm that 'git
fsck' does not complain about the index. Future updates will make this
test more robust.
It is critical that this test is placed before the test_index_version
tests, since those tests obliterate the .git/config file and hence lose
the setting from GIT_TEST_DEFAULT_HASH, if set.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using "git --super-prefix" and narrow the scope of its use to
the submodule--helper.
* ab/no-more-git-global-super-prefix:
read-tree: add "--super-prefix" option, eliminate global
submodule--helper: convert "{update,clone}" to their own "--super-prefix"
submodule--helper: convert "status" to its own "--super-prefix"
submodule--helper: convert "sync" to its own "--super-prefix"
submodule--helper: convert "foreach" to its own "--super-prefix"
submodule--helper: don't use global --super-prefix in "absorbgitdirs"
submodule.c & submodule--helper: pass along "super_prefix" param
read-tree + fetch tests: test failing "--super-prefix" interaction
submodule absorbgitdirs tests: add missing "Migrating git..." tests
'cat-file' gains mailmap support for its '--batch-check' and '-s'
options.
* sa/cat-file-mailmap--batch-check:
cat-file: add mailmap support to --batch-check option
cat-file: add mailmap support to -s option
The git-am --no-verify flag is analogous to the same flag passed to
git-commit. It bypasses the pre-applypatch and applypatch-msg hooks
if they are enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to honor format.mboxrd even when sending
patches to the standard output stream,
* ew/format-patch-mboxrd:
format-patch: support format.mboxrd with --stdout
Bundle URIs part 4.
* ds/bundle-uri-4:
clone: unbundle the advertised bundles
bundle-uri: download bundles from an advertised list
bundle-uri: allow relative URLs in bundle lists
strbuf: introduce strbuf_strip_file_from_path()
bundle-uri: serve bundle.* keys from config
bundle-uri client: add helper for testing server
transport: rename got_remote_heads
bundle-uri client: add boolean transfer.bundleURI setting
clone: request the 'bundle-uri' command when available
t: create test harness for 'bundle-uri' command
protocol v2: add server-side "bundle-uri" skeleton
