Newer versions of Getopt::Long started giving warnings against our
(ab)use of it in "git send-email". Bump the minimum version
requirement for Perl to 5.8.1 (from September 2002) to allow
simplifying our implementation.
* tz/send-email-negatable-options:
send-email: avoid duplicate specification warnings
perl: bump the required Perl version to 5.8.1 from 5.8.0
"git rebase --autosquash" is now enabled for non-interactive rebase,
but it is still incompatible with the apply backend.
* ak/rebase-autosquash:
rebase: rewrite --(no-)autosquash documentation
rebase: support --autosquash without -i
rebase: fully ignore rebase.autoSquash without -i
"git for-each-ref --no-sort" still sorted the refs alphabetically
which paid non-trivial cost. It has been redefined to show output
in an unspecified order, to allow certain optimizations to take
advantage of.
* vd/for-each-ref-unsorted-optimization:
t/perf: add perf tests for for-each-ref
ref-filter.c: use peeled tag for '*' format fields
for-each-ref: clean up documentation of --format
ref-filter.c: filter & format refs in the same callback
ref-filter.c: refactor to create common helper functions
ref-filter.c: rename 'ref_filter_handler()' to 'filter_one()'
ref-filter.h: add functions for filter/format & format-only
ref-filter.h: move contains caches into filter
ref-filter.h: add max_count and omit_empty to ref_format
ref-filter.c: really don't sort when using --no-sort
Process to add some form of low-level unit tests has started.
* js/doc-unit-tests:
ci: run unit tests in CI
unit tests: add TAP unit test framework
unit tests: add a project plan document
Let's add a `--contained` option that can be used along with
`--onto` to rebase all the branches contained in the <revision-range>
argument.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is already a 'rebase' mode with `--onto`. Let's add an 'advance' or
'cherry-pick' mode with `--advance`. This new mode will make the target
branch advance as we replay commits onto it.
The replayed commits should have a single tip, so that it's clear where
the target branch should be advanced. If they have more than one tip,
this new mode will error out.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of the fixed "<oldbase> <branch>" arguments, the replay
command now accepts "<revision-range>..." arguments in a similar
way as many other Git commands. This makes its interface more
standard and more flexible.
This also enables many revision related options accepted and
eaten by setup_revisions(). If the replay command was a high level
one or had a high level mode, it would make sense to restrict some
of the possible options, like those generating non-contiguous
history, as they could be confusing for most users.
Also as the interface of the command is now mostly finalized,
we can add more documentation and more testcases to make sure
the command will continue to work as designed in the future.
We only document the rev-list related options among all the
revision related options that are now accepted, as the rev-list
related ones are probably the most useful for now.
Helped-by: Dragan Simic <dsimic@manjaro.org>
Helped-by: Linus Arver <linusa@google.com>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want this command to be a minimal command that just does server side
picking of commits, displaying the results on stdout for higher level
scripts to consume.
So let's simplify it:
* remove the worktree and index reading/writing,
* remove the ref (and reflog) updating,
* remove the assumptions tying us to HEAD, since (a) this is not a
rebase and (b) we want to be able to pick commits in a bare repo,
i.e. to/from branches that are not checked out and not the main
branch,
* remove unneeded includes,
* handle rebasing multiple branches by printing on stdout the update
ref commands that should be performed.
The output can be piped into `git update-ref --stdin` for the ref
updates to happen.
In the future to make it easier for users to use this command
directly maybe an option can be added to automatically pipe its output
into `git update-ref`.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, this is just a rename from `t/helper/test-fast-rebase.c` into
`builtin/replay.c` with minimal changes to make it build appropriately.
Let's add a stub documentation and a stub test script though.
Subsequent commits will flesh out the capabilities of the new command
and make it a more standard regular builtin.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7a5d604443 (commit: detect commits that exist in commit-graph but not
in the ODB, 2023-10-31), we have introduced a new object existence check
into `repo_parse_commit_internal()` so that we do not parse commits via
the commit-graph that don't have a corresponding object in the object
database. This new check of course comes with a performance penalty,
which the commit put at around 30% for `git rev-list --topo-order`. But
there are in fact scenarios where the performance regression is even
higher. The following benchmark against linux.git with a fully-build
commit-graph:
Benchmark 1: git.v2.42.1 rev-list --count HEAD
Time (mean ± σ): 658.0 ms ± 5.2 ms [User: 613.5 ms, System: 44.4 ms]
Range (min … max): 650.2 ms … 666.0 ms 10 runs
Benchmark 2: git.v2.43.0-rc1 rev-list --count HEAD
Time (mean ± σ): 1.333 s ± 0.019 s [User: 1.263 s, System: 0.069 s]
Range (min … max): 1.302 s … 1.361 s 10 runs
Summary
git.v2.42.1 rev-list --count HEAD ran
2.03 ± 0.03 times faster than git.v2.43.0-rc1 rev-list --count HEAD
While it's a noble goal to ensure that results are the same regardless
of whether or not we have a potentially stale commit-graph, taking twice
as much time is a tough sell. Furthermore, we can generally assume that
the commit-graph will be updated by git-gc(1) or git-maintenance(1) as
required so that the case where the commit-graph is stale should not at
all be common.
With that in mind, default-disable GIT_COMMIT_GRAPH_PARANOIA and restore
the behaviour and thus performance previous to the mentioned commit. In
order to not be inconsistent, also disable this behaviour by default in
`lookup_commit_in_graph()`, where the object existence check has been
introduced right at its inception via f559d6d45e (revision: avoid
hitting packfiles when commits are in commit-graph, 2021-08-09).
This results in another speedup in commands that end up calling this
function, even though it's less pronounced compared to the above
benchmark. The following has been executed in linux.git with ~1.2
million references:
Benchmark 1: GIT_COMMIT_GRAPH_PARANOIA=true git rev-list --all --no-walk=unsorted
Time (mean ± σ): 2.947 s ± 0.003 s [User: 2.412 s, System: 0.534 s]
Range (min … max): 2.943 s … 2.949 s 3 runs
Benchmark 2: GIT_COMMIT_GRAPH_PARANOIA=false git rev-list --all --no-walk=unsorted
Time (mean ± σ): 2.724 s ± 0.030 s [User: 2.207 s, System: 0.514 s]
Range (min … max): 2.704 s … 2.759 s 3 runs
Summary
GIT_COMMIT_GRAPH_PARANOIA=false git rev-list --all --no-walk=unsorted ran
1.08 ± 0.01 times faster than GIT_COMMIT_GRAPH_PARANOIA=true git rev-list --all --no-walk=unsorted
So whereas 7a5d604443 initially introduced the logic to start doing an
object existence check in `repo_parse_commit_internal()` by default, the
updated logic will now instead cause `lookup_commit_in_graph()` to stop
doing the check by default. This behaviour continues to be tweakable by
the user via the GIT_COMMIT_GRAPH_PARANOIA environment variable.
Note that this requires us to amend some tests to manually turn on the
paranoid checks again. This is because we cause repository corruption by
manually deleting objects which are part of the commit graph already.
These circumstances shouldn't usually happen in repositories.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Beyond the fact that it's somewhat traditional to respect sites'
self-identification, it's helpful for links to point to the things
that people expect them to reference. Here that means linking to
specific pages instead of a domain.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These sites offer https versions of their content.
Using the https versions provides some protection for users.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's somewhat traditional to respect sites' self-identification.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To orphan is a verb that denotes the act of getting on an unborn
branch, and a few references to "orphan branch" in our documentation
are misuses of the word. They caused end-user confusion, which was
made even worse because we did not have the term defined in the
glossary document. Add entries for "unborn" branch and "orphan"
operation to the glossary, and adjust existing documentation
accordingly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to use other diff algorithms than the 'myers'
default algorithm, when using the 'git merge-file' command, to help
avoid spurious conflicts by selecting a more recent algorithm such
as 'histogram', for instance when using 'git merge-file' as part of
a custom merge driver.
Signed-off-by: Antonin Delpeuch <antonin@delpeuch.eu>
Reviewed-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"To dereference" and "to peel" were sometimes used in in-code
comments and documentation but without description in the glossary.
* vd/glossary-dereference-peel:
glossary: add definitions for dereference & peel
The following commit will make use of a Getopt::Long feature which is
only present in Perl >= 5.8.1. Document that as the minimum version we
support.
Many of our Perl scripts will continue to run with 5.8.0 but this change
allows us to adjust them as needed without breaking any promises to our
users.
The Perl requirement was last changed in d48b284183 (perl: bump the
required Perl version to 5.8 from 5.6.[21], 2010-09-24). At that time,
5.8.0 was 8 years old. It is now over 21 years old.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most builtins ('rev-parse <revision>^{}', 'show-ref --dereference'),
"dereferencing" a tag refers to a recursive peel of the tag object. Unlike
these cases, the dereferencing prefix ('*') in 'for-each-ref' format
specifiers triggers only a single, non-recursive dereference of a given tag
object. For most annotated tags, a single dereference is all that is needed
to access the tag's associated commit or tree; "recursive" and
"non-recursive" dereferencing are functionally equivalent in these cases.
However, nested tags (annotated tags whose target is another annotated tag)
dereferenced once return another tag, where a recursive dereference would
return the commit or tree.
Currently, if a user wants to filter & format refs and include information
about a recursively-dereferenced tag, they can do so with something like
'cat-file --batch-check':
git for-each-ref --format="%(objectname)^{} %(refname)" <pattern> |
git cat-file --batch-check="%(objectname) %(rest)"
But the combination of commands is inefficient. So, to improve the
performance of this use case and align the defererencing behavior of
'for-each-ref' with that of other commands, update the ref formatting code
to use the peeled tag (from 'peel_iterated_oid()') to populate '*' fields
rather than the tag's immediate target object (from 'get_tagged_oid()').
Additionally, add a test to 't6300-for-each-ref' to verify new nested tag
behavior and update 't6302-for-each-ref-filter.sh' to print the correct
value for nested dereferenced fields.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the description of the `*` prefix from the --format option
documentation to the part of the command documentation that deals with other
object type-specific modifiers. Also reorganize and reword the remaining
--format documentation so that the explanation of the default format doesn't
interrupt the details on format string interpolation.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the description of the rebase --(no-)autosquash options to try
to make it a bit clearer. Don't use "the '...'" to refer to part of a
commit message, mention how --interactive can be used to review the
todo list, and add a bit more detail on commit --squash/amend.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase --autosquash option is quietly ignored when used without
--interactive (apart from preventing preemptive fast-forwarding and
triggering conflicts with apply backend options).
Change that to support --autosquash without --interactive, by dropping
its restriction to REBASE_INTERACTIVE_EXCPLICIT mode. When used this
way, auto-squashing is done without opening the todo list editor.
Drop the -i requirement from the --autosquash description, and amend
t3415-rebase-autosquash.sh to test the option and the rebase.autoSquash
config variable with and without -i.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting the rebase.autoSquash config variable to true implies a couple
of restrictions: it prevents preemptive fast-forwarding and it triggers
conflicts with apply backend options. However, it only actually results
in auto-squashing when combined with the --interactive (or -i) option,
due to code in run_specific_rebase() that disables auto-squashing unless
the REBASE_INTERACTIVE_EXPLICIT flag is set.
Doing autosquashing for rebase.autoSquash without --interactive would be
problematic in terms of backward compatibility, but conversely, there is
no need for the aforementioned restrictions without --interactive.
So drop the options.config_autosquash check from the conditions for
clearing allow_preemptive_ff, as the case where it is combined with
--interactive is already covered by the REBASE_INTERACTIVE_EXPLICIT
flag check above it.
Also drop the "apply options are incompatible with rebase.autoSquash"
error, because it is unreachable if it is restricted to --interactive,
as apply options already cause an error when used with --interactive.
Drop the tests for the error from t3422-rebase-incompatible-options.sh,
which has separate tests for the conflicts of --interactive with apply
options.
When neither --autosquash nor --no-autosquash are given, only set
options.autosquash to true if rebase.autosquash is combined with
--interactive.
Don't initialize options.config_autosquash to -1, as there is no need to
distinguish between rebase.autoSquash being unset or explicitly set to
false.
Finally, amend the rebase.autoSquash documentation to say it only
affects interactive mode.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'gitglossary' definitions for "dereference" (as it used for both symrefs
and objects) and "peel". These terms are used in options and documentation
throughout Git, but they are not clearly defined anywhere and the behavior
they refer to depends heavily on context. Provide explicit definitions to
clarify existing documentation to users and help contributors to use the
most appropriate terminology possible in their additions to Git.
Update other definitions in the glossary that use the term "dereference" to
link to 'def_dereference'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our current testing environment, we spend a significant amount of
effort crafting end-to-end tests for error conditions that could easily
be captured by unit tests (or we simply forgo some hard-to-setup and
rare error conditions). Describe what we hope to accomplish by
implementing unit tests, and explain some open questions and milestones.
Discuss desired features for test frameworks/harnesses, and provide a
comparison of several different frameworks. Finally, document our
rationale for implementing a custom framework.
Co-authored-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-file" learns a mode to read three contents to be merged
from blob objects.
* bc/merge-file-object-input:
merge-file: add an option to process object IDs
git-merge-file doc: drop "-file" from argument placeholders
Teach "git show-ref" a mode to check the existence of a ref.
* ps/show-ref:
t: use git-show-ref(1) to check for ref existence
builtin/show-ref: add new mode to check for reference existence
builtin/show-ref: explicitly spell out different modes in synopsis
builtin/show-ref: ensure mutual exclusiveness of subcommands
builtin/show-ref: refactor options for patterns subcommand
builtin/show-ref: stop using global vars for `show_one()`
builtin/show-ref: stop using global variable to count matches
builtin/show-ref: refactor `--exclude-existing` options
builtin/show-ref: fix dead code when passing patterns
builtin/show-ref: fix leaking string buffer
builtin/show-ref: split up different subcommands
builtin/show-ref: convert pattern to a local variable
The codepath to traverse the commit-graph learned to notice that a
commit is missing (e.g., corrupt repository lost an object), even
though it knows something about the commit (like its parents) from
what is in commit-graph.
* ps/do-not-trust-commit-graph-blindly-for-existence:
commit: detect commits that exist in commit-graph but not in the ODB
commit-graph: introduce envvar to disable commit existence checks
Offer a slightly more verbose description of the issue fixed by
7144dee3ec (credential/libsecret: erase matching creds only, 2023-07-26)
and cb626f8e5c (credential/wincred: erase matching creds only,
2023-07-26).
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References from description of the `--patch` option in various
manual pages have been simplified and improved.
* so/diff-doc-for-patch-update:
doc/diff-options: fix link to generating patch section
Overly long label names used in the sequencer machinery are now
chopped to fit under filesystem limitation.
* mp/rebase-label-length-limit:
rebase: allow overriding the maximal length of the generated labels
sequencer: truncate labels to accommodate loose refs
git merge-file knows how to merge files on the file system already. It
would be helpful, however, to allow it to also merge single blobs.
Teach it an `--object-id` option which means that its arguments are
object IDs and not files to allow it to do so.
We handle the empty blob specially since read_mmblob doesn't read it
directly and otherwise users cannot specify an empty ancestor.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git merge-file` takes three positional arguments. Each of them is
documented as `<foo-file>`. In preparation for teaching this command to
alternatively take three object IDs, make these placeholders a bit more
generic by dropping the "-file" parts. Instead, clarify early that the
three arguments are filenames. Even after the next commit, we can afford
to present this file-centric view up front and in the general
discussion, since it will remain the default one.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in 32f3c541e3 (multi-pack-index: write pack names in chunk,
2018-07-12) the MIDX's "Packfile Names" (or "PNAM", for short) chunk was
described as containing an array of string entries. e0d1bcf825 notes
that this is the only chunk in the MIDX format's specification that is
not guaranteed to be 4-byte aligned, and so should be placed last.
This isn't quite accurate: the entries within the PNAM chunk are not
guaranteed to be 4-byte aligned since they are arbitrary strings, but
the chunk itself is 4-byte aligned since the ending is padded with NUL
bytes.
That padding has always been there since 32f3c541e3 via
midx.c::write_midx_pack_names(), which ended with:
i = MIDX_CHUNK_ALIGNMENT - (written % MIDX_CHUNK_ALIGNMENT)
if (i < MIDX_CHUNK_ALIGNMENT) {
unsigned char padding[MIDX_CHUNK_ALIGNMENT];
memset(padding, 0, sizeof(padding))
hashwrite(f, padding, i);
written += i;
}
In fact, 32f3c541e3's log message itself describes the chunk in its
first paragraph with:
Since filenames are not well structured, add padding to keep good
alignment in later chunks.
So these have always been externally aligned. Correct the corresponding
part of our documentation to reflect that.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e0d1bcf825 (multi-pack-index: add format details, 2018-07-12) describes
the MIDX's "PNAM" chunk as having entries which are "null-terminated
strings".
This is a typo, as strings are terminated with a NUL character, which is
a distinct concept from "NULL" or "null", which we typically reserve for
the void pointer to address 0.
Correct the documentation accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we have multiple ways to show the value of a given reference, we
do not have any way to check whether a reference exists at all. While
commands like git-rev-parse(1) or git-show-ref(1) can be used to check
for reference existence in case the reference resolves to something
sane, neither of them can be used to check for existence in some other
scenarios where the reference does not resolve cleanly:
- References which have an invalid name cannot be resolved.
- References to nonexistent objects cannot be resolved.
- Dangling symrefs can be resolved via git-symbolic-ref(1), but this
requires the caller to special case existence checks depending on
whether or not a reference is symbolic or direct.
Furthermore, git-rev-list(1) and other commands do not let the caller
distinguish easily between an actually missing reference and a generic
error.
Taken together, this seems like sufficient motivation to introduce a
separate plumbing command to explicitly check for the existence of a
reference without trying to resolve its contents.
This new command comes in the form of `git show-ref --exists`. This
new mode will exit successfully when the reference exists, with a
specific exit code of 2 when it does not exist, or with 1 when there
has been a generic error.
Note that the only way to properly implement this command is by using
the internal `refs_read_raw_ref()` function. While the public function
`refs_resolve_ref_unsafe()` can be made to behave in the same way by
passing various flags, it does not provide any way to obtain the errno
with which the reference backend failed when reading the reference. As
such, it becomes impossible for us to distinguish generic errors from
the explicit case where the reference wasn't found.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis treats the `--verify` and the implicit mode the same. They
are slightly different though:
- They accept different sets of flags.
- The implicit mode accepts patterns while the `--verify` mode
accepts references.
Split up the synopsis for these two modes such that we can disambiguate
those differences.
While at it, drop "--quiet" from the pattern mode's synopsis. It does
not make a lot of sense to list patterns, but squelch the listing output
itself. The description for "--quiet" is adapted accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our `lookup_commit_in_graph()` helper tries to look up commits from the
commit graph and, if it doesn't exist there, falls back to parsing it
from the object database instead. This is intended to speed up the
lookup of any such commit that exists in the database. There is an edge
case though where the commit exists in the graph, but not in the object
database. To avoid returning such stale commits the helper function thus
double checks that any such commit parsed from the graph also exists in
the object database. This makes the function safe to use even when
commit graphs aren't updated regularly.
We're about to introduce the same pattern into other parts of our code
base though, namely `repo_parse_commit_internal()`. Here the extra
sanity check is a bit of a tougher sell: `lookup_commit_in_graph()` was
a newly introduced helper, and as such there was no performance hit by
adding this sanity check. If we added `repo_parse_commit_internal()`
with that sanity check right from the beginning as well, this would
probably never have been an issue to begin with. But by retrofitting it
with this sanity check now we do add a performance regression to
preexisting code, and thus there is a desire to avoid this or at least
give an escape hatch.
In practice, there is no inherent reason why either of those functions
should have the sanity check whereas the other one does not: either both
of them are able to detect this issue or none of them should be. This
also means that the default of whether we do the check should likely be
the same for both. To err on the side of caution, we thus rather want to
make `repo_parse_commit_internal()` stricter than to loosen the checks
that we already have in `lookup_commit_in_graph()`.
The escape hatch is added in the form of a new GIT_COMMIT_GRAPH_PARANOIA
environment variable that mirrors GIT_REF_PARANOIA. If enabled, which is
the default, we will double check that commits looked up in the commit
graph via `lookup_commit_in_graph()` also exist in the object database.
This same check will also be added in `repo_parse_commit_internal()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath to handle recipient addresses `git send-email
--compose` learns from the user was completely broken, which has
been corrected.
* jk/send-email-fix-addresses-from-composed-messages:
send-email: handle to/cc/bcc from --compose message
Revert "send-email: extract email-parsing code into a subroutine"
doc/send-email: mention handling of "reply-to" with --compose
The attribute subsystem learned to honor `attr.tree` configuration
that specifies which tree to read the .gitattributes files from.
* jc/attr-tree-config:
attr: add attr.tree for setting the treeish to read attributes from
attr: read attributes from HEAD when bare repo
Many typos, ungrammatical sentences and wrong phrasing have been
fixed.
* sn/typo-grammo-phraso-fixes:
t/README: fix multi-prerequisite example
doc/gitk: s/sticked/stuck/
git-jump: admit to passing merge mode args to ls-files
doc/diff-options: improve wording of the log.diffMerges mention
doc: fix some typos, grammar and wording issues
Use parentheses and pipes to present alternatives in the argument help
for the --empty options of git am and git rebase, like in the rest of
the documentation.
While at it remove a stray use of the enum empty_action value
STOP_ON_EMPTY_COMMIT to indicate that no short option is present.
While it has a value of 0 and thus there is no user-visible change,
that enum is not meant to hold short option characters. Hard-code 0,
like we do for other options without a short option.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tutorial in Documentation/MyFirstContribution.txt has steps to print
some text using the "_" function. However, this leads to compiler errors
when running "make" since "gettext.h" is not #included.
Update docs with a note to #include "gettext.h" in "builtin/psuh.c".
Signed-off-by: Jacob Stopak <jacob@initialcommit.io>
Reviewed-by: Emily Shaffer <nasamuffin@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/SubmittingPatches informs the contributor that gitk's
context menu command "Copy commit summary" can be used to obtain the
conventional format of referencing existing commits. This command in
gitk was renamed to "Copy commit reference" in commit [1], following
implementation of Git's "reference" pretty format in [2].
Update mention of this gitk command in Documentation/SubmittingPatches
to its new name.
[1] b8b60957ce (gitk: rename "commit summary" to "commit reference",
2019-12-12)
[2] commit 1f0fc1d (pretty: implement 'reference' format, 2019-11-20)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the `git bisect run` command syntax at the beginning
of the manpage is `git bisect run <cmd>...`, which isn't quite clear
about what `<cmd>` is or what the `...` mean; one could think that it is
the whole (quoted) command line with all arguments in a single string,
or that it supports multiple commands, or that it doesn't accept
commands with arguments at all.
Change to `git bisect run <cmd> [<arg>...]` to clarify the syntax,
in both the manpage and the `git bisect -h` command output.
Additionally, change `--term-{new,bad}` et al to `--term-(new|bad)`
for consistency with the synopsis syntax conventions.
Signed-off-by: Javier Mora <cousteaulecommandant@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-v" option is shown in the SYNOPSIS section near the top, but
"-q" is not shown anywhere there.
List "-q" alongside "-v".
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user writes a message via --compose, send-email will pick up
various headers like "From", "Subject", etc and use them for other
patches as if they were specified on the command-line. But we don't
handle "To", "Cc", or "Bcc" this way; we just tell the user "those
aren't interpeted yet" and ignore them.
But it seems like an obvious thing to want, especially as the same
feature exists when the cover letter is generated separately by
format-patch. There it is gated behind the --to-cover option, but I
don't think we'd need the same control here; since we generate the
--compose template ourselves based on the existing input, if the user
leaves the lines unchanged then the behavior remains the same.
So let's fill in the implementation; like those other headers we already
handle, we just need to assign to the initial_* variables. The only
difference in this case is that they are arrays, so we'll feed them
through parse_address_line() to split them (just like we would when
reading a single string via prompting).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-send-email lists the headers handled specially
by --compose in a way that implies that this is the complete set of
headers that are special. But one more was added by d11c943c78
(send-email: support separate Reply-To address, 2018-03-04) and never
documented.
Let's add it, and reword the documentation slightly to avoid having to
specify the list of headers twice (as it is growing and will continue to
do so as we add new features).
If you read the code, you may notice that we also handle MIME-Version
specially, in that we'll avoid over-writing user-provided MIME headers.
I don't think this is worth mentioning, as it's what you'd expect to
happen (as opposed to the other headers, which are picked up to be used
in later emails). And certainly this feature existed when the
documentation was expanded in 01d3861217 (git-send-email.txt: describe
--compose better, 2009-03-16), and we chose not to mention it then.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git am` passes the value given to its `--whitespace` option through
to the underlying `git apply`, and the value is called <action> over
there. Fix the documentation for the command that calls the value
<option> to say <action> instead.
Note that the option help given by `git am -h` already calls the
value <action>, so there is no need to make a matching change there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git repack" learned "--max-cruft-size" to prevent cruft packs from
growing without bounds.
* tb/repack-max-cruft-size:
repack: free existing_cruft array after use
builtin/repack.c: avoid making cruft packs preferred
builtin/repack.c: implement support for `--max-cruft-size`
builtin/repack.c: parse `--max-pack-size` with OPT_MAGNITUDE
t7700: split cruft-related tests to t7704
The documentation for geometric repacking mentions a "--unpacked" option
that supposedly changes how loose objects are rolled up. This option has
never existed, and the implied behaviour, namely to include all unpacked
objects into the resulting packfile, is in fact the default behaviour.
Correct the documentation to not mention this option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `-g` switch is a shorthand for `--geometric=` and allows the user to
specify the geometric. The documentation is wrong though and indicates
that the syntax for the shorthand is `-g=<factor>`. In fact though, the
option must be specified without the equals sign via `-g<factor>`.
Fix the syntax accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test coverage for trailers has been improved.
* la/trailer-test-and-doc-updates:
trailer doc: <token> is a <key> or <keyAlias>, not both
trailer doc: separator within key suppresses default separator
trailer doc: emphasize the effect of configuration variables
trailer --unfold help: prefer "reformat" over "join"
trailer --parse docs: add explanation for its usefulness
trailer --only-input: prefer "configuration variables" over "rules"
trailer --parse help: expose aliased options
trailer --no-divider help: describe usual "---" meaning
trailer: trailer location is a place, not an action
trailer doc: narrow down scope of --where and related flags
trailer: add tests to check defaulting behavior with --no-* flags
trailer test description: this tests --where=after, not --where=before
trailer tests: make test cases self-contained
44451a2 (attr: teach "--attr-source=<tree>" global option to "git",
2023-05-06) provided the ability to pass in a treeish as the attr
source. In the context of serving Git repositories as bare repos like we
do at GitLab however, it would be easier to point --attr-source to HEAD
for all commands by setting it once.
Add a new config attr.tree that allows this.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some references are special in the context of worktrees as they are
considered to be per-worktree instead of shared across all of the
worktrees. Most importantly, this includes "refs/worktree/" that have
explicitly been designed such that users can create per-woorktree refs.
But there are also special references that have an associated meaning
like "refs/bisect/", which is used to track state of git-bisect(1).
These special per-worktree references are documented in git-worktree(1),
but one instance is missing. In a9be29c981 (sequencer: make refs
generated by the `label` command worktree-local, 2018-04-25), we have
converted "refs/rewritten/" to be a per-worktree reference as well.
These references are used by our sequencer infrastructure to generate
labels for rebased commits. So in order to allow for multiple concurrent
rebases to happen in different worktrees, these references need to be
tracked per worktree.
We forgot to update our documentation to mention these new per-worktree
references, which is fixed by this patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option provides a shortcut to request diff with respect to first
parent for any kind of commit, universally. It's implemented as pure
synonym for "--diff-merges=first-parent --patch".
Gives user quick and universal way to see what changes, exactly, were
brought to a branch by merges as well as by regular commits.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Put descriptions of convenience shortcuts first, so they are the
first things reader observes rather than lengthy detailed stuff.
* Get rid of very long line containing all the --diff-merges formats
by replacing them with <format>, and putting each supported format
on its own line.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DESCRIPTION's "first form" is actually the 1st, 2nd, 3rd and 5th
form in SYNOPSIS, the "second form" is the 4th one.
Interestingly, this state of affairs was introduced in
97fe725075 (cat-file docs: fix SYNOPSIS and "-h" output, 2021-12-28)
with the claim of "Now the two will match again." ("the two" being
DESCRIPTION and SYNOPSIS)...
The description also suffers from other correctness and clarity issues,
e.g., the "first form" paragraph discusses -p, -s and -t, but leaves out
-e, which is included in the corresponding SYNOPSIS section; the second
paragraph mentions <format>, which doesn't occur in SYNOPSIS at all, and
of the three batch options, really only describes the behavior of
--batch-check. Also the mention of "drivers" seems an implementation
detail not adding much clarity in a short summary (and isn't expanded
upon in the rest of the man page, either).
Rather than trying to maintain one-to-one (or N-to-M) correspondence
between the DESCRIPTION and SYNOPSIS forms, creating duplication and
providing opportunities for error, shorten the former into a concise
summary describing the two general modes of operation: batch and
non-batch, leaving details to the subsequent manual sections.
While here, fix a grammar error in the description of -e and make the
following further minor improvements:
NAME:
shorten ("content or type and size" isn't the whole story; say
"details" and leave the actual details to later sections)
SYNOPSIS and --help:
move the (--textconv | --filters) form before --batch, closer
to the other non-batch forms
Signed-off-by: Štěpán Němec <stepnem@smrk.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The soft limit of the first line of the commit message should be
"no more than 50 characters" or "50 characters or less", but not
"less than 50 character".
This is an addition to commit c2c349a15c (doc: correct the 50 characters
soft limit, 2023-09-28).
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of extraneous whitespace, replace tab-after-fullstop with
space, etc.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No disrespect to other mailing list archives, but the local part of
their URLs will become pretty much meaningless once the archives go
out of service, and we learned the lesson hard way when $gmane
stopped serving.
Let's point into https://lore.kernel.org/ for an article that can be
found there, because the local part of the URL has the Message-Id:
that can be used to find the same message in other archives, even if
lore goes down.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cruft packs are an alternative mechanism for storing a collection of
unreachable objects whose mtimes are recent enough to avoid being
pruned out of the repository.
When cruft packs were first introduced back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20) and
a7d493833f (builtin/pack-objects.c: --cruft with expiration,
2022-05-20), the recommended workflow consisted of:
- Repacking periodically, either by packing anything loose in the
repository (via `git repack -d`) or producing a geometric sequence
of packs (via `git repack --geometric=<d> -d`).
- Every so often, splitting the repository into two packs, one cruft
to store the unreachable objects, and another non-cruft pack to
store the reachable objects.
Repositories may (out of band with the above) choose periodically to
prune out some unreachable objects which have aged out of the grace
period by generating a pack with `--cruft-expiration=<approxidate>`.
This allowed repositories to maintain relatively few packs on average,
and quarantine unreachable objects together in a cruft pack, avoiding
the pitfalls of holding unreachable objects as loose while they age out
(for more, see some of the details in 3d89a8c118
(Documentation/technical: add cruft-packs.txt, 2022-05-20)).
This all works, but can be costly from an I/O-perspective when
frequently repacking a repository that has many unreachable objects.
This problem is exacerbated when those unreachable objects are rarely
(if every) pruned.
Since there is at most one cruft pack in the above scheme, each time we
update the cruft pack it must be rewritten from scratch. Because much of
the pack is reused, this is a relatively inexpensive operation from a
CPU-perspective, but is very costly in terms of I/O since we end up
rewriting basically the same pack (plus any new unreachable objects that
have entered the repository since the last time a cruft pack was
generated).
At the time, we decided against implementing more robust support for
multiple cruft packs. This patch implements that support which we were
lacking.
Introduce a new option `--max-cruft-size` which allows repositories to
accumulate cruft packs up to a given size, after which point a new
generation of cruft packs can accumulate until it reaches the maximum
size, and so on. To generate a new cruft pack, the process works like
so:
- Sort a list of any existing cruft packs in ascending order of pack
size.
- Starting from the beginning of the list, group cruft packs together
while the accumulated size is smaller than the maximum specified
pack size.
- Combine the objects in these cruft packs together into a new cruft
pack, along with any other unreachable objects which have since
entered the repository.
Once a cruft pack grows beyond the size specified via `--max-cruft-size`
the pack is effectively frozen. This limits the I/O churn up to a
quadratic function of the value specified by the `--max-cruft-size`
option, instead of behaving quadratically in the number of total
unreachable objects.
When pruning unreachable objects, we bypass the new code paths which
combine small cruft packs together, and instead start from scratch,
passing in the appropriate `--max-pack-size` down to `pack-objects`,
putting it in charge of keeping the resulting set of cruft packs sized
correctly.
This may seem like further I/O churn, but in practice it isn't so bad.
We could prune old cruft packs for whom all or most objects are removed,
and then generate a new cruft pack with just the remaining set of
objects. But this additional complexity buys us relatively little,
because most objects end up being pruned anyway, so the I/O churn is
well contained.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The terminology was changed in b0d12fc9b2 (Use the word 'stuck'
instead of 'sticked').
Signed-off-by: Štěpán Němec <stepnem@smrk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the grammar ("which default value is") and reword to match other
similar descriptions (say "configuration variable" instead of
"parameter", link to git-config(1)).
Signed-off-by: Štěpán Němec <stepnem@smrk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-ref" and friends learn to apply mailmap to authorname
and other fields.
* ks/ref-filter-mailmap:
ref-filter: add mailmap support
t/t6300: introduce test_bad_atom
t/t6300: cleanup test_atom
"git rev-list --stdin" learned to take non-revisions (like "--not")
recently from the standard input, but the way such a "--not" was
handled was quite confusing, which has been rethought. This is
potentially a change that breaks backward compatibility.
* ps/revision-cmdline-stdin-not:
revision: make pseudo-opt flags read via stdin behave consistently
The list of additional XY values for submodules in short format
isn't formatted consistently with the rest of the document.
Format as list for consistency.
Signed-off-by: Javier Mora <cousteaulecommandant@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit implemented the `gc.repackFilter` config option
to specify a filter that should be used by `git gc` when
performing repacks.
Another previous commit has implemented
`git repack --filter-to=<dir>` to specify the location of the
packfile containing filtered out objects when using a filter.
Let's implement the `gc.repackFilterTo` config option to specify
that location in the config when `gc.repackFilter` is used.
Now when `git gc` will perform a repack with a <dir> configured
through this option and not empty, the repack process will be
passed a corresponding `--filter-to=<dir>` argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit has implemented `git repack --filter=<filter-spec>` to
allow users to filter out some objects from the main pack and move them
into a new different pack.
It would be nice if this new different pack could be created in a
different directory than the regular pack. This would make it possible
to move large blobs into a pack on a different kind of storage, for
example cheaper storage.
Even in a different directory, this pack can be accessible if, for
example, the Git alternates mechanism is used to point to it. In fact
not using the Git alternates mechanism can corrupt a repo as the
generated pack containing the filtered objects might not be accessible
from the repo any more. So setting up the Git alternates mechanism
should be done before using this feature if the user wants the repo to
be fully usable while this feature is used.
In some cases, like when a repo has just been cloned or when there is no
other activity in the repo, it's Ok to setup the Git alternates
mechanism afterwards though. It's also Ok to just inspect the generated
packfile containing the filtered objects and then just move it into the
'.git/objects/pack/' directory manually. That's why it's not necessary
for this command to check that the Git alternates mechanism has been
already setup.
While at it, as an example to show that `--filter` and `--filter-to`
work well with other options, let's also add a test to check that these
options work well with `--max-pack-size`.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit has implemented `git repack --filter=<filter-spec>` to
allow users to filter out some objects from the main pack and move them
into a new different pack.
Users might want to perform such a cleanup regularly at the same time as
they perform other repacks and cleanups, so as part of `git gc`.
Let's allow them to configure a <filter-spec> for that purpose using a
new gc.repackFilter config option.
Now when `git gc` will perform a repack with a <filter-spec> configured
through this option and not empty, the repack process will be passed a
corresponding `--filter=<filter-spec>` argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option puts the objects specified by `<filter-spec>` into a
separate packfile.
This could be useful if, for example, some blobs take up a lot of
precious space on fast storage while they are rarely accessed. It could
make sense to move them into a separate cheaper, though slower, storage.
It's possible to find which new packfile contains the filtered out
objects using one of the following:
- `git verify-pack -v ...`,
- `test-tool find-pack ...`, which a previous commit added,
- `--filter-to=<dir>`, which a following commit will add to specify
where the pack containing the filtered out objects will be.
This feature is implemented by running `git pack-objects` twice in a
row. The first command is run with `--filter=<filter-spec>`, using the
specified filter. It packs objects while omitting the objects specified
by the filter. Then another `git pack-objects` command is launched using
`--stdin-packs`. We pass it all the previously existing packs into its
stdin, so that it will pack all the objects in the previously existing
packs. But we also pass into its stdin, the pack created by the previous
`git pack-objects --filter=<filter-spec>` command as well as the kept
packs, all prefixed with '^', so that the objects in these packs will be
omitted from the resulting pack. The result is that only the objects
filtered out by the first `git pack-objects` command are in the pack
resulting from the second `git pack-objects` command.
As the interactions with kept packs are a bit tricky, a few related
tests are added.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9535ce7337 (pack-objects: add list-objects filtering, 2017-11-21)
taught `git pack-objects` to use `--filter`, but required the use of
`--stdout` since a partial clone mechanism was not yet in place to
handle missing objects. Since then, changes like 9e27beaa23
(promisor-remote: implement promisor_remote_get_direct(), 2019-06-25)
and others added support to dynamically fetch objects that were missing.
Even without a promisor remote, filtering out objects can also be useful
if we can put the filtered out objects in a separate pack, and in this
case it also makes sense for pack-objects to write the packfile directly
to an actual file rather than on stdout.
Remove the `--stdout` requirement when using `--filter`, so that in a
follow-up commit, repack can pass `--filter` to pack-objects to omit
certain objects from the resulting packfile.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"checkout --merge -- path" and "update-index --unresolve path" did
not resurrect conflicted state that was resolved to remove path,
but now they do.
* jc/unresolve-removal:
checkout: allow "checkout -m path" to unmerge removed paths
checkout/restore: add basic tests for --merge
checkout/restore: refuse unmerging paths unless checking out of the index
update-index: remove stale fallback code for "--unresolve"
update-index: use unmerge_index_entry() to support removal
resolve-undo: allow resurrecting conflicted state that resolved to deletion
update-index: do not read HEAD and MERGE_HEAD unconditionally
"git range-diff --notes=foo" compared "log --notes=foo --notes" of
the two ranges, instead of using just the specified notes tree.
* kh/range-diff-notes:
range-diff: treat notes like `log`
"git diff" learned diff.statNameWidth configuration variable, to
give the default width for the name part in the "--stat" output.
* ds/stat-name-width-configuration:
diff --stat: add config option to limit filename width
The soft limit of the first line of the commit message should be
"no more than 50 characters" or "50 characters or less", but not
"less than 50 character".
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add mailmap support to ref-filter formats which are similar in
pretty. This support is such that the following pretty placeholders are
equivalent to the new ref-filter atoms:
%aN = authorname:mailmap
%cN = committername:mailmap
%aE = authoremail:mailmap
%aL = authoremail:mailmap,localpart
%cE = committeremail:mailmap
%cL = committeremail:mailmap,localpart
Additionally, mailmap can also be used with ":trim" option for email by
doing something like "authoremail:mailmap,trim".
The above also applies for the "tagger" atom, that is,
"taggername:mailmap", "taggeremail:mailmap", "taggeremail:mailmap,trim"
and "taggername:mailmap,localpart".
The functionality of ":trim" and ":localpart" remains the same. That is,
":trim" gives the email, but without the angle brackets and ":localpart"
gives the part of the email before the '@' character (if such a
character is not found then we directly grab everything between the
angle brackets).
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading revisions from stdin via git-rev-list(1)'s `--stdin` option
then these revisions never honor flags like `--not` which have been
passed on the command line. Thus, an invocation like e.g. `git rev-list
--all --not --stdin` will not treat all revisions read from stdin as
uninteresting. While this behaviour may be surprising to a user, it's
been this way ever since it has been introduced via 42cabc341c (Teach
rev-list an option to read revs from the standard input., 2006-09-05).
With that said, in c40f0b7877 (revision: handle pseudo-opts in `--stdin`
mode, 2023-06-15) we have introduced a new mode to read pseudo opts from
standard input where this behaviour is a lot more confusing. If you pass
`--not` via stdin, it will:
- Influence subsequent revisions or pseudo-options passed on the
command line.
- Influence pseudo-options passed via standard input.
- _Not_ influence normal revisions passed via standard input.
This behaviour is extremely inconsistent and bound to cause confusion.
While it would be nice to retroactively change the behaviour for how
`--not` and `--stdin` behave together, chances are quite high that this
would break existing scripts that expect the current behaviour that has
been around for many years by now. This is thus not really a viable
option to explore to fix the inconsistency.
Instead, we change the behaviour of how pseudo-opts read via standard
input influence the flags such that the effect is fully localized. With
this change, when reading `--not` via standard input, it will:
- _Not_ influence subsequent revisions or pseudo-options passed on
the command line, which is a change in behaviour.
- Influence pseudo-options passed via standard input.
- Influence normal revisions passed via standard input, which is a
change in behaviour.
Thus, all flags read via standard input are fully self-contained to that
standard input, only.
While this is a breaking change as well, the behaviour has only been
recently introduced with Git v2.42.0. Furthermore, the current behaviour
can be regarded as a simple bug. With that in mind it feels like the
right thing to retroactively change it and make the behaviour sane.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reported-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index" learns "--show-index-version" to inspect
the index format version used by the on-disk index file.
* jc/update-index-show-index-version:
test-tool: retire "index-version"
update-index: add --show-index-version
update-index doc: v4 is OK with JGit and libgit2
While git show accepts options that apply to the git diff-tree command,
some options do not make sense in the context of git show.
The options of git show are handled using the machinery of git log.
The git log manual page is a better place to look into than git diff-tree
for options that are not in the git show manual page.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, `range-diff` shows the default notes if no notes-related
arguments are given. This is also how `log` behaves. But unlike
`range-diff`, `log` does *not* show the default notes if
`--notes=<custom>` are given. In other words, this:
git log --notes=custom
is equivalent to this:
git log --no-notes --notes=custom
While:
git range-diff --notes=custom
acts like this:
git log --notes --notes-custom
This can’t be how the user expects `range-diff` to behave given that the
man page for `range-diff` under `--[no-]notes[=<ref>]` says:
> This flag is passed to the `git log` program (see git-log(1)) that
> generates the patches.
This behavior also affects `format-patch` since it uses `range-diff` for
the cover letter. Unlike `log`, though, `format-patch` is not supposed
to show the default notes if no notes-related arguments are given.[1]
But this promise is broken when the range-diff happens to have something
to say about the changes to the default notes, since that will be shown
in the cover letter.
Remedy this by introducing `--show-notes-by-default` that `range-diff` can
use to tell the `log` subprocess what to do.
§ Authors
• Fix by Johannes
• Tests by Kristoffer
† 1: See e.g. 66b2ed09c2 (Fix "log" family not to be too agressive about
showing notes, 2010-01-20).
Co-authored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new configuration option diff.statNameWidth=<width> that is equivalent
to the command-line option --stat-name-width=<width>, but it is ignored
by format-patch. This follows the logic established by the already
existing configuration option diff.statGraphWidth=<width>.
Limiting the widths of names and graphs in the --stat output makes sense
for interactive work on wide terminals with many columns, hence the support
for these configuration options. They don't affect format-patch because
it already adheres to the traditional 80-column standard.
Update the documentation and add more tests to cover new configuration
option diff.statNameWidth=<width>. While there, perform a few minor code
and whitespace cleanups here and there, as spotted.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--type=<type>` was added as a prefered alias for `--<type>` by
fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`), the explanation for the path type was
reworded. Whereas the previous explanation said "expand a leading
`~`" this was changed to "adding a leading `~`". Change "adding" to
"expanding" to correctly explain the canonicalization.
Signed-off-by: Evan Gates <evan.gates@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References from description of the `--patch` option in various
manual pages have been simplified and improved.
* so/diff-doc-for-patch-update:
doc/diff-options: fix link to generating patch section
The default log message created by "git revert", when reverting a
commit that records a revert, has been tweaked.
* ob/revert-of-revert-is-reapply:
git-revert.txt: add discussion
sequencer: beautify subject of reverts of reverts
"git log --format" has been taught the %(decorate) placeholder.
* ak/pretty-decorate-more:
decorate: use commit color for HEAD arrow
pretty: add pointer and tag options to %(decorate)
pretty: add %(decorate[:<options>]) format
decorate: color each token separately
decorate: avoid some unnecessary color overhead
decorate: refactor format_decorations()
pretty-formats: enclose options in angle brackets
pretty-formats: define "literal formatting code"
We now limit depth of the tree objects and maximum length of
pathnames recorded in tree objects.
* jk/tree-name-and-depth-limit:
lower core.maxTreeDepth default to 2048
tree-diff: respect max_allowed_tree_depth
list-objects: respect max_allowed_tree_depth
read_tree(): respect max_allowed_tree_depth
traverse_trees(): respect max_allowed_tree_depth
add core.maxTreeDepth config
fsck: detect very large tree pathnames
tree-walk: rename "error" variable
tree-walk: drop MAX_TRAVERSE_TREES macro
tree-walk: reduce stack size for recursive functions
"git update-index --index-version N" is used to set the index format
version to a specific version, but there was no way to query the
current version used in the on-disk index file.
Teach the command a new "--show-index-version" option, and also
teach the "--index-version N" option to report what the version was
when run with the "--verbose" option.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Being invented in late 2012 no longer makes the index v4 format
"relatively young".
The support for the index version 4 was added to libgit2 with their
5625d86b (index: support index v4, 2016-05-17) and to JGit with
their e9cb0a8e (DirCache: support index V4, 2020-08-10).
Let's update the paragraph that discouraged its use for folks overly
cautious about cross-tool compatibility.
Helped-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--trailer` option takes a "<token>=<value>" argument, for example
--trailer "Acked-by=Bob"
And in this exampple it is understood that "Acked-by" is the <token>.
However, the user can use a shorter "ack" string by defining
configuration like
git config trailer.ack.key "Acked-by"
However, in the docs we define the above configuration as
trailer.<token>.key
so the <token> can mean either the longer "Acked-by" or the shorter
"ack".
Separate the two meanings of <token> into <key> and <keyAlias>, and
update the configuration syntax to say "trailer.<keyAlias>.key".
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sentence does not mention the effect of configuration variables at
all, when they are actively used by default (unless --parse is
specified) to potentially add new trailers, without the user having to
always supply --trailer manually.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase "join whitespace-continued values" requires some additional
context. For example, "whitespace" means newlines (not just space
characters), and "join" means to join only the multiple lines together
for a single trailer (and not that we are joining multiple trailers
together). That is, "join" means to convert
token: This is a very long value, with spaces and
newlines in it.
to
token: This is a very long value, with spaces and newlines in it.
and does not mean to convert
token: value1
token: value2
to
token: value1 value2.
Update the help text to resolve the above ambiguity. While we're add it,
update the docs to use similar language as the change in the help text.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For users who are skimming the docs to go straight to the individual
breakdown of each flag, it may not be clear why --parse is a convenience
alias (without them also looking at the other options that --parse turns
on). To save them the trouble of looking at the other options (and
computing what that would mean), describe a summary of the overall
effect.
Similarly update the area when we first mention --parse near the top of
the doc.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the phrase "configuration variables" instead of "rules" because
(1) we already say "configuration variables" in multiple
places in the docs (where the word "rules" is only used for describing
"--only-input" behavior and for an unrelated case of mentioning how
the trailers do not follow "rules for RFC 822 headers"), and
(2) this phrase is more specific than just "rules".
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the help text to say "placement" instead of "action" because the
values are placements, not actions.
While we're at it, tweak the documentation to say "placements" instead
of "values", similar to how the existing language for "--if-exists" uses
the word "action" to describe both the syntax (with the phrase
"--if-exists <action>") and the possible values (with the phrase
"possible actions").
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The wording "all configuration variables" is misleading (the same could
be said to the descriptions of the "--[no-]if-exists" and the
"--[no-]if-missing" options). Specifying --where=value overrides only
the trailer.where variable and applicable trailer.<token>.where
variables, and --no-where stops the overriding of these variables.
Ditto for the other two with their relevant configuration variables.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the "--no-where" flag is tested, the "--no-if-exists" and
"--no-if-missing" flags are not, so add tests for them. But also add
tests for all "--no-*" flags to check their effects, both when (1) there
are relevant configuration variables set, and (2) they are not set.
Signed-off-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --rfc --subject-prefix=<foo>" used to ignore the
"--subject-prefix" option and used "[RFC PATCH]"; now we will add
"RFC" prefix to whatever subject prefix is specified.
This is a backward compatible change that may deserve a note.
* dd/format-patch-rfc-updates:
format-patch: --rfc honors what --subject-prefix sets
Use of --max-pack-size to allow multiple packfiles to be created is
now supported even when we are sending unreachable objects to cruft
packs.
* tb/multi-cruft-pack:
Documentation/gitformat-pack.txt: drop mixed version section
Documentation/gitformat-pack.txt: remove multi-cruft packs alternative
builtin/pack-objects.c: support `--max-pack-size` with `--cruft`
builtin/pack-objects.c: remove unnecessary strbuf_reset()
When formatted as man-page, the section title is rendered
"GENERATING PATCH TEXT WITH -P" whereas reference still reads
"Generating patch text with -p", that is inconsistent and makes
searching harder than it needs to be.
Fix this by getting rid of custom reference text.
Also, documentation for every command that describes `-p` option by
including the "diff-options.txt" file does include the
"diff-generate-patch.txt" file as well (as it should), so the internal
link is in fact useful for any of them.
Fix this by getting rid of conditionals around the reference.
Fixes: ebdc46c242 (docs: link generating patch sections)
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The section is inspired by git-commit.txt.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learns a way to feed cover letter description,
that (1) can be used on detached HEAD where there is no branch
description available, and (2) also can override the branch
description if there is one.
* ob/format-patch-description-file:
format-patch: add --description-file option
Most of our tree traversal algorithms use recursion to visit sub-trees.
For pathologically large trees, this can cause us to run out of stack
space and abort in an uncontrolled way. Let's put our own limit here so
that we can fail gracefully rather than segfaulting.
In similar cases where we recursed along the commit graph, we rewrote
the algorithms to avoid recursion and keep any stack data on the heap.
But the commit graph is meant to grow without bound, whereas it's not an
imposition to put a limit on the maximum size of tree we'll handle.
And this has a bonus side effect: coupled with a limit on individual
tree entry names, this limits the total size of a path we may encounter.
This gives us an extra protection against code handling long path names
which may suffer from integer overflows in the size (which could then be
exploited by malicious trees).
The default of 4096 is set to be much longer than anybody would care
about in the real world. Even with single-letter interior tree names
(like "a/b/c"), such a path is at least 8191 bytes. While most operating
systems will let you create such a path incrementally, trying to
reference the whole thing in a system call (as Git would do when
actually trying to access it) will result in ENAMETOOLONG. Coupled with
the recent fsck.largePathname warning, the maximum total pathname Git
will handle is (by default) 16MB.
This config option doesn't do anything yet; future patches will convert
various algorithms to respect the limit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, Git tries not to arbitrarily limit what it will store, and
there are currently no limits at all on the size of the path we find in
a tree. In theory you could have one that is gigabytes long.
But in practice this freedom is not really helping anybody, and is
potentially harmful:
1. Most operating systems have much lower limits for the size of a
single pathname component (e.g., on Linux you'll generally get
ENAMETOOLONG for anything over 255 bytes). And while you _can_ use
Git in a way that never touches the filesystem (manipulating the
index and trees directly), it's still probably not a good idea to
have gigantic tree names. Many operations load and traverse them,
so any clever Git-as-a-database scheme is likely to perform poorly
in that case.
2. We still have a lot of code which assumes strings are reasonably
sized, and I won't be at all surprised if you can trigger some
interesting integer overflows with gigantic pathnames. Stopping
malicious trees from entering the repository provides an extra line
of defense, protecting downstream code.
This patch implements an fsck check so that such trees can be rejected
by transfer.fsckObjects. I've picked a reasonably high maximum depth
here (4096) that hopefully should not bother anybody in practice. I've
also made it configurable, as an escape hatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than replacing the configured subject prefix (either through the
git config or command line) entirely with "RFC PATCH", this change
prepends RFC to whatever subject prefix was already in use.
This is useful, for example, when a user is working on a repository that
has a subject prefix considered to disambiguate patches:
git config format.subjectPrefix 'PATCH my-project'
Prior to this change, formatting patches with --rfc would lose the
'my-project' information.
The data flow for the subject-prefix was that rev.subject_prefix
were to be kept the authoritative version of the subject prefix even
while parsing command line options, and sprefix variable was used as
a temporary area to futz with it. Now, the parsing code has been
refactored to build the subject prefix into the sprefix variable and
assigns its value at the end to rev.subject_prefix, which makes the
flow easier to grasp.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This section was added in 3d89a8c118 (Documentation/technical: add
cruft-packs.txt, 2022-05-20) to highlight a potential pitfall when
deploying cruft packs in an environment where multiple versions of Git
are GC-ing the same repository.
Now that it has been more than a year since 3d89a8c118 was written,
let's drop this section as it is no longer relevant.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This text, originally from 3d89a8c118 (Documentation/technical: add
cruft-packs.txt, 2022-05-20) lists multiple cruft packs as a potential
alternative to the design of cruft packs.
We have always supported multiple cruft packs (i.e. we use the most
recent mtime for a given object among all cruft packs which contain it,
etc.), but haven't encouraged its use.
We still aren't encouraging users to go out and generate multiple cruft
packs, but let's take a step in that direction by dropping language that
suggests we aren't capable of working with multiple cruft packs.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects learned the `--cruft` option back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20), we
explicitly forbade `--cruft` with `--max-pack-size`.
At the time, there was no specific rationale given in the patch for not
supporting the `--max-pack-size` option with `--cruft`. (As best I can
remember, it's because we were trying to push users towards only ever
having a single cruft pack, but I cannot be sure).
However, `--max-pack-size` is flexible enough that it already works with
`--cruft` and can shard unreachable objects across multiple cruft packs,
creating separate ".mtimes" files as appropriate. In fact, the
`--max-pack-size` option worked with `--cruft` as far back as
b757353676!
This is because we overwrite the `written_list`, and pass down the
appropriate length, i.e. the number of objects written in each pack
shard.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two topics did not see much interest and reviews while they
were on 'next'; let's "inflict" them to the general public and see
if anybody screams, which is much less nicer way than to merge
only topics that are well reviewed down in an orderly manner, but
that is the only thing we can do to these topics without any
development community help.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have strong aversions to Scalar's opinion that the repository
should be in a 'src' directory, even though this creates a clean slate
for placing build artifacts in adjacent directories.
The new --no-src option allows users to opt out of the default behavior.
While adding options, make sure the usage output by 'scalar clone -h'
reports the same as the SYNOPSIS line in Documentation/scalar.txt.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd -h" learned to signal which options can be negated by
listing such options like "--[no-]opt".
* rs/parse-options-negation-help:
parse-options: simplify usage_padding()
parse-options: no --[no-]no-...
parse-options: factor out usage_indent() and usage_padding()
parse-options: show negatability of options in short help
t1502: test option negation
t1502: move optionspec help output to a file
t1502, docs: disallow --no-help
subtree: disallow --no-{help,quiet,debug,branch,message}
Overly long label names used in the sequencer machinery are now
chopped to fit under filesystem limitation.
* mp/rebase-label-length-limit:
rebase: allow overriding the maximal length of the generated labels
sequencer: truncate labels to accommodate loose refs
This patch makes it possible to directly feed a branch description to
derive the cover letter from. The use case is formatting dynamically
created temporary commits which are not referenced anywhere.
The most obvious alternative would be creating a temporary branch and
setting a description on it, but that doesn't seem particularly elegant.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add pointer and tag options to %(decorate) format, to allow to override
the " -> " string used to show where HEAD points and the "tag: " string
used to mark tags.
Document in pretty-formats.txt and test in t4205-log-pretty-formats.sh.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add %(decorate[:<options>]) format that lists ref names similarly to the
%d format, but which allows the otherwise fixed prefix, suffix and
separator strings to be customized. Omitted options default to the
strings used in %d.
Rename expand_separator() function used to expand %x literal formatting
codes to expand_string_arg(), as it is now used on strings other than
separators.
Examples:
- %(decorate) is equivalent to %d.
- %(decorate:prefix=,suffix=) is equivalent to %D.
- %(decorate:prefix=[,suffix=],separator=%x3B) produces a list enclosed
in square brackets and separated by semicolons.
Test the format in t4205-log-pretty-formats.sh and document it in
pretty-formats.txt.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enclose the 'options' placeholders in the documentation of the
%(describe) and %(trailers) format specifiers in angle brackets to
clarify that they are placeholders rather than keywords.
Also remove the indentation from their descriptions, instead of
increasing it to account for the extra two angle brackets in the
headings. The indentation isn't required by asciidoc, it doesn't reflect
how the output text is formatted, and it's inconsistent with the
following bullet points that are at the same level in the output.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for a %(trailer) option already uses this term without
having a definition anywhere in the document, and we are about to add
another one in %(decorate) that uses it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typo/grammofix to documentation added during this cycle.
* tl/notes-separator:
notes doc: tidy up `--no-stripspace` paragraph
notes doc: split up run-on sentences
With `--stdin`, we read *from* standard input, not *for*.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit 00bf685975 (show-ref doc: update for internal consistency,
2023-05-19) switched from double quotes to backticks around our {caret}
macro, we started rendering "{caret}" literally. Fix this by replacing
by a "^" character.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Where we document the `--no-stripspace` option, remove a superfluous
"For" to fix the grammar. Mark option names and command names using
`backticks` to set them in monospace.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit c4e2aa7d45 (notes.c: introduce "--[no-]stripspace" option,
2023-05-27) mentioned the new `--no-stripspace` in the documentation for
`-m` and `-F`, it created run-on sentences. It also used slightly
different language in the two sections for no apparent reason. Split the
sentences in two to improve readability, and while touching the two
sites, make them more similar.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this change, users can override the compiled-in default for the
maximal length of the label names generated by `git rebase
--rebase-merges`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Mark Ruvald Pedersen <mped@demant.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on a blog post and using grammarly it suggested this
change.
Signed-off-by: Wesley Schwengle <wesleys@opperschaap.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bisect visualize" stopped running "gitk" on Git for Windows
when the command was reimplemented in C around Git 2.34 timeframe.
This has been corrected.
* ma/locate-in-path-for-windows:
docs: update when `git bisect visualize` uses `gitk`
compat/mingw: implement a native locate_in_PATH()
run-command: conditionally define locate_in_PATH()
Tone down the warning on SHA-256 repositories being an experimental
curiosity. We do not have support for them to interoperate with
traditional SHA-1 repositories, but at this point, we do not plan
to make breaking changes to SHA-256 repositories and there is no
longer need for such a strongly phrased warning.
* am/doc-sha256:
doc: sha256 is no longer experimental
Add a "[no-]" prefix to options without the flag PARSE_OPT_NONEG to
document the fact that you can negate them.
This looks a bit strange for options that already start with "no-", e.g.
for the option --no-name of git show-branch:
--[no-]no-name suppress naming strings
You can actually use --no-no-name as an alias of --name, so the short
help is not wrong. If we strip off any of the "no-"s, we lose either
the ability to see if the remaining one belongs to the documented
variant or to see if it can be negated.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse --parseopt" handles the built-in options -h and --help,
but not --no-help. Make test definitions and documentation examples
more realistic by disabling negation.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify how to pick a starting point for a new topic in the
SubmittingPatches document.
* la/doc-choose-starting-point-fixup:
SubmittingPatches: use of older maintenance tracks is an exception
SubmittingPatches: explain why 'next' and above are inappropriate base
SubmittingPatches: choice of base for fixing an older maintenance track
Rewrite the description of giving a custom command to the
submodule.<name>.update configuration variable.
* pv/doc-submodule-update-settings:
doc: highlight that .gitmodules does not support !command
Clarify how to choose the starting point for a new topic in
developer guidance document.
* la/doc-choose-starting-point:
SubmittingPatches: simplify guidance for choosing a starting point
SubmittingPatches: emphasize need to communicate non-default starting points
SubmittingPatches: de-emphasize branches as starting points
SubmittingPatches: discuss subsystems separately from git.git
SubmittingPatches: reword awkward phrasing
This check has involved more environment variables than just `DISPLAY` since
508e84a790 (bisect view: check for MinGW32 and MacOSX in addition to X11,
2008-02-14), so let's update the documentation accordingly.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a typo introduced in aa9166bcc0 (The ninth batch, 2023-07-08).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list --format=<format>" and friends are taught
a new "%(describe)" placeholder.
* ks/ref-filter-describe:
ref-filter: add new "describe" atom
ref-filter: add multiple-option parsing functions
Recreating unmerged index entries using resolve-undo data,
recreating conflicted working tree files using unmerged index
entries, and writing data out of unmerged index entries, make
sense only when we are checking paths out of the index and not when
we are checking paths out of a tree-ish.
Add an extra check to make sure "--merge" and "--ours/--theirs"
options are rejected when checking out from a tree-ish, update the
document (especially the SYNOPSIS section) to highlight that they
are incompatible, and add a few tests to make sure the combination
fails.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove scary wording that basically stops people using sha256
repositories not because of interoperability issues with sha1
repositories, but from fear that their work will suddenly become
incompatible in some future version of git.
We should be clear that currently sha256 repositories will not work with
sha1 repositories but stop the scary words.
Signed-off-by: Adam Majer <adamm@zombino.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finding mistakes in and improving your own patches is a good idea,
but doing so too quickly is being inconsiderate to reviewers who
have just seen the initial iteration and taking their time to review
it. Encourage new developers to perform such a self review before
they send out their patches, not after. After sending a patch that
they immediately found mistakes in, they are welcome to comment on
them, mentioning what and how they plan to improve them in an
updated version, before sending out their updates.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we could technically fix each and every bug on top of the
commit that introduced it, it is not necessarily practical. For
trivial and low-value bugfixes, it often is simpler and sufficient
to just fix it in the current maintenance track, leaving the bug
unfixed in the older maintenance tracks.
Demote the "use older maintenance track to fix old bugs" as a side
note, and explain that the choice is used only in exceptional cases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'next' branch is primarily meant to be a testing ground to make
sure that topics that are reasonably well done work well together.
Building a new work on it would mean everything that was already in
'next' must have graduated to 'master' before the new work can also
be merged to 'master', and that is why we do not encourage basing
new work on 'next'.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working on an high-value bugfix that must be given to ancient
maintenance tracks, a starting point that is older than `maint` may
have to be chosen.
Helped-by: Linus Arver <linusa@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bugfix for fc01a5d2 (submodule update documentation: don't repeat
ourselves, 2016-12-27).
The `custom command` and `none` options are described as sharing the
same limitations, but one is allowed in .gitmodules and the other is
not.
Rewrite the description for custom commands to be more precise,
and make it easier for readers to notice that custom commands cannot
be used in the .gitmodules file.
Signed-off-by: Petar Vutov <pvutov@imap.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Duplicate the logic of %(describe) and friends from pretty to
ref-filter. In the future, this change helps in unifying both the
formats as ref-filter will be able to do everything that pretty is doing
and we can have a single interface.
The new atom "describe" and its friends are equivalent to the existing
pretty formats with the same name.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
