Extend the signing of objects with SSH keys and learn to pay
attention to the key validity time range when verifying.
* fs/ssh-signing-key-lifetime:
ssh signing: verify ssh-keygen in test prereq
ssh signing: make fmt-merge-msg consider key lifetime
ssh signing: make verify-tag consider key lifetime
ssh signing: make git log verify key lifetime
ssh signing: make verify-commit consider key lifetime
ssh signing: add key lifetime test prereqs
ssh signing: use sigc struct to pass payload
t/fmt-merge-msg: make gpgssh tests more specific
t/fmt-merge-msg: do not redirect stderr
When "git log" implicitly enabled the "decoration" processing
without being explicitly asked with "--decorate" option, it failed
to read and honor the settings given by the "--decorate-refs"
option.
* jk/log-decorate-opts-with-implicit-decorate:
log: load decorations with --simplify-by-decoration
log: handle --decorate-refs with userformat "%d"
"git rebase -x" by mistake started exporting the GIT_DIR and
GIT_WORK_TREE environment variables when the command was rewritten
in C, which has been corrected.
* en/rebase-x-wo-git-dir-env:
sequencer: do not export GIT_DIR and GIT_WORK_TREE for 'exec'
Weather balloon to find compilers that do not grok variable
declaration in the for() loop.
* jc/c99-var-decl-in-for-loop:
revision: use C99 declaration of variable in for() loop
In po/README.md, we point core developers to gettext's "Preparing
Strings" documentation for advice on marking strings for translation.
However, this doc doesn't really discuss the issues around plural form
translation, which can make it seem that nothing special needs to be
done in this case.
Add a specific callout here about marking plural-form strings so that
the advice later on in the README is not overlooked.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision traversal machinery typically processes and returns all
children before any parent. fast-export needs to operate in the
reverse fashion, handling parents before any of their children in
order to build up the history starting from the root commit(s). This
would be a clear case where we could just use the revision traversal
machinery's "reverse" option to achieve this desired affect.
However, this wasn't what the code did. It added its own array for
queuing. The obvious hand-rolled solution would be to just push all
the commits into the array and then traverse afterwards, but it didn't
quite do that either. It instead attempted to process anything it
could as soon as it could, and once it could, check whether it could
process anything that had been queued. As far as I can tell, this was
an effort to save a little memory in the case of multiple root commits
since it could process some commits before queueing all of them. This
involved some helper functions named has_unshown_parent() and
handle_tail(). For typical invocations of fast-export, this
alternative essentially amounted to a hand-rolled method of reversing
the commits -- it was a bunch of work to duplicate the revision
traversal machinery's "reverse" option.
This hand-rolled reversing mechanism is actually somewhat difficult to
reason about. It takes some time to figure out how it ensures in
normal cases that it will actually process all traversed commits
(rather than just dropping some and not printing anything for them).
And it turns out there are some cases where the code does drop commits
without handling them, and not even printing an error or warning for
the user. Due to the has_unshown_parent() checks, some commits could
be left in the array at the end of the "while...get_revision()" loop
which would be unprocessed. This could be triggered for example with
git fast-export main -- --first-parent
or non-sensical traversal rules such as
git fast-export main -- --grep=Merge --invert-grep
While most traversals that don't include all parents should likely
trigger errors in fast-export (or at least require being used in
combination with --reference-excluded-parents), the --first-parent
traversal is at least reasonable and it'd be nice if it didn't just drop
commits. It'd also be nice for future readers of the code to have a
simpler "reverse traversal" mechanism. Use the "reverse" option of the
revision traversal machinery to achieve both.
Even for the non-sensical traversal flags like the --grep one above,
this would be an improvement. For example, in that case, the code
previously would have silently truncated history to only those commits
that do not have an ancestor containing "Merge" in their commit message.
After this code change, that case would include all commits without
"Merge" in their commit message -- but any commit that previously had a
"Merge"-mentioning parent would lose that parent
(likely resulting in many new root commits). While the new behavior is
still odd, it is at least understandable given that
--reference-excluded-parents is not the default.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: William Sprent <williams@unity3d.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although we only documented that branch.*.autosetupmerge would accept
"always" as a value, the actual implementation would accept any
combination of upper- or lower-case. Fix this to be consistent with
documentation and with other values of this config variable.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new static variant of install_branch_config() that accepts
multiple remote branch names for tracking. This will be used in an
upcoming commit that enables inheriting the tracking configuration from
a parent branch.
Currently, all callers of install_branch_config() pass only a single
remote. Make install_branch_config() a small wrapper around
install_branch_config_multiple_remotes() so that existing callers do not
need to be changed.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a series of patches for a topic-B depends on having topic-A,
the workflow to prepare the topic-B branch would look like this:
$ git checkout -b topic-B main
$ git merge --no-ff --no-edit topic-A
$ git am <mbox-for-topic-B
When topic-A gets updated, recreating the first merge and rebasing
the rest of the topic-B, all on detached HEAD, is a useful
technique. After updating topic-A with its new round of patches:
$ git checkout topic-B
$ prev=$(git rev-parse 'HEAD^{/^Merge branch .topic-A. into}')
$ git checkout --detach $prev^1
$ git merge --no-ff --no-edit topic-A
$ git rebase --onto HEAD $prev @{-1}^0
$ git checkout -B @{-1}
This will
(0) check out the current topic-B.
(1) find the previous merge of topic-A into topic-B.
(2) detach the HEAD to the parent of the previous merge.
(3) merge the updated topic-A to it.
(4) reapply the patches to rebuild the rest of topic-B.
(5) update topic-B with the result.
without contaminating the reflog of topic-B too much. topic-B@{1}
is the "logically previous" state before topic-A got updated, for
example. At (4), comparison (e.g. range-diff) between HEAD and
@{-1} is a meaningful way to sanity check the result, and the same
can be done at (5) by comparing topic-B and topic-B@{1}.
But there is one glitch. The merge into the detached HEAD done in
the step (3) above gives us "Merge branch 'topic-A' into HEAD", and
does not say "into topic-B".
Teach the "--into-name=<branch>" option to "git merge" and its
underlying "git fmt-merge-message", to pretend as if we were merging
into <branch>, no matter what branch we are actually merging into,
when they prepare the merge message. The pretend name honors the
usual "into <target>" suppression mechanism, which can be seen in
the tests added here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When importing files from Perforce, git-p4 periodically logs the
progress of file transfers as a percentage. However, the value is
printed as a float with an excessive number of decimal places.
For example a typical update might contain the following message:
Importing revision 12345 (26.199617677553135%)
This patch simply rounds the value down to the nearest integer
percentage value, greatly improving readability.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-p4 script reports file sizes in various log messages.
Previously, in each case the script would print them as the number of
bytes divided by 1048576 i.e. the size in mebibytes, rounded down to an
integer. This resulted in small files being described as having a size
of "0 MB".
This patch replaces the existing behaviour with a new helper function:
format_size_human_readable, which takes a number of bytes (or any other
quantity), and computes the appropriate prefix to use: none, Ki, Mi, Gi,
Ti, Pi, Ei, Zi, Yi.
For example, a size of 123456 will now be printed as "120.6 KiB" greatly
improving the readability of the log output.
Large valued prefixes such as pebi, exbi, zebi and yobi are included for
completeness, though they not expected to appear in any real-world
Perforce repository!
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patterns that contain no wildcards and don't have to be case-folded are
literal. Give this condition a name to increase the readability of the
boolean expression for enabling the option PCRE2_UTF.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
compile_pcre2_pattern() currently uses the option PCRE2_UTF only for
patterns with non-ASCII characters. Patterns with ASCII wildcards can
match non-ASCII strings, though. Without that option PCRE2 mishandles
UTF-8 input, though -- it matches parts of multi-byte characters. Fix
that by using PCRE2_UTF even for ASCII-only patterns.
This is a remake of the reverted ae39ba431a (grep/pcre2: fix an edge
case concerning ascii patterns and UTF-8 data, 2021-10-15). The change
to the condition and the test are simplified and more targeted.
Original-patch-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Release the strbuf containing the interpolated path after copying it to
a stack buffer and before erroring out if it's too long.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain invocations of "git apply --3way" will attempt threeway and
fail due to missing objects, even though git is able to fall back on
apply_fragments and apply the patch successfully with a return value
of 0. To fix, return early from try_threeway() in the following
cases:
- When the patch is a rename and no lines have changed. In this
case, "git diff" doesn't record the blob info, so 3way is neither
possible nor necessary.
- When the patch is an addition and there is no add/add conflict,
i.e. direct_to_threeway is false. In this case, threeway will
fail since the preimage is not in cache, but isn't necessary
anyway since there is no conflict.
This fixes a few unecessary error messages when applying these kinds
of patches with --3way.
It also fixes a reported issue where applying a concatenation of
several git produced patches will fail when those patches involve a
deletion followed by creation of the same file. Add a test for this
case too. (test provided by <i@zenithal.me>)
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While testing some ideas in 'git repack', I ran it with '--quiet' and
discovered that some progress output was still shown. Specifically, the
output for writing the multi-pack-index showed the progress.
The 'show_progress' variable in cmd_repack() is initialized with
isatty(2) and is not modified at all by the '--quiet' flag. The
'--quiet' flag modifies the po_args.quiet option which is translated
into a '--quiet' flag for the 'git pack-objects' child process. However,
'show_progress' is used to directly send progress information to the
multi-pack-index writing logic which does not use a child process.
The fix here is to modify 'show_progress' to be false if po_opts.quiet
is true, and isatty(2) otherwise. This new expectation simplifies a
later condition that checks both.
Update the documentation to make it clear that '-q' will disable all
progress in addition to ensuring the 'git pack-objects' child process
will receive the flag.
Use 'test_terminal' to check that this works to get around the isatty(2)
check.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, we needed a single packfile in order to have reachability
bitmaps. This introduced logic that when 'git repack' had a '-b' option
that we should stop sending the '--honor-pack-keep' option to the 'git
pack-objects' child process, ensuring that we create a packfile
containing all reachable objects.
In the world of multi-pack-index bitmaps, we no longer need to repack
all objects into a single pack to have valid bitmaps. Thus, we should
continue sending the '--honor-pack-keep' flag to 'git pack-objects'.
The fix is very simple: only disable the flag when writing bitmaps but
also _not_ writing the multi-pack-index.
This opens the door to new repacking strategies that might want to keep
some historical set of objects in a stable pack-file while only
repacking more recent objects.
To test, create a new 'test_subcommand_inexact' helper that is more
flexible than 'test_subcommand'. This allows us to look for the
--honor-pack-keep flag without over-indexing on the exact set of
arguments.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Actually use extended regexes as indicated in the comment.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing colon to ensure correct rendering of definition list
item. Without the proper number of colons, it renders as just another
top-level paragraph rather than a list item.
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --invert-grep is documented to filter out commits whose
messages match the --grep filters. However, it also affects the
header matches (--author, --committer), which is not intended.
Move the handling of that option to grep.c, as only the code there can
distinguish between matches in the header from those in the message
body. If --invert-grep is given then enable extended expressions (not
the regex type, we just need git grep's --not to work), negate the body
patterns and check if any of them match by piggy-backing on the
collect_hits mechanism of grep_source_1().
Collecting the matches in struct grep_opt is a bit iffy, but with
"last_shown" we have a precedent for writing state information to that
struct.
Reported-by: Dotan Cohen <dotancohen@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comand uses a single instance of rev_info on stack, makes a
single revision traversal and exit. Mark the resources held by the
rev_info structure with UNLEAK().
We do not do this at lower level in revision.c or cmd_log_walk(), as
a new caller of the revision traversal API can make unbounded number
of rev_info during a single run, and UNLEAK() would not a be
suitable mechanism to deal with such a caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we marked that this patch-id test is leak-sanitizer clean,
but if we read the test script carefully, it is merely because we
have too many invocations of commands in the "git log" family on the
upstream side of the pipe, hiding breakages from them.
Split the pipeline so that breakages from these commands can be
caught (not limited to aborts due to leak-sanitizer) and unmark
the script as not passing the test with leak-sanitizer in effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RCS keywords are strings that are replaced with information from
Perforce. Examples include $Date$, $Author$, $File$, $Change$ etc.
Perforce resolves these by expanding them with their expanded values
when files are synced, but Git's data model requires these expanded
values to be converted back into their unexpanded form.
Previously, git-p4.py would implement this behaviour through the use of
regular expressions. However, the regular expression substitution was
applied using decoded strings i.e. the content of incoming commit diffs
was first decoded from bytes into UTF-8, processed with regular
expressions, then converted back to bytes.
Not only is this behaviour inefficient, but it is also a cause of a
common issue caused by text files containing invalid UTF-8 data. For
files created in Windows, CP1252 Smart Quote Characters (0x93 and 0x94)
are seen fairly frequently. These codes are invalid in UTF-8, so if the
script encountered any file containing them, on Python 2 the symbols
will be corrupted, and on Python 3 the script will fail with an
exception.
This patch replaces this decoding/encoding with bytes object regular
expressions, so that the substitution is performed directly upon the
source data with no conversions.
A test for smart quote handling has been added to the
t9810-git-p4-rcs.sh test suite.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patchRCSKeywords method creates a temporary file in which to store
the patched output data. Previously this file was opened in "w+" mode
(write and read), but the code never reads the contents of the file
while open, so it only needs to be opened in "w" mode (write-only).
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the read_lines function always decoded the result lines. In
order to improve support for non-decoded binary processing of data in
git-p4.py, this patch adds a raw option to the function that allows
decoding to be disabled.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously git-p4.py would compile one of two regular expressions for
ever RCS keyword-enabled file. This patch improves simplifies the code
by pre-compiling the two regular expressions when the script first
loads.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python with statements are used to wrap the execution of a block of code
so that an object can be safely released when execution leaves the
scope.
They are desirable for improving code tidyness, and to ensure that
objects are properly destroyed even when exceptions are thrown.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the usage message emitted by "git stash --invalid-option" to
emit usage information for "git stash" in general, and not just for
the "push" command. I.e. before:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--] [<pathspec>...]]
[...]
After:
$ git stash --invalid-option
error: unknown option `invalid-option'
usage: git stash list [<options>]
or: git stash show [<options>] [<stash>]
or: git stash drop [-q|--quiet] [<stash>]
or: git stash ( pop | apply ) [--index] [-q|--quiet] [<stash>]
or: git stash branch <branchname> [<stash>]
or: git stash clear
or: git stash [push [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[--pathspec-from-file=<file> [--pathspec-file-nul]]
[--] [<pathspec>...]]
or: git stash save [-p|--patch] [-S|--staged] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [<message>]
[...]
That we emitted the usage for just "push" in the case of the
subcommand not being explicitly specified was an unintentional
side-effect of how it was implemented. When it was converted to C in
d553f538b8 (stash: convert push to builtin, 2019-02-25) the pattern
of having per-subcommand usage information was rightly continued. The
"git-stash.sh" shellscript did not have that, and always printed the
equivalent of "git_stash_usage".
But in doing so the case of push being implicit and explicit was
conflated. A variable was added to track this in 8c3713cede (stash:
eliminate crude option parsing, 2020-02-17), but it did not update the
usage output accordingly.
This still leaves e.g. "git stash push -h" emitting the
"git_stash_usage" output, instead of "git_stash_push_usage". That
should be fixed, but is a much deeper misbehavior in parse_options()
not being aware of subcommands at all. I.e. in how
PARSE_OPT_KEEP_UNKNOWN and PARSE_OPT_NO_INTERNAL_HELP combine in
commands such as "git stash".
Perhaps PARSE_OPT_KEEP_UNKNOWN should imply
PARSE_OPT_NO_INTERNAL_HELP, or better yet parse_options() should be
extended to fully handle these subcommand cases that we handle
manually in "git stash", "git commit-graph", "git multi-pack-index"
etc. All of those musings would be a much bigger change than this
isolated fix though, so let's leave that for some other time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three callsites of git_prompt() helper function that ask a
"yes/no" question to the end user, but one of them in help.c that
asks if the suggested auto-correction is OK, which is given when the
user makes a possible typo in a Git subcommand name, is formatted
differently from the others.
Update the format string to make the prompt string look more
consistent.
Signed-off-by: Kashav Madan <kshvmdn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option helps to record specific empty patches in the middle
of an am session, which does create empty commits only when:
1. the index has not changed
2. lacking a branch
When the index has changed, "--allow-empty" will create a non-empty
commit like passing "--continue" or "--resolved".
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since that the command 'git-format-patch' can include patches of
commits that emit no changes, the 'git-am' command should also
support an option, named as '--empty', to specify how to handle
those empty patches. In this commit, we have implemented three
valid options ('stop', 'drop' and 'keep').
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit has described how to use '--always' option in the command
'git-format-patch' to include patches for commits that emit no changes.
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion for gpg.ssh.allowedSignersFile shows an example string
that contains "user1@example.com,user2@example.com". Asciidoc thinks
these are real email addresses and generates "mailto" footnotes for
them. This makes the rendered content more confusing, as it has extra
"[1]" markers:
The file consists of one or more lines of principals followed by an
ssh public key. e.g.: user1@example.com[1],user2@example.com[2]
ssh-rsa AAAAX1... See ssh-keygen(1) "ALLOWED SIGNERS" for details.
and also generates pointless notes at the end of the page:
NOTES
1. user1@example.com
mailto:user1@example.com
2. user2@example.com
mailto:user2@example.com
We can fix this by putting the example into a backtick literal block.
That inhibits the mailto generation, and as a bonus typesets the example
text in a way that sets it off from the regular prose (a tt font for
html, or bold in the roff manpage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When serving a fetch, git upload-pack copies data from a git
pack-objects stdout pipe to its stdout. This commit increases the size
of the buffer used for that copying from 8192 to 65515, the maximum
sideband-64k packet size.
Previously, this buffer was allocated on the stack. Because the new
buffer size is nearly 64KB, we switch this to a heap allocation.
On GitLab.com we use GitLab's pack-objects cache which does writes of
65515 bytes. Because of the default 8KB buffer size, propagating these
cache writes requires 8 pipe reads and 8 pipe writes from
git-upload-pack, and 8 pipe reads from Gitaly (our Git RPC service).
If we increase the size of the buffer to the maximum Git packet size,
we need only 1 pipe read and 1 pipe write in git-upload-pack, and 1
pipe read in Gitaly to transfer the same amount of data. In benchmarks
with a pure fetch and 100% cache hit rate workload we are seeing CPU
utilization reductions of over 30%.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commits marked `sparse-checkout init` as deprecated; we
can just use `set` instead here and pass it no paths.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the previous commit, using separate `init` and `set` steps
with sparse-checkout result in a number of issues. The previous commits
made `set` able to handle the work of both commands, and enabled reapply
to tweak the {cone,sparse-index} settings. Update the documentation to
reflect this, and mark `init` as deprecated.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Folks may want to switch to or from cone mode, or to or from a
sparse-index without changing their sparsity paths. Allow them to do so
using the reapply command.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previously suggested workflow:
git sparse-checkout init ...
git sparse-checkout set ...
Suffered from three problems:
1) It would delete nearly all files in the first step, then
restore them in the second. That was poor performance and
forced unnecessary rebuilds.
2) The two-step process resulted in two progress bars, which
was suboptimal from a UI point of view for wrappers that
invoked both of these commands but only exposed a single
command to their end users.
3) With cone mode, the first step would delete nearly all
ignored files everywhere, because everything was considered
to be outside of the specified sparsity paths. (The user was
not allowed to specify any sparsity paths in the `init` step.)
Avoid these problems by teaching `set` to understand the extra
parameters that `init` takes and performing any necessary initialization
if not already in a sparse checkout.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`init` has some code for handling updates to either cone mode or
the sparse-index setting. We would like to be able to reuse this
elsewhere, namely in `set` and `reapply`. Split this function out,
and make it slightly more general so it can handle being called from
the new callers.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We intentionally added --stdin as an option to `sparse-checkout set`,
but didn't intend for --no-stdin to be permitted as well.
Reported-by: Victoria Dye <vdye@github.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most sparse-checkout subcommands (list, add, reapply) only make sense
when already in a sparse state. Add a quick check that will error out
early if this is not the case.
Also document with a comment why we do not exit early in `disable` even
when core.sparseCheckout starts as false.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sparse_checkout_set() was reused by sparse_checkout_add() with the only
difference being a single parameter being passed to that function.
However, we would like sparse_checkout_set() to do the same work that
sparse_checkout_init() does if sparse checkouts are not already enabled.
To facilitate this transition, give each mode their own copy of the
function. This does not introduce any behavioral changes; that will
come in a subsequent patch.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_patterns_from_input() has relied on a global variable,
set_opts.use_stdin, which has been used by both the `set` and `add`
subcommands of sparse-checkout. Once we introduce an
add_opts.use_stdin, the hardcoding of set_opts.use_stdin will be
incorrect. Pass the value as function parameter instead to allow us to
make subsequent changes.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* ab/die-with-bug:
object.c: use BUG(...) no die("BUG: ...") in lookup_object_by_type()
pathspec: use BUG(...) not die("BUG:%s:%d....", <file>, <line>)
strbuf.h: use BUG(...) not die("BUG: ...")
pack-objects: use BUG(...) not die("BUG: ...")
The test helper for refs subsystem learned to write bogus and/or
nonexistent object name to refs to simulate error situations we
want to test Git in.
* hn/allow-bogus-oid-in-ref-tests:
t1430: create valid symrefs using test-helper
t1430: remove refs using test-tool
refs: introduce REF_SKIP_REFNAME_VERIFICATION flag
refs: introduce REF_SKIP_OID_VERIFICATION flag
refs: update comment.
test-ref-store: plug memory leak in cmd_delete_refs
test-ref-store: parse symbolic flag constants
test-ref-store: remove force-create argument for create-reflog
