Change the grep_{lock,unlock} functions to assert that num_threads is
true, instead of only locking & unlocking the pthread mutex lock when
it is.
These functions are never called when num_threads isn't true, this
logic has gone through multiple iterations since the initial
introduction of grep threading in commit 5b594f457a ("Threaded grep",
2010-01-25), but ever since then they'd only be called if num_threads
was true, so this check made the code confusing to read.
Replace the check with an assertion, so that it's clear to the reader
that this code path is never taken unless we're spawning threads.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a warning about missing thread support when grep.threads or
--threads is set to a non 0 (default) or 1 (no parallelism) value
under NO_PTHREADS=YesPlease.
This is for consistency with the index-pack & pack-objects commands,
which also take a --threads option & are configurable via
pack.threads, and have long warned about the same under
NO_PTHREADS=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a die(...) to a default case for the switch statement selecting
between grep pattern types under --recurse-submodules.
Normally this would be caught by -Wswitch, but the grep_pattern_type
type is converted to int by going through parse_options(). Changing
the argument type passed to compile_submodule_options() won't work,
the value will just get coerced. The -Wswitch-default warning will
warn about it, but that produces a lot of noise across the codebase,
this potential issue would be drowned in that noise.
Thus catching this at runtime is the least bad option. This won't ever
trigger in practice, but if a new pattern type were to be added this
catches an otherwise silent bug during development.
See commit 0281e487fd ("grep: optionally recurse into submodules",
2016-12-16) for the initial addition of this code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call clear_pathspec() to release resources immediately before the
cmd_grep() function returns.
* ab/grep-plug-pathspec-leak:
grep: plug a trivial memory leak
Change the cleanup phase for the grep command to free the pathspec
struct that's allocated earlier in the same block, and used just a few
lines earlier.
With "grep hi README.md" valgrind reports a loss of 239 bytes now,
down from 351.
The relevant --num-callers=40 --leak-check=full --show-leak-kinds=all
backtrace is:
[...] 187 (112 direct, 75 indirect) bytes in 1 blocks are definitely lost in loss record 70 of 110
[...] at 0x4C2BBAF: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
[...] by 0x60B339: do_xmalloc (wrapper.c:59)
[...] by 0x60B2F6: xmalloc (wrapper.c:86)
[...] by 0x576B37: parse_pathspec (pathspec.c:652)
[...] by 0x4519F0: cmd_grep (grep.c:1215)
[...] by 0x4062EF: run_builtin (git.c:371)
[...] by 0x40544D: handle_builtin (git.c:572)
[...] by 0x4060A2: run_argv (git.c:624)
[...] by 0x4051C6: cmd_main (git.c:701)
[...] by 0x4C5901: main (common-main.c:43)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few commands that recently learned the "--recurse-submodule"
option misbehaved when started from a subdirectory of the
superproject.
* bw/recurse-submodules-relative-fix:
ls-files: fix bug when recursing with relative pathspec
ls-files: fix typo in variable name
grep: fix bug when recursing with relative pathspec
setup: allow for prefix to be passed to git commands
grep: fix help text typo
"git checkout" is taught the "--recurse-submodules" option.
* sb/checkout-recurse-submodules:
builtin/read-tree: add --recurse-submodules switch
builtin/checkout: add --recurse-submodules switch
entry.c: create submodules when interesting
unpack-trees: check if we can perform the operation for submodules
unpack-trees: pass old oid to verify_clean_submodule
update submodules: add submodule_move_head
submodule.c: get_super_prefix_or_empty
update submodules: move up prepare_submodule_repo_env
submodules: introduce check to see whether to touch a submodule
update submodules: add a config option to determine if submodules are updated
update submodules: add submodule config parsing
make is_submodule_populated gently
lib-submodule-update.sh: define tests for recursing into submodules
lib-submodule-update.sh: replace sha1 by hash
lib-submodule-update: teach test_submodule_content the -C <dir> flag
lib-submodule-update.sh: do not use ./. as submodule remote
lib-submodule-update.sh: reorder create_lib_submodule_repo
submodule--helper.c: remove duplicate code
connect_work_tree_and_git_dir: safely create leading directories
Commit 0281e487fd ("grep: optionally recurse into submodules")
added functions grep_submodule() and grep_submodule_launch() which
use "struct work_item" which is defined only when thread support
is available.
The original implementation of grep_submodule() used the "struct
work_item" in order to gain access to a strbuf to store its output which
was to be printed at a later point in time. This differs from how both
grep_file() and grep_sha1() handle their output. This patch eliminates
the reliance on the "struct work_item" and instead opts to use the
output function stored in the output field of the "struct grep_opt"
object directly, making it behave similarly to both grep_file() and
grep_sha1().
Reported-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --recurse-submodules flag with a relative pathspec which
includes "..", an error is produced inside the child process spawned for
a submodule. When creating the pathspec struct in the child, the ".."
is interpreted to mean "go up a directory" which causes an error stating
that the path ".." is outside of the repository.
While it is true that ".." is outside the scope of the submodule, it is
confusing to a user who originally invoked the command where ".." was
indeed still inside the scope of the superproject. Since the child
process launched for the submodule has some context that it is operating
underneath a superproject, this error could be avoided.
This patch fixes the bug by passing the 'prefix' to the child process.
Now each child process that works on a submodule has two points of
reference to the superproject: (1) the 'super_prefix' which is the path
from the root of the superproject down to root of the submodule and (2)
the 'prefix' which is the path from the root of the superproject down to
the directory where the user invoked the git command.
With these two pieces of information a child process can correctly
interpret the pathspecs provided by the user as well as being able to
properly format its output relative to the directory the user invoked
the original command from.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need the gentle version in a later patch. As we have just one caller,
migrate the caller.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several functions to use struct object_id, and rename them so
that they no longer refer to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-grep has always disallowed grepping in a tree (as
opposed to the working directory) with both --untracked
and --no-index. But we traditionally did so by first
collecting the revs, and then complaining when any were
provided.
The --no-index option recently learned to detect revs
much earlier. This has two user-visible effects:
- we don't bother to resolve revision names at all. So
when there's a rev/path ambiguity, we always choose to
treat it as a path.
- likewise, when you do specify a revision without "--",
the error you get is "no such path" and not "--untracked
cannot be used with revs".
The rationale for doing this with --no-index is that it is
meant to be used outside a repository, and so parsing revs
at all does not make sense.
This patch gives --untracked the same treatment. While it
_is_ meant to be used in a repository, it is explicitly
about grepping the non-repository contents. Telling the user
"we found a rev, but you are not allowed to use revs" is
not really helpful compared to "we treated your argument as
a path, and could not find it".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are using --no-index, then our arguments cannot be
revs in the first place. Not only is it pointless to
diagnose them, but if we are not in a repository, we should
not be trying to resolve any names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We disallow the use of revisions with --no-index, but we
don't actually check and complain until well after we've
parsed the revisions.
This is the cause of a few problems:
1. We shouldn't be calling get_sha1() at all when we aren't
in a repository, as it might access the ref or object
databases. For now, this should generally just return
failure, but eventually it will become a BUG().
2. When there's a "--" disambiguator and you're outside a
repository, we'll complain early with "unable to resolve
revision". But we can give a much more specific error.
3. When there isn't a "--" disambiguator, we still do the
normal rev/path checks. This is silly, as we know we
cannot have any revs with --no-index. Everything we see
must be a path.
Outside of a repository this doesn't matter (since we
know it won't resolve), but inside one, we may complain
unnecessarily if a filename happens to also match a
refname.
This patch skips the get_sha1() call entirely in the
no-index case, and behaves as if it failed (with the
exception of giving a better error message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we see "git grep pattern rev -- file" then we apply the
usual rev/pathspec disambiguation rules: any "rev" before
the "--" must be a revision, and we do not need to apply the
verify_non_filename() check.
But there are two bugs here:
1. We keep a seen_dashdash flag to handle this case, but
we set it in the same left-to-right pass over the
arguments in which we parse "rev".
So when we see "rev", we do not yet know that there is
a "--", and we mistakenly complain if there is a
matching file.
We can fix this by making a preliminary pass over the
arguments to find the "--", and only then checking the rev
arguments.
2. If we can't resolve "rev" but there isn't a dashdash,
that's OK. We treat it like a path, and complain later
if it doesn't exist.
But if there _is_ a dashdash, then we know it must be a
rev, and should treat it as such, complaining if it
does not resolve. The current code instead ignores it
and tries to treat it like a path.
This patch fixes both bugs, and tries to comment the parsing
flow a bit better.
It adds tests that cover the two bugs, but also some related
situations (which already worked, but this confirms that our
fixes did not break anything).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We loop over the arguments, but every branch of the loop
hits either a "continue" or a "break". Surely we can make
this simpler.
The final conditional is:
if (arg is a rev) {
... handle rev ...
continue;
}
break;
We can rewrite this as:
if (arg is not a rev)
break;
... handle rev ...
That makes the flow a little bit simpler, and will make
things much easier to follow when we add more logic in
future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command of the form
git grep --no-index pattern -- path
in the absence of a Git repository, an error message will be printed:
fatal: BUG: setup_git_env called without repository
This is because "git grep" tries to interpret "--" as a rev. "git grep"
has always tried to first interpret "--" as a rev for at least a few
years, but this issue was upgraded from a pessimization to a bug in
commit 59332d1 ("Resurrect "git grep --no-index"", 2010-02-06), which
calls get_sha1 regardless of whether --no-index was specified. This bug
appeared to be benign until commit b1ef400 ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20) when Git was taught to die in this
situation. (This "git grep" bug appears to be one of the bugs that
commit b1ef400 is meant to flush out.)
Therefore, always interpret "--" as signaling the end of options,
instead of trying to interpret it as a rev first.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, we set up the threads for grep before parsing
the non-option arguments. In 53b8d931b (grep: disable
threading in non-worktree case, 2011-12-12), the thread code
got bumped lower in the function because it now needed to
know whether we got any revision arguments.
That put a big block of code in between the parsing of revs
and the parsing of pathspecs, both of which share some loop
variables. That makes it harder to read the code than the
original, where the shared loops were right next to each
other.
Let's bump the thread initialization until after all of the
parsing is done.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a submodule was renamed at any point since it's inception then if you
were to try and grep on a commit prior to the submodule being moved, you
wouldn't be able to find a working directory for the submodule since the
path in the past is different from the current path.
This patch teaches grep to find the .git directory for a submodule in
the parents .git/modules/ directory in the event the path to the
submodule in the commit that is being searched differs from the state of
the currently checked out commit. If found, the child process that is
spawned to grep the submodule will chdir into its gitdir instead of a
working directory.
In order to override the explicit setting of submodule child process's
gitdir environment variable (which was introduced in '10f5c526')
`GIT_DIR_ENVIORMENT` needs to be pushed onto child process's env_array.
This allows the searching of history from a submodule's gitdir, rather
than from a working directory.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach grep to recursively search in submodules when provided with a
<tree> object. This allows grep to search a submodule based on the state
of the submodule that is present in a commit of the super project.
When grep is provided with a <tree> object, the name of the object is
prefixed to all output. In order to provide uniformity of output
between the parent and child processes the option `--parent-basename`
has been added so that the child can preface all of it's output with the
name of the parent's object instead of the name of the commit SHA1 of
the submodule. This changes output from the command
`git grep -e. -l --recurse-submodules HEAD` from:
HEAD:file
<commit sha1 of submodule>:sub/file
to:
HEAD:file
HEAD:sub/file
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow grep to recognize submodules and recursively search for patterns in
each submodule. This is done by forking off a process to recursively
call grep on each submodule. The top level --super-prefix option is
used to pass a path to the submodule which can in turn be used to
prepend to output or in pathspec matching logic.
Recursion only occurs for submodules which have been initialized and
checked out by the parent project. If a submodule hasn't been
initialized and checked out it is simply skipped.
In order to support the existing multi-threading infrastructure in grep,
output from each child process is captured in a strbuf so that it can be
later printed to the console in an ordered fashion.
To limit the number of theads that are created, each child process has
half the number of threads as its parents (minimum of 1), otherwise we
potentailly have a fork-bomb.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git does not know what the contents in the index should be for a
path added with "git add -N" yet, so "git grep --cached" should not
show hits (or show lack of hits, with -L) in such a path, but that
logic does not apply to "git grep", i.e. searching in the working
tree files. But we did so by mistake, which has been corrected.
* nd/ita-cleanup:
grep: fix grepping for "intent to add" files
t7810-grep.sh: fix a whitespace inconsistency
t7810-grep.sh: fix duplicated test name
This reverts commit 4d5520053 (grep: make it clear i-t-a entries are
ignored, 2015-12-27) and adds an alternative fix to maintain the -L
--cached behavior.
4d5520053 caused 'git grep' to no longer find matches in new files in
the working tree where the corresponding index entry had the "intent to
add" bit set, despite the fact that these files are tracked.
The content in the index of a file for which the "intent to add" bit is
set is considered indeterminate and not empty. For most grep queries we
want these to behave the same, however for -L --cached (files without a
match) we don't want to respond positively for "intent to add" files as
their contents are indeterminate. This is in contrast to files with
empty contents in the index (no lines implies no matches for any grep
query expression) which should be reported in the output of a grep -L
--cached invocation.
Add tests to cover this case and a few related cases which previously
lacked coverage.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move from unsigned char[20] to struct object_id continues.
* bc/object-id:
match-trees: convert several leaf functions to use struct object_id
tree-walk: convert tree_entry_extract() to use struct object_id
struct name_entry: use struct object_id instead of unsigned char sha1[20]
match-trees: convert shift_tree() and shift_tree_by() to use object_id
test-match-trees: convert to use struct object_id
sha1-name: introduce a get_oid() function
If we are running "git grep --no-index" outside of a git
repository, we behave roughly like "grep -r", examining all
files in the current directory and its subdirectories.
However, because we use fill_directory() to do the
recursion, it will skip over any directories which look like
sub-repositories.
For a normal git operation (like "git grep" in a repository)
this makes sense; we do not want to cross the boundary out
of our current repository into a submodule. But for
"--no-index" without a repository, we should look at all
files, including embedded repositories.
There is one exception, though: we probably should _not_
descend into ".git" directories. Doing so is inefficient and
unlikely to turn up useful hits.
This patch drops our use of dir.c's gitlink-detection, but
we do still avoid ".git". That makes us more like tools such
as "ack" or "ag", which also know to avoid cruft in .git.
As a bonus, this also drops our usage of the ref code
when we are outside of a repository, making the transition
to pluggable ref backends cleaner.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
There are many manual argv allocations that predate the
argv_array API. Switching to that API brings a few
advantages:
1. We no longer have to manually compute the correct final
array size (so it's one less thing we can screw up).
2. In many cases we had to make a separate pass to count,
then allocate, then fill in the array. Now we can do it
in one pass, making the code shorter and easier to
follow.
3. argv_array handles memory ownership for us, making it
more obvious when things should be free()d and and when
not.
Most of these cases are pretty straightforward. In some, we
switch from "run_command_v" to "run_command" which lets us
directly use the argv_array embedded in "struct
child_process".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many commands that read files that are expected to contain text
that is generated (or can be edited) by the end user to control
their behaviour (e.g. "git grep -f <filename>") have been updated
to be more tolerant to lines that are terminated with CRLF (they
used to treat such a line to contain payload that ends with CR,
which is usually not what the users expect).
* jc/peace-with-crlf:
test-sha1-array: read command stream with strbuf_getline()
grep: read -f file with strbuf_getline()
send-pack: read list of refs with strbuf_getline()
column: read lines with strbuf_getline()
cat-file: read batch stream with strbuf_getline()
transport-helper: read helper response with strbuf_getline()
clone/sha1_file: read info/alternates with strbuf_getline()
remote.c: read $GIT_DIR/remotes/* with strbuf_getline()
ident.c: read /etc/mailname with strbuf_getline()
rev-parse: read parseopt spec with strbuf_getline()
revision: read --stdin with strbuf_getline()
hash-object: read --stdin-paths with strbuf_getline()
The preliminary clean-up for jc/peace-with-crlf topic.
* jc/strbuf-getline:
strbuf: give strbuf_getline() to the "most text friendly" variant
checkout-index: there are only two possible line terminations
update-index: there are only two possible line terminations
check-ignore: there are only two possible line terminations
check-attr: there are only two possible line terminations
mktree: there are only two possible line terminations
strbuf: introduce strbuf_getline_{lf,nul}()
strbuf: make strbuf_getline_crlf() global
strbuf: miniscule style fix
"git grep" by default does not fall back to its "--no-index"
behaviour outside a directory under Git's control (otherwise the
user may by mistake end up running a huge recursive search); with a
new configuration (set in $HOME/.gitconfig--by definition this
cannot be set in the config file per project), this safety can be
disabled.
* tg/grep-no-index-fallback:
builtin/grep: add grep.fallbackToNoIndex config
t7810: correct --no-index test
Paths that have been told the index about with "add -N" are not
quite yet in the index, but a few commands behaved as if they
already are in a harmful way.
* nd/ita-cleanup:
grep: make it clear i-t-a entries are ignored
add and use a convenience macro ce_intent_to_add()
blame: remove obsolete comment
List of patterns file could come from a DOS editor.
This is iffy; you may actually be trying to find a line with ^M in
it on a system whose line ending is LF. You can of course work it
around by having a line that has "^M^M^J", let the strbuf_getline()
eat the last "^M^J", leaving just the single "^M" as the pattern.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line)
how many threads to use when searching in the working tree files.
* vl/grep-configurable-threads:
grep: add --threads=<num> option and grep.threads configuration
grep: slight refactoring to the code that disables threading
grep: allow threading even on a single-core machine
Currently when git grep is used outside of a git repository without the
--no-index option git simply dies. For convenience, add a
grep.fallbackToNoIndex configuration variable. If set to true, git grep
behaves like git grep --no-index if it is run outside of a git
repository. It defaults to false, preserving the current behavior.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expression "!S_ISREG(ce)" covers i-t-a entries as well because
ce->ce_mode would be zero then. I could make a comment saying that, but
it's probably better just to comment with code, in case i-t-a entry
content changes in future.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line) how
many threads to use when searching in the working tree files.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When show-in-pager option is used, threading is unconditionally
disabled, but this happened much earlier than the code that
determines the use of threading based on the operand (i.e. we do not
thread search in the object database). Consolidate the code to
disable threading to just one place.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we disabled threading when online_cpus() said "1", but on a
filesystem with long latency (or in a cold cache situation), using
multiple threads to drive I/O in parallel would improve performance
even on a single-core machines.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More transition from "unsigned char[40]" to "struct object_id".
This needed a few merge fixups, but is mostly disentangled from other
topics.
* bc/object-id:
remote: convert functions to struct object_id
Remove get_object_hash.
Convert struct object to object_id
Add several uses of get_object_hash.
object: introduce get_object_hash macro.
ref_newer: convert to use struct object_id
push_refs_with_export: convert to struct object_id
get_remote_heads: convert to struct object_id
parse_fetch: convert to use struct object_id
add_sought_entry_mem: convert to struct object_id
Convert struct ref to use object_id.
sha1_file: introduce has_object_file helper.
The flag PARSE_OPT_NO_INTERNAL_HELP is set to allow overriding the
option -h, except when it's the only one given. This is the default
behavior now, so remove the flag and the hand-rolled --help-all
handling. The internal --help-all handler now actually shows hidden
options, i.e. --debug in this case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>