Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
Assorted changes around pseudoref handling.
* ps/pseudo-refs:
bisect: consistently write BISECT_EXPECTED_REV via the refdb
refs: complete list of special refs
refs: propagate errno when reading special refs fails
wt-status: read HEAD and ORIG_HEAD via the refdb
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bisect reset" has been taught to clean up state files and refs
even when BISECT_START file is gone.
* jk/bisect-reset-fix:
bisect: always clean on reset
We're inconsistently writing BISECT_EXPECTED_REV both via the filesystem
and via the refdb, which violates the newly established rules for how
special refs must be treated. This works alright in practice with the
reffiles reference backend, but will cause bugs once we gain additional
backends.
Fix this issue and consistently write BISECT_EXPECTED_REV via the refdb
so that it is no longer a special ref.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually "bisect reset" cleans up any refs/bisect/ refs, along with
meta-files like .git/BISECT_LOG. But it only does so after deciding that
a bisection is active, which it does by reading BISECT_START. This is
usually fine, but it's possible to get into a confusing state if the
BISECT_START file is gone, but other cruft is left (this might be due to
a bug, or a system crash, etc).
And since "bisect reset" refuses to do anything in this state, the user
has no easy way to clean up the leftover cruft. While another "bisect
start" would clear the state, in the interim it can be annoying, as
other tools (like our bash prompt code) think we are bisecting, and
for-each-ref output may be polluted with refs/bisect/ entries.
Further adding to the confusion is that running "bisect reset $some_ref"
skips the BISECT_START check. So it never realizes that there's no
bisection active and does the cleanup anyway!
So let's just make sure we always do the cleanup, whether we looked at
BISECT_START or not. If the user doesn't give us a commit to reset to,
we'll still say "We are not bisecting" and skip the call to "git
checkout".
Reported-by: Janik Haag <janik@aq0.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the `git bisect run` command syntax at the beginning
of the manpage is `git bisect run <cmd>...`, which isn't quite clear
about what `<cmd>` is or what the `...` mean; one could think that it is
the whole (quoted) command line with all arguments in a single string,
or that it supports multiple commands, or that it doesn't accept
commands with arguments at all.
Change to `git bisect run <cmd> [<arg>...]` to clarify the syntax,
in both the manpage and the `git bisect -h` command output.
Additionally, change `--term-{new,bad}` et al to `--term-(new|bad)`
for consistency with the synopsis syntax conventions.
Signed-off-by: Javier Mora <cousteaulecommandant@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"revision.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"pretty.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git bisect reset" to check out the original branch when the
branch is already checked out in a different worktree linked to the
same repository.
* rj/bisect-already-used-branch:
bisect: fix "reset" when branch is checked out elsewhere
Since 1d0fa89 (checkout: add --ignore-other-wortrees, 2015-01-03) we
have a safety valve in checkout/switch to prevent the same branch from
being checked out simultaneously in multiple worktrees.
If a branch is bisected in a worktree while also being checked out in
another worktree; when the bisection is finished, checking out the
branch back in the current worktree may fail.
Let's teach bisect to use the "--ignore-other-worktrees" flag.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, there was this idea that Git would not actually be a
single coherent program, but rather a set of low-level programs that
users cobble together via shell scripts, or develop high-level user
interfaces for Git, or both.
Cogito was such a high-level user interface, incidentally implemented
via shell scripts that cobble together Git calls.
It did turn out relatively quickly that Git would much rather provide a
useful high-level user interface itself.
As of April 19th, 2007, Cogito was therefore discontinued (see
https://lore.kernel.org/git/20070419124648.GL4489@pasky.or.cz/).
Nevertheless, for almost 15 years after that announcement, Git carried
special code in `git bisect` to accommodate Cogito.
Since it is beyond doubt that there are no more Cogito users, let's
remove the last remnant of Cogito-accommodating code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d1bbbe45df (bisect--helper: reimplement `bisect_run` shell function
in C, 2021-09-13), we ported the `bisect run` subcommand to C, including
the part that prints out an error message when the implicit `git bisect
bad` or `git bisect good` failed.
However, the error message was supposed to print out whether the state
was "good" or "bad", but used a bogus (because non-populated) `args`
variable for it. This was fixed in [1], but as of [2] (when
`bisect--helper` was changed to the present `bisect-state') the error
message still talks about implementation details that should not
concern end users.
Fix that, and add a regression test to ensure that the intended form of
the error message.
1. 80c2e9657f (bisect--helper: report actual bisect_state() argument
on error, 2022-01-18
2. f37d0bdd42 (bisect: fix output regressions in v2.30.0, 2022-11-10)
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C, the natural order is for `argc` to come before `argv` by virtue of
the `main()` function declaring the parameters in precisely that order.
It is confusing & distracting, then, when readers familiar with the C
language read code where that order is switched around.
Let's just change the order and avoid that type of developer friction.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We _already_ have a function to determine whether a given `enum
bisect_error` value is non-zero but still _actually_ indicates success.
Let's use it instead of duplicating the logic.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the shell script hands off to the `bisect--helper` to do
_anything_ (except to show the help), it is but a tiny step to let the
helper implement the actual `git bisect` command instead.
This retires `git-bisect.sh`, concluding a multi-year journey that many
hands helped with, in particular Pranit Bauna, Tanushree Tumane and
Miriam Rubio.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
