When creating a bundle, we set up a revision walk, but never release
data associated with it. Furthermore, we create a mostly-shallow copy of
that revision walk where we only adapt its pending objects such that we
can reuse the walk. While that copy must not be released, the pending
objects array need to be.
Plug those memory leaks by releasing the revision walk and the pending
objects of the copied revision walk.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'symref-create' command to the '--stdin' mode 'git-update-ref' to
allow creation of symbolic refs in a transaction. The 'symref-create'
command takes in a <new-target>, which the created <ref> will point to.
Also, support the 'core.prefersymlinkrefs' config, wherein if the config
is set and the filesystem supports symlinks, we create the symbolic ref
as a symlink. We fallback to creating a regular symref if creating the
symlink is unsuccessful.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the REFFILES prerequisite to several tests that assume we're using
the files backend. There are various reasons why we cannot easily
convert those tests to be backend-independent, where the most common
one is that we have no way to write corrupt references into the refdb
via our tooling. We may at a later point in time grow the tooling to
make this possible, but for now we just mark these tests as requiring
the files backend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of our tests access symbolic references via the filesystem
directly. While this works with the current files reference backend, it
this will break once we have a second reference backend in our codebase.
Refactor these tests to instead use git-symbolic-ref(1) or our
`ref-store` test tool. The latter is required in some cases where safety
checks of git-symbolic-ref(1) would otherwise reject writing a symbolic
reference.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert tests that use `test_path_is_file` and `test_path_is_missing` to
instead use a set of helpers `test_ref_exists` and `test_ref_missing`.
These helpers are implemented via the newly introduced `git show-ref
--exists` command. Thus, we can avoid intimate knowledge of how the ref
backend stores references on disk.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite tests that ran "git" inside command substitution and lost the
exit status of "git" so that we notice the failing "git".
Have them use modern patterns such as a "test_cmp" of the expected
outputs instead.
We'll fix more of these these in the subsequent commit, for now we're
only converting the cases where this loss of exit code was combined
with spawning a sub-shell.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
Usually clone tries to use the same local HEAD as the remote (unless the
user has given --branch explicitly). Even if the remote HEAD is detached
or unborn, we can detect those situations with modern versions of Git.
If the remote is too old to support the "unborn" extension (or it has
been disabled via config), then we can't know the name of the remote's
unborn HEAD, and we fall back whatever the local default branch name is
configured to be.
But that leads to one weird corner case. It's rare because it needs a
number of factors:
- the remote has an unborn HEAD
- the remote is too old to support "unborn", or has disabled it
- the remote has another branch "foo"
- the local default branch name is "foo"
In that case you end up with a local clone on an unborn "foo" branch,
disconnected completely from the remote's "foo". This is rare in
practice, but the result is quite confusing.
When choosing "foo", we can double check whether the remote has such a
name, and if so, start our local "foo" at the same spot, rather than
making it unborn.
Note that this causes a test failure in t5605, which is cloning from a
bundle that doesn't contain HEAD (so it behaves like a remote that
doesn't support "unborn"), but has a single "main" branch. That test
expects that we end up in the weird "unborn main" case, where we don't
actually check out the remote branch of the same name. Even though we
have to update the test, this seems like an argument in favor of this
patch: checking out main is what I'd expect from such a bundle.
So this patch updates the test for the new behavior and adds an adjacent
one that checks what the original was going for: if there's no HEAD and
the bundle _doesn't_ have a branch that matches our local default name,
then we end up with nothing checked out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning directly from a local repository, we load a list of refs
based on scanning the $GIT_DIR/refs/ directory of the "server"
repository. If files exist in that directory that do not parse as
hexadecimal hashes, then the ref array used by write_remote_refs()
ends up with some entries with null OIDs. This causes us to hit a BUG()
statement in ref_transaction_create():
BUG: create called without valid new_oid
This BUG() call used to be a die() until 033abf97f (Replace all
die("BUG: ...") calls by BUG() ones, 2018-05-02). Before that, the die()
was added by f04c5b552 (ref_transaction_create(): check that new_sha1 is
valid, 2015-02-17).
The original report for this bug [1] mentioned that this problem did not
exist in Git 2.27.0. The failure bisects unsurprisingly to 968f12fda
(refs: turn on GIT_REF_PARANOIA by default, 2021-09-24). When
GIT_REF_PARANOIA is enabled, this case always fails as far back as I am
able to successfully compile and test the Git codebase.
[1] https://github.com/git-for-windows/git/issues/3781
There are two approaches to consider here. One would be to remove this
BUG() statement in favor of returning with an error. There are only two
callers to ref_transaction_create(), so this would have a limited
impact.
The other approach would be to add special casing in 'git clone' to
avoid this faulty input to the method.
While I originally started with changing 'git clone', I decided that
modifying ref_transaction_create() was a more complete solution. This
prevents failing with a BUG() statement when we already have a good way
to report an error (including a reason for that error) within the
method. Both callers properly check the return value and die() with the
error message, so this is an appropriate direction.
The added test helps check against a regression, but does check that our
intended error message is handled correctly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t5[6-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find a good spot for testing clone with submodules, I
got confused where to add a new test file. There are both tests in t560*
as well as t57* both testing the clone command. t/README claims the
second digit is to indicate the command, which is inconsistent to the
current naming structure.
Rename all t57* tests to be in t56* to follow the pattern of the digits
as laid out in t/README.
It would have been less work to rename t56* => t57* because there are less
files, but the tests in t56* look more basic and I assumed the higher the
last digits the more complicated niche details are tested, so with the patch
now it looks more in order to me.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
