We manually manage the src_dir array with ALLOC_GROW. Using a strvec is
a little more ergonomic, and makes the memory ownership more clear. It
does mean that we copy the strings (which were otherwise just pointers
into the "sources" strvec), but using the same rationale as 9fcd9e4e72
(builtin/mv duplicate string list memory, 2024-05-27), it's just not
enough to be worth worrying about here.
As a bonus, this gets rid of some "int"s used for allocation management
(though in practice these were limited to command-line sizes and thus
not overflowable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This pulls the loop added by b6f51e3db9 (mv: cleanup empty
WORKING_DIRECTORY, 2022-08-09) into a sub-function. That reduces clutter
in cmd_mv() and makes it easier to see that the lifetime of the
a_src_dir strbuf is limited to this code (and thus its cleanup doesn't
need to go after the "out" label).
Another option would be to just declare the strbuf inside the loop,
since it is only used there. But this refactor retains the existing
property that we can reuse the allocated buffer for each iteration of
the loop. That optimization is probably overkill, but I think the
sub-function is more readable anyway, and then keeping the optimization
is basically free.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b6f51e3db9 (mv: cleanup empty WORKING_DIRECTORY, 2022-08-09)
added an auxiliary array where we store directory arguments that we see
while processing the incoming arguments. After actually moving things,
we then use that array to remove now-empty directories, and then
immediately free the array.
But if the actual move queues any errors in only_match_skip_worktree,
that can cause us to jump straight to the "out" label to clean up,
skipping the free() and leaking the array.
Let's push the free() down past the "out" label so that we always clean
up (the array is initialized to NULL, so this is always safe). We'll
hold on to the memory a little longer than necessary, but clarity is
more important than micro-optimizing here.
Note that the adjacent "a_src_dir" strbuf does not suffer the same
problem; it is only allocated during the removal step.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the preceding commit, we have effectively given tracking
memory ownership of submodule gitfile paths. Refactor the code to start
tracking allocated strings in a separate `struct strvec` such that we
can easily plug those leaks. Mark now-passing tests as leak free.
Note that ideally, we wouldn't require two separate data structures to
track those paths. But we do need to store `NULL` pointers for the
gitfile paths such that we can indicate that its corresponding entries
in the other arrays do not have such a path at all. And given that
`struct strvec`s cannot store `NULL` pointers we cannot use them to
store this information.
There is another small gotcha that is easy to miss: you may be wondering
why we don't want to store `SUBMODULE_WITH_GITDIR` in the strvec. This
is because this is a mere sentinel value and not actually a string at
all.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory allocation patterns in git-mv(1) are extremely hard to follow:
We copy around string pointers into manually-managed arrays, some of
which alias each other, but only sometimes, while we also drop some of
those strings at other times without ever daring to free them.
While this may be my own subjective feeling, it seems like others have
given up as the code has multiple calls to `UNLEAK()`. These are not
sufficient though, and git-mv(1) is still leaking all over the place
even with them.
Refactor the code to instead track strings in `struct strvec`. While
this has the effect of effectively duplicating some of the strings
without an actual need, it is way easier to reason about and fixes all
of the aliasing of memory that has been going on. It allows us to get
rid of the `UNLEAK()` calls and also fixes leaks that those calls did
not paper over.
Mark tests which are now leak-free accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
makes the next patch easier, where we will migrate to the paths being
owned by a strvec. given that we are talking about command line
parameters here it's also not like we have tons of allocations that this
would save
while at it, fix a memory leak
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `add_slash()` function will only conditionally return an allocated
string when the passed-in string did not yet have a trailing slash. This
makes the memory ownership harder to track than really necessary.
It's dubious whether this optimization really buys us all that much. The
number of times we execute this function is bounded by the number of
arguments to git-mv(1), so in the typical case we may end up saving an
allocation or two.
Simplify the code to unconditionally return allocated strings.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert builtins to use `the_repository->index` instead of `the_index`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If both directories D1 and D2 already exists, and further there is a
filesystem entity D2/D1, "git mv D1 D2" would fail, and we get an
error message that says:
"cannot move directory over file, source=D1, destination=D2/D1"
regardless of the type of existing "D2/D1". If it is a file, the
message is correct, but if it is a directory, it is not (we could
make the D2/D1 directory a union of its original contents and what
was in D1/, but that is not what we do).
The code that decies to issue the error message only checks for
existence of "D2/D1" and does not care what kind of thing sits at
the path.
Rephrase the message to say
"destination already exists, source=D1, destination=D2/D1"
that would be suitable for any kind of thing being in the way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When moving a directory onto another with `git mv` various checks are
performed. One of of these validates that the destination is not existing.
When calling `lstat` on the destination path and it fails as the path
doesn't exist, some environments seem to overwrite the passed in
`stat` memory nonetheless (I observed this issue on debian 12 of x86_64,
running on OrbStack on ARM, emulated with Rosetta).
This would affect the code that followed as it would still acccess a now
modified `st` structure, which now seems to contain uninitialized memory.
`S_ISDIR(st_dir_mode)` would then typically return false causing the code
to run into a bad case.
The fix avoids overwriting the existing `st` structure, providing an
alternative that exists only for that purpose.
Note that this patch minimizes complexity instead of stack-frame size.
Signed-off-by: Sebastian Thiel <sebastian.thiel@icloud.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hash.h depends upon and includes repository.h, due to the definition and
use of the_hash_algo (defined as the_repository->hash_algo). However,
most headers trying to include hash.h are only interested in the layout
of the structs like object_id. Move the parts of hash.h that do not
depend upon repository.h into a new file hash-ll.h (the "low level"
parts of hash.h), and adjust other files to use this new header where
the convenience inline functions aren't needed.
This allows hash.h and object.h to be fairly small, minimal headers. It
also exposes a lot of hidden dependencies on both path.h (which was
brought in by repository.h) and repository.h (which was previously
implicitly brought in by object.h), so also adjust other files to be
more explicit about what they depend upon.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the rule added in [1] to change "cache_name_pos" to
"index_name_pos", which allows us to get rid of another
"USE_THE_INDEX_COMPATIBILITY_MACROS" macro.
The replacement of "USE_THE_INDEX_COMPATIBILITY_MACROS" here with
"USE_THE_INDEX_VARIABLE" is a manual change on top, now that these
files only use "&the_index", and don't need any compatibility
macros (or functions).
1. 0e6550a2c6 (cocci: add a index-compatibility.pending.cocci,
2022-11-19)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mv A B" in a sparsely populated working tree can be asked to
move a path from a directory that is "in cone" to another directory
that is "out of cone". Handling of such a case has been improved.
* sy/mv-out-of-cone:
builtin/mv.c: fix possible segfault in add_slash()
mv: check overwrite for in-to-out move
advice.h: add advise_on_moving_dirty_path()
mv: cleanup empty WORKING_DIRECTORY
mv: from in-cone to out-of-cone
mv: remove BOTH from enum update_mode
mv: check if <destination> is a SKIP_WORKTREE_DIR
mv: free the with_slash in check_dir_in_index()
mv: rename check_dir_in_index() to empty_dir_has_sparse_contents()
t7002: add tests for moving from in-cone to out-of-cone
A possible segfault was introduced in c08830de41 (mv: check if
<destination> is a SKIP_WORKTREE_DIR, 2022-08-09).
When running t7001 with SANITIZE=address, problem appears when running:
git mv path1/path2/ .
or
git mv directory ../
or
any <destination> that makes dest_path[0] an empty string.
The add_slash() call could segfault when path argument to it is an empty
string, because it makes an out-of-bounds read to decide if an extra
slash '/' needs to be appended to it.
As add_slash() is used to make sure that a valid pathname to a file in
the given directory can be made by appending a filename after the value
returned from it, if path is an empty string, we want to return it
as-is. The path to a file "F" in the top-level of the working tree
(i.e. path=="") is formed by appending "F" after "" (i.e. path) without
any slash in between.
So, just like the case where a non-empty path already ends with a slash,
return an empty path as-is.
Reported-by: Jeff King <peff@peff.net>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add checking logic for overwriting when moving from in-cone to
out-of-cone. It is the index version of the original overwrite logic.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an advice.
When the user use `git mv --sparse <dirty-path> <destination>`, Git
will warn the user to use `git add --sparse <paths>` then use
`git sparse-checkout reapply` to apply the sparsity rules.
Add a few lines to previous "move dirty path" tests so we can test
this new advice is working.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving from-in-to-out may leave an empty <source>
directory on-disk (this kind of directory is marked as
WORKING_DIRECTORY).
Cleanup such directories if they are empty (don't have any entries
under them).
Modify two tests that take <source> as WORKING_DIRECTORY to test
this behavior.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving an in-cone <source> to an out-of-cone <destination>
was not possible, mainly because such <destination> is a directory that
is not present in the working tree.
Change the behavior so that we can move an in-cone <source> to
out-of-cone <destination> when --sparse is supplied.
Notice that <destination> can also be an out-of-cone file path, rather
than a directory.
Such <source> can be either clean or dirty, and moving it results in
different behaviors:
A clean move should move <source> to <destination> in the index (do
*not* create <destination> in the worktree), then delete <source> from
the worktree.
A dirty move should move the <source> to the <destination>, both in the
working tree and the index, but should *not* remove the resulted path
from the working tree and should *not* turn on its CE_SKIP_WORKTREE bit.
Optional reading
================
We are strict about cone mode when <destination> is a file path.
The reason is that some of the previous tests that use no-cone mode in
t7002 are keep breaking, mainly because the `dst_mode = SPARSE;` line
added in this patch.
Most features developed in both "from-out-to-in" and "from-in-to-out"
only care about cone mode situation, as no-cone mode is becoming
irrelevant. And because assigning `SPARSE` to `dst_mode` when the
repo is in no-cone mode causes miscellaneous bugs, we should just leave
this new functionality to be exclusive cone mode and save some time.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since BOTH is not used anywhere in the code and its meaning is unclear,
remove it.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, <destination> is assumed to be in the working tree. If it is
not found as a directory, then it is determined to be either a regular file
path, or error out if used under the second form (move into a directory)
of 'git-mv'. Such behavior is not ideal, mainly because Git does not
look into the index for <destination>, which could potentially be a
SKIP_WORKTREE_DIR, which we need to determine for the later "moving from
in-cone to out-of-cone" patch.
Change the logic so that Git first check if <destination> is a directory
with all its contents sparsified (a SKIP_WORKTREE_DIR).
If <destination> is such a sparse directory, then we should modify the
index the same way as we would if this were a non-sparse directory. We
must be careful to ensure that the <destination> is marked with
SKIP_WORKTREE_DIR.
Also add a `dst_w_slash` to reuse the result from `add_slash()`, which
was everywhere and can be simplified.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
with_slash may be a malloc'd pointer, and when it is, free it.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Method check_dir_in_index() introduced in b91a2b6594 (mv: add
check_dir_in_index() and solve general dir check issue, 2022-06-30)
does not describe its intent and behavior well.
Change its name to empty_dir_has_sparse_contents(), which more
precisely describes its purpose.
Reverse the return values, check_dir_in_index() return 0 for success
and 1 for failure; reverse the values so empty_dir_has_sparse_contents()
return 1 for success and 0 for failure. These values are more intuitive
because 1 usually means "has" and 0 means "not found".
Also modify the documentation to better align with the method's
intent and behavior.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply Coccinelle rule to turn raw memmove() into MOVE_ARRAY() cpp
macro, which would improve maintainability and readability.
* jc/builtin-mv-move-array:
builtin/mv.c: use the MOVE_ARRAY() macro instead of memmove()
The variables 'source', 'destination', and 'submodule_gitfile' are
all of type "const char **", and an element of such an array is of
"type const char *", but these memmove() calls were written as if
these variables are of type "char **".
Once these memmove() calls are fixed to use the correct type to
compute the number of bytes to be moved, e.g.
- memmove(source + i, source + i + 1, n * sizeof(char *));
+ memmove(source + i, source + i + 1, n * sizeof(const char *));
existing contrib/coccinelle/array.cocci rules can recognize them as
candidates for turning into MOVE_ARRAY().
While at it, use CALLOC_ARRAY() instead of xcalloc() to allocate the
modes[] array that is involved in the change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a <source> directory which is not on-disk due
to its existence outside of sparse-checkout cone, "giv mv" command
errors out with "bad source".
Add a helper check_dir_in_index() function to see if a directory
name exists in the index. Also add a SKIP_WORKTREE_DIR bit to mark
such directories.
Change the checking logic, so that such <source> directory makes
"giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Derrick [1], move the in-line definition of
"enum update_mode" to the top of the file and make it use "flags"
mode (each state is a different bit in the word).
Change the flag assignments from '=' (single assignment) to '|='
(additive). Also change flag evaluation from '==' to '&', etc.
[1] https://lore.kernel.org/git/22aadea2-9330-aa9e-7b6a-834585189144@github.com/
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a sparse file into cone can result in unwarned
overwrite of existing entry. The expected behavior is that if the
<destination> exists in the entry, user should be prompted to supply
a [-f|--force] to carry out the operation, or the operation should
fail.
Add a check mechanism to do that.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, moving a <source> file which is not on-disk but exists in
index as a SKIP_WORKTREE enabled cache entry, "giv mv" command errors
out with "bad source".
Change the checking logic, so that such <source>
file makes "giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous if/else-if chain are highly nested and hard to develop/extend.
Refactor to decouple this if/else-if chain by using goto to jump ahead.
Suggested-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, "git mv" a sparse file from out-of-cone to
in-cone does not update the moved file's sparsity (remove its
SKIP_WORKTREE bit). And the corresponding cache entry is, unexpectedly,
not checked out in the working tree.
Update the behavior so that:
1. Moving from out-of-cone to in-cone removes the SKIP_WORKTREE bit from
corresponding cache entry.
2. The moved cache entry is checked out in the working tree to reflect
the updated sparsity.
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cmd_mv() does not operate on cache entries and instead directly
checks the filesystem, we can only use path_in_sparse_checkout() as a
mechanism for seeing if a path is sparse or not. Be sure to skip
returning a failure if '-k' is specified.
To ensure that the advice around sparse paths is the only reason a move
failed, be sure to check this as the very last thing before inserting
into the src_for_dst list.
The tests cover a variety of cases such as whether the target is tracked
or untracked, and whether the source or destination are in or outside of
the sparse-checkout definition.
Helped-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These leaks all happen at the end of cmd_mv, hence don't matter in any
way. But we still fix the easy ones and squash the rest to get us closer
to being able to run tests without leaks.
LSAN output from t0050:
Direct leak of 384 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa0a7e1 in add_entry string-list.c:44:2
#3 0xa0a7e1 in string_list_insert string-list.c:58:14
#4 0x5dac03 in cmd_mv builtin/mv.c:248:4
#5 0x4ce83e in run_builtin git.c:475:11
#6 0x4ccafe in handle_builtin git.c:729:3
#7 0x4cb01c in run_argv git.c:818:4
#8 0x4cb01c in cmd_main git.c:949:19
#9 0x6bd9ad in main common-main.c:52:11
#10 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bd09 in do_xmalloc wrapper.c:41:8
#2 0x5dbc34 in internal_prefix_pathspec builtin/mv.c:32:2
#3 0x5da575 in cmd_mv builtin/mv.c:158:14
#4 0x4ce83e in run_builtin git.c:475:11
#5 0x4ccafe in handle_builtin git.c:729:3
#6 0x4cb01c in run_argv git.c:818:4
#7 0x4cb01c in cmd_main git.c:949:19
#8 0x6bd9ad in main common-main.c:52:11
#9 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bd09 in do_xmalloc wrapper.c:41:8
#2 0x5dbc34 in internal_prefix_pathspec builtin/mv.c:32:2
#3 0x5da4e4 in cmd_mv builtin/mv.c:148:11
#4 0x4ce83e in run_builtin git.c:475:11
#5 0x4ccafe in handle_builtin git.c:729:3
#6 0x4cb01c in run_argv git.c:818:4
#7 0x4cb01c in cmd_main git.c:949:19
#8 0x6bd9ad in main common-main.c:52:11
#9 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x49a9a2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xa8c119 in xcalloc wrapper.c:140:8
#2 0x5da585 in cmd_mv builtin/mv.c:159:22
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6bd9ad in main common-main.c:52:11
#8 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x49a9a2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xa8c119 in xcalloc wrapper.c:140:8
#2 0x5da4f8 in cmd_mv builtin/mv.c:149:10
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6bd9ad in main common-main.c:52:11
#8 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa00226 in strbuf_grow strbuf.c:98:2
#3 0xa00226 in strbuf_vaddf strbuf.c:394:3
#4 0xa065c7 in xstrvfmt strbuf.c:981:2
#5 0xa065c7 in xstrfmt strbuf.c:991:8
#6 0x9e7ce7 in prefix_path_gently setup.c:115:15
#7 0x9e7fa6 in prefix_path setup.c:128:12
#8 0x5dbdbf in internal_prefix_pathspec builtin/mv.c:55:23
#9 0x5da575 in cmd_mv builtin/mv.c:158:14
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6bd9ad in main common-main.c:52:11
#15 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa00226 in strbuf_grow strbuf.c:98:2
#3 0xa00226 in strbuf_vaddf strbuf.c:394:3
#4 0xa065c7 in xstrvfmt strbuf.c:981:2
#5 0xa065c7 in xstrfmt strbuf.c:991:8
#6 0x9e7ce7 in prefix_path_gently setup.c:115:15
#7 0x9e7fa6 in prefix_path setup.c:128:12
#8 0x5dbdbf in internal_prefix_pathspec builtin/mv.c:55:23
#9 0x5da4e4 in cmd_mv builtin/mv.c:148:11
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6bd9ad in main common-main.c:52:11
#15 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 558 byte(s) leaked in 7 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence, on a case-insensitive file system,
(strictly speeking with core.ignorecase=true)
leads to an assertion failure and leaves .git/index.lock behind.
git init
echo foo >foo
git add foo
git mv foo FOO
git mv foo bar
This regression was introduced in Commit 9b906af657,
"git-mv: improve error message for conflicted file"
The bugfix is to change the "file exist case-insensitive in the index"
into the correct "file exist (case-sensitive) in the index".
This avoids the "assert" later in the code and keeps setting up the
"ce" pointer for ce_stage(ce) done in the next else if.
This fixes
https://github.com/git-for-windows/git/issues/2920
Reported-By: Dan Moseley <Dan.Moseley@microsoft.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
