mirror of
https://github.com/git/git
synced 2024-08-25 02:35:46 +00:00
Fix incorrect error check while reading deflated pack data
The loop in get_size_from_delta() feeds a deflated delta data from the pack stream _until_ we get inflated result of 20 bytes[*] or we reach the end of stream. Side note. This magic number 20 does not have anything to do with the size of the hash we use, but comes from1a3b55c
(reduce delta head inflated size, 2006-10-18). The loop reads like this: do { in = use_pack(); stream.next_in = in; st = git_inflate(&stream, Z_FINISH); curpos += stream.next_in - in; } while ((st == Z_OK || st == Z_BUF_ERROR) && stream.total_out < sizeof(delta_head)); This git_inflate() can return: - Z_STREAM_END, if use_pack() fed it enough input and the delta itself was smaller than 20 bytes; - Z_OK, when some progress has been made; - Z_BUF_ERROR, if no progress is possible, because we either ran out of input (due to corrupt pack), or we ran out of output before we saw the end of the stream. The fixb3118bd
(sha1_file: Fix infinite loop when pack is corrupted, 2009-10-14) attempted was against a corruption that appears to be a valid stream that produces a result larger than the output buffer, but we are not even trying to read the stream to the end in this loop. If avail_out becomes zero, total_out will be the same as sizeof(delta_head) so the loop will terminate without the "fix". There is no fix fromb3118bd
needed for this loop, in other words. The loop in unpack_compressed_entry() is quite a different story. It feeds a deflated stream (either delta or base) and allows the stream to produce output up to what we expect but no more. do { in = use_pack(); stream.next_in = in; st = git_inflate(&stream, Z_FINISH); curpos += stream.next_in - in; } while (st == Z_OK || st == Z_BUF_ERROR) This _does_ risk falling into an endless interation, as we can exhaust avail_out if the length we expect is smaller than what the stream wants to produce (due to pack corruption). In such a case, avail_out will become zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may not) be zero. But this is not a right fix: do { in = use_pack(); stream.next_in = in; st = git_inflate(&stream, Z_FINISH); + if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out) + break; /* wants more input??? */ curpos += stream.next_in - in; } while (st == Z_OK || st == Z_BUF_ERROR) as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run out before reading the end of stream marker. In such a case, both avail_in and avail_out would be zero, and the loop should iterate to allow the end of stream marker to be seen by inflate from the input stream. The right fix for this loop is likely to be to increment the initial avail_out by one (we allocate one extra byte to terminate it with NUL anyway, so there is no risk to overrun the buffer), and break out if we see that avail_out has become zero, in order to detect that the stream wants to produce more than what we expect. After the loop, we have a check that exactly tests this condition: if ((st != Z_STREAM_END) || stream.total_out != size) { free(buffer); return NULL; } So here is a patch (without my previous botched attempts) to fix this issue. The first hunk reverts the corresponding hunk fromb3118bd
, and the second hunk is the same fix proposed earlier. Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is contained in:
parent
b3118bdc91
commit
39eea7bdd9
|
@ -1357,8 +1357,6 @@ unsigned long get_size_from_delta(struct packed_git *p,
|
||||||
in = use_pack(p, w_curs, curpos, &stream.avail_in);
|
in = use_pack(p, w_curs, curpos, &stream.avail_in);
|
||||||
stream.next_in = in;
|
stream.next_in = in;
|
||||||
st = git_inflate(&stream, Z_FINISH);
|
st = git_inflate(&stream, Z_FINISH);
|
||||||
if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out))
|
|
||||||
break;
|
|
||||||
curpos += stream.next_in - in;
|
curpos += stream.next_in - in;
|
||||||
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
|
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
|
||||||
stream.total_out < sizeof(delta_head));
|
stream.total_out < sizeof(delta_head));
|
||||||
|
@ -1589,15 +1587,15 @@ static void *unpack_compressed_entry(struct packed_git *p,
|
||||||
buffer[size] = 0;
|
buffer[size] = 0;
|
||||||
memset(&stream, 0, sizeof(stream));
|
memset(&stream, 0, sizeof(stream));
|
||||||
stream.next_out = buffer;
|
stream.next_out = buffer;
|
||||||
stream.avail_out = size;
|
stream.avail_out = size + 1;
|
||||||
|
|
||||||
git_inflate_init(&stream);
|
git_inflate_init(&stream);
|
||||||
do {
|
do {
|
||||||
in = use_pack(p, w_curs, curpos, &stream.avail_in);
|
in = use_pack(p, w_curs, curpos, &stream.avail_in);
|
||||||
stream.next_in = in;
|
stream.next_in = in;
|
||||||
st = git_inflate(&stream, Z_FINISH);
|
st = git_inflate(&stream, Z_FINISH);
|
||||||
if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out))
|
if (!stream.avail_out)
|
||||||
break;
|
break; /* the payload is larger than it should be */
|
||||||
curpos += stream.next_in - in;
|
curpos += stream.next_in - in;
|
||||||
} while (st == Z_OK || st == Z_BUF_ERROR);
|
} while (st == Z_OK || st == Z_BUF_ERROR);
|
||||||
git_inflate_end(&stream);
|
git_inflate_end(&stream);
|
||||||
|
|
Loading…
Reference in a new issue