git/object-store.h

379 lines
12 KiB
C
Raw Normal View History

#ifndef OBJECT_STORE_H
#define OBJECT_STORE_H
#include "cache.h"
#include "oidmap.h"
#include "list.h"
#include "sha1-array.h"
#include "strbuf.h"
struct object_directory {
struct object_directory *next;
/*
* Used to store the results of readdir(3) calls when we are OK
* sacrificing accuracy due to races for speed. That includes
sha1-file: use loose object cache for quick existence check In cases where we expect to ask has_sha1_file() about a lot of objects that we are not likely to have (e.g., during fetch negotiation), we already use OBJECT_INFO_QUICK to sacrifice accuracy (due to racing with a simultaneous write or repack) for speed (we avoid re-scanning the pack directory). However, even checking for loose objects can be expensive, as we will stat() each one. On many systems this cost isn't too noticeable, but stat() can be particularly slow on some operating systems, or due to network filesystems. Since the QUICK flag already tells us that we're OK with a slightly stale answer, we can use that as a cue to look in our in-memory cache of each object directory. That basically trades an in-memory binary search for a stat() call. Note that it is possible for this to actually be _slower_. We'll do a full readdir() to fill the cache, so if you have a very large number of loose objects and a very small number of lookups, that readdir() may end up more expensive. This shouldn't be a big deal in practice. If you have a large number of reachable loose objects, you'll already run into performance problems (which you should remedy by repacking). You may have unreachable objects which wouldn't otherwise impact performance. Usually these would go away with the prune step of "git gc", but they may be held for up to 2 weeks in the default configuration. So it comes down to how many such objects you might reasonably expect to have, how much slower is readdir() on N entries versus M stat() calls (and here we really care about the syscall backing readdir(), like getdents() on Linux, but I'll just call this readdir() below). If N is much smaller than M (a typical packed repo), we know this is a big win (few readdirs() followed by many uses of the resulting cache). When N and M are similar in size, it's also a win. We care about the latency of making a syscall, and readdir() should be giving us many values in a single call. How many? On Linux, running "strace -e getdents ls" shows a 32k buffer getting 512 entries per call (which is 64 bytes per entry; the name itself is 38 bytes, plus there are some other fields). So we can imagine that this is always a win as long as the number of loose objects in the repository is a factor of 500 less than the number of lookups you make. It's hard to auto-tune this because we don't generally know up front how many lookups we're going to do. But it's unlikely for this to perform significantly worse. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 14:54:42 +00:00
* object existence with OBJECT_INFO_QUICK, as well as
* our search for unique abbreviated hashes. Don't use it for tasks
* requiring greater accuracy!
*
* Be sure to call odb_load_loose_cache() before using.
*/
char loose_objects_subdir_seen[256];
struct oid_array loose_objects_cache[256];
/*
* Path to the alternative object store. If this is a relative path,
* it is relative to the current working directory.
*/
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 14:50:39 +00:00
char *path;
};
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 14:50:39 +00:00
void prepare_alt_odb(struct repository *r);
char *compute_alternate_path(const char *path, struct strbuf *err);
typedef int alt_odb_fn(struct object_directory *, void *);
int foreach_alt_odb(alt_odb_fn, void*);
/*
* Add the directory to the on-disk alternates file; the new entry will also
* take effect in the current process.
*/
void add_to_alternates_file(const char *dir);
/*
* Add the directory to the in-memory list of alternates (along with any
* recursive alternates it points to), but do not modify the on-disk alternates
* file.
*/
void add_to_alternates_memory(const char *dir);
/*
* Populate and return the loose object cache array corresponding to the
* given object ID.
*/
struct oid_array *odb_loose_cache(struct object_directory *odb,
const struct object_id *oid);
/* Empty the loose object cache for the specified object directory. */
void odb_clear_loose_cache(struct object_directory *odb);
struct packed_git {
struct packed_git *next;
struct list_head mru;
struct pack_window *windows;
off_t pack_size;
const void *index_data;
size_t index_size;
uint32_t num_objects;
uint32_t num_bad_objects;
unsigned char *bad_object_sha1;
int index_version;
time_t mtime;
int pack_fd;
int index; /* for builtin/pack-objects.c */
unsigned pack_local:1,
pack_keep:1,
pack_keep_in_core:1,
freshened:1,
do_not_close:1,
pack_promisor:1;
unsigned char hash[GIT_MAX_RAWSZ];
struct revindex_entry *revindex;
/* something like ".git/objects/pack/xxxxx.pack" */
char pack_name[FLEX_ARRAY]; /* more */
};
struct multi_pack_index;
struct raw_object_store {
/*
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 14:50:39 +00:00
* Set of all object directories; the main directory is first (and
* cannot be NULL after initialization). Subsequent directories are
* alternates.
*/
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 14:50:39 +00:00
struct object_directory *odb;
struct object_directory **odb_tail;
int loaded_alternates;
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 14:50:39 +00:00
/*
* A list of alternate object directories loaded from the environment;
* this should not generally need to be accessed directly, but will
* populate the "odb" list when prepare_alt_odb() is run.
*/
char *alternate_db;
/*
* Objects that should be substituted by other objects
* (see git-replace(1)).
*/
struct oidmap *replace_map;
struct commit_graph *commit_graph;
unsigned commit_graph_attempted : 1; /* if loading has been attempted */
/*
* private data
*
* should only be accessed directly by packfile.c and midx.c
*/
struct multi_pack_index *multi_pack_index;
/*
* private data
*
* should only be accessed directly by packfile.c
*/
struct packed_git *packed_git;
/* A most-recently-used ordered version of the packed_git list. */
struct list_head packed_git_mru;
/*
* A linked list containing all packfiles, starting with those
* contained in the multi_pack_index.
*/
struct packed_git *all_packs;
/*
* A fast, rough count of the number of objects in the repository.
* These two fields are not meant for direct access. Use
* approximate_object_count() instead.
*/
unsigned long approximate_object_count;
unsigned approximate_object_count_valid : 1;
/*
* Whether packed_git has already been populated with this repository's
* packs.
*/
unsigned packed_git_initialized : 1;
};
struct raw_object_store *raw_object_store_new(void);
void raw_object_store_clear(struct raw_object_store *o);
/*
* Put in `buf` the name of the file in the local object database that
* would be used to store a loose object with the specified oid.
*/
const char *loose_object_path(struct repository *r, struct strbuf *buf,
const struct object_id *oid);
void *map_loose_object(struct repository *r, const struct object_id *oid,
unsigned long *size);
extern void *read_object_file_extended(struct repository *r,
const struct object_id *oid,
enum object_type *type,
unsigned long *size, int lookup_replace);
static inline void *repo_read_object_file(struct repository *r,
const struct object_id *oid,
enum object_type *type,
unsigned long *size)
{
return read_object_file_extended(r, oid, type, size, 1);
}
#ifndef NO_THE_REPOSITORY_COMPATIBILITY_MACROS
#define read_object_file(oid, type, size) repo_read_object_file(the_repository, oid, type, size)
#endif
/* Read and unpack an object file into memory, write memory to an object file */
int oid_object_info(struct repository *r, const struct object_id *, unsigned long *);
extern int hash_object_file(const void *buf, unsigned long len,
const char *type, struct object_id *oid);
extern int write_object_file(const void *buf, unsigned long len,
const char *type, struct object_id *oid);
extern int hash_object_file_literally(const void *buf, unsigned long len,
const char *type, struct object_id *oid,
unsigned flags);
extern int pretend_object_file(void *, unsigned long, enum object_type,
struct object_id *oid);
extern int force_object_loose(const struct object_id *oid, time_t mtime);
/*
* Open the loose object at path, check its hash, and return the contents,
* type, and size. If the object is a blob, then "contents" may return NULL,
* to allow streaming of large blobs.
*
* Returns 0 on success, negative on error (details may be written to stderr).
*/
int read_loose_object(const char *path,
const struct object_id *expected_oid,
enum object_type *type,
unsigned long *size,
void **contents);
#ifndef NO_THE_REPOSITORY_COMPATIBILITY_MACROS
#define has_sha1_file_with_flags(sha1, flags) repo_has_sha1_file_with_flags(the_repository, sha1, flags)
#define has_sha1_file(sha1) repo_has_sha1_file(the_repository, sha1)
#endif
/* Same as the above, except for struct object_id. */
int repo_has_object_file(struct repository *r, const struct object_id *oid);
int repo_has_object_file_with_flags(struct repository *r,
const struct object_id *oid, int flags);
#ifndef NO_THE_REPOSITORY_COMPATIBILITY_MACROS
#define has_object_file(oid) repo_has_object_file(the_repository, oid)
#define has_object_file_with_flags(oid, flags) repo_has_object_file_with_flags(the_repository, oid, flags)
#endif
/*
* Return true iff an alternate object database has a loose object
* with the specified name. This function does not respect replace
* references.
*/
extern int has_loose_object_nonlocal(const struct object_id *);
extern void assert_oid_type(const struct object_id *oid, enum object_type expect);
struct object_info {
/* Request */
enum object_type *typep;
unsigned long *sizep;
off_t *disk_sizep;
unsigned char *delta_base_sha1;
struct strbuf *type_name;
void **contentp;
/* Response */
enum {
OI_CACHED,
OI_LOOSE,
OI_PACKED,
OI_DBCACHED
} whence;
union {
/*
* struct {
* ... Nothing to expose in this case
* } cached;
* struct {
* ... Nothing to expose in this case
* } loose;
*/
struct {
struct packed_git *pack;
off_t offset;
unsigned int is_delta;
} packed;
} u;
};
/*
* Initializer for a "struct object_info" that wants no items. You may
* also memset() the memory to all-zeroes.
*/
#define OBJECT_INFO_INIT {NULL}
/* Invoke lookup_replace_object() on the given hash */
#define OBJECT_INFO_LOOKUP_REPLACE 1
/* Allow reading from a loose object file of unknown/bogus type */
#define OBJECT_INFO_ALLOW_UNKNOWN_TYPE 2
/* Do not check cached storage */
#define OBJECT_INFO_SKIP_CACHED 4
/* Do not retry packed storage after checking packed and loose storage */
#define OBJECT_INFO_QUICK 8
/* Do not check loose object */
#define OBJECT_INFO_IGNORE_LOOSE 16
int oid_object_info_extended(struct repository *r,
const struct object_id *,
struct object_info *, unsigned flags);
/*
* Iterate over the files in the loose-object parts of the object
* directory "path", triggering the following callbacks:
*
* - loose_object is called for each loose object we find.
*
* - loose_cruft is called for any files that do not appear to be
* loose objects. Note that we only look in the loose object
* directories "objects/[0-9a-f]{2}/", so we will not report
* "objects/foobar" as cruft.
*
* - loose_subdir is called for each top-level hashed subdirectory
* of the object directory (e.g., "$OBJDIR/f0"). It is called
* after the objects in the directory are processed.
*
* Any callback that is NULL will be ignored. Callbacks returning non-zero
* will end the iteration.
*
* In the "buf" variant, "path" is a strbuf which will also be used as a
* scratch buffer, but restored to its original contents before
* the function returns.
*/
typedef int each_loose_object_fn(const struct object_id *oid,
const char *path,
void *data);
typedef int each_loose_cruft_fn(const char *basename,
const char *path,
void *data);
typedef int each_loose_subdir_fn(unsigned int nr,
const char *path,
void *data);
int for_each_file_in_obj_subdir(unsigned int subdir_nr,
struct strbuf *path,
each_loose_object_fn obj_cb,
each_loose_cruft_fn cruft_cb,
each_loose_subdir_fn subdir_cb,
void *data);
int for_each_loose_file_in_objdir(const char *path,
each_loose_object_fn obj_cb,
each_loose_cruft_fn cruft_cb,
each_loose_subdir_fn subdir_cb,
void *data);
int for_each_loose_file_in_objdir_buf(struct strbuf *path,
each_loose_object_fn obj_cb,
each_loose_cruft_fn cruft_cb,
each_loose_subdir_fn subdir_cb,
void *data);
/* Flags for for_each_*_object() below. */
enum for_each_object_flags {
/* Iterate only over local objects, not alternates. */
FOR_EACH_OBJECT_LOCAL_ONLY = (1<<0),
/* Only iterate over packs obtained from the promisor remote. */
FOR_EACH_OBJECT_PROMISOR_ONLY = (1<<1),
/*
* Visit objects within a pack in packfile order rather than .idx order
*/
FOR_EACH_OBJECT_PACK_ORDER = (1<<2),
};
/*
* Iterate over all accessible loose objects without respect to
* reachability. By default, this includes both local and alternate objects.
* The order in which objects are visited is unspecified.
*
* Any flags specific to packs are ignored.
*/
int for_each_loose_object(each_loose_object_fn, void *,
enum for_each_object_flags flags);
/*
* Iterate over all accessible packed objects without respect to reachability.
* By default, this includes both local and alternate packs.
*
* Note that some objects may appear twice if they are found in multiple packs.
* Each pack is visited in an unspecified order. By default, objects within a
* pack are visited in pack-idx order (i.e., sorted by oid).
*/
typedef int each_packed_object_fn(const struct object_id *oid,
struct packed_git *pack,
uint32_t pos,
void *data);
int for_each_object_in_pack(struct packed_git *p,
each_packed_object_fn, void *data,
enum for_each_object_flags flags);
int for_each_packed_object(each_packed_object_fn, void *,
enum for_each_object_flags flags);
#endif /* OBJECT_STORE_H */