git/submodule-config.c

1037 lines
27 KiB
C
Raw Normal View History

#include "git-compat-util.h"
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
#include "dir.h"
#include "environment.h"
#include "gettext.h"
#include "hex.h"
#include "path.h"
#include "repository.h"
#include "config.h"
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
#include "submodule-config.h"
#include "submodule.h"
#include "strbuf.h"
#include "object-name.h"
#include "object-store-ll.h"
#include "parse-options.h"
#include "thread-utils.h"
branch: add --recurse-submodules option for branch creation To improve the submodules UX, we would like to teach Git to handle branches in submodules. Start this process by teaching "git branch" the --recurse-submodules option so that "git branch --recurse-submodules topic" will create the `topic` branch in the superproject and its submodules. Although this commit does not introduce breaking changes, it does not work well with existing --recurse-submodules commands because "git branch --recurse-submodules" writes to the submodule ref store, but most commands only consider the superproject gitlink and ignore the submodule ref store. For example, "git checkout --recurse-submodules" will check out the commits in the superproject gitlinks (and put the submodules in detached HEAD) instead of checking out the submodule branches. Because of this, this commit introduces a new configuration value, `submodule.propagateBranches`. The plan is for Git commands to prioritize submodule ref store information over superproject gitlinks if this value is true. Because "git branch --recurse-submodules" writes to submodule ref stores, for the sake of clarity, it will not function unless this configuration value is set. This commit also includes changes that support working with submodules from a superproject commit because "branch --recurse-submodules" (and future commands) need to read .gitmodules and gitlinks from the superproject commit, but submodules are typically read from the filesystem's .gitmodules and the index's gitlinks. These changes are: * add a submodules_of_tree() helper that gives the relevant information of an in-tree submodule (e.g. path and oid) and initializes the repository * add is_tree_submodule_active() by adding a treeish_name parameter to is_submodule_active() * add the "submoduleNotUpdated" advice to advise users to update the submodules in their trees Incidentally, fix an incorrect usage string that combined the 'list' usage of git branch (-l) with the 'create' usage; this string has been incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use parse_options., 2007-10-07). Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-29 00:04:45 +00:00
#include "tree-walk.h"
#include "url.h"
#include "urlmatch.h"
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
/*
* submodule cache lookup structure
* There is one shared set of 'struct submodule' entries which can be
* looked up by their sha1 blob id of the .gitmodules file and either
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
* using path or name as key.
* for_path stores submodule entries with path as key
* for_name stores submodule entries with name as key
*/
struct submodule_cache {
struct hashmap for_path;
struct hashmap for_name;
unsigned initialized:1;
unsigned gitmodules_read:1;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
};
/*
* thin wrapper struct needed to insert 'struct submodule' entries to
* the hashmap
*/
struct submodule_entry {
struct hashmap_entry ent;
struct submodule *config;
};
enum lookup_type {
lookup_name,
lookup_path
};
static int config_path_cmp(const void *cmp_data UNUSED,
const struct hashmap_entry *eptr,
const struct hashmap_entry *entry_or_key,
const void *keydata UNUSED)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
const struct submodule_entry *a, *b;
a = container_of(eptr, const struct submodule_entry, ent);
b = container_of(entry_or_key, const struct submodule_entry, ent);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
return strcmp(a->config->path, b->config->path) ||
!oideq(&a->config->gitmodules_oid, &b->config->gitmodules_oid);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
static int config_name_cmp(const void *cmp_data UNUSED,
const struct hashmap_entry *eptr,
const struct hashmap_entry *entry_or_key,
const void *keydata UNUSED)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
const struct submodule_entry *a, *b;
a = container_of(eptr, const struct submodule_entry, ent);
b = container_of(entry_or_key, const struct submodule_entry, ent);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
return strcmp(a->config->name, b->config->name) ||
!oideq(&a->config->gitmodules_oid, &b->config->gitmodules_oid);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
static struct submodule_cache *submodule_cache_alloc(void)
{
return xcalloc(1, sizeof(struct submodule_cache));
}
static void submodule_cache_init(struct submodule_cache *cache)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
hashmap_init(&cache->for_path, config_path_cmp, NULL, 0);
hashmap_init(&cache->for_name, config_name_cmp, NULL, 0);
cache->initialized = 1;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
static void free_one_config(struct submodule_entry *entry)
{
free((void *) entry->config->path);
free((void *) entry->config->name);
free((void *) entry->config->branch);
free((void *) entry->config->update_strategy.command);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
free(entry->config);
}
static void submodule_cache_clear(struct submodule_cache *cache)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
struct hashmap_iter iter;
struct submodule_entry *entry;
if (!cache->initialized)
return;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
/*
* We iterate over the name hash here to be symmetric with the
* allocation of struct submodule entries. Each is allocated by
* their .gitmodules blob sha1 and submodule name.
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
*/
hashmap_for_each_entry(&cache->for_name, &iter, entry,
ent /* member name */)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
free_one_config(entry);
hashmap_clear_and_free(&cache->for_path, struct submodule_entry, ent);
hashmap_clear_and_free(&cache->for_name, struct submodule_entry, ent);
cache->initialized = 0;
cache->gitmodules_read = 0;
}
void submodule_cache_free(struct submodule_cache *cache)
{
submodule_cache_clear(cache);
free(cache);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
static unsigned int hash_oid_string(const struct object_id *oid,
const char *string)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
return memhash(oid->hash, the_hash_algo->rawsz) + strhash(string);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
static void cache_put_path(struct submodule_cache *cache,
struct submodule *submodule)
{
unsigned int hash = hash_oid_string(&submodule->gitmodules_oid,
submodule->path);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
struct submodule_entry *e = xmalloc(sizeof(*e));
hashmap_entry_init(&e->ent, hash);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
e->config = submodule;
hashmap_put(&cache->for_path, &e->ent);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
static void cache_remove_path(struct submodule_cache *cache,
struct submodule *submodule)
{
unsigned int hash = hash_oid_string(&submodule->gitmodules_oid,
submodule->path);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
struct submodule_entry e;
struct submodule_entry *removed;
hashmap_entry_init(&e.ent, hash);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
e.config = submodule;
removed = hashmap_remove_entry(&cache->for_path, &e, ent, NULL);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
free(removed);
}
static void cache_add(struct submodule_cache *cache,
struct submodule *submodule)
{
unsigned int hash = hash_oid_string(&submodule->gitmodules_oid,
submodule->name);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
struct submodule_entry *e = xmalloc(sizeof(*e));
hashmap_entry_init(&e->ent, hash);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
e->config = submodule;
hashmap_add(&cache->for_name, &e->ent);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
static const struct submodule *cache_lookup_path(struct submodule_cache *cache,
const struct object_id *gitmodules_oid, const char *path)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
struct submodule_entry *entry;
unsigned int hash = hash_oid_string(gitmodules_oid, path);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
struct submodule_entry key;
struct submodule key_config;
oidcpy(&key_config.gitmodules_oid, gitmodules_oid);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
key_config.path = path;
hashmap_entry_init(&key.ent, hash);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
key.config = &key_config;
entry = hashmap_get_entry(&cache->for_path, &key, ent, NULL);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
if (entry)
return entry->config;
return NULL;
}
static struct submodule *cache_lookup_name(struct submodule_cache *cache,
const struct object_id *gitmodules_oid, const char *name)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
struct submodule_entry *entry;
unsigned int hash = hash_oid_string(gitmodules_oid, name);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
struct submodule_entry key;
struct submodule key_config;
oidcpy(&key_config.gitmodules_oid, gitmodules_oid);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
key_config.name = name;
hashmap_entry_init(&key.ent, hash);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
key.config = &key_config;
entry = hashmap_get_entry(&cache->for_name, &key, ent, NULL);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
if (entry)
return entry->config;
return NULL;
}
submodule-config: verify submodule names as paths Submodule "names" come from the untrusted .gitmodules file, but we blindly append them to $GIT_DIR/modules to create our on-disk repo paths. This means you can do bad things by putting "../" into the name (among other things). Let's sanity-check these names to avoid building a path that can be exploited. There are two main decisions: 1. What should the allowed syntax be? It's tempting to reuse verify_path(), since submodule names typically come from in-repo paths. But there are two reasons not to: a. It's technically more strict than what we need, as we really care only about breaking out of the $GIT_DIR/modules/ hierarchy. E.g., having a submodule named "foo/.git" isn't actually dangerous, and it's possible that somebody has manually given such a funny name. b. Since we'll eventually use this checking logic in fsck to prevent downstream repositories, it should be consistent across platforms. Because verify_path() relies on is_dir_sep(), it wouldn't block "foo\..\bar" on a non-Windows machine. 2. Where should we enforce it? These days most of the .gitmodules reads go through submodule-config.c, so I've put it there in the reading step. That should cover all of the C code. We also construct the name for "git submodule add" inside the git-submodule.sh script. This is probably not a big deal for security since the name is coming from the user anyway, but it would be polite to remind them if the name they pick is invalid (and we need to expose the name-checker to the shell anyway for our test scripts). This patch issues a warning when reading .gitmodules and just ignores the related config entry completely. This will generally end up producing a sensible error, as it works the same as a .gitmodules file which is missing a submodule entry (so "submodule update" will barf, but "git clone --recurse-submodules" will print an error but not abort the clone. There is one minor oddity, which is that we print the warning once per malformed config key (since that's how the config subsystem gives us the entries). So in the new test, for example, the user would see three warnings. That's OK, since the intent is that this case should never come up outside of malicious repositories (and then it might even benefit the user to see the message multiple times). Credit for finding this vulnerability and the proof of concept from which the test script was adapted goes to Etienne Stalmans. Signed-off-by: Jeff King <peff@peff.net>
2018-04-30 07:25:25 +00:00
int check_submodule_name(const char *name)
{
/* Disallow empty names */
if (!*name)
return -1;
/*
dir API: add a generalized path_match_flags() function Add a path_match_flags() function and have the two sets of starts_with_dot_{,dot_}slash() functions added in 63e95beb085 (submodule: port resolve_relative_url from shell to C, 2016-04-15) and a2b26ffb1a8 (fsck: convert gitmodules url to URL passed to curl, 2020-04-18) be thin wrappers for it. As the latter of those notes the fsck version was copied from the initial builtin/submodule--helper.c version. Since the code added in a2b26ffb1a8 was doing really doing the same as win32_is_dir_sep() added in 1cadad6f658 (git clone <url> C:\cygwin\home\USER\repo' is working (again), 2018-12-15) let's move the latter to git-compat-util.h is a is_xplatform_dir_sep(). We can then call either it or the platform-specific is_dir_sep() from this new function. Let's likewise change code in various other places that was hardcoding checks for "'/' || '\\'" with the new is_xplatform_dir_sep(). As can be seen in those callers some of them still concern themselves with ':' (Mac OS classic?), but let's leave the question of whether that should be consolidated for some other time. As we expect to make wider use of the "native" case in the future, define and use two starts_with_dot_{,dot_}slash_native() convenience wrappers. This makes the diff in builtin/submodule--helper.c much smaller. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-05-16 20:10:59 +00:00
* Look for '..' as a path component. Check is_xplatform_dir_sep() as
submodule-config: verify submodule names as paths Submodule "names" come from the untrusted .gitmodules file, but we blindly append them to $GIT_DIR/modules to create our on-disk repo paths. This means you can do bad things by putting "../" into the name (among other things). Let's sanity-check these names to avoid building a path that can be exploited. There are two main decisions: 1. What should the allowed syntax be? It's tempting to reuse verify_path(), since submodule names typically come from in-repo paths. But there are two reasons not to: a. It's technically more strict than what we need, as we really care only about breaking out of the $GIT_DIR/modules/ hierarchy. E.g., having a submodule named "foo/.git" isn't actually dangerous, and it's possible that somebody has manually given such a funny name. b. Since we'll eventually use this checking logic in fsck to prevent downstream repositories, it should be consistent across platforms. Because verify_path() relies on is_dir_sep(), it wouldn't block "foo\..\bar" on a non-Windows machine. 2. Where should we enforce it? These days most of the .gitmodules reads go through submodule-config.c, so I've put it there in the reading step. That should cover all of the C code. We also construct the name for "git submodule add" inside the git-submodule.sh script. This is probably not a big deal for security since the name is coming from the user anyway, but it would be polite to remind them if the name they pick is invalid (and we need to expose the name-checker to the shell anyway for our test scripts). This patch issues a warning when reading .gitmodules and just ignores the related config entry completely. This will generally end up producing a sensible error, as it works the same as a .gitmodules file which is missing a submodule entry (so "submodule update" will barf, but "git clone --recurse-submodules" will print an error but not abort the clone. There is one minor oddity, which is that we print the warning once per malformed config key (since that's how the config subsystem gives us the entries). So in the new test, for example, the user would see three warnings. That's OK, since the intent is that this case should never come up outside of malicious repositories (and then it might even benefit the user to see the message multiple times). Credit for finding this vulnerability and the proof of concept from which the test script was adapted goes to Etienne Stalmans. Signed-off-by: Jeff King <peff@peff.net>
2018-04-30 07:25:25 +00:00
* separators rather than is_dir_sep(), because we want the name rules
* to be consistent across platforms.
*/
goto in_component; /* always start inside component */
while (*name) {
char c = *name++;
dir API: add a generalized path_match_flags() function Add a path_match_flags() function and have the two sets of starts_with_dot_{,dot_}slash() functions added in 63e95beb085 (submodule: port resolve_relative_url from shell to C, 2016-04-15) and a2b26ffb1a8 (fsck: convert gitmodules url to URL passed to curl, 2020-04-18) be thin wrappers for it. As the latter of those notes the fsck version was copied from the initial builtin/submodule--helper.c version. Since the code added in a2b26ffb1a8 was doing really doing the same as win32_is_dir_sep() added in 1cadad6f658 (git clone <url> C:\cygwin\home\USER\repo' is working (again), 2018-12-15) let's move the latter to git-compat-util.h is a is_xplatform_dir_sep(). We can then call either it or the platform-specific is_dir_sep() from this new function. Let's likewise change code in various other places that was hardcoding checks for "'/' || '\\'" with the new is_xplatform_dir_sep(). As can be seen in those callers some of them still concern themselves with ':' (Mac OS classic?), but let's leave the question of whether that should be consolidated for some other time. As we expect to make wider use of the "native" case in the future, define and use two starts_with_dot_{,dot_}slash_native() convenience wrappers. This makes the diff in builtin/submodule--helper.c much smaller. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-05-16 20:10:59 +00:00
if (is_xplatform_dir_sep(c)) {
submodule-config: verify submodule names as paths Submodule "names" come from the untrusted .gitmodules file, but we blindly append them to $GIT_DIR/modules to create our on-disk repo paths. This means you can do bad things by putting "../" into the name (among other things). Let's sanity-check these names to avoid building a path that can be exploited. There are two main decisions: 1. What should the allowed syntax be? It's tempting to reuse verify_path(), since submodule names typically come from in-repo paths. But there are two reasons not to: a. It's technically more strict than what we need, as we really care only about breaking out of the $GIT_DIR/modules/ hierarchy. E.g., having a submodule named "foo/.git" isn't actually dangerous, and it's possible that somebody has manually given such a funny name. b. Since we'll eventually use this checking logic in fsck to prevent downstream repositories, it should be consistent across platforms. Because verify_path() relies on is_dir_sep(), it wouldn't block "foo\..\bar" on a non-Windows machine. 2. Where should we enforce it? These days most of the .gitmodules reads go through submodule-config.c, so I've put it there in the reading step. That should cover all of the C code. We also construct the name for "git submodule add" inside the git-submodule.sh script. This is probably not a big deal for security since the name is coming from the user anyway, but it would be polite to remind them if the name they pick is invalid (and we need to expose the name-checker to the shell anyway for our test scripts). This patch issues a warning when reading .gitmodules and just ignores the related config entry completely. This will generally end up producing a sensible error, as it works the same as a .gitmodules file which is missing a submodule entry (so "submodule update" will barf, but "git clone --recurse-submodules" will print an error but not abort the clone. There is one minor oddity, which is that we print the warning once per malformed config key (since that's how the config subsystem gives us the entries). So in the new test, for example, the user would see three warnings. That's OK, since the intent is that this case should never come up outside of malicious repositories (and then it might even benefit the user to see the message multiple times). Credit for finding this vulnerability and the proof of concept from which the test script was adapted goes to Etienne Stalmans. Signed-off-by: Jeff King <peff@peff.net>
2018-04-30 07:25:25 +00:00
in_component:
if (name[0] == '.' && name[1] == '.' &&
dir API: add a generalized path_match_flags() function Add a path_match_flags() function and have the two sets of starts_with_dot_{,dot_}slash() functions added in 63e95beb085 (submodule: port resolve_relative_url from shell to C, 2016-04-15) and a2b26ffb1a8 (fsck: convert gitmodules url to URL passed to curl, 2020-04-18) be thin wrappers for it. As the latter of those notes the fsck version was copied from the initial builtin/submodule--helper.c version. Since the code added in a2b26ffb1a8 was doing really doing the same as win32_is_dir_sep() added in 1cadad6f658 (git clone <url> C:\cygwin\home\USER\repo' is working (again), 2018-12-15) let's move the latter to git-compat-util.h is a is_xplatform_dir_sep(). We can then call either it or the platform-specific is_dir_sep() from this new function. Let's likewise change code in various other places that was hardcoding checks for "'/' || '\\'" with the new is_xplatform_dir_sep(). As can be seen in those callers some of them still concern themselves with ':' (Mac OS classic?), but let's leave the question of whether that should be consolidated for some other time. As we expect to make wider use of the "native" case in the future, define and use two starts_with_dot_{,dot_}slash_native() convenience wrappers. This makes the diff in builtin/submodule--helper.c much smaller. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-05-16 20:10:59 +00:00
(!name[2] || is_xplatform_dir_sep(name[2])))
submodule-config: verify submodule names as paths Submodule "names" come from the untrusted .gitmodules file, but we blindly append them to $GIT_DIR/modules to create our on-disk repo paths. This means you can do bad things by putting "../" into the name (among other things). Let's sanity-check these names to avoid building a path that can be exploited. There are two main decisions: 1. What should the allowed syntax be? It's tempting to reuse verify_path(), since submodule names typically come from in-repo paths. But there are two reasons not to: a. It's technically more strict than what we need, as we really care only about breaking out of the $GIT_DIR/modules/ hierarchy. E.g., having a submodule named "foo/.git" isn't actually dangerous, and it's possible that somebody has manually given such a funny name. b. Since we'll eventually use this checking logic in fsck to prevent downstream repositories, it should be consistent across platforms. Because verify_path() relies on is_dir_sep(), it wouldn't block "foo\..\bar" on a non-Windows machine. 2. Where should we enforce it? These days most of the .gitmodules reads go through submodule-config.c, so I've put it there in the reading step. That should cover all of the C code. We also construct the name for "git submodule add" inside the git-submodule.sh script. This is probably not a big deal for security since the name is coming from the user anyway, but it would be polite to remind them if the name they pick is invalid (and we need to expose the name-checker to the shell anyway for our test scripts). This patch issues a warning when reading .gitmodules and just ignores the related config entry completely. This will generally end up producing a sensible error, as it works the same as a .gitmodules file which is missing a submodule entry (so "submodule update" will barf, but "git clone --recurse-submodules" will print an error but not abort the clone. There is one minor oddity, which is that we print the warning once per malformed config key (since that's how the config subsystem gives us the entries). So in the new test, for example, the user would see three warnings. That's OK, since the intent is that this case should never come up outside of malicious repositories (and then it might even benefit the user to see the message multiple times). Credit for finding this vulnerability and the proof of concept from which the test script was adapted goes to Etienne Stalmans. Signed-off-by: Jeff King <peff@peff.net>
2018-04-30 07:25:25 +00:00
return -1;
}
}
return 0;
}
static int starts_with_dot_slash(const char *const path)
{
return path_match_flags(path, PATH_MATCH_STARTS_WITH_DOT_SLASH |
PATH_MATCH_XPLATFORM);
}
static int starts_with_dot_dot_slash(const char *const path)
{
return path_match_flags(path, PATH_MATCH_STARTS_WITH_DOT_DOT_SLASH |
PATH_MATCH_XPLATFORM);
}
static int submodule_url_is_relative(const char *url)
{
return starts_with_dot_slash(url) || starts_with_dot_dot_slash(url);
}
/*
* Count directory components that a relative submodule URL should chop
* from the remote_url it is to be resolved against.
*
* In other words, this counts "../" components at the start of a
* submodule URL.
*
* Returns the number of directory components to chop and writes a
* pointer to the next character of url after all leading "./" and
* "../" components to out.
*/
static int count_leading_dotdots(const char *url, const char **out)
{
int result = 0;
while (1) {
if (starts_with_dot_dot_slash(url)) {
result++;
url += strlen("../");
continue;
}
if (starts_with_dot_slash(url)) {
url += strlen("./");
continue;
}
*out = url;
return result;
}
}
/*
* Check whether a transport is implemented by git-remote-curl.
*
* If it is, returns 1 and writes the URL that would be passed to
* git-remote-curl to the "out" parameter.
*
* Otherwise, returns 0 and leaves "out" untouched.
*
* Examples:
* http::https://example.com/repo.git -> 1, https://example.com/repo.git
* https://example.com/repo.git -> 1, https://example.com/repo.git
* git://example.com/repo.git -> 0
*
* This is for use in checking for previously exploitable bugs that
* required a submodule URL to be passed to git-remote-curl.
*/
static int url_to_curl_url(const char *url, const char **out)
{
/*
* We don't need to check for case-aliases, "http.exe", and so
* on because in the default configuration, is_transport_allowed
* prevents URLs with those schemes from being cloned
* automatically.
*/
if (skip_prefix(url, "http::", out) ||
skip_prefix(url, "https::", out) ||
skip_prefix(url, "ftp::", out) ||
skip_prefix(url, "ftps::", out))
return 1;
if (starts_with(url, "http://") ||
starts_with(url, "https://") ||
starts_with(url, "ftp://") ||
starts_with(url, "ftps://")) {
*out = url;
return 1;
}
return 0;
}
int check_submodule_url(const char *url)
{
const char *curl_url;
if (looks_like_command_line_option(url))
return -1;
if (submodule_url_is_relative(url) || starts_with(url, "git://")) {
char *decoded;
const char *next;
int has_nl;
/*
* This could be appended to an http URL and url-decoded;
* check for malicious characters.
*/
decoded = url_decode(url);
has_nl = !!strchr(decoded, '\n');
free(decoded);
if (has_nl)
return -1;
/*
* URLs which escape their root via "../" can overwrite
* the host field and previous components, resolving to
* URLs like https::example.com/submodule.git and
* https:///example.com/submodule.git that were
* susceptible to CVE-2020-11008.
*/
if (count_leading_dotdots(url, &next) > 0 &&
(*next == ':' || *next == '/'))
return -1;
}
else if (url_to_curl_url(url, &curl_url)) {
int ret = 0;
char *normalized = url_normalize(curl_url, NULL);
if (normalized) {
char *decoded = url_decode(normalized);
if (strchr(decoded, '\n'))
ret = -1;
free(normalized);
free(decoded);
} else {
ret = -1;
}
return ret;
}
return 0;
}
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
static int name_and_item_from_var(const char *var, struct strbuf *name,
struct strbuf *item)
{
const char *subsection, *key;
size_t subsection_len;
int parse;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
parse = parse_config_key(var, "submodule", &subsection,
&subsection_len, &key);
if (parse < 0 || !subsection)
return 0;
strbuf_add(name, subsection, subsection_len);
submodule-config: verify submodule names as paths Submodule "names" come from the untrusted .gitmodules file, but we blindly append them to $GIT_DIR/modules to create our on-disk repo paths. This means you can do bad things by putting "../" into the name (among other things). Let's sanity-check these names to avoid building a path that can be exploited. There are two main decisions: 1. What should the allowed syntax be? It's tempting to reuse verify_path(), since submodule names typically come from in-repo paths. But there are two reasons not to: a. It's technically more strict than what we need, as we really care only about breaking out of the $GIT_DIR/modules/ hierarchy. E.g., having a submodule named "foo/.git" isn't actually dangerous, and it's possible that somebody has manually given such a funny name. b. Since we'll eventually use this checking logic in fsck to prevent downstream repositories, it should be consistent across platforms. Because verify_path() relies on is_dir_sep(), it wouldn't block "foo\..\bar" on a non-Windows machine. 2. Where should we enforce it? These days most of the .gitmodules reads go through submodule-config.c, so I've put it there in the reading step. That should cover all of the C code. We also construct the name for "git submodule add" inside the git-submodule.sh script. This is probably not a big deal for security since the name is coming from the user anyway, but it would be polite to remind them if the name they pick is invalid (and we need to expose the name-checker to the shell anyway for our test scripts). This patch issues a warning when reading .gitmodules and just ignores the related config entry completely. This will generally end up producing a sensible error, as it works the same as a .gitmodules file which is missing a submodule entry (so "submodule update" will barf, but "git clone --recurse-submodules" will print an error but not abort the clone. There is one minor oddity, which is that we print the warning once per malformed config key (since that's how the config subsystem gives us the entries). So in the new test, for example, the user would see three warnings. That's OK, since the intent is that this case should never come up outside of malicious repositories (and then it might even benefit the user to see the message multiple times). Credit for finding this vulnerability and the proof of concept from which the test script was adapted goes to Etienne Stalmans. Signed-off-by: Jeff King <peff@peff.net>
2018-04-30 07:25:25 +00:00
if (check_submodule_name(name->buf) < 0) {
warning(_("ignoring suspicious submodule name: %s"), name->buf);
strbuf_release(name);
return 0;
}
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
strbuf_addstr(item, key);
return 1;
}
static struct submodule *lookup_or_create_by_name(struct submodule_cache *cache,
const struct object_id *gitmodules_oid, const char *name)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
struct submodule *submodule;
struct strbuf name_buf = STRBUF_INIT;
submodule = cache_lookup_name(cache, gitmodules_oid, name);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
if (submodule)
return submodule;
submodule = xmalloc(sizeof(*submodule));
strbuf_addstr(&name_buf, name);
submodule->name = strbuf_detach(&name_buf, NULL);
submodule->path = NULL;
submodule->url = NULL;
submodule->update_strategy.type = SM_UPDATE_UNSPECIFIED;
submodule->update_strategy.command = NULL;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
submodule->fetch_recurse = RECURSE_SUBMODULES_NONE;
submodule->ignore = NULL;
submodule->branch = NULL;
submodule->recommend_shallow = -1;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
oidcpy(&submodule->gitmodules_oid, gitmodules_oid);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
cache_add(cache, submodule);
return submodule;
}
static int parse_fetch_recurse(const char *opt, const char *arg,
int die_on_error)
{
switch (git_parse_maybe_bool(arg)) {
case 1:
return RECURSE_SUBMODULES_ON;
case 0:
return RECURSE_SUBMODULES_OFF;
default:
if (!strcmp(arg, "on-demand"))
return RECURSE_SUBMODULES_ON_DEMAND;
/*
* Please update $__git_fetch_recurse_submodules in
* git-completion.bash when you add new options.
*/
if (die_on_error)
die("bad %s argument: %s", opt, arg);
else
return RECURSE_SUBMODULES_ERROR;
}
}
int parse_submodule_fetchjobs(const char *var, const char *value,
const struct key_value_info *kvi)
{
int fetchjobs = git_config_int(var, value, kvi);
if (fetchjobs < 0)
die(_("negative values not allowed for submodule.fetchJobs"));
if (!fetchjobs)
fetchjobs = online_cpus();
return fetchjobs;
}
int parse_fetch_recurse_submodules_arg(const char *opt, const char *arg)
{
return parse_fetch_recurse(opt, arg, 1);
}
int option_fetch_parse_recurse_submodules(const struct option *opt,
const char *arg, int unset)
{
int *v;
if (!opt->value)
return -1;
v = opt->value;
if (unset) {
*v = RECURSE_SUBMODULES_OFF;
} else {
if (arg)
*v = parse_fetch_recurse_submodules_arg(opt->long_name, arg);
else
*v = RECURSE_SUBMODULES_ON;
}
return 0;
}
static int parse_update_recurse(const char *opt, const char *arg,
int die_on_error)
{
switch (git_parse_maybe_bool(arg)) {
case 1:
return RECURSE_SUBMODULES_ON;
case 0:
return RECURSE_SUBMODULES_OFF;
default:
if (die_on_error)
die("bad %s argument: %s", opt, arg);
return RECURSE_SUBMODULES_ERROR;
}
}
int parse_update_recurse_submodules_arg(const char *opt, const char *arg)
{
return parse_update_recurse(opt, arg, 1);
}
static int parse_push_recurse(const char *opt, const char *arg,
int die_on_error)
{
switch (git_parse_maybe_bool(arg)) {
case 1:
/* There's no simple "on" value when pushing */
if (die_on_error)
die("bad %s argument: %s", opt, arg);
else
return RECURSE_SUBMODULES_ERROR;
case 0:
return RECURSE_SUBMODULES_OFF;
default:
if (!strcmp(arg, "on-demand"))
return RECURSE_SUBMODULES_ON_DEMAND;
else if (!strcmp(arg, "check"))
return RECURSE_SUBMODULES_CHECK;
else if (!strcmp(arg, "only"))
return RECURSE_SUBMODULES_ONLY;
/*
* Please update $__git_push_recurse_submodules in
* git-completion.bash when you add new modes.
*/
else if (die_on_error)
die("bad %s argument: %s", opt, arg);
else
return RECURSE_SUBMODULES_ERROR;
}
}
int parse_push_recurse_submodules_arg(const char *opt, const char *arg)
{
return parse_push_recurse(opt, arg, 1);
}
static void warn_multiple_config(const struct object_id *treeish_name,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
const char *name, const char *option)
{
const char *commit_string = "WORKTREE";
if (treeish_name)
commit_string = oid_to_hex(treeish_name);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
warning("%s:.gitmodules, multiple configurations found for "
"'submodule.%s.%s'. Skipping second one!",
commit_string, name, option);
}
submodule-config: ban submodule urls that start with dash The previous commit taught the submodule code to invoke our "git clone $url $path" with a "--" separator so that we aren't confused by urls or paths that start with dashes. However, that's just one code path. It's not clear if there are others, and it would be an easy mistake to add one in the future. Moreover, even with the fix in the previous commit, it's quite hard to actually do anything useful with such an entry. Any url starting with a dash must fall into one of three categories: - it's meant as a file url, like "-path". But then any clone is not going to have the matching path, since it's by definition relative inside the newly created clone. If you spell it as "./-path", the submodule code sees the "/" and translates this to an absolute path, so it at least works (assuming the receiver has the same filesystem layout as you). But that trick does not apply for a bare "-path". - it's meant as an ssh url, like "-host:path". But this already doesn't work, as we explicitly disallow ssh hostnames that begin with a dash (to avoid option injection against ssh). - it's a remote-helper scheme, like "-scheme::data". This _could_ work if the receiver bends over backwards and creates a funny-named helper like "git-remote--scheme". But normally there would not be any helper that matches. Since such a url does not work today and is not likely to do anything useful in the future, let's simply disallow them entirely. That protects the existing "git clone" path (in a belt-and-suspenders way), along with any others that might exist. Our tests cover two cases: 1. A file url with "./" continues to work, showing that there's an escape hatch for people with truly silly repo names. 2. A url starting with "-" is rejected. Note that we expect case (2) to fail, but it would have done so even without this commit, for the reasons given above. So instead of just expecting failure, let's also check for the magic word "ignoring" on stderr. That lets us know that we failed for the right reason. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-24 08:36:30 +00:00
static void warn_command_line_option(const char *var, const char *value)
{
warning(_("ignoring '%s' which may be interpreted as"
" a command-line option: %s"), var, value);
}
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
struct parse_config_parameter {
struct submodule_cache *cache;
const struct object_id *treeish_name;
const struct object_id *gitmodules_oid;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
int overwrite;
};
submodule: reject submodule.update = !command in .gitmodules Since ac1fbbda2013 (submodule: do not copy unknown update mode from .gitmodules, 2013-12-02), Git has been careful to avoid copying [submodule "foo"] update = !run an arbitrary scary command from .gitmodules to a repository's local config, copying in the setting 'update = none' instead. The gitmodules(5) manpage documents the intention: The !command form is intentionally ignored here for security reasons Unfortunately, starting with v2.20.0-rc0 (which integrated ee69b2a9 (submodule--helper: introduce new update-module-mode helper, 2018-08-13, first released in v2.20.0-rc0)), there are scenarios where we *don't* ignore it: if the config store contains no submodule.foo.update setting, the submodule-config API falls back to reading .gitmodules and the repository-supplied !command gets run after all. This was part of a general change over time in submodule support to read more directly from .gitmodules, since unlike .git/config it allows a project to change values between branches and over time (while still allowing .git/config to override things). But it was never intended to apply to this kind of dangerous configuration. The behavior change was not advertised in ee69b2a9's commit message and was missed in review. Let's take the opportunity to make the protection more robust, even in Git versions that are technically not affected: instead of quietly converting 'update = !command' to 'update = none', noisily treat it as an error. Allowing the setting but treating it as meaning something else was just confusing; users are better served by seeing the error sooner. Forbidding the construct makes the semantics simpler and means we can check for it in fsck (in a separate patch). As a result, the submodule-config API cannot read this value from .gitmodules under any circumstance, and we can declare with confidence For security reasons, the '!command' form is not accepted here. Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2019-12-05 09:28:28 +00:00
/*
* Parse a config item from .gitmodules.
*
* This does not handle submodule-related configuration from the main
* config store (.git/config, etc). Callers are responsible for
* checking for overrides in the main config store when appropriate.
*/
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-28 19:26:22 +00:00
static int parse_config(const char *var, const char *value,
const struct config_context *ctx UNUSED, void *data)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
struct parse_config_parameter *me = data;
struct submodule *submodule;
struct strbuf name = STRBUF_INIT, item = STRBUF_INIT;
int ret = 0;
/* this also ensures that we only parse submodule entries */
if (!name_and_item_from_var(var, &name, &item))
return 0;
submodule = lookup_or_create_by_name(me->cache,
me->gitmodules_oid,
name.buf);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
if (!strcmp(item.buf, "path")) {
if (!value)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
ret = config_error_nonbool(var);
submodule-config: ban submodule paths that start with a dash We recently banned submodule urls that look like command-line options. This is the matching change to ban leading-dash paths. As with the urls, this should not break any use cases that currently work. Even with our "--" separator passed to git-clone, git-submodule.sh gets confused. Without the code portion of this patch, the clone of "-sub" added in t7417 would yield results like: /path/to/git-submodule: 410: cd: Illegal option -s /path/to/git-submodule: 417: cd: Illegal option -s /path/to/git-submodule: 410: cd: Illegal option -s /path/to/git-submodule: 417: cd: Illegal option -s Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed. Moreover, naively adding such a submodule doesn't work: $ git submodule add $url -sub The following path is ignored by one of your .gitignore files: -sub even though there is no such ignore pattern (the test script hacks around this with a well-placed "git mv"). Unlike leading-dash urls, though, it's possible that such a path _could_ be useful if we eventually made it work. So this commit should be seen not as recommending a particular policy, but rather temporarily closing off a broken and possibly dangerous code-path. We may revisit this decision later. There are two minor differences to the tests in t7416 (that covered urls): 1. We don't have a "./-sub" escape hatch to make this work, since the submodule code expects to be able to match canonical index names to the path field (so you are free to add submodule config with that path, but we would never actually use it, since an index entry would never start with "./"). 2. After this patch, cloning actually succeeds. Since we ignore the submodule.*.path value, we fail to find a config stanza for our submodule at all, and simply treat it as inactive. We still check for the "ignoring" message. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-24 08:39:55 +00:00
else if (looks_like_command_line_option(value))
warn_command_line_option(var, value);
else if (!me->overwrite && submodule->path)
warn_multiple_config(me->treeish_name, submodule->name,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
"path");
else {
if (submodule->path)
cache_remove_path(me->cache, submodule);
free((void *) submodule->path);
submodule->path = xstrdup(value);
cache_put_path(me->cache, submodule);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
} else if (!strcmp(item.buf, "fetchrecursesubmodules")) {
/* when parsing worktree configurations we can die early */
int die_on_error = is_null_oid(me->gitmodules_oid);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
if (!me->overwrite &&
submodule->fetch_recurse != RECURSE_SUBMODULES_NONE)
warn_multiple_config(me->treeish_name, submodule->name,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
"fetchrecursesubmodules");
else
submodule->fetch_recurse = parse_fetch_recurse(
var, value,
die_on_error);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
} else if (!strcmp(item.buf, "ignore")) {
if (!value)
ret = config_error_nonbool(var);
else if (!me->overwrite && submodule->ignore)
warn_multiple_config(me->treeish_name, submodule->name,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
"ignore");
else if (strcmp(value, "untracked") &&
strcmp(value, "dirty") &&
strcmp(value, "all") &&
strcmp(value, "none"))
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
warning("Invalid parameter '%s' for config option "
"'submodule.%s.ignore'", value, name.buf);
else {
free((void *) submodule->ignore);
submodule->ignore = xstrdup(value);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
} else if (!strcmp(item.buf, "url")) {
if (!value) {
ret = config_error_nonbool(var);
submodule-config: ban submodule urls that start with dash The previous commit taught the submodule code to invoke our "git clone $url $path" with a "--" separator so that we aren't confused by urls or paths that start with dashes. However, that's just one code path. It's not clear if there are others, and it would be an easy mistake to add one in the future. Moreover, even with the fix in the previous commit, it's quite hard to actually do anything useful with such an entry. Any url starting with a dash must fall into one of three categories: - it's meant as a file url, like "-path". But then any clone is not going to have the matching path, since it's by definition relative inside the newly created clone. If you spell it as "./-path", the submodule code sees the "/" and translates this to an absolute path, so it at least works (assuming the receiver has the same filesystem layout as you). But that trick does not apply for a bare "-path". - it's meant as an ssh url, like "-host:path". But this already doesn't work, as we explicitly disallow ssh hostnames that begin with a dash (to avoid option injection against ssh). - it's a remote-helper scheme, like "-scheme::data". This _could_ work if the receiver bends over backwards and creates a funny-named helper like "git-remote--scheme". But normally there would not be any helper that matches. Since such a url does not work today and is not likely to do anything useful in the future, let's simply disallow them entirely. That protects the existing "git clone" path (in a belt-and-suspenders way), along with any others that might exist. Our tests cover two cases: 1. A file url with "./" continues to work, showing that there's an escape hatch for people with truly silly repo names. 2. A url starting with "-" is rejected. Note that we expect case (2) to fail, but it would have done so even without this commit, for the reasons given above. So instead of just expecting failure, let's also check for the magic word "ignoring" on stderr. That lets us know that we failed for the right reason. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-24 08:36:30 +00:00
} else if (looks_like_command_line_option(value)) {
warn_command_line_option(var, value);
} else if (!me->overwrite && submodule->url) {
warn_multiple_config(me->treeish_name, submodule->name,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
"url");
} else {
free((void *) submodule->url);
submodule->url = xstrdup(value);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
} else if (!strcmp(item.buf, "update")) {
if (!value)
ret = config_error_nonbool(var);
else if (!me->overwrite &&
submodule->update_strategy.type != SM_UPDATE_UNSPECIFIED)
warn_multiple_config(me->treeish_name, submodule->name,
"update");
else if (parse_submodule_update_strategy(value,
submodule: reject submodule.update = !command in .gitmodules Since ac1fbbda2013 (submodule: do not copy unknown update mode from .gitmodules, 2013-12-02), Git has been careful to avoid copying [submodule "foo"] update = !run an arbitrary scary command from .gitmodules to a repository's local config, copying in the setting 'update = none' instead. The gitmodules(5) manpage documents the intention: The !command form is intentionally ignored here for security reasons Unfortunately, starting with v2.20.0-rc0 (which integrated ee69b2a9 (submodule--helper: introduce new update-module-mode helper, 2018-08-13, first released in v2.20.0-rc0)), there are scenarios where we *don't* ignore it: if the config store contains no submodule.foo.update setting, the submodule-config API falls back to reading .gitmodules and the repository-supplied !command gets run after all. This was part of a general change over time in submodule support to read more directly from .gitmodules, since unlike .git/config it allows a project to change values between branches and over time (while still allowing .git/config to override things). But it was never intended to apply to this kind of dangerous configuration. The behavior change was not advertised in ee69b2a9's commit message and was missed in review. Let's take the opportunity to make the protection more robust, even in Git versions that are technically not affected: instead of quietly converting 'update = !command' to 'update = none', noisily treat it as an error. Allowing the setting but treating it as meaning something else was just confusing; users are better served by seeing the error sooner. Forbidding the construct makes the semantics simpler and means we can check for it in fsck (in a separate patch). As a result, the submodule-config API cannot read this value from .gitmodules under any circumstance, and we can declare with confidence For security reasons, the '!command' form is not accepted here. Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
2019-12-05 09:28:28 +00:00
&submodule->update_strategy) < 0 ||
submodule->update_strategy.type == SM_UPDATE_COMMAND)
die(_("invalid value for '%s'"), var);
} else if (!strcmp(item.buf, "shallow")) {
if (!me->overwrite && submodule->recommend_shallow != -1)
warn_multiple_config(me->treeish_name, submodule->name,
"shallow");
else
submodule->recommend_shallow =
git_config_bool(var, value);
} else if (!strcmp(item.buf, "branch")) {
if (!value)
ret = config_error_nonbool(var);
else if (!me->overwrite && submodule->branch)
warn_multiple_config(me->treeish_name, submodule->name,
"branch");
else {
free((void *)submodule->branch);
submodule->branch = xstrdup(value);
}
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
strbuf_release(&name);
strbuf_release(&item);
return ret;
}
static int gitmodule_oid_from_commit(const struct object_id *treeish_name,
struct object_id *gitmodules_oid,
struct strbuf *rev)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
int ret = 0;
if (is_null_oid(treeish_name)) {
oidclr(gitmodules_oid);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
return 1;
}
strbuf_addf(rev, "%s:.gitmodules", oid_to_hex(treeish_name));
if (repo_get_oid(the_repository, rev->buf, gitmodules_oid) >= 0)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
ret = 1;
return ret;
}
/* This does a lookup of a submodule configuration by name or by path
* (key) with on-demand reading of the appropriate .gitmodules from
* revisions.
*/
static const struct submodule *config_from(struct submodule_cache *cache,
const struct object_id *treeish_name, const char *key,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
enum lookup_type lookup_type)
{
struct strbuf rev = STRBUF_INIT;
unsigned long config_size;
char *config = NULL;
struct object_id oid;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
enum object_type type;
const struct submodule *submodule = NULL;
struct parse_config_parameter parameter;
/*
* If any parameter except the cache is a NULL pointer just
* return the first submodule. Can be used to check whether
* there are any submodules parsed.
*/
if (!treeish_name || !key) {
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
struct hashmap_iter iter;
struct submodule_entry *entry;
entry = hashmap_iter_first_entry(&cache->for_name, &iter,
struct submodule_entry,
ent /* member name */);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
if (!entry)
return NULL;
return entry->config;
}
if (!gitmodule_oid_from_commit(treeish_name, &oid, &rev))
goto out;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
switch (lookup_type) {
case lookup_name:
submodule = cache_lookup_name(cache, &oid, key);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
break;
case lookup_path:
submodule = cache_lookup_path(cache, &oid, key);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
break;
}
if (submodule)
goto out;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
config = repo_read_object_file(the_repository, &oid, &type,
&config_size);
if (!config || type != OBJ_BLOB)
goto out;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
/* fill the submodule config into the cache */
parameter.cache = cache;
parameter.treeish_name = treeish_name;
parameter.gitmodules_oid = &oid;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
parameter.overwrite = 0;
git_config_from_mem(parse_config, CONFIG_ORIGIN_SUBMODULE_BLOB, rev.buf,
config, config_size, &parameter, CONFIG_SCOPE_UNKNOWN, NULL);
strbuf_release(&rev);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
free(config);
switch (lookup_type) {
case lookup_name:
return cache_lookup_name(cache, &oid, key);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
case lookup_path:
return cache_lookup_path(cache, &oid, key);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
default:
return NULL;
}
out:
strbuf_release(&rev);
free(config);
return submodule;
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
static void submodule_cache_check_init(struct repository *repo)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
{
if (repo->submodule_cache && repo->submodule_cache->initialized)
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
return;
if (!repo->submodule_cache)
repo->submodule_cache = submodule_cache_alloc();
submodule_cache_init(repo->submodule_cache);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
/*
* Note: This function is private for a reason, the '.gitmodules' file should
* not be used as a mechanism to retrieve arbitrary configuration stored in
* the repository.
*
* Runs the provided config function on the '.gitmodules' file found in the
* working directory.
*/
static void config_from_gitmodules(config_fn_t fn, struct repository *repo, void *data)
{
if (repo->worktree) {
struct git_config_source config_source = {
0, .scope = CONFIG_SCOPE_SUBMODULE
};
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
const struct config_options opts = { 0 };
struct object_id oid;
char *file;
char *oidstr = NULL;
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
file = repo_worktree_path(repo, GITMODULES_FILE);
if (file_exists(file)) {
config_source.file = file;
} else if (repo_get_oid(repo, GITMODULES_INDEX, &oid) >= 0 ||
repo_get_oid(repo, GITMODULES_HEAD, &oid) >= 0) {
config_source.blob = oidstr = xstrdup(oid_to_hex(&oid));
if (repo != the_repository)
add_submodule_odb_by_path(repo->objects->odb->path);
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
} else {
goto out;
}
config: pass 'repo' directly to 'config_with_options()' Add a 'struct repository' argument to 'config_with_options()' and remove the 'repo' field from 'struct git_config_source'. A 'struct repository' instance was originally added to the config source in e3e8bf046e9 (submodule-config: pass repo upon blob config read, 2021-08-16) to improve how submodule blob config content was accessed. At the time, this was the only use for a 'repository' instance, so it was naturally added only where it was needed: to 'struct git_config_source'. However, in upcoming patches, 'config_with_options()' will need the repository instance to access extension information (regardless of whether a 'config_source' exists). To make the 'struct repository' instance more easily accessible, move it into the function's arguments. Update all callers of 'config_with_options()' to pass the appropriate 'repo' value: * in 'builtin/config.c', use 'the_repository' * in 'submodule--config.c', use the 'repo' arg in 'config_from_gitmodules()' * in 'read_[very_]early_config()' & 'read_protected_config()', set 'repo' to NULL (repository instances aren't available there) * in 'populate_remote_urls()', use the repo instance that has been added to the 'struct config_include_data' * in 'repo_read_config()', use the given 'repo' arg Finally, note that this patch eliminates the fallback to 'the_repository' that previously existed for the 'config_source' repo instance if it was NULL. The fallback is no longer necessary, as the 'repo' is set explicitly in all cases where it is needed. Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-05-26 01:32:59 +00:00
config_with_options(fn, data, &config_source, repo, &opts);
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
out:
free(oidstr);
free(file);
}
}
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-28 19:26:22 +00:00
static int gitmodules_cb(const char *var, const char *value,
const struct config_context *ctx, void *data)
{
struct repository *repo = data;
struct parse_config_parameter parameter;
parameter.cache = repo->submodule_cache;
parameter.treeish_name = NULL;
parameter.gitmodules_oid = null_oid();
parameter.overwrite = 1;
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-28 19:26:22 +00:00
return parse_config(var, value, ctx, &parameter);
}
void repo_read_gitmodules(struct repository *repo, int skip_if_read)
{
submodule_cache_check_init(repo);
if (repo->submodule_cache->gitmodules_read && skip_if_read)
return;
if (repo_read_index(repo) < 0)
return;
if (!is_gitmodules_unmerged(repo->index))
config_from_gitmodules(gitmodules_cb, repo, repo);
repo->submodule_cache->gitmodules_read = 1;
}
void gitmodules_config_oid(const struct object_id *commit_oid)
{
struct strbuf rev = STRBUF_INIT;
struct object_id oid;
submodule_cache_check_init(the_repository);
if (gitmodule_oid_from_commit(commit_oid, &oid, &rev)) {
git_config_from_blob_oid(gitmodules_cb, rev.buf,
the_repository, &oid, the_repository,
CONFIG_SCOPE_UNKNOWN);
}
strbuf_release(&rev);
the_repository->submodule_cache->gitmodules_read = 1;
}
const struct submodule *submodule_from_name(struct repository *r,
const struct object_id *treeish_name,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
const char *name)
{
repo_read_gitmodules(r, 1);
return config_from(r->submodule_cache, treeish_name, name, lookup_name);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
const struct submodule *submodule_from_path(struct repository *r,
const struct object_id *treeish_name,
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
const char *path)
{
repo_read_gitmodules(r, 1);
return config_from(r->submodule_cache, treeish_name, path, lookup_path);
}
branch: add --recurse-submodules option for branch creation To improve the submodules UX, we would like to teach Git to handle branches in submodules. Start this process by teaching "git branch" the --recurse-submodules option so that "git branch --recurse-submodules topic" will create the `topic` branch in the superproject and its submodules. Although this commit does not introduce breaking changes, it does not work well with existing --recurse-submodules commands because "git branch --recurse-submodules" writes to the submodule ref store, but most commands only consider the superproject gitlink and ignore the submodule ref store. For example, "git checkout --recurse-submodules" will check out the commits in the superproject gitlinks (and put the submodules in detached HEAD) instead of checking out the submodule branches. Because of this, this commit introduces a new configuration value, `submodule.propagateBranches`. The plan is for Git commands to prioritize submodule ref store information over superproject gitlinks if this value is true. Because "git branch --recurse-submodules" writes to submodule ref stores, for the sake of clarity, it will not function unless this configuration value is set. This commit also includes changes that support working with submodules from a superproject commit because "branch --recurse-submodules" (and future commands) need to read .gitmodules and gitlinks from the superproject commit, but submodules are typically read from the filesystem's .gitmodules and the index's gitlinks. These changes are: * add a submodules_of_tree() helper that gives the relevant information of an in-tree submodule (e.g. path and oid) and initializes the repository * add is_tree_submodule_active() by adding a treeish_name parameter to is_submodule_active() * add the "submoduleNotUpdated" advice to advise users to update the submodules in their trees Incidentally, fix an incorrect usage string that combined the 'list' usage of git branch (-l) with the 'create' usage; this string has been incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use parse_options., 2007-10-07). Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-29 00:04:45 +00:00
/**
* Used internally by submodules_of_tree(). Recurses into 'treeish_name'
* and appends submodule entries to 'out'. The submodule_cache expects
* a root-level treeish_name and paths, so keep track of these values
* with 'root_tree' and 'prefix'.
*/
static void traverse_tree_submodules(struct repository *r,
const struct object_id *root_tree,
char *prefix,
const struct object_id *treeish_name,
struct submodule_entry_list *out)
{
struct tree_desc tree;
struct submodule_tree_entry *st_entry;
struct name_entry *name_entry;
char *tree_path = NULL;
name_entry = xmalloc(sizeof(*name_entry));
fill_tree_descriptor(r, &tree, treeish_name);
while (tree_entry(&tree, name_entry)) {
if (prefix)
tree_path =
mkpathdup("%s/%s", prefix, name_entry->path);
else
tree_path = xstrdup(name_entry->path);
if (S_ISGITLINK(name_entry->mode) &&
is_tree_submodule_active(r, root_tree, tree_path)) {
ALLOC_GROW(out->entries, out->entry_nr + 1,
out->entry_alloc);
st_entry = &out->entries[out->entry_nr++];
branch: add --recurse-submodules option for branch creation To improve the submodules UX, we would like to teach Git to handle branches in submodules. Start this process by teaching "git branch" the --recurse-submodules option so that "git branch --recurse-submodules topic" will create the `topic` branch in the superproject and its submodules. Although this commit does not introduce breaking changes, it does not work well with existing --recurse-submodules commands because "git branch --recurse-submodules" writes to the submodule ref store, but most commands only consider the superproject gitlink and ignore the submodule ref store. For example, "git checkout --recurse-submodules" will check out the commits in the superproject gitlinks (and put the submodules in detached HEAD) instead of checking out the submodule branches. Because of this, this commit introduces a new configuration value, `submodule.propagateBranches`. The plan is for Git commands to prioritize submodule ref store information over superproject gitlinks if this value is true. Because "git branch --recurse-submodules" writes to submodule ref stores, for the sake of clarity, it will not function unless this configuration value is set. This commit also includes changes that support working with submodules from a superproject commit because "branch --recurse-submodules" (and future commands) need to read .gitmodules and gitlinks from the superproject commit, but submodules are typically read from the filesystem's .gitmodules and the index's gitlinks. These changes are: * add a submodules_of_tree() helper that gives the relevant information of an in-tree submodule (e.g. path and oid) and initializes the repository * add is_tree_submodule_active() by adding a treeish_name parameter to is_submodule_active() * add the "submoduleNotUpdated" advice to advise users to update the submodules in their trees Incidentally, fix an incorrect usage string that combined the 'list' usage of git branch (-l) with the 'create' usage; this string has been incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use parse_options., 2007-10-07). Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-29 00:04:45 +00:00
st_entry->name_entry = xmalloc(sizeof(*st_entry->name_entry));
*st_entry->name_entry = *name_entry;
st_entry->submodule =
submodule_from_path(r, root_tree, tree_path);
st_entry->repo = xmalloc(sizeof(*st_entry->repo));
if (repo_submodule_init(st_entry->repo, r, tree_path,
root_tree))
FREE_AND_NULL(st_entry->repo);
} else if (S_ISDIR(name_entry->mode))
traverse_tree_submodules(r, root_tree, tree_path,
&name_entry->oid, out);
free(tree_path);
}
}
void submodules_of_tree(struct repository *r,
const struct object_id *treeish_name,
struct submodule_entry_list *out)
{
CALLOC_ARRAY(out->entries, 0);
out->entry_nr = 0;
out->entry_alloc = 0;
traverse_tree_submodules(r, treeish_name, NULL, treeish_name, out);
}
void submodule_free(struct repository *r)
{
if (r->submodule_cache)
submodule_cache_clear(r->submodule_cache);
submodule: implement a config API for lookup of .gitmodules values In a superproject some commands need to interact with submodules. They need to query values from the .gitmodules file either from the worktree of from certain revisions. At the moment this is quite hard since a caller would need to read the .gitmodules file from the history and then parse the values. We want to provide an API for this so we have one place to get values from .gitmodules from any revision (including the worktree). The API is realized as a cache which allows us to lazily read .gitmodules configurations by commit into a runtime cache which can then be used to easily lookup values from it. Currently only the values for path or name are stored but it can be extended for any value needed. It is expected that .gitmodules files do not change often between commits. Thats why we lookup the .gitmodules sha1 from a commit and then either lookup an already parsed configuration or parse and cache an unknown one for each sha1. The cache is lazily build on demand for each requested commit. This cache can be used for all purposes which need knowledge about submodule configurations. Example use cases are: * Recursive submodule checkout needs to lookup a submodule name from its path when a submodule first appears. This needs be done before this configuration exists in the worktree. * The implementation of submodule support for 'git archive' needs to lookup the submodule name to generate the archive when given a revision that is not checked out. * 'git fetch' when given the --recurse-submodules=on-demand option (or configuration) needs to lookup submodule names by path from the database rather than reading from the worktree. For new submodule it needs to lookup the name from its path to allow cloning new submodules into the .git folder so they can be checked out without any network interaction when the user does a checkout of that revision. Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-18 00:21:57 +00:00
}
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-28 19:26:22 +00:00
static int config_print_callback(const char *var, const char *value,
const struct config_context *ctx UNUSED,
void *cb_data)
{
char *wanted_key = cb_data;
if (!strcmp(wanted_key, var))
printf("%s\n", value);
return 0;
}
int print_config_from_gitmodules(struct repository *repo, const char *key)
{
int ret;
char *store_key;
ret = git_config_parse_key(key, &store_key, NULL);
if (ret < 0)
return CONFIG_INVALID_KEY;
config_from_gitmodules(config_print_callback, repo, store_key);
free(store_key);
return 0;
}
int config_set_in_gitmodules_file_gently(const char *key, const char *value)
{
int ret;
ret = git_config_set_in_file_gently(GITMODULES_FILE, key, NULL, value);
if (ret < 0)
/* Maybe the user already did that, don't error out here */
warning(_("Could not update .gitmodules entry %s"), key);
return ret;
}
struct fetch_config {
int *max_children;
int *recurse_submodules;
};
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-28 19:26:22 +00:00
static int gitmodules_fetch_config(const char *var, const char *value,
const struct config_context *ctx,
config: add ctx arg to config_fn_t Add a new "const struct config_context *ctx" arg to config_fn_t to hold additional information about the config iteration operation. config_context has a "struct key_value_info kvi" member that holds metadata about the config source being read (e.g. what kind of config source it is, the filename, etc). In this series, we're only interested in .kvi, so we could have just used "struct key_value_info" as an arg, but config_context makes it possible to add/adjust members in the future without changing the config_fn_t signature. We could also consider other ways of organizing the args (e.g. moving the config name and value into config_context or key_value_info), but in my experiments, the incremental benefit doesn't justify the added complexity (e.g. a config_fn_t will sometimes invoke another config_fn_t but with a different config value). In subsequent commits, the .kvi member will replace the global "struct config_reader" in config.c, making config iteration a global-free operation. It requires much more work for the machinery to provide meaningful values of .kvi, so for now, merely change the signature and call sites, pass NULL as a placeholder value, and don't rely on the arg in any meaningful way. Most of the changes are performed by contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every config_fn_t: - Modifies the signature to accept "const struct config_context *ctx" - Passes "ctx" to any inner config_fn_t, if needed - Adds UNUSED attributes to "ctx", if needed Most config_fn_t instances are easily identified by seeing if they are called by the various config functions. Most of the remaining ones are manually named in the .cocci patch. Manual cleanups are still needed, but the majority of it is trivial; it's either adjusting config_fn_t that the .cocci patch didn't catch, or adding forward declarations of "struct config_context ctx" to make the signatures make sense. The non-trivial changes are in cases where we are invoking a config_fn_t outside of config machinery, and we now need to decide what value of "ctx" to pass. These cases are: - trace2/tr2_cfg.c:tr2_cfg_set_fl() This is indirectly called by git_config_set() so that the trace2 machinery can notice the new config values and update its settings using the tr2 config parsing function, i.e. tr2_cfg_cb(). - builtin/checkout.c:checkout_main() This calls git_xmerge_config() as a shorthand for parsing a CLI arg. This might be worth refactoring away in the future, since git_xmerge_config() can call git_default_config(), which can do much more than just parsing. Handle them by creating a KVI_INIT macro that initializes "struct key_value_info" to a reasonable default, and use that to construct the "ctx" arg. Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-06-28 19:26:22 +00:00
void *cb)
{
struct fetch_config *config = cb;
if (!strcmp(var, "submodule.fetchjobs")) {
if (config->max_children)
*(config->max_children) =
parse_submodule_fetchjobs(var, value, ctx->kvi);
return 0;
} else if (!strcmp(var, "fetch.recursesubmodules")) {
if (config->recurse_submodules)
*(config->recurse_submodules) =
parse_fetch_recurse_submodules_arg(var, value);
return 0;
}
return 0;
}
void fetch_config_from_gitmodules(int *max_children, int *recurse_submodules)
{
struct fetch_config config = {
.max_children = max_children,
.recurse_submodules = recurse_submodules
};
config_from_gitmodules(gitmodules_fetch_config, the_repository, &config);
}
static int gitmodules_update_clone_config(const char *var, const char *value,
const struct config_context *ctx,
void *cb)
{
int *max_jobs = cb;
if (!strcmp(var, "submodule.fetchjobs"))
*max_jobs = parse_submodule_fetchjobs(var, value, ctx->kvi);
return 0;
}
void update_clone_config_from_gitmodules(int *max_jobs)
{
config_from_gitmodules(gitmodules_update_clone_config, the_repository, &max_jobs);
}