2023-02-24 00:09:23 +00:00
|
|
|
#include "git-compat-util.h"
|
2019-08-13 18:37:43 +00:00
|
|
|
#include "config.h"
|
|
|
|
|
#include "repository.h"
|
2020-09-25 12:33:34 +00:00
|
|
|
#include "midx.h"
|
2019-08-13 18:37:43 +00:00
|
|
|
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
static void repo_cfg_bool(struct repository *r, const char *key, int *dest,
|
|
|
|
|
int def)
|
|
|
|
|
{
|
|
|
|
|
if (repo_config_get_bool(r, key, dest))
|
|
|
|
|
*dest = def;
|
|
|
|
|
}
|
2019-08-13 18:37:45 +00:00
|
|
|
|
commit-graph: pass repo_settings instead of repository
The parse_commit_graph() function takes a 'struct repository *' pointer,
but it only ever accesses config settings (either directly or through
the .settings field of the repo struct). Move all relevant config
settings into the repo_settings struct, and update parse_commit_graph()
and its existing callers so that it takes 'struct repo_settings *'
instead.
Callers of parse_commit_graph() will now need to call
prepare_repo_settings() themselves, or initialize a 'struct
repo_settings' directly.
Prior to ab14d0676c (commit-graph: pass a 'struct repository *' in more
places, 2020-09-09), parsing a commit-graph was a pure function
depending only on the contents of the commit-graph itself. Commit
ab14d0676c introduced a dependency on a `struct repository` pointer, and
later commits such as b66d84756f (commit-graph: respect
'commitGraph.readChangedPaths', 2020-09-09) added dependencies on config
settings, which were accessed through the `settings` field of the
repository pointer. This field was initialized via a call to
`prepare_repo_settings()`.
Additionally, this fixes an issue in fuzz-commit-graph: In 44c7e62
(2021-12-06, repo-settings:prepare_repo_settings only in git repos),
prepare_repo_settings was changed to issue a BUG() if it is called by a
process whose CWD is not a Git repository.
The combination of commits mentioned above broke fuzz-commit-graph,
which attempts to parse arbitrary fuzzing-engine-provided bytes as a
commit graph file. Prior to this change, parse_commit_graph() called
prepare_repo_settings(), but since we run the fuzz tests without a valid
repository, we are hitting the BUG() from 44c7e62 for every test case.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-07-14 21:43:06 +00:00
|
|
|
static void repo_cfg_int(struct repository *r, const char *key, int *dest,
|
|
|
|
|
int def)
|
|
|
|
|
{
|
|
|
|
|
if (repo_config_get_int(r, key, dest))
|
|
|
|
|
*dest = def;
|
|
|
|
|
}
|
|
|
|
|
|
2019-08-13 18:37:43 +00:00
|
|
|
void prepare_repo_settings(struct repository *r)
|
|
|
|
|
{
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
int experimental;
|
2019-08-13 18:37:43 +00:00
|
|
|
int value;
|
2022-09-08 05:02:50 +00:00
|
|
|
const char *strval;
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
int manyfiles;
|
2019-08-13 18:37:43 +00:00
|
|
|
|
2021-12-06 15:55:58 +00:00
|
|
|
if (!r->gitdir)
|
|
|
|
|
BUG("Cannot add settings for uninitialized repository");
|
|
|
|
|
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
if (r->settings.initialized++)
|
2019-08-13 18:37:43 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
/* Defaults */
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
r->settings.index_version = -1;
|
|
|
|
|
r->settings.core_untracked_cache = UNTRACKED_CACHE_KEEP;
|
2022-02-02 03:42:40 +00:00
|
|
|
r->settings.fetch_negotiation_algorithm = FETCH_NEGOTIATION_CONSECUTIVE;
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
|
|
|
|
|
/* Booleans config or default, cascades to other settings */
|
|
|
|
|
repo_cfg_bool(r, "feature.manyfiles", &manyfiles, 0);
|
|
|
|
|
repo_cfg_bool(r, "feature.experimental", &experimental, 0);
|
2019-08-13 18:37:43 +00:00
|
|
|
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
/* Defaults modified by feature.* */
|
pack-bitmap.c: use commit boundary during bitmap traversal
When reachability bitmap coverage exists in a repository, Git will use a
different (and hopefully faster) traversal to compute revision walks.
Consider a set of positive and negative tips (which we'll refer to with
their standard bitmap parlance by "wants", and "haves"). In order to
figure out what objects exist between the tips, the existing traversal
in `prepare_bitmap_walk()` does something like:
1. Consider if we can even compute the set of objects with bitmaps,
and fall back to the usual traversal if we cannot. For example,
pathspec limiting traversals can't be computed using bitmaps (since
they don't know which objects are at which paths). The same is true
of certain kinds of non-trivial object filters.
2. If we can compute the traversal with bitmaps, partition the
(dereferenced) tips into two object lists, "haves", and "wants",
based on whether or not the objects have the UNINTERESTING flag,
respectively.
3. Fall back to the ordinary object traversal if either (a) there are
more than zero haves, none of which are in the bitmapped pack or
MIDX, or (b) there are no wants.
4. Construct a reachability bitmap for the "haves" side by walking
from the revision tips down to any existing bitmaps, OR-ing in any
bitmaps as they are found.
5. Then do the same for the "wants" side, stopping at any objects that
appear in the "haves" bitmap.
6. Filter the results if any object filter (that can be easily
computed with bitmaps alone) was given, and then return back to the
caller.
When there is good bitmap coverage relative to the traversal tips, this
walk is often significantly faster than an ordinary object traversal
because it can visit far fewer objects.
But in certain cases, it can be significantly *slower* than the usual
object traversal. Why? Because we need to compute complete bitmaps on
either side of the walk. If either one (or both) of the sides require
walking many (or all!) objects before they get to an existing bitmap,
the extra bitmap machinery is mostly or all overhead.
One of the benefits, however, is that even if the walk is slower, bitmap
traversals are guaranteed to provide an *exact* answer. Unlike the
traditional object traversal algorithm, which can over-count the results
by not opening trees for older commits, the bitmap walk builds an exact
reachability bitmap for either side, meaning the results are never
over-counted.
But producing non-exact results is OK for our traversal here (both in
the bitmap case and not), as long as the results are over-counted, not
under.
Relaxing the bitmap traversal to allow it to produce over-counted
results gives us the opportunity to make some significant improvements.
Instead of the above, the new algorithm only has to walk from the
*boundary* down to the nearest bitmap, instead of from each of the
UNINTERESTING tips.
The boundary-based approach still has degenerate cases, but we'll show
in a moment that it is often a significant improvement.
The new algorithm works as follows:
1. Build a (partial) bitmap of the haves side by first OR-ing any
bitmap(s) that already exist for UNINTERESTING commits between the
haves and the boundary.
2. For each commit along the boundary, add it as a fill-in traversal
tip (where the traversal terminates once an existing bitmap is
found), and perform fill-in traversal.
3. Build up a complete bitmap of the wants side as usual, stopping any
time we intersect the (partial) haves side.
4. Return the results.
And is more-or-less equivalent to using the *old* algorithm with this
invocation:
$ git rev-list --objects --use-bitmap-index $WANTS --not \
$(git rev-list --objects --boundary $WANTS --not $HAVES |
perl -lne 'print $1 if /^-(.*)/')
The new result performs significantly better in many cases, particularly
when the distance from the boundary commit(s) to an existing bitmap is
shorter than the distance from (all of) the have tips to the nearest
bitmapped commit.
Note that when using the old bitmap traversal algorithm, the results can
be *slower* than without bitmaps! Under the new algorithm, the result is
computed faster with bitmaps than without (at the cost of over-counting
the true number of objects in a similar fashion as the non-bitmap
traversal):
# (Computing the number of tagged objects not on any branches
# without bitmaps).
$ time git rev-list --count --objects --tags --not --branches
20
real 0m1.388s
user 0m1.092s
sys 0m0.296s
# (Computing the same query using the old bitmap traversal).
$ time git rev-list --count --objects --tags --not --branches --use-bitmap-index
19
real 0m22.709s
user 0m21.628s
sys 0m1.076s
# (this commit)
$ time git.compile rev-list --count --objects --tags --not --branches --use-bitmap-index
19
real 0m1.518s
user 0m1.234s
sys 0m0.284s
The new algorithm is still slower than not using bitmaps at all, but it
is nearly a 15-fold improvement over the existing traversal.
In a more realistic setting (using my local copy of git.git), I can
observe a similar (if more modest) speed-up:
$ argv="--count --objects --branches --not --tags"
hyperfine \
-n 'no bitmaps' "git.compile rev-list $argv" \
-n 'existing traversal' "git.compile rev-list --use-bitmap-index $argv" \
-n 'boundary traversal' "git.compile -c pack.useBitmapBoundaryTraversal=true rev-list --use-bitmap-index $argv"
Benchmark 1: no bitmaps
Time (mean ± σ): 124.6 ms ± 2.1 ms [User: 103.7 ms, System: 20.8 ms]
Range (min … max): 122.6 ms … 133.1 ms 22 runs
Benchmark 2: existing traversal
Time (mean ± σ): 368.6 ms ± 3.0 ms [User: 325.3 ms, System: 43.1 ms]
Range (min … max): 365.1 ms … 374.8 ms 10 runs
Benchmark 3: boundary traversal
Time (mean ± σ): 167.6 ms ± 0.9 ms [User: 139.5 ms, System: 27.9 ms]
Range (min … max): 166.1 ms … 169.2 ms 17 runs
Summary
'no bitmaps' ran
1.34 ± 0.02 times faster than 'boundary traversal'
2.96 ± 0.05 times faster than 'existing traversal'
Here, the new algorithm is also still slower than not using bitmaps, but
represents a more than 2-fold improvement over the existing traversal in
a more modest example.
Since this algorithm was originally written (nearly a year and a half
ago, at the time of writing), the bitmap lookup table shipped, making
the new algorithm's result more competitive. A few other future
directions for improving bitmap traversal times beyond not using bitmaps
at all:
- Decrease the cost to decompress and OR together many bitmaps
together (particularly when enumerating the uninteresting side of
the walk). Here we could explore more efficient bitmap storage
techniques, like Roaring+Run and/or use SIMD instructions to speed
up ORing them together.
- Store pseudo-merge bitmaps, which could allow us to OR together
fewer "summary" bitmaps (which would also help with the above).
Helped-by: Jeff King <peff@peff.net>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-05-08 17:38:12 +00:00
|
|
|
if (experimental) {
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
r->settings.fetch_negotiation_algorithm = FETCH_NEGOTIATION_SKIPPING;
|
pack-bitmap.c: use commit boundary during bitmap traversal
When reachability bitmap coverage exists in a repository, Git will use a
different (and hopefully faster) traversal to compute revision walks.
Consider a set of positive and negative tips (which we'll refer to with
their standard bitmap parlance by "wants", and "haves"). In order to
figure out what objects exist between the tips, the existing traversal
in `prepare_bitmap_walk()` does something like:
1. Consider if we can even compute the set of objects with bitmaps,
and fall back to the usual traversal if we cannot. For example,
pathspec limiting traversals can't be computed using bitmaps (since
they don't know which objects are at which paths). The same is true
of certain kinds of non-trivial object filters.
2. If we can compute the traversal with bitmaps, partition the
(dereferenced) tips into two object lists, "haves", and "wants",
based on whether or not the objects have the UNINTERESTING flag,
respectively.
3. Fall back to the ordinary object traversal if either (a) there are
more than zero haves, none of which are in the bitmapped pack or
MIDX, or (b) there are no wants.
4. Construct a reachability bitmap for the "haves" side by walking
from the revision tips down to any existing bitmaps, OR-ing in any
bitmaps as they are found.
5. Then do the same for the "wants" side, stopping at any objects that
appear in the "haves" bitmap.
6. Filter the results if any object filter (that can be easily
computed with bitmaps alone) was given, and then return back to the
caller.
When there is good bitmap coverage relative to the traversal tips, this
walk is often significantly faster than an ordinary object traversal
because it can visit far fewer objects.
But in certain cases, it can be significantly *slower* than the usual
object traversal. Why? Because we need to compute complete bitmaps on
either side of the walk. If either one (or both) of the sides require
walking many (or all!) objects before they get to an existing bitmap,
the extra bitmap machinery is mostly or all overhead.
One of the benefits, however, is that even if the walk is slower, bitmap
traversals are guaranteed to provide an *exact* answer. Unlike the
traditional object traversal algorithm, which can over-count the results
by not opening trees for older commits, the bitmap walk builds an exact
reachability bitmap for either side, meaning the results are never
over-counted.
But producing non-exact results is OK for our traversal here (both in
the bitmap case and not), as long as the results are over-counted, not
under.
Relaxing the bitmap traversal to allow it to produce over-counted
results gives us the opportunity to make some significant improvements.
Instead of the above, the new algorithm only has to walk from the
*boundary* down to the nearest bitmap, instead of from each of the
UNINTERESTING tips.
The boundary-based approach still has degenerate cases, but we'll show
in a moment that it is often a significant improvement.
The new algorithm works as follows:
1. Build a (partial) bitmap of the haves side by first OR-ing any
bitmap(s) that already exist for UNINTERESTING commits between the
haves and the boundary.
2. For each commit along the boundary, add it as a fill-in traversal
tip (where the traversal terminates once an existing bitmap is
found), and perform fill-in traversal.
3. Build up a complete bitmap of the wants side as usual, stopping any
time we intersect the (partial) haves side.
4. Return the results.
And is more-or-less equivalent to using the *old* algorithm with this
invocation:
$ git rev-list --objects --use-bitmap-index $WANTS --not \
$(git rev-list --objects --boundary $WANTS --not $HAVES |
perl -lne 'print $1 if /^-(.*)/')
The new result performs significantly better in many cases, particularly
when the distance from the boundary commit(s) to an existing bitmap is
shorter than the distance from (all of) the have tips to the nearest
bitmapped commit.
Note that when using the old bitmap traversal algorithm, the results can
be *slower* than without bitmaps! Under the new algorithm, the result is
computed faster with bitmaps than without (at the cost of over-counting
the true number of objects in a similar fashion as the non-bitmap
traversal):
# (Computing the number of tagged objects not on any branches
# without bitmaps).
$ time git rev-list --count --objects --tags --not --branches
20
real 0m1.388s
user 0m1.092s
sys 0m0.296s
# (Computing the same query using the old bitmap traversal).
$ time git rev-list --count --objects --tags --not --branches --use-bitmap-index
19
real 0m22.709s
user 0m21.628s
sys 0m1.076s
# (this commit)
$ time git.compile rev-list --count --objects --tags --not --branches --use-bitmap-index
19
real 0m1.518s
user 0m1.234s
sys 0m0.284s
The new algorithm is still slower than not using bitmaps at all, but it
is nearly a 15-fold improvement over the existing traversal.
In a more realistic setting (using my local copy of git.git), I can
observe a similar (if more modest) speed-up:
$ argv="--count --objects --branches --not --tags"
hyperfine \
-n 'no bitmaps' "git.compile rev-list $argv" \
-n 'existing traversal' "git.compile rev-list --use-bitmap-index $argv" \
-n 'boundary traversal' "git.compile -c pack.useBitmapBoundaryTraversal=true rev-list --use-bitmap-index $argv"
Benchmark 1: no bitmaps
Time (mean ± σ): 124.6 ms ± 2.1 ms [User: 103.7 ms, System: 20.8 ms]
Range (min … max): 122.6 ms … 133.1 ms 22 runs
Benchmark 2: existing traversal
Time (mean ± σ): 368.6 ms ± 3.0 ms [User: 325.3 ms, System: 43.1 ms]
Range (min … max): 365.1 ms … 374.8 ms 10 runs
Benchmark 3: boundary traversal
Time (mean ± σ): 167.6 ms ± 0.9 ms [User: 139.5 ms, System: 27.9 ms]
Range (min … max): 166.1 ms … 169.2 ms 17 runs
Summary
'no bitmaps' ran
1.34 ± 0.02 times faster than 'boundary traversal'
2.96 ± 0.05 times faster than 'existing traversal'
Here, the new algorithm is also still slower than not using bitmaps, but
represents a more than 2-fold improvement over the existing traversal in
a more modest example.
Since this algorithm was originally written (nearly a year and a half
ago, at the time of writing), the bitmap lookup table shipped, making
the new algorithm's result more competitive. A few other future
directions for improving bitmap traversal times beyond not using bitmaps
at all:
- Decrease the cost to decompress and OR together many bitmaps
together (particularly when enumerating the uninteresting side of
the walk). Here we could explore more efficient bitmap storage
techniques, like Roaring+Run and/or use SIMD instructions to speed
up ORing them together.
- Store pseudo-merge bitmaps, which could allow us to OR together
fewer "summary" bitmaps (which would also help with the above).
Helped-by: Jeff King <peff@peff.net>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-05-08 17:38:12 +00:00
|
|
|
r->settings.pack_use_bitmap_boundary_traversal = 1;
|
2024-02-05 22:50:23 +00:00
|
|
|
r->settings.pack_use_multi_pack_reuse = 1;
|
pack-bitmap.c: use commit boundary during bitmap traversal
When reachability bitmap coverage exists in a repository, Git will use a
different (and hopefully faster) traversal to compute revision walks.
Consider a set of positive and negative tips (which we'll refer to with
their standard bitmap parlance by "wants", and "haves"). In order to
figure out what objects exist between the tips, the existing traversal
in `prepare_bitmap_walk()` does something like:
1. Consider if we can even compute the set of objects with bitmaps,
and fall back to the usual traversal if we cannot. For example,
pathspec limiting traversals can't be computed using bitmaps (since
they don't know which objects are at which paths). The same is true
of certain kinds of non-trivial object filters.
2. If we can compute the traversal with bitmaps, partition the
(dereferenced) tips into two object lists, "haves", and "wants",
based on whether or not the objects have the UNINTERESTING flag,
respectively.
3. Fall back to the ordinary object traversal if either (a) there are
more than zero haves, none of which are in the bitmapped pack or
MIDX, or (b) there are no wants.
4. Construct a reachability bitmap for the "haves" side by walking
from the revision tips down to any existing bitmaps, OR-ing in any
bitmaps as they are found.
5. Then do the same for the "wants" side, stopping at any objects that
appear in the "haves" bitmap.
6. Filter the results if any object filter (that can be easily
computed with bitmaps alone) was given, and then return back to the
caller.
When there is good bitmap coverage relative to the traversal tips, this
walk is often significantly faster than an ordinary object traversal
because it can visit far fewer objects.
But in certain cases, it can be significantly *slower* than the usual
object traversal. Why? Because we need to compute complete bitmaps on
either side of the walk. If either one (or both) of the sides require
walking many (or all!) objects before they get to an existing bitmap,
the extra bitmap machinery is mostly or all overhead.
One of the benefits, however, is that even if the walk is slower, bitmap
traversals are guaranteed to provide an *exact* answer. Unlike the
traditional object traversal algorithm, which can over-count the results
by not opening trees for older commits, the bitmap walk builds an exact
reachability bitmap for either side, meaning the results are never
over-counted.
But producing non-exact results is OK for our traversal here (both in
the bitmap case and not), as long as the results are over-counted, not
under.
Relaxing the bitmap traversal to allow it to produce over-counted
results gives us the opportunity to make some significant improvements.
Instead of the above, the new algorithm only has to walk from the
*boundary* down to the nearest bitmap, instead of from each of the
UNINTERESTING tips.
The boundary-based approach still has degenerate cases, but we'll show
in a moment that it is often a significant improvement.
The new algorithm works as follows:
1. Build a (partial) bitmap of the haves side by first OR-ing any
bitmap(s) that already exist for UNINTERESTING commits between the
haves and the boundary.
2. For each commit along the boundary, add it as a fill-in traversal
tip (where the traversal terminates once an existing bitmap is
found), and perform fill-in traversal.
3. Build up a complete bitmap of the wants side as usual, stopping any
time we intersect the (partial) haves side.
4. Return the results.
And is more-or-less equivalent to using the *old* algorithm with this
invocation:
$ git rev-list --objects --use-bitmap-index $WANTS --not \
$(git rev-list --objects --boundary $WANTS --not $HAVES |
perl -lne 'print $1 if /^-(.*)/')
The new result performs significantly better in many cases, particularly
when the distance from the boundary commit(s) to an existing bitmap is
shorter than the distance from (all of) the have tips to the nearest
bitmapped commit.
Note that when using the old bitmap traversal algorithm, the results can
be *slower* than without bitmaps! Under the new algorithm, the result is
computed faster with bitmaps than without (at the cost of over-counting
the true number of objects in a similar fashion as the non-bitmap
traversal):
# (Computing the number of tagged objects not on any branches
# without bitmaps).
$ time git rev-list --count --objects --tags --not --branches
20
real 0m1.388s
user 0m1.092s
sys 0m0.296s
# (Computing the same query using the old bitmap traversal).
$ time git rev-list --count --objects --tags --not --branches --use-bitmap-index
19
real 0m22.709s
user 0m21.628s
sys 0m1.076s
# (this commit)
$ time git.compile rev-list --count --objects --tags --not --branches --use-bitmap-index
19
real 0m1.518s
user 0m1.234s
sys 0m0.284s
The new algorithm is still slower than not using bitmaps at all, but it
is nearly a 15-fold improvement over the existing traversal.
In a more realistic setting (using my local copy of git.git), I can
observe a similar (if more modest) speed-up:
$ argv="--count --objects --branches --not --tags"
hyperfine \
-n 'no bitmaps' "git.compile rev-list $argv" \
-n 'existing traversal' "git.compile rev-list --use-bitmap-index $argv" \
-n 'boundary traversal' "git.compile -c pack.useBitmapBoundaryTraversal=true rev-list --use-bitmap-index $argv"
Benchmark 1: no bitmaps
Time (mean ± σ): 124.6 ms ± 2.1 ms [User: 103.7 ms, System: 20.8 ms]
Range (min … max): 122.6 ms … 133.1 ms 22 runs
Benchmark 2: existing traversal
Time (mean ± σ): 368.6 ms ± 3.0 ms [User: 325.3 ms, System: 43.1 ms]
Range (min … max): 365.1 ms … 374.8 ms 10 runs
Benchmark 3: boundary traversal
Time (mean ± σ): 167.6 ms ± 0.9 ms [User: 139.5 ms, System: 27.9 ms]
Range (min … max): 166.1 ms … 169.2 ms 17 runs
Summary
'no bitmaps' ran
1.34 ± 0.02 times faster than 'boundary traversal'
2.96 ± 0.05 times faster than 'existing traversal'
Here, the new algorithm is also still slower than not using bitmaps, but
represents a more than 2-fold improvement over the existing traversal in
a more modest example.
Since this algorithm was originally written (nearly a year and a half
ago, at the time of writing), the bitmap lookup table shipped, making
the new algorithm's result more competitive. A few other future
directions for improving bitmap traversal times beyond not using bitmaps
at all:
- Decrease the cost to decompress and OR together many bitmaps
together (particularly when enumerating the uninteresting side of
the walk). Here we could explore more efficient bitmap storage
techniques, like Roaring+Run and/or use SIMD instructions to speed
up ORing them together.
- Store pseudo-merge bitmaps, which could allow us to OR together
fewer "summary" bitmaps (which would also help with the above).
Helped-by: Jeff King <peff@peff.net>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-05-08 17:38:12 +00:00
|
|
|
}
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
if (manyfiles) {
|
|
|
|
|
r->settings.index_version = 4;
|
2023-01-06 16:31:56 +00:00
|
|
|
r->settings.index_skip_hash = 1;
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
r->settings.core_untracked_cache = UNTRACKED_CACHE_WRITE;
|
|
|
|
|
}
|
|
|
|
|
|
commit-graph: pass repo_settings instead of repository
The parse_commit_graph() function takes a 'struct repository *' pointer,
but it only ever accesses config settings (either directly or through
the .settings field of the repo struct). Move all relevant config
settings into the repo_settings struct, and update parse_commit_graph()
and its existing callers so that it takes 'struct repo_settings *'
instead.
Callers of parse_commit_graph() will now need to call
prepare_repo_settings() themselves, or initialize a 'struct
repo_settings' directly.
Prior to ab14d0676c (commit-graph: pass a 'struct repository *' in more
places, 2020-09-09), parsing a commit-graph was a pure function
depending only on the contents of the commit-graph itself. Commit
ab14d0676c introduced a dependency on a `struct repository` pointer, and
later commits such as b66d84756f (commit-graph: respect
'commitGraph.readChangedPaths', 2020-09-09) added dependencies on config
settings, which were accessed through the `settings` field of the
repository pointer. This field was initialized via a call to
`prepare_repo_settings()`.
Additionally, this fixes an issue in fuzz-commit-graph: In 44c7e62
(2021-12-06, repo-settings:prepare_repo_settings only in git repos),
prepare_repo_settings was changed to issue a BUG() if it is called by a
process whose CWD is not a Git repository.
The combination of commits mentioned above broke fuzz-commit-graph,
which attempts to parse arbitrary fuzzing-engine-provided bytes as a
commit graph file. Prior to this change, parse_commit_graph() called
prepare_repo_settings(), but since we run the fuzz tests without a valid
repository, we are hitting the BUG() from 44c7e62 for every test case.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-07-14 21:43:06 +00:00
|
|
|
/* Commit graph config or default, does not cascade (simple) */
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
repo_cfg_bool(r, "core.commitgraph", &r->settings.core_commit_graph, 1);
|
commit-graph: pass repo_settings instead of repository
The parse_commit_graph() function takes a 'struct repository *' pointer,
but it only ever accesses config settings (either directly or through
the .settings field of the repo struct). Move all relevant config
settings into the repo_settings struct, and update parse_commit_graph()
and its existing callers so that it takes 'struct repo_settings *'
instead.
Callers of parse_commit_graph() will now need to call
prepare_repo_settings() themselves, or initialize a 'struct
repo_settings' directly.
Prior to ab14d0676c (commit-graph: pass a 'struct repository *' in more
places, 2020-09-09), parsing a commit-graph was a pure function
depending only on the contents of the commit-graph itself. Commit
ab14d0676c introduced a dependency on a `struct repository` pointer, and
later commits such as b66d84756f (commit-graph: respect
'commitGraph.readChangedPaths', 2020-09-09) added dependencies on config
settings, which were accessed through the `settings` field of the
repository pointer. This field was initialized via a call to
`prepare_repo_settings()`.
Additionally, this fixes an issue in fuzz-commit-graph: In 44c7e62
(2021-12-06, repo-settings:prepare_repo_settings only in git repos),
prepare_repo_settings was changed to issue a BUG() if it is called by a
process whose CWD is not a Git repository.
The combination of commits mentioned above broke fuzz-commit-graph,
which attempts to parse arbitrary fuzzing-engine-provided bytes as a
commit graph file. Prior to this change, parse_commit_graph() called
prepare_repo_settings(), but since we run the fuzz tests without a valid
repository, we are hitting the BUG() from 44c7e62 for every test case.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-07-14 21:43:06 +00:00
|
|
|
repo_cfg_int(r, "commitgraph.generationversion", &r->settings.commit_graph_generation_version, 2);
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
repo_cfg_bool(r, "commitgraph.readchangedpaths", &r->settings.commit_graph_read_changed_paths, 1);
|
|
|
|
|
repo_cfg_bool(r, "gc.writecommitgraph", &r->settings.gc_write_commit_graph, 1);
|
|
|
|
|
repo_cfg_bool(r, "fetch.writecommitgraph", &r->settings.fetch_write_commit_graph, 0);
|
commit-graph: pass repo_settings instead of repository
The parse_commit_graph() function takes a 'struct repository *' pointer,
but it only ever accesses config settings (either directly or through
the .settings field of the repo struct). Move all relevant config
settings into the repo_settings struct, and update parse_commit_graph()
and its existing callers so that it takes 'struct repo_settings *'
instead.
Callers of parse_commit_graph() will now need to call
prepare_repo_settings() themselves, or initialize a 'struct
repo_settings' directly.
Prior to ab14d0676c (commit-graph: pass a 'struct repository *' in more
places, 2020-09-09), parsing a commit-graph was a pure function
depending only on the contents of the commit-graph itself. Commit
ab14d0676c introduced a dependency on a `struct repository` pointer, and
later commits such as b66d84756f (commit-graph: respect
'commitGraph.readChangedPaths', 2020-09-09) added dependencies on config
settings, which were accessed through the `settings` field of the
repository pointer. This field was initialized via a call to
`prepare_repo_settings()`.
Additionally, this fixes an issue in fuzz-commit-graph: In 44c7e62
(2021-12-06, repo-settings:prepare_repo_settings only in git repos),
prepare_repo_settings was changed to issue a BUG() if it is called by a
process whose CWD is not a Git repository.
The combination of commits mentioned above broke fuzz-commit-graph,
which attempts to parse arbitrary fuzzing-engine-provided bytes as a
commit graph file. Prior to this change, parse_commit_graph() called
prepare_repo_settings(), but since we run the fuzz tests without a valid
repository, we are hitting the BUG() from 44c7e62 for every test case.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-07-14 21:43:06 +00:00
|
|
|
|
|
|
|
|
/* Boolean config or default, does not cascade (simple) */
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
repo_cfg_bool(r, "pack.usesparse", &r->settings.pack_use_sparse, 1);
|
|
|
|
|
repo_cfg_bool(r, "core.multipackindex", &r->settings.core_multi_pack_index, 1);
|
repository.h: don't use a mix of int and bitfields
Change the bitfield added in 58300f47432 (sparse-index: add
index.sparse config option, 2021-03-30) and 3964fc2aae7 (sparse-index:
add guard to ensure full index, 2021-03-30) to just use an "int"
boolean instead.
It might be smart to optimize the space here in the future, but by
consistently using an "int" we can take its address and pass it to
repo_cfg_bool(), and therefore don't need to handle "sparse_index" as
a special-case when reading the "index.sparse" setting.
There's no corresponding config for "command_requires_full_index", but
let's change it too for consistency and to prevent future bugs
creeping in due to one of these being "unsigned".
Using "int" consistently also prevents subtle bugs or undesired
control flow creeping in here. Before the preceding commit the
initialization of "command_requires_full_index" in
prepare_repo_settings() did nothing, i.e. this:
r->settings.command_requires_full_index = 1
Was redundant to the earlier memset() to -1. Likewise for
"sparse_index" added in 58300f47432 (sparse-index: add index.sparse
config option, 2021-03-30) the code and comment added there was
misleading, we weren't initializing it to off, but re-initializing it
from "1" to "0", and then finally checking the config, and perhaps
setting it to "1" again. I.e. we could have applied this patch before
the preceding commit:
+ assert(r->settings.command_requires_full_index == 1);
r->settings.command_requires_full_index = 1;
/*
* Initialize this as off.
*/
+ assert(r->settings.sparse_index == 1);
r->settings.sparse_index = 0;
if (!repo_config_get_bool(r, "index.sparse", &value) && value)
r->settings.sparse_index = 1;
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:03 +00:00
|
|
|
repo_cfg_bool(r, "index.sparse", &r->settings.sparse_index, 0);
|
2023-01-06 16:31:56 +00:00
|
|
|
repo_cfg_bool(r, "index.skiphash", &r->settings.index_skip_hash, r->settings.index_skip_hash);
|
pack-revindex: introduce `pack.readReverseIndex`
Since 1615c567b8 (Documentation/config/pack.txt: advertise
'pack.writeReverseIndex', 2021-01-25), we have had the
`pack.writeReverseIndex` configuration option, which tells Git whether
or not it is allowed to write a ".rev" file when indexing a pack.
Introduce a complementary configuration knob, `pack.readReverseIndex` to
control whether or not Git will read any ".rev" file(s) that may be
available on disk.
This option is useful for debugging, as well as disabling the effect of
".rev" files in certain instances.
This is useful because of the trade-off[^1] between the time it takes to
generate a reverse index (slow from scratch, fast when reading an
existing ".rev" file), and the time it takes to access a record (the
opposite).
For example, even though it is faster to use the on-disk reverse index
when computing the on-disk size of a packed object, it is slower to
enumerate the same value for all objects.
Here are a couple of examples from linux.git. When computing the above
for a single object, using the on-disk reverse index is significantly
faster:
$ git rev-parse HEAD >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --batch-check="%(objectsize:disk)" <in'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 302.5 ms ± 12.5 ms [User: 258.7 ms, System: 43.6 ms]
Range (min … max): 291.1 ms … 328.1 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 3.9 ms ± 0.3 ms [User: 1.6 ms, System: 2.4 ms]
Range (min … max): 2.0 ms … 4.4 ms 801 runs
Summary
'git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in' ran
77.29 ± 7.14 times faster than 'git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in'
, but when instead trying to compute the on-disk object size for all
objects in the repository, using the ".rev" file is a disadvantage over
creating the reverse index from scratch:
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --batch-check="%(objectsize:disk)" --batch-all-objects'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" --batch-all-objects
Time (mean ± σ): 8.258 s ± 0.035 s [User: 7.949 s, System: 0.308 s]
Range (min … max): 8.199 s … 8.293 s 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" --batch-all-objects
Time (mean ± σ): 16.976 s ± 0.107 s [User: 16.706 s, System: 0.268 s]
Range (min … max): 16.839 s … 17.105 s 10 runs
Summary
'git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" --batch-all-objects' ran
2.06 ± 0.02 times faster than 'git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" --batch-all-objects'
Luckily, the results when running `git cat-file` with `--unordered` are
closer together:
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects
Time (mean ± σ): 5.066 s ± 0.105 s [User: 4.792 s, System: 0.274 s]
Range (min … max): 4.943 s … 5.220 s 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects
Time (mean ± σ): 6.193 s ± 0.069 s [User: 5.937 s, System: 0.255 s]
Range (min … max): 6.145 s … 6.356 s 10 runs
Summary
'git.compile -c pack.readReverseIndex=false cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects' ran
1.22 ± 0.03 times faster than 'git.compile -c pack.readReverseIndex=true cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects'
Because the equilibrium point between these two is highly machine- and
repository-dependent, allow users to configure whether or not they will
read any ".rev" file(s) with this configuration knob.
[^1]: Generating a reverse index in memory takes O(N) time (where N is
the number of objects in the repository), since we use a radix sort.
Reading an entry from an on-disk ".rev" file is slower since each
operation is bound by disk I/O instead of memory I/O.
In order to compute the on-disk size of a packed object, we need to
find the offset of our object, and the adjacent object (the on-disk
size difference of these two). Finding the first offset requires a
binary search. Finding the latter involves a single .rev lookup.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-04-12 22:20:30 +00:00
|
|
|
repo_cfg_bool(r, "pack.readreverseindex", &r->settings.pack_read_reverse_index, 1);
|
pack-bitmap.c: use commit boundary during bitmap traversal
When reachability bitmap coverage exists in a repository, Git will use a
different (and hopefully faster) traversal to compute revision walks.
Consider a set of positive and negative tips (which we'll refer to with
their standard bitmap parlance by "wants", and "haves"). In order to
figure out what objects exist between the tips, the existing traversal
in `prepare_bitmap_walk()` does something like:
1. Consider if we can even compute the set of objects with bitmaps,
and fall back to the usual traversal if we cannot. For example,
pathspec limiting traversals can't be computed using bitmaps (since
they don't know which objects are at which paths). The same is true
of certain kinds of non-trivial object filters.
2. If we can compute the traversal with bitmaps, partition the
(dereferenced) tips into two object lists, "haves", and "wants",
based on whether or not the objects have the UNINTERESTING flag,
respectively.
3. Fall back to the ordinary object traversal if either (a) there are
more than zero haves, none of which are in the bitmapped pack or
MIDX, or (b) there are no wants.
4. Construct a reachability bitmap for the "haves" side by walking
from the revision tips down to any existing bitmaps, OR-ing in any
bitmaps as they are found.
5. Then do the same for the "wants" side, stopping at any objects that
appear in the "haves" bitmap.
6. Filter the results if any object filter (that can be easily
computed with bitmaps alone) was given, and then return back to the
caller.
When there is good bitmap coverage relative to the traversal tips, this
walk is often significantly faster than an ordinary object traversal
because it can visit far fewer objects.
But in certain cases, it can be significantly *slower* than the usual
object traversal. Why? Because we need to compute complete bitmaps on
either side of the walk. If either one (or both) of the sides require
walking many (or all!) objects before they get to an existing bitmap,
the extra bitmap machinery is mostly or all overhead.
One of the benefits, however, is that even if the walk is slower, bitmap
traversals are guaranteed to provide an *exact* answer. Unlike the
traditional object traversal algorithm, which can over-count the results
by not opening trees for older commits, the bitmap walk builds an exact
reachability bitmap for either side, meaning the results are never
over-counted.
But producing non-exact results is OK for our traversal here (both in
the bitmap case and not), as long as the results are over-counted, not
under.
Relaxing the bitmap traversal to allow it to produce over-counted
results gives us the opportunity to make some significant improvements.
Instead of the above, the new algorithm only has to walk from the
*boundary* down to the nearest bitmap, instead of from each of the
UNINTERESTING tips.
The boundary-based approach still has degenerate cases, but we'll show
in a moment that it is often a significant improvement.
The new algorithm works as follows:
1. Build a (partial) bitmap of the haves side by first OR-ing any
bitmap(s) that already exist for UNINTERESTING commits between the
haves and the boundary.
2. For each commit along the boundary, add it as a fill-in traversal
tip (where the traversal terminates once an existing bitmap is
found), and perform fill-in traversal.
3. Build up a complete bitmap of the wants side as usual, stopping any
time we intersect the (partial) haves side.
4. Return the results.
And is more-or-less equivalent to using the *old* algorithm with this
invocation:
$ git rev-list --objects --use-bitmap-index $WANTS --not \
$(git rev-list --objects --boundary $WANTS --not $HAVES |
perl -lne 'print $1 if /^-(.*)/')
The new result performs significantly better in many cases, particularly
when the distance from the boundary commit(s) to an existing bitmap is
shorter than the distance from (all of) the have tips to the nearest
bitmapped commit.
Note that when using the old bitmap traversal algorithm, the results can
be *slower* than without bitmaps! Under the new algorithm, the result is
computed faster with bitmaps than without (at the cost of over-counting
the true number of objects in a similar fashion as the non-bitmap
traversal):
# (Computing the number of tagged objects not on any branches
# without bitmaps).
$ time git rev-list --count --objects --tags --not --branches
20
real 0m1.388s
user 0m1.092s
sys 0m0.296s
# (Computing the same query using the old bitmap traversal).
$ time git rev-list --count --objects --tags --not --branches --use-bitmap-index
19
real 0m22.709s
user 0m21.628s
sys 0m1.076s
# (this commit)
$ time git.compile rev-list --count --objects --tags --not --branches --use-bitmap-index
19
real 0m1.518s
user 0m1.234s
sys 0m0.284s
The new algorithm is still slower than not using bitmaps at all, but it
is nearly a 15-fold improvement over the existing traversal.
In a more realistic setting (using my local copy of git.git), I can
observe a similar (if more modest) speed-up:
$ argv="--count --objects --branches --not --tags"
hyperfine \
-n 'no bitmaps' "git.compile rev-list $argv" \
-n 'existing traversal' "git.compile rev-list --use-bitmap-index $argv" \
-n 'boundary traversal' "git.compile -c pack.useBitmapBoundaryTraversal=true rev-list --use-bitmap-index $argv"
Benchmark 1: no bitmaps
Time (mean ± σ): 124.6 ms ± 2.1 ms [User: 103.7 ms, System: 20.8 ms]
Range (min … max): 122.6 ms … 133.1 ms 22 runs
Benchmark 2: existing traversal
Time (mean ± σ): 368.6 ms ± 3.0 ms [User: 325.3 ms, System: 43.1 ms]
Range (min … max): 365.1 ms … 374.8 ms 10 runs
Benchmark 3: boundary traversal
Time (mean ± σ): 167.6 ms ± 0.9 ms [User: 139.5 ms, System: 27.9 ms]
Range (min … max): 166.1 ms … 169.2 ms 17 runs
Summary
'no bitmaps' ran
1.34 ± 0.02 times faster than 'boundary traversal'
2.96 ± 0.05 times faster than 'existing traversal'
Here, the new algorithm is also still slower than not using bitmaps, but
represents a more than 2-fold improvement over the existing traversal in
a more modest example.
Since this algorithm was originally written (nearly a year and a half
ago, at the time of writing), the bitmap lookup table shipped, making
the new algorithm's result more competitive. A few other future
directions for improving bitmap traversal times beyond not using bitmaps
at all:
- Decrease the cost to decompress and OR together many bitmaps
together (particularly when enumerating the uninteresting side of
the walk). Here we could explore more efficient bitmap storage
techniques, like Roaring+Run and/or use SIMD instructions to speed
up ORing them together.
- Store pseudo-merge bitmaps, which could allow us to OR together
fewer "summary" bitmaps (which would also help with the above).
Helped-by: Jeff King <peff@peff.net>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-05-08 17:38:12 +00:00
|
|
|
repo_cfg_bool(r, "pack.usebitmapboundarytraversal",
|
|
|
|
|
&r->settings.pack_use_bitmap_boundary_traversal,
|
|
|
|
|
r->settings.pack_use_bitmap_boundary_traversal);
|
2023-06-06 13:24:37 +00:00
|
|
|
repo_cfg_bool(r, "core.usereplacerefs", &r->settings.read_replace_refs, 1);
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The GIT_TEST_MULTI_PACK_INDEX variable is special in that
|
|
|
|
|
* either it *or* the config sets
|
|
|
|
|
* r->settings.core_multi_pack_index if true. We don't take
|
|
|
|
|
* the environment variable if it exists (even if false) over
|
|
|
|
|
* any config, as in most other cases.
|
|
|
|
|
*/
|
|
|
|
|
if (git_env_bool(GIT_TEST_MULTI_PACK_INDEX, 0))
|
|
|
|
|
r->settings.core_multi_pack_index = 1;
|
2019-08-13 18:37:43 +00:00
|
|
|
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
/*
|
|
|
|
|
* Non-boolean config
|
|
|
|
|
*/
|
2019-10-23 20:38:57 +00:00
|
|
|
if (!repo_config_get_int(r, "index.version", &value))
|
2019-08-13 18:37:43 +00:00
|
|
|
r->settings.index_version = value;
|
2019-08-13 18:37:46 +00:00
|
|
|
|
2022-09-08 05:02:50 +00:00
|
|
|
if (!repo_config_get_string_tmp(r, "core.untrackedcache", &strval)) {
|
repo-settings.c: simplify the setup
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e7534 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd2 (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09b (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb659993 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad1 (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-21 13:13:02 +00:00
|
|
|
int v = git_parse_maybe_bool(strval);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If it's set to "keep", or some other non-boolean
|
|
|
|
|
* value then "v < 0". Then we do nothing and keep it
|
|
|
|
|
* at the default of UNTRACKED_CACHE_KEEP.
|
|
|
|
|
*/
|
|
|
|
|
if (v >= 0)
|
|
|
|
|
r->settings.core_untracked_cache = v ?
|
|
|
|
|
UNTRACKED_CACHE_WRITE : UNTRACKED_CACHE_REMOVE;
|
2019-08-13 18:37:46 +00:00
|
|
|
}
|
|
|
|
|
|
2022-09-08 05:02:50 +00:00
|
|
|
if (!repo_config_get_string_tmp(r, "fetch.negotiationalgorithm", &strval)) {
|
2022-02-02 03:42:40 +00:00
|
|
|
int fetch_default = r->settings.fetch_negotiation_algorithm;
|
2019-08-13 18:37:48 +00:00
|
|
|
if (!strcasecmp(strval, "skipping"))
|
|
|
|
|
r->settings.fetch_negotiation_algorithm = FETCH_NEGOTIATION_SKIPPING;
|
2020-08-18 04:01:31 +00:00
|
|
|
else if (!strcasecmp(strval, "noop"))
|
|
|
|
|
r->settings.fetch_negotiation_algorithm = FETCH_NEGOTIATION_NOOP;
|
2022-02-02 03:42:40 +00:00
|
|
|
else if (!strcasecmp(strval, "consecutive"))
|
|
|
|
|
r->settings.fetch_negotiation_algorithm = FETCH_NEGOTIATION_CONSECUTIVE;
|
repo-settings: fix checking for fetch.negotiationAlgorithm=default
In commit 3050b6dfc75d (repo-settings.c: simplify the setup,
2021-09-21), the branch for handling fetch.negotiationAlgorithm=default
was deleted. Since this value is documented in
Documentation/config/fetch.txt, restore the check for this value.
Note that this change caused an observable bug: if someone sets
feature.experimental=true in config, and then passes "-c
fetch.negotiationAlgorithm=default" on the command line in an attempt to
override the config, then the override is ignored. Fix the bug by not
ignoring the value of "default".
Technically, before commit 3050b6dfc75d, repo-settings would treat any
fetch.negotiationAlgorithm value other than "skipping" or "noop" as a
request for "default", but I think it probably makes more sense to
ignore such broken requests and leave fetch.negotiationAlgorithm with
the default value rather than the value of "default". (If that sounds
confusing, note that "default" is usually the default value, but when
feature.experimental=true, "skipping" is the default value.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-02 03:42:38 +00:00
|
|
|
else if (!strcasecmp(strval, "default"))
|
2022-02-02 03:42:40 +00:00
|
|
|
r->settings.fetch_negotiation_algorithm = fetch_default;
|
2022-02-02 03:42:39 +00:00
|
|
|
else
|
|
|
|
|
die("unknown fetch negotiation algorithm '%s'", strval);
|
2019-08-13 18:37:48 +00:00
|
|
|
}
|
|
|
|
|
|
2021-03-30 13:10:47 +00:00
|
|
|
/*
|
|
|
|
|
* This setting guards all index reads to require a full index
|
|
|
|
|
* over a sparse index. After suitable guards are placed in the
|
|
|
|
|
* codebase around uses of the index, this setting will be
|
|
|
|
|
* removed.
|
|
|
|
|
*/
|
|
|
|
|
r->settings.command_requires_full_index = 1;
|
2019-08-13 18:37:43 +00:00
|
|
|
}
|