git/t/t7110-reset-merge.sh

297 lines
9.8 KiB
Bash
Raw Normal View History

#!/bin/sh
#
# Copyright (c) 2009 Christian Couder
#
test_description='Tests for "git reset" with "--merge" and "--keep" options'
leak tests: mark passing SANITIZE=leak tests as leak-free Mark those remaining tests that pass when run under SANITIZE=leak with TEST_PASSES_SANITIZE_LEAK=true, these were either omitted in f346fcb62a0 (Merge branch 'ab/mark-leak-free-tests-even-more', 2021-12-15) and 5a4f8381b68 (Merge branch 'ab/mark-leak-free-tests', 2021-10-25), or have had their memory leaks fixed since then. With this change there's now a a one-to-one mapping between those tests that we have opted-in via "TEST_PASSES_SANITIZE_LEAK=true", and those that pass with the new "check" mode: GIT_TEST_PASSING_SANITIZE_LEAK=check \ GIT_TEST_SANITIZE_LEAK_LOG=true \ make test SANITIZE=leak Note that the "GIT_TEST_SANITIZE_LEAK_LOG=true" is needed due to the edge cases noted in a preceding commit, i.e. in some cases we'd pass the test itself, but still have outstanding leaks due to ignored exit codes. The "GIT_TEST_SANITIZE_LEAK_LOG=true" corrects for that, we're only marking those tests as passing that really don't have any leaks, whether that was reflected in their exit code or not. Note that the change here to "t9100-git-svn-basic.sh" is marking that test as passing under SANITIZE=leak, we're removing a "TEST_FAILS_SANITIZE_LEAK=true" line, not "TEST_PASSES_SANITIZE_LEAK=true". See 7a98d9ab00d (revisions API: have release_revisions() release "cmdline", 2022-04-13) for the introduction of that t/lib-git-svn.sh-specific variable. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-07-27 23:13:41 +00:00
TEST_PASSES_SANITIZE_LEAK=true
. ./test-lib.sh
test_expect_success setup '
printf "line %d\n" 1 2 3 >file1 &&
cat file1 >file2 &&
git add file1 file2 &&
test_tick &&
git commit -m "Initial commit" &&
git tag initial &&
echo line 4 >>file1 &&
cat file1 >file2 &&
test_tick &&
git commit -m "add line 4 to file1" file1 &&
git tag second
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: C C C D --merge D D D
# file2: C D D D --merge C D D
test_expect_success 'reset --merge is ok with changes in file it does not touch' '
git reset --merge HEAD^ &&
! grep 4 file1 &&
grep 4 file2 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" &&
test -z "$(git diff --cached)"
'
test_expect_success 'reset --merge is ok when switching back' '
git reset --merge second &&
grep 4 file1 &&
grep 4 file2 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse second)" &&
test -z "$(git diff --cached)"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: C C C D --keep D D D
# file2: C D D D --keep C D D
test_expect_success 'reset --keep is ok with changes in file it does not touch' '
git reset --hard second &&
cat file1 >file2 &&
git reset --keep HEAD^ &&
! grep 4 file1 &&
grep 4 file2 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" &&
test -z "$(git diff --cached)"
'
test_expect_success 'reset --keep is ok when switching back' '
git reset --keep second &&
grep 4 file1 &&
grep 4 file2 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse second)" &&
test -z "$(git diff --cached)"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: B B C D --merge D D D
# file2: C D D D --merge C D D
test_expect_success 'reset --merge discards changes added to index (1)' '
git reset --hard second &&
cat file1 >file2 &&
echo "line 5" >> file1 &&
git add file1 &&
git reset --merge HEAD^ &&
! grep 4 file1 &&
! grep 5 file1 &&
grep 4 file2 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" &&
test -z "$(git diff --cached)"
'
test_expect_success 'reset --merge is ok again when switching back (1)' '
git reset --hard initial &&
echo "line 5" >> file2 &&
git add file2 &&
git reset --merge second &&
! grep 4 file2 &&
! grep 5 file1 &&
grep 4 file1 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse second)" &&
test -z "$(git diff --cached)"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: B B C D --keep (disallowed)
test_expect_success 'reset --keep fails with changes in index in files it touches' '
git reset --hard second &&
echo "line 5" >> file1 &&
git add file1 &&
test_must_fail git reset --keep HEAD^
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: C C C D --merge D D D
# file2: C C D D --merge D D D
test_expect_success 'reset --merge discards changes added to index (2)' '
git reset --hard second &&
echo "line 4" >> file2 &&
git add file2 &&
git reset --merge HEAD^ &&
! grep 4 file2 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" &&
test -z "$(git diff)" &&
test -z "$(git diff --cached)"
'
test_expect_success 'reset --merge is ok again when switching back (2)' '
git reset --hard initial &&
git reset --merge second &&
! grep 4 file2 &&
grep 4 file1 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse second)" &&
test -z "$(git diff --cached)"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: C C C D --keep D D D
# file2: C C D D --keep C D D
test_expect_success 'reset --keep keeps changes it does not touch' '
git reset --hard second &&
echo "line 4" >> file2 &&
git add file2 &&
git reset --keep HEAD^ &&
grep 4 file2 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" &&
test -z "$(git diff --cached)"
'
test_expect_success 'reset --keep keeps changes when switching back' '
git reset --keep second &&
grep 4 file2 &&
grep 4 file1 &&
test "$(git rev-parse HEAD)" = "$(git rev-parse second)" &&
test -z "$(git diff --cached)"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: A B B C --merge (disallowed)
test_expect_success 'reset --merge fails with changes in file it touches' '
git reset --hard second &&
echo "line 5" >> file1 &&
test_tick &&
git commit -m "add line 5" file1 &&
sed -e "s/line 1/changed line 1/" <file1 >file3 &&
mv file3 file1 &&
test_must_fail git reset --merge HEAD^ 2>err.log &&
grep file1 err.log | grep "not uptodate"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: A B B C --keep (disallowed)
test_expect_success 'reset --keep fails with changes in file it touches' '
git reset --hard second &&
echo "line 5" >> file1 &&
test_tick &&
git commit -m "add line 5" file1 &&
sed -e "s/line 1/changed line 1/" <file1 >file3 &&
mv file3 file1 &&
test_must_fail git reset --keep HEAD^ 2>err.log &&
grep file1 err.log | grep "not uptodate"
'
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
test_expect_success 'setup 3 different branches' '
git reset --hard second &&
git branch branch1 &&
git branch branch2 &&
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
git branch branch3 &&
git checkout branch1 &&
echo "line 5 in branch1" >> file1 &&
test_tick &&
git commit -a -m "change in branch1" &&
git checkout branch2 &&
echo "line 5 in branch2" >> file1 &&
test_tick &&
git commit -a -m "change in branch2" &&
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
git tag third &&
git checkout branch3 &&
echo a new file >file3 &&
rm -f file1 &&
git add file3 &&
test_tick &&
git commit -a -m "change in branch3"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
# file1: X U B C --merge C C C
test_expect_success '"reset --merge HEAD^" is ok with pending merge' '
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
git checkout third &&
test_must_fail git merge branch1 &&
git reset --merge HEAD^ &&
test "$(git rev-parse HEAD)" = "$(git rev-parse second)" &&
test -z "$(git diff --cached)" &&
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
test -z "$(git diff)"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: X U B C --keep (disallowed)
test_expect_success '"reset --keep HEAD^" fails with pending merge' '
git reset --hard third &&
test_must_fail git merge branch1 &&
test_must_fail git reset --keep HEAD^ 2>err.log &&
test_i18ngrep "middle of a merge" err.log
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
# file1: X U B B --merge B B B
test_expect_success '"reset --merge HEAD" is ok with pending merge' '
git reset --hard third &&
test_must_fail git merge branch1 &&
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
git reset --merge HEAD &&
test "$(git rev-parse HEAD)" = "$(git rev-parse third)" &&
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
test -z "$(git diff --cached)" &&
test -z "$(git diff)"
'
# The next test will test the following:
#
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: X U B B --keep (disallowed)
test_expect_success '"reset --keep HEAD" fails with pending merge' '
git reset --hard third &&
test_must_fail git merge branch1 &&
test_must_fail git reset --keep HEAD 2>err.log &&
test_i18ngrep "middle of a merge" err.log
'
test_expect_success '--merge is ok with added/deleted merge' '
"reset --merge": fix unmerged case Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-01 07:04:04 +00:00
git reset --hard third &&
rm -f file2 &&
test_must_fail git merge branch3 &&
! test -f file2 &&
test -f file3 &&
git diff --exit-code file3 &&
git diff --exit-code branch3 file3 &&
git reset --merge HEAD &&
! test -f file3 &&
! test -f file2 &&
git diff --exit-code --cached
'
test_expect_success '--keep fails with added/deleted merge' '
git reset --hard third &&
rm -f file2 &&
test_must_fail git merge branch3 &&
! test -f file2 &&
test -f file3 &&
git diff --exit-code file3 &&
git diff --exit-code branch3 file3 &&
test_must_fail git reset --keep HEAD 2>err.log &&
test_i18ngrep "middle of a merge" err.log
'
test_done