git/t/t7004-tag.sh

1369 lines
36 KiB
Bash
Raw Normal View History

#!/bin/sh
#
# Copyright (c) 2007 Carlos Rica
#
test_description='git tag
Tests for operations with tags.'
. ./test-lib.sh
. "$TEST_DIRECTORY"/lib-gpg.sh
# creating and listing lightweight tags:
tag_exists () {
git show-ref --quiet --verify refs/tags/"$1"
}
# todo: git tag -l now returns always zero, when fixed, change this test
test_expect_success 'listing all tags in an empty tree should succeed' '
git tag -l &&
git tag
'
test_expect_success 'listing all tags in an empty tree should output nothing' '
test `git tag -l | wc -l` -eq 0 &&
test `git tag | wc -l` -eq 0
'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 09:50:53 +00:00
test_expect_success 'looking for a tag in an empty tree should fail' \
'! (tag_exists mytag)'
test_expect_success 'creating a tag in an empty tree should fail' '
test_must_fail git tag mynotag &&
! tag_exists mynotag
'
test_expect_success 'creating a tag for HEAD in an empty tree should fail' '
test_must_fail git tag mytaghead HEAD &&
! tag_exists mytaghead
'
test_expect_success 'creating a tag for an unknown revision should fail' '
test_must_fail git tag mytagnorev aaaaaaaaaaa &&
! tag_exists mytagnorev
'
# commit used in the tests, test_tick is also called here to freeze the date:
test_expect_success 'creating a tag using default HEAD should succeed' '
test_tick &&
echo foo >foo &&
git add foo &&
git commit -m Foo &&
git tag mytag
'
test_expect_success 'listing all tags if one exists should succeed' '
git tag -l &&
git tag
'
test_expect_success 'listing all tags if one exists should output that tag' '
test `git tag -l` = mytag &&
test `git tag` = mytag
'
# pattern matching:
test_expect_success 'listing a tag using a matching pattern should succeed' \
'git tag -l mytag'
test_expect_success \
'listing a tag using a matching pattern should output that tag' \
'test `git tag -l mytag` = mytag'
# todo: git tag -l now returns always zero, when fixed, change this test
test_expect_success \
'listing tags using a non-matching pattern should suceed' \
'git tag -l xxx'
test_expect_success \
'listing tags using a non-matching pattern should output nothing' \
'test `git tag -l xxx | wc -l` -eq 0'
# special cases for creating tags:
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 09:50:53 +00:00
test_expect_success \
'trying to create a tag with the name of one existing should fail' \
'test_must_fail git tag mytag'
test_expect_success \
'trying to create a tag with a non-valid name should fail' '
test `git tag -l | wc -l` -eq 1 &&
test_must_fail git tag "" &&
test_must_fail git tag .othertag &&
test_must_fail git tag "other tag" &&
test_must_fail git tag "othertag^" &&
test_must_fail git tag "other~tag" &&
test `git tag -l | wc -l` -eq 1
'
test_expect_success 'creating a tag using HEAD directly should succeed' '
git tag myhead HEAD &&
tag_exists myhead
'
# deleting tags:
test_expect_success 'trying to delete an unknown tag should fail' '
! tag_exists unknown-tag &&
test_must_fail git tag -d unknown-tag
'
cat >expect <<EOF
myhead
mytag
EOF
test_expect_success \
'trying to delete tags without params should succeed and do nothing' '
git tag -l > actual && test_cmp expect actual &&
git tag -d &&
git tag -l > actual && test_cmp expect actual
'
test_expect_success \
'deleting two existing tags in one command should succeed' '
tag_exists mytag &&
tag_exists myhead &&
git tag -d mytag myhead &&
! tag_exists mytag &&
! tag_exists myhead
'
test_expect_success \
'creating a tag with the name of another deleted one should succeed' '
! tag_exists mytag &&
git tag mytag &&
tag_exists mytag
'
test_expect_success \
'trying to delete two tags, existing and not, should fail in the 2nd' '
tag_exists mytag &&
! tag_exists myhead &&
test_must_fail git tag -d mytag anothertag &&
! tag_exists mytag &&
! tag_exists myhead
'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 09:50:53 +00:00
test_expect_success 'trying to delete an already deleted tag should fail' \
'test_must_fail git tag -d mytag'
# listing various tags with pattern matching:
cat >expect <<EOF
a1
aa1
cba
t210
t211
v0.2.1
v1.0
v1.0.1
v1.1.3
EOF
test_expect_success 'listing all tags should print them ordered' '
git tag v1.0.1 &&
git tag t211 &&
git tag aa1 &&
git tag v0.2.1 &&
git tag v1.1.3 &&
git tag cba &&
git tag a1 &&
git tag v1.0 &&
git tag t210 &&
git tag -l > actual &&
test_cmp expect actual &&
git tag > actual &&
test_cmp expect actual
'
cat >expect <<EOF
a1
aa1
cba
EOF
test_expect_success \
'listing tags with substring as pattern must print those matching' '
rm *a* &&
git tag -l "*a*" > current &&
test_cmp expect current
'
cat >expect <<EOF
v0.2.1
v1.0.1
EOF
test_expect_success \
'listing tags with a suffix as pattern must print those matching' '
git tag -l "*.1" > actual &&
test_cmp expect actual
'
cat >expect <<EOF
t210
t211
EOF
test_expect_success \
'listing tags with a prefix as pattern must print those matching' '
git tag -l "t21*" > actual &&
test_cmp expect actual
'
cat >expect <<EOF
a1
EOF
test_expect_success \
'listing tags using a name as pattern must print that one matching' '
git tag -l a1 > actual &&
test_cmp expect actual
'
cat >expect <<EOF
v1.0
EOF
test_expect_success \
'listing tags using a name as pattern must print that one matching' '
git tag -l v1.0 > actual &&
test_cmp expect actual
'
cat >expect <<EOF
v1.0.1
v1.1.3
EOF
test_expect_success \
'listing tags with ? in the pattern should print those matching' '
git tag -l "v1.?.?" > actual &&
test_cmp expect actual
'
>expect
test_expect_success \
'listing tags using v.* should print nothing because none have v.' '
git tag -l "v.*" > actual &&
test_cmp expect actual
'
cat >expect <<EOF
v0.2.1
v1.0
v1.0.1
v1.1.3
EOF
test_expect_success \
'listing tags using v* should print only those having v' '
git tag -l "v*" > actual &&
test_cmp expect actual
'
test_expect_success 'tag -l can accept multiple patterns' '
git tag -l "v1*" "v0*" >actual &&
test_cmp expect actual
'
test_expect_success 'listing tags in column' '
COLUMNS=40 git tag -l --column=row >actual &&
cat >expected <<\EOF &&
a1 aa1 cba t210 t211
v0.2.1 v1.0 v1.0.1 v1.1.3
EOF
test_cmp expected actual
'
test_expect_success 'listing tags in column with column.*' '
git config column.tag row &&
git config column.ui dense &&
COLUMNS=40 git tag -l >actual &&
git config --unset column.ui &&
git config --unset column.tag &&
cat >expected <<\EOF &&
a1 aa1 cba t210 t211
v0.2.1 v1.0 v1.0.1 v1.1.3
EOF
test_cmp expected actual
'
test_expect_success 'listing tag with -n --column should fail' '
test_must_fail git tag --column -n
'
test_expect_success 'listing tags -n in column with column.ui ignored' '
git config column.ui "row dense" &&
COLUMNS=40 git tag -l -n >actual &&
git config --unset column.ui &&
cat >expected <<\EOF &&
a1 Foo
aa1 Foo
cba Foo
t210 Foo
t211 Foo
v0.2.1 Foo
v1.0 Foo
v1.0.1 Foo
v1.1.3 Foo
EOF
test_cmp expected actual
'
# creating and verifying lightweight tags:
test_expect_success \
'a non-annotated tag created without parameters should point to HEAD' '
git tag non-annotated-tag &&
test $(git cat-file -t non-annotated-tag) = commit &&
test $(git rev-parse non-annotated-tag) = $(git rev-parse HEAD)
'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 09:50:53 +00:00
test_expect_success 'trying to verify an unknown tag should fail' \
'test_must_fail git tag -v unknown-tag'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 09:50:53 +00:00
test_expect_success \
'trying to verify a non-annotated and non-signed tag should fail' \
'test_must_fail git tag -v non-annotated-tag'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 09:50:53 +00:00
test_expect_success \
'trying to verify many non-annotated or unknown tags, should fail' \
'test_must_fail git tag -v unknown-tag1 non-annotated-tag unknown-tag2'
# creating annotated tags:
get_tag_msg () {
git cat-file tag "$1" | sed -e "/BEGIN PGP/q"
}
# run test_tick before committing always gives the time in that timezone
get_tag_header () {
cat <<EOF
object $2
type $3
tag $1
tagger C O Mitter <committer@example.com> $4 -0700
EOF
}
commit=$(git rev-parse HEAD)
time=$test_tick
get_tag_header annotated-tag $commit commit $time >expect
echo "A message" >>expect
test_expect_success \
'creating an annotated tag with -m message should succeed' '
git tag -m "A message" annotated-tag &&
get_tag_msg annotated-tag >actual &&
test_cmp expect actual
'
cat >msgfile <<EOF
Another message
in a file.
EOF
get_tag_header file-annotated-tag $commit commit $time >expect
cat msgfile >>expect
test_expect_success \
'creating an annotated tag with -F messagefile should succeed' '
git tag -F msgfile file-annotated-tag &&
get_tag_msg file-annotated-tag >actual &&
test_cmp expect actual
'
cat >inputmsg <<EOF
A message from the
standard input
EOF
get_tag_header stdin-annotated-tag $commit commit $time >expect
cat inputmsg >>expect
test_expect_success 'creating an annotated tag with -F - should succeed' '
git tag -F - stdin-annotated-tag <inputmsg &&
get_tag_msg stdin-annotated-tag >actual &&
test_cmp expect actual
'
test_expect_success \
'trying to create a tag with a non-existing -F file should fail' '
! test -f nonexistingfile &&
! tag_exists notag &&
test_must_fail git tag -F nonexistingfile notag &&
! tag_exists notag
'
test_expect_success \
'trying to create tags giving both -m or -F options should fail' '
echo "message file 1" >msgfile1 &&
echo "message file 2" >msgfile2 &&
! tag_exists msgtag &&
test_must_fail git tag -m "message 1" -F msgfile1 msgtag &&
! tag_exists msgtag &&
test_must_fail git tag -F msgfile1 -m "message 1" msgtag &&
! tag_exists msgtag &&
test_must_fail git tag -m "message 1" -F msgfile1 \
-m "message 2" msgtag &&
! tag_exists msgtag
'
# blank and empty messages:
get_tag_header empty-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with an empty -m message should succeed' '
git tag -m "" empty-annotated-tag &&
get_tag_msg empty-annotated-tag >actual &&
test_cmp expect actual
'
>emptyfile
get_tag_header emptyfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with an empty -F messagefile should succeed' '
git tag -F emptyfile emptyfile-annotated-tag &&
get_tag_msg emptyfile-annotated-tag >actual &&
test_cmp expect actual
'
printf '\n\n \n\t\nLeading blank lines\n' >blanksfile
printf '\n\t \t \nRepeated blank lines\n' >>blanksfile
printf '\n\n\nTrailing spaces \t \n' >>blanksfile
printf '\nTrailing blank lines\n\n\t \n\n' >>blanksfile
get_tag_header blanks-annotated-tag $commit commit $time >expect
cat >>expect <<EOF
Leading blank lines
Repeated blank lines
Trailing spaces
Trailing blank lines
EOF
test_expect_success \
'extra blanks in the message for an annotated tag should be removed' '
git tag -F blanksfile blanks-annotated-tag &&
get_tag_msg blanks-annotated-tag >actual &&
test_cmp expect actual
'
get_tag_header blank-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with blank -m message with spaces should succeed' '
git tag -m " " blank-annotated-tag &&
get_tag_msg blank-annotated-tag >actual &&
test_cmp expect actual
'
echo ' ' >blankfile
echo '' >>blankfile
echo ' ' >>blankfile
get_tag_header blankfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with blank -F messagefile with spaces should succeed' '
git tag -F blankfile blankfile-annotated-tag &&
get_tag_msg blankfile-annotated-tag >actual &&
test_cmp expect actual
'
printf ' ' >blanknonlfile
get_tag_header blanknonlfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with -F file of spaces and no newline should succeed' '
git tag -F blanknonlfile blanknonlfile-annotated-tag &&
get_tag_msg blanknonlfile-annotated-tag >actual &&
test_cmp expect actual
'
# messages with commented lines:
cat >commentsfile <<EOF
# A comment
############
The message.
############
One line.
# commented lines
# commented lines
Another line.
# comments
Last line.
EOF
get_tag_header comments-annotated-tag $commit commit $time >expect
cat >>expect <<EOF
The message.
One line.
Another line.
Last line.
EOF
test_expect_success \
'creating a tag using a -F messagefile with #comments should succeed' '
git tag -F commentsfile comments-annotated-tag &&
get_tag_msg comments-annotated-tag >actual &&
test_cmp expect actual
'
get_tag_header comment-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with a #comment in the -m message should succeed' '
git tag -m "#comment" comment-annotated-tag &&
get_tag_msg comment-annotated-tag >actual &&
test_cmp expect actual
'
echo '#comment' >commentfile
echo '' >>commentfile
echo '####' >>commentfile
get_tag_header commentfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with #comments in the -F messagefile should succeed' '
git tag -F commentfile commentfile-annotated-tag &&
get_tag_msg commentfile-annotated-tag >actual &&
test_cmp expect actual
'
printf '#comment' >commentnonlfile
get_tag_header commentnonlfile-annotated-tag $commit commit $time >expect
test_expect_success \
'creating a tag with a file of #comment and no newline should succeed' '
git tag -F commentnonlfile commentnonlfile-annotated-tag &&
get_tag_msg commentnonlfile-annotated-tag >actual &&
test_cmp expect actual
'
# listing messages for annotated non-signed tags:
test_expect_success \
'listing the one-line message of a non-signed tag should succeed' '
git tag -m "A msg" tag-one-line &&
echo "tag-one-line" >expect &&
git tag -l | grep "^tag-one-line" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^tag-one-line" >actual &&
test_cmp expect actual &&
git tag -n0 -l tag-one-line >actual &&
test_cmp expect actual &&
echo "tag-one-line A msg" >expect &&
git tag -n1 -l | grep "^tag-one-line" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^tag-one-line" >actual &&
test_cmp expect actual &&
git tag -n1 -l tag-one-line >actual &&
test_cmp expect actual &&
git tag -n2 -l tag-one-line >actual &&
test_cmp expect actual &&
git tag -n999 -l tag-one-line >actual &&
test_cmp expect actual
'
test_expect_success \
'listing the zero-lines message of a non-signed tag should succeed' '
git tag -m "" tag-zero-lines &&
echo "tag-zero-lines" >expect &&
git tag -l | grep "^tag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^tag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l tag-zero-lines >actual &&
test_cmp expect actual &&
echo "tag-zero-lines " >expect &&
git tag -n1 -l | grep "^tag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^tag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n1 -l tag-zero-lines >actual &&
test_cmp expect actual &&
git tag -n2 -l tag-zero-lines >actual &&
test_cmp expect actual &&
git tag -n999 -l tag-zero-lines >actual &&
test_cmp expect actual
'
echo 'tag line one' >annotagmsg
echo 'tag line two' >>annotagmsg
echo 'tag line three' >>annotagmsg
test_expect_success \
'listing many message lines of a non-signed tag should succeed' '
git tag -F annotagmsg tag-lines &&
echo "tag-lines" >expect &&
git tag -l | grep "^tag-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^tag-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l tag-lines >actual &&
test_cmp expect actual &&
echo "tag-lines tag line one" >expect &&
git tag -n1 -l | grep "^tag-lines" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^tag-lines" >actual &&
test_cmp expect actual &&
git tag -n1 -l tag-lines >actual &&
test_cmp expect actual &&
echo " tag line two" >>expect &&
git tag -n2 -l | grep "^ *tag.line" >actual &&
test_cmp expect actual &&
git tag -n2 -l tag-lines >actual &&
test_cmp expect actual &&
echo " tag line three" >>expect &&
git tag -n3 -l | grep "^ *tag.line" >actual &&
test_cmp expect actual &&
git tag -n3 -l tag-lines >actual &&
test_cmp expect actual &&
git tag -n4 -l | grep "^ *tag.line" >actual &&
test_cmp expect actual &&
git tag -n4 -l tag-lines >actual &&
test_cmp expect actual &&
git tag -n99 -l | grep "^ *tag.line" >actual &&
test_cmp expect actual &&
git tag -n99 -l tag-lines >actual &&
test_cmp expect actual
'
test_expect_success 'annotations for blobs are empty' '
blob=$(git hash-object -w --stdin <<-\EOF
Blob paragraph 1.
Blob paragraph 2.
EOF
) &&
git tag tag-blob $blob &&
echo "tag-blob " >expect &&
git tag -n1 -l tag-blob >actual &&
test_cmp expect actual
'
# trying to verify annotated non-signed tags:
test_expect_success GPG \
'trying to verify an annotated non-signed tag should fail' '
tag_exists annotated-tag &&
test_must_fail git tag -v annotated-tag
'
test_expect_success GPG \
'trying to verify a file-annotated non-signed tag should fail' '
tag_exists file-annotated-tag &&
test_must_fail git tag -v file-annotated-tag
'
test_expect_success GPG \
'trying to verify two annotated non-signed tags should fail' '
tag_exists annotated-tag file-annotated-tag &&
test_must_fail git tag -v annotated-tag file-annotated-tag
'
# creating and verifying signed tags:
get_tag_header signed-tag $commit commit $time >expect
echo 'A signed tag message' >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG 'creating a signed tag with -m message should succeed' '
git tag -s -m "A signed tag message" signed-tag &&
get_tag_msg signed-tag >actual &&
test_cmp expect actual
'
get_tag_header u-signed-tag $commit commit $time >expect
echo 'Another message' >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG 'sign with a given key id' '
git tag -u committer@example.com -m "Another message" u-signed-tag &&
get_tag_msg u-signed-tag >actual &&
test_cmp expect actual
'
test_expect_success GPG 'sign with an unknown id (1)' '
test_must_fail git tag -u author@example.com \
-m "Another message" o-signed-tag
'
test_expect_success GPG 'sign with an unknown id (2)' '
test_must_fail git tag -u DEADBEEF -m "Another message" o-signed-tag
'
cat >fakeeditor <<'EOF'
#!/bin/sh
test -n "$1" && exec >"$1"
echo A signed tag message
echo from a fake editor.
EOF
chmod +x fakeeditor
get_tag_header implied-sign $commit commit $time >expect
./fakeeditor >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG '-u implies signed tag' '
GIT_EDITOR=./fakeeditor git tag -u CDDE430D implied-sign &&
get_tag_msg implied-sign >actual &&
test_cmp expect actual
'
cat >sigmsgfile <<EOF
Another signed tag
message in a file.
EOF
get_tag_header file-signed-tag $commit commit $time >expect
cat sigmsgfile >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with -F messagefile should succeed' '
git tag -s -F sigmsgfile file-signed-tag &&
get_tag_msg file-signed-tag >actual &&
test_cmp expect actual
'
cat >siginputmsg <<EOF
A signed tag message from
the standard input
EOF
get_tag_header stdin-signed-tag $commit commit $time >expect
cat siginputmsg >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG 'creating a signed tag with -F - should succeed' '
git tag -s -F - stdin-signed-tag <siginputmsg &&
get_tag_msg stdin-signed-tag >actual &&
test_cmp expect actual
'
get_tag_header implied-annotate $commit commit $time >expect
./fakeeditor >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG '-s implies annotated tag' '
GIT_EDITOR=./fakeeditor git tag -s implied-annotate &&
get_tag_msg implied-annotate >actual &&
test_cmp expect actual
'
test_expect_success GPG \
'trying to create a signed tag with non-existing -F file should fail' '
! test -f nonexistingfile &&
! tag_exists nosigtag &&
test_must_fail git tag -s -F nonexistingfile nosigtag &&
! tag_exists nosigtag
'
test_expect_success GPG 'verifying a signed tag should succeed' \
'git tag -v signed-tag'
test_expect_success GPG 'verifying two signed tags in one command should succeed' \
'git tag -v signed-tag file-signed-tag'
test_expect_success GPG \
'verifying many signed and non-signed tags should fail' '
test_must_fail git tag -v signed-tag annotated-tag &&
test_must_fail git tag -v file-annotated-tag file-signed-tag &&
test_must_fail git tag -v annotated-tag \
file-signed-tag file-annotated-tag &&
test_must_fail git tag -v signed-tag annotated-tag file-signed-tag
'
test_expect_success GPG 'verifying a forged tag should fail' '
forged=$(git cat-file tag signed-tag |
sed -e "s/signed-tag/forged-tag/" |
git mktag) &&
git tag forged-tag $forged &&
test_must_fail git tag -v forged-tag
'
# blank and empty messages for signed tags:
get_tag_header empty-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with an empty -m message should succeed' '
git tag -s -m "" empty-signed-tag &&
get_tag_msg empty-signed-tag >actual &&
test_cmp expect actual &&
git tag -v empty-signed-tag
'
>sigemptyfile
get_tag_header emptyfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with an empty -F messagefile should succeed' '
git tag -s -F sigemptyfile emptyfile-signed-tag &&
get_tag_msg emptyfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v emptyfile-signed-tag
'
printf '\n\n \n\t\nLeading blank lines\n' > sigblanksfile
printf '\n\t \t \nRepeated blank lines\n' >>sigblanksfile
printf '\n\n\nTrailing spaces \t \n' >>sigblanksfile
printf '\nTrailing blank lines\n\n\t \n\n' >>sigblanksfile
get_tag_header blanks-signed-tag $commit commit $time >expect
cat >>expect <<EOF
Leading blank lines
Repeated blank lines
Trailing spaces
Trailing blank lines
EOF
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'extra blanks in the message for a signed tag should be removed' '
git tag -s -F sigblanksfile blanks-signed-tag &&
get_tag_msg blanks-signed-tag >actual &&
test_cmp expect actual &&
git tag -v blanks-signed-tag
'
get_tag_header blank-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with a blank -m message should succeed' '
git tag -s -m " " blank-signed-tag &&
get_tag_msg blank-signed-tag >actual &&
test_cmp expect actual &&
git tag -v blank-signed-tag
'
echo ' ' >sigblankfile
echo '' >>sigblankfile
echo ' ' >>sigblankfile
get_tag_header blankfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with blank -F file with spaces should succeed' '
git tag -s -F sigblankfile blankfile-signed-tag &&
get_tag_msg blankfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v blankfile-signed-tag
'
printf ' ' >sigblanknonlfile
get_tag_header blanknonlfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with spaces and no newline should succeed' '
git tag -s -F sigblanknonlfile blanknonlfile-signed-tag &&
get_tag_msg blanknonlfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v signed-tag
'
# messages with commented lines for signed tags:
cat >sigcommentsfile <<EOF
# A comment
############
The message.
############
One line.
# commented lines
# commented lines
Another line.
# comments
Last line.
EOF
get_tag_header comments-signed-tag $commit commit $time >expect
cat >>expect <<EOF
The message.
One line.
Another line.
Last line.
EOF
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with a -F file with #comments should succeed' '
git tag -s -F sigcommentsfile comments-signed-tag &&
get_tag_msg comments-signed-tag >actual &&
test_cmp expect actual &&
git tag -v comments-signed-tag
'
get_tag_header comment-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with #commented -m message should succeed' '
git tag -s -m "#comment" comment-signed-tag &&
get_tag_msg comment-signed-tag >actual &&
test_cmp expect actual &&
git tag -v comment-signed-tag
'
echo '#comment' >sigcommentfile
echo '' >>sigcommentfile
echo '####' >>sigcommentfile
get_tag_header commentfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with #commented -F messagefile should succeed' '
git tag -s -F sigcommentfile commentfile-signed-tag &&
get_tag_msg commentfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v commentfile-signed-tag
'
printf '#comment' >sigcommentnonlfile
get_tag_header commentnonlfile-signed-tag $commit commit $time >expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag with a #comment and no newline should succeed' '
git tag -s -F sigcommentnonlfile commentnonlfile-signed-tag &&
get_tag_msg commentnonlfile-signed-tag >actual &&
test_cmp expect actual &&
git tag -v commentnonlfile-signed-tag
'
# listing messages for signed tags:
test_expect_success GPG \
'listing the one-line message of a signed tag should succeed' '
git tag -s -m "A message line signed" stag-one-line &&
echo "stag-one-line" >expect &&
git tag -l | grep "^stag-one-line" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^stag-one-line" >actual &&
test_cmp expect actual &&
git tag -n0 -l stag-one-line >actual &&
test_cmp expect actual &&
echo "stag-one-line A message line signed" >expect &&
git tag -n1 -l | grep "^stag-one-line" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^stag-one-line" >actual &&
test_cmp expect actual &&
git tag -n1 -l stag-one-line >actual &&
test_cmp expect actual &&
git tag -n2 -l stag-one-line >actual &&
test_cmp expect actual &&
git tag -n999 -l stag-one-line >actual &&
test_cmp expect actual
'
test_expect_success GPG \
'listing the zero-lines message of a signed tag should succeed' '
git tag -s -m "" stag-zero-lines &&
echo "stag-zero-lines" >expect &&
git tag -l | grep "^stag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^stag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l stag-zero-lines >actual &&
test_cmp expect actual &&
echo "stag-zero-lines " >expect &&
git tag -n1 -l | grep "^stag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^stag-zero-lines" >actual &&
test_cmp expect actual &&
git tag -n1 -l stag-zero-lines >actual &&
test_cmp expect actual &&
git tag -n2 -l stag-zero-lines >actual &&
test_cmp expect actual &&
git tag -n999 -l stag-zero-lines >actual &&
test_cmp expect actual
'
echo 'stag line one' >sigtagmsg
echo 'stag line two' >>sigtagmsg
echo 'stag line three' >>sigtagmsg
test_expect_success GPG \
'listing many message lines of a signed tag should succeed' '
git tag -s -F sigtagmsg stag-lines &&
echo "stag-lines" >expect &&
git tag -l | grep "^stag-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l | grep "^stag-lines" >actual &&
test_cmp expect actual &&
git tag -n0 -l stag-lines >actual &&
test_cmp expect actual &&
echo "stag-lines stag line one" >expect &&
git tag -n1 -l | grep "^stag-lines" >actual &&
test_cmp expect actual &&
git tag -n -l | grep "^stag-lines" >actual &&
test_cmp expect actual &&
git tag -n1 -l stag-lines >actual &&
test_cmp expect actual &&
echo " stag line two" >>expect &&
git tag -n2 -l | grep "^ *stag.line" >actual &&
test_cmp expect actual &&
git tag -n2 -l stag-lines >actual &&
test_cmp expect actual &&
echo " stag line three" >>expect &&
git tag -n3 -l | grep "^ *stag.line" >actual &&
test_cmp expect actual &&
git tag -n3 -l stag-lines >actual &&
test_cmp expect actual &&
git tag -n4 -l | grep "^ *stag.line" >actual &&
test_cmp expect actual &&
git tag -n4 -l stag-lines >actual &&
test_cmp expect actual &&
git tag -n99 -l | grep "^ *stag.line" >actual &&
test_cmp expect actual &&
git tag -n99 -l stag-lines >actual &&
test_cmp expect actual
'
# tags pointing to objects different from commits:
tree=$(git rev-parse HEAD^{tree})
blob=$(git rev-parse HEAD:foo)
tag=$(git rev-parse signed-tag 2>/dev/null)
get_tag_header tree-signed-tag $tree tree $time >expect
echo "A message for a tree" >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag pointing to a tree should succeed' '
git tag -s -m "A message for a tree" tree-signed-tag HEAD^{tree} &&
get_tag_msg tree-signed-tag >actual &&
test_cmp expect actual
'
get_tag_header blob-signed-tag $blob blob $time >expect
echo "A message for a blob" >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag pointing to a blob should succeed' '
git tag -s -m "A message for a blob" blob-signed-tag HEAD:foo &&
get_tag_msg blob-signed-tag >actual &&
test_cmp expect actual
'
get_tag_header tag-signed-tag $tag tag $time >expect
echo "A message for another tag" >>expect
echo '-----BEGIN PGP SIGNATURE-----' >>expect
test_expect_success GPG \
'creating a signed tag pointing to another tag should succeed' '
git tag -s -m "A message for another tag" tag-signed-tag signed-tag &&
get_tag_msg tag-signed-tag >actual &&
test_cmp expect actual
'
# usage with rfc1991 signatures
echo "rfc1991" > gpghome/gpg.conf
get_tag_header rfc1991-signed-tag $commit commit $time >expect
echo "RFC1991 signed tag" >>expect
echo '-----BEGIN PGP MESSAGE-----' >>expect
test_expect_success GPG \
'creating a signed tag with rfc1991' '
git tag -s -m "RFC1991 signed tag" rfc1991-signed-tag $commit &&
get_tag_msg rfc1991-signed-tag >actual &&
test_cmp expect actual
'
cat >fakeeditor <<'EOF'
#!/bin/sh
cp "$1" actual
EOF
chmod +x fakeeditor
test_expect_success GPG \
'reediting a signed tag body omits signature' '
echo "RFC1991 signed tag" >expect &&
GIT_EDITOR=./fakeeditor git tag -f -s rfc1991-signed-tag $commit &&
test_cmp expect actual
'
test_expect_success GPG \
'verifying rfc1991 signature' '
git tag -v rfc1991-signed-tag
'
test_expect_success GPG \
'list tag with rfc1991 signature' '
echo "rfc1991-signed-tag RFC1991 signed tag" >expect &&
git tag -l -n1 rfc1991-signed-tag >actual &&
test_cmp expect actual &&
git tag -l -n2 rfc1991-signed-tag >actual &&
test_cmp expect actual &&
git tag -l -n999 rfc1991-signed-tag >actual &&
test_cmp expect actual
'
rm -f gpghome/gpg.conf
test_expect_success GPG \
'verifying rfc1991 signature without --rfc1991' '
git tag -v rfc1991-signed-tag
'
test_expect_success GPG \
'list tag with rfc1991 signature without --rfc1991' '
echo "rfc1991-signed-tag RFC1991 signed tag" >expect &&
git tag -l -n1 rfc1991-signed-tag >actual &&
test_cmp expect actual &&
git tag -l -n2 rfc1991-signed-tag >actual &&
test_cmp expect actual &&
git tag -l -n999 rfc1991-signed-tag >actual &&
test_cmp expect actual
'
test_expect_success GPG \
'reediting a signed tag body omits signature' '
echo "RFC1991 signed tag" >expect &&
GIT_EDITOR=./fakeeditor git tag -f -s rfc1991-signed-tag $commit &&
test_cmp expect actual
'
git-tag -s must fail if gpg cannot sign the tag. Most of this patch code and message was written by Shawn O. Pearce. I made some tests to know what the problem was, and then I changed the code related with the SIGPIPE signal. If the user has misconfigured `user.signingkey` in their .git/config or just doesn't have any secret keys on their keyring and they ask for a signed tag with `git tag -s` we better make sure the resulting tag was actually signed by gpg. Prior versions of builtin git-tag allowed this failure to slip by without error as they were not checking the return value of the finish_command() so they did not notice when gpg exited with an error exit status. They also did not fail if gpg produced an empty output or if read_in_full received an error from the read system call while trying to read the pipe back from gpg. Finally, we did not actually honor any return value from the do_sign function as it returns ssize_t but was being stored into an unsigned long. This caused the compiler to optimize out the die condition, allowing git-tag to continue along and create the tag object. However, when gpg gets a wrong username, it exits before any read was done and then the writing process receives SIGPIPE and program is terminated. By ignoring this signal, anyway, the function write_or_die gets EPIPE from write_in_full and exits returning 0 to the system without a message. Here we better call to write_in_full directly so we can fail printing a message and return safely to the caller. With these issues fixed `git-tag -s` will now fail to create the tag and will report a non-zero exit status to its caller, thereby allowing automated helper scripts to detect (and recover from) failure if gpg is not working properly. Proposed-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-09 00:39:29 +00:00
# try to sign with bad user.signingkey
git config user.signingkey BobTheMouse
test_expect_success GPG \
'git tag -s fails if gpg is misconfigured' \
'test_must_fail git tag -s -m tail tag-gpg-failure'
git-tag -s must fail if gpg cannot sign the tag. Most of this patch code and message was written by Shawn O. Pearce. I made some tests to know what the problem was, and then I changed the code related with the SIGPIPE signal. If the user has misconfigured `user.signingkey` in their .git/config or just doesn't have any secret keys on their keyring and they ask for a signed tag with `git tag -s` we better make sure the resulting tag was actually signed by gpg. Prior versions of builtin git-tag allowed this failure to slip by without error as they were not checking the return value of the finish_command() so they did not notice when gpg exited with an error exit status. They also did not fail if gpg produced an empty output or if read_in_full received an error from the read system call while trying to read the pipe back from gpg. Finally, we did not actually honor any return value from the do_sign function as it returns ssize_t but was being stored into an unsigned long. This caused the compiler to optimize out the die condition, allowing git-tag to continue along and create the tag object. However, when gpg gets a wrong username, it exits before any read was done and then the writing process receives SIGPIPE and program is terminated. By ignoring this signal, anyway, the function write_or_die gets EPIPE from write_in_full and exits returning 0 to the system without a message. Here we better call to write_in_full directly so we can fail printing a message and return safely to the caller. With these issues fixed `git-tag -s` will now fail to create the tag and will report a non-zero exit status to its caller, thereby allowing automated helper scripts to detect (and recover from) failure if gpg is not working properly. Proposed-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-09 00:39:29 +00:00
git config --unset user.signingkey
# try to verify without gpg:
rm -rf gpghome
test_expect_success GPG \
'verify signed tag fails when public key is not present' \
'test_must_fail git tag -v signed-tag'
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 09:50:53 +00:00
test_expect_success \
'git tag -a fails if tag annotation is empty' '
Sane use of test_expect_failure Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-01 09:50:53 +00:00
! (GIT_EDITOR=cat git tag -a initial-comment)
'
test_expect_success \
'message in editor has initial comment' '
! (GIT_EDITOR=cat git tag -a initial-comment > actual)
'
test_expect_success 'message in editor has initial comment: first line' '
# check the first line --- should be empty
echo >first.expect &&
sed -e 1q <actual >first.actual &&
test_i18ncmp first.expect first.actual
'
test_expect_success \
'message in editor has initial comment: remainder' '
# remove commented lines from the remainder -- should be empty
>rest.expect
sed -e 1d -e '/^#/d' <actual >rest.actual &&
test_cmp rest.expect rest.actual
'
get_tag_header reuse $commit commit $time >expect
echo "An annotation to be reused" >> expect
test_expect_success \
'overwriting an annoted tag should use its previous body' '
git tag -a -m "An annotation to be reused" reuse &&
GIT_EDITOR=true git tag -f -a reuse &&
get_tag_msg reuse >actual &&
test_cmp expect actual
'
test_expect_success 'filename for the message is relative to cwd' '
mkdir subdir &&
echo "Tag message in top directory" >msgfile-5 &&
echo "Tag message in sub directory" >subdir/msgfile-5 &&
(
cd subdir &&
git tag -a -F msgfile-5 tag-from-subdir
) &&
git cat-file tag tag-from-subdir | grep "in sub directory"
'
test_expect_success 'filename for the message is relative to cwd' '
echo "Tag message in sub directory" >subdir/msgfile-6 &&
(
cd subdir &&
git tag -a -F msgfile-6 tag-from-subdir-2
) &&
git cat-file tag tag-from-subdir-2 | grep "in sub directory"
'
# create a few more commits to test --contains
hash1=$(git rev-parse HEAD)
test_expect_success 'creating second commit and tag' '
echo foo-2.0 >foo &&
git add foo &&
git commit -m second &&
git tag v2.0
'
hash2=$(git rev-parse HEAD)
test_expect_success 'creating third commit without tag' '
echo foo-dev >foo &&
git add foo &&
git commit -m third
'
hash3=$(git rev-parse HEAD)
# simple linear checks of --continue
cat > expected <<EOF
v0.2.1
v1.0
v1.0.1
v1.1.3
v2.0
EOF
test_expect_success 'checking that first commit is in all tags (hash)' "
git tag -l --contains $hash1 v* >actual &&
test_cmp expected actual
"
# other ways of specifying the commit
test_expect_success 'checking that first commit is in all tags (tag)' "
git tag -l --contains v1.0 v* >actual &&
test_cmp expected actual
"
test_expect_success 'checking that first commit is in all tags (relative)' "
git tag -l --contains HEAD~2 v* >actual &&
test_cmp expected actual
"
cat > expected <<EOF
v2.0
EOF
test_expect_success 'checking that second commit only has one tag' "
git tag -l --contains $hash2 v* >actual &&
test_cmp expected actual
"
cat > expected <<EOF
EOF
test_expect_success 'checking that third commit has no tags' "
git tag -l --contains $hash3 v* >actual &&
test_cmp expected actual
"
# how about a simple merge?
test_expect_success 'creating simple branch' '
git branch stable v2.0 &&
git checkout stable &&
echo foo-3.0 > foo &&
git commit foo -m fourth &&
git tag v3.0
'
hash4=$(git rev-parse HEAD)
cat > expected <<EOF
v3.0
EOF
test_expect_success 'checking that branch head only has one tag' "
git tag -l --contains $hash4 v* >actual &&
test_cmp expected actual
"
test_expect_success 'merging original branch into this branch' '
git merge --strategy=ours master &&
git tag v4.0
'
cat > expected <<EOF
v4.0
EOF
test_expect_success 'checking that original branch head has one tag now' "
git tag -l --contains $hash3 v* >actual &&
test_cmp expected actual
"
cat > expected <<EOF
v0.2.1
v1.0
v1.0.1
v1.1.3
v2.0
v3.0
v4.0
EOF
test_expect_success 'checking that initial commit is in all tags' "
git tag -l --contains $hash1 v* >actual &&
test_cmp expected actual
"
# mixing modes and options:
test_expect_success 'mixing incompatibles modes and options is forbidden' '
test_must_fail git tag -a &&
test_must_fail git tag -l -v &&
test_must_fail git tag -n 100 &&
test_must_fail git tag -l -m msg &&
test_must_fail git tag -l -F some file &&
test_must_fail git tag -v -s
'
# check points-at
test_expect_success '--points-at cannot be used in non-list mode' '
test_must_fail git tag --points-at=v4.0 foo
'
test_expect_success '--points-at finds lightweight tags' '
echo v4.0 >expect &&
git tag --points-at v4.0 >actual &&
test_cmp expect actual
'
test_expect_success '--points-at finds annotated tags of commits' '
git tag -m "v4.0, annotated" annotated-v4.0 v4.0 &&
echo annotated-v4.0 >expect &&
git tag -l --points-at v4.0 "annotated*" >actual &&
test_cmp expect actual
'
test_expect_success '--points-at finds annotated tags of tags' '
git tag -m "describing the v4.0 tag object" \
annotated-again-v4.0 annotated-v4.0 &&
cat >expect <<-\EOF &&
annotated-again-v4.0
annotated-v4.0
EOF
git tag --points-at=annotated-v4.0 >actual &&
test_cmp expect actual
'
test_expect_success 'multiple --points-at are OR-ed together' '
cat >expect <<-\EOF &&
v2.0
v3.0
EOF
git tag --points-at=v2.0 --points-at=v3.0 >actual &&
test_cmp expect actual
'
test_done