pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
#include "cache.h"
|
|
|
|
|
#include "commit.h"
|
|
|
|
|
#include "tag.h"
|
|
|
|
|
#include "diff.h"
|
|
|
|
|
#include "revision.h"
|
|
|
|
|
#include "list-objects.h"
|
|
|
|
|
#include "progress.h"
|
|
|
|
|
#include "pack-revindex.h"
|
|
|
|
|
#include "pack.h"
|
|
|
|
|
#include "pack-bitmap.h"
|
|
|
|
|
#include "sha1-lookup.h"
|
|
|
|
|
#include "pack-objects.h"
|
|
|
|
|
|
|
|
|
|
struct bitmapped_commit {
|
|
|
|
|
struct commit *commit;
|
|
|
|
|
struct ewah_bitmap *bitmap;
|
|
|
|
|
struct ewah_bitmap *write_as;
|
|
|
|
|
int flags;
|
|
|
|
|
int xor_offset;
|
|
|
|
|
uint32_t commit_pos;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct bitmap_writer {
|
|
|
|
|
struct ewah_bitmap *commits;
|
|
|
|
|
struct ewah_bitmap *trees;
|
|
|
|
|
struct ewah_bitmap *blobs;
|
|
|
|
|
struct ewah_bitmap *tags;
|
|
|
|
|
|
|
|
|
|
khash_sha1 *bitmaps;
|
|
|
|
|
khash_sha1 *reused;
|
|
|
|
|
struct packing_data *to_pack;
|
|
|
|
|
|
|
|
|
|
struct bitmapped_commit *selected;
|
|
|
|
|
unsigned int selected_nr, selected_alloc;
|
|
|
|
|
|
|
|
|
|
struct progress *progress;
|
|
|
|
|
int show_progress;
|
|
|
|
|
unsigned char pack_checksum[20];
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static struct bitmap_writer writer;
|
|
|
|
|
|
|
|
|
|
void bitmap_writer_show_progress(int show)
|
|
|
|
|
{
|
|
|
|
|
writer.show_progress = show;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Build the initial type index for the packfile
|
|
|
|
|
*/
|
|
|
|
|
void bitmap_writer_build_type_index(struct pack_idx_entry **index,
|
|
|
|
|
uint32_t index_nr)
|
|
|
|
|
{
|
|
|
|
|
uint32_t i;
|
|
|
|
|
|
|
|
|
|
writer.commits = ewah_new();
|
|
|
|
|
writer.trees = ewah_new();
|
|
|
|
|
writer.blobs = ewah_new();
|
|
|
|
|
writer.tags = ewah_new();
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < index_nr; ++i) {
|
|
|
|
|
struct object_entry *entry = (struct object_entry *)index[i];
|
|
|
|
|
enum object_type real_type;
|
|
|
|
|
|
|
|
|
|
entry->in_pack_pos = i;
|
|
|
|
|
|
|
|
|
|
switch (entry->type) {
|
|
|
|
|
case OBJ_COMMIT:
|
|
|
|
|
case OBJ_TREE:
|
|
|
|
|
case OBJ_BLOB:
|
|
|
|
|
case OBJ_TAG:
|
|
|
|
|
real_type = entry->type;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
2017-05-06 22:10:11 +00:00
|
|
|
real_type = sha1_object_info(entry->idx.oid.hash,
|
|
|
|
|
NULL);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch (real_type) {
|
|
|
|
|
case OBJ_COMMIT:
|
|
|
|
|
ewah_set(writer.commits, i);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case OBJ_TREE:
|
|
|
|
|
ewah_set(writer.trees, i);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case OBJ_BLOB:
|
|
|
|
|
ewah_set(writer.blobs, i);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case OBJ_TAG:
|
|
|
|
|
ewah_set(writer.tags, i);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
|
|
|
|
die("Missing type information for %s (%d/%d)",
|
2017-05-06 22:10:11 +00:00
|
|
|
oid_to_hex(&entry->idx.oid), real_type,
|
|
|
|
|
entry->type);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Compute the actual bitmaps
|
|
|
|
|
*/
|
|
|
|
|
static struct object **seen_objects;
|
|
|
|
|
static unsigned int seen_objects_nr, seen_objects_alloc;
|
|
|
|
|
|
|
|
|
|
static inline void push_bitmapped_commit(struct commit *commit, struct ewah_bitmap *reused)
|
|
|
|
|
{
|
|
|
|
|
if (writer.selected_nr >= writer.selected_alloc) {
|
|
|
|
|
writer.selected_alloc = (writer.selected_alloc + 32) * 2;
|
2014-09-16 18:56:57 +00:00
|
|
|
REALLOC_ARRAY(writer.selected, writer.selected_alloc);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
writer.selected[writer.selected_nr].commit = commit;
|
|
|
|
|
writer.selected[writer.selected_nr].bitmap = reused;
|
|
|
|
|
writer.selected[writer.selected_nr].flags = 0;
|
|
|
|
|
|
|
|
|
|
writer.selected_nr++;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void mark_as_seen(struct object *object)
|
|
|
|
|
{
|
|
|
|
|
ALLOC_GROW(seen_objects, seen_objects_nr + 1, seen_objects_alloc);
|
|
|
|
|
seen_objects[seen_objects_nr++] = object;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void reset_all_seen(void)
|
|
|
|
|
{
|
|
|
|
|
unsigned int i;
|
|
|
|
|
for (i = 0; i < seen_objects_nr; ++i) {
|
|
|
|
|
seen_objects[i]->flags &= ~(SEEN | ADDED | SHOWN);
|
|
|
|
|
}
|
|
|
|
|
seen_objects_nr = 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static uint32_t find_object_pos(const unsigned char *sha1)
|
|
|
|
|
{
|
|
|
|
|
struct object_entry *entry = packlist_find(writer.to_pack, sha1, NULL);
|
|
|
|
|
|
|
|
|
|
if (!entry) {
|
|
|
|
|
die("Failed to write bitmap index. Packfile doesn't have full closure "
|
|
|
|
|
"(object %s is missing)", sha1_to_hex(sha1));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return entry->in_pack_pos;
|
|
|
|
|
}
|
|
|
|
|
|
list-objects: pass full pathname to callbacks
When we find a blob at "a/b/c", we currently pass this to
our show_object_fn callbacks as two components: "a/b/" and
"c". Callbacks which want the full value then call
path_name(), which concatenates the two. But this is an
inefficient interface; the path is a strbuf, and we could
simply append "c" to it temporarily, then roll back the
length, without creating a new copy.
So we could improve this by teaching the callsites of
path_name() this trick (and there are only 3). But we can
also notice that no callback actually cares about the
broken-down representation, and simply pass each callback
the full path "a/b/c" as a string. The callback code becomes
even simpler, then, as we do not have to worry about freeing
an allocated buffer, nor rolling back our modification to
the strbuf.
This is theoretically less efficient, as some callbacks
would not bother to format the final path component. But in
practice this is not measurable. Since we use the same
strbuf over and over, our work to grow it is amortized, and
we really only pay to memcpy a few bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-11 22:28:36 +00:00
|
|
|
static void show_object(struct object *object, const char *name, void *data)
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
{
|
|
|
|
|
struct bitmap *base = data;
|
2015-11-10 02:22:29 +00:00
|
|
|
bitmap_set(base, find_object_pos(object->oid.hash));
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
mark_as_seen(object);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void show_commit(struct commit *commit, void *data)
|
|
|
|
|
{
|
|
|
|
|
mark_as_seen((struct object *)commit);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
add_to_include_set(struct bitmap *base, struct commit *commit)
|
|
|
|
|
{
|
|
|
|
|
khiter_t hash_pos;
|
2015-11-10 02:22:29 +00:00
|
|
|
uint32_t bitmap_pos = find_object_pos(commit->object.oid.hash);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
|
|
|
|
if (bitmap_get(base, bitmap_pos))
|
|
|
|
|
return 0;
|
|
|
|
|
|
2015-11-10 02:22:29 +00:00
|
|
|
hash_pos = kh_get_sha1(writer.bitmaps, commit->object.oid.hash);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
if (hash_pos < kh_end(writer.bitmaps)) {
|
|
|
|
|
struct bitmapped_commit *bc = kh_value(writer.bitmaps, hash_pos);
|
|
|
|
|
bitmap_or_ewah(base, bc->bitmap);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
bitmap_set(base, bitmap_pos);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
should_include(struct commit *commit, void *_data)
|
|
|
|
|
{
|
|
|
|
|
struct bitmap *base = _data;
|
|
|
|
|
|
|
|
|
|
if (!add_to_include_set(base, commit)) {
|
|
|
|
|
struct commit_list *parent = commit->parents;
|
|
|
|
|
|
|
|
|
|
mark_as_seen((struct object *)commit);
|
|
|
|
|
|
|
|
|
|
while (parent) {
|
|
|
|
|
parent->item->object.flags |= SEEN;
|
|
|
|
|
mark_as_seen((struct object *)parent->item);
|
|
|
|
|
parent = parent->next;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void compute_xor_offsets(void)
|
|
|
|
|
{
|
|
|
|
|
static const int MAX_XOR_OFFSET_SEARCH = 10;
|
|
|
|
|
|
|
|
|
|
int i, next = 0;
|
|
|
|
|
|
|
|
|
|
while (next < writer.selected_nr) {
|
|
|
|
|
struct bitmapped_commit *stored = &writer.selected[next];
|
|
|
|
|
|
|
|
|
|
int best_offset = 0;
|
|
|
|
|
struct ewah_bitmap *best_bitmap = stored->bitmap;
|
|
|
|
|
struct ewah_bitmap *test_xor;
|
|
|
|
|
|
|
|
|
|
for (i = 1; i <= MAX_XOR_OFFSET_SEARCH; ++i) {
|
|
|
|
|
int curr = next - i;
|
|
|
|
|
|
|
|
|
|
if (curr < 0)
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
test_xor = ewah_pool_new();
|
|
|
|
|
ewah_xor(writer.selected[curr].bitmap, stored->bitmap, test_xor);
|
|
|
|
|
|
|
|
|
|
if (test_xor->buffer_size < best_bitmap->buffer_size) {
|
|
|
|
|
if (best_bitmap != stored->bitmap)
|
|
|
|
|
ewah_pool_free(best_bitmap);
|
|
|
|
|
|
|
|
|
|
best_bitmap = test_xor;
|
|
|
|
|
best_offset = i;
|
|
|
|
|
} else {
|
|
|
|
|
ewah_pool_free(test_xor);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
stored->xor_offset = best_offset;
|
|
|
|
|
stored->write_as = best_bitmap;
|
|
|
|
|
|
|
|
|
|
next++;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void bitmap_writer_build(struct packing_data *to_pack)
|
|
|
|
|
{
|
|
|
|
|
static const double REUSE_BITMAP_THRESHOLD = 0.2;
|
|
|
|
|
|
|
|
|
|
int i, reuse_after, need_reset;
|
|
|
|
|
struct bitmap *base = bitmap_new();
|
|
|
|
|
struct rev_info revs;
|
|
|
|
|
|
|
|
|
|
writer.bitmaps = kh_init_sha1();
|
|
|
|
|
writer.to_pack = to_pack;
|
|
|
|
|
|
|
|
|
|
if (writer.show_progress)
|
|
|
|
|
writer.progress = start_progress("Building bitmaps", writer.selected_nr);
|
|
|
|
|
|
|
|
|
|
init_revisions(&revs, NULL);
|
|
|
|
|
revs.tag_objects = 1;
|
|
|
|
|
revs.tree_objects = 1;
|
|
|
|
|
revs.blob_objects = 1;
|
|
|
|
|
revs.no_walk = 0;
|
|
|
|
|
|
|
|
|
|
revs.include_check = should_include;
|
|
|
|
|
reset_revision_walk();
|
|
|
|
|
|
|
|
|
|
reuse_after = writer.selected_nr * REUSE_BITMAP_THRESHOLD;
|
|
|
|
|
need_reset = 0;
|
|
|
|
|
|
|
|
|
|
for (i = writer.selected_nr - 1; i >= 0; --i) {
|
|
|
|
|
struct bitmapped_commit *stored;
|
|
|
|
|
struct object *object;
|
|
|
|
|
|
|
|
|
|
khiter_t hash_pos;
|
|
|
|
|
int hash_ret;
|
|
|
|
|
|
|
|
|
|
stored = &writer.selected[i];
|
|
|
|
|
object = (struct object *)stored->commit;
|
|
|
|
|
|
|
|
|
|
if (stored->bitmap == NULL) {
|
|
|
|
|
if (i < writer.selected_nr - 1 &&
|
|
|
|
|
(need_reset ||
|
|
|
|
|
!in_merge_bases(writer.selected[i + 1].commit,
|
|
|
|
|
stored->commit))) {
|
|
|
|
|
bitmap_reset(base);
|
|
|
|
|
reset_all_seen();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
add_pending_object(&revs, object, "");
|
|
|
|
|
revs.include_check_data = base;
|
|
|
|
|
|
|
|
|
|
if (prepare_revision_walk(&revs))
|
|
|
|
|
die("revision walk setup failed");
|
|
|
|
|
|
|
|
|
|
traverse_commit_list(&revs, show_commit, show_object, base);
|
|
|
|
|
|
2017-09-22 23:34:54 +00:00
|
|
|
object_array_clear(&revs.pending);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
|
|
|
|
stored->bitmap = bitmap_to_ewah(base);
|
|
|
|
|
need_reset = 0;
|
|
|
|
|
} else
|
|
|
|
|
need_reset = 1;
|
|
|
|
|
|
|
|
|
|
if (i >= reuse_after)
|
|
|
|
|
stored->flags |= BITMAP_FLAG_REUSE;
|
|
|
|
|
|
2015-11-10 02:22:29 +00:00
|
|
|
hash_pos = kh_put_sha1(writer.bitmaps, object->oid.hash, &hash_ret);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
if (hash_ret == 0)
|
|
|
|
|
die("Duplicate entry when writing index: %s",
|
2015-11-10 02:22:28 +00:00
|
|
|
oid_to_hex(&object->oid));
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
|
|
|
|
kh_value(writer.bitmaps, hash_pos) = stored;
|
|
|
|
|
display_progress(writer.progress, writer.selected_nr - i);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
bitmap_free(base);
|
|
|
|
|
stop_progress(&writer.progress);
|
|
|
|
|
|
|
|
|
|
compute_xor_offsets();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Select the commits that will be bitmapped
|
|
|
|
|
*/
|
|
|
|
|
static inline unsigned int next_commit_index(unsigned int idx)
|
|
|
|
|
{
|
|
|
|
|
static const unsigned int MIN_COMMITS = 100;
|
|
|
|
|
static const unsigned int MAX_COMMITS = 5000;
|
|
|
|
|
|
|
|
|
|
static const unsigned int MUST_REGION = 100;
|
|
|
|
|
static const unsigned int MIN_REGION = 20000;
|
|
|
|
|
|
|
|
|
|
unsigned int offset, next;
|
|
|
|
|
|
|
|
|
|
if (idx <= MUST_REGION)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
if (idx <= MIN_REGION) {
|
|
|
|
|
offset = idx - MUST_REGION;
|
|
|
|
|
return (offset < MIN_COMMITS) ? offset : MIN_COMMITS;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
offset = idx - MIN_REGION;
|
|
|
|
|
next = (offset < MAX_COMMITS) ? offset : MAX_COMMITS;
|
|
|
|
|
|
|
|
|
|
return (next > MIN_COMMITS) ? next : MIN_COMMITS;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int date_compare(const void *_a, const void *_b)
|
|
|
|
|
{
|
|
|
|
|
struct commit *a = *(struct commit **)_a;
|
|
|
|
|
struct commit *b = *(struct commit **)_b;
|
|
|
|
|
return (long)b->date - (long)a->date;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void bitmap_writer_reuse_bitmaps(struct packing_data *to_pack)
|
|
|
|
|
{
|
|
|
|
|
if (prepare_bitmap_git() < 0)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
writer.reused = kh_init_sha1();
|
|
|
|
|
rebuild_existing_bitmaps(to_pack, writer.reused, writer.show_progress);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct ewah_bitmap *find_reused_bitmap(const unsigned char *sha1)
|
|
|
|
|
{
|
|
|
|
|
khiter_t hash_pos;
|
|
|
|
|
|
|
|
|
|
if (!writer.reused)
|
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
|
|
hash_pos = kh_get_sha1(writer.reused, sha1);
|
|
|
|
|
if (hash_pos >= kh_end(writer.reused))
|
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
|
|
return kh_value(writer.reused, hash_pos);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void bitmap_writer_select_commits(struct commit **indexed_commits,
|
|
|
|
|
unsigned int indexed_commits_nr,
|
|
|
|
|
int max_bitmaps)
|
|
|
|
|
{
|
|
|
|
|
unsigned int i = 0, j, next;
|
|
|
|
|
|
2016-09-29 15:27:31 +00:00
|
|
|
QSORT(indexed_commits, indexed_commits_nr, date_compare);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
|
|
|
|
if (writer.show_progress)
|
|
|
|
|
writer.progress = start_progress("Selecting bitmap commits", 0);
|
|
|
|
|
|
|
|
|
|
if (indexed_commits_nr < 100) {
|
|
|
|
|
for (i = 0; i < indexed_commits_nr; ++i)
|
|
|
|
|
push_bitmapped_commit(indexed_commits[i], NULL);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
|
struct ewah_bitmap *reused_bitmap = NULL;
|
|
|
|
|
struct commit *chosen = NULL;
|
|
|
|
|
|
|
|
|
|
next = next_commit_index(i);
|
|
|
|
|
|
|
|
|
|
if (i + next >= indexed_commits_nr)
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
if (max_bitmaps > 0 && writer.selected_nr >= max_bitmaps) {
|
|
|
|
|
writer.selected_nr = max_bitmaps;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (next == 0) {
|
|
|
|
|
chosen = indexed_commits[i];
|
2015-11-10 02:22:29 +00:00
|
|
|
reused_bitmap = find_reused_bitmap(chosen->object.oid.hash);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
} else {
|
|
|
|
|
chosen = indexed_commits[i + next];
|
|
|
|
|
|
|
|
|
|
for (j = 0; j <= next; ++j) {
|
|
|
|
|
struct commit *cm = indexed_commits[i + j];
|
|
|
|
|
|
2015-11-10 02:22:29 +00:00
|
|
|
reused_bitmap = find_reused_bitmap(cm->object.oid.hash);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
if (reused_bitmap || (cm->object.flags & NEEDS_BITMAP) != 0) {
|
|
|
|
|
chosen = cm;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (cm->parents && cm->parents->next)
|
|
|
|
|
chosen = cm;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
push_bitmapped_commit(chosen, reused_bitmap);
|
|
|
|
|
|
|
|
|
|
i += next + 1;
|
|
|
|
|
display_progress(writer.progress, i);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
stop_progress(&writer.progress);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int sha1write_ewah_helper(void *f, const void *buf, size_t len)
|
|
|
|
|
{
|
|
|
|
|
/* sha1write will die on error */
|
|
|
|
|
sha1write(f, buf, len);
|
|
|
|
|
return len;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Write the bitmap index to disk
|
|
|
|
|
*/
|
|
|
|
|
static inline void dump_bitmap(struct sha1file *f, struct ewah_bitmap *bitmap)
|
|
|
|
|
{
|
|
|
|
|
if (ewah_serialize_to(bitmap, sha1write_ewah_helper, f) < 0)
|
|
|
|
|
die("Failed to write bitmap index");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const unsigned char *sha1_access(size_t pos, void *table)
|
|
|
|
|
{
|
|
|
|
|
struct pack_idx_entry **index = table;
|
2017-05-06 22:10:11 +00:00
|
|
|
return index[pos]->oid.hash;
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void write_selected_commits_v1(struct sha1file *f,
|
|
|
|
|
struct pack_idx_entry **index,
|
|
|
|
|
uint32_t index_nr)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < writer.selected_nr; ++i) {
|
|
|
|
|
struct bitmapped_commit *stored = &writer.selected[i];
|
|
|
|
|
|
|
|
|
|
int commit_pos =
|
2015-11-10 02:22:29 +00:00
|
|
|
sha1_pos(stored->commit->object.oid.hash, index, index_nr, sha1_access);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
|
|
|
|
if (commit_pos < 0)
|
|
|
|
|
die("BUG: trying to write commit not in index");
|
|
|
|
|
|
2014-11-27 05:24:01 +00:00
|
|
|
sha1write_be32(f, commit_pos);
|
|
|
|
|
sha1write_u8(f, stored->xor_offset);
|
|
|
|
|
sha1write_u8(f, stored->flags);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
|
|
|
|
dump_bitmap(f, stored->write_as);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
pack-bitmap: implement optional name_hash cache
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:45 +00:00
|
|
|
static void write_hash_cache(struct sha1file *f,
|
|
|
|
|
struct pack_idx_entry **index,
|
|
|
|
|
uint32_t index_nr)
|
|
|
|
|
{
|
|
|
|
|
uint32_t i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < index_nr; ++i) {
|
|
|
|
|
struct object_entry *entry = (struct object_entry *)index[i];
|
|
|
|
|
uint32_t hash_value = htonl(entry->hash);
|
|
|
|
|
sha1write(f, &hash_value, sizeof(hash_value));
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
void bitmap_writer_set_checksum(unsigned char *sha1)
|
|
|
|
|
{
|
|
|
|
|
hashcpy(writer.pack_checksum, sha1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void bitmap_writer_finish(struct pack_idx_entry **index,
|
|
|
|
|
uint32_t index_nr,
|
pack-bitmap: implement optional name_hash cache
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:45 +00:00
|
|
|
const char *filename,
|
|
|
|
|
uint16_t options)
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
{
|
|
|
|
|
static uint16_t default_version = 1;
|
|
|
|
|
static uint16_t flags = BITMAP_OPT_FULL_DAG;
|
2017-03-28 19:45:43 +00:00
|
|
|
struct strbuf tmp_file = STRBUF_INIT;
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
struct sha1file *f;
|
|
|
|
|
|
|
|
|
|
struct bitmap_disk_header header;
|
|
|
|
|
|
2017-03-28 19:45:43 +00:00
|
|
|
int fd = odb_mkstemp(&tmp_file, "pack/tmp_bitmap_XXXXXX");
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
2017-03-28 19:45:43 +00:00
|
|
|
f = sha1fd(fd, tmp_file.buf);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
|
|
|
|
memcpy(header.magic, BITMAP_IDX_SIGNATURE, sizeof(BITMAP_IDX_SIGNATURE));
|
|
|
|
|
header.version = htons(default_version);
|
pack-bitmap: implement optional name_hash cache
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:45 +00:00
|
|
|
header.options = htons(flags | options);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
header.entry_count = htonl(writer.selected_nr);
|
2014-03-03 09:39:59 +00:00
|
|
|
hashcpy(header.checksum, writer.pack_checksum);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
|
|
|
|
|
sha1write(f, &header, sizeof(header));
|
|
|
|
|
dump_bitmap(f, writer.commits);
|
|
|
|
|
dump_bitmap(f, writer.trees);
|
|
|
|
|
dump_bitmap(f, writer.blobs);
|
|
|
|
|
dump_bitmap(f, writer.tags);
|
|
|
|
|
write_selected_commits_v1(f, index, index_nr);
|
|
|
|
|
|
pack-bitmap: implement optional name_hash cache
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:45 +00:00
|
|
|
if (options & BITMAP_OPT_HASH_CACHE)
|
|
|
|
|
write_hash_cache(f, index, index_nr);
|
|
|
|
|
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
sha1close(f, NULL, CSUM_FSYNC);
|
|
|
|
|
|
2017-03-28 19:45:43 +00:00
|
|
|
if (adjust_shared_perm(tmp_file.buf))
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
die_errno("unable to make temporary bitmap file readable");
|
|
|
|
|
|
2017-03-28 19:45:43 +00:00
|
|
|
if (rename(tmp_file.buf, filename))
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
die_errno("unable to rename temporary bitmap file to '%s'", filename);
|
2017-03-28 19:45:43 +00:00
|
|
|
|
|
|
|
|
strbuf_release(&tmp_file);
|
pack-objects: implement bitmap writing
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-21 14:00:16 +00:00
|
|
|
}
|