[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2005 Junio C Hamano
|
|
|
|
*/
|
|
|
|
#include "cache.h"
|
|
|
|
#include "diff.h"
|
|
|
|
#include "diffcore.h"
|
|
|
|
|
2018-09-21 15:57:19 +00:00
|
|
|
static int should_break(struct repository *r,
|
|
|
|
struct diff_filespec *src,
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
struct diff_filespec *dst,
|
|
|
|
int break_score,
|
|
|
|
int *merge_score_p)
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
{
|
|
|
|
/* dst is recorded as a modification of src. Are they so
|
|
|
|
* different that we are better off recording this as a pair
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
* of delete and create?
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
*
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
* There are two criteria used in this algorithm. For the
|
|
|
|
* purposes of helping later rename/copy, we take both delete
|
|
|
|
* and insert into account and estimate the amount of "edit".
|
|
|
|
* If the edit is very large, we break this pair so that
|
|
|
|
* rename/copy can pick the pieces up to match with other
|
|
|
|
* files.
|
|
|
|
*
|
|
|
|
* On the other hand, we would want to ignore inserts for the
|
|
|
|
* pure "complete rewrite" detection. As long as most of the
|
|
|
|
* existing contents were removed from the file, it is a
|
|
|
|
* complete rewrite, and if sizable chunk from the original
|
|
|
|
* still remains in the result, it is not a rewrite. It does
|
|
|
|
* not matter how much or how little new material is added to
|
|
|
|
* the file.
|
|
|
|
*
|
|
|
|
* The score we leave for such a broken filepair uses the
|
|
|
|
* latter definition so that later clean-up stage can find the
|
|
|
|
* pieces that should not have been broken according to the
|
|
|
|
* latter definition after rename/copy runs, and merge the
|
|
|
|
* broken pair that have a score lower than given criteria
|
|
|
|
* back together. The break operation itself happens
|
|
|
|
* according to the former definition.
|
|
|
|
*
|
|
|
|
* The minimum_edit parameter tells us when to break (the
|
|
|
|
* amount of "edit" required for us to consider breaking the
|
|
|
|
* pair). We leave the amount of deletion in *merge_score_p
|
|
|
|
* when we return.
|
|
|
|
*
|
|
|
|
* The value we return is 1 if we want the pair to be broken,
|
|
|
|
* or 0 if we do not.
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
*/
|
2009-03-07 20:02:10 +00:00
|
|
|
unsigned long delta_size, max_size;
|
Fix diffcore-break total breakage
Ok, so on the kernel list, some people noticed that "git log --follow"
doesn't work too well with some files in the x86 merge, because a lot of
files got renamed in very special ways.
In particular, there was a pattern of doing single commits with renames
that looked basically like
- rename "filename.h" -> "filename_64.h"
- create new "filename.c" that includes "filename_32.h" or
"filename_64.h" depending on whether we're 32-bit or 64-bit.
which was preparatory for smushing the two trees together.
Now, there's two issues here:
- "filename.c" *remained*. Yes, it was a rename, but there was a new file
created with the old name in the same commit. This was important,
because we wanted each commit to compile properly, so that it was
bisectable, so splitting the rename into one commit and the "create
helper file" into another was *not* an option.
So we need to break associations where the contents change too much.
Fine. We have the -B flag for that. When we break things up, then the
rename detection will be able to figure out whether there are better
alternatives.
- "git log --follow" didn't with with -B.
Now, the second case was really simple: we use a different "diffopt"
structure for the rename detection than the basic one (which we use for
showing the diffs). So that second case is trivially fixed by a trivial
one-liner that just copies the break_opt values from the "real" diffopts
to the one used for rename following. So now "git log -B --follow" works
fine:
diff --git a/tree-diff.c b/tree-diff.c
index 26bdbdd..7c261fd 100644
--- a/tree-diff.c
+++ b/tree-diff.c
@@ -319,6 +319,7 @@ static void try_to_follow_renames(struct tree_desc *t1, struct tree_desc *t2, co
diff_opts.detect_rename = DIFF_DETECT_RENAME;
diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT;
diff_opts.single_follow = opt->paths[0];
+ diff_opts.break_opt = opt->break_opt;
paths[0] = NULL;
diff_tree_setup_paths(paths, &diff_opts);
if (diff_setup_done(&diff_opts) < 0)
however, the end result does *not* work. Because our diffcore-break.c
logic is totally bogus!
In particular:
- it used to do
if (base_size < MINIMUM_BREAK_SIZE)
return 0; /* we do not break too small filepair */
which basically says "don't bother to break small files". But that
"base_size" is the *smaller* of the two sizes, which means that if some
large file was rewritten into one that just includes another file, we
would look at the (small) result, and decide that it's smaller than the
break size, so it cannot be worth it to break it up! Even if the other
side was ten times bigger and looked *nothing* like the samell file!
That's clearly bogus. I replaced "base_size" with "max_size", so that
we compare the *bigger* of the filepair with the break size.
- It calculated a "merge_score", which was the score needed to merge it
back together if nothing else wanted it. But even if it was *so*
different that we would never want to merge it back, we wouldn't
consider it a break! That makes no sense. So I added
if (*merge_score_p > break_score)
return 1;
to make it clear that if we wouldn't want to merge it at the end, it
was *definitely* a break.
- It compared the whole "extent of damage", counting all inserts and
deletes, but it based this score on the "base_size", and generated the
damage score with
delta_size = src_removed + literal_added;
damage_score = delta_size * MAX_SCORE / base_size;
but that makes no sense either, since quite often, this will result in
a number that is *bigger* than MAX_SCORE! Why? Because base_size is
(again) the smaller of the two files we compare, and when you start out
from a small file and add a lot (or start out from a large file and
remove a lot), the base_size is going to be much smaller than the
damage!
Again, the fix was to replace "base_size" with "max_size", at which
point the damage actually becomes a sane percentage of the whole.
With these changes in place, not only does "git log -B --follow" work for
the case that triggered this in the first place, ie now
git log -B --follow arch/x86/kernel/vmlinux_64.lds.S
actually gives reasonable results. But I also wanted to verify it in
general, by doing a full-history
git log --stat -B -C
on my kernel tree with the old code and the new code.
There's some tweaking to be done, but generally, the new code generates
much better results wrt breaking up files (and then finding better rename
candidates). Here's a few examples of the "--stat" output:
- This:
include/asm-x86/Kbuild | 2 -
include/asm-x86/debugreg.h | 79 +++++++++++++++++++++++++++++++++++------
include/asm-x86/debugreg_32.h | 64 ---------------------------------
include/asm-x86/debugreg_64.h | 65 ---------------------------------
4 files changed, 68 insertions(+), 142 deletions(-)
Becomes:
include/asm-x86/Kbuild | 2 -
include/asm-x86/{debugreg_64.h => debugreg.h} | 9 +++-
include/asm-x86/debugreg_32.h | 64 -------------------------
3 files changed, 7 insertions(+), 68 deletions(-)
- This:
include/asm-x86/bug.h | 41 +++++++++++++++++++++++++++++++++++++++--
include/asm-x86/bug_32.h | 37 -------------------------------------
include/asm-x86/bug_64.h | 34 ----------------------------------
3 files changed, 39 insertions(+), 73 deletions(-)
Becomes
include/asm-x86/{bug_64.h => bug.h} | 20 +++++++++++++-----
include/asm-x86/bug_32.h | 37 -----------------------------------
2 files changed, 14 insertions(+), 43 deletions(-)
Now, in some other cases, it does actually turn a rename into a real
"delete+create" pair, and then the diff is usually bigger, so truth in
advertizing: it doesn't always generate a nicer diff. But for what -B was
meant for, I think this is a big improvement, and I suspect those cases
where it generates a bigger diff are tweakable.
So I think this diff fixes a real bug, but we might still want to tweak
the default values and perhaps the exact rules for when a break happens.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-20 19:31:31 +00:00
|
|
|
unsigned long src_copied, literal_added, src_removed;
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
|
|
|
|
*merge_score_p = 0; /* assume no deletion --- "do not break"
|
|
|
|
* is the default.
|
|
|
|
*/
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
|
2007-12-01 06:22:38 +00:00
|
|
|
if (S_ISREG(src->mode) != S_ISREG(dst->mode)) {
|
|
|
|
*merge_score_p = (int)MAX_SCORE;
|
|
|
|
return 1; /* even their types are different */
|
|
|
|
}
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
|
2016-06-24 23:09:24 +00:00
|
|
|
if (src->oid_valid && dst->oid_valid &&
|
2016-06-24 23:09:23 +00:00
|
|
|
!oidcmp(&src->oid, &dst->oid))
|
2006-03-01 04:19:47 +00:00
|
|
|
return 0; /* they are the same */
|
|
|
|
|
2018-09-21 15:57:19 +00:00
|
|
|
if (diff_populate_filespec(r, src, 0) ||
|
|
|
|
diff_populate_filespec(r, dst, 0))
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
return 0; /* error but caught downstream */
|
|
|
|
|
Fix diffcore-break total breakage
Ok, so on the kernel list, some people noticed that "git log --follow"
doesn't work too well with some files in the x86 merge, because a lot of
files got renamed in very special ways.
In particular, there was a pattern of doing single commits with renames
that looked basically like
- rename "filename.h" -> "filename_64.h"
- create new "filename.c" that includes "filename_32.h" or
"filename_64.h" depending on whether we're 32-bit or 64-bit.
which was preparatory for smushing the two trees together.
Now, there's two issues here:
- "filename.c" *remained*. Yes, it was a rename, but there was a new file
created with the old name in the same commit. This was important,
because we wanted each commit to compile properly, so that it was
bisectable, so splitting the rename into one commit and the "create
helper file" into another was *not* an option.
So we need to break associations where the contents change too much.
Fine. We have the -B flag for that. When we break things up, then the
rename detection will be able to figure out whether there are better
alternatives.
- "git log --follow" didn't with with -B.
Now, the second case was really simple: we use a different "diffopt"
structure for the rename detection than the basic one (which we use for
showing the diffs). So that second case is trivially fixed by a trivial
one-liner that just copies the break_opt values from the "real" diffopts
to the one used for rename following. So now "git log -B --follow" works
fine:
diff --git a/tree-diff.c b/tree-diff.c
index 26bdbdd..7c261fd 100644
--- a/tree-diff.c
+++ b/tree-diff.c
@@ -319,6 +319,7 @@ static void try_to_follow_renames(struct tree_desc *t1, struct tree_desc *t2, co
diff_opts.detect_rename = DIFF_DETECT_RENAME;
diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT;
diff_opts.single_follow = opt->paths[0];
+ diff_opts.break_opt = opt->break_opt;
paths[0] = NULL;
diff_tree_setup_paths(paths, &diff_opts);
if (diff_setup_done(&diff_opts) < 0)
however, the end result does *not* work. Because our diffcore-break.c
logic is totally bogus!
In particular:
- it used to do
if (base_size < MINIMUM_BREAK_SIZE)
return 0; /* we do not break too small filepair */
which basically says "don't bother to break small files". But that
"base_size" is the *smaller* of the two sizes, which means that if some
large file was rewritten into one that just includes another file, we
would look at the (small) result, and decide that it's smaller than the
break size, so it cannot be worth it to break it up! Even if the other
side was ten times bigger and looked *nothing* like the samell file!
That's clearly bogus. I replaced "base_size" with "max_size", so that
we compare the *bigger* of the filepair with the break size.
- It calculated a "merge_score", which was the score needed to merge it
back together if nothing else wanted it. But even if it was *so*
different that we would never want to merge it back, we wouldn't
consider it a break! That makes no sense. So I added
if (*merge_score_p > break_score)
return 1;
to make it clear that if we wouldn't want to merge it at the end, it
was *definitely* a break.
- It compared the whole "extent of damage", counting all inserts and
deletes, but it based this score on the "base_size", and generated the
damage score with
delta_size = src_removed + literal_added;
damage_score = delta_size * MAX_SCORE / base_size;
but that makes no sense either, since quite often, this will result in
a number that is *bigger* than MAX_SCORE! Why? Because base_size is
(again) the smaller of the two files we compare, and when you start out
from a small file and add a lot (or start out from a large file and
remove a lot), the base_size is going to be much smaller than the
damage!
Again, the fix was to replace "base_size" with "max_size", at which
point the damage actually becomes a sane percentage of the whole.
With these changes in place, not only does "git log -B --follow" work for
the case that triggered this in the first place, ie now
git log -B --follow arch/x86/kernel/vmlinux_64.lds.S
actually gives reasonable results. But I also wanted to verify it in
general, by doing a full-history
git log --stat -B -C
on my kernel tree with the old code and the new code.
There's some tweaking to be done, but generally, the new code generates
much better results wrt breaking up files (and then finding better rename
candidates). Here's a few examples of the "--stat" output:
- This:
include/asm-x86/Kbuild | 2 -
include/asm-x86/debugreg.h | 79 +++++++++++++++++++++++++++++++++++------
include/asm-x86/debugreg_32.h | 64 ---------------------------------
include/asm-x86/debugreg_64.h | 65 ---------------------------------
4 files changed, 68 insertions(+), 142 deletions(-)
Becomes:
include/asm-x86/Kbuild | 2 -
include/asm-x86/{debugreg_64.h => debugreg.h} | 9 +++-
include/asm-x86/debugreg_32.h | 64 -------------------------
3 files changed, 7 insertions(+), 68 deletions(-)
- This:
include/asm-x86/bug.h | 41 +++++++++++++++++++++++++++++++++++++++--
include/asm-x86/bug_32.h | 37 -------------------------------------
include/asm-x86/bug_64.h | 34 ----------------------------------
3 files changed, 39 insertions(+), 73 deletions(-)
Becomes
include/asm-x86/{bug_64.h => bug.h} | 20 +++++++++++++-----
include/asm-x86/bug_32.h | 37 -----------------------------------
2 files changed, 14 insertions(+), 43 deletions(-)
Now, in some other cases, it does actually turn a rename into a real
"delete+create" pair, and then the diff is usually bigger, so truth in
advertizing: it doesn't always generate a nicer diff. But for what -B was
meant for, I think this is a big improvement, and I suspect those cases
where it generates a bigger diff are tweakable.
So I think this diff fixes a real bug, but we might still want to tweak
the default values and perhaps the exact rules for when a break happens.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-20 19:31:31 +00:00
|
|
|
max_size = ((src->size > dst->size) ? src->size : dst->size);
|
|
|
|
if (max_size < MINIMUM_BREAK_SIZE)
|
2005-12-13 01:15:55 +00:00
|
|
|
return 0; /* we do not break too small filepair */
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
|
2013-04-03 19:24:05 +00:00
|
|
|
if (!src->size)
|
|
|
|
return 0; /* we do not let empty files get renamed */
|
|
|
|
|
2018-09-21 15:57:19 +00:00
|
|
|
if (diffcore_count_changes(r, src, dst,
|
2009-11-16 16:02:02 +00:00
|
|
|
&src->cnt_data, &dst->cnt_data,
|
2006-03-01 00:01:36 +00:00
|
|
|
&src_copied, &literal_added))
|
|
|
|
return 0;
|
2005-06-03 08:36:03 +00:00
|
|
|
|
2006-03-04 09:03:53 +00:00
|
|
|
/* sanity */
|
|
|
|
if (src->size < src_copied)
|
|
|
|
src_copied = src->size;
|
|
|
|
if (dst->size < literal_added + src_copied) {
|
|
|
|
if (src_copied < dst->size)
|
|
|
|
literal_added = dst->size - src_copied;
|
|
|
|
else
|
|
|
|
literal_added = 0;
|
|
|
|
}
|
|
|
|
src_removed = src->size - src_copied;
|
|
|
|
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
/* Compute merge-score, which is "how much is removed
|
|
|
|
* from the source material". The clean-up stage will
|
|
|
|
* merge the surviving pair together if the score is
|
|
|
|
* less than the minimum, after rename/copy runs.
|
|
|
|
*/
|
2007-03-07 01:44:37 +00:00
|
|
|
*merge_score_p = (int)(src_removed * MAX_SCORE / src->size);
|
Fix diffcore-break total breakage
Ok, so on the kernel list, some people noticed that "git log --follow"
doesn't work too well with some files in the x86 merge, because a lot of
files got renamed in very special ways.
In particular, there was a pattern of doing single commits with renames
that looked basically like
- rename "filename.h" -> "filename_64.h"
- create new "filename.c" that includes "filename_32.h" or
"filename_64.h" depending on whether we're 32-bit or 64-bit.
which was preparatory for smushing the two trees together.
Now, there's two issues here:
- "filename.c" *remained*. Yes, it was a rename, but there was a new file
created with the old name in the same commit. This was important,
because we wanted each commit to compile properly, so that it was
bisectable, so splitting the rename into one commit and the "create
helper file" into another was *not* an option.
So we need to break associations where the contents change too much.
Fine. We have the -B flag for that. When we break things up, then the
rename detection will be able to figure out whether there are better
alternatives.
- "git log --follow" didn't with with -B.
Now, the second case was really simple: we use a different "diffopt"
structure for the rename detection than the basic one (which we use for
showing the diffs). So that second case is trivially fixed by a trivial
one-liner that just copies the break_opt values from the "real" diffopts
to the one used for rename following. So now "git log -B --follow" works
fine:
diff --git a/tree-diff.c b/tree-diff.c
index 26bdbdd..7c261fd 100644
--- a/tree-diff.c
+++ b/tree-diff.c
@@ -319,6 +319,7 @@ static void try_to_follow_renames(struct tree_desc *t1, struct tree_desc *t2, co
diff_opts.detect_rename = DIFF_DETECT_RENAME;
diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT;
diff_opts.single_follow = opt->paths[0];
+ diff_opts.break_opt = opt->break_opt;
paths[0] = NULL;
diff_tree_setup_paths(paths, &diff_opts);
if (diff_setup_done(&diff_opts) < 0)
however, the end result does *not* work. Because our diffcore-break.c
logic is totally bogus!
In particular:
- it used to do
if (base_size < MINIMUM_BREAK_SIZE)
return 0; /* we do not break too small filepair */
which basically says "don't bother to break small files". But that
"base_size" is the *smaller* of the two sizes, which means that if some
large file was rewritten into one that just includes another file, we
would look at the (small) result, and decide that it's smaller than the
break size, so it cannot be worth it to break it up! Even if the other
side was ten times bigger and looked *nothing* like the samell file!
That's clearly bogus. I replaced "base_size" with "max_size", so that
we compare the *bigger* of the filepair with the break size.
- It calculated a "merge_score", which was the score needed to merge it
back together if nothing else wanted it. But even if it was *so*
different that we would never want to merge it back, we wouldn't
consider it a break! That makes no sense. So I added
if (*merge_score_p > break_score)
return 1;
to make it clear that if we wouldn't want to merge it at the end, it
was *definitely* a break.
- It compared the whole "extent of damage", counting all inserts and
deletes, but it based this score on the "base_size", and generated the
damage score with
delta_size = src_removed + literal_added;
damage_score = delta_size * MAX_SCORE / base_size;
but that makes no sense either, since quite often, this will result in
a number that is *bigger* than MAX_SCORE! Why? Because base_size is
(again) the smaller of the two files we compare, and when you start out
from a small file and add a lot (or start out from a large file and
remove a lot), the base_size is going to be much smaller than the
damage!
Again, the fix was to replace "base_size" with "max_size", at which
point the damage actually becomes a sane percentage of the whole.
With these changes in place, not only does "git log -B --follow" work for
the case that triggered this in the first place, ie now
git log -B --follow arch/x86/kernel/vmlinux_64.lds.S
actually gives reasonable results. But I also wanted to verify it in
general, by doing a full-history
git log --stat -B -C
on my kernel tree with the old code and the new code.
There's some tweaking to be done, but generally, the new code generates
much better results wrt breaking up files (and then finding better rename
candidates). Here's a few examples of the "--stat" output:
- This:
include/asm-x86/Kbuild | 2 -
include/asm-x86/debugreg.h | 79 +++++++++++++++++++++++++++++++++++------
include/asm-x86/debugreg_32.h | 64 ---------------------------------
include/asm-x86/debugreg_64.h | 65 ---------------------------------
4 files changed, 68 insertions(+), 142 deletions(-)
Becomes:
include/asm-x86/Kbuild | 2 -
include/asm-x86/{debugreg_64.h => debugreg.h} | 9 +++-
include/asm-x86/debugreg_32.h | 64 -------------------------
3 files changed, 7 insertions(+), 68 deletions(-)
- This:
include/asm-x86/bug.h | 41 +++++++++++++++++++++++++++++++++++++++--
include/asm-x86/bug_32.h | 37 -------------------------------------
include/asm-x86/bug_64.h | 34 ----------------------------------
3 files changed, 39 insertions(+), 73 deletions(-)
Becomes
include/asm-x86/{bug_64.h => bug.h} | 20 +++++++++++++-----
include/asm-x86/bug_32.h | 37 -----------------------------------
2 files changed, 14 insertions(+), 43 deletions(-)
Now, in some other cases, it does actually turn a rename into a real
"delete+create" pair, and then the diff is usually bigger, so truth in
advertizing: it doesn't always generate a nicer diff. But for what -B was
meant for, I think this is a big improvement, and I suspect those cases
where it generates a bigger diff are tweakable.
So I think this diff fixes a real bug, but we might still want to tweak
the default values and perhaps the exact rules for when a break happens.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-20 19:31:31 +00:00
|
|
|
if (*merge_score_p > break_score)
|
|
|
|
return 1;
|
2006-03-04 09:03:53 +00:00
|
|
|
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
/* Extent of damage, which counts both inserts and
|
|
|
|
* deletes.
|
|
|
|
*/
|
2006-03-04 09:03:53 +00:00
|
|
|
delta_size = src_removed + literal_added;
|
Fix diffcore-break total breakage
Ok, so on the kernel list, some people noticed that "git log --follow"
doesn't work too well with some files in the x86 merge, because a lot of
files got renamed in very special ways.
In particular, there was a pattern of doing single commits with renames
that looked basically like
- rename "filename.h" -> "filename_64.h"
- create new "filename.c" that includes "filename_32.h" or
"filename_64.h" depending on whether we're 32-bit or 64-bit.
which was preparatory for smushing the two trees together.
Now, there's two issues here:
- "filename.c" *remained*. Yes, it was a rename, but there was a new file
created with the old name in the same commit. This was important,
because we wanted each commit to compile properly, so that it was
bisectable, so splitting the rename into one commit and the "create
helper file" into another was *not* an option.
So we need to break associations where the contents change too much.
Fine. We have the -B flag for that. When we break things up, then the
rename detection will be able to figure out whether there are better
alternatives.
- "git log --follow" didn't with with -B.
Now, the second case was really simple: we use a different "diffopt"
structure for the rename detection than the basic one (which we use for
showing the diffs). So that second case is trivially fixed by a trivial
one-liner that just copies the break_opt values from the "real" diffopts
to the one used for rename following. So now "git log -B --follow" works
fine:
diff --git a/tree-diff.c b/tree-diff.c
index 26bdbdd..7c261fd 100644
--- a/tree-diff.c
+++ b/tree-diff.c
@@ -319,6 +319,7 @@ static void try_to_follow_renames(struct tree_desc *t1, struct tree_desc *t2, co
diff_opts.detect_rename = DIFF_DETECT_RENAME;
diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT;
diff_opts.single_follow = opt->paths[0];
+ diff_opts.break_opt = opt->break_opt;
paths[0] = NULL;
diff_tree_setup_paths(paths, &diff_opts);
if (diff_setup_done(&diff_opts) < 0)
however, the end result does *not* work. Because our diffcore-break.c
logic is totally bogus!
In particular:
- it used to do
if (base_size < MINIMUM_BREAK_SIZE)
return 0; /* we do not break too small filepair */
which basically says "don't bother to break small files". But that
"base_size" is the *smaller* of the two sizes, which means that if some
large file was rewritten into one that just includes another file, we
would look at the (small) result, and decide that it's smaller than the
break size, so it cannot be worth it to break it up! Even if the other
side was ten times bigger and looked *nothing* like the samell file!
That's clearly bogus. I replaced "base_size" with "max_size", so that
we compare the *bigger* of the filepair with the break size.
- It calculated a "merge_score", which was the score needed to merge it
back together if nothing else wanted it. But even if it was *so*
different that we would never want to merge it back, we wouldn't
consider it a break! That makes no sense. So I added
if (*merge_score_p > break_score)
return 1;
to make it clear that if we wouldn't want to merge it at the end, it
was *definitely* a break.
- It compared the whole "extent of damage", counting all inserts and
deletes, but it based this score on the "base_size", and generated the
damage score with
delta_size = src_removed + literal_added;
damage_score = delta_size * MAX_SCORE / base_size;
but that makes no sense either, since quite often, this will result in
a number that is *bigger* than MAX_SCORE! Why? Because base_size is
(again) the smaller of the two files we compare, and when you start out
from a small file and add a lot (or start out from a large file and
remove a lot), the base_size is going to be much smaller than the
damage!
Again, the fix was to replace "base_size" with "max_size", at which
point the damage actually becomes a sane percentage of the whole.
With these changes in place, not only does "git log -B --follow" work for
the case that triggered this in the first place, ie now
git log -B --follow arch/x86/kernel/vmlinux_64.lds.S
actually gives reasonable results. But I also wanted to verify it in
general, by doing a full-history
git log --stat -B -C
on my kernel tree with the old code and the new code.
There's some tweaking to be done, but generally, the new code generates
much better results wrt breaking up files (and then finding better rename
candidates). Here's a few examples of the "--stat" output:
- This:
include/asm-x86/Kbuild | 2 -
include/asm-x86/debugreg.h | 79 +++++++++++++++++++++++++++++++++++------
include/asm-x86/debugreg_32.h | 64 ---------------------------------
include/asm-x86/debugreg_64.h | 65 ---------------------------------
4 files changed, 68 insertions(+), 142 deletions(-)
Becomes:
include/asm-x86/Kbuild | 2 -
include/asm-x86/{debugreg_64.h => debugreg.h} | 9 +++-
include/asm-x86/debugreg_32.h | 64 -------------------------
3 files changed, 7 insertions(+), 68 deletions(-)
- This:
include/asm-x86/bug.h | 41 +++++++++++++++++++++++++++++++++++++++--
include/asm-x86/bug_32.h | 37 -------------------------------------
include/asm-x86/bug_64.h | 34 ----------------------------------
3 files changed, 39 insertions(+), 73 deletions(-)
Becomes
include/asm-x86/{bug_64.h => bug.h} | 20 +++++++++++++-----
include/asm-x86/bug_32.h | 37 -----------------------------------
2 files changed, 14 insertions(+), 43 deletions(-)
Now, in some other cases, it does actually turn a rename into a real
"delete+create" pair, and then the diff is usually bigger, so truth in
advertizing: it doesn't always generate a nicer diff. But for what -B was
meant for, I think this is a big improvement, and I suspect those cases
where it generates a bigger diff are tweakable.
So I think this diff fixes a real bug, but we might still want to tweak
the default values and perhaps the exact rules for when a break happens.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-20 19:31:31 +00:00
|
|
|
if (delta_size * MAX_SCORE / max_size < break_score)
|
2006-03-04 09:03:53 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* If you removed a lot without adding new material, that is
|
|
|
|
* not really a rewrite.
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
*/
|
2006-03-04 09:03:53 +00:00
|
|
|
if ((src->size * break_score < src_removed * MAX_SCORE) &&
|
|
|
|
(literal_added * 20 < src_removed) &&
|
|
|
|
(literal_added * 20 < src_copied))
|
|
|
|
return 0;
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
|
2006-03-04 09:03:53 +00:00
|
|
|
return 1;
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
}
|
|
|
|
|
2018-09-21 15:57:19 +00:00
|
|
|
void diffcore_break(struct repository *r, int break_score)
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
{
|
|
|
|
struct diff_queue_struct *q = &diff_queued_diff;
|
|
|
|
struct diff_queue_struct outq;
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
|
|
|
|
/* When the filepair has this much edit (insert and delete),
|
|
|
|
* it is first considered to be a rewrite and broken into a
|
|
|
|
* create and delete filepair. This is to help breaking a
|
|
|
|
* file that had too much new stuff added, possibly from
|
|
|
|
* moving contents from another file, so that rename/copy can
|
|
|
|
* match it with the other file.
|
|
|
|
*
|
|
|
|
* int break_score; we reuse incoming parameter for this.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* After a pair is broken according to break_score and
|
|
|
|
* subjected to rename/copy, both of them may survive intact,
|
|
|
|
* due to lack of suitable rename/copy peer. Or, the caller
|
|
|
|
* may be calling us without using rename/copy. When that
|
|
|
|
* happens, we merge the broken pieces back into one
|
|
|
|
* modification together if the pair did not have more than
|
|
|
|
* this much delete. For this computation, we do not take
|
|
|
|
* insert into account at all. If you start from a 100-line
|
|
|
|
* file and delete 97 lines of it, it does not matter if you
|
|
|
|
* add 27 lines to it to make a new 30-line file or if you add
|
|
|
|
* 997 lines to it to make a 1000-line file. Either way what
|
|
|
|
* you did was a rewrite of 97%. On the other hand, if you
|
|
|
|
* delete 3 lines, keeping 97 lines intact, it does not matter
|
|
|
|
* if you add 3 lines to it to make a new 100-line file or if
|
|
|
|
* you add 903 lines to it to make a new 1000-line file.
|
|
|
|
* Either way you did a lot of additions and not a rewrite.
|
|
|
|
* This merge happens to catch the latter case. A merge_score
|
|
|
|
* of 80% would be a good default value (a broken pair that
|
|
|
|
* has score lower than merge_score will be merged back
|
|
|
|
* together).
|
|
|
|
*/
|
|
|
|
int merge_score;
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
int i;
|
|
|
|
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
/* See comment on DEFAULT_BREAK_SCORE and
|
|
|
|
* DEFAULT_MERGE_SCORE in diffcore.h
|
|
|
|
*/
|
|
|
|
merge_score = (break_score >> 16) & 0xFFFF;
|
|
|
|
break_score = (break_score & 0xFFFF);
|
|
|
|
|
|
|
|
if (!break_score)
|
|
|
|
break_score = DEFAULT_BREAK_SCORE;
|
|
|
|
if (!merge_score)
|
|
|
|
merge_score = DEFAULT_MERGE_SCORE;
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
|
2010-05-07 04:52:27 +00:00
|
|
|
DIFF_QUEUE_CLEAR(&outq);
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
|
|
|
|
for (i = 0; i < q->nr; i++) {
|
|
|
|
struct diff_filepair *p = q->queue[i];
|
|
|
|
int score;
|
|
|
|
|
2007-12-01 06:22:38 +00:00
|
|
|
/*
|
|
|
|
* We deal only with in-place edit of blobs.
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
* We do not break anything else.
|
|
|
|
*/
|
|
|
|
if (DIFF_FILE_VALID(p->one) && DIFF_FILE_VALID(p->two) &&
|
2007-12-01 06:22:38 +00:00
|
|
|
object_type(p->one->mode) == OBJ_BLOB &&
|
|
|
|
object_type(p->two->mode) == OBJ_BLOB &&
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
!strcmp(p->one->path, p->two->path)) {
|
2018-09-21 15:57:19 +00:00
|
|
|
if (should_break(r, p->one, p->two,
|
2005-12-13 01:15:55 +00:00
|
|
|
break_score, &score)) {
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
/* Split this into delete and create */
|
|
|
|
struct diff_filespec *null_one, *null_two;
|
|
|
|
struct diff_filepair *dp;
|
|
|
|
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
/* Set score to 0 for the pair that
|
|
|
|
* needs to be merged back together
|
|
|
|
* should they survive rename/copy.
|
|
|
|
* Also we do not want to break very
|
|
|
|
* small files.
|
|
|
|
*/
|
2005-06-04 06:05:57 +00:00
|
|
|
if (score < merge_score)
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
score = 0;
|
|
|
|
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
/* deletion of one */
|
|
|
|
null_one = alloc_filespec(p->one->path);
|
|
|
|
dp = diff_queue(&outq, p->one, null_one);
|
|
|
|
dp->score = score;
|
|
|
|
dp->broken_pair = 1;
|
|
|
|
|
|
|
|
/* creation of two */
|
|
|
|
null_two = alloc_filespec(p->two->path);
|
|
|
|
dp = diff_queue(&outq, null_two, p->two);
|
|
|
|
dp->score = score;
|
|
|
|
dp->broken_pair = 1;
|
|
|
|
|
2009-11-16 16:02:02 +00:00
|
|
|
diff_free_filespec_blob(p->one);
|
|
|
|
diff_free_filespec_blob(p->two);
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
free(p); /* not diff_free_filepair(), we are
|
|
|
|
* reusing one and two here.
|
|
|
|
*/
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
2009-11-16 15:56:25 +00:00
|
|
|
diff_free_filespec_data(p->one);
|
|
|
|
diff_free_filespec_data(p->two);
|
[PATCH] Add -B flag to diff-* brothers.
A new diffcore transformation, diffcore-break.c, is introduced.
When the -B flag is given, a patch that represents a complete
rewrite is broken into a deletion followed by a creation. This
makes it easier to review such a complete rewrite patch.
The -B flag takes the same syntax as the -M and -C flags to
specify the minimum amount of non-source material the resulting
file needs to have to be considered a complete rewrite, and
defaults to 99% if not specified.
As the new test t4008-diff-break-rewrite.sh demonstrates, if a
file is a complete rewrite, it is broken into a delete/create
pair, which can further be subjected to the usual rename
detection if -M or -C is used. For example, if file0 gets
completely rewritten to make it as if it were rather based on
file1 which itself disappeared, the following happens:
The original change looks like this:
file0 --> file0' (quite different from file0)
file1 --> /dev/null
After diffcore-break runs, it would become this:
file0 --> /dev/null
/dev/null --> file0'
file1 --> /dev/null
Then diffcore-rename matches them up:
file1 --> file0'
The internal score values are finer grained now. Earlier
maximum of 10000 has been raised to 60000; there is no user
visible changes but there is no reason to waste available bits.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-30 07:08:37 +00:00
|
|
|
diff_q(&outq, p);
|
|
|
|
}
|
|
|
|
free(q->queue);
|
|
|
|
*q = outq;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
|
|
|
|
static void merge_broken(struct diff_filepair *p,
|
|
|
|
struct diff_filepair *pp,
|
|
|
|
struct diff_queue_struct *outq)
|
|
|
|
{
|
|
|
|
/* p and pp are broken pairs we want to merge */
|
2005-06-19 20:17:50 +00:00
|
|
|
struct diff_filepair *c = p, *d = pp, *dp;
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
if (DIFF_FILE_VALID(p->one)) {
|
|
|
|
/* this must be a delete half */
|
|
|
|
d = p; c = pp;
|
|
|
|
}
|
|
|
|
/* Sanity check */
|
|
|
|
if (!DIFF_FILE_VALID(d->one))
|
|
|
|
die("internal error in merge #1");
|
|
|
|
if (DIFF_FILE_VALID(d->two))
|
|
|
|
die("internal error in merge #2");
|
|
|
|
if (DIFF_FILE_VALID(c->one))
|
|
|
|
die("internal error in merge #3");
|
|
|
|
if (!DIFF_FILE_VALID(c->two))
|
|
|
|
die("internal error in merge #4");
|
|
|
|
|
2005-06-19 20:17:50 +00:00
|
|
|
dp = diff_queue(outq, d->one, c->two);
|
|
|
|
dp->score = p->score;
|
diff -B -M: fix output for "copy and then rewrite" case
Starting from a single file, A, if you create B as a copy of A (and
possibly make some edit) and then make extensive change to A, you
will see:
$ git diff -C --name-status
C89 A B
M A
which is expected. However, if you ask the same question in a
different way, you see this:
$ git diff -B -M --name-status
R89 A B
M100 A
telling us that A was rename-edited into B (as if "A will no longer
exist as the result") and at the same time A itself was extensively
edited.
In this case, because the resulting tree still does have file A
(even if it has contents vastly different from the original), we
should use "C"opy, not "R"ename, to avoid hinting that A somehow
goes away.
Two existing tests were depending on the wrong behaviour, and fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-23 17:02:02 +00:00
|
|
|
/*
|
|
|
|
* We will be one extra user of the same src side of the
|
|
|
|
* broken pair, if it was used as the rename source for other
|
|
|
|
* paths elsewhere. Increment to mark that the path stays
|
|
|
|
* in the resulting tree.
|
|
|
|
*/
|
|
|
|
d->one->rename_used++;
|
2005-09-14 21:06:50 +00:00
|
|
|
diff_free_filespec_data(d->two);
|
|
|
|
diff_free_filespec_data(c->one);
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
free(d);
|
|
|
|
free(c);
|
|
|
|
}
|
|
|
|
|
|
|
|
void diffcore_merge_broken(void)
|
|
|
|
{
|
|
|
|
struct diff_queue_struct *q = &diff_queued_diff;
|
|
|
|
struct diff_queue_struct outq;
|
|
|
|
int i, j;
|
|
|
|
|
2010-05-07 04:52:27 +00:00
|
|
|
DIFF_QUEUE_CLEAR(&outq);
|
[PATCH] diff: Update -B heuristics.
As Linus pointed out on the mailing list discussion, -B should
break a files that has many inserts even if it still keeps
enough of the original contents, so that the broken pieces can
later be matched with other files by -M or -C. However, if such
a broken pair does not get picked up by -M or -C, we would want
to apply different criteria; namely, regardless of the amount of
new material in the result, the determination of "rewrite"
should be done by looking at the amount of original material
still left in the result. If you still have the original 97
lines from a 100-line document, it does not matter if you add
your own 13 lines to make a 110-line document, or if you add 903
lines to make a 1000-line document. It is not a rewrite but an
in-place edit. On the other hand, if you did lose 97 lines from
the original, it does not matter if you added 27 lines to make a
30-line document or if you added 997 lines to make a 1000-line
document. You did a complete rewrite in either case.
This patch introduces a post-processing phase that runs after
diffcore-rename matches up broken pairs diffcore-break creates.
The purpose of this post-processing is to pick up these broken
pieces and merge them back into in-place modifications. For
this, the score parameter -B option takes is changed into a pair
of numbers, and it takes "-B99/80" format when fully spelled
out. The first number is the minimum amount of "edit" (same
definition as what diffcore-rename uses, which is "sum of
deletion and insertion") that a modification needs to have to be
broken, and the second number is the minimum amount of "delete"
a surviving broken pair must have to avoid being merged back
together. It can be abbreviated to "-B" to use default for
both, "-B9" or "-B9/" to use 90% for "edit" but default (80%)
for merge avoidance, or "-B/75" to use default (99%) "edit" and
75% for merge avoidance.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:40:28 +00:00
|
|
|
|
|
|
|
for (i = 0; i < q->nr; i++) {
|
|
|
|
struct diff_filepair *p = q->queue[i];
|
|
|
|
if (!p)
|
|
|
|
/* we already merged this with its peer */
|
|
|
|
continue;
|
|
|
|
else if (p->broken_pair &&
|
|
|
|
!strcmp(p->one->path, p->two->path)) {
|
|
|
|
/* If the peer also survived rename/copy, then
|
|
|
|
* we merge them back together.
|
|
|
|
*/
|
|
|
|
for (j = i + 1; j < q->nr; j++) {
|
|
|
|
struct diff_filepair *pp = q->queue[j];
|
|
|
|
if (pp->broken_pair &&
|
|
|
|
!strcmp(pp->one->path, pp->two->path) &&
|
|
|
|
!strcmp(p->one->path, pp->two->path)) {
|
|
|
|
/* Peer survived. Merge them */
|
|
|
|
merge_broken(p, pp, &outq);
|
|
|
|
q->queue[j] = NULL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (q->nr <= j)
|
|
|
|
/* The peer did not survive, so we keep
|
|
|
|
* it in the output.
|
|
|
|
*/
|
|
|
|
diff_q(&outq, p);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
diff_q(&outq, p);
|
|
|
|
}
|
|
|
|
free(q->queue);
|
|
|
|
*q = outq;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|