git/connected.c

156 lines
4.4 KiB
C
Raw Normal View History

#include "cache.h"
#include "object-store.h"
#include "run-command.h"
#include "sigchain.h"
#include "connected.h"
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 01:16:17 +00:00
#include "transport.h"
#include "packfile.h"
#include "promisor-remote.h"
/*
* If we feed all the commits we want to verify to this command
*
* $ git rev-list --objects --stdin --not --all
*
* and if it does not error out, that means everything reachable from
* these commits locally exists and is connected to our existing refs.
* Note that this does _not_ validate the individual objects.
*
* Returns 0 if everything is connected, non-zero otherwise.
*/
int check_connected(oid_iterate_fn fn, void *cb_data,
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 10:30:40 +00:00
struct check_connected_options *opt)
{
struct child_process rev_list = CHILD_PROCESS_INIT;
FILE *rev_list_in;
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 10:30:40 +00:00
struct check_connected_options defaults = CHECK_CONNECTED_INIT;
connected: refactor iterator to return next object ID directly The object ID iterator used by the connectivity checks returns the next object ID via an out-parameter and then uses a return code to indicate whether an item was found. This is a bit roundabout: instead of a separate error code, we can just return the next object ID directly and use `NULL` pointers as indicator that the iterator got no items left. Furthermore, this avoids a copy of the object ID. Refactor the iterator and all its implementations to return object IDs directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs: Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s] Range (min … max): 29.934 s … 30.406 s 10 runs Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s] Range (min … max): 29.696 s … 29.996 s 10 runs Summary '328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran 1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch' While this 1% speedup could be labelled as statistically insignificant, the speedup is consistent on my machine. Furthermore, this is an end to end test, so it is expected that the improvement in the connectivity check itself is more significant. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 13:09:50 +00:00
const struct object_id *oid;
int err = 0;
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 01:16:17 +00:00
struct packed_git *new_pack = NULL;
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 10:30:40 +00:00
struct transport *transport;
size_t base_len;
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 10:30:40 +00:00
if (!opt)
opt = &defaults;
transport = opt->transport;
connected: refactor iterator to return next object ID directly The object ID iterator used by the connectivity checks returns the next object ID via an out-parameter and then uses a return code to indicate whether an item was found. This is a bit roundabout: instead of a separate error code, we can just return the next object ID directly and use `NULL` pointers as indicator that the iterator got no items left. Furthermore, this avoids a copy of the object ID. Refactor the iterator and all its implementations to return object IDs directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs: Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s] Range (min … max): 29.934 s … 30.406 s 10 runs Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s] Range (min … max): 29.696 s … 29.996 s 10 runs Summary '328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran 1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch' While this 1% speedup could be labelled as statistically insignificant, the speedup is consistent on my machine. Furthermore, this is an end to end test, so it is expected that the improvement in the connectivity check itself is more significant. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 13:09:50 +00:00
oid = fn(cb_data);
if (!oid) {
if (opt->err_fd)
close(opt->err_fd);
return err;
}
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 01:16:17 +00:00
if (transport && transport->smart_options &&
transport->smart_options->self_contained_and_connected &&
transport->pack_lockfiles.nr == 1 &&
strip_suffix(transport->pack_lockfiles.items[0].string,
".keep", &base_len)) {
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 01:16:17 +00:00
struct strbuf idx_file = STRBUF_INIT;
strbuf_add(&idx_file, transport->pack_lockfiles.items[0].string,
base_len);
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 01:16:17 +00:00
strbuf_addstr(&idx_file, ".idx");
new_pack = add_packed_git(idx_file.buf, idx_file.len, 1);
strbuf_release(&idx_file);
}
connected: always use partial clone optimization With 50033772d5 ("connected: verify promisor-ness of partial clone", 2020-01-30), the fast path (checking promisor packs) in check_connected() now passes a subset of the slow path (rev-list) - if all objects to be checked are found in promisor packs, both the fast path and the slow path will pass; otherwise, the fast path will definitely not pass. This means that we can always attempt the fast path whenever we need to do the slow path. The fast path is currently guarded by a flag; therefore, remove that flag. Also, make the fast path fallback to the slow path - if the fast path fails, the failing OID and all remaining OIDs will be passed to rev-list. The main user-visible benefit is the performance of fetch from a partial clone - specifically, the speedup of the connectivity check done before the fetch. In particular, a no-op fetch into a partial clone on my computer was sped up from 7 seconds to 0.01 seconds. This is a complement to the work in 2df1aa239c ("fetch: forgo full connectivity check if --filter", 2020-01-30), which is the child of the aforementioned 50033772d5. In that commit, the connectivity check *after* the fetch was sped up. The addition of the fast path might cause performance reductions in these cases: - If a partial clone or a fetch into a partial clone fails, Git will fruitlessly run rev-list (it is expected that everything fetched would go into promisor packs, so if that didn't happen, it is most likely that rev-list will fail too). - Any connectivity checks done by receive-pack, in the (in my opinion, unlikely) event that a partial clone serves receive-pack. I think that these cases are rare enough, and the performance reduction in this case minor enough (additional object DB access), that the benefit of avoiding a flag outweighs these. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Reviewed-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-20 22:00:45 +00:00
if (has_promisor_remote()) {
/*
* For partial clones, we don't want to have to do a regular
* connectivity check because we have to enumerate and exclude
* all promisor objects (slow), and then the connectivity check
* itself becomes a no-op because in a partial clone every
* object is a promisor object. Instead, just make sure we
* received, in a promisor packfile, the objects pointed to by
* each wanted ref.
connected.c: reprepare packs for corner cases While updating the microsoft/git fork on top of v2.26.0-rc0 and consuming that build into Scalar, I noticed a corner case bug around partial clone. The "scalar clone" command can create a Git repository with the proper config for using partial clone with the "blob:none" filter. Instead of calling "git clone", it runs "git init" then sets a few more config values before running "git fetch". In our builds on v2.26.0-rc0, we noticed that our "git fetch" command was failing with error: https://github.com/microsoft/scalar did not send all necessary objects This does not happen if you copy the config file from a repository created by "git clone --filter=blob:none <url>", but it does happen when adding the config option "core.logAllRefUpdates = true". By debugging, I was able to see that the loop inside check_connnected() that checks if all refs are contained in promisor packs actually did not have any packfiles in the packed_git list. I'm not sure what corner-case issues caused this config option to prevent the reprepare_packed_git() from being called at the proper spot during the fetch operation. This approach requires a situation where we use the remote helper process, which makes it difficult to test. It is possible to place a reprepare_packed_git() call in the fetch code closer to where we receive a pack, but that leaves an opening for a later change to re-introduce this problem. Further, a concurrent repack operation could replace the pack-file list we already loaded into memory, causing this issue in an even harder to reproduce scenario. It is really the responsibility of anyone looping through the list of pack-files for a certain object to fall back to reprepare_packed_git() on a fail-to-find. The loop in check_connected() does not have this fallback, leading to this bug. We _could_ try looping through the packs and only reprepare the packs after a miss, but that change is more involved and has little value. Since this case is isolated to the case when opt->check_refs_are_promisor_objects_only is true, we are confident that we are verifying the refs after downloading new data. This implies that calling reprepare_packed_git() in advance is not a huge cost compared to the rest of the operations already made. Helped-by: Jeff King <peff@peff.net> Helped-by: Junio Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-13 21:11:55 +00:00
*
* Before checking for promisor packs, be sure we have the
* latest pack-files loaded into memory.
*/
connected.c: reprepare packs for corner cases While updating the microsoft/git fork on top of v2.26.0-rc0 and consuming that build into Scalar, I noticed a corner case bug around partial clone. The "scalar clone" command can create a Git repository with the proper config for using partial clone with the "blob:none" filter. Instead of calling "git clone", it runs "git init" then sets a few more config values before running "git fetch". In our builds on v2.26.0-rc0, we noticed that our "git fetch" command was failing with error: https://github.com/microsoft/scalar did not send all necessary objects This does not happen if you copy the config file from a repository created by "git clone --filter=blob:none <url>", but it does happen when adding the config option "core.logAllRefUpdates = true". By debugging, I was able to see that the loop inside check_connnected() that checks if all refs are contained in promisor packs actually did not have any packfiles in the packed_git list. I'm not sure what corner-case issues caused this config option to prevent the reprepare_packed_git() from being called at the proper spot during the fetch operation. This approach requires a situation where we use the remote helper process, which makes it difficult to test. It is possible to place a reprepare_packed_git() call in the fetch code closer to where we receive a pack, but that leaves an opening for a later change to re-introduce this problem. Further, a concurrent repack operation could replace the pack-file list we already loaded into memory, causing this issue in an even harder to reproduce scenario. It is really the responsibility of anyone looping through the list of pack-files for a certain object to fall back to reprepare_packed_git() on a fail-to-find. The loop in check_connected() does not have this fallback, leading to this bug. We _could_ try looping through the packs and only reprepare the packs after a miss, but that change is more involved and has little value. Since this case is isolated to the case when opt->check_refs_are_promisor_objects_only is true, we are confident that we are verifying the refs after downloading new data. This implies that calling reprepare_packed_git() in advance is not a huge cost compared to the rest of the operations already made. Helped-by: Jeff King <peff@peff.net> Helped-by: Junio Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-13 21:11:55 +00:00
reprepare_packed_git(the_repository);
do {
struct packed_git *p;
for (p = get_all_packs(the_repository); p; p = p->next) {
if (!p->pack_promisor)
continue;
connected: refactor iterator to return next object ID directly The object ID iterator used by the connectivity checks returns the next object ID via an out-parameter and then uses a return code to indicate whether an item was found. This is a bit roundabout: instead of a separate error code, we can just return the next object ID directly and use `NULL` pointers as indicator that the iterator got no items left. Furthermore, this avoids a copy of the object ID. Refactor the iterator and all its implementations to return object IDs directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs: Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s] Range (min … max): 29.934 s … 30.406 s 10 runs Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s] Range (min … max): 29.696 s … 29.996 s 10 runs Summary '328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran 1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch' While this 1% speedup could be labelled as statistically insignificant, the speedup is consistent on my machine. Furthermore, this is an end to end test, so it is expected that the improvement in the connectivity check itself is more significant. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 13:09:50 +00:00
if (find_pack_entry_one(oid->hash, p))
goto promisor_pack_found;
}
connected: always use partial clone optimization With 50033772d5 ("connected: verify promisor-ness of partial clone", 2020-01-30), the fast path (checking promisor packs) in check_connected() now passes a subset of the slow path (rev-list) - if all objects to be checked are found in promisor packs, both the fast path and the slow path will pass; otherwise, the fast path will definitely not pass. This means that we can always attempt the fast path whenever we need to do the slow path. The fast path is currently guarded by a flag; therefore, remove that flag. Also, make the fast path fallback to the slow path - if the fast path fails, the failing OID and all remaining OIDs will be passed to rev-list. The main user-visible benefit is the performance of fetch from a partial clone - specifically, the speedup of the connectivity check done before the fetch. In particular, a no-op fetch into a partial clone on my computer was sped up from 7 seconds to 0.01 seconds. This is a complement to the work in 2df1aa239c ("fetch: forgo full connectivity check if --filter", 2020-01-30), which is the child of the aforementioned 50033772d5. In that commit, the connectivity check *after* the fetch was sped up. The addition of the fast path might cause performance reductions in these cases: - If a partial clone or a fetch into a partial clone fails, Git will fruitlessly run rev-list (it is expected that everything fetched would go into promisor packs, so if that didn't happen, it is most likely that rev-list will fail too). - Any connectivity checks done by receive-pack, in the (in my opinion, unlikely) event that a partial clone serves receive-pack. I think that these cases are rare enough, and the performance reduction in this case minor enough (additional object DB access), that the benefit of avoiding a flag outweighs these. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Reviewed-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-20 22:00:45 +00:00
/*
* Fallback to rev-list with oid and the rest of the
* object IDs provided by fn.
*/
goto no_promisor_pack_found;
promisor_pack_found:
;
connected: refactor iterator to return next object ID directly The object ID iterator used by the connectivity checks returns the next object ID via an out-parameter and then uses a return code to indicate whether an item was found. This is a bit roundabout: instead of a separate error code, we can just return the next object ID directly and use `NULL` pointers as indicator that the iterator got no items left. Furthermore, this avoids a copy of the object ID. Refactor the iterator and all its implementations to return object IDs directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs: Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s] Range (min … max): 29.934 s … 30.406 s 10 runs Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s] Range (min … max): 29.696 s … 29.996 s 10 runs Summary '328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran 1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch' While this 1% speedup could be labelled as statistically insignificant, the speedup is consistent on my machine. Furthermore, this is an end to end test, so it is expected that the improvement in the connectivity check itself is more significant. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 13:09:50 +00:00
} while ((oid = fn(cb_data)) != NULL);
return 0;
}
connected: always use partial clone optimization With 50033772d5 ("connected: verify promisor-ness of partial clone", 2020-01-30), the fast path (checking promisor packs) in check_connected() now passes a subset of the slow path (rev-list) - if all objects to be checked are found in promisor packs, both the fast path and the slow path will pass; otherwise, the fast path will definitely not pass. This means that we can always attempt the fast path whenever we need to do the slow path. The fast path is currently guarded by a flag; therefore, remove that flag. Also, make the fast path fallback to the slow path - if the fast path fails, the failing OID and all remaining OIDs will be passed to rev-list. The main user-visible benefit is the performance of fetch from a partial clone - specifically, the speedup of the connectivity check done before the fetch. In particular, a no-op fetch into a partial clone on my computer was sped up from 7 seconds to 0.01 seconds. This is a complement to the work in 2df1aa239c ("fetch: forgo full connectivity check if --filter", 2020-01-30), which is the child of the aforementioned 50033772d5. In that commit, the connectivity check *after* the fetch was sped up. The addition of the fast path might cause performance reductions in these cases: - If a partial clone or a fetch into a partial clone fails, Git will fruitlessly run rev-list (it is expected that everything fetched would go into promisor packs, so if that didn't happen, it is most likely that rev-list will fail too). - Any connectivity checks done by receive-pack, in the (in my opinion, unlikely) event that a partial clone serves receive-pack. I think that these cases are rare enough, and the performance reduction in this case minor enough (additional object DB access), that the benefit of avoiding a flag outweighs these. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Reviewed-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-20 22:00:45 +00:00
no_promisor_pack_found:
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 10:30:40 +00:00
if (opt->shallow_file) {
strvec_push(&rev_list.args, "--shallow-file");
strvec_push(&rev_list.args, opt->shallow_file);
}
strvec_push(&rev_list.args,"rev-list");
strvec_push(&rev_list.args, "--objects");
strvec_push(&rev_list.args, "--stdin");
if (has_promisor_remote())
strvec_push(&rev_list.args, "--exclude-promisor-objects");
fetch-pack: write shallow, then check connectivity When fetching, connectivity is checked after the shallow file is updated. There are 2 issues with this: (1) the connectivity check is only performed up to ancestors of existing refs (which is not thorough enough if we were deepening an existing ref in the first place), and (2) there is no rollback of the shallow file if the connectivity check fails. To solve (1), update the connectivity check to check the ancestry chain completely in the case of a deepening fetch by refraining from passing "--not --all" when invoking rev-list in connected.c. To solve (2), have fetch_pack() perform its own connectivity check before updating the shallow file. To support existing use cases in which "git fetch-pack" is used to download objects without much regard as to the connectivity of the resulting objects with respect to the existing repository, the connectivity check is only done if necessary (that is, the fetch is not a clone, and the fetch involves shallow/deepen functionality). "git fetch" still performs its own connectivity check, preserving correctness but sometimes performing redundant work. This redundancy is mitigated by the fact that fetch_pack() reports if it has performed a connectivity check itself, and if the transport supports connect or stateless-connect, it will bubble up that report so that "git fetch" knows not to perform the connectivity check in such a case. This was noticed when a user tried to deepen an existing repository by fetching with --no-shallow from a server that did not send all necessary objects - the connectivity check as run by "git fetch" succeeded, but a subsequent "git fsck" failed. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-02 22:08:43 +00:00
if (!opt->is_deepening_fetch) {
strvec_push(&rev_list.args, "--not");
strvec_push(&rev_list.args, "--all");
fetch-pack: write shallow, then check connectivity When fetching, connectivity is checked after the shallow file is updated. There are 2 issues with this: (1) the connectivity check is only performed up to ancestors of existing refs (which is not thorough enough if we were deepening an existing ref in the first place), and (2) there is no rollback of the shallow file if the connectivity check fails. To solve (1), update the connectivity check to check the ancestry chain completely in the case of a deepening fetch by refraining from passing "--not --all" when invoking rev-list in connected.c. To solve (2), have fetch_pack() perform its own connectivity check before updating the shallow file. To support existing use cases in which "git fetch-pack" is used to download objects without much regard as to the connectivity of the resulting objects with respect to the existing repository, the connectivity check is only done if necessary (that is, the fetch is not a clone, and the fetch involves shallow/deepen functionality). "git fetch" still performs its own connectivity check, preserving correctness but sometimes performing redundant work. This redundancy is mitigated by the fact that fetch_pack() reports if it has performed a connectivity check itself, and if the transport supports connect or stateless-connect, it will bubble up that report so that "git fetch" knows not to perform the connectivity check in such a case. This was noticed when a user tried to deepen an existing repository by fetching with --no-shallow from a server that did not send all necessary objects - the connectivity check as run by "git fetch" succeeded, but a subsequent "git fsck" failed. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-02 22:08:43 +00:00
}
strvec_push(&rev_list.args, "--quiet");
strvec_push(&rev_list.args, "--alternate-refs");
if (opt->progress)
strvec_pushf(&rev_list.args, "--progress=%s",
_("Checking connectivity"));
rev_list.git_cmd = 1;
if (opt->env)
strvec_pushv(&rev_list.env_array, opt->env);
rev_list.in = -1;
rev_list.no_stdout = 1;
if (opt->err_fd)
rev_list.err = opt->err_fd;
else
rev_list.no_stderr = opt->quiet;
if (start_command(&rev_list))
return error(_("Could not run 'git rev-list'"));
sigchain_push(SIGPIPE, SIG_IGN);
rev_list_in = xfdopen(rev_list.in, "w");
do {
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 01:16:17 +00:00
/*
* If index-pack already checked that:
* - there are no dangling pointers in the new pack
* - the pack is self contained
* Then if the updated ref is in the new pack, then we
* are sure the ref is good and not sending it to
* rev-list for verification.
*/
connected: refactor iterator to return next object ID directly The object ID iterator used by the connectivity checks returns the next object ID via an out-parameter and then uses a return code to indicate whether an item was found. This is a bit roundabout: instead of a separate error code, we can just return the next object ID directly and use `NULL` pointers as indicator that the iterator got no items left. Furthermore, this avoids a copy of the object ID. Refactor the iterator and all its implementations to return object IDs directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs: Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s] Range (min … max): 29.934 s … 30.406 s 10 runs Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s] Range (min … max): 29.696 s … 29.996 s 10 runs Summary '328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran 1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch' While this 1% speedup could be labelled as statistically insignificant, the speedup is consistent on my machine. Furthermore, this is an end to end test, so it is expected that the improvement in the connectivity check itself is more significant. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 13:09:50 +00:00
if (new_pack && find_pack_entry_one(oid->hash, new_pack))
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 01:16:17 +00:00
continue;
connected: refactor iterator to return next object ID directly The object ID iterator used by the connectivity checks returns the next object ID via an out-parameter and then uses a return code to indicate whether an item was found. This is a bit roundabout: instead of a separate error code, we can just return the next object ID directly and use `NULL` pointers as indicator that the iterator got no items left. Furthermore, this avoids a copy of the object ID. Refactor the iterator and all its implementations to return object IDs directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs: Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s] Range (min … max): 29.934 s … 30.406 s 10 runs Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s] Range (min … max): 29.696 s … 29.996 s 10 runs Summary '328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran 1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch' While this 1% speedup could be labelled as statistically insignificant, the speedup is consistent on my machine. Furthermore, this is an end to end test, so it is expected that the improvement in the connectivity check itself is more significant. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 13:09:50 +00:00
if (fprintf(rev_list_in, "%s\n", oid_to_hex(oid)) < 0)
break;
connected: refactor iterator to return next object ID directly The object ID iterator used by the connectivity checks returns the next object ID via an out-parameter and then uses a return code to indicate whether an item was found. This is a bit roundabout: instead of a separate error code, we can just return the next object ID directly and use `NULL` pointers as indicator that the iterator got no items left. Furthermore, this avoids a copy of the object ID. Refactor the iterator and all its implementations to return object IDs directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs: Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s] Range (min … max): 29.934 s … 30.406 s 10 runs Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s] Range (min … max): 29.696 s … 29.996 s 10 runs Summary '328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran 1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch' While this 1% speedup could be labelled as statistically insignificant, the speedup is consistent on my machine. Furthermore, this is an end to end test, so it is expected that the improvement in the connectivity check itself is more significant. Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 13:09:50 +00:00
} while ((oid = fn(cb_data)) != NULL);
if (ferror(rev_list_in) || fflush(rev_list_in)) {
if (errno != EPIPE && errno != EINVAL)
error_errno(_("failed write to rev-list"));
err = -1;
}
if (fclose(rev_list_in))
err = error_errno(_("failed to close rev-list's stdin"));
sigchain_pop(SIGPIPE);
return finish_command(&rev_list) || err;
}