development/git
development/git
1
0
Fork 0
mirror of https://github.com/git/git synced 2024-09-12 21:04:12 +00:00
Code Issues Packages Projects Releases Wiki Activity
git/t/t4216-log-bloom.sh

309 lines
9 KiB
Bash
Raw Normal View History

t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
#!/bin/sh
test_description='git log for a path with Bloom filters'
. ./test-lib.sh
GIT_TEST_COMMIT_GRAPH=0
GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS=0
test_expect_success 'setup test - repo, commits, commit graph, log outputs' '
git init &&
mkdir A A/B A/B/C &&
test_commit c1 A/file1 &&
test_commit c2 A/B/file2 &&
test_commit c3 A/B/C/file3 &&
test_commit c4 A/file1 &&
test_commit c5 A/B/file2 &&
test_commit c6 A/B/C/file3 &&
test_commit c7 A/file1 &&
test_commit c8 A/B/file2 &&
test_commit c9 A/B/C/file3 &&
test_commit c10 file_to_be_deleted &&
git checkout -b side HEAD~4 &&
test_commit side-1 file4 &&
git checkout master &&
git merge side &&
test_commit c11 file5 &&
mv file5 file5_renamed &&
git add file5_renamed &&
git commit -m "rename" &&
rm file_to_be_deleted &&
git add . &&
git commit -m "file removed" &&
bloom: encode out-of-bounds filters as non-empty When a changed-path Bloom filter has either zero, or more than a certain number (commonly 512) of entries, the commit-graph machinery encodes it as "missing". More specifically, it sets the indices adjacent in the BIDX chunk as equal to each other to indicate a "length 0" filter; that is, that the filter occupies zero bytes on disk. This has heretofore been fine, since the commit-graph machinery has no need to care about these filters with too few or too many changed paths. Both cases act like no filter has been generated at all, and so there is no need to store them. In a subsequent commit, however, the commit-graph machinery will learn to only compute Bloom filters for some commits in the current commit-graph layer. This is a change from the current implementation which computes Bloom filters for all commits that are in the layer being written. Critically for this patch, only computing some of the Bloom filters means adding a third state for length 0 Bloom filters: zero entries, too many entries, or "hasn't been computed". It will be important for that future patch to distinguish between "not representable" (i.e., zero or too-many changed paths), and "hasn't been computed". In particular, we don't want to waste time recomputing filters that have already been computed. To that end, change how we store Bloom filters in the "computed but not representable" category: - Bloom filters with no entries are stored as a single byte with all bits low (i.e., all queries to that Bloom filter will return "definitely not") - Bloom filters with too many entries are stored as a single byte with all bits set high (i.e., all queries to that Bloom filter will return "maybe"). These rules are sufficient to not incur a behavior change by changing the on-disk representation of these two classes. Likewise, no specification changes are necessary for the commit-graph format, either: - Filters that were previously empty will be recomputed and stored according to the new rules, and - old clients reading filters generated by new clients will interpret the filters correctly and be none the wiser to how they were generated. Clients will invoke the Bloom machinery in more cases than before, but this can be addressed by returning a NULL filter when all bits are set high. This can be addressed in a future patch. Note that this does increase the size of on-disk commit-graphs, but far less than other proposals. In particular, this is generally more efficient than storing a bitmap for which commits haven't computed their Bloom filters. Storing a bitmap incurs a penalty of one bit per commit, whereas storing explicit filters as above incurs a penalty of one byte per too-large or empty commit. In practice, these boundary commits likely occupy a small proportion of the overall number of commits, and so the size penalty is likely smaller than storing a bitmap for all commits. See, for example, these relative proportions of such boundary commits (collected by SZEDER Gábor): | Percentage of | commit-graph | | | commits modifying | file size | | ├────────┬──────────────┼───────────────────┤ pct. | | 0 path | >= 512 paths | before | after | change | ┌────────────────┼────────┼──────────────┼─────────┼─────────┼───────────┤ | android-base | 13.20% | 0.13% | 37.468M | 37.534M | +0.1741 % | | cmssw | 0.15% | 0.23% | 17.118M | 17.119M | +0.0091 % | | cpython | 3.07% | 0.01% | 7.967M | 7.971M | +0.0423 % | | elasticsearch | 0.70% | 1.00% | 8.833M | 8.835M | +0.0128 % | | gcc | 0.00% | 0.08% | 16.073M | 16.074M | +0.0030 % | | gecko-dev | 0.14% | 0.64% | 59.868M | 59.874M | +0.0105 % | | git | 0.11% | 0.02% | 3.895M | 3.895M | +0.0020 % | | glibc | 0.02% | 0.10% | 3.555M | 3.555M | +0.0021 % | | go | 0.00% | 0.07% | 3.186M | 3.186M | +0.0018 % | | homebrew-cask | 0.40% | 0.02% | 7.035M | 7.035M | +0.0065 % | | homebrew-core | 0.01% | 0.01% | 11.611M | 11.611M | +0.0002 % | | jdk | 0.26% | 5.64% | 5.537M | 5.540M | +0.0590 % | | linux | 0.01% | 0.51% | 63.735M | 63.740M | +0.0073 % | | llvm-project | 0.12% | 0.03% | 25.515M | 25.516M | +0.0050 % | | rails | 0.10% | 0.10% | 6.252M | 6.252M | +0.0027 % | | rust | 0.07% | 0.17% | 9.364M | 9.364M | +0.0033 % | | tensorflow | 0.09% | 1.02% | 7.009M | 7.010M | +0.0158 % | | webkit | 0.05% | 0.31% | 17.405M | 17.406M | +0.0047 % | (where the above increase is determined by computing a non-split commit-graph before and after this patch). Given that these projects are all "large" by commit count, the storage cost by writing these filters explicitly is negligible. In the most extreme example, android-base (which has 494,848 commits at the time of writing) would have its commit-graph increase by a modest 68.4 KB. Finally, a test to exercise filters which contain too many changed path entries will be introduced in a subsequent patch. Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Suggested-by: Jakub Narębski <jnareb@gmail.com> Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-18 02:59:44 +00:00
git commit --allow-empty -m "empty" &&
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
git commit-graph write --reachable --changed-paths
'
bloom: encode out-of-bounds filters as non-empty When a changed-path Bloom filter has either zero, or more than a certain number (commonly 512) of entries, the commit-graph machinery encodes it as "missing". More specifically, it sets the indices adjacent in the BIDX chunk as equal to each other to indicate a "length 0" filter; that is, that the filter occupies zero bytes on disk. This has heretofore been fine, since the commit-graph machinery has no need to care about these filters with too few or too many changed paths. Both cases act like no filter has been generated at all, and so there is no need to store them. In a subsequent commit, however, the commit-graph machinery will learn to only compute Bloom filters for some commits in the current commit-graph layer. This is a change from the current implementation which computes Bloom filters for all commits that are in the layer being written. Critically for this patch, only computing some of the Bloom filters means adding a third state for length 0 Bloom filters: zero entries, too many entries, or "hasn't been computed". It will be important for that future patch to distinguish between "not representable" (i.e., zero or too-many changed paths), and "hasn't been computed". In particular, we don't want to waste time recomputing filters that have already been computed. To that end, change how we store Bloom filters in the "computed but not representable" category: - Bloom filters with no entries are stored as a single byte with all bits low (i.e., all queries to that Bloom filter will return "definitely not") - Bloom filters with too many entries are stored as a single byte with all bits set high (i.e., all queries to that Bloom filter will return "maybe"). These rules are sufficient to not incur a behavior change by changing the on-disk representation of these two classes. Likewise, no specification changes are necessary for the commit-graph format, either: - Filters that were previously empty will be recomputed and stored according to the new rules, and - old clients reading filters generated by new clients will interpret the filters correctly and be none the wiser to how they were generated. Clients will invoke the Bloom machinery in more cases than before, but this can be addressed by returning a NULL filter when all bits are set high. This can be addressed in a future patch. Note that this does increase the size of on-disk commit-graphs, but far less than other proposals. In particular, this is generally more efficient than storing a bitmap for which commits haven't computed their Bloom filters. Storing a bitmap incurs a penalty of one bit per commit, whereas storing explicit filters as above incurs a penalty of one byte per too-large or empty commit. In practice, these boundary commits likely occupy a small proportion of the overall number of commits, and so the size penalty is likely smaller than storing a bitmap for all commits. See, for example, these relative proportions of such boundary commits (collected by SZEDER Gábor): | Percentage of | commit-graph | | | commits modifying | file size | | ├────────┬──────────────┼───────────────────┤ pct. | | 0 path | >= 512 paths | before | after | change | ┌────────────────┼────────┼──────────────┼─────────┼─────────┼───────────┤ | android-base | 13.20% | 0.13% | 37.468M | 37.534M | +0.1741 % | | cmssw | 0.15% | 0.23% | 17.118M | 17.119M | +0.0091 % | | cpython | 3.07% | 0.01% | 7.967M | 7.971M | +0.0423 % | | elasticsearch | 0.70% | 1.00% | 8.833M | 8.835M | +0.0128 % | | gcc | 0.00% | 0.08% | 16.073M | 16.074M | +0.0030 % | | gecko-dev | 0.14% | 0.64% | 59.868M | 59.874M | +0.0105 % | | git | 0.11% | 0.02% | 3.895M | 3.895M | +0.0020 % | | glibc | 0.02% | 0.10% | 3.555M | 3.555M | +0.0021 % | | go | 0.00% | 0.07% | 3.186M | 3.186M | +0.0018 % | | homebrew-cask | 0.40% | 0.02% | 7.035M | 7.035M | +0.0065 % | | homebrew-core | 0.01% | 0.01% | 11.611M | 11.611M | +0.0002 % | | jdk | 0.26% | 5.64% | 5.537M | 5.540M | +0.0590 % | | linux | 0.01% | 0.51% | 63.735M | 63.740M | +0.0073 % | | llvm-project | 0.12% | 0.03% | 25.515M | 25.516M | +0.0050 % | | rails | 0.10% | 0.10% | 6.252M | 6.252M | +0.0027 % | | rust | 0.07% | 0.17% | 9.364M | 9.364M | +0.0033 % | | tensorflow | 0.09% | 1.02% | 7.009M | 7.010M | +0.0158 % | | webkit | 0.05% | 0.31% | 17.405M | 17.406M | +0.0047 % | (where the above increase is determined by computing a non-split commit-graph before and after this patch). Given that these projects are all "large" by commit count, the storage cost by writing these filters explicitly is negligible. In the most extreme example, android-base (which has 494,848 commits at the time of writing) would have its commit-graph increase by a modest 68.4 KB. Finally, a test to exercise filters which contain too many changed path entries will be introduced in a subsequent patch. Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Suggested-by: Jakub Narębski <jnareb@gmail.com> Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-18 02:59:44 +00:00
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
graph_read_expect () {
NUM_CHUNKS=5
cat >expect <<- EOF
header: 43475048 1 1 $NUM_CHUNKS 0
num_commits: $1
chunks: oid_fanout oid_lookup commit_metadata bloom_indexes bloom_data
EOF
test-tool read-graph >actual &&
test_cmp expect actual
}
test_expect_success 'commit-graph write wrote out the bloom chunks' '
bloom: encode out-of-bounds filters as non-empty When a changed-path Bloom filter has either zero, or more than a certain number (commonly 512) of entries, the commit-graph machinery encodes it as "missing". More specifically, it sets the indices adjacent in the BIDX chunk as equal to each other to indicate a "length 0" filter; that is, that the filter occupies zero bytes on disk. This has heretofore been fine, since the commit-graph machinery has no need to care about these filters with too few or too many changed paths. Both cases act like no filter has been generated at all, and so there is no need to store them. In a subsequent commit, however, the commit-graph machinery will learn to only compute Bloom filters for some commits in the current commit-graph layer. This is a change from the current implementation which computes Bloom filters for all commits that are in the layer being written. Critically for this patch, only computing some of the Bloom filters means adding a third state for length 0 Bloom filters: zero entries, too many entries, or "hasn't been computed". It will be important for that future patch to distinguish between "not representable" (i.e., zero or too-many changed paths), and "hasn't been computed". In particular, we don't want to waste time recomputing filters that have already been computed. To that end, change how we store Bloom filters in the "computed but not representable" category: - Bloom filters with no entries are stored as a single byte with all bits low (i.e., all queries to that Bloom filter will return "definitely not") - Bloom filters with too many entries are stored as a single byte with all bits set high (i.e., all queries to that Bloom filter will return "maybe"). These rules are sufficient to not incur a behavior change by changing the on-disk representation of these two classes. Likewise, no specification changes are necessary for the commit-graph format, either: - Filters that were previously empty will be recomputed and stored according to the new rules, and - old clients reading filters generated by new clients will interpret the filters correctly and be none the wiser to how they were generated. Clients will invoke the Bloom machinery in more cases than before, but this can be addressed by returning a NULL filter when all bits are set high. This can be addressed in a future patch. Note that this does increase the size of on-disk commit-graphs, but far less than other proposals. In particular, this is generally more efficient than storing a bitmap for which commits haven't computed their Bloom filters. Storing a bitmap incurs a penalty of one bit per commit, whereas storing explicit filters as above incurs a penalty of one byte per too-large or empty commit. In practice, these boundary commits likely occupy a small proportion of the overall number of commits, and so the size penalty is likely smaller than storing a bitmap for all commits. See, for example, these relative proportions of such boundary commits (collected by SZEDER Gábor): | Percentage of | commit-graph | | | commits modifying | file size | | ├────────┬──────────────┼───────────────────┤ pct. | | 0 path | >= 512 paths | before | after | change | ┌────────────────┼────────┼──────────────┼─────────┼─────────┼───────────┤ | android-base | 13.20% | 0.13% | 37.468M | 37.534M | +0.1741 % | | cmssw | 0.15% | 0.23% | 17.118M | 17.119M | +0.0091 % | | cpython | 3.07% | 0.01% | 7.967M | 7.971M | +0.0423 % | | elasticsearch | 0.70% | 1.00% | 8.833M | 8.835M | +0.0128 % | | gcc | 0.00% | 0.08% | 16.073M | 16.074M | +0.0030 % | | gecko-dev | 0.14% | 0.64% | 59.868M | 59.874M | +0.0105 % | | git | 0.11% | 0.02% | 3.895M | 3.895M | +0.0020 % | | glibc | 0.02% | 0.10% | 3.555M | 3.555M | +0.0021 % | | go | 0.00% | 0.07% | 3.186M | 3.186M | +0.0018 % | | homebrew-cask | 0.40% | 0.02% | 7.035M | 7.035M | +0.0065 % | | homebrew-core | 0.01% | 0.01% | 11.611M | 11.611M | +0.0002 % | | jdk | 0.26% | 5.64% | 5.537M | 5.540M | +0.0590 % | | linux | 0.01% | 0.51% | 63.735M | 63.740M | +0.0073 % | | llvm-project | 0.12% | 0.03% | 25.515M | 25.516M | +0.0050 % | | rails | 0.10% | 0.10% | 6.252M | 6.252M | +0.0027 % | | rust | 0.07% | 0.17% | 9.364M | 9.364M | +0.0033 % | | tensorflow | 0.09% | 1.02% | 7.009M | 7.010M | +0.0158 % | | webkit | 0.05% | 0.31% | 17.405M | 17.406M | +0.0047 % | (where the above increase is determined by computing a non-split commit-graph before and after this patch). Given that these projects are all "large" by commit count, the storage cost by writing these filters explicitly is negligible. In the most extreme example, android-base (which has 494,848 commits at the time of writing) would have its commit-graph increase by a modest 68.4 KB. Finally, a test to exercise filters which contain too many changed path entries will be introduced in a subsequent patch. Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Suggested-by: Jakub Narębski <jnareb@gmail.com> Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-18 02:59:44 +00:00
graph_read_expect 16
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
'
# Turn off any inherited trace2 settings for this test.
sane_unset GIT_TRACE2 GIT_TRACE2_PERF GIT_TRACE2_EVENT
sane_unset GIT_TRACE2_PERF_BRIEF
sane_unset GIT_TRACE2_CONFIG_PARAMS
setup () {
t4216: use an '&&'-chain In a759bfa9ee (t4216: add end to end tests for git log with Bloom filters, 2020-04-06), a 'rm' invocation was added without a corresponding '&&' chain. When 'trace.perf' already exists, everything works fine. However, the function can be executed without 'trace.perf' on disk (eg., when the subset of tests run is altered with '--run'), and so the bare 'rm' complains about a missing file. To remove some noise from the test log, invoke 'rm' with '-f', at which point it is sensible to place the 'rm -f' in an '&&'-chain, which is both (1) our usual style, and (2) avoids a broken chain in the future if more commands are added at the beginning of the function. Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-09 15:22:50 +00:00
rm -f "$TRASH_DIRECTORY/trace.perf" &&
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
git -c core.commitGraph=false log --pretty="format:%s" $1 >log_wo_bloom &&
GIT_TRACE2_PERF="$TRASH_DIRECTORY/trace.perf" git -c core.commitGraph=true log --pretty="format:%s" $1 >log_w_bloom
}
test_bloom_filters_used () {
log_args=$1
commit-graph: introduce 'get_bloom_filter_settings()' Many places in the code often need a pointer to the commit-graph's 'struct bloom_filter_settings', in which case they often take the value from the top-most commit-graph. In the non-split case, this works as expected. In the split case, however, things get a little tricky. Not all layers in a chain of incremental commit-graphs are required to themselves have Bloom data, and so whether or not some part of the code uses Bloom filters depends entirely on whether or not the top-most level of the commit-graph chain has Bloom filters. This has been the behavior since Bloom filters were introduced, and has been codified into the tests since a759bfa9ee (t4216: add end to end tests for git log with Bloom filters, 2020-04-06). In fact, t4216.130 requires that Bloom filters are not used in exactly the case described earlier. There is no reason that this needs to be the case, since it is perfectly valid for commits in an earlier layer to have Bloom filters when commits in a newer layer do not. Since Bloom settings are guaranteed in practice to be the same for any layer in a chain that has Bloom data, it is sufficient to traverse the '->base_graph' pointer until either (1) a non-null 'struct bloom_filter_settings *' is found, or (2) until we are at the root of the commit-graph chain. Introduce a 'get_bloom_filter_settings()' function that does just this, and use it instead of purely dereferencing the top-most graph's '->bloom_filter_settings' pointer. While we're at it, add an additional test in t5324 to guard against code in the commit-graph writing machinery that doesn't correctly handle a NULL 'struct bloom_filter *'. Co-authored-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-09 15:22:44 +00:00
bloom_trace_prefix="statistics:{\"filter_not_present\":${2:-0},\"maybe\""
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
setup "$log_args" &&
grep -q "$bloom_trace_prefix" "$TRASH_DIRECTORY/trace.perf" &&
test_cmp log_wo_bloom log_w_bloom &&
test_path_is_file "$TRASH_DIRECTORY/trace.perf"
}
test_bloom_filters_not_used () {
log_args=$1
setup "$log_args" &&
t4216: avoid unnecessary subshell in test_bloom_filters_not_used Seems to trigger a bug in at least OpenBSD's 6.7 sh where it is interpreted as a history lookup and therefore fails 125-126, 128, 130. Remove the subshell and get a space between ! and grep, so tests pass successfully. Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-05-20 03:44:42 +00:00
! grep -q "statistics:{\"filter_not_present\":" "$TRASH_DIRECTORY/trace.perf" &&
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
test_cmp log_wo_bloom log_w_bloom
}
for path in A A/B A/B/C A/file1 A/B/file2 A/B/C/file3 file4 file5 file5_renamed file_to_be_deleted
do
for option in "" \
"--all" \
"--full-history" \
"--full-history --simplify-merges" \
"--simplify-merges" \
"--simplify-by-decoration" \
"--follow" \
"--first-parent" \
"--topo-order" \
"--date-order" \
"--author-date-order" \
"--ancestry-path side..master"
do
test_expect_success "git log option: $option for path: $path" '
commit-graph: respect 'commitGraph.readChangedPaths' Git uses the 'core.commitGraph' configuration value to control whether or not the commit graph is used when parsing commits or performing a traversal. Now that commit-graphs can also contain a section for changed-path Bloom filters, administrators that already have commit-graphs may find it convenient to use those graphs without relying on their changed-path Bloom filters. This can happen, for example, during a staged roll-out, or in the event of an incident. Introduce 'commitGraph.readChangedPaths' to control whether or not Bloom filters are read. Note that this configuration is independent from both: - 'core.commitGraph', to allow flexibility in using all parts of a commit-graph _except_ for its Bloom filters. - The '--changed-paths' option for 'git commit-graph write', to allow reading and writing Bloom filters to be controlled independently. When the variable is set, pretend as if no Bloom data was specified at all. This avoids adding additional special-casing outside of the commit-graph internals. Suggested-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-09 15:23:10 +00:00
test_bloom_filters_used "$option -- $path" &&
test_config commitgraph.readChangedPaths false &&
test_bloom_filters_not_used "$option -- $path"
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
'
done
done
test_expect_success 'git log -- folder works with and without the trailing slash' '
test_bloom_filters_used "-- A" &&
test_bloom_filters_used "-- A/"
'
test_expect_success 'git log for path that does not exist. ' '
test_bloom_filters_used "-- path_does_not_exist"
'
test_expect_success 'git log with --walk-reflogs does not use Bloom filters' '
test_bloom_filters_not_used "--walk-reflogs -- A"
'
test_expect_success 'git log -- multiple path specs does not use Bloom filters' '
test_bloom_filters_not_used "-- file4 A/file1"
'
revision: empty pathspecs should not use Bloom filters The prepare_to_use_bloom_filter() method was not intended to be called on an empty pathspec. However, 'git log -- .' and 'git log' are subtly different: the latter reports all commits while the former will simplify commits that do not change the root tree. This means that the path used to construct the bloom_key might be empty, and that value is not added to the Bloom filter during construction. That means that the results are likely incorrect! To resolve the issue, be careful about the length of the path and stop filling Bloom filters. To be completely sure we do not use them, drop the pointer to the bloom_filter_settings from the commit-graph. That allows our test to look at the trace2 logs to verify no Bloom filter statistics are reported. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:29 +00:00
test_expect_success 'git log -- "." pathspec at root does not use Bloom filters' '
test_bloom_filters_not_used "-- ."
'
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
test_expect_success 'git log with wildcard that resolves to a single path uses Bloom filters' '
test_bloom_filters_used "-- *4" &&
test_bloom_filters_used "-- *renamed"
'
test_expect_success 'git log with wildcard that resolves to a multiple paths does not uses Bloom filters' '
test_bloom_filters_not_used "-- *" &&
test_bloom_filters_not_used "-- file*"
'
test_expect_success 'setup - add commit-graph to the chain without Bloom filters' '
test_commit c14 A/anotherFile2 &&
test_commit c15 A/B/anotherFile2 &&
test_commit c16 A/B/C/anotherFile2 &&
commit-graph: persist existence of changed-paths The changed-path Bloom filters were released in v2.27.0, but have a significant drawback. A user can opt-in to writing the changed-path filters using the "--changed-paths" option to "git commit-graph write" but the next write will drop the filters unless that option is specified. This becomes even more important when considering the interaction with gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of features.experimental). These config options trigger commit-graph writes that the user did not signal, and hence there is no --changed-paths option available. Allow a user that opts-in to the changed-path filters to persist the property of "my commit-graph has changed-path filters" automatically. A user can drop filters using the --no-changed-paths option. In the process, we need to be extremely careful to match the Bloom filter settings as specified by the commit-graph. This will allow future versions of Git to customize these settings, and the version with this change will persist those settings as commit-graphs are rewritten on top. Use the trace2 API to signal the settings used during the write, and check that output in a test after manually adjusting the correct bytes in the commit-graph file. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:24 +00:00
git commit-graph write --reachable --split --no-changed-paths &&
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
test_line_count = 2 .git/objects/info/commit-graphs/commit-graph-chain
'
commit-graph: introduce 'get_bloom_filter_settings()' Many places in the code often need a pointer to the commit-graph's 'struct bloom_filter_settings', in which case they often take the value from the top-most commit-graph. In the non-split case, this works as expected. In the split case, however, things get a little tricky. Not all layers in a chain of incremental commit-graphs are required to themselves have Bloom data, and so whether or not some part of the code uses Bloom filters depends entirely on whether or not the top-most level of the commit-graph chain has Bloom filters. This has been the behavior since Bloom filters were introduced, and has been codified into the tests since a759bfa9ee (t4216: add end to end tests for git log with Bloom filters, 2020-04-06). In fact, t4216.130 requires that Bloom filters are not used in exactly the case described earlier. There is no reason that this needs to be the case, since it is perfectly valid for commits in an earlier layer to have Bloom filters when commits in a newer layer do not. Since Bloom settings are guaranteed in practice to be the same for any layer in a chain that has Bloom data, it is sufficient to traverse the '->base_graph' pointer until either (1) a non-null 'struct bloom_filter_settings *' is found, or (2) until we are at the root of the commit-graph chain. Introduce a 'get_bloom_filter_settings()' function that does just this, and use it instead of purely dereferencing the top-most graph's '->bloom_filter_settings' pointer. While we're at it, add an additional test in t5324 to guard against code in the commit-graph writing machinery that doesn't correctly handle a NULL 'struct bloom_filter *'. Co-authored-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-09 15:22:44 +00:00
test_expect_success 'use Bloom filters even if the latest graph does not have Bloom filters' '
# Ensure that the number of empty filters is equal to the number of
# filters in the latest graph layer to prove that they are loaded (and
# ignored).
test_bloom_filters_used "-- A/B" 3
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
'
test_expect_success 'setup - add commit-graph to the chain with Bloom filters' '
test_commit c17 A/anotherFile3 &&
git commit-graph write --reachable --changed-paths --split &&
test_line_count = 3 .git/objects/info/commit-graphs/commit-graph-chain
'
test_bloom_filters_used_when_some_filters_are_missing () {
log_args=$1
bloom: encode out-of-bounds filters as non-empty When a changed-path Bloom filter has either zero, or more than a certain number (commonly 512) of entries, the commit-graph machinery encodes it as "missing". More specifically, it sets the indices adjacent in the BIDX chunk as equal to each other to indicate a "length 0" filter; that is, that the filter occupies zero bytes on disk. This has heretofore been fine, since the commit-graph machinery has no need to care about these filters with too few or too many changed paths. Both cases act like no filter has been generated at all, and so there is no need to store them. In a subsequent commit, however, the commit-graph machinery will learn to only compute Bloom filters for some commits in the current commit-graph layer. This is a change from the current implementation which computes Bloom filters for all commits that are in the layer being written. Critically for this patch, only computing some of the Bloom filters means adding a third state for length 0 Bloom filters: zero entries, too many entries, or "hasn't been computed". It will be important for that future patch to distinguish between "not representable" (i.e., zero or too-many changed paths), and "hasn't been computed". In particular, we don't want to waste time recomputing filters that have already been computed. To that end, change how we store Bloom filters in the "computed but not representable" category: - Bloom filters with no entries are stored as a single byte with all bits low (i.e., all queries to that Bloom filter will return "definitely not") - Bloom filters with too many entries are stored as a single byte with all bits set high (i.e., all queries to that Bloom filter will return "maybe"). These rules are sufficient to not incur a behavior change by changing the on-disk representation of these two classes. Likewise, no specification changes are necessary for the commit-graph format, either: - Filters that were previously empty will be recomputed and stored according to the new rules, and - old clients reading filters generated by new clients will interpret the filters correctly and be none the wiser to how they were generated. Clients will invoke the Bloom machinery in more cases than before, but this can be addressed by returning a NULL filter when all bits are set high. This can be addressed in a future patch. Note that this does increase the size of on-disk commit-graphs, but far less than other proposals. In particular, this is generally more efficient than storing a bitmap for which commits haven't computed their Bloom filters. Storing a bitmap incurs a penalty of one bit per commit, whereas storing explicit filters as above incurs a penalty of one byte per too-large or empty commit. In practice, these boundary commits likely occupy a small proportion of the overall number of commits, and so the size penalty is likely smaller than storing a bitmap for all commits. See, for example, these relative proportions of such boundary commits (collected by SZEDER Gábor): | Percentage of | commit-graph | | | commits modifying | file size | | ├────────┬──────────────┼───────────────────┤ pct. | | 0 path | >= 512 paths | before | after | change | ┌────────────────┼────────┼──────────────┼─────────┼─────────┼───────────┤ | android-base | 13.20% | 0.13% | 37.468M | 37.534M | +0.1741 % | | cmssw | 0.15% | 0.23% | 17.118M | 17.119M | +0.0091 % | | cpython | 3.07% | 0.01% | 7.967M | 7.971M | +0.0423 % | | elasticsearch | 0.70% | 1.00% | 8.833M | 8.835M | +0.0128 % | | gcc | 0.00% | 0.08% | 16.073M | 16.074M | +0.0030 % | | gecko-dev | 0.14% | 0.64% | 59.868M | 59.874M | +0.0105 % | | git | 0.11% | 0.02% | 3.895M | 3.895M | +0.0020 % | | glibc | 0.02% | 0.10% | 3.555M | 3.555M | +0.0021 % | | go | 0.00% | 0.07% | 3.186M | 3.186M | +0.0018 % | | homebrew-cask | 0.40% | 0.02% | 7.035M | 7.035M | +0.0065 % | | homebrew-core | 0.01% | 0.01% | 11.611M | 11.611M | +0.0002 % | | jdk | 0.26% | 5.64% | 5.537M | 5.540M | +0.0590 % | | linux | 0.01% | 0.51% | 63.735M | 63.740M | +0.0073 % | | llvm-project | 0.12% | 0.03% | 25.515M | 25.516M | +0.0050 % | | rails | 0.10% | 0.10% | 6.252M | 6.252M | +0.0027 % | | rust | 0.07% | 0.17% | 9.364M | 9.364M | +0.0033 % | | tensorflow | 0.09% | 1.02% | 7.009M | 7.010M | +0.0158 % | | webkit | 0.05% | 0.31% | 17.405M | 17.406M | +0.0047 % | (where the above increase is determined by computing a non-split commit-graph before and after this patch). Given that these projects are all "large" by commit count, the storage cost by writing these filters explicitly is negligible. In the most extreme example, android-base (which has 494,848 commits at the time of writing) would have its commit-graph increase by a modest 68.4 KB. Finally, a test to exercise filters which contain too many changed path entries will be introduced in a subsequent patch. Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Suggested-by: Jakub Narębski <jnareb@gmail.com> Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-18 02:59:44 +00:00
bloom_trace_prefix="statistics:{\"filter_not_present\":3,\"maybe\":6,\"definitely_not\":9"
t4216: add end to end tests for git log with Bloom filters These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06 16:59:54 +00:00
setup "$log_args" &&
grep -q "$bloom_trace_prefix" "$TRASH_DIRECTORY/trace.perf" &&
test_cmp log_wo_bloom log_w_bloom
}
test_expect_success 'Use Bloom filters if they exist in the latest but not all commit graphs in the chain.' '
test_bloom_filters_used_when_some_filters_are_missing "-- A/B"
'
commit-graph: persist existence of changed-paths The changed-path Bloom filters were released in v2.27.0, but have a significant drawback. A user can opt-in to writing the changed-path filters using the "--changed-paths" option to "git commit-graph write" but the next write will drop the filters unless that option is specified. This becomes even more important when considering the interaction with gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of features.experimental). These config options trigger commit-graph writes that the user did not signal, and hence there is no --changed-paths option available. Allow a user that opts-in to the changed-path filters to persist the property of "my commit-graph has changed-path filters" automatically. A user can drop filters using the --no-changed-paths option. In the process, we need to be extremely careful to match the Bloom filter settings as specified by the commit-graph. This will allow future versions of Git to customize these settings, and the version with this change will persist those settings as commit-graphs are rewritten on top. Use the trace2 API to signal the settings used during the write, and check that output in a test after manually adjusting the correct bytes in the commit-graph file. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:24 +00:00
test_expect_success 'persist filter settings' '
test_when_finished rm -rf .git/objects/info/commit-graph* &&
rm -rf .git/objects/info/commit-graph* &&
GIT_TRACE2_EVENT="$(pwd)/trace2.txt" \
GIT_TRACE2_EVENT_NESTING=5 \
GIT_TEST_BLOOM_SETTINGS_NUM_HASHES=9 \
GIT_TEST_BLOOM_SETTINGS_BITS_PER_ENTRY=15 \
git commit-graph write --reachable --changed-paths &&
commit-graph.c: store maximum changed paths For now, we assume that there is a fixed constant describing the maximum number of changed paths we are willing to store in a Bloom filter. Prepare for that to (at least partially) not be the case by making it a member of the 'struct bloom_filter_settings'. This will be helpful in the subsequent patches by reducing the size of test cases that exercise storing too many changed paths, as well as preparing for an eventual future in which this value might change. This patch alone does not cause newly generated Bloom filters to use a custom upper-bound on the maximum number of changed paths a single Bloom filter can hold, that will occur in a later patch. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-17 13:34:42 +00:00
grep "{\"hash_version\":1,\"num_hashes\":9,\"bits_per_entry\":15,\"max_changed_paths\":512" trace2.txt &&
commit-graph: persist existence of changed-paths The changed-path Bloom filters were released in v2.27.0, but have a significant drawback. A user can opt-in to writing the changed-path filters using the "--changed-paths" option to "git commit-graph write" but the next write will drop the filters unless that option is specified. This becomes even more important when considering the interaction with gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of features.experimental). These config options trigger commit-graph writes that the user did not signal, and hence there is no --changed-paths option available. Allow a user that opts-in to the changed-path filters to persist the property of "my commit-graph has changed-path filters" automatically. A user can drop filters using the --no-changed-paths option. In the process, we need to be extremely careful to match the Bloom filter settings as specified by the commit-graph. This will allow future versions of Git to customize these settings, and the version with this change will persist those settings as commit-graphs are rewritten on top. Use the trace2 API to signal the settings used during the write, and check that output in a test after manually adjusting the correct bytes in the commit-graph file. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:24 +00:00
GIT_TRACE2_EVENT="$(pwd)/trace2-auto.txt" \
GIT_TRACE2_EVENT_NESTING=5 \
git commit-graph write --reachable --changed-paths &&
commit-graph.c: store maximum changed paths For now, we assume that there is a fixed constant describing the maximum number of changed paths we are willing to store in a Bloom filter. Prepare for that to (at least partially) not be the case by making it a member of the 'struct bloom_filter_settings'. This will be helpful in the subsequent patches by reducing the size of test cases that exercise storing too many changed paths, as well as preparing for an eventual future in which this value might change. This patch alone does not cause newly generated Bloom filters to use a custom upper-bound on the maximum number of changed paths a single Bloom filter can hold, that will occur in a later patch. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-17 13:34:42 +00:00
grep "{\"hash_version\":1,\"num_hashes\":9,\"bits_per_entry\":15,\"max_changed_paths\":512" trace2-auto.txt
commit-graph: persist existence of changed-paths The changed-path Bloom filters were released in v2.27.0, but have a significant drawback. A user can opt-in to writing the changed-path filters using the "--changed-paths" option to "git commit-graph write" but the next write will drop the filters unless that option is specified. This becomes even more important when considering the interaction with gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of features.experimental). These config options trigger commit-graph writes that the user did not signal, and hence there is no --changed-paths option available. Allow a user that opts-in to the changed-path filters to persist the property of "my commit-graph has changed-path filters" automatically. A user can drop filters using the --no-changed-paths option. In the process, we need to be extremely careful to match the Bloom filter settings as specified by the commit-graph. This will allow future versions of Git to customize these settings, and the version with this change will persist those settings as commit-graphs are rewritten on top. Use the trace2 API to signal the settings used during the write, and check that output in a test after manually adjusting the correct bytes in the commit-graph file. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:24 +00:00
'
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
test_max_changed_paths () {
grep "\"max_changed_paths\":$1" $2
}
bloom: encode out-of-bounds filters as non-empty When a changed-path Bloom filter has either zero, or more than a certain number (commonly 512) of entries, the commit-graph machinery encodes it as "missing". More specifically, it sets the indices adjacent in the BIDX chunk as equal to each other to indicate a "length 0" filter; that is, that the filter occupies zero bytes on disk. This has heretofore been fine, since the commit-graph machinery has no need to care about these filters with too few or too many changed paths. Both cases act like no filter has been generated at all, and so there is no need to store them. In a subsequent commit, however, the commit-graph machinery will learn to only compute Bloom filters for some commits in the current commit-graph layer. This is a change from the current implementation which computes Bloom filters for all commits that are in the layer being written. Critically for this patch, only computing some of the Bloom filters means adding a third state for length 0 Bloom filters: zero entries, too many entries, or "hasn't been computed". It will be important for that future patch to distinguish between "not representable" (i.e., zero or too-many changed paths), and "hasn't been computed". In particular, we don't want to waste time recomputing filters that have already been computed. To that end, change how we store Bloom filters in the "computed but not representable" category: - Bloom filters with no entries are stored as a single byte with all bits low (i.e., all queries to that Bloom filter will return "definitely not") - Bloom filters with too many entries are stored as a single byte with all bits set high (i.e., all queries to that Bloom filter will return "maybe"). These rules are sufficient to not incur a behavior change by changing the on-disk representation of these two classes. Likewise, no specification changes are necessary for the commit-graph format, either: - Filters that were previously empty will be recomputed and stored according to the new rules, and - old clients reading filters generated by new clients will interpret the filters correctly and be none the wiser to how they were generated. Clients will invoke the Bloom machinery in more cases than before, but this can be addressed by returning a NULL filter when all bits are set high. This can be addressed in a future patch. Note that this does increase the size of on-disk commit-graphs, but far less than other proposals. In particular, this is generally more efficient than storing a bitmap for which commits haven't computed their Bloom filters. Storing a bitmap incurs a penalty of one bit per commit, whereas storing explicit filters as above incurs a penalty of one byte per too-large or empty commit. In practice, these boundary commits likely occupy a small proportion of the overall number of commits, and so the size penalty is likely smaller than storing a bitmap for all commits. See, for example, these relative proportions of such boundary commits (collected by SZEDER Gábor): | Percentage of | commit-graph | | | commits modifying | file size | | ├────────┬──────────────┼───────────────────┤ pct. | | 0 path | >= 512 paths | before | after | change | ┌────────────────┼────────┼──────────────┼─────────┼─────────┼───────────┤ | android-base | 13.20% | 0.13% | 37.468M | 37.534M | +0.1741 % | | cmssw | 0.15% | 0.23% | 17.118M | 17.119M | +0.0091 % | | cpython | 3.07% | 0.01% | 7.967M | 7.971M | +0.0423 % | | elasticsearch | 0.70% | 1.00% | 8.833M | 8.835M | +0.0128 % | | gcc | 0.00% | 0.08% | 16.073M | 16.074M | +0.0030 % | | gecko-dev | 0.14% | 0.64% | 59.868M | 59.874M | +0.0105 % | | git | 0.11% | 0.02% | 3.895M | 3.895M | +0.0020 % | | glibc | 0.02% | 0.10% | 3.555M | 3.555M | +0.0021 % | | go | 0.00% | 0.07% | 3.186M | 3.186M | +0.0018 % | | homebrew-cask | 0.40% | 0.02% | 7.035M | 7.035M | +0.0065 % | | homebrew-core | 0.01% | 0.01% | 11.611M | 11.611M | +0.0002 % | | jdk | 0.26% | 5.64% | 5.537M | 5.540M | +0.0590 % | | linux | 0.01% | 0.51% | 63.735M | 63.740M | +0.0073 % | | llvm-project | 0.12% | 0.03% | 25.515M | 25.516M | +0.0050 % | | rails | 0.10% | 0.10% | 6.252M | 6.252M | +0.0027 % | | rust | 0.07% | 0.17% | 9.364M | 9.364M | +0.0033 % | | tensorflow | 0.09% | 1.02% | 7.009M | 7.010M | +0.0158 % | | webkit | 0.05% | 0.31% | 17.405M | 17.406M | +0.0047 % | (where the above increase is determined by computing a non-split commit-graph before and after this patch). Given that these projects are all "large" by commit count, the storage cost by writing these filters explicitly is negligible. In the most extreme example, android-base (which has 494,848 commits at the time of writing) would have its commit-graph increase by a modest 68.4 KB. Finally, a test to exercise filters which contain too many changed path entries will be introduced in a subsequent patch. Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Suggested-by: Jakub Narębski <jnareb@gmail.com> Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-18 02:59:44 +00:00
test_filter_not_computed () {
grep "\"key\":\"filter-not-computed\",\"value\":\"$1\"" $2
}
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
test_filter_computed () {
grep "\"key\":\"filter-computed\",\"value\":\"$1\"" $2
}
bloom: encode out-of-bounds filters as non-empty When a changed-path Bloom filter has either zero, or more than a certain number (commonly 512) of entries, the commit-graph machinery encodes it as "missing". More specifically, it sets the indices adjacent in the BIDX chunk as equal to each other to indicate a "length 0" filter; that is, that the filter occupies zero bytes on disk. This has heretofore been fine, since the commit-graph machinery has no need to care about these filters with too few or too many changed paths. Both cases act like no filter has been generated at all, and so there is no need to store them. In a subsequent commit, however, the commit-graph machinery will learn to only compute Bloom filters for some commits in the current commit-graph layer. This is a change from the current implementation which computes Bloom filters for all commits that are in the layer being written. Critically for this patch, only computing some of the Bloom filters means adding a third state for length 0 Bloom filters: zero entries, too many entries, or "hasn't been computed". It will be important for that future patch to distinguish between "not representable" (i.e., zero or too-many changed paths), and "hasn't been computed". In particular, we don't want to waste time recomputing filters that have already been computed. To that end, change how we store Bloom filters in the "computed but not representable" category: - Bloom filters with no entries are stored as a single byte with all bits low (i.e., all queries to that Bloom filter will return "definitely not") - Bloom filters with too many entries are stored as a single byte with all bits set high (i.e., all queries to that Bloom filter will return "maybe"). These rules are sufficient to not incur a behavior change by changing the on-disk representation of these two classes. Likewise, no specification changes are necessary for the commit-graph format, either: - Filters that were previously empty will be recomputed and stored according to the new rules, and - old clients reading filters generated by new clients will interpret the filters correctly and be none the wiser to how they were generated. Clients will invoke the Bloom machinery in more cases than before, but this can be addressed by returning a NULL filter when all bits are set high. This can be addressed in a future patch. Note that this does increase the size of on-disk commit-graphs, but far less than other proposals. In particular, this is generally more efficient than storing a bitmap for which commits haven't computed their Bloom filters. Storing a bitmap incurs a penalty of one bit per commit, whereas storing explicit filters as above incurs a penalty of one byte per too-large or empty commit. In practice, these boundary commits likely occupy a small proportion of the overall number of commits, and so the size penalty is likely smaller than storing a bitmap for all commits. See, for example, these relative proportions of such boundary commits (collected by SZEDER Gábor): | Percentage of | commit-graph | | | commits modifying | file size | | ├────────┬──────────────┼───────────────────┤ pct. | | 0 path | >= 512 paths | before | after | change | ┌────────────────┼────────┼──────────────┼─────────┼─────────┼───────────┤ | android-base | 13.20% | 0.13% | 37.468M | 37.534M | +0.1741 % | | cmssw | 0.15% | 0.23% | 17.118M | 17.119M | +0.0091 % | | cpython | 3.07% | 0.01% | 7.967M | 7.971M | +0.0423 % | | elasticsearch | 0.70% | 1.00% | 8.833M | 8.835M | +0.0128 % | | gcc | 0.00% | 0.08% | 16.073M | 16.074M | +0.0030 % | | gecko-dev | 0.14% | 0.64% | 59.868M | 59.874M | +0.0105 % | | git | 0.11% | 0.02% | 3.895M | 3.895M | +0.0020 % | | glibc | 0.02% | 0.10% | 3.555M | 3.555M | +0.0021 % | | go | 0.00% | 0.07% | 3.186M | 3.186M | +0.0018 % | | homebrew-cask | 0.40% | 0.02% | 7.035M | 7.035M | +0.0065 % | | homebrew-core | 0.01% | 0.01% | 11.611M | 11.611M | +0.0002 % | | jdk | 0.26% | 5.64% | 5.537M | 5.540M | +0.0590 % | | linux | 0.01% | 0.51% | 63.735M | 63.740M | +0.0073 % | | llvm-project | 0.12% | 0.03% | 25.515M | 25.516M | +0.0050 % | | rails | 0.10% | 0.10% | 6.252M | 6.252M | +0.0027 % | | rust | 0.07% | 0.17% | 9.364M | 9.364M | +0.0033 % | | tensorflow | 0.09% | 1.02% | 7.009M | 7.010M | +0.0158 % | | webkit | 0.05% | 0.31% | 17.405M | 17.406M | +0.0047 % | (where the above increase is determined by computing a non-split commit-graph before and after this patch). Given that these projects are all "large" by commit count, the storage cost by writing these filters explicitly is negligible. In the most extreme example, android-base (which has 494,848 commits at the time of writing) would have its commit-graph increase by a modest 68.4 KB. Finally, a test to exercise filters which contain too many changed path entries will be introduced in a subsequent patch. Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Suggested-by: Jakub Narębski <jnareb@gmail.com> Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-18 02:59:44 +00:00
test_filter_trunc_empty () {
grep "\"key\":\"filter-trunc-empty\",\"value\":\"$1\"" $2
}
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
test_filter_trunc_large () {
grep "\"key\":\"filter-trunc-large\",\"value\":\"$1\"" $2
}
bloom: fix logic in get_bloom_filter() The get_bloom_filter() method is a bit complicated in some parts where it does not need to be. In particular, it needs to return a NULL filter only when compute_if_not_present is zero AND the filter data cannot be loaded from a commit-graph file. This currently happens by accident because the commit-graph does not load changed-path Bloom filters from an existing commit-graph when writing a new one. This will change in a later patch. Also clean up some style issues while we are here. One side-effect of returning a NULL filter is that the filters that are reported as "too large" will now be reported as NULL insead of length zero. This case was not properly covered before, so add a test. Further, remote the counting of the zero-length filters from revision.c and the trace2 logs. Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:23 +00:00
test_expect_success 'correctly report changes over limit' '
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
git init limits &&
bloom: fix logic in get_bloom_filter() The get_bloom_filter() method is a bit complicated in some parts where it does not need to be. In particular, it needs to return a NULL filter only when compute_if_not_present is zero AND the filter data cannot be loaded from a commit-graph file. This currently happens by accident because the commit-graph does not load changed-path Bloom filters from an existing commit-graph when writing a new one. This will change in a later patch. Also clean up some style issues while we are here. One side-effect of returning a NULL filter is that the filters that are reported as "too large" will now be reported as NULL insead of length zero. This case was not properly covered before, so add a test. Further, remote the counting of the zero-length filters from revision.c and the trace2 logs. Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:23 +00:00
(
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
cd limits &&
mkdir d &&
mkdir d/e &&
for i in $(test_seq 1 2)
bloom: fix logic in get_bloom_filter() The get_bloom_filter() method is a bit complicated in some parts where it does not need to be. In particular, it needs to return a NULL filter only when compute_if_not_present is zero AND the filter data cannot be loaded from a commit-graph file. This currently happens by accident because the commit-graph does not load changed-path Bloom filters from an existing commit-graph when writing a new one. This will change in a later patch. Also clean up some style issues while we are here. One side-effect of returning a NULL filter is that the filters that are reported as "too large" will now be reported as NULL insead of length zero. This case was not properly covered before, so add a test. Further, remote the counting of the zero-length filters from revision.c and the trace2 logs. Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:23 +00:00
do
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
printf $i >d/file$i.txt &&
printf $i >d/e/file$i.txt || return 1
bloom: fix logic in get_bloom_filter() The get_bloom_filter() method is a bit complicated in some parts where it does not need to be. In particular, it needs to return a NULL filter only when compute_if_not_present is zero AND the filter data cannot be loaded from a commit-graph file. This currently happens by accident because the commit-graph does not load changed-path Bloom filters from an existing commit-graph when writing a new one. This will change in a later patch. Also clean up some style issues while we are here. One side-effect of returning a NULL filter is that the filters that are reported as "too large" will now be reported as NULL insead of length zero. This case was not properly covered before, so add a test. Further, remote the counting of the zero-length filters from revision.c and the trace2 logs. Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:23 +00:00
done &&
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
mkdir mode &&
printf bash >mode/script.sh &&
mkdir foo &&
touch foo/bar &&
touch foo.txt &&
git add d foo foo.txt mode &&
bloom: fix logic in get_bloom_filter() The get_bloom_filter() method is a bit complicated in some parts where it does not need to be. In particular, it needs to return a NULL filter only when compute_if_not_present is zero AND the filter data cannot be loaded from a commit-graph file. This currently happens by accident because the commit-graph does not load changed-path Bloom filters from an existing commit-graph when writing a new one. This will change in a later patch. Also clean up some style issues while we are here. One side-effect of returning a NULL filter is that the filters that are reported as "too large" will now be reported as NULL insead of length zero. This case was not properly covered before, so add a test. Further, remote the counting of the zero-length filters from revision.c and the trace2 logs. Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:23 +00:00
git commit -m "files" &&
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
# Commit has 7 file and 4 directory adds
GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=10 \
GIT_TRACE2_EVENT="$(pwd)/trace" \
git commit-graph write --reachable --changed-paths &&
test_max_changed_paths 10 trace &&
test_filter_computed 1 trace &&
test_filter_trunc_large 1 trace &&
for path in $(git ls-tree -r --name-only HEAD)
do
git -c commitGraph.readChangedPaths=false log \
-- $path >expect &&
git log -- $path >actual &&
test_cmp expect actual || return 1
done &&
# Make a variety of path changes
printf new1 >d/e/file1.txt &&
printf new2 >d/file2.txt &&
rm d/e/file2.txt &&
rm -r foo &&
printf text >foo &&
mkdir f &&
printf new1 >f/file1.txt &&
# including a mode-only change (counts as modified)
git update-index --chmod=+x mode/script.sh &&
git add foo d f &&
git commit -m "complicated" &&
# start from scratch and rebuild
rm -f .git/objects/info/commit-graph &&
GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=10 \
GIT_TRACE2_EVENT="$(pwd)/trace-edit" \
git commit-graph write --reachable --changed-paths &&
test_max_changed_paths 10 trace-edit &&
test_filter_computed 2 trace-edit &&
test_filter_trunc_large 2 trace-edit &&
for path in $(git ls-tree -r --name-only HEAD)
do
git -c commitGraph.readChangedPaths=false log \
-- $path >expect &&
git log -- $path >actual &&
test_cmp expect actual || return 1
done &&
# start from scratch and rebuild
rm -f .git/objects/info/commit-graph &&
GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=11 \
GIT_TRACE2_EVENT="$(pwd)/trace-update" \
git commit-graph write --reachable --changed-paths &&
test_max_changed_paths 11 trace-update &&
test_filter_computed 2 trace-update &&
test_filter_trunc_large 0 trace-update &&
for path in $(git ls-tree -r --name-only HEAD)
bloom: fix logic in get_bloom_filter() The get_bloom_filter() method is a bit complicated in some parts where it does not need to be. In particular, it needs to return a NULL filter only when compute_if_not_present is zero AND the filter data cannot be loaded from a commit-graph file. This currently happens by accident because the commit-graph does not load changed-path Bloom filters from an existing commit-graph when writing a new one. This will change in a later patch. Also clean up some style issues while we are here. One side-effect of returning a NULL filter is that the filters that are reported as "too large" will now be reported as NULL insead of length zero. This case was not properly covered before, so add a test. Further, remote the counting of the zero-length filters from revision.c and the trace2 logs. Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:23 +00:00
do
bloom/diff: properly short-circuit on max_changes Commit e3696980 (diff: halt tree-diff early after max_changes, 2020-03-30) intended to create a mechanism to short-circuit a diff calculation after a certain number of paths were modified. By incrementing a "num_changes" counter throughout the recursive ll_diff_tree_paths(), this was supposed to match the number of changes that would be written into the changed-path Bloom filters. Unfortunately, this was not implemented correctly and instead misses simple cases like file modifications. This then does not stop very large changed-path filters from being written (unless they add or remove many files). To start, change the implementation in ll_diff_tree_paths() to instead use the global diff_queue_diff struct's 'nr' member as the count. This is a way to simplify the logic instead of making more mistakes in the complicated diff code. This has a drawback: the diff_queue_diff struct only lists the paths corresponding to blob changes, not their leading directories. Thus, get_or_compute_bloom_filter() needs an additional check to see if the hashmap with the leading directories becomes too large. One reason why this was not caught by test cases was that the test in t4216-log-bloom.sh that was supposed to check this "too many changes" condition only checked this on the initial commit of a repository. The old logic counted these values correctly. Update this test in a few ways: 1. Use GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS to reduce the limit, allowing smaller commits to engage with this logic. 2. Create several interesting cases of edits, adds, removes, and mode changes (in the second commit). By testing both sides of the inequality with the *_MAX_CHANGED_PATHS variable, we can see that the count is exactly correct, so none of these changes are missed or over-counted. 3. Use the trace2 data value filter_found_large to verify that these commits are on the correct side of the limit. Another way to verify the behavior is correct is through performance tests. By testing on my local copies of the Git repository and the Linux kernel repository, I could measure the effect of these short-circuits when computing a fresh commit-graph file with changed-path Bloom filters using the command GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS=N time \ git commit-graph write --reachable --changed-paths and reporting the wall time and resulting commit-graph size. For Git, the results are | | N=1 | N=10 | N=512 | |--------|----------------|----------------|----------------| | HEAD~1 | 10.90s 9.18MB | 11.11s 9.34MB | 11.31s 9.35MB | | HEAD | 9.21s 8.62MB | 11.11s 9.29MB | 11.29s 9.34MB | For Linux, the results are | | N=1 | N=20 | N=512 | |--------|----------------|---------------|---------------| | HEAD~1 | 61.28s 64.3MB | 76.9s 72.6MB | 77.6s 72.6MB | | HEAD | 49.44s 56.3MB | 68.7s 65.9MB | 69.2s 65.9MB | Naturally, the improvement becomes much less as the limit grows, as fewer commits satisfy the short-circuit. Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-16 18:07:52 +00:00
git -c commitGraph.readChangedPaths=false log \
-- $path >expect &&
git log -- $path >actual &&
bloom: fix logic in get_bloom_filter() The get_bloom_filter() method is a bit complicated in some parts where it does not need to be. In particular, it needs to return a NULL filter only when compute_if_not_present is zero AND the filter data cannot be loaded from a commit-graph file. This currently happens by accident because the commit-graph does not load changed-path Bloom filters from an existing commit-graph when writing a new one. This will change in a later patch. Also clean up some style issues while we are here. One side-effect of returning a NULL filter is that the filters that are reported as "too large" will now be reported as NULL insead of length zero. This case was not properly covered before, so add a test. Further, remote the counting of the zero-length filters from revision.c and the trace2 logs. Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-01 13:27:23 +00:00
test_cmp expect actual || return 1
done
)
'
bloom: encode out-of-bounds filters as non-empty When a changed-path Bloom filter has either zero, or more than a certain number (commonly 512) of entries, the commit-graph machinery encodes it as "missing". More specifically, it sets the indices adjacent in the BIDX chunk as equal to each other to indicate a "length 0" filter; that is, that the filter occupies zero bytes on disk. This has heretofore been fine, since the commit-graph machinery has no need to care about these filters with too few or too many changed paths. Both cases act like no filter has been generated at all, and so there is no need to store them. In a subsequent commit, however, the commit-graph machinery will learn to only compute Bloom filters for some commits in the current commit-graph layer. This is a change from the current implementation which computes Bloom filters for all commits that are in the layer being written. Critically for this patch, only computing some of the Bloom filters means adding a third state for length 0 Bloom filters: zero entries, too many entries, or "hasn't been computed". It will be important for that future patch to distinguish between "not representable" (i.e., zero or too-many changed paths), and "hasn't been computed". In particular, we don't want to waste time recomputing filters that have already been computed. To that end, change how we store Bloom filters in the "computed but not representable" category: - Bloom filters with no entries are stored as a single byte with all bits low (i.e., all queries to that Bloom filter will return "definitely not") - Bloom filters with too many entries are stored as a single byte with all bits set high (i.e., all queries to that Bloom filter will return "maybe"). These rules are sufficient to not incur a behavior change by changing the on-disk representation of these two classes. Likewise, no specification changes are necessary for the commit-graph format, either: - Filters that were previously empty will be recomputed and stored according to the new rules, and - old clients reading filters generated by new clients will interpret the filters correctly and be none the wiser to how they were generated. Clients will invoke the Bloom machinery in more cases than before, but this can be addressed by returning a NULL filter when all bits are set high. This can be addressed in a future patch. Note that this does increase the size of on-disk commit-graphs, but far less than other proposals. In particular, this is generally more efficient than storing a bitmap for which commits haven't computed their Bloom filters. Storing a bitmap incurs a penalty of one bit per commit, whereas storing explicit filters as above incurs a penalty of one byte per too-large or empty commit. In practice, these boundary commits likely occupy a small proportion of the overall number of commits, and so the size penalty is likely smaller than storing a bitmap for all commits. See, for example, these relative proportions of such boundary commits (collected by SZEDER Gábor): | Percentage of | commit-graph | | | commits modifying | file size | | ├────────┬──────────────┼───────────────────┤ pct. | | 0 path | >= 512 paths | before | after | change | ┌────────────────┼────────┼──────────────┼─────────┼─────────┼───────────┤ | android-base | 13.20% | 0.13% | 37.468M | 37.534M | +0.1741 % | | cmssw | 0.15% | 0.23% | 17.118M | 17.119M | +0.0091 % | | cpython | 3.07% | 0.01% | 7.967M | 7.971M | +0.0423 % | | elasticsearch | 0.70% | 1.00% | 8.833M | 8.835M | +0.0128 % | | gcc | 0.00% | 0.08% | 16.073M | 16.074M | +0.0030 % | | gecko-dev | 0.14% | 0.64% | 59.868M | 59.874M | +0.0105 % | | git | 0.11% | 0.02% | 3.895M | 3.895M | +0.0020 % | | glibc | 0.02% | 0.10% | 3.555M | 3.555M | +0.0021 % | | go | 0.00% | 0.07% | 3.186M | 3.186M | +0.0018 % | | homebrew-cask | 0.40% | 0.02% | 7.035M | 7.035M | +0.0065 % | | homebrew-core | 0.01% | 0.01% | 11.611M | 11.611M | +0.0002 % | | jdk | 0.26% | 5.64% | 5.537M | 5.540M | +0.0590 % | | linux | 0.01% | 0.51% | 63.735M | 63.740M | +0.0073 % | | llvm-project | 0.12% | 0.03% | 25.515M | 25.516M | +0.0050 % | | rails | 0.10% | 0.10% | 6.252M | 6.252M | +0.0027 % | | rust | 0.07% | 0.17% | 9.364M | 9.364M | +0.0033 % | | tensorflow | 0.09% | 1.02% | 7.009M | 7.010M | +0.0158 % | | webkit | 0.05% | 0.31% | 17.405M | 17.406M | +0.0047 % | (where the above increase is determined by computing a non-split commit-graph before and after this patch). Given that these projects are all "large" by commit count, the storage cost by writing these filters explicitly is negligible. In the most extreme example, android-base (which has 494,848 commits at the time of writing) would have its commit-graph increase by a modest 68.4 KB. Finally, a test to exercise filters which contain too many changed path entries will be introduced in a subsequent patch. Suggested-by: SZEDER Gábor <szeder.dev@gmail.com> Suggested-by: Jakub Narębski <jnareb@gmail.com> Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-18 02:59:44 +00:00
test_expect_success 'correctly report commits with no changed paths' '
git init empty &&
test_when_finished "rm -fr empty" &&
(
cd empty &&
git commit --allow-empty -m "initial commit" &&
GIT_TRACE2_EVENT="$(pwd)/trace.event" \
git commit-graph write --reachable --changed-paths &&
test_filter_computed 1 trace.event &&
test_filter_not_computed 0 trace.event &&
test_filter_trunc_empty 1 trace.event &&
test_filter_trunc_large 0 trace.event
)
'
bloom: fix `make sparse` warning * We need a `final_new_line` to make our source code as text file, per POSIX and C specification. * `bloom_filters` should be limited to interal linkage only Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-05-07 23:51:02 +00:00
test_done
Reference in a new issue Copy permalink