Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
/*
|
|
|
|
|
* LibXDiff by Davide Libenzi ( File Differential Library )
|
|
|
|
|
* Copyright (C) 2003 Davide Libenzi
|
|
|
|
|
*
|
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
|
* Lesser General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
2017-11-07 05:39:33 +00:00
|
|
|
* License along with this library; if not, see
|
|
|
|
|
* <http://www.gnu.org/licenses/>.
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
*
|
|
|
|
|
* Davide Libenzi <davidel@xmailserver.org>
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#if !defined(XDIFF_H)
|
|
|
|
|
#define XDIFF_H
|
|
|
|
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
|
|
extern "C" {
|
|
|
|
|
#endif /* #ifdef __cplusplus */
|
|
|
|
|
|
2017-10-26 06:15:51 +00:00
|
|
|
/* xpparm_t.flags */
|
|
|
|
|
#define XDF_NEED_MINIMAL (1 << 0)
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
|
2017-10-26 06:15:51 +00:00
|
|
|
#define XDF_IGNORE_WHITESPACE (1 << 1)
|
|
|
|
|
#define XDF_IGNORE_WHITESPACE_CHANGE (1 << 2)
|
|
|
|
|
#define XDF_IGNORE_WHITESPACE_AT_EOL (1 << 3)
|
2017-10-26 06:32:27 +00:00
|
|
|
#define XDF_IGNORE_CR_AT_EOL (1 << 4)
|
2017-10-26 06:15:51 +00:00
|
|
|
#define XDF_WHITESPACE_FLAGS (XDF_IGNORE_WHITESPACE | \
|
|
|
|
|
XDF_IGNORE_WHITESPACE_CHANGE | \
|
2017-10-26 06:32:27 +00:00
|
|
|
XDF_IGNORE_WHITESPACE_AT_EOL | \
|
|
|
|
|
XDF_IGNORE_CR_AT_EOL)
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
|
2017-10-26 06:15:51 +00:00
|
|
|
#define XDF_IGNORE_BLANK_LINES (1 << 7)
|
2012-02-19 23:36:55 +00:00
|
|
|
|
2017-10-26 06:15:51 +00:00
|
|
|
#define XDF_PATIENCE_DIFF (1 << 14)
|
|
|
|
|
#define XDF_HISTOGRAM_DIFF (1 << 15)
|
2012-02-19 23:36:55 +00:00
|
|
|
#define XDF_DIFF_ALGORITHM_MASK (XDF_PATIENCE_DIFF | XDF_HISTOGRAM_DIFF)
|
|
|
|
|
#define XDF_DIFF_ALG(x) ((x) & XDF_DIFF_ALGORITHM_MASK)
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
|
2017-10-26 06:15:51 +00:00
|
|
|
#define XDF_INDENT_HEURISTIC (1 << 23)
|
2016-04-19 15:21:30 +00:00
|
|
|
|
2017-10-26 06:15:51 +00:00
|
|
|
/* xdemitconf_t.flags */
|
2006-03-28 02:23:31 +00:00
|
|
|
#define XDL_EMIT_FUNCNAMES (1 << 0)
|
2011-10-09 11:36:57 +00:00
|
|
|
#define XDL_EMIT_FUNCCONTEXT (1 << 2)
|
2006-03-28 02:23:31 +00:00
|
|
|
|
2008-08-28 08:10:04 +00:00
|
|
|
/* merge simplification levels */
|
xdiff: add xdl_merge()
This new function implements the functionality of RCS merge, but
in-memory. It returns < 0 on error, otherwise the number of conflicts.
Finding the conflicting lines can be a very expensive task. You can
control the eagerness of this algorithm:
- a level value of 0 means that all overlapping changes are treated
as conflicts,
- a value of 1 means that if the overlapping changes are identical,
it is not treated as a conflict.
- If you set level to 2, overlapping changes will be analyzed, so that
almost identical changes will not result in huge conflicts. Rather,
only the conflicting lines will be shown inside conflict markers.
With each increasing level, the algorithm gets slower, but more accurate.
Note that the code for level 2 depends on the simple definition of
mmfile_t specific to git, and therefore it will be harder to port that
to LibXDiff.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-21 22:24:34 +00:00
|
|
|
#define XDL_MERGE_MINIMAL 0
|
|
|
|
|
#define XDL_MERGE_EAGER 1
|
|
|
|
|
#define XDL_MERGE_ZEALOUS 2
|
2008-02-17 19:07:40 +00:00
|
|
|
#define XDL_MERGE_ZEALOUS_ALNUM 3
|
2008-08-28 08:10:04 +00:00
|
|
|
|
2008-06-20 07:17:27 +00:00
|
|
|
/* merge favor modes */
|
|
|
|
|
#define XDL_MERGE_FAVOR_OURS 1
|
|
|
|
|
#define XDL_MERGE_FAVOR_THEIRS 2
|
2010-03-01 21:46:25 +00:00
|
|
|
#define XDL_MERGE_FAVOR_UNION 3
|
2008-06-20 07:17:27 +00:00
|
|
|
|
2008-08-28 08:10:04 +00:00
|
|
|
/* merge output styles */
|
2010-03-01 21:46:26 +00:00
|
|
|
#define XDL_MERGE_DIFF3 1
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
|
|
|
|
|
typedef struct s_mmfile {
|
|
|
|
|
char *ptr;
|
|
|
|
|
long size;
|
|
|
|
|
} mmfile_t;
|
|
|
|
|
|
|
|
|
|
typedef struct s_mmbuffer {
|
|
|
|
|
char *ptr;
|
|
|
|
|
long size;
|
|
|
|
|
} mmbuffer_t;
|
|
|
|
|
|
|
|
|
|
typedef struct s_xpparam {
|
|
|
|
|
unsigned long flags;
|
2017-11-27 19:47:47 +00:00
|
|
|
|
|
|
|
|
/* See Documentation/diff-options.txt. */
|
|
|
|
|
char **anchors;
|
|
|
|
|
size_t anchors_nr;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
} xpparam_t;
|
|
|
|
|
|
|
|
|
|
typedef struct s_xdemitcb {
|
|
|
|
|
void *priv;
|
xdiff: provide a separate emit callback for hunks
The xdiff library always emits hunk header lines to our callbacks as
formatted strings like "@@ -a,b +c,d @@\n". This is convenient if we're
going to output a diff, but less so if we actually need to compute using
those numbers, which requires re-parsing the line.
In preparation for moving away from this, let's teach xdiff a new
callback function which gets the broken-out hunk information. To help
callers that don't want to use this new callback, if it's NULL we'll
continue to format the hunk header into a string.
Note that this function renames the "outf" callback to "out_line", as
well. This isn't strictly necessary, but helps in two ways:
1. Now that there are two callbacks, it's nice to use more descriptive
names.
2. Many callers did not zero the emit_callback_data struct, and needed
to be modified to set ecb.out_hunk to NULL. By changing the name of
the existing struct member, that guarantees that any new callers
from in-flight topics will break the build and be examined
manually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-02 06:35:01 +00:00
|
|
|
int (*out_hunk)(void *,
|
|
|
|
|
long old_begin, long old_nr,
|
|
|
|
|
long new_begin, long new_nr,
|
|
|
|
|
const char *func, long funclen);
|
|
|
|
|
int (*out_line)(void *, mmbuffer_t *, int);
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
} xdemitcb_t;
|
|
|
|
|
|
2007-07-06 07:45:10 +00:00
|
|
|
typedef long (*find_func_t)(const char *line, long line_len, char *buffer, long buffer_size, void *priv);
|
|
|
|
|
|
2012-05-09 20:20:55 +00:00
|
|
|
typedef int (*xdl_emit_hunk_consume_func_t)(long start_a, long count_a,
|
|
|
|
|
long start_b, long count_b,
|
|
|
|
|
void *cb_data);
|
|
|
|
|
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
typedef struct s_xdemitconf {
|
|
|
|
|
long ctxlen;
|
2008-12-28 18:45:32 +00:00
|
|
|
long interhunkctxlen;
|
2006-03-28 02:23:31 +00:00
|
|
|
unsigned long flags;
|
2007-07-06 07:45:10 +00:00
|
|
|
find_func_t find_func;
|
|
|
|
|
void *find_func_priv;
|
2012-05-09 20:20:55 +00:00
|
|
|
xdl_emit_hunk_consume_func_t hunk_func;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
} xdemitconf_t;
|
|
|
|
|
|
|
|
|
|
typedef struct s_bdiffparam {
|
|
|
|
|
long bsize;
|
|
|
|
|
} bdiffparam_t;
|
|
|
|
|
|
|
|
|
|
|
xdiff: use xmalloc/xrealloc
Most of xdiff uses a bare malloc() to allocate memory, and returns an
error when we get NULL. However, there are a few spots which don't check
the return value and may segfault, including at least xdl_merge() and
xpatience.c's find_longest_common_sequence().
Let's use xmalloc() everywhere instead, so that we get a graceful die()
for these cases, without having to do further auditing. This does mean
the existing cases which check errors will now die() instead of
returning an error up the stack. But:
- that's how the rest of Git behaves already for malloc errors
- all of the callers of xdi_diff(), etc, die upon seeing an error
So while we might one day want to fully lib-ify the diff code and make
it possible to use as part of a long-running process, we're not close to
that now. And because we're just tweaking the xdl_malloc() macro here,
we're not really moving ourselves any further away from that. We
could, for example, simplify some of the functions which handle malloc()
errors which can no longer occur. But that would probably be taking us
in the wrong direction.
This also makes our malloc handling more consistent with the rest of
Git, including enforcing GIT_ALLOC_LIMIT and trying to reclaim pack
memory when needed.
Reported-by: 王健强 <jianqiang.wang@securitygossip.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-11 13:49:25 +00:00
|
|
|
#define xdl_malloc(x) xmalloc(x)
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
#define xdl_free(ptr) free(ptr)
|
xdiff: use xmalloc/xrealloc
Most of xdiff uses a bare malloc() to allocate memory, and returns an
error when we get NULL. However, there are a few spots which don't check
the return value and may segfault, including at least xdl_merge() and
xpatience.c's find_longest_common_sequence().
Let's use xmalloc() everywhere instead, so that we get a graceful die()
for these cases, without having to do further auditing. This does mean
the existing cases which check errors will now die() instead of
returning an error up the stack. But:
- that's how the rest of Git behaves already for malloc errors
- all of the callers of xdi_diff(), etc, die upon seeing an error
So while we might one day want to fully lib-ify the diff code and make
it possible to use as part of a long-running process, we're not close to
that now. And because we're just tweaking the xdl_malloc() macro here,
we're not really moving ourselves any further away from that. We
could, for example, simplify some of the functions which handle malloc()
errors which can no longer occur. But that would probably be taking us
in the wrong direction.
This also makes our malloc handling more consistent with the rest of
Git, including enforcing GIT_ALLOC_LIMIT and trying to reclaim pack
memory when needed.
Reported-by: 王健强 <jianqiang.wang@securitygossip.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-11 13:49:25 +00:00
|
|
|
#define xdl_realloc(ptr,x) xrealloc(ptr,x)
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
|
|
|
|
|
void *xdl_mmfile_first(mmfile_t *mmf, long *size);
|
|
|
|
|
long xdl_mmfile_size(mmfile_t *mmf);
|
|
|
|
|
|
|
|
|
|
int xdl_diff(mmfile_t *mf1, mmfile_t *mf2, xpparam_t const *xpp,
|
|
|
|
|
xdemitconf_t const *xecfg, xdemitcb_t *ecb);
|
|
|
|
|
|
2010-01-17 05:01:28 +00:00
|
|
|
typedef struct s_xmparam {
|
|
|
|
|
xpparam_t xpp;
|
2010-01-17 05:30:18 +00:00
|
|
|
int marker_size;
|
2010-03-01 21:46:26 +00:00
|
|
|
int level;
|
|
|
|
|
int favor;
|
|
|
|
|
int style;
|
2010-03-21 00:31:44 +00:00
|
|
|
const char *ancestor; /* label for orig */
|
2010-03-21 00:35:18 +00:00
|
|
|
const char *file1; /* label for mf1 */
|
|
|
|
|
const char *file2; /* label for mf2 */
|
2010-01-17 05:01:28 +00:00
|
|
|
} xmparam_t;
|
|
|
|
|
|
2010-01-17 05:30:18 +00:00
|
|
|
#define DEFAULT_CONFLICT_MARKER_SIZE 7
|
|
|
|
|
|
2010-03-21 00:35:18 +00:00
|
|
|
int xdl_merge(mmfile_t *orig, mmfile_t *mf1, mmfile_t *mf2,
|
2010-03-01 21:46:26 +00:00
|
|
|
xmparam_t const *xmp, mmbuffer_t *result);
|
xdiff: add xdl_merge()
This new function implements the functionality of RCS merge, but
in-memory. It returns < 0 on error, otherwise the number of conflicts.
Finding the conflicting lines can be a very expensive task. You can
control the eagerness of this algorithm:
- a level value of 0 means that all overlapping changes are treated
as conflicts,
- a value of 1 means that if the overlapping changes are identical,
it is not treated as a conflict.
- If you set level to 2, overlapping changes will be analyzed, so that
almost identical changes will not result in huge conflicts. Rather,
only the conflicting lines will be shown inside conflict markers.
With each increasing level, the algorithm gets slower, but more accurate.
Note that the code for level 2 depends on the simple definition of
mmfile_t specific to git, and therefore it will be harder to port that
to LibXDiff.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-21 22:24:34 +00:00
|
|
|
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 04:13:22 +00:00
|
|
|
#ifdef __cplusplus
|
|
|
|
|
}
|
|
|
|
|
#endif /* #ifdef __cplusplus */
|
|
|
|
|
|
|
|
|
|
#endif /* #if !defined(XDIFF_H) */
|